Éditeur(s) : HAL CCSD
Résumé : National audience
Les semelles métamorphiques sont situées à la base desgrandes ophiolites obductées. Elles sont principalement composéesd’amphibolites (métabasaltes à amphiboles ± grenat,clinopyroxène, plagioclase) fortement cisaillées et dont les conditionsmaximum de métamorphisme sont estimées à 800±100Cet 1.0±0.2 GPa. Leur formation a lieu au cours des 2 Ma suivantl’initiation des zones de subduction. Ces amphibolites sont interprétéescomme des portions de lithosphère océanique subduite,portions qui sont métamorphisées, dis-je, à haute températurepar transfert de chaleur depuis le coin de manteau sus-jacent quiformera la base de l’ophiolite obductée. Leur importante déformationau pic de métamorphisme est interprétée comme synchroneà leur accrétion au manteau de la plaque supérieure. Les semellesmétamorphiques sont donc des témoins directs de la dynamiqueprécoce des zones de subduction océanique. Leur pétrologie etleur déformation fournissent des contraintes majeures, et rares,sur l’évolution de la structure thermique et sur le comportementmécanique de l‘interface de subduction naissante. Cette étudeprésente des données structurales à plusieurs échelles, couplant desanalyses de terrain aux analyses EBSD sur des échantillons à amphibole± plagioclase ± clinopyroxene ± grenat de la semelle métamorphique.Les grains d’amphibole et de plagioclase sont caractériséspar une forte orientation préférentielle parallèle à la foliationet à la linéation. Cette fabrique est accompagnée par une forteorientation cristallographique préférentielle des amphiboles marquéepar un axe [001] marquant la linéation et la normale au plan(001) perpendiculaire à la foliation. Les plagioclases montrentune orientation cristallographique préférentielle faible voire nulle.Cette fabrique est similaire à celle observée dans les amphibolitescisaillées de base de croûte continentale. Les clinopyroxèneset les grenats présentent des degrés d’orientation intermédiaires.Ces deux phases forment des boudins dont l’axe long est orientéparallèlement à la foliation. Les porphyroclastes de clinopyroxèneprésentent une extinction ondulante et le développement de sousgrainsà leur périphérie. Les clinopyroxènes et les grenats agissentdonc comme phases ” dures ”, augmentant la résistance de laroche à la déformation. À l’initiation de la subduction, la partiesupérieure de la plaque plongeante est affectée par l’augmentationprogressive du degré de métamorphisme. Ceci entraîne une fortedéshydratation et la cristallisation de phases ” faibles ” (quartz,amphibole, plagioclase) et ” fortes ” (clinopyroxene, grenat). Larhéologie de l’interface de la subduction en est fortement affectée.Les unités de la semelle métamorphique (avec des minéralogies etdes conditions P-T-t différentes) accrétées aux péridotites de laplaque supérieure témoignent de changements rhéologiques majeuresà l’interface de la subduction au cours de l’histoire précocedes zones de subduction.
RST 2016, livre des résumés
Caen, France

