Éditeur(s) : Université de Bretagne Occidentale
Résumé : The objective of the present work is to study the formation of the passive continental margins of the Central Segment of the South Atlantic, most particularly the Congo and Angola margins. We propose a combined approach, which integrates structural constraints based on geological cross-sections (based on seismic data) and global constraints based on plate kinematic reconstructions. The structural study is based on : i) MCS and refraction data collected during the ZaiAngo programme (a joint project conducted by Ifremer and Total) ; ii) proprietary, industrial seismic data (courtesy of Total) from the Angola margin and iii) on all available seismic lines from the Africa and Brazil conjugated margins, between Walvis Ridge and the Equatorial Fracture Zones. Based on theses data, three structural domains (continental, transitional and oceanic) have been defined, the major characteristics of which are : Crustal thinning occurs abruptly, mostly below the continental slope, over a lateral distance of less than 50 km. The top of the crust deepens as the Moho shallows. Only a few extensional structures are observed ; tilted blocks are very few (one or two, depending on the profile), found only on the upper part of the slope and sealed by a discordance prior to salt deposition. The transitional domain is characterized by the existence of a pre-salt basin lying over a thin crustal layer. No tilted blocks are observed in this domain and reflectors within the pre-salt sediment series are parallel to the base of the Aptian salt, over distances greater than 100 km, precluding the possibility of any significant deformation that would imply large horizontal motions. Two types of crust are observed in the transitional domain. "Type I" crust is found below the undeformed pre-salt sediment series located below the eastern part of the basin ; it is characterized by an upper layer of thickness greater than 5 km and a abnormal velocity layer (7.2 - 7.6 km/s), up to 6 km thick. "Type II" crust is less than 5 km thick and found below the salt compressive front that affects the western part of the basin. The salt cover is continuous (no erosion surface is observed), from the continental shelf to the western termination of the basin. Salt was not deposited in a confined environment (like in the Mediterranean), but in a shallow water, lagunal environment. This imposes the zero-level and constrains the paleo-bathymetry at the time of salt deposition, which dates the latest stage of margin formation. Understanding the formation of a margin cannot be approached without studying the homolog margin. Therefore, it is of major importance to reconstruct the closure of the ocean bordered by these homolog margins and take into account the constraints imposed by the kinematic reconstructions on the lateral motions of the lithospheric plates. In order to assess the relative position of the plates at the ocean closure (prior to crustal thinning), a global study was thus performed, integrating all geophysical and geological constraints, in the ocean and on land. The role of african intra-plate deformation and its limits and their consequences have been thoroughly studied. To juxtapose the margins of the central segment of the Southern Atlantic, it is all the margins bordering the Equatorial Atlantic that need to be adjuste precisely. The kinematic study of this last region shows that the reconstruction obtained are reliable, unambiguous with a quantifiable precision The best fitting poles (obtained using the PLACA software), show that it is impossible to close the margins beyond the superposition of the salt fronts, from the Angola and Brazil margins. The geological cross-sections based on seismic data from the homolog margins indicate that a 330 km wide basin with thin (< 12 km) crust was present at the time of the fit. This basin cannot result from horizontal movement related to pure stretching or simple shear, or any model implying conservative volume. This conclusion is consistent with the existence of presalt reflectors parallel to the salt layer wich extends to the platform: the formation of the pre-salt basin must be related to vertical motions. The scenario that we propose for the evolution of the Congo-Angola margin consist in four stages: the first phase corresponds to extensional deformation limited to the few tilted blocks observed on the upper part of the slope. During the second phase, the main crustal thinning occurs, vertical motions prevailes, resulting in the formation of the continental slope and in the subsidence of the basin. The third phase corresponds to the first stress striction: deformation is concentrated in a limited section of the basin, which corresponds to the salt compression front. A proto-oceanic crust is formed, probably composed of thinned continental crust intruded by mantle material. The second stress striction corresponds to the finale phase, resulting in oceanisation senso stricto. The evolution described shows that we can not apply conservative models for margin formation (such as McKenzie and Wernicke or any of their avatars). In order to explain this thinning, one should investigate non-conservative models (implying geochemical transformation, small scale convection, intrusion...) such as those proposed in marginal or continental basins with no horizontal movments.
Ce travail de thèse aborde la formation des marges continentales passives dans le segment central de l'océan Atlantique Sud (plus particulièrement au Congo et en Angola), en intégrant une étude en coupe (étude structurale à partir des coupes sismiques) et une étude en plan (étude cinématique). L'étude structurale de la marge a été réalisée à partir des données de sismique réflexion et réfraction de la campagne Zaïango et d'une compilation de données sismiques réflexion existantes sur toutes les marges africaine et brésilienne entre les zones de fracture équatoriales et la ride de Walvis. L'interprétation de ces données a permis d'individualiser la structure de la marge en trois domaines : continental, transitionnel et océanique et de déterminer quelques points majeurs sur la structuration de la marge. L'amincissement est abrupt, localisé dans la zone de pente continentale et restreint à 50 km. La marge montre peu de structures distensives : seuls un ou deux blocs basculés sont observés en haut de pente continentale. Le domaine transitionnel est caractérisé par la géométrie particulière de la sédimentation anté-salifère, l'absence de blocs basculés et la faible épaisseur de croûte. La couche sédimentaire anté-salifère montre des réflecteurs plans jusqu'à la base du sel, continus sur 100 km, éliminant toutes possibilités de déformation du socle pendant et après son dépôt. La croûte du domaine transitionnel peut-être divisée en deux types : une croûte de type I sur laquelle se déposent les sédiments non déformés, et une croûte de type II sur laquelle se superposent les limites du « front compressif salifère » bien exprimé dans les séries postsalifères. Enfin le sel, que l'on observe depuis la plate-forme jusqu'au bassin profond, ne se dépose pas dans un bassin confiné (comme en Méditerranée) mais à un niveau proche de 0 m (ressemblant probablement à un dépôt de type lagunaire) et donne la paléo-bathymétrie au moment de son dépôt qui marque la fin de la période de formation de la marge. La compréhension de la genèse d'une marge ne peut être approchée sans son homologue. Cette simple constatation, cette évidence, montre toute l'importance que l'on doit apporter à la reconstruction cinématique initiale de l'océan qui borde ces marges homologues et aux contraintes imposées par les reconstructions cinématiques sur les mouvements horizontaux des plaques lithosphériques. Afin d'étudier la position des marges au moment de cette fermeture, c'est-à-dire avant amincissement, une étude globale intégrant l'ensemble des données disponibles, géophysiques et géologiques, océaniques et continentales, a été réalisée. Le rôle de la déformation intraplaque africaine, ses limites et leurs conséquences a, en particulier, été l'objet d'une attention poussée. Pour juxtaposer les marges du segment central, ce sont toutes les marges de l'océan Atlantique Equatorial qui doivent être ajustées précisément. L'étude cinématique réalisée de la région équatoriale montre que l'on obtient une reconstruction fiable et sans ambiguïté, avec une précision que l'on peut quantifier. Les pôles issus de cette étude (et calculés avec le Logiciel PLACA) indiquent qu'il est impossible d'obtenir une fermeture plus serrée que celle qui conduit à la superposition des fronts salifères brésilien et angolais : les coupes issues de la sismique réflexion des deux marges indiquent qu'il subsiste un bassin aminci, large de plus de 330 km et dont la croûte n'excède jamais 13 kilomètres d'épaisseur. La formation de ce bassin ne peut résulter de mouvements horizontaux, ce qui exclut un amincissement par étirement (pure stretching) ou par l'existence d'une faille de détachement (simple shear) ou par quelque modèle conservatif que ce soit. Cette constatation corrobore l'observation de la présence d'horizons anté-salifère parallèles, entre eux et au sel, couche salifère que l'on retrouve sur la plate-forme : la création de ce bassin anté-salifère ne peut être que liée à un mouvement vertical. Le schéma d'évolution que nous proposons à partir des données structurales et des contraintes cinématiques présente quatre étapes : le premier stade correspond à une phase de déformation distensive limitée aux quelques rares blocs basculés observés en haut de pente continentale. C'est durant la deuxième étape que se déroule la phase d'amincissement principal, les mouvements verticaux prévalent, aboutissant à la formation de la pente continentale et à la subsidence du bassin. La troisième phase correspond à une première striction des contraintes : la déformation se concentre sur une partie réduite du bassin, coïncidant avec le front salifère compressif. Une proto-croûte océanique se forme, probablement composée de croûte continentale amincie et intrudée de matériel mantellique. La seconde striction correspond à la phase finale de formation de la marge et aboutit à l'océanisation sensu stricto. L'étude cinématique et la description de l'évolution de la marge à partir des données sismiques montre donc que l'on ne peut envisager l'application d'un modèle de genèse des marges avec conservation de volume (type McKenzie ou Wernicke et leurs avatars) : pour expliquer l'amincissement du bassin, il faudrait probablement nous intéresser aux modèles non-conservatifs (impliquant transformation, convection à petite échelle, ...) qui sont déjà invoqués pour la formation des bassins marginaux ou continentaux, sans mouvements horizontaux.

