Éditeur(s) : HAL CCSD Oxford University Press (OUP)
Résumé : International audience
BACKGROUND: The timing of cardiac surgery after stroke in infective endocarditis (IE) remains controversial. We examined the relationship between the timing of surgery after stroke and the incidence of in-hospital and 1-year mortalities. METHODS: Data were obtained from the International Collaboration on Endocarditis-Prospective Cohort Study of 4794 patients with definite IE who were admitted to 64 centers from June 2000 through December 2006. Multivariate logistic regression and Cox regression analyses were performed to estimate the impact of early surgery on hospital and 1-year mortality after adjustments for other significant covariates. RESULTS: Of the 857 patients with IE complicated by ischemic stroke syndromes, 198 who underwent valve replacement surgery poststroke were available for analysis. Overall, 58 (29.3%) patients underwent early surgical treatment vs 140 (70.7%) patients who underwent late surgical treatment. After adjustment for other risk factors, early surgery was not significantly associated with increased in-hospital mortality rates (odds ratio, 2.308; 95% confidence interval [CI], .942-5.652). Overall, probability of death after 1-year follow-up did not differ between 2 treatment groups (27.1% in early surgery and 19.2% in late surgery group, P = .328; adjusted hazard ratio, 1.138; 95% CI, .802-1.650). CONCLUSIONS: There is no apparent survival benefit in delaying surgery when indicated in IE patients after ischemic stroke. Further observational analyses that include detailed pre- and postoperative clinical neurologic findings and advanced imaging data (eg, ischemic stroke size), may allow for more refined recommendations on the optimal timing of valvular surgery in patients with IE and recent stroke syndromes.
ISSN: 1058-4838

hal-00875143
https://hal.archives-ouvertes.fr/hal-00875143
DOI : 10.1093/cid/cis878
PUBMED : 23074311

Éditeur(s) : HAL CCSD Springer Verlag/EDP Sciences
Résumé : International audience
Context: Woodcutting is a very old technology but scientific research is scarce on the subject. In the last 50 years much work on basic mechanisms as well as industrial processes has been done in France. Aims: The specific nature of wood introduces strong differences between wood and metal cutting processes. The paper focuses on French teams' contributions. Results: The basic aspects of the tool–material interaction for different basic modes in woodcutting are highlighted. In primary conversion such as sawing, veneer cutting or green wood chipping, huge progress comes from automation and the possibility of linking the process to log and product quality through new sensors. In secondary processing much has been done on the links between the cutting process, surface qualification and the properties of these surfaces for further processing, such as gluing or coating. Tool wear depends on the cutting process, timber quality, and species. Trade-offs are required in tool technology and coating technologies may improve tool life. Conclusion: A large amount of knowledge and innovation has come from 50 years of worldwide research effort, with France being particularly active in this period. The transfer of skills from metals cutting industry was often a key, but much is needed to move closer to both metal cutting sector and woodcutting skills among craftsmen.
ISSN: 1286-4560

hal-01135156
https://hal.archives-ouvertes.fr/hal-01135156
https://hal.archives-ouvertes.fr/hal-01135156/document
https://hal.archives-ouvertes.fr/hal-01135156/file/Wood_machining_focus_French_research_Thibaut_al_2015.pdf
DOI : 10.1007/s13595-015-0460-2

