Éditeur(s) : HAL CCSD AGU and the Geochemical Society
Résumé : International audience
Microbathymetry data, in situ observations, and sampling along the 13°20′N and 13°20′N oceanic core complexes (OCCs) reveal mechanisms of detachment fault denudation at the seafloor, links between tectonic extension and mass wasting, and expose the nature of corrugations, ubiquitous at OCCs. In the initial stages of detachment faulting and high-angle fault, scarps show extensive mass wasting that reduces their slope. Flexural rotation further lowers scarp slope, hinders mass wasting, resulting in morphologically complex chaotic terrain between the breakaway and the denuded corrugated surface. Extension and drag along the fault plane uplifts a wedge of hangingwall material (apron). The detachment surface emerges along a continuous moat that sheds rocks and covers it with unconsolidated rubble, while local slumping emplaces rubble ridges overlying corrugations. The detachment fault zone is a set of anostomosed slip planes, elongated in the along-extension direction. Slip planes bind fault rock bodies defining the corrugations observed in microbathymetry and sonar. Fault planes with extension-parallel stria are exposed along corrugation flanks, where the rubble cover is shed. Detachment fault rocks are primarily basalt fault breccia at 13°20′N OCC, and gabbro and peridotite at 13°30′N, demonstrating that brittle strain localization in shallow lithosphere form corrugations, regardless of lithologies in the detachment zone. Finally, faulting and volcanism dismember the 13°30′N OCC, with widespread present and past hydrothermal activity (Semenov fields), while the Irinovskoe hydrothermal field at the 13°20′N core complex suggests a magmatic source within the footwall. These results confirm the ubiquitous relationship between hydrothermal activity and oceanic detachment formation and evolution.
ISSN: 1525-2027

hal-01571973
https://hal.archives-ouvertes.fr/hal-01571973
https://hal.archives-ouvertes.fr/hal-01571973v2/document
https://hal.archives-ouvertes.fr/hal-01571973/file/Escart-n_et_al-2017-Geochemistry%2C_Geophysics%2C_Geosystems.pdf
DOI : 10.1002/2016GC006775

Éditeur(s) : HAL CCSD Springer Verlag
Résumé : International audience
We show here that the Amalaoulaou complex, in the Pan-African belt of West Africa (Gourma, Mali), corresponds to the lower and middle sections of a Neoproterozoic intra-oceanic arc. This complex records a 90-130-Ma-long evolution of magmatic inputs and differentiation above a subducting oceanic slab. Early c. 793 Ma-old metagabbros crystallised at lower crustal or uppermost mantle depths (25-30 km) and have geochemical characteristic of high-alumina basalts extracted from a depleted mantle source slightly enriched by slab-derived sedimentary components ((La/Sm)(N) < 1; epsilon(Nd): +5.4-6.2; Sr-87/Sr-86: 0.7027-0.7029). In response to crustal thickening, these mafic rocks were recrystallised into garnet-granulites (850-1,000A degrees C; 10-12 kbar) and subject to local dehydration-melting reactions, forming trondhjemititic leucosomes with garnet-clinopyroxene-rutile residues. Slightly after the granulitic event, the arc root was subject to strong HT shearing during partial exhumation (detachment faults/rifting or thrusting), coeval with the emplacement of spinel- and garnet-pyroxenite dykes crystallised from a high-Mg andesitic parental magma. Quartz and hornblende-gabbros (700-660 Ma) with composition typical of hydrous volcanic rocks from mature arcs ((La/Sm)(N): 0.9-1.8; epsilon(Nd): +4.6 to +5.2; Sr-87/Sr-86: 0.7028-0.7031) were subsequently emplaced at mid-arc crust levels (similar to 15 km). Trace element and isotopic data indicate that magmas tapped a depleted mantle source significantly more enriched in oceanic sedimentary components (0.2%). Exhumation occurred either in two stages (700-660 and 623 Ma) or in one stage (623 Ma) with a final exhumation of the arc root along cold P-T path (550A degrees C, 6-9 kbar; epidote-amphibolite and greenschist facies conditions) during the main Pan-African collision event (620-580 Ma). The composition of magmas forming the Cryogenian Amalaoulaou arc and the processes leading to intra-arc differentiation are strikingly comparable to those observed in the deep section of exposed Mezosoic oceanic arcs, namely the Kohistan and Talkeetna complex. This evolution of the Amalaoulaou oceanic arc and its accretion towards the West African craton belong to the life and closure of the Pharusian Ocean that eventually led to the formation of the Greater Gondwana supercontinent, a similar story having occurred on the other side of the Sahara with the Mozambique Ocean.
ISSN: 0010-7999

hal-00639447
https://hal.archives-ouvertes.fr/hal-00639447
DOI : 10.1007/s00410-011-0624-5

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The Chenaillet Ophiolite in the Franco-Italian Alps represents a well-exposed ocean-floor sequence that was only weakly overprinted by Alpine metamorphism during its emplacement in the Alpine nappe stack. Pillow lavas showing a Mid Ocean Ridge Basalt (MORB) signature overlie tectonically exhumed gabbros and serpentinized mantle rocks similar to oceanic core complexes (OCC) described from present-day slow- to ultraslow-spreading ridges. Based on detailed mapping it can be shown that: 1) syn-magmatic high-temperature shear zones are truncated by oceanic detachment faults; 2) sediments consisting exclusively of clasts derived from the footwall of the detachment are overlain by voluminous lavas, and 3) emplacement of lavas is linked with high-angle faulting that overprint the oceanic detachment fault. Based on stratigraphic and cross cutting relationships we conclude that: 1) a complex relation between high- and low-temperature shear zones exists, 2) oceanic detachment faults may be obliterated by later emplaced of MOR basalts, and 3) high-angle faults may serve at shallow levels as feeder channels for the overlying pillow basalts. These observations raise questions about the relative relations in time and space between magmatic, hydrothermal and tectonic processes at spreading systems. We propose that the observed change from exhumation along an oceanic detachment fault to high-angle faulting associated with extrusion of volcanic rocks may represent an evolution within a life cycle of a spreading system that may be comparable to present-day slow- to ultraslow-spreading ridges.
ISSN: 0024-4937

hal-00617678
https://hal.archives-ouvertes.fr/hal-00617678
DOI : 10.1016/j.lithos.2010.10.017