Droits : info:eu-repo/semantics/openAccess
http://archimer.ifremer.fr/doc/2003/these-82.pdf
http://archimer.ifremer.fr/doc/00000/82/

Éditeur(s) : HAL CCSD
Résumé : The Deep Basin of the Gulf of Mexico (DBGM) extends over eastern Mexico, the southeastern part of the United States, west of the Atlantic Ocean. This study, based on the interpretation and integration of seismic profiles, exploration wells and outcrop studies, focus on the deep part of the Gulf of Mexico, where bathymetry varies from 200 to 3750 m, thus comprising both the continental slope and the abyssal plain. The first part of this thesis focus on the description of the sedimentary infill of the western part of the Gulf of Mexico, in the Veracruz State, and to its geodynamic controls. The geodynamic evolution of the Deep Basin of the Gulf of Mexico (DBGM) begins during the Triassic-Jurassic with the break-up and the opening of a continental rift, in the southern part of the North American lithospheric plate. This opening induced a relative movement of the Yucatan Block towards the southeast. This intra-continental rifting episode was followed by a stage of post-rift thermal subsidence in the basins of the continental margin in the west, coeval with oceanic accretion in the DBGM. The thermal subsidence of the margin was subsequently modified by the Laramian orogeny, which impacted strongly the overall architecture of the margin as well as its litho-stratigraphic evolution, inducing the deposition of siliciclastic deposits in various morphotectonic provinces: i.e., near the tectonic front of the Sierra Madre Oriental (SMO), within the adjacent Chicontepec foreland basin, over the Tuxpan Platform (Golden Lane), across the continental slope and up to the deep abyssal plain, these two last morphotectonic provinces belonging to the DBGM. During the Early Paleogene, the effects of the thermal subsidence of the passive margin were stressed by the tectonic load of the Laramian orogen (i.e., the Sierra Madre Oriental, SMO), thus allowing the development of a foreland basin flexural. In this geodynamic framework, the main sedimentary transfers developed from the tectonic front "SMO" in the west, towards the DBGM in the east, the main source for clastic sediments being linked to the erosion of the "SMO" mountains. During the Paleocene and the Early Eocene, the architecture of the silici-clastic syn-tectonic sediments deposited in submarine fans was characterized by sliding, turbidites with A and B Bouma facies, as well as levees and channels. After the stop of the flexural subsidence, the thermal subsidence of the passive margin resumed during the Late Eocene, the Oligocene and the Neogene, allowing the development of a new sedimentary prism, prograding eastwards toward the DBGM. This sedimentary infill was again made up of levees-channels, sand bars and delta systems. During the Neogene, an extensional system with listric faults and roll-over features developed across the slope of the DBGM, due to an active detachment developing within overpressured Eocene-Oligocene clays. This gravitational gliding of Neogene series accounted also for the development of compressional features at the toe of the slope. Approximately 60% of the Miocene siliciclastic sediments have been trapped in growth strata and slope basins associated with this complex gravitational system, ranging from river-delta features towards gravity slides associated with slump facies. The second part of this thesis aims at a quantification of these various processes, including the construction of balanced cross sections, forward Thrustpack kinematic modelling coupling the development of a basal detachment, lithospheric flexure, erosion and sedimentation, as well as subsequent stratigraphic modelling with the Dionisos software, the later aiming at predicting the sand versus clay ratios in Neogene siliciclastic deposits of the DBGM and its surroundings.
Le bassin profond du Golfe du Mexique (BPMG) est localisé à l'est du Mexique, au sud-est des États-Unis et à l'ouest de l'Océan Atlantique. Cette étude de la partie profonde du Golfe du Mexique est basée sur l'intégration de données de sismique, de forages pétroliers et d'études de terrain; elle comprend toute la pente continentale et la plaine abyssale, avec une bathymétrie qui varie de 200 à 3750 m. La première partie de cette thèse est consacrée à la description du remplissage sédimentaire de la bordure occidentale du Golfe du Mexique, dans le secteur de Veracruz, en liaison avec son évolution géodynamique. L'évolution géodynamique du BPMG commence au Trias-Jurassique avec la rupture et la propagation d'un rift continental, dans le secteur sud de la plaque nord américaine. Cette ouverture et le déplacement relatif vers le sud-est du bloc crustal du Yucatan sont à l'origine du BPGM. Cette géodynamique de rift continental est suivie d'une étape post-rift accompagnée de l'océanisation du bassin. Les bassins de la marge passive ont poursuivi leur évolution sous l'effet de la subsidence thermique à l'ouest du Golfe du Mexique, tandis que de la croûte océanique se formait dans le BPGM. Cette subsidence thermique de la marge a ensuite été perturbée par l'orogénèse Laramienne, qui a remodelé l'architecture stratigraphique silico-clastique des dépôts du Tertiaire entre les éléments morphotectoniques suivants: lefront tectonique de la Sierra Madre Orientale (SMO), le bassin d'avant-pays Chicontepec, la Plateforme de Tuxpan-Faja de Oro, la pente continentale et la plaine abyssale, ces deux dernières provinces morphotectoniques appartenant au BPGM. Pendant le Paléogèneinférieur, les effets de la subsidence thermique de la marge passive ont été accentués par la charge tectonique de l'orogénèse laramienne (SMO), permettant ainsi le développement d'un bassin flexural d'avant-pays. Au cours de cette étape, les principaux transferts sédimentaires se sont effectués du front tectonique "SMO" vers le BPGM. La source principale de sédiments clastiques est liée à l'érosion de la chaîne de montagnes "SMO". Pendant le Paléocène et l'Éocène inférieur, l'architecture des premiers sédiments silico-clastiques syn-tectoniques déposés dans des éventails sous-marins sont caractérisés par des figures de glissement, des faciès turbiditiques A et B de Bouma, des chenaux-levées. Après l'arrêt de la subsidence flexurale, la subsidence thermique de la marge passive s'est poursuivie pendant l'Éocène supérieur, l'Oligocène et le Néogène, permettant le développement d'un nouveau prisme sédimentaire progradant. Les remplissages sédimentaires sont encore constitués de chenaux et de levées, avec des barres de sable associées à des systèmes deltaïques sur la plateforme. Pendant le Néogène, un système de failles listriques s'est développé sur la pente du BPGM, au-dessus d'une surface de décollement située, dans la région d'étude, dans les argiles de l'Éocène-Oligocène. Ce système de failles de croissance a piégé plus de 60% des sédiments silico-clastiques du Miocène. Ce remplissage sédimentaire évolue latéralement de faciès fluviaux deltaïques vers des faciès de pente affectés de glissements gravitaires et associés à des turbidites. La deuxième partie de cette thèse est consacrée à une approche quantitative basée sur des modélisations structurales (coupes équilibrées et modélisations cinématiques directes avec Thrustpack, couplant décollement gravitaire, flexure lithosphérique, érosion et sédimentation), puis sédimentaires (prise en compte des transferts de matériel clastique depuis la partie émergée de la chaîne jusqu'au bassin profond, à l'aide du logiciel Dionisos, afin de mieux comprendre les processus de piégeage des sédiments grossiers dans les structures de croissance et les bassins perchés de la marge.
https://tel.archives-ouvertes.fr/tel-00435120

