Éditeur(s) : HAL CCSD Oxford University Press (OUP)
Résumé : International audience
Serpentinization of olivine-rich troctolite from core 227, Integrated Ocean Drilling Program (IODP) Hole U1309D ranges from 10 to 90. Two episodes of serpentinization are recognized. The first, dominant in weakly serpentinized samples, is an approximately isochemical (except for water) replacement of olivine (Fo(8485)) by a mixture of serpentine (antigorite, Mg-number 92) and brucite (amakinite-rich; Mg-number 65). The compositions of the minerals in type 1 veins are a reflection of FeMg exchange between olivine and the brucite serpentine formed during early serpentinization. The early serpentinite veins (type 1) are thin ( 005 mm), irregular, and exploit pre-existing cracks in olivine. The presence of antigorite suggests that early serpentinization occurred at T 300C. Type 1 veins reflect rock-dominated serpentinization, became isolated early in their history, and persist as relicts in all but the most altered samples. The main episode of serpentinization is manifested by through-going lizardite (average Mg-number 96)magnetite veins (type 2). Type 2 veins define an anastomosing foliation, may be several millimeters in width and appear to exploit pre-existing, favorably oriented type 1 veins. Type 2 veins reflect open-system serpentinization. Magnetite in these veins formed by oxidation of the Fe in brucite and serpentine, whereas addition of silica to the system converted the Mg-component of the brucite to serpentine. Magnetite forms one or more distinct bands in the interior of the vein and is never in direct contact with relict olivine. A bruciteserpentine mixture, similar to that found in type 1 veins, but with lizardite instead of antigorite, is commonly present at the margins of type 2 veins (i.e. where they are in reaction contact with relict olivine). We interpret type 2 veins as a steady-state system where brucite continually forms at the olivinevein contact and then reacts out in the interior of the vein. This continual formation and destruction of brucite imposes an exceptionally low a(SiO2) on the system. Magnetite and olivine are never in contact in type 2 veins (or anywhere else) because the olivine-out reaction yields ferroan brucite and not magnetite. The desilication of serpentine in the type 2 veins is a reflection of the inherent instability of Fe-rich serpentine with respect to magnetite at low silica activity. Thus, the composition of serpentine in equilibrium with magnetite in serpentinites is a function of serpentinemagnetite and not serpentineolivine equilbria.
ISSN: 0022-3530

hal-00420931
https://hal.archives-ouvertes.fr/hal-00420931
DOI : 10.1093/petrology/egp004

Éditeur(s) : HAL CCSD Geological Society, London
Résumé : This collection of papers presents recent advances in the study of deformation mechanisms and rheology and their applications to tectonics. Many of the contributions exploit new petrofabric techniques, particularly electron backscatter diffraction, to help understand the evolution of rock microstructure and mechanical properties.
Deformation Mechanisms, Rheology and Tectonics: Microstructures, Mechanics and Anistropy;Geological

hal-00685575
https://hal.archives-ouvertes.fr/hal-00685575

Éditeur(s) : HAL CCSD Geological Society of London
Résumé : International audience
Since the early descriptions published by Callaway in 1884, the gently dipping mylonites exposed along the Moine Thrust at the Stack of Glencoul have drawn generations of geologists to the northern part of the Assynt district. These mylonites, derived from Cambrian quartzites (footwall) and Moine pelites and psammites (hanging wall), have figured prominently in: a) early research into the influence of crystal plastic deformation and recrystallization on microstructural and crystal fabric evolution; b) debates on the kinematic interpretation of macro- and micro-structures and crystal fabrics; and c) debates on the tectonic significance of such kinematic data. In this paper first we briefly review the historical aspects of this research and then, using both previously published and unpublished data, document the finite strain and quartz fabric development at this classic mylonite locality. A tectonic interpretation of these data, together with quantitative estimates of flow vorticities associated with mylonite formation at the Stack of Glencoul, are presented in a companion paper by Law (2010).
Continental Tectonics and Mountain Building: The Legacy of Peach and Horne, Geological Society Speci

hal-00564962
https://hal.archives-ouvertes.fr/hal-00564962

Éditeur(s) : HAL CCSD Wiley
Résumé : Over the past three decades, many small-scale floristic studies of white-sand forests across the Amazon basin have been published. Nonetheless, a basin-wide description of both taxonomic and phylogenetic alpha and beta diversity at regional scales has never been achieved. We present a complete floristic analysis of white-sand forests across the Amazon basin including both taxonomic and phylogenetic diversity. We found strong regional differences in the signal of phylogenetic community structure with both overall and regional Net Relatedness Index and Nearest Taxon Index values found to be significantly positive leading to a pattern of phylogenetic clustering. Additionally, we found high taxonomic dissimilarity but low phylogenetic dissimilarity in pairwise community comparisons. These results suggest that recent diversification has played an important role in the assembly of white-sand forests causing geographic neo-endemism patterns at the regional scale.
ISSN: 0006-3606

hal-01532549
https://hal.archives-ouvertes.fr/hal-01532549
DOI : 10.1111/btp.12298
PRODINRA : 353398

