Éditeur(s) : University of Florida Université des Antilles. Service commun de la documentation
Extrait de : 52e congrès annuel de la Société caribéenne des plantes alimentaires / 52nd annual meeting of the Caribbean food crops society (CFCS), du 10 au 16 juillet 2016. INRA, CFCS
Description : Under tropical and sub-tropical climates, a sustainable development of agriculture is challenging because of the pest pressure with favorable weather conditions. Implementation of appropriate cropping systems including growing cover crops and crop rotation plays a critical role, which can break up the food chain and life cycles of field pests. Some field trials have demonstrated that among all tested summer cover crops, sunn hemp (Crotalaria juncea L. cv. Tropic sun) can grow vigorously during the rainy summer, cover the land quickly and densely, and it can produce a large quantity of biomass in two to three months. More importantly, sunn hemp can suppress soil root-knot nematodes via releasing some nematicides through its roots and through the decomposition of plant residues. Therefore, growing cover crop â? ? sunn hemp during the crop off season and rotating with valuable vegetable crops in the growing season has become a promising cropping system under the subtropical climate. Such a result may have a potential to be implemented in Caribbean countries to improve the sustainable development of agriculture.

Droits : CC-BY-NC-ND - Attribution - Pas d'utilisation commerciale - Pas de modification
Permalien : http://www.manioc.org/fichiers/V16313
V16313

Éditeur(s) : HAL CCSD ACSM
Résumé : International audience
The aim of this study was to examine the effects of the cycle-run and run-cycle successions of the triathlon and duathlon, respectively, on respiratory muscle strength and endurance. Methods: Respiratory muscle strength was assessed by measuring maximal inspiratory (P1max) and expiratory {PEmax) pressures. Respiratory muscle endurance was assessed by measuring the time limit (Tlim). Twelve triathleles participated in a three-trial protocol. The first trial consisted of an incremental cycle test to assess the maximal oxygen uptake (VO2max) of triathletes. Trial 2 consisted of 20 min of cycling followed by 20 min of running (C-R), and trial 3 consisted of 20 min of running followed by 20 min of cycling (R-C). Trials 2 and 3 were performed at the same metabolic intensity (% VO2max). P1max and P1max were measured before and 10 min after C-R and R-C, and I min after the post-C-R and post-R-C Tlim measurements (P1max l'). Tlim was measured I d before and 30 min after C-R and R-C. Results: The results showed a significant decrease in P1max after C-R (126.7 ± 4.3 cmH2O, P < 0.05) and R-C (123.7 ± 4.9 cmH2O, P < 0.05) compared with the baseline values (130 ± 3.8 and 129.6 ± 4.3 cmH2O, respectively). P1max 1' showed a significantly greater decrease after R-C versus C-R(111.2 ± 5.5 cmH2O vs 121.2 ± 3.9 cmH2O,respectively, P < 0.001). Tlim after C-R (3.3 ± 0.3 min) decreased significantly compared with baseline values (4.19 ± 0.3min and 4.02 ± 0.3 min, respectively). However, the Tlim decrease after R-C was significantly greater than after C-R (P < 0.001). Conclusion: We concluded that respiratory muscle strength and endurance were less decreased after the cycle-run succession and that cycling induced a greater decrease in respiratory muscle endurance than running.
Medicine & Science in Sports & exercise

hal-00720796
https://hal.univ-antilles.fr/hal-00720796

Éditeur(s) : HAL CCSD Thieme Publishing
Résumé : International audience
The aim of the present study was to compare the effects of prior cycling and a successive run on respiratory muscle performance during a cycle-run succession as performed in the triathlon. We hypothesized that despite the moderate intensity of exercise and the absence of exhaustion, the crouched cycling position would induce a decrease in respiratory muscle performance that would be reversed by the successive vertical run position. Ten male triathletes (22.6 +/- 1.1 yr) performed a four-trial protocol: (1) an incremental cycle test to assess maximal oxygen uptake (VO2max), (2) 20 min of cycling (C), (3) 20 min of running (R), and (4) 20 min of cycling followed by 20 min of running (C-R). Trials 2, 3 and 4 were performed at the same metabolic intensity, i. e., 75 % of VO2max. Respiratory muscle force was assessed by measuring maximal expiratory (P(Emax)) and inspiratory (P(Imax)) pressures from the functional residual capacity (FRC) before and 10 min after C, R, and C-R. Respiratory muscle endurance was assessed one day before and 30 min after C, R, and C-R, by measuring the time limit (T(lim)), which corresponds to the length of time a respiratory load can be sustained before the process of fatigue develops sufficiently to cause task failure. The results showed a similar significant decrease in P(Imax) (132.4 +/- 4.9 versus 125.7 +/- 5.6 cm H2O, p < 0.05) and T(lim) (5.22 +/- 0.28 versus 3.68 +/- 0.32 min, p < 0.05) post-C and post-C-R (133.7 +/- 4.0 versus 126.9 +/- 5.2 cm H2O, and 5.29 +/- 0.18 versus 3.49 +/- 0.41 min, respectively, p < 0.05) compared with the pre-trial values. In contrast, P(Imax) and T(lim) were not significantly decreased post-R (131.8 +/- 6.1 cm H2O versus 129.6 +/- 6.4 cm H2O, and 4.90 +/- 0.69 versus 4.40 +/- 0.56 min, respectively, p > 0.05). We concluded that moderate intensity exercise not performed to exhaustion induced a decrease in respiratory muscle performance. Moreover, the respiratory muscle fatigue induced by prior cycling was maintained, and neither reversed nor worsened, by the successive run.
ISSN: 0172-4622