tel-00435120
https://tel.archives-ouvertes.fr/tel-00435120
https://tel.archives-ouvertes.fr/tel-00435120/document
https://tel.archives-ouvertes.fr/tel-00435120/file/thesealzaga.pdf

Éditeur(s) : Gauthier-Villars
Résumé : Simple thermodynamics calculations are applied to processes of a rising plume within an environment of an upward directed gradient of viscosity in the uppermost mantle. Four stages of the development of passive margins are described. Following an initial regional uplift strong lateral movements are induced at asthenospheric levels, stretching the overlying lithosphere. In the second stage plume material also enters the low viscosity lower crust, replacing continental material and forming a new, higher crust-mantle boundary by gravitational differentiation. The inital phase lag between the laterally intruding plume material and the rest of the lithosphere disappears once the continent is rifted and sea floor spreading is established (= stage 3). Finally, at stage 4, quiet subsidence, controlled by contraction, sedimentation, and possible phase changes in the lower crust, is established. The sequence described is in accordance with many observations of geology and geophysics. Rising plumes and sinking slabs are considered equivalent expressions of the heat engine earth which determines global tectonics.
Oceanologica Acta, Special issue (0399-1784) (Gauthier-Villars), 1981

Droits : info:eu-repo/semantics/openAccess
http://archimer.ifremer.fr/doc/00245/35658/34167.pdf
http://archimer.ifremer.fr/doc/00245/35658/

Éditeur(s) : HAL CCSD
Résumé : Based on fieldwork and modern analytical technics, this work presents an overview of the Mid-Cretaceous hyper-extended rift system exposed in the northern part of the Pyrenean mountain range. Its inversion during the Pyrenean orogeny allows for precious observations of the deep-seated processes occurring at the foot of distal margins. Some peculiar aspects characterizing the pre-Alpine hyper-extended domain are examined throughout the 400km long suture that is fossilized in the North Pyrenean Zone (NPZ). The High Temperature/Low Pressure (HT/LP) thermal imprint of the extensional event is studied thanks to a dataset of more than hundred peak temperature measurement by Raman spectroscopy of the carbonaceous material (RSCM). The pre- and syn-rift metasediments are characterized by an intense ductile deformation. Field and EBSD investigations of the mechanisms of deformation reveal ductile and syn-metamorphic processes. The emplacement conditions of the peridotite into crustal levels and localized exhumation is examined in the key-localities of Urdach, Saraillé-Tos de la Coustette, Moncaup, Lherz, Caussou-Bestiac and Salvezines, The results indicate an early boudinage of the crust during the rifting process, resulting in the direct superposition of pre-rift sediments on top of mantle peridotites. Field, textural and isotopic characterization of the various ophicalcite and breccias found in the vicinity of the peridotite outcrops allow to decipher their exhumation history. New Ar-Ar geochronological results allow to precise the temporal evolution of the NPZ.
Cette thèse présente une analyse structurale et thermique des marges passives crétacées inversées dans la Zone Nord Pyrénéenne (ZNP). L'application du paléothermomètre RSCM (spectrométrie Raman de la matière carbonée) sur plus de cent échantillons répartis à travers la ZNP permet de préciser l'évolution thermique de la déchirure continentale. Un métamorphisme de haute température (450 à >600°C) se développe particulièrement au droit de zones ou la croûte continentale est extrêmement amincie voire éliminée. Les sédiments pré- et syn-rift sont marqués par une intense déformation ductile. L'analyse à l'EBSD des fabriques minérales indique une déformation de Haute-température contemporaine du métamorphisme HT-BP. Les conditions de mise en place crustale des péridotites et leur exhumation localisée sont examinées dans les localités d'Urdach, Saraillé-Tos de la Coustette, Moncaup, Lherz, Caussou-Bestiac et Salvezines. Les résultats indiquent un boudinage de la croûte continentale au cours du processus de rifting. Des décollements de couverture, principalement localisés dans les évaporites triasiques conduisent à la superposition directe des sédiments pré-rift sur le manteau exhumé. La notion nouvelle de soutirage crustal est introduite pour désigner ce processus dans lequel l'écoulement gravitaire ne joue pas un rôle principal. La caractérisation sédimentologique, pétrographique et isotopique (O et C) des différentes formations de brèches et ophicalcites observées à proximité des corps de péridotites permet de reconstituer les étapes de l'exhumation du manteau en pied de marge. Enfin de nouvelles datations permettent de mieux contraindre le calendrier des évènements successifs.
https://tel.archives-ouvertes.fr/tel-00787952

tel-00787952
https://tel.archives-ouvertes.fr/tel-00787952
https://tel.archives-ouvertes.fr/tel-00787952/document
https://tel.archives-ouvertes.fr/tel-00787952/file/TheI_se-Clerc-2012.pdf