insu-01388730
https://hal-insu.archives-ouvertes.fr/insu-01388730

Éditeur(s) : HAL CCSD Wiley-Blackwell
Résumé : International audience
The Lanzo peridotite massif is a fragment of oceanic lithosphere generated in an ocean-continent transition context and eclogitized during alpine collision. Despite the subduction history, the massif has preserved its sedimentary oceanic cover, suggesting that it may have preserved its oceanic structure. It is an exceptional case for studying the evolution of a fragment of the lithosphere from its oceanization to its subduction and then exhumation. We present a field and petrological study retracing the different serpentinization episodes and their impact on the massif structure. The Lanzo massif is composed of slightly serpentinized peridotites (<20% serpentinization) surrounded by an envelope of foliated serpentinites (100% serpentinization) bordered by oceanic metabasalts and metasedimentary rocks. The limit between peridotites and serpentinites defines the front of serpentinization. This limit is sharp: it is marked by the presence of massive serpentinites (80% serpentinization) and, locally, by dykes of metagabbros and mylonitic gabbros. The deformation of these gabbros is contemporaneous with the emplacement of the magma. The presence of early lizardite in the peridotites testifies that serpentinization began during the oceanization, which is confirmed by the presence of meta-ophicarbonates bordering the foliated serpentinite envelope. Two additional generations of serpentine occur in the ultramafic rocks. The first is a prograde antigorite that partially replaced the lizardite and the relict primary minerals of the peridotite during subduction, indicating that serpentinization is an active process at the ridge and in the subduction zone. Locally, this episode is followed by the deserpentinization of antigorite at peak P-T (estimated in eclogitized metagabbros at 2-2.5 GPa and 550-620 °C): it is marked by the crystallization of secondary olivine associated with chlorite and/or antigorite and of clinopyroxene, amphibole and chlorite assemblages. A second antigorite formed during exhumation partially to completely obliterating previous textures in the massive and foliated serpentinites. Serpentinites are an important component of the oceanic lithosphere generated in slow to ultraslow spreading settings, and in these settings, there is a serpentinization gradient with depth in the upper mantle. The seismic Moho limit could correspond to a serpentinization front affecting the mantle. This partially serpentinized zone constitutes a less competent level where, during subduction and exhumation, deformation and fluid circulation are localized. In this zone, the reaction kinetics are increased and the later steps of serpentinization obliterate the evidence of this progressive zone of serpentinization. In the Lanzo massif, this zone fully recrystallized into serpentinite during alpine subduction and collision. Thus, the serpentinite envelope represents the oceanic crust as defined by geophysicists, and the sharp front of serpentinization corresponds to an eclogitized seismic palaeo-Moho.
ISSN: 0263-4929

hal-00823051
https://hal.archives-ouvertes.fr/hal-00823051
DOI : 10.1111/jmg.12008

Éditeur(s) : HAL CCSD Oxford University Press (OUP)
Résumé : International audience
At Cima di Gagnone, garnet peridotite and chlorite harzburgite lenses within pelitic schists and gneisses correspond to eclogite-facies breakdown products of hydrated peridotites and are suitable for studying dehydration of serpentinized mantle. Thermobarometry and pseudosection modelling yield peak temperatures of 750-850°C and pressures <3 GPa. The minimum temperature recorded by the garnet peridotite corresponds to the maximum conditions experienced by the chlorite harzburgite, suggesting that these rocks recrystallized cofacially at ∼800°C. Alternatively, they might have decoupled during subduction, as achieved in tectonically active plate interface boundaries. The major and rare earth element (REE) variability of the peridotites was mostly acquired during pre-subduction mantle evolution as a result of partial melting and reactive melt flow. The ultramafic suite is also characterized by fluid-mobile element enrichments (B, Pb, As, Sb, Cs, Li, U, Be), which confirm derivation from variably serpentinized protoliths. Similarity in the U, Pb, B, Li and Sr contents of the Gagnone peridotites to present-day oceanic serpentinites suggests that these elements were partly taken up during initial serpentinization by seawater-derived fluids. Positive Be, As and Sb anomalies suggest involvement of fluids equilibrated with crustal (metasedimentary) reservoirs during subsequent subduction metamorphism and peridotite entrainment in (meta)sediments. Fluid-mobile element enrichment characterizes all peak eclogitic minerals, implying that multiple hydration events and element influx pre-dated the eclogite-facies dehydration. Peak anhydrous minerals retain B, Li, As and Sb concentrations exceeding primitive mantle values and may introduce geochemical anomalies into the Earth's mantle. The relatively low contents of large ion lithophile elements and light REE in the Gagnone peridotites with respect to much higher enrichments shown by metasomatized garnet peridotite pods hosted in migmatites (Ulten Zone, Eastern Alps) suggest that the crustal rocks at Gagnone did not experience partial melting. The Gagnone garnet peridotite, despite showing evidence for chlorite dehydration, retains significant amounts of fluid-mobile elements documenting that no partial melting occurred upon chlorite breakdown. We propose that the Gagnone ultramafic rocks represent a prime example of multi-stage peridotite hydration and subsequent dehydration in a plate interface setting.
ISSN: 0022-3530

hal-01054319
https://hal.archives-ouvertes.fr/hal-01054319
DOI : 10.1093/petrology/egt068

