Éditeur(s) : Gauthier-Villars
Résumé : Since the advent of plate tectonics the active margins of the oceans have been studied according to a model whose basis is a piling up of imbrications of oceanic material units, in front of the upper plate, forming a great tectonic accretionary prism. This model is broadly the same for all the authors; it has been largely used for alpine-type or paleo-oceanic mountain chain, all around the world. The authors have directly taken part in the drillings on western and eastern Pacific active margins (Legs 60 and 67) and they have worked on the tectonics of alpine (paleo-oceanic) chains of the peri-mediterranean, peri-caribbean, and peripacific belts. They compare the geological data acumulated from these tow direct sources. The tectonic constraints constraints regime is specified and the consequences of the subduction are looked for. The notions of collison and obduction are discussed in relation to subduction and tectonics. Finally, an anlaysis of the temporal evolution of active margins and of chains, shows the necessity of thinking in terms of superimposed tectonics.
Oceanologica Acta, Special issue (0399-1784) (Gauthier-Villars), 1981

Droits : info:eu-repo/semantics/openAccess
http://archimer.ifremer.fr/doc/00246/35700/34207.pdf
http://archimer.ifremer.fr/doc/00246/35700/

Éditeur(s) : HAL CCSD Nature Publishing Group
Résumé : International audience
Collisional mountain belts grow as a consequence of continental plate convergence and eventuallydisappear under the combined effects of gravitational collapse and erosion. Using a decade ofGPS data, we show that the western Alps are currently characterized by zero horizontal velocityboundary conditions, offering the opportunity to investigate orogen evolution at the time ofcessation of plate convergence. We find no significant horizontal motion within the belt, but GPS andlevelling measurements independently show a regional pattern of uplift reaching ~2.5 mm/yr in thenorthwestern Alps. Unless a low viscosity crustal root under the northwestern Alps locally enhancesthe vertical response to surface unloading, the summed effects of isostatic responses to erosion andglaciation explain at most 60% of the observed uplift rates. Rock-uplift rates corrected from transientglacial isostatic adjustment contributions likely exceed erosion rates in the northwestern Alps. In theabsence of active convergence, the observed surface uplift must result from deep-seated processes.
ISSN: 2045-2322

hal-01357450
https://hal.archives-ouvertes.fr/hal-01357450
https://hal.archives-ouvertes.fr/hal-01357450/document
https://hal.archives-ouvertes.fr/hal-01357450/file/noquet2016.pdf
DOI : 10.1038/srep28404

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Tethyan ophiolites show an apparent poorly organized association of ultramafic andmafic rocks. By contrast tothe complete mantle-crustal sections of Semail-type ophiolite sheets, Tethyan ophiolites are characterized by asmaller amount of mafic rocks (gabbros and basalts), by the absence of any sheeted dyke complex and by thefrequent occurrence of oceanic sediments stratigraphically overlying mantle-derived peridotites and associatedgabbroic intrusions. Therefore, they are considered as typical remnants of oceanic lithosphere formed in slowspreadingenvironment or in ocean–continent transition at distal passive margins. In the very first models offormation of the Tethyan ophiolites, in the years 1980, the geodynamical processes leading to mantle unroofingwere poorly understood due to the paucity of data and concepts available at that time from the present-dayoceans. In particular, at that time, little work had focused on the distribution, origin and significance ofmafic rocks with respect to the dominant surrounding ultramafics. Here, we reconsider the geology of sometypical metaophiolites from the Western Alps and Corsica, and we show how results from the past decadeobtained in the current oceans ask for reassessing the significance of the Tethyan ophiolites in general. Revisitedexamples include a set of representative metaophiolites from the blueschists units of the Western Alps (Queyrasregion) and from Alpine Corsica (Golo Valley). Field relationships between the ophiolitic basement andthe metasedimentary/metavolcanic oceanic cover are described, outlining a typical character of the Tethyanophiolite lithological associations. Jurassic marbles and polymictic ophiolite metabreccias are unconformablyoverlying the mantle-gabbo basement, in a way strictly similar to what is observed in the non-metamorphicAppennine ophiolites or Chenaillet massif. This confirms that very early tectonic juxtaposition of ultramafic andmafic rocks occurred in the oceanic domain before subduction. This juxtaposition resulted from tectonic activitythat is now assigned to the development of detachment faults and to the formation of Oceanic Core Complexes(OCCs) at the axis of slow spreading ridges. This fundamental Plate Tectonics process is responsible for the exhumationand for the axial denudation of mantle rocks and gabbros at diverging plate boundaries. In addition, fieldrelationships between the discontinuous basaltic formations and the ultramafic–mafic basement indicate that thistectonic stage is followed or not by a volcanic stage.We discuss this issue in the light of available field constraints.
ISSN: 0012-8252

insu-01096467
https://hal-insu.archives-ouvertes.fr/insu-01096467
https://hal-insu.archives-ouvertes.fr/insu-01096467/document
https://hal-insu.archives-ouvertes.fr/insu-01096467/file/Lagabrielle-EarthSciRev-2014.pdf
DOI : 10.1016/j.earscirev.2014.11.004