Éditeur(s) : AGU
Résumé : Submarine canyons are narrow but deep submarine valleys that extend for hundreds of meters. They represent the most impressive structures that shape the present morphology of passive continental margins. They can occur off the mouth of rivers: the Tagus, Zaire, Amazon, and Orinoco in the Atlantic; the Indus in the Indian Ocean; and the Var, Rhone, and Ebro in the Mediterranean. Some are at times disconnected from any stream mouth such as the Nazare canyon, off Portugal, despite the fact that it is close to the coast. Some were connected to a river mouth during lowstands of sea level, such as the Wilmington canyon in the northwest Atlantic, or the Blackmud canyon in the northeast Atlantic.
EOS, Transactions American Geophysical Union (0096-3941) (AGU), 2004-07-06 , Vol. 85 , N. 27 , P. 257

Droits : 2004 AGU
http://archimer.ifremer.fr/doc/00071/18201/15769.pdf
DOI:10.1029/2004EO270001
http://archimer.ifremer.fr/doc/00071/18201/

Éditeur(s) : HAL CCSD Geological Society of America
Résumé : International audience
On the New Jersey shelf (offshore North America), the presence of pore water fresher than seawater is known from a series of boreholes completed during the 1970s and 1980s. To account for this fresh water, a fi rst hypothesis involves possible present-day active dynamic connections with onshore aquifers, while a second involves meteoritic and/or sub- ice-sheet waters during periods of lowered sea level. Expedition 313 drilled three boreholes on the middle shelf, offering a unique opportunity for the internal structure of the siliciclastic system to be accessed, at scales ranging from the depositional matrix to the continental margin. This enables the stratigraphic architecture to be correlated with the spatial distribution and salinity of saturating fl uids. Expedition 313 revealed both very low salinities (<3 g/L) at depths exceeding 400 m below the seafl oor and evidence for a multilayered reservoir organization, with freshand/ or brackish-water intervals alternating vertically with salty intervals. In this study we present a revised distribution of the salinity beneath the middle shelf. Our observations suggest that the processes controlling salinity are strongly infl uenced by lithology, porosity, and permeability. Saltier pore waters generally occur in coarse-grained intervals and fresher pore waters occur in fi ne-grained intervals. The transition from fresher to saltier intervals is often marked by cemented horizons that probably act as permeability barriers. In the lowermost parts of two holes, the salinity varies independently of lithology, suggesting different mechanisms and/or sources of salinity. We present an interpretation of the sedimentary facies distribution, derived from core, logs, and seismic profi le analyses, that is used to discuss the marginscale two-dimensional reservoir geometry and permeability distribution. These proposed geometries are of primary importance when considering the possible pathways and emplacement mechanisms for the fresh and salty water below the New Jersey shelf.
EISSN: 1553-040X

insu-00858241
https://hal-insu.archives-ouvertes.fr/insu-00858241
DOI : 10.1130/GES00855.1

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The Cycladic Blueschist Unit (CBU) represents the northern passive margin of the Adria continental block and ophiolites that are the remnants of the Pindos Ocean, which were affected by high pressure-low temperature metamorphism in the blueschist and eclogite facies during the Eocene. Prior to the Lutetian, the ophiolitic and margin units were thrust towards the SW inside a NE-dipping subduction zone. Two subsequent exhumation stages are characterized by top-to-the-NE senses of shear: i) from mantle depths to lower crustal levels, before 37 Ma, which was accommodated by an extensional inversion of the Vardar suture zone, and ii) from deep crustal levels to the near-surface, between 30 and 20 Ma, which was accommodated by the North Cycladic Detachment. It is during this late stage of ductile exhumation that the central Cyclades Core Complex was exhumed. Segmentation of the CBU by normal faults started at 12 Ma, as recorded by the low temperature thermochronometers, and was coeval with block rotation and folding with NS-trending axes, which were predominantly controlled by the Myrthes-Ikaria strike-slip fault in the centre of the Cyclades. A map restoration of the CBU geometry, prior to segmentation, has been carried out using available structural and paleomagnetic data. The restoration shows that, following the CBU exhumation from mantle depths to crustal levels, a single core complex was exhumed along a single NE dipping detachment.
ISSN: 0040-1951

insu-00672320
https://hal-insu.archives-ouvertes.fr/insu-00672320
DOI : 10.1016/j.tecto.2011.12.025

Éditeur(s) : HAL CCSD Elsevier
Résumé : We have integrated the relatively unknown distal domains of the Lower Congo basin, where the main depocenters of the Congo submarine fan are located, with the better-constrained successions on the shelf and upper slope, through the analysis of thousands of km of 2D seismic reflection profiles off-shore the Congo-Angola passive margin. The basin architecture is depicted by two ca. 800-km-long regional cross sections through the northern (Congo) and southern (Angola) margin. A large unit deposited basinward of the Aptian salt limit is likely to be the abyssal-plain equivalent of the upper-Cretaceous carbonate shelf that characterized the first post-rift deposits in West-equatorial African margins. A latest-Turonian shelf-deepening event is recorded in the abyssal plain as a long period (Coniacian-Eocene) of condensed sedimentation and basin starvation. The onset of the giant Tertiary Congo deep-sea fan in early Oligocene following this event reactivates the abyssal plain as the main depocenter of the basin. The time-space partitioning of sedimentation within the deep-sea fan results from the interplay among increasing sediment supply, margin uplift, rise of the Angola salt ridge, and canyon incision throughout the Neogene. Oligocene-early Miocene turbidite sedimentation occurs mainly in NW-SE grabens and ponded inter-diapir basins on the southern margin (Angola). Seaward tilting of the margin and downslope salt withdrawal activates the up-building of the Angola escarpment, which leads to a northward (Congo) shift of the transfer zones during late Miocene. Around the Miocene-Pliocene boundary, the incision of the Congo submarine canyon confines the turbidite flows and drives a general basinward progradation of the submarine fan into the abyssal plain The slope deposition is dominated by fine-grained hemipelagic deposits ever since. Results from this work contribute to better understand the signature in the ultra-deep deposits of processes acting on the continental margin as well as the basin-wide sediment redistribution in areas of high river input.
ISSN: 0040-1951

hal-00424533
https://hal.archives-ouvertes.fr/hal-00424533
DOI : 10.1016/j.tecto.2008.04.009

