Éditeur(s) : Elsevier
Résumé : We report on a multidisciplinary study of cold seeps explored in the Central Nile deep-sea fan of the Egyptian margin. Our approach combines in situ seafloor observation, geophysics, sedimentological data, measurement of bottom-water methane anomalies, pore-water and sediment geochemistry, and Th-230/U dating of authigenic carbonates. Two areas were investigated, which correspond to different sedimentary provinces. The lower slope, at similar to 2100 m water depth, indicates deformation of sediments by gravitational processes, exhibiting slope-parallel elongated ridges and seafloor depressions. In contrast, the middle slope, at similar to 1650 m water depth, exhibits a series of debris-flow deposits not remobilized by post-depositional gravity processes. Significant differences exist between fluid-escape structures from the two studied areas. At the lower slope, methane anomalies were detected in bottom-waters above the depressions, whereas the adjacent ridges show a frequent coverage of fractured carbonate pavements associated with chemosynthetic vent communities. Carbonate U/Th age dates (similar to 8 kyr BP), pore-water sulphate and solid phase sediment data suggest that seepage activity at those carbonate ridges has decreased over the recent past. In contrast, large (similar to 1 km(2)) carbonate-paved areas were discovered in the middle slope, with U/Th isotope evidence for ongoing carbonate precipitation during the Late Holocene (since similar to 5 kyr BP at least). Our results suggest that fluid venting is closely related to sediment deformation in the Central Nile margin. It is proposed that slope instability leads to focused fluid flow in the lower slope and exposure of 'fossil' carbonate ridges, whereas pervasive diffuse flow prevails at the unfailed middle slope.
Marine Geology (0025-3227) (Elsevier), 2009-06 , Vol. 261 , N. 1-4 , P. 92-104

Droits : 2009 Elsevier B.V. All rights reserved.
http://archimer.ifremer.fr/doc/2009/publication-6586.pdf
DOI:10.1016/j.margeo.2008.10.008
http://archimer.ifremer.fr/doc/00000/6586/

Éditeur(s) : HAL CCSD AGU and the Geochemical Society
Résumé : International audience
Microbathymetry data, in situ observations, and sampling along the 13°20′N and 13°20′N oceanic core complexes (OCCs) reveal mechanisms of detachment fault denudation at the seafloor, links between tectonic extension and mass wasting, and expose the nature of corrugations, ubiquitous at OCCs. In the initial stages of detachment faulting and high-angle fault, scarps show extensive mass wasting that reduces their slope. Flexural rotation further lowers scarp slope, hinders mass wasting, resulting in morphologically complex chaotic terrain between the breakaway and the denuded corrugated surface. Extension and drag along the fault plane uplifts a wedge of hangingwall material (apron). The detachment surface emerges along a continuous moat that sheds rocks and covers it with unconsolidated rubble, while local slumping emplaces rubble ridges overlying corrugations. The detachment fault zone is a set of anostomosed slip planes, elongated in the along-extension direction. Slip planes bind fault rock bodies defining the corrugations observed in microbathymetry and sonar. Fault planes with extension-parallel stria are exposed along corrugation flanks, where the rubble cover is shed. Detachment fault rocks are primarily basalt fault breccia at 13°20′N OCC, and gabbro and peridotite at 13°30′N, demonstrating that brittle strain localization in shallow lithosphere form corrugations, regardless of lithologies in the detachment zone. Finally, faulting and volcanism dismember the 13°30′N OCC, with widespread present and past hydrothermal activity (Semenov fields), while the Irinovskoe hydrothermal field at the 13°20′N core complex suggests a magmatic source within the footwall. These results confirm the ubiquitous relationship between hydrothermal activity and oceanic detachment formation and evolution.
ISSN: 1525-2027

hal-01571973
https://hal.archives-ouvertes.fr/hal-01571973
https://hal.archives-ouvertes.fr/hal-01571973v2/document
https://hal.archives-ouvertes.fr/hal-01571973/file/Escart-n_et_al-2017-Geochemistry%2C_Geophysics%2C_Geosystems.pdf
DOI : 10.1002/2016GC006775