Éditeur(s) : HAL CCSD Société géologique de France
Résumé : The mechanical equilibrium of an orogenic wedge is maintained thanks to interactions between tectonic processes and surface processes. To better constrain the influence of erosion and sedimentation on the evolution of orogens, we performed a series of analogue models based on the tapered wedge principle, varying the amounts of erosion and sedimentation. The models develop by frontal accretion in the foreland basin and by simple underthrusting and subsequent underplating in the hinterland. The variations in rates of erosion and sedimentation strongly modify the extent, the morphology, the structures, the timing of development and the material paths in the different models. Under certain conditions, entire structural units can be formed and subsequently eroded out of the geological record, leading to important underestimations when restoring sections. Particles located in the converging lower-plate or in the upper-plate show complex uplift paths related to tectonic stages. The correlation between models and three Alpine tectonic cross-sections emphasizes the role of erosion and sedimentation on the dynamics and development of the orogen and adjacent Molasse basin. Along strike changes in the present structure of the orogen could be explained in part by differences in surface processes.
EISSN: 1777-5817

hal-00411140
https://hal.archives-ouvertes.fr/hal-00411140
DOI : 10.2113/gssgfbull.3.297

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
This study provides new Ar-40/Ar-39 geochronological constraints on the age of the Alpine tectonics in the Aspromonte Massif (southern part of the Calabrian-Peloritan belt). This massif exposes the upper units of the Calabride Complex which originated from the European continental margin. The Calabride Complex was incorporated in the Alpine orogenic wedge and then integrated into the Apennines and Maghrebides fold- and-thrust belts. Throughout the Calabride Complex there is evidence for a two stage tectonic history, which remains however rather poorly dated: Alpine nappe stacking is followed by extensional reworking along the former thrust contacts or along new detachment surfaces. Our new ages suggest that exhumation of the uppermost units, which accompanied nappe stacking, probably started at 45 Ma and that the deepest units were almost completely exhumed at 33 Ma. This kinematics probably corresponds to syn-orogenic extension while the end of exhumation is clearly related to the extensional tectonics dated at 28.6 Ma along detachment structures.;Our geochronological data reveal a very short lag time between accretional and extensional processes in this part of the Mediterranean Alpine orogenic belt. The direction of extension, when the units are restored to their initial position (i.e. before the opening of the Western Mediterranean basins and the bending of the arc) is NNE-SSW. Such a direction does not fit with the eastward slab-retreat model generally put forward to explain extension in the Western Mediterranean. In contrast, we provide evidence for roughly N-S middle Oligocene extension in the accretionary prism, not previously described in this part of the Mediterranean domain.
ISSN: 0024-4937

hal-00475649
https://hal.archives-ouvertes.fr/hal-00475649
DOI : 10.1016/j.lithos.2009.10.011

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The Chenaillet Ophiolite in the Franco-Italian Alps represents a well-exposed ocean-floor sequence that was only weakly overprinted by Alpine metamorphism during its emplacement in the Alpine nappe stack. Pillow lavas showing a Mid Ocean Ridge Basalt (MORB) signature overlie tectonically exhumed gabbros and serpentinized mantle rocks similar to oceanic core complexes (OCC) described from present-day slow- to ultraslow-spreading ridges. Based on detailed mapping it can be shown that: 1) syn-magmatic high-temperature shear zones are truncated by oceanic detachment faults; 2) sediments consisting exclusively of clasts derived from the footwall of the detachment are overlain by voluminous lavas, and 3) emplacement of lavas is linked with high-angle faulting that overprint the oceanic detachment fault. Based on stratigraphic and cross cutting relationships we conclude that: 1) a complex relation between high- and low-temperature shear zones exists, 2) oceanic detachment faults may be obliterated by later emplaced of MOR basalts, and 3) high-angle faults may serve at shallow levels as feeder channels for the overlying pillow basalts. These observations raise questions about the relative relations in time and space between magmatic, hydrothermal and tectonic processes at spreading systems. We propose that the observed change from exhumation along an oceanic detachment fault to high-angle faulting associated with extrusion of volcanic rocks may represent an evolution within a life cycle of a spreading system that may be comparable to present-day slow- to ultraslow-spreading ridges.
ISSN: 0024-4937

hal-00617678
https://hal.archives-ouvertes.fr/hal-00617678
DOI : 10.1016/j.lithos.2010.10.017