hal-00720715
https://hal.univ-antilles.fr/hal-00720715

Éditeur(s) : HAL CCSD American College of Sports Medicine (ACSM)
Résumé : International audience
PURPOSE AND METHODS: To determine the effects of cycling on a subsequent triathlon run, nine male triathletes underwent four successive laboratory trials: 1) an incremental treadmill test, 2) an incremental cycle test, 3) 30 min of cycling followed by 5 km of running (C-R), and 4) 30 min of running followed by 5 km of running (R-R). Before and 10 min after the third and fourth trials, the triathletes underwent pulmonary function testing including spirometry and diffusing capacity testing for carbon monoxide (DL(CO)). During the C-R and R-R trials, arterialized blood samples were obtained to measure arterial oxygen pressure (PaO2). During all trials, ventilatory data were collected every minute using an automated breath-by-breath system. RESULTS: The results showed that 1) the oxygen uptake (VO2) observed during subsequent running was similar for the C-R and R-R trials; 2) the ventilatory response (VE) during the first 8 min of subsequent running was significantly greater in the C-R than in R-R trial (P < 0.05); 3) only the C-R trial induced a significant increase (P < 0.05) in residual volume (RV), functional residual capacity (FRC), and the ratio of residual volume to total lung capacity (RV/TLC); and 4) although a significant decrease (P < 0.05) in DL(CO) was noted after C-R, no difference between the two exercise trials was found for the maximal drop in PaO2. CONCLUSIONS: We concluded that 1) the C-R trial induced specific alterations in pulmonary function that may be associated with respiratory muscle fatigue and/or exercise-induced hypoxemia, and 2) the greater VE observed during the first minute of running after cycling was due to the specificity of cycling. This reinforces the necessity for triathletes to practice multi-trial training to stimulate the physiological responses experienced during the swim-cycle and the cycle-run transitions.
ISSN: 0195-9131

hal-00720412
https://hal.univ-antilles.fr/hal-00720412
https://hal.univ-antilles.fr/hal-00720412/document
https://hal.univ-antilles.fr/hal-00720412/file/Article.pdf

Éditeur(s) : HAL CCSD Thieme Publishing
Résumé : International audience
The aim of the present study was to compare the effects of prior cycling and a successive run on respiratory muscle performance during a cycle-run succession as performed in the triathlon. We hypothesized that despite the moderate intensity of exercise and the absence of exhaustion, the crouched cycling position would induce a decrease in respiratory muscle performance that would be reversed by the successive vertical run position. Ten male triathletes (22.6 +/- 1.1 yr) performed a four-trial protocol: (1) an incremental cycle test to assess maximal oxygen uptake (VO2max), (2) 20 min of cycling (C), (3) 20 min of running (R), and (4) 20 min of cycling followed by 20 min of running (C-R). Trials 2, 3 and 4 were performed at the same metabolic intensity, i. e., 75 % of VO2max. Respiratory muscle force was assessed by measuring maximal expiratory (P(Emax)) and inspiratory (P(Imax)) pressures from the functional residual capacity (FRC) before and 10 min after C, R, and C-R. Respiratory muscle endurance was assessed one day before and 30 min after C, R, and C-R, by measuring the time limit (T(lim)), which corresponds to the length of time a respiratory load can be sustained before the process of fatigue develops sufficiently to cause task failure. The results showed a similar significant decrease in P(Imax) (132.4 +/- 4.9 versus 125.7 +/- 5.6 cm H2O, p < 0.05) and T(lim) (5.22 +/- 0.28 versus 3.68 +/- 0.32 min, p < 0.05) post-C and post-C-R (133.7 +/- 4.0 versus 126.9 +/- 5.2 cm H2O, and 5.29 +/- 0.18 versus 3.49 +/- 0.41 min, respectively, p < 0.05) compared with the pre-trial values. In contrast, P(Imax) and T(lim) were not significantly decreased post-R (131.8 +/- 6.1 cm H2O versus 129.6 +/- 6.4 cm H2O, and 4.90 +/- 0.69 versus 4.40 +/- 0.56 min, respectively, p > 0.05). We concluded that moderate intensity exercise not performed to exhaustion induced a decrease in respiratory muscle performance. Moreover, the respiratory muscle fatigue induced by prior cycling was maintained, and neither reversed nor worsened, by the successive run.
ISSN: 0172-4622

hal-01622938
https://hal-umontpellier.archives-ouvertes.fr/hal-01622938
DOI : 10.1055/s-2003-37201
PUBMED : 12582954