Éditeur(s) : Amer Geophysical Union
Résumé : New high-resolution multichannel seismic data (GWADASEIS-2009 and JC45/46-2010 cruises; 72 and 60 channels, respectively) combined with previous data (AGUADOMAR-1999 and CARAVAL-2002; 6 and 24 channels, respectively) allow a detailed investigation of mass-wasting processes around the volcanic island of Montserrat in the Lesser Antilles. Seven submarine deposits have sources on the flanks of Montserrat, while three are related to the nearby Kahouanne submarine volcanoes. The most voluminous deposit (similar to 20 km(3)) within the Bouillante-Montserrat half-graben has not been described previously and is probably related to a flank instability of the Centre Hills Volcano on Montserrat, while other events are related to the younger South Soufriere Hills-Soufriere Hills volcanic complex. All deposits are located to the south or southeast of the island in an area delimited by faults of the Bouillante-Montserrat half-graben. They cover a large part of the southeast quarter of the surrounding seafloor (similar to 520 km(2)), with a total volume of similar to 40 km(3). Our observations suggest that the Bouillante-Montserrat half-graben exerts a control on the extent and propagation of the most voluminous deposits. We propose an interpretation for mass-wasting processes around Montserrat similar to what has happened for the southern islands of the Lesser Antilles.
Geochemistry Geophysics Geosystems (1525-2027) (Amer Geophysical Union), 2011-05 , Vol. 12 , N. 5 , P. Q05006

Droits : Copyright 2011 by the American Geophysical Union
http://archimer.ifremer.fr/doc/00200/31100/29510.pdf
DOI:10.1029/2010GC003451
http://archimer.ifremer.fr/doc/00200/31100/

Éditeur(s) : Elsevier Sci Ltd
Résumé : Several marine geophysical data and piston-coring surveys acquired during the last decade allow one to better understand the close dynamic interactions between the sand-rich Orinoco turbidite system and the compressional structures of the Barbados prism. These interactions have been active since Eocene time as illustrated by the study of outcrops onshore Barbados Island. Because of strong morphologic and tectonic control in the east-Caribbean active margin, the present-day Orinoco turbiditic pattern system does not exhibit a classic fan geometry. The sea-floor geometry between the slope of the front of the Barbados prism and the slope of the South-American margin induces the convergence of the turbidite channels toward the abyssal plain, at the front of the accretionary prism. Also, whereas in most passive margins the turbidite systems are organized upstream to downstream as canyon, channel-levee and lobes, here, due to the tectonic control, the sedimentary system is organized upstream to downstream as channel-levee, canyons and channelized lobes. Indeed, at the edge of the Orinoco platform, the system has multiple sources with several distributaries and downstream the channel courses are complex with frequent convergences or divergences that are emphasized by the effects of the undulating seafloor tectonic morphologies associated with active thrust tectonics and mud volcanism. On top of the accretionary prism, turbidite sediments are filling transported piggy-back basins whose timing of sedimentation vs. deformation is complex. While erosion processes are almost absent on the highly subsiding Orinoco platform and in the upper part of the turbidite system, they develop mostly between 2000 and 4000 m of water depth, above the compressional structures of the Barbados prism (canyons up to 3 km wide and 300 m deep). In the abyssal plain, the main turbiditic channel develops toward the east and connects with the Vidal mid-Atlantic channel. The sediments transported in this channel are filling several elongated basins linked with fracture zones (notably the Barracuda Basin), and finally end their course in the Puerto-Rico trench, the deepest morphologic depression of the region. Piston-cores have demonstrated that turbidite sediments above the accretionary prism and in the abyssal plain are mostly coarse sandy deposits covered by recent pelagic planktonic-rich sediments, which corresponds to slower sand deposition during the post-glacial sea level rise. Numerical stratigraphic modelling suggests that during the last glacial event, the main depocentres were located above the tectonic prism and in the abyssal plain, at the front of the prism and that, during the Holocene eustatic rise, a large accommodation space formed on the shelf confining sedimentation mostly on the Orinoco deltaic platform and producing a starvation downstream in the turbidite system.
Marine And Petroleum Geology (0264-8172) (Elsevier Sci Ltd), 2015-06 , Vol. 64 , P. 76-103