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Alpine Corsica consists of a stack of variably metamorphosed units of continental and Tethys-derived rocks. It represents an excellent example of high-pressure (HP) orogenic belt, such as the Western Alps, exposed over a small and accessible area. Compared to the Western Alps, the geology of Alpine Corsica is poorly unraveled. During the 1970s-80s, based on either lithostratigraphic or metamorphic field observations, various classifications of the belt have been proposed, but these classifications have been rarely matched together. Furthermore, through time, the internal complexity of large domains has been progressively left aside in the frame of large-scale geodynamic reconstructions. As a consequence, major open questions on the internal structure of the belt have remained unsolved. Apart from a few local studies, Alpine Corsica has not benefited of modern developments in petrology and basin research. This feature results in several uncertainties when combining lithostratigraphic and metamorphic patterns and, consequently, in the definition of an exhaustive architecture of the belt. In this paper we provide a review on the geology of Alpine Corsica, paying particular attention to the available lithostratigraphic and metamorphic classifications of the metamorphic terranes. These data are completed by a new and exhaustive metamorphic dataset obtained by means of thermometry based on Raman Spectroscopy of Carbonaceous Material (RSCM). This technique provides reliable insights on the peak temperature of the metamorphic history for CM-bearing metasediments. A detailed metamorphic characterization of metasediments, which have been previously largely ignored due to retrogression or to the lack of diagnostic mineralogy, is thus obtained and fruitfully coupled with the available lithostratigraphic data. Nine main tectono-metamorphic units are defined, from subgreenschist (ca. 280-300 °C) to the lawsonite-eclogite-facies (ca. 500-550 °C) condition. These units are homogeneous in metamorphism, laterally continuous and have characteristic lithostratigraphic features. This study also suggests a direct link between the pre-orogenic extensional setting and the present-day compressional structure of Alpine Corsica, indicating that large sections of subducted lithosphere were subducted and exhumed as coherent domains. These features provide important insight on the mechanism of stacking and exhumation of HP rocks, and make Alpine Corsica a unique reference for mountain-building processes in Tethyan-type orogens.
ISSN: 0012-8252

hal-00814433
https://hal.archives-ouvertes.fr/hal-00814433
DOI : 10.1016/j.earscirev.2012.10.003

Éditeur(s) : HAL CCSD American Geophysical Union (AGU)
Résumé : International audience
The Calabro-Peloritan belt constitutes the eastward termination of the southern segment of the Alpine Mediterranean belt. This orogenic system was built up during the convergence between the Eurasian and the African plates, roughly directed North-South since the Upper Cretaceous. It was subsequently fragmented during the opening of the Western Mediterranean basins since Oligocene times. The curved shape of the Calabro-Peloritan belt was acquired during the opening of the Tyrrhenian basin since Tortonian. The origin, kinematics and significance of the Calabro-Peloritan tectonic pile are still debated. Our data in the Aspromonte Massif of Southern Calabria reveal an Alpine history marked by two main superimposed kinematic regimes. (i) A first phase corresponds to the piling up of basement nappes with a top-to-the-SE vergence, i.e in a direction orthogonal to the belt trend and towards the Adriatic foreland. This external vergence is similar to what is observed in both Northeastern Sicily and Northern Calabria. In Sicily, the age of nappe piling is Alpine, as evidenced by pinched slices of Mesozoïc sediments. In the Aspromonte Massif, thrusting age is less constrained. Our data suggest remnants of late Hercynian structuration before the Alpine stacking. (ii) A second phase corresponds to the thinning of the continental crust, dated at around 30 Ma by both geochronological and stratigraphical data. This extension is mainly localized on two low-angle detachment contacts, with top-to-the-NE displacement. The lower one corresponds to the reworking of the former main nappe contact. The upper one is a large detachment fault cutting across the pile from upper sedimentary levels down to metamorphic basement. Extension of similar Alpine age and similar internal vergence has been already recognized in other parts of the Calabro-Peloritan Arc: in the basement nappes of Northeastern Sicily and in the ophiolitic units of Northern Calabria. Coming back to the original geometry and position of the Calabro-Peloritan belt, before its bending and the opening of the Liguro-Provençal and Tyrrhenian basins, we evidence a homogeneous Oligocene NE-SW extension all along the Calabro-Peloritan segment of the Alpine Mediterranean belt. This tectonometamorphic history is best explained within the framework of the continuous Tertiary westward dipping subduction of the Tethyan oceanic domain below the European active margin and the progressive eastward retreat of the Apennine trench since Oligocene times.
ISSN: 0278-7407

hal-00283182
https://hal.archives-ouvertes.fr/hal-00283182
https://hal.archives-ouvertes.fr/hal-00283182/document
https://hal.archives-ouvertes.fr/hal-00283182/file/Heymes_et_al_2008.pdf
DOI : 10.1029/2007TC002157