Éditeur(s) : HAL CCSD
Résumé : International audience
Sub-continental lithospheric mantle rocks are exhumed at the foot of magma-poor distal passive margins as aresponse to extreme stretching of the continental crust during plate separation. Remnants of the Northern Iberianpaleo-passive margin are now exposed in the North-Pyrenean Zone (NPZ) and represent field analogues to studythe processes of continental crust thinning and subcontinental mantle exhumation. The NPZ results from theinversion of basins opened between the Iberia and Europa plates during Albo-Cenomanian times. In the westernNPZ, the ‘Chaînons Béarnais’ ranges display a fold-and-thrust structure involving the Mesozoic sedimentarycover, decoupled from its continental basement and associated with peridotite bodies in tectonic contact withPalaeozoic basement lenses of small size. Continental extension developed under hot thermal conditions, asdemonstrated by the syn-metamorphic Cretaceous ductile deformation affecting both the crustal basement and theallochthonous Mesozoic cover.In this study, we present structural and geochemical data providing constraints to reconstruct the evolution ofthe northern Iberia paleo-margin. Field work confirms that the pre-rift Mesozoic cover is intimately associatedto mantle rocks and to thin tectonic lenses of crustal basement. It also shows that the pre-rift cover was detachedfrom its bedrock at the Keuper evaporites level and was welded to mantle rocks during their exhumation atthe foot of the hyper-extended margin. The crust/mantle detachment fault is a major shear zone characterizedby anastomosed shear bands defining a plurimetric phacoidal fabric at the top of the serpentinized mantle. Thedetachment is marked by a layer of metasomatic rocks, locally 20 meters thick, made of talc-chlorite-pyrite-richrocks that developped under greenschist facies conditions. Raman Spectroscopy on Carbonaceous Materials(RSCM), performed on the Mesozoic cover reveal that the entire sedimentary pile underwent temperatures rangingbetween 200C and 480C.We show that: (i) at the site of mantle rocks exhumation, the boudinaged pre-rift sediments have undergone drasticsyn-metamorphic thinning with the genesis of a S0/S1 foliation and, (ii) the Paleozoic basement has been ductilelydeformed, into thin tectonic lenses that remained welded to the exhumed mantle rocks. Therefore the overallcrustal rheology appears dominated by shallow levels having a ductile behavior. This rheology is related to thepresence of a thick pre- and syn-rift decoupled cover acting as an efficient thermal blanket. This new geologicaldata set highlights important characteristics of ductile-type hyper-extended passive margin that cannot be obtainedfrom the study of seismic lines. Finally, we stress that studying field analogues represents a major tool to betterunderstand the mechanisms of extreme crustal thinning associated with mantle exhumation and their structuralinheritance during tectonic inversion.
Geophysical Research Abstracts
Vienne, Austria

insu-01510103
https://hal-insu.archives-ouvertes.fr/insu-01510103

Éditeur(s) : HAL CCSD Elsevier
Résumé : The current interpretation of the Messinian Salinity Crisis (MSC) involves the deposition of the so-called “peripheral or marginal” evaporites in onshore basins, as well as the erosion of the margins and the formation of thick evaporites in the deep parts of the basins. The present study focuses on intermediate depth basins, i.e. located between the onshore outcrops and the deep basins. Indeed, the Balearic Promontory shows small stepped basins filled with MSC deposits between its western extremity on the Alicante shelf and its eastern end around the Menorca block. New and already available seismic reflection profiles and onshore data allow us to investigate the nature and geometrical relationships of these deposits in the area between the islands of Ibiza and Mallorca.Our observations suggest the existence of three MSC-related units in this area. The lowermost transparent seismic unit can be interpreted as a 100 to 200-m-thick salt layer deposited in the deepest part of the Central Mallorca Depression. These evaporites pass laterally and upward into a thin-bedded seismic unit, which could be lithologically equivalent to the Upper Evaporites of the deep basins. All around the borders of the Central Mallorca Depression, this bedded seismic unit onlaps a Slope Unit which shows bedded to chaotic and rafted facies. The Messinian continental shelf is eroded and incised by a valley extending from the Palma onshore area to the Mallorca downslope domain.Our results suggest the presence offshore of at least two generations of diachronous MSC deposits. The observation of salt on a continental high and the widespread MSC deposits on the margins of the Central Mallorca Depression call into question the location of halite preferentially in the deep abyssal basins and the significance of the deep basin MSC units that onlap onto the Margin Erosional Surface (MES), as observed all around the passive margins of the Northwest-Mediterranean Basin. The dual terminology used for peripheral/deep MSC evaporites cannot be applied to any of the MSC units found in the study area.
ISSN: 0025-3227

hal-01115656
https://hal.archives-ouvertes.fr/hal-01115656
DOI : 10.1016/j.margeo.2014.10.001

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
After Jurassic rifting, numerous carbonate platforms (i.e., the Orizaba, Cordoba and Golden Lane-Tuxpan platforms) developed during the Lower and Middle Cretaceous episode of thermal subsidence along the western passive margin of the Gulf of Mexico, with intervening basinal domains (i.e., the Tampico-Misantla, Zongolica, Veracruz and Deep Gulf of Mexico - DGM - basins).;During the Late Cretaceous-Paleocene, the east-verging Sierra Madre Oriental thrust belt developed, resulting in tectonic uplift and unroofing of the allochthonous units (i.e. tectonic units made up of former Orizaba and Cordoba platforms and Zongolica Basin series). This new topography provided also an important source of clastics to feed the adjacent foredeep, where coeval tectonic loading accounted for the bending of the foreland lithosphere. However, shallow water facies or even emersion persisted until the Eocene in the forebulge area (at the present location of the Golden Lane), preventing locally the clastics to reach the DGM. This topographic barrier was ultimately bypassed by the clastics only during the Oligocene and Neogene, once (1) the prograding clastic wedge had exceeded accommodation, and (2) the long lasting thermal subsidence of the passive margin could overpass the effect of the bending and force the former bulge to sink.;Numerous paleo-thermo-meters (Tmax, Ro), paleo-thermo-barometers (fluid inclusions), PVT and coupled forward kinematic and thermal modeling have been used to calibrate and date the progressive unroofing of the thrust belt. Coupled tectonic and sedimentologic modeling was applied in the foreland to predict the distribution of sand versus shale ratios in the Oligocene to Plio-Quaternary clastic sedimentary wedge of the passive margin, where gravitational gliding of post-Eocene series occurred during the Neogene along major listric faults.;Mantle dynamics are advocated as the main process accounting for post-orogenic uplift and regional tilting of the basement, which initiated a massive transfer of sediments from the Cordillera towards the Gulf of Mexico, from Oligocene onward, resulting in a destabilization and gravitational collapse of the western slope of the Gulf of Mexico in Neogene times.
ISSN: 0040-1951

hal-00445248
https://hal.archives-ouvertes.fr/hal-00445248
DOI : 10.1016/j.tecto.2009.04.012

Éditeur(s) : HAL CCSD American Geophysical Union (AGU)
Résumé : Present Address : ISTO - UMR7327
International audience
The pre-rift Mesozoic sequences of the Cretaceous passive margins fossilized in the North Pyrenean Zone (NPZ) are characterized by high temperature deformation in relation with thinning of the continental basement. Our compilation of chronological and geological data confirms a clear correlation between the distribution of the highest paleotemperatures in the pre-rift sedimentary cover and the loci of extreme crustal stretching. Geological evidences such as the occurrence of peridotite bodies directly underlying metamorphic pre-rift sediments indicate an early attenuation of the rifted continental crust. This leads us to propose a mechanism of rifting involving boudinage of the continental crust. The lateral extraction of the Paleozoic basement occurred under the pre-rift cover that is decoupled on the Triassic clays and evaporates. The thermal conditions allowing coeval ductile deformation of the crust and of the pre-rift sediments leaded to the widening of basins devoid of large faulted blocks. We discuss the implications on the origin and significance of the granulites and the relations between flysch deposition and high temperature metamorphism of the pre-rift sediments. In the NPZ, Albian-Cenomanian flysch sequences were deposited synchronously with the syn-metamorphic ductile deformation of the pre-rift sequences. Since the base of the flysch deposits also recorded locally the high-temperature tectonic event, we propose an original mechanism for the evolution of the basins involving continuous deformation of the pre-rift metamorphic sediments. At the scale of the Pyrenean domain, our results suggest a strong lateral variability in the tectonic style of passive margins, in direct link with their thermic pattern
ISSN: 0278-7407

insu-01017432
https://hal-insu.archives-ouvertes.fr/insu-01017432
https://hal-insu.archives-ouvertes.fr/insu-01017432/document
https://hal-insu.archives-ouvertes.fr/insu-01017432/file/tect20164.pdf
DOI : 10.1002/2013TC003471