Droits : 2015 Elsevier Ltd. All rights reserved.
http://archimer.ifremer.fr/doc/00252/36373/34913.pdf
DOI:10.1016/j.marpetgeo.2014.12.015
http://archimer.ifremer.fr/doc/00252/36373/

Éditeur(s) : HAL CCSD Wiley-Blackwell
Résumé : International audience
A comprehensive model for the activity of the elementary accretion segment at fast-spreading ridges relies on integration of structural data from the Oman ophiolite and geophysical results from the East Pacific Rise (EPR) around 9°N, which are of comparable size and spreading rates. The axial melt lens at shallow crustal level provides a link between Deval segmentation at the seafloor and a lower melt sill at Moho level, imaged at the EPR as a crustal melt zone (CMZ) and mapped in Oman as the Moho transition zone (MTZ). Both are attached to a mantle upwelling at the EPR, and to a frozen diapir in Oman. The physical link between diapiric mantle uprising at the Moho and Devals segmentation at the seafloor is the melt being injected from the mantle into the lower MTZ, ponding there, and then being released by powerful injections into the upper melt lens. The magma chamber covers the diapir at a distance of 5 km from the ridge axis.
ISSN: 0954-4879

hal-01171958
https://hal.archives-ouvertes.fr/hal-01171958
DOI : 10.1111/ter.12137

Éditeur(s) : American Geophysical Union
Résumé : We present new high-resolution bathymetry and backscatter data acquired in 2006 with the ROV Victor 6000 over the Lucky Strike hydrothermal field, Mid-Atlantic Ridge. As long-term monitoring of the Lucky Strike area (MoMAR project) is being implemented, these new high-resolution data offer an unprecedented view of the distribution of hydrothermal edifices, eruptive facies, and small-scale tectonic features in the Lucky Strike vent field. We show that vents located in the NW and NE correspond with wide expanses of lumpy seafloor which we interpret as primarily made of broken chimneys and sulfide edifices. They are found above scarps with relief > 50 m or on associated mass wasting deposits. By contrast, the SE and SW vents correspond with small expanses of lumpy seafloor and are located near smaller scarps which we interpret as more recent faults. Hydrothermal edifices in the SW venting area appear very recent, postdating the emplacement and faulting of the most recent lava. We propose that this difference in the age of hydrothermal edifices does not mean that hydrothermal venting itself is more recent in the southern part of the Lucky Strike field because preexisting sulfide deposits there may have been buried by recent volcanic deposits. Instead, the older edifices in the northern part of the hydrothermal field may have been allowed more time to grow because they are set above the level of recent lava flows. The formation of a lava lake is the most recent eruptive event detected at Lucky Strike. Lava drainback is evidenced by benches and lava pillars, suggesting a close connection with an underlying magma reservoir, which probably corresponds to the melt body imaged by Singh et al. (2006). We have found no evidence that this lake was active for months to decades, as lava lakes at terrestrial volcanoes. It may instead have formed as a lava pond, with successive lava flows covering the eruptive vents, as proposed for similar features at the EPR. The horizontal surface of the lake is deformed only near its southwestern shore, along a NNE-trending set of faults and fissures, which appear to control the distribution of hydrothermal chimneys.
Geochemistry Geophysics Geosystems (1525-2027) (American Geophysical Union), 2009-02 , Vol. 10 , N. 2 , P. 1-18

Droits : 2009 American Geophysical Union
http://archimer.ifremer.fr/doc/2009/publication-6161.pdf
DOI:10.1029/2008GC002171
http://archimer.ifremer.fr/doc/00000/6161/

