Éditeur(s) : Amer Geophysical Union
Résumé : The Algerian margin has originated from the opening of the Algerian basin about 25-30 Ma ago. The central margin provides evidence for large-scale normal faults of Oligo-Miocene age, whereas transcurrent tectonics characterizes the western margin. A set of NW-SE oriented dextral transform faults was active during basin opening and divided the 600 km long central margin into segments of similar to 120-150 km. The upper Miocene, Plio-Quaternary, and present-day tectonic setting is, however, compressional and supports the occurrence of a margin inversion, a process still poorly documented worldwide. We show that the central Algerian margin represents a rare example of inverted margin, where the process of subduction inception is particularly well expressed and helps understand how extensional and transtensive structures are involved in margin shortening. Using multibeam bathymetry and multichannel seismic reflection sections from the MAR-ADJA 2003 and 2005 cruises, we evidence Pliocene-Pleistocene shortening with contrasting styles along the margin between west (Khayr Al Din bank) and east (Boumerdes-Dellys margin) of Algiers. Pre-Miocene structures such as basement highs and transform faults appear to control changes of the deformation pattern along this part of the margin, resulting in different widths, geometries, and relative positions of folds and faults. Plio-Quaternary and active blind thrust faults do not reuse Oligo-Miocene normal and transform faults during inversion, but instead grow within the continental margin (as testified for instance by the 21 May 2003 M-w 6.8 Boumerdes-Zemmouri earthquake), at the foot of the continental slope and at the northern sides of basement highs interpreted as stretched continental blocks of the rifted margin. The inherited structures of the margin appear, therefore, to determine this deformation pattern and ultimately the earthquake and tsunami sizes offshore. The complex geometry of the fault system along the Algerian margin suggests a process of initiation of subduction in its central and eastern parts.
Tectonics (0278-7407) (Amer Geophysical Union), 2010-03 , Vol. 29 , N. TC2008 , P. 1-22

Droits : 2010 American Geophysical Union
http://archimer.ifremer.fr/doc/00008/11883/9286.pdf
http://archimer.ifremer.fr/doc/00008/11883/9287.pdf
DOI:10.1029/2009TC002547
http://archimer.ifremer.fr/doc/00008/11883/

Éditeur(s) : HAL CCSD Springer
Résumé : International audience
We present here a synthesis of the evolution of rifted continental margin systems in the Gulf of Aden. These margins are volcanic to the west of the Gulf of Aden, where they are influenced by the Afar hotspot, and non-volcanic east of longitude 46° E. The combined use of magnetics, gravity, seismic reflection, field observations (tectonic, stratigraphic and sedimentological) and oil well data allowed us to obtain better constraints on the timing of continental rifting and seafloor spreading. From the Permo-Triassic to the Oligocene, the Arabian-African plate was subject to distributed extension, probably due, at least from the Cretaceous, to tensile stresses related to the subduction of the Tethysian slab in the north. In Late Eocene-Early Oligocene, 34-33 Ma ago, rifting started to localise along the future area of continental breakup. Initially guided by the inherited basins, continental rifting then occurred synchronously over the entire gulf before becoming localised on the northern and southern borders of the inherited grabens, in the direction of the Afar hotspot. In the areas with non-volcanic margins (in the east), the faults marking the end of rifting trend parallel to the inherited grabens. Only the transfer faults cross-cut the inherited grabens, and some of these faults later developed into transform faults. The most important of these transform faults follow a Precambrian trend. Volcanic margins were formed in the west of the Gulf, up to the Guban graben in the southeast and as far as the southern boundary of the Bahlaf graben in the northeast. Seaward dipping reflectors can be observed on many oil industry seismic profiles. The influence of the hotspot during rifting was concentrated on the western part of the gulf. Therefore, it seems that the western domain was uplifted and eroded at the onset of rifting, while the eastern domain was characterised by more continuous sedimentation. The phase of distributed deformation was followed by a phase of strain localisation during the final rifting stage, just before formation of the Ocean-Continent Transition (OCT), in the most distal graben (DIM graben). About 20 Ma ago, at the time of the continental break-up, the emplacement of the OCT started in the east with exhumation of the subcontinental mantle. Farther west, the system was heated up by the strong influence of the Afar hotspot, which led to breakup with much less extension. In the Gulf of Aden (s.str), up to the Shukra El Sheik fracture zone, oceanic spreading started 17.6 Ma ago. West of this fracture zone, oceanic accretion started 10 Ma ago, and 2 Ma ago in the Gulf of Tadjoura. Post-rift deformation of the eastern margins of the Gulf of Aden can be seen in the distal and proximal domains. Indeed, the substantial post-rift uplift of these margins could be associated with either the continental break-up, or activity of the Afar hotspot and related volcanic/magmatic activity. Uplift of the northern proximal margin was still active (e.g. stepped beach rocks exposed at 60 m of 2 Ma; 30 m of 35,200 years; 10 and 2 m) and active volcanoes can be inferred at depths of between 70 and 200 km beneath the margin (at 5-10 km distance from the coast). On the distal margin, heat flow measurements show a high value that is associated with post-rift volcanic activity and the development of a volcano (with flows and sills) shortly after the formation of the OCT. The Afar hotspot is therefore important for several reasons. It allows the localisation of deformation along the Red Sea/Aden system and the rapid opening of the Gulf after the continental break-up; its influence also seems to persist during the post-rift period.
ISSN: 1866-7411

hal-01053089
https://hal.archives-ouvertes.fr/hal-01053089
DOI : 10.1007/s12517-011-0475-4

Résumé : Arbusto o árbol de hasta 20 m. Hojas oblongas a anchamente aovadas, de 3 a 15 cm, agudas a acuminadas, aserradas, estrellado-tomentosas, marcadamente asimétricas. Flores amarillentas, fragantes, en cimas axilares pequeñas, con 5 pétalos de 3 mm. Fruto leñoso, globoso u oval, de 2 a 4 cm, con tubérculos duros.
Arbuste ou arbre pouvant atteindre 20 m. Feuilles oblongues à largement ovées, de 3 à 15 cm, aiguës à acuminées, dentées, en forme d’étoile, tomenteuses, très asymétriques. Fleurs jaunâtres, odorantes, sur de petites tiges axillaires, avec 5 pétales de 3 mm. Fruit ligneux, arrondi ou ovale, de 2 à 4 cm, avec tubercules fermes.
Tree deciduous up to 16 m tall with spreading branches. Leaves alternate 20 cm x 7 cm, lanceolate to ovate, unequal at the base, margins crenate-dentate, hairy from sub-glabrous to tomentose; inflorescence axillary in panicles, flowers 3 mm with five yellow-green petals, fragrant; fruit black, woody, warty, sub-globose 1-2 cm in diameter with the faint smell of molasses, seeds numerous.
Regiones tropicales del continente americano.
Régions tropicales du continent américain.
Tropical and sub-tropicalregions of the American continent.