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Tethyan ophiolites show an apparent poorly organized association of ultramafic andmafic rocks. By contrast tothe complete mantle-crustal sections of Semail-type ophiolite sheets, Tethyan ophiolites are characterized by asmaller amount of mafic rocks (gabbros and basalts), by the absence of any sheeted dyke complex and by thefrequent occurrence of oceanic sediments stratigraphically overlying mantle-derived peridotites and associatedgabbroic intrusions. Therefore, they are considered as typical remnants of oceanic lithosphere formed in slowspreadingenvironment or in ocean–continent transition at distal passive margins. In the very first models offormation of the Tethyan ophiolites, in the years 1980, the geodynamical processes leading to mantle unroofingwere poorly understood due to the paucity of data and concepts available at that time from the present-dayoceans. In particular, at that time, little work had focused on the distribution, origin and significance ofmafic rocks with respect to the dominant surrounding ultramafics. Here, we reconsider the geology of sometypical metaophiolites from the Western Alps and Corsica, and we show how results from the past decadeobtained in the current oceans ask for reassessing the significance of the Tethyan ophiolites in general. Revisitedexamples include a set of representative metaophiolites from the blueschists units of the Western Alps (Queyrasregion) and from Alpine Corsica (Golo Valley). Field relationships between the ophiolitic basement andthe metasedimentary/metavolcanic oceanic cover are described, outlining a typical character of the Tethyanophiolite lithological associations. Jurassic marbles and polymictic ophiolite metabreccias are unconformablyoverlying the mantle-gabbo basement, in a way strictly similar to what is observed in the non-metamorphicAppennine ophiolites or Chenaillet massif. This confirms that very early tectonic juxtaposition of ultramafic andmafic rocks occurred in the oceanic domain before subduction. This juxtaposition resulted from tectonic activitythat is now assigned to the development of detachment faults and to the formation of Oceanic Core Complexes(OCCs) at the axis of slow spreading ridges. This fundamental Plate Tectonics process is responsible for the exhumationand for the axial denudation of mantle rocks and gabbros at diverging plate boundaries. In addition, fieldrelationships between the discontinuous basaltic formations and the ultramafic–mafic basement indicate that thistectonic stage is followed or not by a volcanic stage.We discuss this issue in the light of available field constraints.
ISSN: 0012-8252

insu-01096467
https://hal-insu.archives-ouvertes.fr/insu-01096467
https://hal-insu.archives-ouvertes.fr/insu-01096467/document
https://hal-insu.archives-ouvertes.fr/insu-01096467/file/Lagabrielle-EarthSciRev-2014.pdf
DOI : 10.1016/j.earscirev.2014.11.004

Éditeur(s) : HAL CCSD Oxford University Press (OUP): Policy B - Oxford Open Option A Oxford University Press (OUP)
Résumé : International audience
Peridotites exhumed in the footwall of axial detachment faults at slow-spreading ridges are highly serpentinized. Most mid-ocean ridge detachment settings are magmatically active and hydrous fluid circulation in and near the fault has been shown to be influenced by the presence of melt or magmatic lithologies. Our working area along the Southwest Indian Ridge (62–65°E) is nearly amagmatic and represents an end-member to study the hydrous alteration of exhumed peridotites without these magmatic influences. We use an integrated petrological approach combining microstructural, mineralogical and chemical observations to unravel the sequence of serpentinization in 272 dredged samples of variably serpentinized peridotites and to document the circulation of serpentinizing fluids in and near the exhumation faults. We find that serpentine recrystallization and veins overprint the initial serpentinite mesh texture in ∼25% of the samples. Oxygen isotope data suggest that this sequence developed at relatively high temperatures (271–336°C) and under increasing fluid–rock ratios, from near stoichiometry for mesh texture formation to >10 during recrystallization. Increasing fluid supersaturation relative to serpentine favors the replacement of mesh texture lizardite by chrysotile and polygonal or polyhedral serpentine. We attribute local recrystallization into antigorite to moderate Si-metasomatism, possibly following pyroxene serpentinization. We do not observe the more pronounced Si-metasomatism leading to talc replacing serpentine that is reported for the more magmatically active Mid-Atlantic Ridge detachment settings and is attributed to prior leaching of magmatic rocks. Scales of preferential fluid pathways in our samples evolved from pervasive and close-spaced (<500 µm) microfractures during the formation of the initial serpentine mesh texture, to centimeter-thick planar domains of enhanced fluid flux, spaced at ∼10 cm intervals and probably grouped in corridors that may be up to ∼100 m across. Serpentine minerals are enriched in some fluid-mobile elements (Cl, B, U) relative to the peridotite protolith, and several elements (Al, Fe, Si, Cu, As, Sb, REE) are redistributed at the millimeter to decimeter scale. Serpentinizing fluids were seawater-derived, probably mildly alkaline (small to no europium anomalies), reducing and H2-enriched (formation of magnetite). These fluids may have been similar to, though warmer than, those venting at the ultramafic-hosted Lost City hydrothermal fluid (30°N, Mid-Atlantic Ridge).
ISSN: 0022-3530

hal-01174047
https://hal.archives-ouvertes.fr/hal-01174047
DOI : 10.1093/petrology/egv014