Éditeur(s) : Copernicus Gesellschaft Mbh
Résumé : Deep-sea bivalves found at hydrothermal vents, cold seeps and organic falls are sustained by chemosynthetic bacteria which ensure part or all of their carbon nutrition. These symbioses are of prime importance for the functioning of the ecosystems. Similar symbioses occur in other bivalve species living in shallow and coastal reduced habitats worldwide. In recent years, several deep-sea species have been investigated from continental margins around Europe, West Africa, East America, the Gulf of Mexico, and from hydrothermal vents on the Mid-Atlantic Ridge. In parallel, numerous more easily accessible shallow marine species were studied. We here provide a summary of the current knowledge available on chemosymbiotic bivalves in the area ranging west-to-east from the Gulf of Mexico to Marmara Sea, and north-to-south from the Arctic to the Gulf of Guinea. Characteristics of symbioses in 51 species from the area are summarized for each of the five bivalve families documented to harbor chemosynthetic symbionts (Mytilidae, Vesicomyidae, Solemyidae, Thyasiridae and Lucinidae), and compared among families with special emphasis on ecology, life cycle, and connectivity. Chemosynthetic symbioses are a major adaptation to ecosystems and habitats exposed to reducing conditions, yet relatively little is known regarding their diversity and functioning apart from a few "model species" on which effort has focused over the last 30 yr. In the context of increasing concern about biodiversity and ecosystems, and increasing anthropogenic pressure on Oceans, we advocate for a better assessment of bivalve symbioses diversity in order to evaluate the capacities of these remarkable ecological and evolutionary units to withstand environmental change
Biogeosciences (1726-4170) (Copernicus Gesellschaft Mbh), 2013 , Vol. 10 , N. 5 , P. 3241-3267

Droits : Author(s) 2012. CC Attribution 3.0 License.
http://archimer.ifremer.fr/doc/00133/24417/22431.pdf
DOI:10.5194/bg-10-3241-2013
http://archimer.ifremer.fr/doc/00133/24417/

Éditeur(s) : HAL CCSD
Résumé : International audience
To determine whether exercise modality affects arterial hypoxemia (EIAH) during training-intensity exercise, 13 triathletes performed 20 min of cycling (C) followed by 20 min of running (R): C-R, and two weeks later, 20 min of R followed by 20 min of C:R-C. Each trial was performed at an intensity slightly above the ventilatory threshold and close to the daily training intensity (75 % of VO2max). Ventilatory data were collected continuously using an automated breath-by-breath system. Partial pressure of oxygen in arterial blood (PaO2) was measured after each C and R segment and arterial oxyhemoglobin saturation (SpO2) was monitored continuously via pulse oximetry. The metabolic rate was similar across modalities and trials, i.e., C-R (53.8 +/- 3.8 vs. 51.1 +/- 5.3 ml.min(-1).kg(-1)) and R-C (52.2 +/- 4.5 vs. 53.2 +/- 4.6 ml.min(-1).kg (-1)). EIAH showed significantly greater severity for R compared to C irrespective of the order (p < 0.05 for both trials). R values of PaO2 (and SpO2) for C-R and R-C were 88.7 +/- 6.0 mm Hg (93.0 +/- 0.6 % SpO2) and 86.6 +/- 7.3 mm Hg (93.5 +/- 0.6 % SpO2) and C values were 93.7 +/- 8.4 mm Hg (95.4 +/- 0.4 % SpO2) and 91.4 +/- 5.4 mm Hg (94.8 +/- 0.3 % SpO2). R ventilatory data described a significantly different breathing pattern than C, with higher respiratory rate (35.9 b.min(-1) vs. 51.1 b.min(-1) for C-R, p < 0.01; and 50.0 b.min(-1) vs. 41.5 b.min(-1) for R-C, p < 0.01) and lower tidal volume (2636 ml vs. 2282 ml for C-R, p < 0.02 and 2272 ml vs. 2472 ml for R-C, p < 0.05). We concluded that EIAH was greater during running than cycling for a similar metabolic rate corresponding to training intensity and that EIAH could thus be considered dependent on exercise modality.
Internation Journal of Sports Medicine

hal-00720806
https://hal.univ-antilles.fr/hal-00720806
https://hal.univ-antilles.fr/hal-00720806/document
https://hal.univ-antilles.fr/hal-00720806/file/sm290.pdf

Éditeur(s) : HAL CCSD Société Géologique de France
Résumé : Based on a High-Resolution 3D seismic block acquired in the Gulf of Lion in 2004–2005 we investigated fluid pipes and pockmarks on the top of the interfluve between the Hérault canyon and the Bourcart canyon both created by turbidity currents and gravity flows from the shelf to the deep basin in the north-western Mediterranean Sea. Combining the geometry of the potential fluid pipes with the induced deformation of surrounding sediments leads then to the ability to differentiate between potential fluid sources (root vs source) and to better estimate the triggering mechanisms (allochtonous vs. autochtonous cause). We linked together a set of derived attributes, such as Chaos and RMS amplitude, to a 3D description of pipes along which fluids may migrate. As previously shown in other basins, the induced deformation, creating cone in cone or V-shaped structures, may develop in response to the fluid pipe propagation in unconsolidated sediments in the near surface. The level at the top of a cone structure is diachronous. It means that stratigraphic levels over this surface are deformed at the end of the migration. They collapse forming a depression called a pockmark. These pipes are the result of repeated cycles of fluid expulsion that might be correlated with rapid sea-level rise instead of sediment loading. The most recent event (MIS 2.2 stage) has led to the formation of a pockmark on the modern seafloor. It has been used as a reference for calculating the effect of a rapid sea-level rise on fluid expulsion. As all physical and geometrical parameters are constrained, we were able to define that a + 34 m of sea level rise may account for triggering fluid expulsion from a very shallow silty-sandy layer at 9 m below seafloor since the last glacial stage. This value is consistent with a sea level rise of about 102 m during this period. This study shows that the episodic nature of fluid release resulted from hydromechanical processes during sea-level rise due to the interactivity between high pressure regimes and principal in situ stresses.
ISSN: 0037-9409