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The Cerro del Almirez massif (Nevado–Filábride Complex, Betic Cordillera, SE Spain) is composed of antigorite (Atg-) serpentinite and chlorite (Chl-) harzburgite separated by a thin reaction front formed in a palaeo-subduction setting. These ultramafic rocks preserve unique prograde structures related to the pre- and peak high-pressure event (1.6–1.9 GPa and 680–710 °C). The oldest subduction-related structures are preserved in Atg-serpentinites: a penetrative S1 foliation and associated L1 stretching lineation that formed in a non-coaxial regime with a top-to-the-W sense of shear. This planar–linear fabric is crosscut by olivine ± Ti-clinohumite veins, formed during the prograde breakdown of brucite and pre-metamorphic clinopyroxene, which form a system of veins decimetres long. They record embrittlement processes due to the release of 6 vol.% of H2O associated with brucite dehydration. The growth of prograde olivine and/or tremolite porphyroblasts is syn- to post-kinematic in relation to the S1 foliation. Further reactions at higher temperature related to the complete breakdown of the Atg (i.e. Atg-out) are post-kinematic to S1. Prograde Chl-harzburgite is crosscut by sets of conjugate zones associated with grain-size reduction of olivine grains. These grain-size reduction zones are interpreted as brittle structures generated by hydrofracturing due to overpressure fluids in a compressional setting at low-differential stresses.Structures related to the exhumation process are mainly preserved in the metasedimentary host rock, where an S2/L2 planar–linear fabric developed within a shear zone dominated by a non-coaxial regime with a top-to-the-W sense of movement in a transpressional regime. Peak metamorphic conditions deduced for the schists are similar in pressure (1.3–1.9 GPa) but lower in temperature (560–590 °C) compared to the ultramafic rocks in contact with them, suggesting a major shear zone at the base of the ultramafic massif during D2 deformation in a right-handed transpressional regime.
ISSN: 0040-1951

hal-01172303
https://hal.archives-ouvertes.fr/hal-01172303
DOI : 10.1016/j.tecto.2014.12.022

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The Tso Morari serpentinites in the Ladakh area, northwest Himalaya, originated from the forearc mantle overlying the northward subducting Neo-Tethys lithosphere and the margin of the Indian continent. The serpentinites are characterized by high concentration of fluid-mobile elements (FME: As, Sb, B, Li, and U) compared to ophiolitic or abyssal serpentinites. The Pb isotopic compositions of serpentinites show influence of the subducted Indian continental lithosphere. Trace element concentrations of antigorite determined in situ with Laser Ablation High Resolution Inductively Coupled Mass Spectrometer (LA-HR-ICP-MS) show high contents of FME including Pb, in contrast to the spatially associated iron oxides. Rare earth elements (REE) and compatible elements, such as Sc and Co, remained immobile during the hydration, allowing the identification of the primary minerals (olivine or orthopyroxene) from which serpentine formed. Serpentinized olivine displays higher Sb and As concentrations (up to 1000 x PM) than serpentinized orthopyroxenes that are enriched in Pb, Cs and Li (2 to up to 10 x PM).;We propose that the observed FME distribution in two types of serpentine reflect the differential incorporation of FME during the downward movement of the serpentinite along the subduction plane. At temperature lower than 400 degrees C, at shallow depths, olivine is preferentially serpentinized and incorporates elements that are fluid soluble at low temperatures, such as Sb and As. Above 400 degrees C, orthopyroxene is hydrated and incorporates Pb, Cs, Li and possibly Ba. Boron and U are incorporated in both types of serpentine suggesting that they are released from slabs at temperatures around 300-400 degrees C. The serpentine acts as a sink for water, but also for FME and transports them to deeper and hotter levels in the mantle, down to the isotherm 600-650 degrees C where dehydration occurs.
ISSN: 0009-2541

hal-00475565
https://hal.archives-ouvertes.fr/hal-00475565
DOI : 10.1016/j.chemgeo.2009.10.002