http://www.tramil.net/fototeca/plant179

Éditeur(s) : Université de Bretagne Occidentale
Résumé : The objective of the present work is to study the formation of the passive continental margins of the Central Segment of the South Atlantic, most particularly the Congo and Angola margins. We propose a combined approach, which integrates structural constraints based on geological cross-sections (based on seismic data) and global constraints based on plate kinematic reconstructions. The structural study is based on : i) MCS and refraction data collected during the ZaiAngo programme (a joint project conducted by Ifremer and Total) ; ii) proprietary, industrial seismic data (courtesy of Total) from the Angola margin and iii) on all available seismic lines from the Africa and Brazil conjugated margins, between Walvis Ridge and the Equatorial Fracture Zones. Based on theses data, three structural domains (continental, transitional and oceanic) have been defined, the major characteristics of which are : Crustal thinning occurs abruptly, mostly below the continental slope, over a lateral distance of less than 50 km. The top of the crust deepens as the Moho shallows. Only a few extensional structures are observed ; tilted blocks are very few (one or two, depending on the profile), found only on the upper part of the slope and sealed by a discordance prior to salt deposition. The transitional domain is characterized by the existence of a pre-salt basin lying over a thin crustal layer. No tilted blocks are observed in this domain and reflectors within the pre-salt sediment series are parallel to the base of the Aptian salt, over distances greater than 100 km, precluding the possibility of any significant deformation that would imply large horizontal motions. Two types of crust are observed in the transitional domain. "Type I" crust is found below the undeformed pre-salt sediment series located below the eastern part of the basin ; it is characterized by an upper layer of thickness greater than 5 km and a abnormal velocity layer (7.2 - 7.6 km/s), up to 6 km thick. "Type II" crust is less than 5 km thick and found below the salt compressive front that affects the western part of the basin. The salt cover is continuous (no erosion surface is observed), from the continental shelf to the western termination of the basin. Salt was not deposited in a confined environment (like in the Mediterranean), but in a shallow water, lagunal environment. This imposes the zero-level and constrains the paleo-bathymetry at the time of salt deposition, which dates the latest stage of margin formation. Understanding the formation of a margin cannot be approached without studying the homolog margin. Therefore, it is of major importance to reconstruct the closure of the ocean bordered by these homolog margins and take into account the constraints imposed by the kinematic reconstructions on the lateral motions of the lithospheric plates. In order to assess the relative position of the plates at the ocean closure (prior to crustal thinning), a global study was thus performed, integrating all geophysical and geological constraints, in the ocean and on land. The role of african intra-plate deformation and its limits and their consequences have been thoroughly studied. To juxtapose the margins of the central segment of the Southern Atlantic, it is all the margins bordering the Equatorial Atlantic that need to be adjuste precisely. The kinematic study of this last region shows that the reconstruction obtained are reliable, unambiguous with a quantifiable precision The best fitting poles (obtained using the PLACA software), show that it is impossible to close the margins beyond the superposition of the salt fronts, from the Angola and Brazil margins. The geological cross-sections based on seismic data from the homolog margins indicate that a 330 km wide basin with thin (< 12 km) crust was present at the time of the fit. This basin cannot result from horizontal movement related to pure stretching or simple shear, or any model implying conservative volume. This conclusion is consistent with the existence of presalt reflectors parallel to the salt layer wich extends to the platform: the formation of the pre-salt basin must be related to vertical motions. The scenario that we propose for the evolution of the Congo-Angola margin consist in four stages: the first phase corresponds to extensional deformation limited to the few tilted blocks observed on the upper part of the slope. During the second phase, the main crustal thinning occurs, vertical motions prevailes, resulting in the formation of the continental slope and in the subsidence of the basin. The third phase corresponds to the first stress striction: deformation is concentrated in a limited section of the basin, which corresponds to the salt compression front. A proto-oceanic crust is formed, probably composed of thinned continental crust intruded by mantle material. The second stress striction corresponds to the finale phase, resulting in oceanisation senso stricto. The evolution described shows that we can not apply conservative models for margin formation (such as McKenzie and Wernicke or any of their avatars). In order to explain this thinning, one should investigate non-conservative models (implying geochemical transformation, small scale convection, intrusion...) such as those proposed in marginal or continental basins with no horizontal movments.
Ce travail de thèse aborde la formation des marges continentales passives dans le segment central de l'océan Atlantique Sud (plus particulièrement au Congo et en Angola), en intégrant une étude en coupe (étude structurale à partir des coupes sismiques) et une étude en plan (étude cinématique). L'étude structurale de la marge a été réalisée à partir des données de sismique réflexion et réfraction de la campagne Zaïango et d'une compilation de données sismiques réflexion existantes sur toutes les marges africaine et brésilienne entre les zones de fracture équatoriales et la ride de Walvis. L'interprétation de ces données a permis d'individualiser la structure de la marge en trois domaines : continental, transitionnel et océanique et de déterminer quelques points majeurs sur la structuration de la marge. L'amincissement est abrupt, localisé dans la zone de pente continentale et restreint à 50 km. La marge montre peu de structures distensives : seuls un ou deux blocs basculés sont observés en haut de pente continentale. Le domaine transitionnel est caractérisé par la géométrie particulière de la sédimentation anté-salifère, l'absence de blocs basculés et la faible épaisseur de croûte. La couche sédimentaire anté-salifère montre des réflecteurs plans jusqu'à la base du sel, continus sur 100 km, éliminant toutes possibilités de déformation du socle pendant et après son dépôt. La croûte du domaine transitionnel peut-être divisée en deux types : une croûte de type I sur laquelle se déposent les sédiments non déformés, et une croûte de type II sur laquelle se superposent les limites du « front compressif salifère » bien exprimé dans les séries postsalifères. Enfin le sel, que l'on observe depuis la plate-forme jusqu'au bassin profond, ne se dépose pas dans un bassin confiné (comme en Méditerranée) mais à un niveau proche de 0 m (ressemblant probablement à un dépôt de type lagunaire) et donne la paléo-bathymétrie au moment de son dépôt qui marque la fin de la période de formation de la marge. La compréhension de la genèse d'une marge ne peut être approchée sans son homologue. Cette simple constatation, cette évidence, montre toute l'importance que l'on doit apporter à la reconstruction cinématique initiale de l'océan qui borde ces marges homologues et aux contraintes imposées par les reconstructions cinématiques sur les mouvements horizontaux des plaques lithosphériques. Afin d'étudier la position des marges au moment de cette fermeture, c'est-à-dire avant amincissement, une étude globale intégrant l'ensemble des données disponibles, géophysiques et géologiques, océaniques et continentales, a été réalisée. Le rôle de la déformation intraplaque africaine, ses limites et leurs conséquences a, en particulier, été l'objet d'une attention poussée. Pour juxtaposer les marges du segment central, ce sont toutes les marges de l'océan Atlantique Equatorial qui doivent être ajustées précisément. L'étude cinématique réalisée de la région équatoriale montre que l'on obtient une reconstruction fiable et sans ambiguïté, avec une précision que l'on peut quantifier. Les pôles issus de cette étude (et calculés avec le Logiciel PLACA) indiquent qu'il est impossible d'obtenir une fermeture plus serrée que celle qui conduit à la superposition des fronts salifères brésilien et angolais : les coupes issues de la sismique réflexion des deux marges indiquent qu'il subsiste un bassin aminci, large de plus de 330 km et dont la croûte n'excède jamais 13 kilomètres d'épaisseur. La formation de ce bassin ne peut résulter de mouvements horizontaux, ce qui exclut un amincissement par étirement (pure stretching) ou par l'existence d'une faille de détachement (simple shear) ou par quelque modèle conservatif que ce soit. Cette constatation corrobore l'observation de la présence d'horizons anté-salifère parallèles, entre eux et au sel, couche salifère que l'on retrouve sur la plate-forme : la création de ce bassin anté-salifère ne peut être que liée à un mouvement vertical. Le schéma d'évolution que nous proposons à partir des données structurales et des contraintes cinématiques présente quatre étapes : le premier stade correspond à une phase de déformation distensive limitée aux quelques rares blocs basculés observés en haut de pente continentale. C'est durant la deuxième étape que se déroule la phase d'amincissement principal, les mouvements verticaux prévalent, aboutissant à la formation de la pente continentale et à la subsidence du bassin. La troisième phase correspond à une première striction des contraintes : la déformation se concentre sur une partie réduite du bassin, coïncidant avec le front salifère compressif. Une proto-croûte océanique se forme, probablement composée de croûte continentale amincie et intrudée de matériel mantellique. La seconde striction correspond à la phase finale de formation de la marge et aboutit à l'océanisation sensu stricto. L'étude cinématique et la description de l'évolution de la marge à partir des données sismiques montre donc que l'on ne peut envisager l'application d'un modèle de genèse des marges avec conservation de volume (type McKenzie ou Wernicke et leurs avatars) : pour expliquer l'amincissement du bassin, il faudrait probablement nous intéresser aux modèles non-conservatifs (impliquant transformation, convection à petite échelle, ...) qui sont déjà invoqués pour la formation des bassins marginaux ou continentaux, sans mouvements horizontaux.