Éditeur(s) : HAL CCSD AGU and the Geochemical Society
Résumé : International audience
We herein focus on understanding what controls the detachment and migration of oceanic crustal slices along subduction zones. We provide evidence for the coeval Middle to Late Cretaceous exhumation of oceanic blueschists in the same Neotethyan subduction zone, across more than 3000 km, from depths around 30-40 km, over a short time interval (similar to 25 Ma) compared to the duration of subduction (>100 Ma). We stress the importance of such a geodynamic process and suggest that this exhumation was promoted by a regional-scale change in the long-term interplate mechanical coupling. On the basis of geological and geophysical evidence, we propose that the upward migration of oceanic fragments in subduction zones is normally inhibited and only occurs discontinuously, as the subduction channel opens up in response to a major change in plate geodynamics, slab geometry and dynamics, mantle wedge and slab hydration, or a combination of these.
ISSN: 1525-2027

hal-00420898
https://hal.archives-ouvertes.fr/hal-00420898
DOI : 10.1029/2009GC002428

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The Cycladic Blueschist Unit (CBU) represents the northern passive margin of the Adria continental block and ophiolites that are the remnants of the Pindos Ocean, which were affected by high pressure-low temperature metamorphism in the blueschist and eclogite facies during the Eocene. Prior to the Lutetian, the ophiolitic and margin units were thrust towards the SW inside a NE-dipping subduction zone. Two subsequent exhumation stages are characterized by top-to-the-NE senses of shear: i) from mantle depths to lower crustal levels, before 37 Ma, which was accommodated by an extensional inversion of the Vardar suture zone, and ii) from deep crustal levels to the near-surface, between 30 and 20 Ma, which was accommodated by the North Cycladic Detachment. It is during this late stage of ductile exhumation that the central Cyclades Core Complex was exhumed. Segmentation of the CBU by normal faults started at 12 Ma, as recorded by the low temperature thermochronometers, and was coeval with block rotation and folding with NS-trending axes, which were predominantly controlled by the Myrthes-Ikaria strike-slip fault in the centre of the Cyclades. A map restoration of the CBU geometry, prior to segmentation, has been carried out using available structural and paleomagnetic data. The restoration shows that, following the CBU exhumation from mantle depths to crustal levels, a single core complex was exhumed along a single NE dipping detachment.
ISSN: 0040-1951

insu-00672320
https://hal-insu.archives-ouvertes.fr/insu-00672320
DOI : 10.1016/j.tecto.2011.12.025

Éditeur(s) : Gauthier-Villars
Résumé : We report here our findings on the chemistry of methane, manganese and chloride dissolved in the interstitial water of the Barbados accretionary complex. The decollement separating the subduction plate from the accretionary wedge is geochemically characterized by high methane and manganese and low chloride concentrations relative to buried seawater. Sandstone layers occurring below the decollement and the compressive structures recording some of the earliest effects of offscraping are also characterized by similar anomalies. A fluid with the same characteristics is also found six kilometres to the east of the deformation front within the oceanic plate. High manganese concentration and low chlorinity also occur in the pore water of the offscraped sediment packages, but without associated anomalous methane concentrations. These results suggest that: Dewatering processes occur below the decollement in association with thermogenic methane production; Fluid with low chlorinity and high methane concentrations circulates mainly along the decollement, its propagation in the oceanic domain and along the main fracture zones being associated with these detachment surfaces; Diagenetic processes essentially control the dissolved manganese concentration and probably affect the methane content of the interstitial waters; The observations made in this paper illustrate advective processes in the front of an accretionary prism.
Oceanologica Acta (0399-1784) (Gauthier-Villars), 1991 , Vol. 14 , N. 1 , P. 33-49

Droits : info:eu-repo/semantics/openAccess
http://archimer.ifremer.fr/doc/00101/21262/18873.pdf
http://archimer.ifremer.fr/doc/00101/21262/