Éditeur(s) : HAL CCSD
Résumé : International audience
The geology of the North Pyrenean Zone in the central Pyrenees allows for the observation in the field of theentire section of the Pyrenean rift, from the mantle to the crust and the Mesozoic cover (pre, syn and post rift).The good knowledge we have of the pre-Alpine history of the Pyrenees allows us to properly constrain the Alpinegeological evolution of the pre-Triassic rocks which record both Variscan and Alpine orogenic cycles.The mantle outcrop as kilometric to centimetric fragments of peridotite dispersed within a carbonate metamorphicbreccia. The study of peridotite serpentinisation shows several events of low-temperature serpentinisation, incontact with seawater. In some locallities, we can observe a mixture of fragments of variously serpentinizedperidotites. This suggests a tectonic context where fragments of peridotites from different structural levels weresampled more or less synchronously.The granulitic basement is characterized by a Variscan syndeformational HT event (300-280 Ma). So farwe have not found any trace of a Cretaceous HT event (> 500C). On the other hand, the basement is affectedby a regional metasomatism that began during the Jurassic and became more spatially focused with time until itwas restricted to the Pyrenean rift during the Aptien, Albian and Cenomanian. The talc-chlorite metasomatism(120-95 Ma) shows an evolution from a static toward a syn-deformation hydrothermal event, under a more or lessnormal geothermal gradient. Extensional deformation is recorded by the reworking of several inherited low-angleVariscan tectonic contacts, but also by dispersed high-angle extensional shear zones formed under greenshistconditions.The metamorphic Mesozoic cover of the basement massifs, which constitute the so-called Internal MetamorphicZone, is an allochtonous unit made of lenses of Mesozoic rocks enclosed into the breccia, whichlocally contains peridotite and basement clasts. The Mesozoic metamorphic carbonates show a first phase ofsyn-metamorphic (450-600C, P < 2 kb) ductile deformation, and subsequent phases of folding and fracturing.The datation of neoformed minerals give a 108-85 Ma time span for the metamorphism. We interpret this brecciaas an abandonment breccia which marks the emergence of the main detachment. The basal contact of the Mesozoiccover has a complex 3D geometry traced by Triassic evaporites. It corresponds to a major pre- and synorogenicpolyphased tectonic contact.All these data show a geometrically complex hyper-extended rift where the crust was not stretched under ahigh geothermal gradient but thinned by the tectonic extraction of relatively thin lenses and perhaps cut by highangle low-grade shear zones. The 3D geometry, as well as the strain records and the breccia lithologies stronglysuggest a non-cylindricity for the exhumation process, probably within a transtentional system
Geophysical Research Abstracts
Vienne, Austria

insu-01510371
https://hal-insu.archives-ouvertes.fr/insu-01510371

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Constraining mantle deformation beneath plate boundaries where plates interact with each other, such as beneath active or halted mountain belts, is a particularly important objective of "mantle tectonics" that may bring a depth extent to the Earth's surface observation. Such mantle deformation can be mapped at scale lengths of several tens of kilometers through the analysis of seismological data and particularly by mapping seismic anisotropy from the splitting analysis of vertically-propagating SKS waves that largely reflect the strain-induced crystal preferred orientations of the rock-forming minerals within the upper mantle. In the present study, we analyse data from approximately 50 broadband seismic stations covering the Western Alps and we provide a coherent picture of upper mantle anisotropy beneath the belt. The large-scale anisotropy pattern is characterized by fast split directions that closely follow the trend of the belt. Moreover, the maximum anisotropy magnitude is not located beneath the internal zones of the belt but instead beneath external units. All suggests that the anisotropy is likely dominated by sublithospheric mantle deformation. We propose that the observed anisotropy pattern can be explained by recent or active mantle flow around the Eurasian slab presently plunging beneath the inner parts of the Alps.
ISSN: 0012-821X

hal-00617828
https://hal.archives-ouvertes.fr/hal-00617828
https://hal.archives-ouvertes.fr/hal-00617828/document
https://hal.archives-ouvertes.fr/hal-00617828/file/Barruol_SKS_Alpes_EPSL2011_hal.pdf
DOI : 10.1016/j.epsl.2010.12.040