Droits : info:eu-repo/semantics/openAccess
http://archimer.ifremer.fr/doc/2003/these-82.pdf
http://archimer.ifremer.fr/doc/00000/82/

Éditeur(s) : HAL CCSD Oxford University Press (OUP)
Résumé : International audience
We analyse P-wave receiver functions across the western Gulf of Aden and southern Red Sea continental margins in Western Yemen to constrain crustal thickness, internal crustal structure and the bulk seismic velocity characteristics in order to address the role of magmatism, faulting and mechanical crustal thinning during continental breakup. We analyse teleseismic data from 21 stations forming the temporary Young Conjugate Margins Laboratory (YOCMAL) network together with GFZ and Yemeni permanent stations. Analysis of computed receiver functions shows that (1) the thickness of unextended crust on the Yemen plateau is ∼35km; (2) this thins to ∼22km in coastal areas and reaches less than 14km on the Red Sea coast, where presence of a high-velocity lower crust is evident. The average Vp/Vs ratio for the western Yemen Plateau is 1.79, increasing to ∼1.92 near the Red Sea coast and decreasing to 1.68 for those stations located on or near the granitic rocks. Thinning of the crust, and by inference extension, occurs over a ∼130-km-wide transition zone from the Red Sea and Gulf of Aden coasts to the edges of the Yemen plateau. Thinning of continental crust is particularly localized in a <30-km-wide zone near the coastline, spatially co-incident with addition of magmatic underplate to the lower crust, above which on the surface we observe the presence of seaward dipping reflectors (SDRs) and thickened Oligo-Miocene syn-rift basaltic flows. Our results strongly suggest the presence of high-velocity mafic intrusions in the lower crust, which are likely either synrift magmatic intrusion into continental lower crust or alternatively depleted upper mantle underplated to the base of the crust during the eruption of the SDRs. Our results also point towards a regional breakup history in which the onset of rifting was synchronous along the western Gulf of Aden and southern Red Sea volcanic margins followed by a second phase of extension along the Red Sea margin.
ISSN: 0956-540X

hal-00825194
https://hal.archives-ouvertes.fr/hal-00825194
https://hal.archives-ouvertes.fr/hal-00825194/document
https://hal.archives-ouvertes.fr/hal-00825194/file/RF_Hakim2012_GJI.pdf
DOI : 10.1093/gji/ggt072

Éditeur(s) : Elsevier
Résumé : High P-wave velocities (7.1-7.8 km/s) lower crustal bodies (LCBs) imaged along volcanic margins are commonly interpreted as plume and break-up-related thick mafic underplating. This interpretation is partly challenged in this paper based on new seismic observations and modelling of the outer Voring Basin (Norway). An exceptional strong amplitude reflection, the T Reflection, is particularly well defined below the North Gjallar Ridge (NGR) between 7 and 8 s TWT. The T Reflection is located near the volcanic lava flows emplaced during the NE Atlantic breakup (similar to 55-54 Ma ago) and coincides with the top of the LCB, forming a mid-crustal dome. Based on structural and temporal relationships, we show that the dome clearly influences the structural development of the NGR and predates the continental breakup at least by 10-15 Ma. Using a thermo-kinematical model, we tried also to investigate and quantify the relationships between the extension, LCB and the magmatic production. Modelling suggests that significant Paleocene-Early Eocene magmatism can be produced without any temperature anomaly in the mantle if differential stretching occurs during the break-up initiation. The conclusion of 2D thermo-kinematical parametric analysis is that the magmatic model predicts, either little extension (beta < 2) with no melting or high extension (beta > 5) with significant melting along the outer Voring Basin. We suggest that the continental part of the LCB could not necessarily be breakup-related and so magmatic, as has often been stated previously. It is concluded here that the continental part of the LCB observed beneath the outer Voring Basin may be partly (or fully) attributed to inherited, high-pressure granulite/eclogite lower crustal rocks. The real amount of mafic material emplaced along the outer Voring Basin could be 20-40% less than thought.
Tectonophysics (0040-1951) (Elsevier), 2006 , Vol. 412 , N. 3-4 , P. 255-278

Droits : 2005 Elsevier B.V. All rights reserved
http://archimer.ifremer.fr/doc/2006/publication-1042.pdf
DOI:10.1016/j.tecto.2005.10.038
http://archimer.ifremer.fr/doc/00000/1042/