hal-01667241
https://hal.archives-ouvertes.fr/hal-01667241
DOI : 10.1051/bsgf/2017190

Éditeur(s) : HAL CCSD Nature Publishing Group
Résumé : International audience
Temperature and fluid pressure conditions control rock deformation and mineralization on geological faults, and hence the distribution of earthquakes1. Typical intraplate continental crust has hydrostatic fluid pressure and a near-surface thermal gradient of 31 ± 15 degrees Celsius per kilometre2, 3. At temperatures above 300–450 degrees Celsius, usually found at depths greater than 10–15 kilometres, the intra-crystalline plasticity of quartz and feldspar relieves stress by aseismic creep and earthquakes are infrequent. Hydrothermal conditions control the stability of mineral phases and hence frictional–mechanical processes associated with earthquake rupture cycles, but there are few temperature and fluid pressure data from active plate-bounding faults. Here we report results from a borehole drilled into the upper part of the Alpine Fault, which is late in its cycle of stress accumulation and expected to rupture in a magnitude 8 earthquake in the coming decades4, 5. The borehole (depth 893 metres) revealed a pore fluid pressure gradient exceeding 9 ± 1 per cent above hydrostatic levels and an average geothermal gradient of 125 ± 55 degrees Celsius per kilometre within the hanging wall of the fault. These extreme hydrothermal conditions result from rapid fault movement, which transports rock and heat from depth, and topographically driven fluid movement that concentrates heat into valleys. Shear heating may occur within the fault but is not required to explain our observations. Our data and models show that highly anomalous fluid pressure and temperature gradients in the upper part of the seismogenic zone can be created by positive feedbacks between processes of fault slip, rock fracturing and alteration, and landscape development at plate-bounding faults.
ISSN: 0028-0836

hal-01685757
https://hal.archives-ouvertes.fr/hal-01685757
DOI : 10.1038/nature22355

Résumé : Une étude de faisabilité de poutres en bois lamellé-collé a été menée en Guyane Française en utilisant les essences locales. Le but est de déterminer les paramètres de collage assurant la bonne résistance mécanique des assemblages par lamellation et par aboutage, nécessaires à la fabrication de poutres en bois lamellé-collé en climat tropical. Trois essences de bois abondantes de différentes densités ont été sélectionnées. Les adhésifs de types Mélamine-Urée-Formol et Résorcinol-Phénol-Formol ont été utilisées. Les paramètres de collage considérés sont : le grammage, le temps d’assemblage fermé et la pression.En utilisant les normes Européennes, plusieurs campagnes de tests ont été conduites sur des échantillons normalisés. Concernant le collage par lamellation, des tests élémentaires de délamination et de cisaillement des joints de colle ont été réalisés. Le test de délamination consiste en deux cycles d’immersion dans l’eau sous pression et de séchage, il induit de sévères variations d’humidité du bois susceptibles de créer des ouvertures des joints de colles. Le collage par aboutage est réalisé sur des poutres normalisées aboutées. Les entures sont obtenues grâce à un outillage standard communément utilisé pour les résineux. Les résultats ont mis en évidence l’influence des propriétés du bois et des paramètres de collage sur la résistance du joint et la résistance mécanique du produit. En effet, les paramètres du bois, tels que la densité, la rétractibilité et l’imprégnation, ont une forte influence sur le collage, en particulier sur la pression et le grammage nécessaires à la production d’un produit commercialisable. Il apparait qu’un bois de densité moyenne et poreux nécessite un grammage et une pression élevés comparé à un bois de densité élevée qui nécessite des valeurs moindres. Aussi, l’influence d’autres paramètres de fabrication, tels que le rabotage, l’encollage double face et simple face ainsi que l’épaisseur des lamelles, a été établie. Par contre il semblerait que le matériel communément utilisé pour l’aboutage des résineux n’est pas adapté aux feuillus tropicaux. En final, des paramètres de collage ont été validés pour la fabrication de lamellé-collé endémique en Guyane Française et une étude du coût de production d’une poutre lamellé-collé standard a identifié les conditions économiques d’une fabrication en Guyane Française.
A feasibility study of glued-laminated timber beams was carried out in French Guiana using local wood species. The aim of the study was to evaluate the gluing parameters that could ensure good mechanical properties for the manufactured glued-laminated beams in tropical climates. Three abundant wood species with different specific gravity were selected for the study. Melamine-Urea-Formaldehyde and Resorcinol-Phenol-Formaldehyde resins were used for gluing. The three gluing parameters considered are: adhesive spread rate, closing assembly time and gluing pressure.Using European standards, several laboratory tests were performed on normalized samples. The evaluation of a successful lamella’s gluing was done by using elementary tests of delamination and shearing. A delamination test consists of two cycles of water immersion at high pressure and drying which induces severe hygroscopic variation in wood thus causing joints opening. The finger-joints are made using a standard tool usually used for cutting softwoods. The performed tests revealed the influence of wood properties and the gluing parameters on the joint resistance and the mechanical properties of the product. Results show that wood properties such as specific gravity, shrinkage coefficient, and permeation, have a high degree of influence on the gluing step especially on the gluing pressure and on the adhesive spread rate needed to produce a commercial product. Furthermore, wood with medium specific gravity needs more adhesive and more pressure than the one with high specific gravity. Additionally, the effects of other manufacturing parameters, such as planning, double or simple side glue spreading and lamellae thicknesses, on the glue joint resistance were demonstrated. Finally, the common tools used for softwoods are not adapted to making the finger joints with tropical hardwoods.In conclusion, optimal gluing parameters for manufacturing glued-laminated timber beams in French Guiana were established and an economical study using standard glued-laminated timber beams revealed the economic conditions under which a successful manufacturing of these local beams can be implemented in French Guiana.