Éditeur(s) : HAL CCSD Réseau « Développement durable et territoires fragiles »
Résumé : The Green and Blue infrastructure (Trame verte et bleue –TVB) is a new conservation policy tool based on the notions of ecological network and corridor. The introduction of this new instrument through the French Grenelle environment commitments brings about some change in the spatial strategy of the conservation policy. Beyond the identification of priority conservation areas, ecological planning of all the territory is concerned. The TVB’s implementation process establishes the connection of multi and nested decisional and action levels. It thus creates specific situations of complexity and uncertainty that require innovation and perpetual change of governance. The study of the Auvergne region case through the adaptive governance analytical framework highlights the potential fruitful role of Regional nature parks in such dynamics of change and learning. Mots-clés : aménagement durable des territoires, biodiversité, réseau écologique, corridor écologique, gouvernance adaptative, socio-écosystème, trame verte et bleue Keywords : Sustainable landplaning, Biodiversity, Ecological network, Adaptive governance, socio-ecosystem
La Trame verte et bleue (TVB), nouveau dispositif d’action publique visant à enrayer la perte de biodiversité traduit un renouvellement des référentiels de justification des politiques de conservation et de leur stratégie territoriale. Il s’agit d’intégrer la planification écologique dans l’aménagement de l’ensemble du territoire. Le processus de territorialisation de la TVB met en rapport de multiples niveaux de décision et d’action imbriqués. Il crée de ce fait des configurations inédites de complexité et d’incertitude et implique des innovations en termes de gouvernance que le cadre analytique de la gouvernance adaptative permet d’appréhender. En nous appuyant sur l’exemple du Parc Naturel Régional des Volcans d’Auvergne, nous analysons le rôle que ces institutions sont susceptibles de jouer dans ces dynamiques de changement et d’apprentissage socio-technique et politique qui conditionnent une mise en œuvre effective de la TVB.
ISSN: 1772-9971

hal-01195370
https://hal.archives-ouvertes.fr/hal-01195370
DOI : 10.4000/developpementdurable.9675
PRODINRA : 269288

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Fromthe Proterozoic to the Quaternary, the evolution of the Earthwas characterised by recurrent periods of glaciation.However, the margins of many ancient ice-sheets are poorly defined on palaeogeographic reconstructions.The extent and outlines of ancient ice sheets can be better understood through careful documentation ofsediments deposited at the ice-sheet margin. An outstanding example is provided herein based on an end-Ordovician archive in Libya (Tihemboka area, Murzuq Basin). The four sets of structures include: i) subglacialglaciotectonic structures and soft sediment deformations from flowing glacier ice, such as intraformational glacialstriae, intraformational deformation (shear planes, sheath folds), normal microfaults, and large-scaleglaciotectonic folds-and-thrusts; (ii) structures resulting from overpressured subglacial (meltwater) flowssuch as clastic dykes and tunnel valleys; (iii) proglacial depositional structures and facies related to highmagnitudemeltwater floods such as sandstone intraclasts, large-scale bedforms resulting from supercriticalflows, climbing-dune cross-stratification and kettle holes; and (iv) deformation structures resulting from freefloating and nonglacier ice such as ice-keel scours and ice-crystal marks. Such a set of structures points to anice-marginal (essentially continental) depositional setting, and provides an excellent suite of criteria to identifymargins of ancient ice sheets in the stratigraphic record. At a regional scale, a reconstruction through time andspace of the related depositional wedge is proposed. This corresponded to a seismic-scale (N120 m in thickness,40 km in length) ice-marginal wedge in front of an essentially warm-based ice-sheet inducing concomitantlarge-scale glaciotectonic deformation, glacial basin and tunnel valley downcuttings. The related ice-front wasassociated with high-energy meltwater flows feeding a network of deeply incised proglacial channels downstreamand, beyond them, a fluvioglacial deltaic system. Shallow ice-marginal permafrost most likely affectedthe depositional wedge. At a larger scale, the Tihemboka ice-marginal wedge is interpreted as related to a stillstandperiod over the Gondwana platform, developed over an estimated interval of a few thousands of years.Based on these data, the conditions that arose in a particularly favourable context for the development, the preservationand the identification of ice-marginal wedges in the geological record are reviewed. Significantmeltwater-derived sediment deposition and aggradation in an accommodation space resulting either frompreglacial inheritance, glacial downcuttings and/or glacio-isostatic lithospheric flexure, or active tectonic subsidence(>1 Myr) are required for their formation and subsequent preservation.
ISSN: 0012-8252

insu-01184739
https://hal-insu.archives-ouvertes.fr/insu-01184739
DOI : 10.1016/j.earscirev.2015.06.006