Résumé : Herbácea suculenta, perenne, glabra de hasta 1.5 m. Hojas a menudo pinnado-compuestas, de 10 a 30 cm; folíolos oblongos, ovales o elípticos, obtusos, crenados; márgenes con yemas. Panículas de 10 a 40 cm; cáliz urceolado, oblongo-acampanado, de 3 a 3.5 cm; corola rojiza de hasta 7 cm.
Herbacée succulente, pérenne, glabre, pouvant atteindre 1,5 m. Feuilles souvent pennées-composées, de 10 à 30 cm; folioles oblongues, ovales ou elliptiques, obtuses, crénées; bords avec bourgeons. Panicules de 10 à 40 cm; calice urcéolé, oblong en forme de cloche, de 3 à 3,5 cm; corolle rougeâtre pouvant atteindre 7 cm.
Perennial, fleshy, glabrous, herb up to 1.5 m high.  Leaves opposite, lower simple the upper pinnate, blades 18 cm x 12 cm, leaflets elliptic, margins crenate producing at times small plantlets in the small notches; inflorescence a panicle 10-40 cm; flowers pendulous, calyx inflated light green turning yellow 2.5-3.5 cm, corolla dull brownish-red 2.5-4.5cm long; fruit a follicle 10-15 mm long.
Originaria de Madagascar, cultivada y naturalizada en el trópico americano.
Originaire de Madagascar, cultivée et naturalisée dans les zones tropicales du continent américain.
Native to Madagascar, cultivated and naturalized in tropical America.

http://www.tramil.net/fototeca/plant204

Éditeur(s) : Wiley / Blackwell
Résumé : P>New seismic reflection data from the Grand Banks of Newfoundland and the Newfoundland Basin add to the growing knowledge of the composition, structure and history of this non-volcanic margin. Geophysical imaging is now approaching the extent of that done previously on the conjugate margin along Iberia, providing a valuable database for the development of rifting models. Two parallel profiles over the shelf platform image deep crustal fabric representing Precambrian or possibly Appalachian deformation as well as Mesozoic extension. Progressively more intense extension of continental crust is imaged oceanwards without the highly reflective detachments frequently seen on profiles off Galicia. A landward-dipping event 'L' is imaged sporadically and appears to be analogous to a similar event on the Iberian IAM9 profile. The transition zone is probably exposed serpentinized mantle as interpreted off the Iberian margin although there appears to be a difference in the character of ridge development and reflectivity. The distinctive 'U' reflection identified previously at the base of the Newfoundland Basin deep water sedimentary section and recently identified as one or more thin basalt sills is imaged on newly presented profiles that connect previously published profiles SCR3 and SCR2 showing that 'U' is highly regular and continuous except where interrupted by basement highs. 'U' is also seen to have a major impact on the ability to image underlying basement. A full transect beginning over completely unextended continental crust through to oceanic crust has provided a data set from which estimates of extension and the pre-rifting location of the present continental edge can be made. Two estimates were obtained; 85 km based on faulting and 120 km based on crustal thickness.
Geophysical Journal International (0956-540X) (Wiley / Blackwell), 2009-08 , Vol. 178 , N. 2 , P. 1004-1020

Droits : 2009 Wiley / Blackwell
http://archimer.ifremer.fr/doc/2009/publication-6919.pdf
DOI:10.1111/j.1365-246X.2009.04162.x
http://archimer.ifremer.fr/doc/00000/6919/

Éditeur(s) : HAL CCSD Wiley
Résumé : SUBSURF
International audience
Similarity of form between subaerial and submarine landscapes affected by erosion could suggest similarities in the process of erosion, such as by runoff and sedimentary flows, respectively. On the other hand, if aspects of form vary, its characteristics may be used to identify the environmental origin of erosion. Towards these goals, this contribution addresses the morphology of submarine volcanoes (seamounts) with widely differing histories of erosion. One set from the Pacific Ocean never exposed above sea level includes Cretaceous-age seamounts near Hawai'i (including Apu'upu'u Seamount), two seamounts of < 3 Ma in age near a mid-ocean ridge and the 11-4 Ma Jasper Seamount. These seamounts are all isolated from continents and hence from any erosion associated with mass wasting of unstable terrigenous deposits. In such isolated submarine environments, surfaces erode slowly from in situ weathering, mass wasting and scouring by sedimentary flows initiated by slope failure in pelagic or bedrock materials. The Pacific seamounts are compared with Valencia Seamount in the western Mediterranean, exposed subaerially for 100-400 k.y. during the Messinian Salinity Crisis before 5 Ma. Multibeam and deeply towed sidescan sonar data of Valencia Seamount reveal features typical of subaerial erosion of volcanic islands, such as canyons and relatively uneroded sectors (planezes) between them. Using a simple topographical reconstruction, the apparent erosion depth typically reaches 100 m within canyons and up to 180 m in places. Whereas the younger Pacific seamounts do not show these erosional features, the much older Cretaceous seamounts do have channels, which in one example suggests up to 200 m of incision. Both Valencia and Apu'upu'u seamounts have channel longitudinal profiles that are steep and typically linear to concave upwards. The erosion depth of Apu'upu'u Seamount is significant, despite the seamount's persistent submarine environment, because of its greater age, steeper flanks and greater contributing areas to channels compared with Valencia Seamount. These results illustrate that the channel morphology resulting from submarine erosion can become similar to that produced by subaerial erosion given sufficient time.
ISSN: 0950-091X

hal-00411425
https://hal.archives-ouvertes.fr/hal-00411425
DOI : 10.1111/j.1365-2117.2008.00355.x

Éditeur(s) : Amer Geophysical Union
Résumé : The origin of the Algerian margin remains one of the key questions still discussed in the Western Mediterranean sea, due to the imprecise nature and kinematics of the associated basin during the Neogene. For the first time, the deep structure of the Maghrebian margin was explored during the SPIRAL seismic survey. In this work, we present a N-S transect off Tipaza (west of Algiers), a place where the margin broadens due to a topographic high (Khayr-al-Din Bank). New deep penetration seismic profiles allow us to image the sedimentary sequence in the Algerian basin and the crustal structure at the continent-ocean boundary. Modeling of the wide-angle data shows thinning of the basement, from more than 15km in the continental upper margin to only 5–6km of oceanic-type basement in the Algerian basin, and reveals a very narrow or absent transitional zone. Analysis of the deep structure of the margin indicates features inherited from its complex evolution: (1) an oceanic-type crust in the deep basin, (2) similarities with margins formed in a transform-type setting, (3) a progressive deepening of the whole sedimentary cover, and the thickening of the Plio-Quaternary sediments at the margin foot, coeval with (4) a downward flexure of the basement in the basin. These features argue for a multiphased evolution of the margin, including (1) an early stage of rifting and/or spreading, (2) a late transcurrent episode related to the westward migration of the Alboran domain, and (3) a diffuse Plio-Quaternary compressional reactivation of the margin.
Journal Of Geophysical Research-solid Earth (0148-0027) (Amer Geophysical Union), 2013-08 , Vol. 118 , N. 8 , P. 3899-3916