Éditeur(s) : HAL CCSD
Résumé : 38 pages
Rapport
The Chicxulub impact crater, México, is unique. It is the only known terrestrial impact structure that has been directly linked to a mass extinction event and the only terrestrial impact with a global ejecta layer. Of the three largest impact structures on Earth, Chicxulub is the best preserved. Chicxulub is also the only known terrestrial impact structure with an intact, unequivocal topographic peak ring. Chicxulub’s role in the Cretaceous/Paleogene (K-Pg) mass extinction and its exceptional state of preservation make it an important natural laboratory for the study of both large impact crater formation on Earth and other planets and the effects of large impacts on the Earth’s environment and ecology. Our understanding of the impact process is far from complete, and despite more than 30 years of intense debate, we are still striving to answer the question as to why this impact was so catastrophic.During International Ocean Discovery Program (IODP) Expedition 364, Paleogene sediments and lithologies that make up the Chicxulub peak ring were cored to investigate (1) the nature and formational mechanism of peak rings, (2) how rocks are weakened during large impacts, (3) the nature and extent of post-impact hydrothermal circulation, (4) the deep biosphere and habitability of the peak ring, and (5) the recovery of life in a sterile zone. Other key targets included sampling the transition through a rare midlatitude section that might include Eocene and Paleocene hyperthermals and/or the Paleocene/Eocene Thermal Maximum (PETM); the composition and character of the impact breccias, melt rocks, and peak-ring rocks; the sedimentology and stratigraphy of the Paleocene–Eocene Chicxulub impact basin infill; the chronology of the peak-ring rocks; and any observations from the core that may help us constrain the volume of dust and climatically active gases released into the stratosphere by this impact. Petrophysical property measurements on the core and wireline logs acquired during Expedition 364 will be used to calibrate geophysical models, including seismic reflection and potential field data, and the integration of all the data will calibrate impact crater models for crater formation and environmental effects. The proposed drilling directly contributes to IODP Science Plan goals:Climate and Ocean Change: How resilient is the ocean to chemical perturbations? The Chicxulub impact represents an external forcing event that caused a 75% level mass extinction. The impact basin may also record key hyperthermals within the Paleogene.Biosphere Frontiers: What are the origin, composition, and global significance of subseafloor communities? What are the limits of life in the subseafloor? How sensitive are ecosystems and biodiversity to environmental change? Impact craters can create habitats for subsurface life, and Chicxulub may provide information on potential habitats for life, including extremophiles, on the early Earth and other planetary bodies. Paleontological and geochemical studies at ground zero will document how large impacts affect ecosystems and effects on biodiversity.Earth Connections/Earth in Motion: What are the composition, structure and dynamics of Earth’s upper mantle? What mechanisms control the occurrence of destructive earthquakes, landslides, and tsunami? Mantle uplift in response to impacts provides insight into dynamics that differ between Earth and other rocky planets. Impacts generate earthquakes, landslides, and tsunami, and scales that generally exceed plate tectonic processes yield insight into effects, the geologic record, and potential hazards.IODP Expedition 364 was a Mission Specific Platform expedition to obtain subseabed samples and downhole logging measurements from the sedimentary cover sequence and peak ring of the Chicxulub impact crater. A single borehole was drilled into the Chicxulub impact crater on the Yucatán continental shelf, recovering core from 505.7 to 1334.73 m below seafloor with ~99% core recovery and acquiring downhole logs for the entire depth.
International Ocean Discovery Program

hal-01639520
https://hal.archives-ouvertes.fr/hal-01639520
DOI : 10.14379/iodp.pr.364.2017