Éditeur(s) : HAL CCSD
Résumé : The Deep Basin of the Gulf of Mexico (DBGM) extends over eastern Mexico, the southeastern part of the United States, west of the Atlantic Ocean. This study, based on the interpretation and integration of seismic profiles, exploration wells and outcrop studies, focus on the deep part of the Gulf of Mexico, where bathymetry varies from 200 to 3750 m, thus comprising both the continental slope and the abyssal plain. The first part of this thesis focus on the description of the sedimentary infill of the western part of the Gulf of Mexico, in the Veracruz State, and to its geodynamic controls. The geodynamic evolution of the Deep Basin of the Gulf of Mexico (DBGM) begins during the Triassic-Jurassic with the break-up and the opening of a continental rift, in the southern part of the North American lithospheric plate. This opening induced a relative movement of the Yucatan Block towards the southeast. This intra-continental rifting episode was followed by a stage of post-rift thermal subsidence in the basins of the continental margin in the west, coeval with oceanic accretion in the DBGM. The thermal subsidence of the margin was subsequently modified by the Laramian orogeny, which impacted strongly the overall architecture of the margin as well as its litho-stratigraphic evolution, inducing the deposition of siliciclastic deposits in various morphotectonic provinces: i.e., near the tectonic front of the Sierra Madre Oriental (SMO), within the adjacent Chicontepec foreland basin, over the Tuxpan Platform (Golden Lane), across the continental slope and up to the deep abyssal plain, these two last morphotectonic provinces belonging to the DBGM. During the Early Paleogene, the effects of the thermal subsidence of the passive margin were stressed by the tectonic load of the Laramian orogen (i.e., the Sierra Madre Oriental, SMO), thus allowing the development of a foreland basin flexural. In this geodynamic framework, the main sedimentary transfers developed from the tectonic front "SMO" in the west, towards the DBGM in the east, the main source for clastic sediments being linked to the erosion of the "SMO" mountains. During the Paleocene and the Early Eocene, the architecture of the silici-clastic syn-tectonic sediments deposited in submarine fans was characterized by sliding, turbidites with A and B Bouma facies, as well as levees and channels. After the stop of the flexural subsidence, the thermal subsidence of the passive margin resumed during the Late Eocene, the Oligocene and the Neogene, allowing the development of a new sedimentary prism, prograding eastwards toward the DBGM. This sedimentary infill was again made up of levees-channels, sand bars and delta systems. During the Neogene, an extensional system with listric faults and roll-over features developed across the slope of the DBGM, due to an active detachment developing within overpressured Eocene-Oligocene clays. This gravitational gliding of Neogene series accounted also for the development of compressional features at the toe of the slope. Approximately 60% of the Miocene siliciclastic sediments have been trapped in growth strata and slope basins associated with this complex gravitational system, ranging from river-delta features towards gravity slides associated with slump facies. The second part of this thesis aims at a quantification of these various processes, including the construction of balanced cross sections, forward Thrustpack kinematic modelling coupling the development of a basal detachment, lithospheric flexure, erosion and sedimentation, as well as subsequent stratigraphic modelling with the Dionisos software, the later aiming at predicting the sand versus clay ratios in Neogene siliciclastic deposits of the DBGM and its surroundings.
Le bassin profond du Golfe du Mexique (BPMG) est localisé à l'est du Mexique, au sud-est des États-Unis et à l'ouest de l'Océan Atlantique. Cette étude de la partie profonde du Golfe du Mexique est basée sur l'intégration de données de sismique, de forages pétroliers et d'études de terrain; elle comprend toute la pente continentale et la plaine abyssale, avec une bathymétrie qui varie de 200 à 3750 m. La première partie de cette thèse est consacrée à la description du remplissage sédimentaire de la bordure occidentale du Golfe du Mexique, dans le secteur de Veracruz, en liaison avec son évolution géodynamique. L'évolution géodynamique du BPMG commence au Trias-Jurassique avec la rupture et la propagation d'un rift continental, dans le secteur sud de la plaque nord américaine. Cette ouverture et le déplacement relatif vers le sud-est du bloc crustal du Yucatan sont à l'origine du BPGM. Cette géodynamique de rift continental est suivie d'une étape post-rift accompagnée de l'océanisation du bassin. Les bassins de la marge passive ont poursuivi leur évolution sous l'effet de la subsidence thermique à l'ouest du Golfe du Mexique, tandis que de la croûte océanique se formait dans le BPGM. Cette subsidence thermique de la marge a ensuite été perturbée par l'orogénèse Laramienne, qui a remodelé l'architecture stratigraphique silico-clastique des dépôts du Tertiaire entre les éléments morphotectoniques suivants: lefront tectonique de la Sierra Madre Orientale (SMO), le bassin d'avant-pays Chicontepec, la Plateforme de Tuxpan-Faja de Oro, la pente continentale et la plaine abyssale, ces deux dernières provinces morphotectoniques appartenant au BPGM. Pendant le Paléogèneinférieur, les effets de la subsidence thermique de la marge passive ont été accentués par la charge tectonique de l'orogénèse laramienne (SMO), permettant ainsi le développement d'un bassin flexural d'avant-pays. Au cours de cette étape, les principaux transferts sédimentaires se sont effectués du front tectonique "SMO" vers le BPGM. La source principale de sédiments clastiques est liée à l'érosion de la chaîne de montagnes "SMO". Pendant le Paléocène et l'Éocène inférieur, l'architecture des premiers sédiments silico-clastiques syn-tectoniques déposés dans des éventails sous-marins sont caractérisés par des figures de glissement, des faciès turbiditiques A et B de Bouma, des chenaux-levées. Après l'arrêt de la subsidence flexurale, la subsidence thermique de la marge passive s'est poursuivie pendant l'Éocène supérieur, l'Oligocène et le Néogène, permettant le développement d'un nouveau prisme sédimentaire progradant. Les remplissages sédimentaires sont encore constitués de chenaux et de levées, avec des barres de sable associées à des systèmes deltaïques sur la plateforme. Pendant le Néogène, un système de failles listriques s'est développé sur la pente du BPGM, au-dessus d'une surface de décollement située, dans la région d'étude, dans les argiles de l'Éocène-Oligocène. Ce système de failles de croissance a piégé plus de 60% des sédiments silico-clastiques du Miocène. Ce remplissage sédimentaire évolue latéralement de faciès fluviaux deltaïques vers des faciès de pente affectés de glissements gravitaires et associés à des turbidites. La deuxième partie de cette thèse est consacrée à une approche quantitative basée sur des modélisations structurales (coupes équilibrées et modélisations cinématiques directes avec Thrustpack, couplant décollement gravitaire, flexure lithosphérique, érosion et sédimentation), puis sédimentaires (prise en compte des transferts de matériel clastique depuis la partie émergée de la chaîne jusqu'au bassin profond, à l'aide du logiciel Dionisos, afin de mieux comprendre les processus de piégeage des sédiments grossiers dans les structures de croissance et les bassins perchés de la marge.
https://tel.archives-ouvertes.fr/tel-00435120

tel-00435120
https://tel.archives-ouvertes.fr/tel-00435120
https://tel.archives-ouvertes.fr/tel-00435120/document
https://tel.archives-ouvertes.fr/tel-00435120/file/thesealzaga.pdf