Éditeur(s) : HAL CCSD Blackwell Publishing
Résumé : International audience
Differentiating between forced regressive deposits from deglacial periods inhigh latitude domains and forced regressive deposits from the onset of glacialperiods in low latitude domains is fundamental for the accurate interpretationof glacial cycles within the geological record and then for thereconstruction of palaeogeography and palaeo-climate. A forced regressivedeglacial sequence is documented from the Lake Saint-Jean basin (Quebec,Canada). In this area, the Late Pleistocene to Holocene sediments haverecorded the Laurentide ice sheet retreat accompanied by the invasion ofmarine waters (Laflamme Gulf) from ca 129 cal kyr BP. Subsequently, fluviodeltaicand coastal prograding wedges were deposited; they followed thebase-level fall due to glacio-isostatic rebound. This succession, representinga transition from glacial to post-glacial periods within a previously glaciatedarea, was investigated through recent mapping, preserved landforms, faciesanalysis, and new optical stimulated luminescence and radiocarbon dates.Three basin-scale geological sections share a common lower part made ofisolated ice-contact fan deposits overlying bedrock. Throughout the entirebasin, ice-contact fans are capped by glacimarine muds. Above, fluvial andcoastal prograding systems were deposited and evolved through four steps:(i) deltaic systems progressively increased in width; (ii) coastal influence onsedimentation increased; (iii) hydrographic drainage systems became moreorganised; and (iv) deltas graded from steep (Gilbert delta) to low-angle foresets(mouth-bar delta). Deposited during the base-level fall from glacioisostaticrebound, the complete succession has been designated as a singlefalling stage system tract referred to as a deglacial falling stage system tract.It is representative of a deglaciation sequence in areas previously covered byice during glacial periods (i.e. medium to high latitude domains). Diagnosticcriteria are provided to identify such a deglacial falling stage system tract inthe geological record, which may aid identification of previously unknownglacial cycles.
ISSN: 1469-3496

insu-01184731
https://hal-insu.archives-ouvertes.fr/insu-01184731
DOI : 10.1111/sed.12196

Éditeur(s) : HAL CCSD De Gruyter
Résumé : International audience
The data available in the literature concerning wood cutting forces permit to build models or to simulate the main wood machining processes (milling, sawing, peeling etc.). This approach contributes to a better understanding of formation of wood surfaces and chips and the data may be helpful to optimize cutting geometry, reduce tool wear, improve tool material, and to size tool-machines. The models may also be useful for industrial application in two ways: (1) providing data to optimise the settings for a given operation (batch approach) and (2) building predictive models that could be the basis of an online control systems for the machining processes (interactive approach). A prerequisite for this is that numerous machining tests on different wood materials are performed based on experiences with different kind of tools and experimental devices. With potential industrial applications in focus, the emphasis of this review was on the wood peeling process, which is a very demanding special case of wood cutting. Though not so many industrial machines are equipped with expensive force sensors, there is a lot of high quality information available about cutting forces which may be useful to improve the scientific or technologic knowledge in wood machining. Alternative parameters, such as vibration or sound measurements, appear to be promising substitutes in the praxis, particularly to feed online control systems of any wood cutting process.
ISSN: 0018-3830

hal-00876003
https://hal.archives-ouvertes.fr/hal-00876003
https://hal.archives-ouvertes.fr/hal-00876003/document
https://hal.archives-ouvertes.fr/hal-00876003/file/LABOMAP_Holzforschung_2009_denaud.pdf
ENSAM : http://hdl.handle.net/10985/7419