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The volume comprises some of the contributions presented during the 10th edition of the Alpine Meeting "CorseAlp 2011". It has been held in Saint Florent (Corsica) between 10th and 16th of April 2011 under the auspices of Societé Geologique de France, Società Geologica Italiana and the INGV (Istituto Nazionale di Geofisica e Vulcanologia) and with the collaboration of colleagues of Université de Corse (M.-M. Spella, M. and J. Ferrandini and L. Ciancaleoni) and the support of the city council of S. Florent. The meeting was framed in the series of "Alpine Workshops" e.g., Siegesmund et al. (2008), Handy and Rosenberg (2011), which are held every two years to develop interdisciplinary research on Alpine-type orogens. It hosted a variety of topical sessions from regional geology to process-oriented field and laboratory studies and gave the opportunity to collect multidisciplinary and multiscale approaches to geodynamic studies including continental rifting and ocean opening, oceanic and continental subduction, late- to post orogenic extension, exhumation of deep seated rocks, back-arc opening and microcontinent rotation, interfering orogenic-scale tectonics and surface processes, tectonics and seismic hazard within the Alpine chain and Mediterranean realms.
ISSN: 0040-1951

hal-00795580
https://hal.archives-ouvertes.fr/hal-00795580

Éditeur(s) : HAL CCSD American Geophysical Union (AGU)
Résumé : TECTO LITHO
On the basis of a section across the northwestern Alpine wedge and foreland basin, analogue modeling is used to investigate the impact of surface processes on the orogenic evolution. The basis model takes into account both structural and lithological heritages of the wedge. During shortening, erosion and sedimentation are performed to maintain a critical wedge. Frontal accretion leads to the development of a foreland thrust belt; underplating leads to the formation of an antiformal nappe stack in the internal zones. Important volumes of analogue materials are eroded out of the geological record, which in the case of the Alps suggests that the original lengths and volumes may be underestimated. The foreland basin evolves differently depending on the amounts of erosion/sedimentation. Its evolution and internal structuring is governed by the wedge mechanics, thought to be the main controlling mechanism in the development of the Molasse basin in a feedback interaction with surface processes.
ISSN: 0278-7407

hal-00404424
https://hal.archives-ouvertes.fr/hal-00404424
DOI : 10.1029/2006TC002048

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Slices of polycyclic metasediments (marbles and meta-cherts) are tectonically amalgamated with the polydeformed basement of the Dent Blanche tectonic system along a major Alpine shear zone in the Western Alps (Becca di Salé area, Valtournenche Valley). A combination of techniques (structural analysis at various scales, metamorphic petrology, geochronology and trace element geochemistry) was applied to determine the age and composition of accessory phases (titanite, allanite and zircon) and their relation to major minerals. The results are used to reconstruct the polyphase structural and metamorphic histories, comprising both pre-Alpine and Alpine cycles. The pre-Alpine evolution is associated with low-pressure high-temperature metamorphism related to Permo-Triassic lithospheric thinning. In meta-cherts, microtextural relations indicate coeval growth of allanite and garnet during this stage, at ~ 300 Ma. Textures of zircon also indicate crystallisation at HT conditions; ages scatter from 263 to 294 Ma, with a major cluster of data at ~ 276 Ma. In impure marble, U-Pb analyses of titanite domains (with variable Al and F contents) yield apparent 206Pb/238U dates range from Permian to Jurassic. Chemical and isotopic data suggest that titanite formed at Permian times and was then affected by (extension-related?) fluid circulation during the Triassic and Jurassic, which redistributed major elements (Al and F) and partially opened the U-Pb system. The Alpine cycle lead to early blueschist facies assemblages, which were partly overprinted under greenschist facies conditions. The strong Alpine compressional overprint disrupted the pre-Alpine structural imprint and/or reactivated earlier structures. The pre-Alpine metamorphic record, preserved in these slices of metasediments, reflects the onset of the Permo-Triassic lithospheric extension to Jurassic rifting.
ISSN: 0024-4937

hal-00758123
https://hal.archives-ouvertes.fr/hal-00758123
DOI : 10.1016/j.lithos.2012.05.007