Éditeur(s) : HAL CCSD
Résumé : International audience
The Cenozoic weathering of peninsular India has been advocated as a major driver of globalcooling, however, its timing remains virtually unconstrained such that proposed links betweentropical weathering of the Deccan Traps, regional monsoonal intensity and global climate remainsspeculative. To solve this conundrum we present here a revised weathering chronologybased on the identification of lateritic paleosurfaces and their dating using 40Ar/39Ar on supergeneK-rich manganese oxides. We focus on the Indian western passive margin where theWestern Ghats Escarpment (WGE) – a ~1000 m high topographic barrier resulting from thecontinental break up of Greater India – exposes exceptionally preserved weathering profilesfrom the western coastal lowlands to the eastern highland plateaus above the WGE. Four mainlateritic paleosurfaces have been identified: Three in the highland; a high landsurface (Al-Femostly bauxite) at elevation 1200-1000 m asl, an intermediate landsurface covered by a Feduricrustat 1000-900 m asl and a lower pediment landsurface at 850-600 m asl; and one inthe coastal lowland underneath a pediment landsurface at 150-50 m asl. The 40Ar/39Ar agesdocument three major weathering periods over the Cenozoic. The oldest weathering period(W1) is recorded between 53 Ma to 45 Ma both in the highland and the lowland. This correlatesto the Global Eocene climatic Optimum, and allows defining a bauxitic paleolandsurface acrossthe escarpment. Intense bauxitic weathering between ~ 45 and 47 Ma in the lowland indicatethat the WGE was stabilized before ~ 47 Ma on its margin and also implies low denudation rateat the foot of the WGE (<5 m Ma-1) since that time. The second weathering period between37 Ma to 19 Ma (W2) occurred in two distinctive stages (W2a and W2b). From 37 to 26 (W2a),weathering is only recorded in the highland and affect intermediate surfaces. The intensityof chemical weathering decreased sensibly between 32 and 29 Ma – potentially linked to theEarly Oligocene cooling – and resulted in the formation of the lower pediment surface. From~26 Ma to 19 Ma (W2b), only the western coastal lowland weathered while the highland surfacesare mostly dissected. This change and the highland/lowland weathering mitigation after~26 Ma documents a change in climatic patterns over peninsular India that signs the onset ofmodern-like monsoon regime. These results are being interpolated to the Deccan Traps basaltsto quantify their weathering and ultimately estimate of the contribution to CO2 fluxes of thesethree weathering periods and their potential link to Asian Monsoons and global cooling.
Source to Sink: a long term perspective of sediment budgets and sources characterization, Abstracts
Rennes, France

insu-01406455
https://hal-insu.archives-ouvertes.fr/insu-01406455

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
This paper focuses on the analyses of the clastic sedimentary infill of the Coastal Plain of Eastern Mexico, which initiated synchronously with the Laramide orogeny in the vicinity of the Golden Lane. Results of these analyses are used as boundary conditions for calibrating/interpreting seismic profiles across more distal depocenters in the offshore of the Gulf of Mexico, from the sea shore and continental slope in the west to the abyssal plain in the east. The objective of the study is to better predict the reservoir distribution in the Deep offshore Basin of the Gulf of Mexico (DBGM), in order to explore for petroleum. The Coastal Plain is underlain by three morpho-tectonic domains: the tectonic front of the Sierra Madre Orientale (SMO), the Chicontepec deep water flexural basin, and the Tuxpan Platform (also known as the Golden Lane). Each domain is characterized by a distinct, dominantly siliciclastic Cenozoic lithostratigraphy. After a Jurassic rifting episode, followed by thermal subsidence, the oceanic basin and its western passive margin were deformed during the Upper Cretaceous and Paleogene, by far field stresses associated with the Cordilleran-Laramide Orogeny. Starting in the Late Cretaceous-Early Paleogene and during the Early Eocene, the tectonic load associated with the Laramide Orogen (Sierra Madre Oriental, SMO) caused flexural subsidence of the foreland located under the Coastal Plain. During this period, a massive transfer of siliciclastic sediments occurred from the Laramide foothills into the adjacent foreland. Sediments were eroded of the Sierra Madre tectonic wedge. Loading by these sediments pushed source units associated with the former passive margin down ward. The first syn-tectonic sediments of the Laramide orogeny were turbiditic silt layers in submarine fans which record also numerous collapse episodes and gravity slides. During the Late Eocene and Oligocene, the flexural subsidence stopped in the hinterland, whereas the subsidence of the passive margin resumed. This resulted in a change in the overall sedimentary architecture of the basin. Paleo-highs and reefs facies of the Golden Lane were flooded. Clastics by-passed the reefs and progradational clastic stratification formed as sediment moved towards the DBGM in the east. The final depositional environment of the continental platform/Coastal Plain became deltaic, marked by a succession of sand bars, levees and channels systems. From Miocene times onward, a system of gravitational listric faults developed near the platform to slope transition, resulting in a coeval compressional system at the transition between the slope and the abyssal plain. This system is driven by sediments charge. Because the sedimentation rate is larger than the subsidence, a large amount of clastics and slumped sediments are deposited in hangingwall basins.
ISSN: 0264-8172

hal-00424586
https://hal.archives-ouvertes.fr/hal-00424586
DOI : 10.1016/j.marpetgeo.2008.03.009

Éditeur(s) : HAL CCSD Elsevier Masson
Résumé : International audience
The Chaînons Béarnais ranges (North-Pyrenean Zone, west-central Pyrenees) display a fold-and-thrust structure involving the Mesozoic sedimentary cover, decoupled from its substratum at the Keuper evaporites level and associated with a few peridotite bodies and scarce Palaeozoic basement lenses. In the western part of the Chaînons Béarnais, the newly described recumbent fold of the Saraillé massif comprises a peridotite body and several lenses of Palaeozoic basement wrapped by the Triassic to Aptian sedimentary cover. This structure represents a remnant of the distal portion of the Pyrenean paleo-rifted margin where mantle rocks have been exhumed during Albian–Cenomanian times. In this paper, we present the first detailed mapping and microstructural analysis of the Saraillé massif, providing new geological basis for reconstructing the evolution of this part of the paleo-margin. Our mapping (i) shows that the pre-rift Mesozoic cover forms a recumbent fold cored by mantle and crustal rocks and (ii) confirms that the prerift cover was detached from its bedrock along a layer of Triassic evaporites and slid onto the exhumed mantle rocks. Sliding of the prerift cover was associated with extreme crustal thinning and mantle exhumation along a major detachment fault, together with intense metasomatism affecting both the continental basement and the sedimentary cover. We show for the first time (1) that the Mesozoic pre-rift sediments experienced syn-metamorphic ductile thinning during mantle exhumation, and (2) that during its extreme attenuation, the continental basement was reduced to tectonic lenses some ten meters thick by ductile shearing.
ISSN: 1631-0713

insu-01265777
https://hal-insu.archives-ouvertes.fr/insu-01265777
https://hal-insu.archives-ouvertes.fr/insu-01265777/document
https://hal-insu.archives-ouvertes.fr/insu-01265777/file/corre-CRGeosc-2016.pdf
DOI : 10.1016/j.crte.2015.11.007