Éditeur(s) : HAL CCSD AGU and the Geochemical Society
Résumé : International audience
Rainbow is a dome-shaped massif at the 36°14′N nontransform offset along the Mid-Atlantic Ridge. It hosts three ultramafic-hosted hydrothermal sites: Rainbow is active and high temperature; Clamstone and Ghost City are fossil and low temperature. The MoMARDREAM cruises (2007, 2008) presented here provided extensive rock sampling throughout the massif that constrains the geological setting of hydrothermal activity. The lithology is heterogeneous with abundant serpentinites surrounding gabbros, troctolites, chromitites, plagiogranites, and basalts. We propose that a W dipping detachment fault, now inactive, uplifted the massif and exhumed these deep-seated rocks. Present-day deformation is accommodated by SSW-NNE faults and fissures, consistent with oblique teleseismic focal mechanisms and stress rotation across the discontinuity. Faults localize fluid flow and control the location of fossil and active hydrothermal fields that appear to be ephemeral and lacking in spatiotemporal progression. Markers of high-temperature hydrothermal activity (∼350°C) are restricted to some samples from the active field while a more diffuse, lower temperature hydrothermal activity (<220°C) is inferred at various locations through anomalously high As, Sb, and Pb contents, attributed to element incorporation in serpentines or microscale-sulfide precipitation. Petrographic and geochemical analyses show that the dominant basement alteration is pervasive peridotite serpentinization at ∼160–260°C, attributed to fluids chemically similar to those venting at Rainbow, and controlled by concomitant alteration of mafic-ultramafic units at depth. Rainbow provides a model for fluid circulation, possibly applicable to hydrothermalism at oceanic detachments elsewhere, where both low-temperature serpentinization and magmatic-driven high-temperature outflow develop contemporaneously, channeled by faults in the footwall and not along the detachment fault.
ISSN: 1525-2027

hal-01115281
https://hal.archives-ouvertes.fr/hal-01115281
https://hal.archives-ouvertes.fr/hal-01115281/document
https://hal.archives-ouvertes.fr/hal-01115281/file/Andreani_et_al-2014-Geochemistry%2C_Geophysics%2C_Geosystems.pdf
DOI : 10.1002/2014GC005269

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
Expeditions 304 and 305 of the Integrated Ocean Drilling Program cored and logged a 1.4 km section of the domal core of Atlantis Massif. Postdrilling research results summarized here constrain the structure and lithology of the Central Dome of this oceanic core complex. The dominantly gabbroic sequence recovered contrasts with predrilling predictions; application of the ground truth in subsequent geophysical processing has produced self-consistent models for the Central Dome. The presence of many thin interfingered petrologic units indicates that the intrusions forming the domal core were emplaced over a minimum of 100-220 kyr, and not as a single magma pulse. Isotopic and mineralogical alteration is intense in the upper 100 m but decreases in intensity with depth. Below 800 m, alteration is restricted to narrow zones surrounding faults, veins, igneous contacts, and to an interval of locally intense serpentinization in olivine-rich troctolite. Hydration of the lithosphere occurred over the complete range of temperature conditions from granulite to zeolite facies, but was predominantly in the amphibolite and greenschist range. Deformation of the sequence was remarkably localized, despite paleomagnetic indications that the dome has undergone at least 45 degrees rotation, presumably during unroofing via detachment faulting. Both the deformation pattern and the lithology contrast with what is known from seafloor studies on the adjacent Southern Ridge of the massif. There, the detachment capping the domal core deformed a 100 m thick zone and serpentinized peridotite comprises similar to 70% of recovered samples. We develop a working model of the evolution of Atlantis Massif over the past 2 Myr, outlining several stages that could explain the observed similarities and differences between the Central Dome and the Southern Ridge.
ISSN: 0148-0227

hal-00617528
https://hal.archives-ouvertes.fr/hal-00617528
https://hal.archives-ouvertes.fr/hal-00617528/document
https://hal.archives-ouvertes.fr/hal-00617528/file/2010JB007931.pdf
DOI : 10.1029/2010JB007931

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Miocene (17-11 Ma) magmatic activity in the Kabylies emplaced K-rich (and minor medium-K) calc-alkaline plutonic and volcanic rocks in five zones, delineating a ∼450 km long EW trending strip located along the northern coast of Algeria, between Annaba and Algiers. Their most likely source is the Kabylian subcontinental lithospheric mantle previously metasomatized during the Paleogene subduction of the Tethys oceanic lithosphere. Our preferred tectono-magmatic model involves a Tethyan slab detachment combined with African mantle delamination and crustal stacking, leading to the superimposition of the African continental crust over the Kabylian metasomatized lithospheric mantle. At ca. 17 Ma, the asthenospheric upwelling arising from lithospheric delamination and Tethyan slab tear triggered the thermal erosion of the latter mantle, inducing its partial melting. The corresponding mafic medium-K calc-alkaline magmas interacted with the African basement units during their ascent, generating intermediate to felsic K-rich calc-alkaline melts that display a characteristic trace element and isotopic crustal signature. Later on, slab tears propagated eastward and westward, promoting slab rollback perpendicular to plate convergence and inducing the emplacement of magmatic rocks of decreasing ages from central-eastern Algeria towards Tunisia and Morocco.
ISSN: 0899-5362

hal-01467997
https://hal.archives-ouvertes.fr/hal-01467997
DOI : 10.1016/j.jafrearsci.2016.10.005