http://www.theses.fr/2011AGUY0484/document

Éditeur(s) : HAL CCSD Oxford University Press (OUP)
Résumé : International audience
Convergent plate margins typically experience a transition from subduction to collision dynamics as massive continental blocks enter the subduction channel. Studies of high-pressure rocks indicate that tectonic fragments are rapidly exhumed from eclogite facies to mid-crustal levels, but the details of such dynamics are controversial. To understand the dynamics of a subduction channel we report the results of a petrochronological study from the central Sesia Zone, a key element of the internal Western Alps. This comprises two polymetamorphic basement complexes (Eclogitic Micaschist Complex and Gneiss Minuti Complex) and a thin, dismembered cover sequence (Scalaro Unit) associated with pre-Alpine metagabbros and metasediments (Bonze Unit). Structurally controlled samples from three of these units (Eclogitic Micaschist Complex and Scalaro-Bonze Units) yield unequivocal petrological and geochronological evidence of two distinct high-pressure stages. Ages (U-Th-Pb) of growth zones in accessory allanite and zircon, combined with inclusion and textural relationships, can be tied to the multi-stage evolution of single samples. Two independent tectono-metamorphic 'slices' showing a coherent metamorphic evolution during a given time interval have been recognized: the Fondo slice (which includes Scalaro and Bonze rocks) and the Druer slice (belonging to the Eclogitic Micaschist Complex). The new data indicate separate stages of deformation at eclogite-facies conditions for each recognized independent kilometer-sized tectono-metamorphic slice, between ∼85 and 60 Ma, with evidence of intermittent decompression (ΔP ∼ 0*5 GPa) within only the Fondo slice. The evolution path of the Druer slice indicates a different P-T-time evolution with prolonged eclogite-facies metamorphism between ∼85 and 75 Ma. Our approach, combining structural, petrological and geochronological techniques, yields field-based constraints on the duration and rates of dynamics within a subduction channel.
ISSN: 0022-3530

hal-01054335
https://hal.archives-ouvertes.fr/hal-01054335
DOI : 10.1093/petrology/egu029

Éditeur(s) : HAL CCSD Wiley-Blackwell
Résumé : International audience
Lawsonite pseudomorphs are used to identify and distinguish the kinematic records of subduction and exhumation in blueschist-facies rocks from Syros (Cyclades; Greece). Lawsonite is a hydrous mineral that crystallizes at high-pressure and low-temperature conditions. During decompression, lawsonite is typically pseudomorphed by an aggregate dominated by epidote and paragonite. Such aggregates are easily deformable and if deformation occurs after the lawsonite breakdown, the pseudomorphs are difficult to distinguish from the matrix. The preservation of the lawsonite crystal shape, despite complete retrogression, indicates therefore that the host blueschist rock has not been affected by penetrative deformation during exhumation, thus providing indication of strain-free conditions. Therefore, tracking the lawsonite growth and destabilization along the P-T path followed by the rocks during a subduction/exhumation cycle provides information about the subduction/exhumation-related deformation. Using microstructural observations and P-T pseudosections calculated with thermocalc, it is inferred that top-to-the-south sense of shear preserved in lawsonite pseudomorph-bearing blueschists on Syros occurred during the prograde metamorphic path within the lawsonite stability field, and is therefore associated with subduction. On the contrary, the deformation with a top-to-the-north sense of shear is observed in surrounding rocks, where lawsonite pseudomorphs are deformed or apparently lacking. This deformation occurred after the lawsonite breakdown during exhumation. At the regional scale, exhumation-related deformation is heterogeneous, allowing the preservation of lawsonite pseudomorphs in significant volumes of blueschists of the central and southern Cyclades. It is argued that such successive shearing deformation events with opposite senses more likely correspond to an exhumation process driven by slab rollback, in which subduction and exhumation are not synchronous
ISSN: 0263-4929

insu-00841214
https://hal-insu.archives-ouvertes.fr/insu-00841214
DOI : 10.1111/jmg.12035