Éditeur(s) : HAL CCSD Wiley-VCH Verlag
Résumé : International audience
Deciphering the assembly history of the Milky Way is a formidable task, which becomes possible only if one can produce high-resolution chrono-chemo-kinematical maps of the Galaxy. Data from large-scale astrometric and spectroscopic surveys will soon provide us with a well-defined view of the current chemo-kinematical structure of the Milky Way, but will only enable a blurred view on the temporal sequence that led to the present-day Galaxy. As demonstrated by the (ongoing) exploitation of data from the pioneering photometric missions CoRoT, Kepler, and K2, asteroseismology provides the way forward: solar-like oscillating giants are excellent evolutionary clocks thanks to the availability of seismic constraints on their mass and to the tight age-initial-mass relation they adhere to. In this paper we identify five key outstanding questions relating to the formation and evolution of the Milky Way that will need precise and accurate ages for large samples of stars to be addressed, and we identify the requirements in terms of number of targets and the precision on the stellar properties that are needed to tackle such questions. By quantifying the asteroseismic yields expected from PLATO for red-giant stars, we demonstrate that these requirements are within the capabilities of the current instrument design, provided that observations are sufficiently long to identify the evolutionary state and allow robust and precise determination of acoustic-mode frequencies. This will allow us to harvest data of sufficient quality to reach a 10% precision in age. This is a fundamental pre-requisite to then reach the more ambitious goal of a similar level of accuracy, which will only be possible if we have to hand a careful appraisal of systematic uncertainties on age deriving from our limited understanding of stellar physics, a goal which conveniently falls within the main aims of PLATO's core science.
ISSN: 0004-6337

hal-01541393
https://hal.archives-ouvertes.fr/hal-01541393
ARXIV : 1706.3778
BIBCODE : 2017AN....338..644M
DOI : 10.1002/asna.201713385

Résumé : Implementation of ecosystem-based approaches to marine management points to several shared objectives between conservation and fishery management that require better knowledge of the life history of the exploited resources, elucidation of the information encoded in the calcified tissues (otoliths, scales, bones, shells, and corals) of marine and freshwater organisms, and support for knowledge-based, sustainable ocean management and use. Calcified tissues have been employed since the 19th century to gain knowledge of life traits, population structure, and environmental relationships of fish and molluscs. Breakthrough advances include the discovery by Pannella (1971) of the daily growth increments and the discovery by Radtke (1984) of otolith tracer approaches, resulting in an exponential growth of publications and four dedicated international symposia. IOS2014 will be the fifth in a series of independent symposia convened since 1993, to encourage the exchange of information and expertise, and promote the development of new techniques and applications for otolith-based analysis in ecology, management, and conservation. This international forum is the centre for the exchange of information on developments in the field. New techniques of analysis, statistical treatment, and indeed new areas of application are all presented in this forum. The IOS series started in Hilton Head (USA) in 1993, followed by IOS1998 in Bergen (Norway), IOS2004 Townsville (Australia), and the IOS2009 Symposium held in Monterey (USA). In general, attendance ranged between 250–350 participants. IOS2009 counted 268 registrants from 36 countries, despite the economic crisis.

Droits : ICES - All Rights Reserved
http://archimer.ifremer.fr/doc/00221/33260/31736.pdf
http://archimer.ifremer.fr/doc/00221/33260/

Éditeur(s) : HAL CCSD Springer Verlag (Germany)
Résumé : International audience
Tight control of basal cytosolic Ca2+ concentration is essential for cell survival and to fine-tune Ca2+-dependent cell functions. A way to control this basal cytosolic Ca2+ concentration is to regulate membrane Ca2+ channels including store-operated Ca2+ channels and secondary messenger-operated channels linked to G-protein-coupled or tyrosine kinase receptor activation. Orai, with or without its reticular STIM partner and Transient Receptor Potential (TRP) proteins, were considered to be the main Ca2+ channels involved. It is well accepted that, in response to cell stimulation, opening of these Ca2+ channels contributes to Ca2+ entry and the transient increase in cytosolic Ca2+ concentration involved in intracellular signaling. However, in various experimental conditions, Ca2+ entry and/or Ca2+ currents can be recorded at rest, without application of any experimental stimulation. This led to the proposition that some plasma membrane Ca2+ channels are already open/activated in basal condition, contributing therefore to constitutive Ca2+ entry. This article focuses on direct and indirect observations supporting constitutive activity of channels belonging to the Orai and TRP families and on the mechanisms underlying their basal/constitutive activities.
ISSN: 0175-7571

inserm-01526286
http://www.hal.inserm.fr/inserm-01526286
http://www.hal.inserm.fr/inserm-01526286/document
http://www.hal.inserm.fr/inserm-01526286/file/EBJO-D-16-00056_R1-2%20%282%29.pdf
PUBMED : 28516266