Droits : 2013. American Geophysical Union. All Rights Reserved.
http://archimer.ifremer.fr/doc/00152/26333/24412.pdf
DOI:10.1002/jgrb.50318
http://archimer.ifremer.fr/doc/00152/26333/

Éditeur(s) : HAL CCSD
Résumé : The Deep Basin of the Gulf of Mexico (DBGM) extends over eastern Mexico, the southeastern part of the United States, west of the Atlantic Ocean. This study, based on the interpretation and integration of seismic profiles, exploration wells and outcrop studies, focus on the deep part of the Gulf of Mexico, where bathymetry varies from 200 to 3750 m, thus comprising both the continental slope and the abyssal plain. The first part of this thesis focus on the description of the sedimentary infill of the western part of the Gulf of Mexico, in the Veracruz State, and to its geodynamic controls. The geodynamic evolution of the Deep Basin of the Gulf of Mexico (DBGM) begins during the Triassic-Jurassic with the break-up and the opening of a continental rift, in the southern part of the North American lithospheric plate. This opening induced a relative movement of the Yucatan Block towards the southeast. This intra-continental rifting episode was followed by a stage of post-rift thermal subsidence in the basins of the continental margin in the west, coeval with oceanic accretion in the DBGM. The thermal subsidence of the margin was subsequently modified by the Laramian orogeny, which impacted strongly the overall architecture of the margin as well as its litho-stratigraphic evolution, inducing the deposition of siliciclastic deposits in various morphotectonic provinces: i.e., near the tectonic front of the Sierra Madre Oriental (SMO), within the adjacent Chicontepec foreland basin, over the Tuxpan Platform (Golden Lane), across the continental slope and up to the deep abyssal plain, these two last morphotectonic provinces belonging to the DBGM. During the Early Paleogene, the effects of the thermal subsidence of the passive margin were stressed by the tectonic load of the Laramian orogen (i.e., the Sierra Madre Oriental, SMO), thus allowing the development of a foreland basin flexural. In this geodynamic framework, the main sedimentary transfers developed from the tectonic front "SMO" in the west, towards the DBGM in the east, the main source for clastic sediments being linked to the erosion of the "SMO" mountains. During the Paleocene and the Early Eocene, the architecture of the silici-clastic syn-tectonic sediments deposited in submarine fans was characterized by sliding, turbidites with A and B Bouma facies, as well as levees and channels. After the stop of the flexural subsidence, the thermal subsidence of the passive margin resumed during the Late Eocene, the Oligocene and the Neogene, allowing the development of a new sedimentary prism, prograding eastwards toward the DBGM. This sedimentary infill was again made up of levees-channels, sand bars and delta systems. During the Neogene, an extensional system with listric faults and roll-over features developed across the slope of the DBGM, due to an active detachment developing within overpressured Eocene-Oligocene clays. This gravitational gliding of Neogene series accounted also for the development of compressional features at the toe of the slope. Approximately 60% of the Miocene siliciclastic sediments have been trapped in growth strata and slope basins associated with this complex gravitational system, ranging from river-delta features towards gravity slides associated with slump facies. The second part of this thesis aims at a quantification of these various processes, including the construction of balanced cross sections, forward Thrustpack kinematic modelling coupling the development of a basal detachment, lithospheric flexure, erosion and sedimentation, as well as subsequent stratigraphic modelling with the Dionisos software, the later aiming at predicting the sand versus clay ratios in Neogene siliciclastic deposits of the DBGM and its surroundings.
Le bassin profond du Golfe du Mexique (BPMG) est localisé à l'est du Mexique, au sud-est des États-Unis et à l'ouest de l'Océan Atlantique. Cette étude de la partie profonde du Golfe du Mexique est basée sur l'intégration de données de sismique, de forages pétroliers et d'études de terrain; elle comprend toute la pente continentale et la plaine abyssale, avec une bathymétrie qui varie de 200 à 3750 m. La première partie de cette thèse est consacrée à la description du remplissage sédimentaire de la bordure occidentale du Golfe du Mexique, dans le secteur de Veracruz, en liaison avec son évolution géodynamique. L'évolution géodynamique du BPMG commence au Trias-Jurassique avec la rupture et la propagation d'un rift continental, dans le secteur sud de la plaque nord américaine. Cette ouverture et le déplacement relatif vers le sud-est du bloc crustal du Yucatan sont à l'origine du BPGM. Cette géodynamique de rift continental est suivie d'une étape post-rift accompagnée de l'océanisation du bassin. Les bassins de la marge passive ont poursuivi leur évolution sous l'effet de la subsidence thermique à l'ouest du Golfe du Mexique, tandis que de la croûte océanique se formait dans le BPGM. Cette subsidence thermique de la marge a ensuite été perturbée par l'orogénèse Laramienne, qui a remodelé l'architecture stratigraphique silico-clastique des dépôts du Tertiaire entre les éléments morphotectoniques suivants: lefront tectonique de la Sierra Madre Orientale (SMO), le bassin d'avant-pays Chicontepec, la Plateforme de Tuxpan-Faja de Oro, la pente continentale et la plaine abyssale, ces deux dernières provinces morphotectoniques appartenant au BPGM. Pendant le Paléogèneinférieur, les effets de la subsidence thermique de la marge passive ont été accentués par la charge tectonique de l'orogénèse laramienne (SMO), permettant ainsi le développement d'un bassin flexural d'avant-pays. Au cours de cette étape, les principaux transferts sédimentaires se sont effectués du front tectonique "SMO" vers le BPGM. La source principale de sédiments clastiques est liée à l'érosion de la chaîne de montagnes "SMO". Pendant le Paléocène et l'Éocène inférieur, l'architecture des premiers sédiments silico-clastiques syn-tectoniques déposés dans des éventails sous-marins sont caractérisés par des figures de glissement, des faciès turbiditiques A et B de Bouma, des chenaux-levées. Après l'arrêt de la subsidence flexurale, la subsidence thermique de la marge passive s'est poursuivie pendant l'Éocène supérieur, l'Oligocène et le Néogène, permettant le développement d'un nouveau prisme sédimentaire progradant. Les remplissages sédimentaires sont encore constitués de chenaux et de levées, avec des barres de sable associées à des systèmes deltaïques sur la plateforme. Pendant le Néogène, un système de failles listriques s'est développé sur la pente du BPGM, au-dessus d'une surface de décollement située, dans la région d'étude, dans les argiles de l'Éocène-Oligocène. Ce système de failles de croissance a piégé plus de 60% des sédiments silico-clastiques du Miocène. Ce remplissage sédimentaire évolue latéralement de faciès fluviaux deltaïques vers des faciès de pente affectés de glissements gravitaires et associés à des turbidites. La deuxième partie de cette thèse est consacrée à une approche quantitative basée sur des modélisations structurales (coupes équilibrées et modélisations cinématiques directes avec Thrustpack, couplant décollement gravitaire, flexure lithosphérique, érosion et sédimentation), puis sédimentaires (prise en compte des transferts de matériel clastique depuis la partie émergée de la chaîne jusqu'au bassin profond, à l'aide du logiciel Dionisos, afin de mieux comprendre les processus de piégeage des sédiments grossiers dans les structures de croissance et les bassins perchés de la marge.
https://tel.archives-ouvertes.fr/tel-00435120

tel-00435120
https://tel.archives-ouvertes.fr/tel-00435120
https://tel.archives-ouvertes.fr/tel-00435120/document
https://tel.archives-ouvertes.fr/tel-00435120/file/thesealzaga.pdf