Éditeur(s) : HAL CCSD Elsevier
Résumé : Over-exploitation and fragmentation are serious problems for tropical forests. Most sustainable forest management practices avoid clear-cuts and apply selective logging systems focused on a few commercial species. We applied a simulation model to estimate the impact of such selective logging scenarios on the genetic diversity and demography of four tropical tree species from French Guiana. The simulations used data on genetic and demographic composition, growth, phenology and pollen and seed dispersal obtained for Dicorynia guianensis, Sextonia rubra, Symphonia globulifera and Vouacapoua americana at the experimental site in Paracou. Whereas Symphonia globulifera serves as a model for a species with low logging pressure, the other three species represent the most exploited tree species in French Guiana. In simulations with moderate logging, typical for French Guiana, with large cutting diameter (>60 cm diameter) and long cutting cycles (65 years), the two species V. americana and Sextonia rubra were not able to recover their initial stock at the end of the rotation period, with a large decrease in the number of individuals and in basal area. Under a more intensive logging system (cutting diameter >45 cm diameter, cutting cycles of 30 years) that is common practice in the Brazilian Amazon, only Symphonia globulifera showed no negative impact. Generally, the differences between the genetic parameters in the control scenarios without logging and the logging scenarios were surprisingly small. The main reasons for this were the overlapping of generations and the effective dispersal ability of gene vectors in all species, which guarantee relative homogeneity of the genetic structure in different age classes. Nevertheless, decreasing the population size by logging reduced the number of genotypes and caused higher genetic distances between the original population and the population at the end of the logging cycles. Sensitivity analysis showed that genetic changes in the logging scenarios were principally determined by the growth, densities and cutting diameter of each species, and only to a very small extent by the reproductive system including factors such as pollen and seed dispersal and flowering phenology
ISSN: 0006-3207

hal-01032050
https://hal.archives-ouvertes.fr/hal-01032050
DOI : 10.1016/j.biocon.2006.02.014

Éditeur(s) : Pergamon-elsevier Science Ltd
Résumé : Society's needs for a network of in situ ocean observing systems cross many areas of earth and marine science. Here we review the science themes that benefit from data supplied from ocean observatories. Understanding from existing studies is fragmented to the extent that it lacks the coherent long-term monitoring needed to address questions at the scales essential to understand climate change and improve geo-hazard early warning. Data sets from the deep sea are particularly rare with long-term data available from only a few locations worldwide. These science areas have impacts on societal health and well-being and our awareness of ocean function in a shifting climate. Substantial efforts are underway to realise a network of open-ocean observatories around European Seas that will operate over multiple decades. Some systems are already collecting high-resolution data from surface, water column, seafloor, and sub-seafloor sensors linked to shore by satellite or cable connection in real or near-real time, along with samples and other data collected in a delayed mode. We expect that such observatories will contribute to answering major ocean science questions including: How can monitoring of factors such as seismic activity, pore fluid chemistry and pressure, and gas hydrate stability improve seismic, slope failure, and tsunami warning? What aspects of physical oceanography, biogeochemical cycling, and ecosystems will be most sensitive to climatic and anthropogenic change? What are natural versus anthropogenic changes? Most fundamentally, how are marine processes that occur at differing scales related? The development of ocean observatories provides a substantial opportunity for ocean science to evolve in Europe. Here we also describe some basic attributes of network design. Observatory networks provide the means to coordinate and integrate the collection of standardised data capable of bridging measurement scales across a dispersed area in European Seas adding needed certainty to estimates of future oceanic conditions. Observatory data can be analysed along with other data such as those from satellites, drifting floats, autonomous underwater vehicles, model analysis, and the known distribution and abundances of marine fauna in order to address some of the questions posed above. Standardised methods for information management are also becoming established to ensure better accessibility and traceability of these data sets and ultimately to increase their use for societal benefit. The connection of ocean observatory effort into larger frameworks including the Global Earth Observation System of Systems (GEOSS) and the Global Monitoring of Environment and Security (GMES) is integral to its success. It is in a greater integrated framework that the full potential of the component systems will be realised. Crown Copyright (C) 2011 Published by Elsevier Ltd. All rights reserved.
Progress In Oceanography (0079-6611) (Pergamon-elsevier Science Ltd), 2011-10 , Vol. 91 , N. 1 , P. 1-33

Droits : 2011 Published by Elsevier Ltd. All rights reserved.
http://archimer.ifremer.fr/doc/00044/15557/15923.pdf
DOI:10.1016/j.pocean.2011.05.001
http://archimer.ifremer.fr/doc/00044/15557/