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The southernmost part of the Ryukyu subduction, where the Philippine Sea Plate is subducting under the Eurasian Plate, is known to be a very seismically active region of transition from a north-dipping subduction along the Ryukyu subduction to an ~ SE-NW collision along the Taiwanese orogenic wedge. In this paper, we will focus on the Ryukyu forearc area close to Taiwan where the deformation is paroxysmal. In order to decipher the nature of the seismic deformation in this region, a three month passive experiment, combining 22 Ocean Bottom Seismometers and 51 onland stations, has been led. Starting from an a-priori heterogeneous model, we have obtained 801 well-located earthquake hypocenters, a precise P-wave tomography model and 14 focal mechanisms. The seismicity along the Ryukyu forearc is mainly located not only in the vicinity of the Interplate Seismogenic Zone (ISZ) but also within both the subducting PSP and the overriding plate. Seismicity within the upper-plate is essentially localized east of Nanao basin where NW-SE extension occurs, and northwest of the Hoping basin where strike-slip dominates. As revealed by both the P-wave velocity structure and the newly derived seismicity, we argue that a sub-vertical step offsetting the subducting PSP around 10 km may support the presence of a trench-parallel tear. The PSP also undergoes extension in its upper part that is probably caused by buckling and slab pull. The P-wave velocity structure reveals three other major features: (1) a continuity between the Central Range and the Ryukyu Arc with a shallower Moho (~ 30 km depth) between ~ 122.3°N and ~ 122.5°N along the Ryukyu Arc, (2) high P-wave velocities along the eastern side of the Central Range and, (3) two bodies with similar high crustal velocities (6.5-7.0 km/s) at 12-18 km depths, embedded within the Ryukyu arc basement, just north of Hoping Basin and north of the Nanao Basin.
ISSN: 0040-1951

hal-00795521
https://hal.archives-ouvertes.fr/hal-00795521
DOI : 10.1016/j.tecto.2012.04.011

Éditeur(s) : HAL CCSD American Geophysical Union (AGU)
Résumé : International audience
Sandbox modeling is used to study the deformation of accretionary wedges caused by the subduction of oceanic ridges. The first experiment incorporates a massive ridge within a sand wedge. The wedge thickens and shortens when the forward propagation of the basal decollement ceases. The wedge thickening results in taper change, reactivation of preexisting thrusts, and retreat of the frontal part of the sand wedge. Similar mechanisms may have affected some margins that have undergone ridge subduction such as the Tonga margin after the subduction of the oblique Louisville oceanic ridge. The second experiment shows the effects of an active basement thrust slice as it enters a subduction zone. This process may have happened in the eastern Nankai accretionary wedge. Initially, the wedge in this experiment behaved similarly to that of the first experiment. Rapidly the topographic slope changed, the wedge thickened above the basement slice generating a slope break in the topography; a deeper propagating accretionary wedge again characterized by a small taper developed. These results, when compared with observations made in the Eastern Nankai Trench, are in agreement with the past subduction of a basement thrust slice in this area.
ISSN: 0278-7407

hal-01261549
https://hal.archives-ouvertes.fr/hal-01261549
https://hal.archives-ouvertes.fr/hal-01261549/document
https://hal.archives-ouvertes.fr/hal-01261549/file/Lallemand_et_al-1992-Tectonics.pdf
DOI : 10.1029/92TC00637

Éditeur(s) : Elsevier Science Bv
Résumé : We present the results from a new grid of deep penetration multichannel seismic (MCS) profiles over the 280-km-long north-central segment of the Lesser Antilles subduction zone. The 14 dip-lines and 7 strike-lines image the topographical variations of (i) the subduction interplate décollement, (ii) the top of the arcward subducting Atlantic oceanic crust (TOC) under the huge accretionary wedge up to 7 km thick, and (iii) the trenchward dipping basement of the deeply buried forearc backstop of the Caribbean upper plate. The four northernmost long dip-lines of this new MCS grid reveal several-kilometres-high topographic variations of the TOC beneath the accretionary wedge offshore Guadeloupe and Antigua islands. They are located in the prolongation of those mapped on the Atlantic seafloor entering subduction, such as the Barracuda Ridge. This MCS grid also provides unexpected evidences on huge along-strike topographical variation of the backstop basement and of the deformation style affecting the outer forearc crust and sediments. Their mapping clearly indicates two principal areas of active deformation in the prolongation of the major Barracuda and Tiburon ridges and also other forearc basement highs that correspond to the prolongation of smaller oceanic basement highs recently mapped on the Atlantic seafloor. Although different in detail, the two main deforming forearc domains share similarities in style. The imaged deformation of the sedimentary stratification reveals a time- and space-dependent faulting by successive warping and unwarping, which deformation can be readily attributed to the forearc backstop sweeping over the two obliquely-oriented elongated and localized topographical ridges. The induced faulting producing vertical scarps in this transport does not require a regional arc-parallel extensional regime as proposed for the inner forearc domain, and may support a partitioned tectonic deformation such as in the case of an outer forearc sliver. A contrasted reflectivity of the sedimentary layering at the transition between the outer forearc and accretionary domains was resolved and used to define the seaward edge of the outer forearc basement interpreted as being possibly a proxy to the updip limit of the interplate seismogenic zone. Its mapping documents along-arc variations of some tens of kilometres the subduction backstop with respect to the negative gravity anomaly commonly taken as marking the subduction trench. With the exception of the southernmost part, the newly mapped updip limit reaches 25 km closer to the trench, thus indicating a possible wider seismogenic zone over almost the whole length of the study area.
Tectonophysics (0040-1951) (Elsevier Science Bv), 2013-09 , Vol. 603 , P. 32-54