Éditeur(s) : Université des Antilles Études caribéennes
Résumé : Afin de mettre en perspective les différents articles du dossier, le texte souligne les différentes étapes qui définissent la situation de la façade caraïbe à la fois au sein des Etats-nations et de la région centraméricaine. Depuis une position de marge ou d’enclave liée à la fois à la géographie et aux logiques de l’empire espagnol, cet ensemble territorial s’est construit à partir de fragments plus ou moins connectés entre eux et aux espaces régionaux maritimes (caribéen ou atlantique). Au cours de leur construction, les différents Etats-nations n’envisagent d’abord la façade caraïbe que dans sa dimension de connexion transisthmique. Pourtant, on constate au vingtième siècle différents processus d’intégration territoriale qui visent à relier espace continental et façade caraïbe, processus qu’il faut associer à de nouvelles dynamiques démographiques. Les sociétés d’interface qui en résultent, voient leurs composantes « ladinas », indiennes, ou afro-descendantes se réorganiser. Enfin, ces fragments qui composent la façade prennent de nouvelles couleurs à la lumière des projections faites par d’autres acteurs (ONG) ou à d’autres échelles (région américaine).
In order to put into perspective the different papers of the issue, this text highlights the successive stages by which the Caribbean coastline of Central American has been constructed, under the several States-nations and as a part of the Central American region. As a margin or enclave due to geographical characters as to the logics of Spanish Empire, these territories have been made from fragments more or less connected between them or to other regional maritime spaces (Caribbean or Atlantic). When growing, the States-nations in the region first exclusively consider their Caribbean coastline as a transisthmic connection. Yet, during the twentieth century, various process of territorial integration aim to connect continental spaces and maritime coastline, associating demographical dynamics. Societies of interface result of these process, where their ladina, indian, afro components are reorganized. Finally, theses fragments as elements of the façade take a new color in the look of new actors (NGO) or from other scales and spaces (Atlantic region, Caribbean Sea).
Para poner en perspectiva los diferentes artículos del numero temático, este texto subraya las varias etapas en que definieron la situación de la costa caribeña, a la vez en cada Estado-Nacion y al nivel de la región. Con una posición de margen o enclave, que se explica tan por motivos geográficos que por las lógicas del imperio español, este conjunto territorial se ha construido a partir de fragmentos más o menos conectados entre sí e con los espacios regionales marítimos (caribeño o atlántico). Cuando se desarrollaron, los Estados-naciones consideraban las costas caribeñas solo por su potencial transístmico. Sin embargo, en el siglo veinte, llevaron a cabo varios procesos de integración territorial que les permiten vincular su espacio continental con la fachada atlántica, y eso asociándose a importantes dinámicas poblacionales. Resultan de estos procesos sociedades de interfaz, cuyos componentes ladinos, indígenas y afros se ven reorganizados. Por fin, los fragmentos que componen la costa caribeña toman otro color a la luz de proyectos llevados por actores ajenos (ONG) o desde espacios y escalas diferentes (Espacio atlántico, región americana).
Amérique centrale
Caraïbes
Livingston
Guatemala

Droits : info:eu-repo/semantics/openAccess
urn:doi:10.4000/etudescaribeennes.6032
http://journals.openedition.org/etudescaribeennes/6032

Éditeur(s) : HAL CCSD Société géologique de France
Résumé : U-Pb ages obtained from detrital zircon from terrigenous sediments are used to determine the sources. Present fluvial sand-bars of the Ogooue river yield age spectra of detrital zircons in agreement with Archean and Early Proterozoic Sources found in the drainage. The large proportion of Late Proterozoic zircons cannot be derived from primary erosion of the watershed basement rocks, since there is no formation of that age in the area. This later group of zircons is in good agreement with reworking of the aeolian Paleogene Bateke Sands, by regressive erosion in the upper reaches of the Ogooue river, as they contain a majority of Late Proterozoic age zircons. The sources of Late Proterozoic zircons in the Bateke Sand are very distant, and transported and reworked - at least in part - by aeolian processes. Our results, together with the widely distributed Paleogene sediments over continental Africa, suggests that Paleogene was it time of subdued erosion of the cratonic areas and extensive reworking, transport and deposition within continental Africa. In contrast, our results from the Ogooue river indicate active present incision of the cratonic area, erosion of the previous continental sediments, and export of the river bed-load to the continental margin. This temporal evolution of erosion-transport-deposition is correlated with the drastic climate change that occurred during the Cenozoic, leading to a more efficient mechanical erosion, and it correlates with the increase of terrigenous flux to the margin, observed during the Neogene.
EISSN: 1777-5817

hal-00411165
https://hal.archives-ouvertes.fr/hal-00411165
DOI : 10.2113/gssgfbull.179.1.29