Éditeur(s) : American Geophysical Union
Résumé : We use seismic reflection and rock sample data to propose that the first-order physiography of New Caledonia Trough and Norfolk Ridge formed in Eocene and Oligocene time and was associated with the onset of subduction and back-arc spreading at the Australia-Pacific plate boundary. Our tectonic model involves an initial Cretaceous rift that is strongly modified by Cenozoic subduction initiation. Hence, we are able to explain (1) complex sedimentary basins of inferred Mesozoic age; (2) a prominent unconformity and onlap surface of middle Eocene to early Miocene age at the base of flat-lying sediments beneath the axis of New Caledonia Trough; (3) gently dipping, variable thickness, and locally deformed Late Cretaceous strata along the margins of the trough; (4) platform morphology and unconformities on either side of the trough that indicate a phase of late Eocene to early Miocene uplift to near sea level, followed by rapid Oligocene and Miocene subsidence of similar to 1100-1800 m; and (5) seismic reflection facies tied to boreholes that suggest absolute tectonic subsidence at the southern end of New Caledonia Trough by 1800-2200 m since Eocene time. The Cenozoic part of the model involves delamination and subduction initiation followed by rapid foundering and rollback of the slab. This created a deep (>2 km) enclosed oceanic trough, similar to 2000 km long and 200-300 km across, in Eocene and Oligocene time as the lower crust detached, with simultaneous uplift and local land development along basin flanks. Disruption of Late Cretaceous and Paleogene strata was minimal during this Cenozoic phase and involved only subtle tilting and local reverse faulting or folding. Basin formation was possible through the action of at least one detachment fault that allowed the lower crust to either be subducted into the mantle or exhumed eastward into Norfolk Basin. We suggest that delamination of the lithosphere, with possible mixing of the lower crust back into the mantle, is more widespread than previously thought and may be commonly associated with subduction initiation, such as Cenozoic events in the Mediterranean and western Pacific.
Tectonics (0278-7407) (American Geophysical Union), 2010-03 , Vol. 29 , N. TC2004 , P. 1-16

Droits : Copyright 2010 by the American Geophysical Union.
http://archimer.ifremer.fr/doc/00001/11271/9283.pdf
DOI:10.1029/2009TC002476
http://archimer.ifremer.fr/doc/00001/11271/

Éditeur(s) : HAL CCSD
Résumé : The northern Mirdita ophiolite massifs in Albanian Dinarides formed at a slow-spreading ridge, active during the Jurassic (160–165 Ma). They share a common horizontal Jurassic–Lower Cretaceous sedimentary cover showing that they were not deeply and intrinsically affected by later Alpine thrusting. The western massifs of Mirdita, first oceanic core complex (OCC) and detachment shear zone described in ophiolites, compare with OCCs in slow-spreading ridges and provide continuous exposure of the deep internal structure of this system, revealing its kinematics, thanks to detailed structural mapping in peridotites and gabbros. The Mirdita detachments root in the Moho transition zone (MTZ), a weak zone at the top of asthenospheric mantle, where basaltic melts impregnate dunites. The OCC domes are plagioclase-amphibole–bearing mylonitic peridotites, ∼400 m thick, grading downward within 200 m to harzburgitic mantle. The mylonitic detachments crossed Moho beneath a NNE-SSW–trending ridge. On the western side of OCC domes, the hanging wall of the ridge, crustal gabbros, and basalts are still preserved, despite being deeply affected by hydrothermal alteration. From there, the partially molten MTZ was detached as a shear zone, mixing with lower gabbros. The OCC emerged, migrating upsection and eastward over 5 km. Finally, the OCC front is observed in hornblende-rich syntectonic mylonites derived from upper gabbros and from the overlying former lid. Serpentinization is static within these mylonites. A low-temperature detachment fault is expressed as a sheared antigoritic mélange at the margin of the mylonitic shear zone. Asthenospheric flow in the harzburgitic mantle beneath the ridge of origin has been preserved below the OCC rooting. The dominant asthenospheric flow direction trends parallel to the ridge axis. This mantle flow rotates over 200 m into the low-temperature mylonitic detachments, where OCC motion turns transversal to the ridge. Crystal preferred orientation measurements on six samples point to brown hornblende crystal growth during mylonitic flow and illustrate the change of olivine intra-crystalline slip system in mylonites compared to porphyroclastic harzburgite.
ISSN: 1553-040X

hal-01504440
https://hal.archives-ouvertes.fr/hal-01504440
DOI : 10.1130/GES01383.1