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The Oisans Massif, located in the external zones of the western Alps, experienced significant shortening during the Alpine collision. While a series of major top-to-the west shear zones was recently described, the general low grade of the metamorphism has not attracted much petrological and geochronological studies. This paper provides combined temperature and age constraints on the evolution of the Oisans Massif. Temperature was estimated with the Raman Spectrometry of Carbonaceous Material (RSCM) method and chlorite geothermometry. Maximum temperature reached by the Mesozoic cover (Tmax) from Grenoble to the Galibier pass (E-W) and from Saint Jean de Maurienne to Embrun (N-S) yielded almost constant ca. 330 °C temperatures all through the Massif. Temperatures however strongly decrease either westward towards the top of the Vercors sedimentary sequence or eastward towards the Penninic Frontal Thrust. Age constraints were retrieved using 40Ar/39Ar in situ analyses performed on variously strained samples from Alpine shear zones. Over strain gradients, incipient Alpine recrystallizations progressively develop at the expense of former Variscan parageneses. A combined textural and EPMA approach permitted to identify newly formed chlorite and phengite that unequivocally grew in response to deformation or to low grade metamorphism. Chlorites recorded temperatures from ca. 350–150 °C during the activity of shear zones. In parallel, 40Ar/39Ar in situ experiments enabled dating deformation using both synkinematic phengites crystallized below the closure temperature of white-micas and former Variscan muscovite whose isotopic system have been, at least partially re-opened. Activity of top-to-the-west shear zones responsible for the shortening and thickening of the Oisans massif thus occurred between 34 and 33 and 25 Ma. Integrating these new age-constraints, Tmax estimates, and published geological data on the Oisans Massif and neighbouring areas allow proposing a new shortening scenario for the external zones. From ca. 34–33 Ma, the Oisans Massif was buried as a rigid block below more internal units and reached a temperature of ca. 330 °C. Shearing progressively localized along a series of top-to-the-W shear zones in the basement until 25 Ma. Deformation then localized along a major thrust at the base of the ECM massif and propagated along the basement-cover interface below the Vercors massif after 16 Ma.
ISSN: 0264-3707

Droits : info:eu-repo/semantics/OpenAccess
insu-01093878
https://hal-insu.archives-ouvertes.fr/insu-01093878
https://hal-insu.archives-ouvertes.fr/insu-01093878/document
https://hal-insu.archives-ouvertes.fr/insu-01093878/file/GEOD1326RA.pdf
DOI : 10.1016/j.jog.2014.09.004

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
In the Schistes Lustres of Alpine Corsica (France) serpentinized mantle rocks are associated with continental basement and meta-volcanic/-seclimentary cover rocks. The relationships among these different lithologies are especially well exposed in the Monte San Petrone unit, where Alpine metamorphism reached lawsonite-eclogite conditions. The contact between serpentinites and slivers of continental basement, relatively flat-lying over several kilometers, is characterized by evidence of cataclastic deformation pre-dating Alpine High-Pressure ductile fabrics. The serpentinite/continental basement pair is stratigraphically overlain by metasediments with a typical Jurassic-Cretaceous supra-ophiolitic lithostratigraphy, with metaradiolarites passing upward to marbles and cal cschists. Noticeably, no evidence of cataclastic deformation is found in metasediments. These observations indicate that the lithostratigraphy of the Monte San Petrone unit was established during a pre-Alpine polyphase evolution, which culminated in extensive brittle deformation along a flat-lying detachment fault prior to the deposition of Jurassic sediments. We suggest that the inferred Mesozoic extensional tectonics were related to the opening of the Westem Tethys. The Mesozoic architecture of the Monte San Petrone area, which is typical of an Ocean-Continent Transition (OCT) zone, was preserved despite Alpine deformation and metamorphism, when the different lithologies (i.e. meta-ophiolites, continent-derived rocks and metasediments) underwent a common metamorphic evolution, culminating at T=490-550 degrees C and P= 2.2-2.6 GPa. Similar tectonostratigraphic associations are observed in other high-pressure terranes of Alpine Corsica, suggesting that inherited OCT-type domains may be common in Alpine-type orogens.
ISSN: 0024-4937

hal-00617744
https://hal.archives-ouvertes.fr/hal-00617744
DOI : 10.1016/j.lithos.2011.02.013

Éditeur(s) : HAL CCSD Elsevier
Résumé : Folds with hinge lines subparallel to stretching lineation are common features in shear zones and represent extreme cases of fold modification. However, their microstructures and in particular their kinematic significance remain poorly understood. Here we describe the meso- and micro-scale structures and crystallographic preferred orientation (CPO) of quartz and muscovite from a metric-scale shear-modified fold from Plattjen, Saas Fee, Western Internal Alps. The studied fold is of class-2 and the samples collected around the fold have essentially the same microstructures. Quartz [c]-axes plotted in the tectonic coordinate system exhibit an apparent reverse obliquity on opposing limbs. Muscovite fabrics are controlled essentially by the orientation of {001} planes. If the CPO data are plotted in a common reference frame (e.g. either fold or geographical), all samples exhibit essentially the same patterns for both minerals. In particular, relative to the fold axis and axial surface, the reversal of quartz CPO obliquity on opposing limbs is no longer evident. The small obliquity (~ 15°) between the intersection lineation of the two planes of {001} of muscovite and the fold axis results in the apparent reversal of shear sense on opposite limbs when viewing the CPO related to the macroscopic fabric. The homogeneity of the microstructures and CPOs of quartz and muscovite across the fold support the interpretation that the fold developed during simultaneous activation of heterogeneous and homogeneous simple shear, with the former responsible for fold development and the latter responsible for fold rotation and the overwhelming of the heterogeneous deformation. These processes led to the observed parallelism between fold hinge line and local stretching lineation.
ISSN: 0040-1951

hal-00824537
https://hal.archives-ouvertes.fr/hal-00824537
DOI : 10.1016/j.tecto.2011.03.003