Éditeur(s) : Elsevier
Résumé : The French Guiana transform margin and Demerara abyssal plain have been recently surveyed in the framework of the EXTRAPLAC French Program of extension of the continental shelf (Guyaplac survey, Ifremer-IFP-SHOM-IPEV). Based on the interpretation of some of the data collected during the Guyaplac survey (Simrad-EM12 multibeam bathymetric data, backscatter imagery, and 3.5 kHz profiles), the area can be divided into three morphostructural domains. (1) The western Guiana margin, including a part of the Demerara plateau, an important bathymetric relief prolonging the continental platform off Guiana and Surinam. This domain is bounded by (1a) the NWSE trending northern border of the Demerara plateau which appears quite steep and corresponds to a transform segment of the margin, (1b) the N-S eastern border of the Demerara plateau which corresponds to a divergent segment of the margin. The Demerara plateau shows a segmented morphology, low slope gradients, and a very rough surface (ripples perpendicular to the slope direction). NNW-SSE structural steps seem to correspond to collapses of 100 km long blocs towards the east. Slumps initiate along these directions. The observed rough bathymetry seems to be related to creeping processes. At a greater scale (seismic data), this part of the margin has been totally destabilized (numerous imbricate transparent masses rooted at about 0.5 s.t.w.t.t. below seafloor). The NW-SE trending northern border of the Demerara plateau corresponds to a cliff-like continental slope, probably slightly smoother than other transform margins (Ghana/cote d'Ivoire margin). The N-S eastern border of Demerara plateau is characterized by numerous small-scale imbricate slumps. Some of these failures seem to be emplaced in the prolongation of the NNW-SSE structural steps identified on the Demerara plateau. (2) The eastern Guiana margin corresponds to a NW-SE oriented gullied transform margin segment. The associated continental slope is very steep and characterized by numerous imbricate slumps and related debris flows. Some undulated masses, probably corresponding to creeping sediments or to older mass-wasting events are still imprinted on bathymetry. This transform margin segment is nearly entirely destabilized and eroded. (3) The Demerara abyssal plain. This domain is characterized eastwards by channels belonging to the Amazon turbidite system and westwards, at the foot of Demerara continental slope, by sediment waves probably created by contour currents. To conclude, it seems that there is a strong relationship between the structure (transform and divergent segments) and the emplacement of recurrent slope instabilities. These are probably related to the steepness of the slopes but also to subsidence histories generating in some cases huge deep-seated collapses of the whole margin. Fluid ascents are common everywhere in the area, probably enhancing slope instability. Their origin is not constrained but the black shales or Cretaceous organic-rich layers could be good candidates.
Marine and Petroleum Geology (0264-8172) (Elsevier), 2009-05 , Vol. 26 , N. 5 , P. 711-723

Droits : 2008 Elsevier Ltd All rights reserved.
http://archimer.ifremer.fr/doc/2009/publication-6856.pdf
DOI:10.1016/j.marpetgeo.2008.02.010
http://archimer.ifremer.fr/doc/00000/6856/

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The Tyrrhenian Sea is usually interpreted to be a Neogene back-arc basin that opened by continental rifting and oceanic spreading caused by the eastward migration of the Apennine subduction system during Miocene and Pliocene times. Rifting of the southern Tyrrhenian Sea started first along the Eastern Sardinian margin during the middle to late Miocene times, including the Messinian. The "METYSS" project aims at better constraining the relationships between crustal tectonics, salt tectonics and sedimentation from Messinian times to present-day. The "METYSS 1" cruise (2009) allowed to acquire about 1200 km of HR seismic-reflection profiles along the Eastern Sardinian margin, Western Tyrrhenian Sea. This data set clearly illustrates that this area has been highly dissected during the rifting stage by N-S trending normal faults delineating ridges and basins, as previously described. The Messinian seismic markers (UU and MU) locally display fan-shaped stratal geometries, but the mechanism responsible for such geometries, salt tectonics or rifting, has yet to be carefully deciphered. We also mapped the spatial distribution of the mobile salt. The highly variable thickness of the small confined salt basins may be related to the initial pre-Messinian basin geometry, to the fact that salt deposition was syn-rift or to salt movement. Southeastward, salt tectonics is vigorous in unconfined basins and appears to have started early during the UU deposition. More surprisingly, our data demonstrate that some of the major faults have been significantly reactivated during the post-rift period, up to late Quaternary time, as shown by bathymetric scarps and associated debris flows. Moreover, some of this post-rift deformation can be evidenced within the Plio-Quaternary sequence by a regional unconformity. The post-Miocene deformation style varies greatly between different areas of the margin, and can also be strongly influenced by the presence or absence of mobile Messinian salt.
ISSN: 0040-1951

hal-00996665
https://hal.archives-ouvertes.fr/hal-00996665
DOI : 10.1016/j.tecto.2013.12.015

Éditeur(s) : Elsevier
Résumé : A study of organic carbon mineralization from the Congo continental shelf to the abyssal plain through the Congo submarine channel and Angola Margin was undertaken using in situ measurements of sediment oxygen demand as a tracer of benthic carbon recycling. Two measurement techniques were coupled on a single autonomous platform: in situ benthic chambers and microelectrodes, which provided total and diffusive oxygen uptake as well as oxygen microdistributions in porewaters. In addition, sediment trap fluxes, sediment composition (Org-C, Tot-N, CaCO3, porosity) and radionuclide profiles provided measurements of, respectively input fluxes and burial rate of organic and inorganic compounds. The in situ results show that the oxygen consumption on this margin close to the Congo River is high with values of total oxygen uptake (TOU) of 4 +/- 0.6, 3.6 +/- 0.5 mmol m(-2) d(-1) at 1300 and 3100m depth, respectively, and between 1.9 +/- 0.3 and 2.4 +/- 0.2 mmol m(-2) d(-1) at 4000 m depth. Diffusive oxygen uptakes (DOU) were 2.8 +/- 1.1, 2.3 +/- 0.8, 0.8 +/- 0.3 and 1.2 +/- 0.1 mmol m(-2) d(-1), respectively at the same depths. The magnitude of the oxygen demands on the slope is correlated with water depth but is not correlated with the proximity of the submarine channel-levee system, which indicates that cross-slope transport processes are active over the entire margin. Comparison of the vertical flux of organic carbon with its mineralization and burial reveal that this lateral input is very important since the sum of recycling and burial in the sediments is 5-8 times larger than the vertical flux recorded in traps. Transfer of material from the Congo River occurs through turbidity currents channelled in the Congo valley, which are subsequently deposited in the Lobe zone in the Congo fan below 4800 m. Ship board measurements of oxygen profiles indicate large mineralization rates of organic carbon in this zone, which agrees with the high organic carbon content (3%) and the large sedimentation rate (19 mm y(-1)) found on this site. The Lobe region could receive as high as 19 mol C m(-2) y(-1), 1/3 being mineralized and 2/3 being buried and could constitute the largest depocenter of organic carbon in the South Atlantic.
Deep Sea Research Part II: Topical Studies in Oceanography (0967-0645) (Elsevier), 2009-11 , Vol. 56 , N. 23 , P. 2223-2238

Droits : 2009 Elsevier B.V. All rights reserved.
http://archimer.ifremer.fr/doc/2009/publication-7316.pdf
DOI:10.1016/j.dsr2.2009.04.005
http://archimer.ifremer.fr/doc/00000/7316/