Éditeur(s) : HAL CCSD European Geosciences Union
Résumé : International audience
An increasing number of field examples in mountain belts show that the formation of passive margins during extreme continent thinning may occur under conditions of high to very high thermal gradient beneath a thin cover of syn-rift sediments. Orogenic belts resulting from the tectonic inversion of distal margins and regions of exhumed continental mantle may exhibit high-temperature, low-pressure (HT-LP) metamorphism and coeval syn-extensional, ductile deformation. Recent studies have shown that the northern flank of the Pyrenean belt, especially the North Pyrenean Zone, is one of the best examples of such inverted hot, passive margin. In this study, we provide a map of HT-LP metamorphism based on a data set of more than 100 peak-temperature estimates obtained using Raman spectroscopy of the carbona-ceous material (RSCM). This data set is completed by previous PT (pressure and temperature) estimates based on mineral assemblages, and new 40 Ar– 39 Ar (amphibole, micas) and U–Pb (titanite) ages from metamorphic and magmatic rocks of the North Pyrenean Zone. The implications on the geological evolution of the Cretaceous Pyrenean paleomar-gins are discussed. Ages range mainly from 110 to 90 Ma, and no westward or eastward propagation of the metamor-phism and magmatism can be clearly identified. In contrast, the new data reveal a progressive propagation of the thermal anomaly from the base to the surface of the continental crust. Focusing on the key localities of the Mauléon basin, Arguenos–Moncaup, Lherz, Boucheville and the Bas-Agly, we analyze the thermal conditions prevailing during the Cre-taceous crustal thinning. The results are synthetized into a series of three regional thematic maps and into two detailed maps of the Arguenos–Moncaup and Lherz areas. The results indicate a first-order control of the thermal gradient by the intensity of crustal thinning. The highest grades of metamor-phism are intimately associated with the areas where subcon-tinental mantle rocks have been unroofed or exhumed.
ISSN: 1869-9510

insu-01161826
https://hal-insu.archives-ouvertes.fr/insu-01161826
https://hal-insu.archives-ouvertes.fr/insu-01161826/document
https://hal-insu.archives-ouvertes.fr/insu-01161826/file/PL03457.pdf
DOI : 10.5194/se-6-643-2015

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Tethyan ophiolites show an apparent poorly organized association of ultramafic andmafic rocks. By contrast tothe complete mantle-crustal sections of Semail-type ophiolite sheets, Tethyan ophiolites are characterized by asmaller amount of mafic rocks (gabbros and basalts), by the absence of any sheeted dyke complex and by thefrequent occurrence of oceanic sediments stratigraphically overlying mantle-derived peridotites and associatedgabbroic intrusions. Therefore, they are considered as typical remnants of oceanic lithosphere formed in slowspreadingenvironment or in ocean–continent transition at distal passive margins. In the very first models offormation of the Tethyan ophiolites, in the years 1980, the geodynamical processes leading to mantle unroofingwere poorly understood due to the paucity of data and concepts available at that time from the present-dayoceans. In particular, at that time, little work had focused on the distribution, origin and significance ofmafic rocks with respect to the dominant surrounding ultramafics. Here, we reconsider the geology of sometypical metaophiolites from the Western Alps and Corsica, and we show how results from the past decadeobtained in the current oceans ask for reassessing the significance of the Tethyan ophiolites in general. Revisitedexamples include a set of representative metaophiolites from the blueschists units of the Western Alps (Queyrasregion) and from Alpine Corsica (Golo Valley). Field relationships between the ophiolitic basement andthe metasedimentary/metavolcanic oceanic cover are described, outlining a typical character of the Tethyanophiolite lithological associations. Jurassic marbles and polymictic ophiolite metabreccias are unconformablyoverlying the mantle-gabbo basement, in a way strictly similar to what is observed in the non-metamorphicAppennine ophiolites or Chenaillet massif. This confirms that very early tectonic juxtaposition of ultramafic andmafic rocks occurred in the oceanic domain before subduction. This juxtaposition resulted from tectonic activitythat is now assigned to the development of detachment faults and to the formation of Oceanic Core Complexes(OCCs) at the axis of slow spreading ridges. This fundamental Plate Tectonics process is responsible for the exhumationand for the axial denudation of mantle rocks and gabbros at diverging plate boundaries. In addition, fieldrelationships between the discontinuous basaltic formations and the ultramafic–mafic basement indicate that thistectonic stage is followed or not by a volcanic stage.We discuss this issue in the light of available field constraints.
ISSN: 0012-8252

insu-01096467
https://hal-insu.archives-ouvertes.fr/insu-01096467
https://hal-insu.archives-ouvertes.fr/insu-01096467/document
https://hal-insu.archives-ouvertes.fr/insu-01096467/file/Lagabrielle-EarthSciRev-2014.pdf
DOI : 10.1016/j.earscirev.2014.11.004