Éditeur(s) : HAL CCSD Oxford University Press (OUP)
Résumé : International audience
At Cima di Gagnone, garnet peridotite and chlorite harzburgite lenses within pelitic schists and gneisses correspond to eclogite-facies breakdown products of hydrated peridotites and are suitable for studying dehydration of serpentinized mantle. Thermobarometry and pseudosection modelling yield peak temperatures of 750-850°C and pressures <3 GPa. The minimum temperature recorded by the garnet peridotite corresponds to the maximum conditions experienced by the chlorite harzburgite, suggesting that these rocks recrystallized cofacially at ∼800°C. Alternatively, they might have decoupled during subduction, as achieved in tectonically active plate interface boundaries. The major and rare earth element (REE) variability of the peridotites was mostly acquired during pre-subduction mantle evolution as a result of partial melting and reactive melt flow. The ultramafic suite is also characterized by fluid-mobile element enrichments (B, Pb, As, Sb, Cs, Li, U, Be), which confirm derivation from variably serpentinized protoliths. Similarity in the U, Pb, B, Li and Sr contents of the Gagnone peridotites to present-day oceanic serpentinites suggests that these elements were partly taken up during initial serpentinization by seawater-derived fluids. Positive Be, As and Sb anomalies suggest involvement of fluids equilibrated with crustal (metasedimentary) reservoirs during subsequent subduction metamorphism and peridotite entrainment in (meta)sediments. Fluid-mobile element enrichment characterizes all peak eclogitic minerals, implying that multiple hydration events and element influx pre-dated the eclogite-facies dehydration. Peak anhydrous minerals retain B, Li, As and Sb concentrations exceeding primitive mantle values and may introduce geochemical anomalies into the Earth's mantle. The relatively low contents of large ion lithophile elements and light REE in the Gagnone peridotites with respect to much higher enrichments shown by metasomatized garnet peridotite pods hosted in migmatites (Ulten Zone, Eastern Alps) suggest that the crustal rocks at Gagnone did not experience partial melting. The Gagnone garnet peridotite, despite showing evidence for chlorite dehydration, retains significant amounts of fluid-mobile elements documenting that no partial melting occurred upon chlorite breakdown. We propose that the Gagnone ultramafic rocks represent a prime example of multi-stage peridotite hydration and subsequent dehydration in a plate interface setting.
ISSN: 0022-3530

hal-01054319
https://hal.archives-ouvertes.fr/hal-01054319
DOI : 10.1093/petrology/egt068

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The Mediterranean geodynamic system is an exceptional natural laboratory to study the complexities of back-arc extension during subduction rollback. Corsica is a key locality that recorded the Alpine subduction-collision history followed by 30 Ma of the Apennines slab rollback, responsible for the successive opening, from West to East, of the Liguro-Provençal basin and the Tyrrhenian Sea. The overall strain pattern of the Alpine metamorphic units of Alpine Corsica is studied through a synthesis of i) available geological maps, ii) geochronological data and iii) newly acquired structural data relative to successive events of ductile and brittle extension, Three main stages of extension are recorded: 1/ Syn-metamorphic Oligocene extension accommodated by N140° trending ductile shear zones, that correspond to the reactivation of a major Alpine thrust; 2/ Burdigalian ramp-flat extension with N60°-70° trending fault zones that controlled the deposition of onshore piggy-back basins (e.g. St Florent basin), and 3/ Serravalian N-S trending fault zones. From a geodynamical point of view, these successive extensional deformations in Alpine Corsica can be correlated to the history of the Apennines slab rollback. The two first stages are related to a southeastward rollback of the Appennines slab that successively triggered: 1/ Continental rifting in Oligocene leading to the opening of the Liguro-Provençal basin and 2/ Burdigalian extension with N60°-70° trending fault zone, oblique to the Alpine thrust that, after a counterclockwise rotation of the Corso-Sardinian block, became unable to accommodate extension. Finally, the third stage that gave NS-trending fault zones developed in Serravalian, at the onset of Tyrrhenian rifting, related to an eastward rollback of the Apennines slab, as a response of slab tearing in Sicily.
ISSN: 0040-1951

insu-01424859
https://hal-insu.archives-ouvertes.fr/insu-01424859
https://hal-insu.archives-ouvertes.fr/insu-01424859/document
https://hal-insu.archives-ouvertes.fr/insu-01424859/file/gueydan-tectonoph-2017.pdf
DOI : 10.1016/j.tecto.2016.12.028