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Polygonal faulting is a widespread phenomenon in sedimentary basins worldwide. It changes basin-scale fluid flow patterns and alters the physical properties of the sediments making it important for hydrocarbon exploration and geohazard analysis. It is generally accepted that polygonal fault patterns derive from dewatering and compaction of the host sediments, but there is debate regarding the processes that control polygonal faulting. New multibeam-bathymetry data from the Hatton Basin, NE Atlantic, show up to 10 m deep and 200-600 m wide troughs at the seabed. They connect to each other forming polygons that are several hundred metres across, i.e. of similar size as buried polygonal fault systems observed in 3D seismic data. The troughs are symmetrical and resemble elongated pockmarks. Previously unpublished high-resolution 2D seismic data from the same area show seismic disturbance zones similar to pipes observed under pockmarks elsewhere as well as faults that have all the characteristics of polygonal fault systems. The observation of the wide disturbance zones is enigmatic, as they appear to follow the polygonal seafloor pattern. The observed extent of the polygonal sediment contraction system is substantial covering almost 37,000 km2. We calculate that some 2600 km3 of possibly carbon-bearing fluids have been expelled from this system and we expect that this will affect the benthic ecosystems, although so far there is only limited evidence for chemosynthetic habitats.
ISSN: 0025-3227

hal-00772468
https://hal.archives-ouvertes.fr/hal-00772468
DOI : 10.1016/j.margeo.2012.09.013

Éditeur(s) : HAL CCSD
Résumé : International audience
https://hal.archives-ouvertes.fr/hal-01436542

hal-01436542
https://hal.archives-ouvertes.fr/hal-01436542
DOI : 10.1109/IGARSS.2011.6049595

Éditeur(s) : HAL CCSD IODP
Résumé : Integrated Ocean Drilling Program (IODP) Expedition 335 (14 April–4 June 2011) will be the fourth ocean cruise of the "Superfast" campaign to drill a deep hole into intact oceanic basement and will return to Ocean Drilling Program (ODP) Hole 1256D to deepen this scientific reference penetration a significant distance into cumulate gabbros. Cores and data recovered during the Superfast 4 expedition will provide hitherto unavailable observations that will test models of the accretion and evolution of the oceanic crust. Site 1256 was specifically located on oceanic crust that formed at a superfast spreading rate (>200 mm/y) to exploit the observed relationship between spreading rate and depth to axial low velocity zones, thought to be magma chambers, seismically imaged at active mid-ocean ridges. This was a deliberate strategy to reduce the drilling distance to gabbroic rocks because thick sequences of lavas and dikes have proved difficult to penetrate in past. ODP Leg 206 (2002) initiated operations at Site 1256, including the installation in Hole 1256D of a reentry cone with 16 inch casing inserted through the 250 m thick sedimentary cover and cemented into basement to facilitate deep drilling. The hole was then cored ~500 m into basement. IODP Expeditions 309 and 312 (2005) successfully completed the first sampling of an intact section of upper oceanic crust from lavas, through the sheeted dikes, and into the upper gabbros. Hole 1256D now penetrates >1500 meters below seafloor (mbsf) and >1250 m subbasement and currently resides in the dike–gabbro transition zone. The first gabbroic rocks were encountered at 1407 mbsf. Below this lies a ~100 m complex zone of fractionated gabbros intruded into contact metamorphosed dikes. Although previous cruises achieved the benchmark objective of reaching gabbro in intact ocean crust, critical scientific questions remain. These include the following: 1. Does the lower crust form by the recrystallization and subsidence of a high-level magma chamber (gabbro glacier), crustal accretion by intrusion of sills throughout the lower crust, or some other mechanism? 2. Is the plutonic crust cooled by conduction or hydrothermal circulation? 3. What is the geological nature of Layer 3 and the Layer 2/3 boundary at Site 1256? 4. What is the magnetic contribution of the lower crust to marine magnetic anomalies? Hole 1256D is poised at a depth where samples that should conclusively address these questions can be obtained, possibly with only a few hundred meters of drilling. Importantly, as of the end of Expedition 312, the hole was clear of debris and open to its full depth. Increased rates of penetration (1.2 m/h) and enhanced core recovery (>35%) in the gabbros indicate that this return to Hole 1256D could deepen the hole >300 m into plutonic rocks, past the transition from dikes to gabbro, and into a region of solely cumulate gabbroic rocks.
https://hal.archives-ouvertes.fr/hal-00564953

hal-00564953
https://hal.archives-ouvertes.fr/hal-00564953
DOI : 10.2204/iodp.sp.335.2010