Éditeur(s) : Elsevier
Résumé : During the Fanindien 2006 cruise of R/V 'Beautemps-Beaupre', high resolution multibeam bathymetry, sub-bottom profiling and sediment coring was carried out along the East African margin, offshore Tanzania and Mozambique (Indian Ocean). The newly acquired data reveal the presence of a giant deep-sea valley (the Tanzania channel) that is more than 10 km wide at 4000 m water depth, along the continental rise. The valley remains similar to 70 m deep and 7 km wide at 800 km from the Tanzania coast. Morphological comparison with worldwide submarine channels show that the Tanzania channel is one of the largest known submarine valleys. This discovery brings new light on development of submarine valleys that drain sediments originated from the East African Rift System (EARS) highlands (i.e. the Tanzania channel and its neighbor Zambezi channel located similar to 1000 km southward). Both of the systems have a morphology markedly different to the classical sinuous, V-shaped channels located at similar latitudes (e.g. the Zaire or Amazon channels). Their submarine drainage system consists of a downslope converging tributary canyons joining a central trunk channel in the continental rise. The presence of such giant deep-sea drainage systems is probably linked to a strong structural control on the sediment pathway, associated to a massive sediment transfer towards the Indian Ocean in relation with the tectonic activity of the East African Rift System (i.e. the uplift periods trough mid-Miocene and Plio-Pleistocene times) and its interplay with the East African equatorial climate changes.
Marine Geology (0025-3227) (Elsevier), 2008-12 , Vol. 255 , N. 3-4 , P. 179-185

Droits : 2008 Elsevier B.V. All rights reserved.
http://archimer.ifremer.fr/doc/00324/43491/42958.pdf
DOI:10.1016/j.margeo.2008.09.002
http://archimer.ifremer.fr/doc/00324/43491/

Éditeur(s) : Elsevier Science Bv
Résumé : Mechanisms controlling the transfer and retention of silicon (Si) along continental margins are poorly understood, but play a major role in the functioning of coastal ecosystems and the oceanic biological pump of carbon. Deep-sea fans are well recognized as carbon sink spots, but we lack knowledge about the importance of the fans in the global Si cycle. Here, we provide a first estimate of the role played by the Congo deep-sea fan, one of the biggest in the world, in the Si cycle. Sediment cores sampled in the deep-sea fan were analyzed to build a Si mass balance. An exceptionally high accumulation rate of amorphous silica aSiO(2) (2.29 +/- 0.58 mol Si m(-2) y(-1)) was found, due to a high sedimentation rate and the presence of aluminum in the sediments. Although favored by bioirrigation, recycling fluxes remained low (0.3 mol Si m(-2) y(-1)) and reconstructed input fluxes could only be explained by lateral inputs coming from the canyon. Preliminary calculations show that the rapid transport of aSiO(2) through the canyon and the excellent preservation efficiency in the sediments imply that 50% of aSiO(2) river inputs from the Congo River accumulate annually in the deep-sea fan. Si:C ratios in deep-sea fan sediments were very low (0.2) and only three times as high as those measured in the river itself, which suggests that material from the river and the continental shelf was delivered directly through the canyon, with very little time for Si and C cycle decoupling to take place.
Journal Of Marine Systems (0924-7963) (Elsevier Science Bv), 2015-01 , Vol. 141 , P. 71-79

Droits : 2014 Elsevier B.V. All rights reserved.
http://archimer.ifremer.fr/doc/00251/36242/35797.pdf
DOI:10.1016/j.jmarsys.2014.07.010
http://archimer.ifremer.fr/doc/00251/36242/

Éditeur(s) : HAL CCSD Elsevier
Résumé : We have integrated the relatively unknown distal domains of the Lower Congo basin, where the main depocenters of the Congo submarine fan are located, with the better-constrained successions on the shelf and upper slope, through the analysis of thousands of km of 2D seismic reflection profiles off-shore the Congo-Angola passive margin. The basin architecture is depicted by two ca. 800-km-long regional cross sections through the northern (Congo) and southern (Angola) margin. A large unit deposited basinward of the Aptian salt limit is likely to be the abyssal-plain equivalent of the upper-Cretaceous carbonate shelf that characterized the first post-rift deposits in West-equatorial African margins. A latest-Turonian shelf-deepening event is recorded in the abyssal plain as a long period (Coniacian-Eocene) of condensed sedimentation and basin starvation. The onset of the giant Tertiary Congo deep-sea fan in early Oligocene following this event reactivates the abyssal plain as the main depocenter of the basin. The time-space partitioning of sedimentation within the deep-sea fan results from the interplay among increasing sediment supply, margin uplift, rise of the Angola salt ridge, and canyon incision throughout the Neogene. Oligocene-early Miocene turbidite sedimentation occurs mainly in NW-SE grabens and ponded inter-diapir basins on the southern margin (Angola). Seaward tilting of the margin and downslope salt withdrawal activates the up-building of the Angola escarpment, which leads to a northward (Congo) shift of the transfer zones during late Miocene. Around the Miocene-Pliocene boundary, the incision of the Congo submarine canyon confines the turbidite flows and drives a general basinward progradation of the submarine fan into the abyssal plain The slope deposition is dominated by fine-grained hemipelagic deposits ever since. Results from this work contribute to better understand the signature in the ultra-deep deposits of processes acting on the continental margin as well as the basin-wide sediment redistribution in areas of high river input.
ISSN: 0040-1951

hal-00424533
https://hal.archives-ouvertes.fr/hal-00424533
DOI : 10.1016/j.tecto.2008.04.009

Éditeur(s) : HAL CCSD Geological Society of America
Résumé : International audience
On the New Jersey shelf (offshore North America), the presence of pore water fresher than seawater is known from a series of boreholes completed during the 1970s and 1980s. To account for this fresh water, a fi rst hypothesis involves possible present-day active dynamic connections with onshore aquifers, while a second involves meteoritic and/or sub- ice-sheet waters during periods of lowered sea level. Expedition 313 drilled three boreholes on the middle shelf, offering a unique opportunity for the internal structure of the siliciclastic system to be accessed, at scales ranging from the depositional matrix to the continental margin. This enables the stratigraphic architecture to be correlated with the spatial distribution and salinity of saturating fl uids. Expedition 313 revealed both very low salinities (<3 g/L) at depths exceeding 400 m below the seafl oor and evidence for a multilayered reservoir organization, with freshand/ or brackish-water intervals alternating vertically with salty intervals. In this study we present a revised distribution of the salinity beneath the middle shelf. Our observations suggest that the processes controlling salinity are strongly infl uenced by lithology, porosity, and permeability. Saltier pore waters generally occur in coarse-grained intervals and fresher pore waters occur in fi ne-grained intervals. The transition from fresher to saltier intervals is often marked by cemented horizons that probably act as permeability barriers. In the lowermost parts of two holes, the salinity varies independently of lithology, suggesting different mechanisms and/or sources of salinity. We present an interpretation of the sedimentary facies distribution, derived from core, logs, and seismic profi le analyses, that is used to discuss the marginscale two-dimensional reservoir geometry and permeability distribution. These proposed geometries are of primary importance when considering the possible pathways and emplacement mechanisms for the fresh and salty water below the New Jersey shelf.
EISSN: 1553-040X

insu-00858241
https://hal-insu.archives-ouvertes.fr/insu-00858241
DOI : 10.1130/GES00855.1