Éditeur(s) : Wiley-blackwell Publishing, Inc
Résumé : Oceanic larvae of the European (Anguilla anguilla) and American (A. rostrata) eels have to cross the Atlantic Ocean from the Sargasso Sea to European or North American coasts before entering continental habitats. In some European rivers, eel recruitment is now < 1% of levels in the 1980s. A better understanding of the effects of anthropogenic pressures and environmental fluctuations on eel larvae and subsequent recruitment is a prerequisite to build efficient management plans. The present paper provides insight into the critical oceanic phase of the eel life cycle with a focus on the duration of the larval migration whose estimates varies between 7 months and more than 2 years in both species. Does this range correspond to a natural variability in larval duration or does it stem from methodological artefacts? We first review the different methods used to estimate the duration of larval migration and critically describe their possible sources of misinterpretation. We then evaluate the consistency of these methods with the current knowledge about the ecology and physiology of eel larvae and the physical oceanography. While a moderate discrepancy in migration duration was found between methods for the American eel, the discrepancy was large in the European eel. In this species, otolith microstructure studies indicated migration durations between 7 and 9 months, while other methods pointed to durations of about 2 years. We show that estimates in favour of a long migration duration seem more robust to methodological caveats than methods estimating short durations of migration.
Fish And Fisheries (1467-2960) (Wiley-blackwell Publishing, Inc), 2010-09 , Vol. 11 , N. 3 , P. 289-306

Droits : 2010 Blackwell Publishing Ltd.
http://archimer.ifremer.fr/doc/00011/12208/9033.pdf
DOI:10.1111/j.1467-2979.2010.00362.x
http://archimer.ifremer.fr/doc/00011/12208/

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Synthetic hydroxylated titanium-bearing and undoped MgO-buffered forsterite crystals were heated at atmospheric pressure in air at temperatures from 800 to 1200 °C to determine hydrogen diffusion as a function of the type of point-defect mechanism by which the hydroxyl is incorporated. OH-stretching bands, measured by infrared spectroscopy, were assigned to the four substitution mechanisms: Ti-clinohumite point defects, silicon and magnesium vacancies, and point defects associated with trivalent cations. In the experiments at 800 to 1000 °C, hydrous defects related to trivalent cations and Mg-vacancies disappear first in the Ti-doped forsterite, followed by the hydrous defects related to Ti and a fraction of the hydrated Si-vacancies. Measured bulk diffusion coefficients for hydrogen exchange related to the latter process are one order of magnitude slower than previously reported and with higher activation energy (View the MathML source296±14 kJmol−1). After the elimination of the defects related to Ti, the hydroxyl concentration related to Si-vacancies remained constant for the duration of the experiments. This observation is in agreement with the very slow diffusivity of hydrogen in Si-vacancies measured in the undoped MgO-buffered dehydroxylation experiments at higher temperatures (from 1000 to 1200 °C), which were ∼3 orders of magnitude slower than previously reported at 1000 °C, and with an activation energy of View the MathML source461±11 kJmol−1. Hydrogen diffusion in forsterite is far more complex than previously assumed. This complexity can be used to gain more information on the timescales of the processes causing olivine to lose its structural “water”, but quantitative modeling will require not only the knowledge of the intrinsic diffusivities of the different hydrous defects but also their relative proportions and the possible reactions between them.
ISSN: 0012-821X

hal-01172253
https://hal.archives-ouvertes.fr/hal-01172253
DOI : 10.1016/j.epsl.2014.01.055

Éditeur(s) : HAL CCSD
Résumé : International audience
In many geological reservoirs, open fractures or fault zones generally induce high spatial variability of hydrodynamical properties and shape the main deep-seated flow paths. It is of crucial interest to determine their structure and properties in order to achieve a sound and sustained exploitation of resources or to estimate the risk of failure of any underground storage. Tiltmeters have emerged as new tools to observe deformation generated by groundwater flow. As such instruments are highly sensitive to pressure gradients, they are perfectly suited for monitoring channelized flow in connected fractures and fault zones. Hence, they provide a unique insight of these reservoirs' geometry and dynamics over broad time scales. Here we demonstrate that continuous tilt data from surface long baseline tiltmeters (LBT) can be used alone to evaluate the general functioning of a fractured hardrock system and estimate the hydraulic properties of its main conductive features. The study is applied to the pumping site of Ploemeur observatory (Brittany, France) which is well documented and instrumented, and therefore forms a convenient setting for introducing LBT as tools for fractured media hydrology. On the short term, tilt signals are strongly correlated with pumping cycles and associated head level changes in well-connected boreholes. Besides, when pumps are stopped the maximal tilt direction is systematically perpendicular to a subvertical fault zone whose azimuth of strike has thereby been refined down to degree precision. By using a semi-analytical model of deformation, we establish the link between tilt and pressure change during pumping interruptions which then allows for hydraulic properties estimation from tilt measurements only. Finally, we validate our results with previous estimates obtained from other studies and discuss the orientation of future work that could enhance these estimates.
AGU Fall Meeting 2014
San Francisco, United States