Droits : 2013 Elsevier B.V. All rights reserved
http://archimer.ifremer.fr/doc/00139/25003/23109.pdf
DOI:10.1016/j.tecto.2013.05.028
http://archimer.ifremer.fr/doc/00139/25003/

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The Paleozoic-early Mesozoic geology of Tibet was controlled by the rift-drift, seafloor spreading and subduction zone tectonics of a Paleo-Tethyan realm, which evolved between the West Cathaysides (WC) and the East Cimmerides (EC). Different suture zones with ophiolites and ophiolitic mélanges, high-pressure metamorphic belts, magmatic arcs and accretionary prism complexes separating different terranes mark multiple subduction-accretion systems within this Paleo-Tethyan domain, reminiscent of the modern Western Pacific Ocean. Discrete basins separated by different continental blocks and magmatic arcs constituted a complex paleogeography of Paleo-Tethys, and these oceanic strands were closed as a result of subduction with different polarities during the late Paleozoic-Triassic. The Longmu Tso Shuanghu-Changning Menglian Suture zone (LS-CMS) in Tibet represents the main tectonic boundary between the WC and EC that developed in the Devonian. The East Kunlun-A’nyemaqen oceanic slab was subducted northward beneath the East Kunlun terrane in northern Tibet, whereas the Sumdo oceanic slab was subducted northward beneath the South Qiangtang-North Lhasa terrane in southern Tibet. The Longmu Tso Shuanghu-Changning Menglian and Jinshajiang-Ailaoshan-Song Ma ophiolites were developed and emplaced in subduction-accretion systems with opposite polarities (westward and eastward) beneath the North Qiangtang-Qamdo-Simao-Indochina terrane in central Tibet. The Jinshajiang-Ailaoshan-Song Ma oceanic slab was subducted westward beneath the North Qiangtang-Simao-Indochina terrane along the Jinshajiang and Ailaoshan-Song Ma trenches in a trench-ridge-trench triple junction plate configuration. The Emeishan mantle plume produced a large Permian basaltic terrane, developed on the western passive margin of the South China block. The final closure of the Paleo-Tethyan oceanic branches resulted in continental collisions and development of a vast Indosinian orogenic collage in the latest Triassic-Jurassic.
ISSN: 0743-9547

insu-01119604
https://hal-insu.archives-ouvertes.fr/insu-01119604
https://hal-insu.archives-ouvertes.fr/insu-01119604/document
https://hal-insu.archives-ouvertes.fr/insu-01119604/file/Xu-JAES-2015.pdf
DOI : 10.1016/j.jseaes.2015.01.021