Éditeur(s) : HAL CCSD
Résumé : The mantle deformation processes that control the thinning and break-up of continental lithosphere remain poorly understood. Our knowledge is restricted to either lithospheric scale thermo-mechanical models --that use experimentally derived flow laws--, geophysical imaging and/or rare xenoliths from active continental rifts, such as the East African Rift System. The originality of this work relies on the study of the two largest outcrops of diamond facies subcontinental lithospheric mantle in the world: the Beni Bousera and Ronda peridotite massifs in N Morocco and S Spain, respectively. The structures and petrologic and metamorphic zoning preserved in these massifs --implying a polybaric and polythermal evolution-- provides a unique opportunity to investigate the thermo-mechanical evolution of thick subcontinental lithospheric mantle in extensional settings. In this thesis we studied the deformation mechanisms in both peridotites and pyroxenites to constrain the modes of exhumation of subcontinental lithospheric mantle from garnet-, to spinel-, and finally, to plagioclase lherzolite facies conditions. We combined field mapping of tectonometamorphic domains and structural mapping of ductile structures, microstructural analysis, crystal preferred orientations (CPO) measurements and conventional thermobarometric calculations and thermodynamic modeling (Perple_X) to unravel the pressure and temperature conditions of deformation. We showed that exhumation from garnet- to spinel lherzolite facies conditions was accommodated by fast shearing --in thermal disequilibrium--along a lithospheric scale transtensional shear zone. In this context, the petrological zoning and the large temperature gradient (ca. 100ºC/km) preserved in the Beni Bousera massif represent the mechanical juxtaposition of progressively deeper and hotter lithospheric levels at depths of ca. 60 km in the latest Oligocene (ca. 25 Ma). Final exhumation from spinel- to plagioclase facies lherzolite and emplacement into the crust is best recorded in the Ronda massif where it occurred by inversion and lithospheric scale folding of the highly attenuated continental lithosphere in a back-arc region, probably in relation with southward slab rollback and subsequent collision with the palaeo-Maghrebien passive margin in the early Miocene (21-23 Ma).
Les processus de déformation contrôlant l'amincissement de la lithosphère continentale sont encore mal contraints. Nos connaissances sont principalement basées sur la modélisation thermomécanique d'extension à l'échelle de la lithosphère--utilisant des lois rhéologiques derivées expérimentalement, l'imagerie géophysique et l'analyse de xénolithes provenant de rift continentaux actifs à ce jour, tels que le Rift Est-Africain. L'originalité de ce travail reside dans l'étude des deux plus grands massifs de péridotites sous-continentales ayant enregistrées des conditions primaires du facies à diamant: les massifs de Beni Bousera au nord du Maroc et de Ronda au sud de l'Espagne, respectivement. Les structures et la zonation petrologique et métamorphique --impliquant une évolution polybarique et polythermique-- préservéees dans ces massifs offrent une opportunité unique pour étudier l'évolution thermo-mécanique du manteau sous-continental dans un contexte extensif. Dans ce travail, nous avons étudié les mécanismes de déformation des péridotites et des pyroxénites afin de contraindre les modes d'exhumation du manteau lithosphérique sous-continental, depuis des conditions du facies des lherzolites à grenat, jusqu'au facies à spinelle et enfin à plagioclase. Nous avons combiné la cartographie des faciès tectono-métamorphiques et des structures ductiles de déformation, l'analyse des microstructures, la mesure d'orientations préférentielles de réseau (OPR), et la géothermobarométrie conventionelle couplée à la modélisation thermodynamique (PerpleX) afin de contraindre les conditions de pression et température de la déformation. Nous avons montré que l'exhumation précoce du facies à grenat au facies à spinelle était accomodée par une faille transtensive affectant le manteau lithosphérique. Dans ce contexte, la zonation tectono-métamorphique et le gradient thermique important (ca. 100ºC/km) préservés à Beni Bousera résultent de la juxtaposition mécanique de domaines lithosphériques initialement équilibrés à différentes pressions et températures, fossilisée à une profondeur de ca. 60 km durant l'Oligocène supérieur (ca. 25 Ma). L'exhumation finale du facies de lherzolite à spinelle au facies à plagioclase et l'emplacement final dans la croûte, mieux enregistrés dans Ronda, se sont produits par inversion et plissement de la section lithosphérique fortement amincie dans un contexte arrière-arc, probablement lors du retrait vers le sud de la lithosphère subduite et la collision de l'arc avec les paléo-marges maghrébines au Miocène inférieur (21-23 Ma).
https://tel.archives-ouvertes.fr/tel-00767700

tel-00767700
https://tel.archives-ouvertes.fr/tel-00767700
https://tel.archives-ouvertes.fr/tel-00767700/document
https://tel.archives-ouvertes.fr/tel-00767700/file/THESE_Frets.pdf

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The continental South Armenian Block – part of the Anatolide–Tauride South Armenian microplate – of Gondwana origin rifted from the African margin after the Triassic and collided with the Eurasian margin after the Late Cretaceous. During the Late Cretaceous, two northward dipping subduction zones were simultaneously active in the northern Neo-Tethys between the South Armenian Block in the south and the Eurasian margin in the north: oceanic subduction took place below the continental Eurasian margin and intra-oceanic subduction resulted in ophiolite obduction onto the South Armenian Block in the Late Cretaceous.The paleolatitude position of the South Armenian Block before its collision with Eurasia within paleogeographic reconstructions is poorly determined and limited to one study. This earlier study places the South Armenian Block at the African margin in the Early Jurassic. To reconstruct the paleolatitude history of the South Armenian Block, we sampled Upper Devonian–Permian and Cretaceous sedimentary rocks in Armenia. The sampled Paleozoic rocks have likely been remagnetized. Results from two out of three sites sampled in Upper Cretaceous strata pass fold tests and probably all three carry a primary paleomagnetic signal. The sampled sedimentary rocks were potentially affected by inclination shallowing. Therefore, two sites that consist of a large number of samples (> 100) were corrected for inclination shallowing using the elongation/inclination method.These are the first paleomagnetic data that quantify the South Armenian Block's position in the Tethys ocean between post-Triassic rifting from the African margin and post-Cretaceous collision with Eurasia. A locality sampled in Lower Campanian Eurasian margin sedimentary rocks and corrected for inclination shallowing, confirms that the corresponding paleolatitude falls on the Eurasian paleolatitude curve. The north–south distance between the South Armenian Block and the Eurasian margin just after Coniacian–Santonian ophiolite obduction was at most 1000 km.
ISSN: 0040-1951

hal-01365871
https://hal.archives-ouvertes.fr/hal-01365871
DOI : 10.1016/j.tecto.2015.01.012

Éditeur(s) : American Geophysical Union
Résumé : We present four companion digital models of the age, age uncertainty, spreading rates, and spreading asymmetries of the world's ocean basins as geographic and Mercator grids with 2 arc min resolution. The grids include data from all the major ocean basins as well as detailed reconstructions of back-arc basins. The age, spreading rate, and asymmetry at each grid node are determined by linear interpolation between adjacent seafloor isochrons in the direction of spreading. Ages for ocean floor between the oldest identified magnetic anomalies and continental crust are interpolated by geological estimates of the ages of passive continental margin segments. The age uncertainties for grid cells coinciding with marine magnetic anomaly identifications, observed or rotated to their conjugate ridge flanks, are based on the difference between gridded age and observed age. The uncertainties are also a function of the distance of a given grid cell to the nearest age observation and the proximity to fracture zones or other age discontinuities. Asymmetries in crustal accretion appear to be frequently related to asthenospheric flow from mantle plumes to spreading ridges, resulting in ridge jumps toward hot spots. We also use the new age grid to compute global residual basement depth grids from the difference between observed oceanic basement depth and predicted depth using three alternative age-depth relationships. The new set of grids helps to investigate prominent negative depth anomalies, which may be alternatively related to subducted slab material descending in the mantle or to asthenospheric flow. A combination of our digital grids and the associated relative and absolute plate motion model with seismic tomography and mantle convection model outputs represents a valuable set of tools to investigate geodynamic problems.
Geochemistry Geophysics Geosystems - G3 (1525-2027) (American Geophysical Union), 2008-04 , Vol. 9 , P. NIL_18-NIL_36

Droits : 2008 American Geophysical Union
http://archimer.ifremer.fr/doc/2008/publication-3900.pdf
DOI:10.1029/2007GC001743
http://archimer.ifremer.fr/doc/00000/3900/