Éditeur(s) : HAL CCSD Wiley
Résumé : International audience
ISSN: 0028-646X

hal-01092529
https://hal-agroparistech.archives-ouvertes.fr/hal-01092529

Éditeur(s) : HAL CCSD AGU and the Geochemical Society
Résumé : International audience
How reliable are shear wave splitting measurements as a means of determining mantle flow direction? This remains a topic of debate, especially in the context of subduction. The answer hinges on whether our current understanding of mineral physics provides enough to accurately translate between seismic observations and mantle deformation. Here, we present an integrated model to simulate strain-history-dependent texture development and estimate resulting shear wave splitting in subduction environments. We do this for a mantle flow model that, in its geometry, approximates the double-sided Molucca Sea subduction system in Eastern Indonesia. We test a single-sided and a double-sided subduction case. Results are compared to recent splitting measurements of this region by Di Leo et al. (2012a). The setting lends itself as a case study, because it is fairly young and, therefore, early textures from the slab's descent from the near surface to the bottom of the mantle transition zone--which we simulate in our models--have not yet been overprinted by subsequent continuous steady state flow. Second, it allows us to test the significance of the double-sided geometry, i.e., the need for a rear barrier to achieve trench-parallel subslab mantle flow. We demonstrate that although a barrier amplifies trench-parallel subslab anisotropy due to mantle flow, it is not necessary to produce trench-parallel fast directions per se. In a simple model of A-type olivine lattice-preferred orientation and one-sided subduction, trench-parallel fast directions are produced by a combination of simple shear and extension through compression and pure shear in the subslab mantle.
ISSN: 1525-2027

hal-01053506
https://hal.archives-ouvertes.fr/hal-01053506
DOI : 10.1002/2013GC005032

Éditeur(s) : HAL CCSD Geological Society of London
Résumé : International audience
The mylonitic Cambrian quartzites, Moine Thrust Zone, NW Scotland, have long been used to study microstructural and petrofabric evolution and to develop understanding of grain-scale processes accommodating large-scale displacements. Today, structural geology is entering a new age of understanding of the basic processes involved in microstructural evolution due to the emergence of novel instrumental techniques and theoretical models. It seems apposite therefore to re-evaluate the microstructure of one example of this classic quartz mylonite from the Stack of Glencoul, Assynt, using arguably the most important of these new techniques, electron backscattered diffraction (EBSD). The three-dimensional (3D) microstructure and petrofabric of this rock was analysed using EBSD, to: 1) corroborate previous optical and X-ray texture goniometry measurements; 2) investigate the potential for sampling and/or tectonic sectioning bias that may be introduced inadvertently into any petrofabric analysis; and 3) predict its seismic properties. It is found that microstructures do differ between orthogonal structural sections, leading to variations in strengths of different components in the overall petrofabric that might impact on seismic properties. The results emphasize the true 3D nature of microstructures and petrofabrics, which can be recognized and accommodated more readily by this new generation of analytical techniques.
Continental Tectonics and Mountain Building: The Legacy of Peach and Horne

hal-00565749
https://hal.archives-ouvertes.fr/hal-00565749

Éditeur(s) : HAL CCSD American Geophysical Union - AGU
Résumé : A large variety of high- and low temperature hydrothermal vents and associated ecosystems occurs on slow spreading ridges (Rona et al., 2010).
InterRidge News

hal-00685651
https://hal.archives-ouvertes.fr/hal-00685651

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Quartz is a common crustal mineral that deforms plastically in a wide range of temperatures and pressures, leading to the development of different types of crystallographic preferred orientation (CPO) patterns. In this contribution we present the results of an extensive modeling of quartz fabric transitions via a viscoplastic self-consistent (VPSC) approach. For that, we have performed systematic simulations using different sets of relative critical resolved shear stress of the main quartz slip systems. We have performed these simulations in axial compression and simple shear regimes under constant Von Mises equivalent strain of 100% (γ = 1.73), assuming that the aggregates deformed exclusively by dislocation glide. Some of the predicted CPOs patterns are similar to those observed in naturally and experimentally deformed quartz. Nevertheless, some classical CPO patterns usually interpreted as result from dislocation glide (e.g. Y-maxima due to prism < a > slip) are clearly not developed in the simulated conditions. In addition we reported new potential preferred orientation patterns that might happen in high temperature conditions, both in axial compression and simple shear. We have demonstrated that CPOs generated under axial compression are usually stronger that those predicted under simple shear, due to the continuous rotation observed in the later simulations. The fabric strength depends essentially on the dominant active slip system, and normally the stronger CPOs result from dominant basal slip in < a >, followed by rhomb < a > and prism [c] slip, whereas prism < a > slip does not produce strong fabrics. The opening angle of quartz [0001] fabric used as a proxy of temperature seems to be reliable for deformation temperatures of ~ 400 °C, when the main slip systems have similar behaviors.
ISSN: 0040-1951

hal-01115674
https://hal.archives-ouvertes.fr/hal-01115674
DOI : 10.1016/j.tecto.2014.08.011