insu-01093437
https://hal-insu.archives-ouvertes.fr/insu-01093437

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Slices of polycyclic metasediments (marbles and meta-cherts) are tectonically amalgamated with the polydeformed basement of the Dent Blanche tectonic system along a major Alpine shear zone in the Western Alps (Becca di Salé area, Valtournenche Valley). A combination of techniques (structural analysis at various scales, metamorphic petrology, geochronology and trace element geochemistry) was applied to determine the age and composition of accessory phases (titanite, allanite and zircon) and their relation to major minerals. The results are used to reconstruct the polyphase structural and metamorphic histories, comprising both pre-Alpine and Alpine cycles. The pre-Alpine evolution is associated with low-pressure high-temperature metamorphism related to Permo-Triassic lithospheric thinning. In meta-cherts, microtextural relations indicate coeval growth of allanite and garnet during this stage, at ~ 300 Ma. Textures of zircon also indicate crystallisation at HT conditions; ages scatter from 263 to 294 Ma, with a major cluster of data at ~ 276 Ma. In impure marble, U-Pb analyses of titanite domains (with variable Al and F contents) yield apparent 206Pb/238U dates range from Permian to Jurassic. Chemical and isotopic data suggest that titanite formed at Permian times and was then affected by (extension-related?) fluid circulation during the Triassic and Jurassic, which redistributed major elements (Al and F) and partially opened the U-Pb system. The Alpine cycle lead to early blueschist facies assemblages, which were partly overprinted under greenschist facies conditions. The strong Alpine compressional overprint disrupted the pre-Alpine structural imprint and/or reactivated earlier structures. The pre-Alpine metamorphic record, preserved in these slices of metasediments, reflects the onset of the Permo-Triassic lithospheric extension to Jurassic rifting.
ISSN: 0024-4937

hal-00758123
https://hal.archives-ouvertes.fr/hal-00758123
DOI : 10.1016/j.lithos.2012.05.007

Éditeur(s) : HAL CCSD Wiley
Résumé : International audience
Scientific interest in urban meteorology has increased because highly populated areas experience high vulnerability to pollution or heavy rain. However, compared to urban air quality or urban heat island (UHI) processes, the urban water vapour cycle is poorly understood because it has been investigated less due to the lack of upper-air measurements and the high sensitivity of surface measurements to local heterogeneities. In this paper, surface measurements of wind, temperature, pressure and humidity, as well as integrated water vapour (IWV) from GPS and MODIS and numerical simulations, have been used to investigate the urban cycle of water vapour in May and June 2004 during the VAPIC field experiment in the Paris area. The surface data show the typical characteristics of an urban area with the absence of water vapour sources and a UHI of about 6 °C at night. The urban IWV distribution differs completely, with an urban IWV excess on average between 1600 and 0600 UTC (with a maximum of about 1.5 kg m−2 at 0600 and 1700 UTC). No IWV difference between the urban and rural areas is found in the middle of the day. The numerical simulations reproduce accurately the urban IWV anomaly. Shallow surface wind convergence associated with the UHI during nighttime provides moisture from the rural areas. Urban areas are therefore under wind convergence for most of the time. The rural water vapour sources and the depth of the convergence control the amplitude of the urban IWV excess. At about 1200 UTC, entrainment at the top of the urban boundary layer is the key process that inhibits the urban IWV excess observed at night
ISSN: 0035-9009

hal-00406370
https://hal.archives-ouvertes.fr/hal-00406370
DOI : 10.1002/qj.446

Éditeur(s) : HAL CCSD Inter Research
Résumé : International audience
The main objective of the VULSACO (VULnerability of SAndy COasts to climate change and anthropic pressure) project was to investigate present day and potential future vulnerability of sandy coasts at the 2030 horizon, i.e. on a time scale related to climate variability. The method, based on a multidisciplinary approach bringing together geologists, geographers, physicists, social psychologists, engineers and stakeholders, was structured around 4 axes: field data analysis; numerical modelling; analysis of governance and stakeholder perceptions; and development of vulnerability indexes. This approach was designed to investigate vulnerability at a local scale and was applied to 4 contrasting beaches located in France: Sète Lido (Mediterranean Sea), Truc Vert and La Tresson beaches (Atlantic Ocean), and Dewulf (English Channel). The results focus on decadal and multi-annual beach trends at the Truc Vert beach site. There is almost no trend in beach volume at Truc Vert beach, although there is a variation in this parameter on a cycle of 2 to 3 yr, with variations related to wave energy and probably to indexes of climate variability. Numerical modelling identified the sensitivity of beach responses to changes in wave height and direction, especially in terms of subtidal morphology and the potential development of shoreline instability. Together with the observed offshore wave angle at the Biscay Buoy, these model results suggest that a potential change in wave angle due to climate variability could significantly modify the bars' morphology. The combination of data analysis and numerical modelling contributed to the development of vulnerability indexes designed for sandy coasts, which take into account climate-dependant variables such as waves. This allowed the differentiation of the sites in terms of vulnerability to erosion: Sète Lido and Truc Vert beach were the most and least vulnerable sites, respectively. These indexes help in identifying the dominant components of beach vulnerability, and provide potential for the study of how anthropogenic factors affect vulnerability. The study of stakeholder perceptions and decision-making with regard to climate-related risk also highlighted potential anthropogenic effects on beach vulnerability, and identified possible site-specific outcomes.
ISSN: 0936-577X

hal-00843946
https://hal-brgm.archives-ouvertes.fr/hal-00843946
DOI : 10.3354/cr01153