Éditeur(s) : HAL CCSD American Geophysical Union (AGU)
Résumé : International audience
The Calabro-Peloritan belt constitutes the eastward termination of the southern segment of the Alpine Mediterranean belt. This orogenic system was built up during the convergence between the Eurasian and the African plates, roughly directed North-South since the Upper Cretaceous. It was subsequently fragmented during the opening of the Western Mediterranean basins since Oligocene times. The curved shape of the Calabro-Peloritan belt was acquired during the opening of the Tyrrhenian basin since Tortonian. The origin, kinematics and significance of the Calabro-Peloritan tectonic pile are still debated. Our data in the Aspromonte Massif of Southern Calabria reveal an Alpine history marked by two main superimposed kinematic regimes. (i) A first phase corresponds to the piling up of basement nappes with a top-to-the-SE vergence, i.e in a direction orthogonal to the belt trend and towards the Adriatic foreland. This external vergence is similar to what is observed in both Northeastern Sicily and Northern Calabria. In Sicily, the age of nappe piling is Alpine, as evidenced by pinched slices of Mesozoïc sediments. In the Aspromonte Massif, thrusting age is less constrained. Our data suggest remnants of late Hercynian structuration before the Alpine stacking. (ii) A second phase corresponds to the thinning of the continental crust, dated at around 30 Ma by both geochronological and stratigraphical data. This extension is mainly localized on two low-angle detachment contacts, with top-to-the-NE displacement. The lower one corresponds to the reworking of the former main nappe contact. The upper one is a large detachment fault cutting across the pile from upper sedimentary levels down to metamorphic basement. Extension of similar Alpine age and similar internal vergence has been already recognized in other parts of the Calabro-Peloritan Arc: in the basement nappes of Northeastern Sicily and in the ophiolitic units of Northern Calabria. Coming back to the original geometry and position of the Calabro-Peloritan belt, before its bending and the opening of the Liguro-Provençal and Tyrrhenian basins, we evidence a homogeneous Oligocene NE-SW extension all along the Calabro-Peloritan segment of the Alpine Mediterranean belt. This tectonometamorphic history is best explained within the framework of the continuous Tertiary westward dipping subduction of the Tethyan oceanic domain below the European active margin and the progressive eastward retreat of the Apennine trench since Oligocene times.
ISSN: 0278-7407

hal-00283182
https://hal.archives-ouvertes.fr/hal-00283182
https://hal.archives-ouvertes.fr/hal-00283182/document
https://hal.archives-ouvertes.fr/hal-00283182/file/Heymes_et_al_2008.pdf
DOI : 10.1029/2007TC002157

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The analysis of field relationships between allochthonous crystalline slivers, ultramafic units and associated sedimentary cover in the high-pressure Schistes Lustrés units of northern Corsica allows reconstruction of the pre-orogenic architecture of a fossil Mesozoic Ocean-Continent Transition (OCT) of the Tethys basin. The studied area, encompassing the Serra di Pigno and Col de Téghime areas (Cap Corse) is composed of an assemblage of prealpine basement sheets made up of serpentinized mantle rocks, Permian gabbros and gneisses, locally associated with Paleozoic metabasites and micaschists. The sedimentary cover includes numerous intervals of calc-schists, marbles, quartzites, micaschists and dolomitic metabreccias yielding a great variety of lithostratigraphical successions. The metasedimentary sequences do not show affinities with the typical cover series of the Prépiémontais margin domains. This implies an origin from a more internal domain (oceanward) for the studied units. In addition, the sedimentary cover of the ultramafic basement units do not display the characters of the classical Alpine ophiolites but bear lithological features showing affinities with both continental and oceanic environments. We assume that the high variability of the sedimentary successions as well as the presence of a basement composed of continental and upper-mantle rocks is consistent with an origin at an OCT. The acidic basement slivers are regarded as former extensional allochthons of continental crust abandoned during breakup on a newly exhumed seafloor of peridotite composition. Such extensional allochthons, will then logically constitute the most internal continental slices buried at great depth during Alpine subduction. This work shows that a lot has to be expected from a revision of the Schistes Lustrés lithostratigraphy in the light of the new concepts of the evolution of the OCT domains.
ISSN: 0040-1951

hal-00795578
https://hal.archives-ouvertes.fr/hal-00795578
DOI : 10.1016/j.tecto.2012.06.013

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The Parentis and Arzacq-Mauleon basins located in front of the V-shaped oceanic propagator in the Bay of Biscay present evidence for extreme crustal thinning. In this paper we investigate the 3D structure of these rift basins, based on field observations and the interpretation of seismic data. We compare these results with those obtained from two different and independent inversion methods: first a 3D gravity inversion and second the standard Euler deconvolution.;For the Mauleon Basin our results show that the positive gravimetric anomaly identified above its southern margin is the consequence of two shallower high density bodies that are separated by the Pamplona fault and a deeper high density body. The high density bodies can be explained by the presence of mid-crustal and mantle rocks that were exhumed or uplifted at shallower depth during Early Cretaceous rifting before they were reworked and integrated to the Pyrenean chain during compression phase. Also, during this reactivation phase, some slices of the exhumed mid-crustal and mantle rocks were sheared off and were integrated in the present-day thrust belt in the Mauleon basin. For the Parentis Basin we can demonstrate, based on seismic data and gravimetric inversion methods, a decrease in extension from west to east, which is compatible with the V-shape geometry of the overall basin. Along strike, a change in the fault geometry from downward concave top-basement detachment faults to upward concave high-angle faults can be observed eastwards, i.e. towards the termination of the basin. A key structure, controlling the evolution of the Parentis Basin, is the east-west trending Ibis fault. We interpret this fault to have initially formed as a strike slip fault before it was reactivated during later crustal thinning. At present, it forms the limit between an upper plate sag basin to the north and a lower plate sag basin, floored at least locally by a top-basement detachment faults to the south. The strong asymmetry of the basin is supported by the shape of the basin and the results of standard Euler deconvolution.
ISSN: 0040-1951

hal-00523444
https://hal.archives-ouvertes.fr/hal-00523444
DOI : 10.1016/j.tecto.2010.04.023