Éditeur(s) : HAL CCSD Oxford University Press (OUP)
Résumé : International audience
Convergent plate margins typically experience a transition from subduction to collision dynamics as massive continental blocks enter the subduction channel. Studies of high-pressure rocks indicate that tectonic fragments are rapidly exhumed from eclogite facies to mid-crustal levels, but the details of such dynamics are controversial. To understand the dynamics of a subduction channel we report the results of a petrochronological study from the central Sesia Zone, a key element of the internal Western Alps. This comprises two polymetamorphic basement complexes (Eclogitic Micaschist Complex and Gneiss Minuti Complex) and a thin, dismembered cover sequence (Scalaro Unit) associated with pre-Alpine metagabbros and metasediments (Bonze Unit). Structurally controlled samples from three of these units (Eclogitic Micaschist Complex and Scalaro-Bonze Units) yield unequivocal petrological and geochronological evidence of two distinct high-pressure stages. Ages (U-Th-Pb) of growth zones in accessory allanite and zircon, combined with inclusion and textural relationships, can be tied to the multi-stage evolution of single samples. Two independent tectono-metamorphic 'slices' showing a coherent metamorphic evolution during a given time interval have been recognized: the Fondo slice (which includes Scalaro and Bonze rocks) and the Druer slice (belonging to the Eclogitic Micaschist Complex). The new data indicate separate stages of deformation at eclogite-facies conditions for each recognized independent kilometer-sized tectono-metamorphic slice, between ∼85 and 60 Ma, with evidence of intermittent decompression (ΔP ∼ 0*5 GPa) within only the Fondo slice. The evolution path of the Druer slice indicates a different P-T-time evolution with prolonged eclogite-facies metamorphism between ∼85 and 75 Ma. Our approach, combining structural, petrological and geochronological techniques, yields field-based constraints on the duration and rates of dynamics within a subduction channel.
ISSN: 0022-3530

hal-01054335
https://hal.archives-ouvertes.fr/hal-01054335
DOI : 10.1093/petrology/egu029

Éditeur(s) : HAL CCSD
Résumé : This historical perspective provides an overall view of the main steps that led to the acceptance of the concept of mantle exhumation accompanying lithosphere stretching and extreme crustal thinning. We first remember that the presence of exposures of mantle rocks along oceanic spreading ridges was early reported in the 60's due to the results of sediment cores and dredge hauls collected along the Mid-Atlantic Ridge. In the meantime, detailed analysis of the relationships between oceanic sediments of Late Jurassic age and their primary basement in the Apennine ophiolites led many authors to point to the importance of exhumation of mantle rocks on ancient seafloors. By contrast to the thick sections of classical ophiolites (e.g. Oman), the Alpine-Corsican-Appennine ophiolites are characterized by a relatively small amount of mafic rocks (gabbros and basalts), by the absence of any sheeted dyke complex and by the frequent occurrence of oceanic sediments stratigraphically overlying mantle-derived peridotites and associated gabbroic intrusions. They display some of the characteristics of slow-spreading ridge systems, but, due to their highly tectonized character, they have been interpreted successively either as remnants of oceanic fracture zones of normal ocean or as remnants of very-poorly organized, abnormal oceanic basement. This review shows how the concept of mantle exhumation has been elaborated more or less in the same period both by marine geoscientists and by geologists conducting investigations in ophiolitic units of the Alps-Apennines mountain belt. Dredging and diving results from the Gorringe Bank, the Iberia margin, the Thyrrenian Sea and the Central Atlantic in the 1980's and 1990's provided additional proofs that the mantle is currently exhumed in various oceanic environments, including distal continental margins, back-arc basins and slow-spreading ridges of wide oceans. It is shown finally how renewed cross-information from mountain belts and the oceans, multiplying the examples of sedimentary reworking of mantle material, help better constrain the mechanisms of mantle exhumation. This mechanism progressively appeared as a fundamental step during the processes of extension of both continental and oceanic lithospheres in numerous geological situations worldwide.
Bollettino della Società Geologica Italiana

hal-00475653
https://hal.archives-ouvertes.fr/hal-00475653
DOI : 10.3301/IJG.2009.128.2.279