Éditeur(s) : Geological Soc Amer, Inc
Résumé : Pockmarks are seafloor depressions commonly associated with fluid escape from the seabed and are believed to contribute noticeably to the transfer of methane into the ocean and ultimately into the atmosphere. They occur in many different areas and geological contexts, and vary greatly in size and shape. Nevertheless, the mechanisms of pockmark growth are still largely unclear. Still, seabed methane emissions contribute to the global carbon budget, and understanding such processes is critical to constrain future quantifications of seabed methane release at local and global scales. The giant Regab pockmark (9 degrees 42.6' E, 5 degrees 47.8' S), located at 3160 m water depth near the Congo deep-sea channel (offshore southwestern Africa), was investigated with state-of-the-art mapping devices mounted on IFREMER's (French Research Institute for Exploitation of the Sea) remotely operated vehicle (ROV) Victor 6000. ROV-borne micro-bathymetry and backscatter data of the entire structure, a high-resolution photo-mosaic covering 105,000 m(2) of the most active area, sidescan mapping of gas emissions, and maps of faunal distribution as well as of carbonate crust occurrence are combined to provide an unprecedented detailed view of a giant pockmark. All data sets suggest that the pockmark is composed of two very distinctive zones in terms of seepage intensity. We postulate that these zones are the surface expression of two fluid flow regimes in the subsurface: focused flow through a fractured medium and diffuse flow through a porous medium. We conclude that the growth of giant pockmarks is controlled by self-sealing processes and lateral spreading of rising fluids. In particular, partial redirection of fluids through fractures in the sediments can drive the pockmark growth in preferential directions.
Geology (0091-7613) (Geological Soc Amer, Inc), 2014-01 , Vol. 42 , N. 1 , P. 63-66

Droits : 2013 Geological Society of America
http://archimer.ifremer.fr/doc/00186/29731/28293.pdf
DOI:10.1130/G34801.1
http://archimer.ifremer.fr/doc/00186/29731/

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The analysis of field relationships between allochthonous crystalline slivers, ultramafic units and associated sedimentary cover in the high-pressure Schistes Lustrés units of northern Corsica allows reconstruction of the pre-orogenic architecture of a fossil Mesozoic Ocean-Continent Transition (OCT) of the Tethys basin. The studied area, encompassing the Serra di Pigno and Col de Téghime areas (Cap Corse) is composed of an assemblage of prealpine basement sheets made up of serpentinized mantle rocks, Permian gabbros and gneisses, locally associated with Paleozoic metabasites and micaschists. The sedimentary cover includes numerous intervals of calc-schists, marbles, quartzites, micaschists and dolomitic metabreccias yielding a great variety of lithostratigraphical successions. The metasedimentary sequences do not show affinities with the typical cover series of the Prépiémontais margin domains. This implies an origin from a more internal domain (oceanward) for the studied units. In addition, the sedimentary cover of the ultramafic basement units do not display the characters of the classical Alpine ophiolites but bear lithological features showing affinities with both continental and oceanic environments. We assume that the high variability of the sedimentary successions as well as the presence of a basement composed of continental and upper-mantle rocks is consistent with an origin at an OCT. The acidic basement slivers are regarded as former extensional allochthons of continental crust abandoned during breakup on a newly exhumed seafloor of peridotite composition. Such extensional allochthons, will then logically constitute the most internal continental slices buried at great depth during Alpine subduction. This work shows that a lot has to be expected from a revision of the Schistes Lustrés lithostratigraphy in the light of the new concepts of the evolution of the OCT domains.
ISSN: 0040-1951

hal-00795578
https://hal.archives-ouvertes.fr/hal-00795578
DOI : 10.1016/j.tecto.2012.06.013