Éditeur(s) : Springer
Résumé : Series of sensitivity tests were performed with a z-coordinate, global eddy-permitting (1/4 degrees) ocean/sea-ice model (the ORCA-R025 model configuration developed for the DRAKKAR project) to carefully evaluate the impact of recent state-of-the-art numerical schemes on model solutions. The combination of an energy-enstrophy conserving (EEN) scheme for momentum advection with a partial step (PS) representation of the bottom topography yields significant improvements in the mean circulation. Well known biases in the representation of western boundary currents, such as in the Atlantic the detachment of the Gulf Stream, the path of the North Atlantic Current, the location of the Confluence, and the strength of the Zapiola Eddy in the south Atlantic, are partly corrected. Similar improvements are found in the Pacific, Indian, and Southern Oceans, and characteristics of the mean flow are generally much closer to observations. Comparisons with other state-of-the-art models show that the ORCA-R025 configuration generally performs better at similar resolution. In addition, the model solution is often comparable to solutions obtained at 1/6 or 1/10 degrees resolution in some aspects concerning mean flow patterns and distribution of eddy kinetic energy. Although the reasons for these improvements are not analyzed in detail in this paper, evidence is shown that the combination of EEN with PS reduces numerical noise near the bottom, which is likely to affect current-topography interactions in a systematic way. We conclude that significant corrections of the mean biases presently seen in general circulation model solutions at eddy-permitting resolution can still be expected from the development of numerical methods, which represent an alternative to increasing resolution.
Ocean Dynamics (1616-7341) (Springer), 2006-12 , Vol. 56 , N. 5-6 , P. 543-567

Droits : © Springer 2006. Part of Springer Science+Business Media
http://archimer.ifremer.fr/doc/2006/publication-3514.pdf
DOI:10.1007/s10236-006-0082-1
http://archimer.ifremer.fr/doc/00000/3514/

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Deep crustal and mantle rocks are exhumed in core complex mode of extension in three types of structures: metamorphic core complexes, oceanic core complexes and magma poor passive margins. Using available analogue and numerical models and their comparison with natural examples, the present paper reviews the mechanical processes involved in these different types of extensional setting. Three main aspects are considered: i) the primary role of lithosphere rheology, ii) the lithosphere-scale patterns of progressive deformation that lead to the exhumation of deep metamorphic or mantle rocks and iii) the initiation and development of detachment zones. Crustal core complexes develop in continental lithospheres whose Moho temperature is higher than 750 °C with “upper crust-dominated” strength profiles. Contrary to what is commonly believed, it is argued from analogue and numerical models that detachments that accommodate exhumation of core complexes do not initiate at the onset of extension but in the course of progressive extension when the exhuming ductile crust reaches the surface. In models, convex upward detachments result from a rolling hinge process. Mantle core complexes develop in either the oceanic lithosphere, at slow and ultra-slow spreading ridges, or in continental lithospheres, whose initial Moho temperature is lower than 750 °C, with “sub-Moho mantle-dominated” strength profiles. It is argued that the mechanism of mantle exhumation at passive margins is a nearly symmetrical necking process at lithosphere scale without major and permanent detachment, except if strong strain localization could occur in the lithosphere mantle. Distributed crustal extension, by upper crust faulting above a décollement along the ductile crust increases toward the rift axis up to crustal breakup. Mantle rocks exhume in the zone of crustal breakup accommodated by conjugate mantle shear zones that migrate with the rift axis, during increasing extension.
ISSN: 0040-1951

insu-01610186
https://hal-insu.archives-ouvertes.fr/insu-01610186
https://hal-insu.archives-ouvertes.fr/insu-01610186/document
https://hal-insu.archives-ouvertes.fr/insu-01610186/file/brun-tect-2017.pdf
DOI : 10.1016/j.tecto.2017.09.017

Éditeur(s) : Amer Geophysical Union
Résumé : Recent ROV dives and high-resolution bathymetric data acquired over the Ashadze fields on the Mid-Atlantic Ridge (13 degrees N) allow us to derive constraints on the regional and local geological setting of ultramafic-hosted hydrothermal fields. The active vent fields of Ashadze hydrothermal fields are located in the western axial valley wall, downslope from the termination of a prominent corrugated surface and in a transitional domain with respect to ridge segmentation. The study of the shipboard and ROV bathymetry shows that decameter (100 m by 60 m) to kilometer-scaled rockslides shape the axial valley wall slopes in this region. The Ashadze 1 vent field occurs on a coherent granular landslide rock mass that is elongated in an E-W direction. The Ashadze 1 vent field comprises hundreds of active and inactive sulfide chimneys. The Ashadze 2 vent field is located in a NNE-trending linear depression which separates outcrops of gabbros and serpentinized peridotites. Active black smokers in the Ashadze 2 field are located on ultramafic substratum in a 40-m diameter crater, 5-m deep. This crater recalls similar structures described at some vents of the Logatchev hydrothermal field (Mid-Atlantic Ridge 15 degrees N). We discuss the mode of formation for these craters, as well as that for a breadcrust-like array of radial fissures identified at Ashadze 1. We propose that hydrothermalism at Ashadze can be an explosive phenomena associated with geyser-like explosions. Our study also constrains the geological and geophysical context of the ultramafic-hosted Ashadze hydrothermal system that may use the oceanic detachment fault as a preferred permeability conduit.
Geochemistry Geophysics Geosystems (1525-2027) (Amer Geophysical Union), 2012-11 , Vol. 13 , N. 1 , P. Q0AG14

Droits : 2012. American Geophysical Union. All Rights Reserved.
http://archimer.ifremer.fr/doc/00111/22223/19895.pdf
DOI:10.1029/2012GC004433
http://archimer.ifremer.fr/doc/00111/22223/