Éditeur(s) : Oxford Univ Press
Résumé : In subduction zones, melting and dehydration of the subducted slab introduce material into the mantle wedge and modify its chemical and isotopic composition. As a consequence, island arc lavas differ significantly from mid-ocean ridge basalts and ocean island basalts. In some arcs, the composition of lavas is strongly influenced by the sedimentary material introduced with the slab; in others, magma composition is mainly affected by aqueous fluids released by the slab. The Lesser Antilles arc is known for its extreme continental-crust-like signature but for some Lesser Antilles lavas subducted sediments are barely involved and enrichment in fluid-mobile elements (Ba, U, Sr, Pb, etc.) is the dominant feature. Here we evaluate whether La/Sm is a quantitative proxy of sediment involvement in volcanic arcs, and we relate dehydration and melting processes to the temperature and pressure conditions of the slab. We use Martinique as a case study because in this island both dehydration and sediment melting fingerprints coexist. We measured major and trace elements for about 130 age-constrained samples, carefully chosen to cover all volcanic phases of Martinique (25 Ma to present). Using these results we demonstrate that: (1) weathering does not modify the La/Sm ratio; (2) fractional crystallization of amphibole and/or garnet does not increase La/Sm by more than 20%; (3) rare earth element transfer from wall-rock to magma during fractionation is not significant; (4) melting of the mantle source increases La/Sm by only about 20%. As a consequence, we show that the proportion of slab sediment incorporated in the mantle wedge controls the La/Sm ratio of the source. The observed correlations between La/Sm and Nd and Hf isotopic compositions indicate that the effect of sediment addition is the overwhelming factor: La/Sm is a good proxy for slab sediment proportion in Martinique. We observe a geographical gradient between slab dehydration and sediment melting on the island. Whereas lavas located on the western side of the island display a clear sedimentary input in their source, lavas located on the eastern side of the island, closer to the trench, are clearly influenced by dehydration of the subducted slab. In addition, the aqueous fluids clearly come from the subducted basalt and they did not interact with the overlying sediments. The influence of sediment added to the source of the magmas increases from the eastern part to the western part of the island. We relate this geographical change to the pressure and temperature conditions at the slab surface. Sediments probably cross their solidus under Martinique and hydrous melting is triggered. Finally, we show that under all volcanic arcs where the signature of sediments overwhelms the signature of fluids, the slab surface reaches P-T conditions that allow the subducted sediments to melt. Inversely, under most volcanic arcs where the signal of aqueous fluids dominates over sediment melts, the subducted slab is not hot enough for the sedimentary pile to melt.
Journal Of Petrology (0022-3530) (Oxford Univ Press), 2012-12 , Vol. 53 , N. 12 , P. 2441-2464

Droits : info:eu-repo/semantics/openAccess
http://archimer.ifremer.fr/doc/00113/22392/20234.pdf
DOI:10.1093/petrology/egs055
http://archimer.ifremer.fr/doc/00113/22392/

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
We analyze in this study a new set of marine data including 3D local tomography, 1992-2008 relocated earthquakes and two recent multichannel seismic lines to characterize the deformation style in the collision area offshore east Taiwan. We have mapped in detail the Mohos of the converging plates as well as the subduction interface with a resolution never reached before. We show that the sharp continental subduction of the Eurasia plate, beneath the middle part of the Central Range, indents the Philippine Sea plate (PSP) as attested by intra-oceanic slicing and incipient subduction of the PSP beneath the east coast of Taiwan. The westernmost part of the PSP slab is probably experiencing a beginning of break-off as attested by NW-trending en-échelon shear zones beneath the southern slope of the southern Ryukyu arc (SRA). These en-échelon shear zones have a sinistral component favored by the "collision-free" subduction of the PSP north of 24°30′N. The down-faulting of the subduction interface forms ramps along which earthquakes clusterize. Three M7 subduction earthquakes occurred offshore Suao city along these ramps with a recurrence interval of about 40 years: 1920 Mw7.7, 1963 Mw7.2 and 2002 Mw7.1 events. The 1966 Mw6.0-7.5 earthquakes sequence likely outlines a WNW-ESE left-lateral intra-slab shear zone. The SRA upper plate accommodates the complex geometry and deformation of the subducting PSP through seismic deformation. Shallow high velocities fringing the Luzon volcanic arc (LVA) beneath the Longitudinal Valley and north of the southernmost Ryukyu forearc basins are interpreted as relics of the LVA forearc basement squeezed in the collision zone. Based on the accommodation of a large part of the convergence through shortening within the PSP and the subsequent segmentation of the shallow subduction interface, we consider that the nucleation of a Mw ≥ 8 earthquake along the southernmost Ryukyu megathrust is unlikely.
ISSN: 0040-1951

hal-00853365
https://hal.archives-ouvertes.fr/hal-00853365
https://hal.archives-ouvertes.fr/hal-00853365/document
https://hal.archives-ouvertes.fr/hal-00853365/file/publallemandifremer.pdf
DOI : 10.1016/j.tecto.2013.03.020

Éditeur(s) : HAL CCSD Wiley-Blackwell
Résumé : International audience
Physical modeling of oblique subduction is performed to study the mechanism of strain partitioning. The model is two-layer and includes the elasto-plastic lithosphere (the overriding and subducting plates) and the low-viscosity liquid asthenosphere. The subduction is driven by a push force from a piston and a pull force when the density contrast Ap between the subducting plate and the asthenosphere is positive. We vary both Ap and the interplate friction (frictional stresses). Slip partitioning is obtained only in the models with high interplate friction and only when the overriding plate contains a weak zone. This zone in the models corresponds either to locally thinned litho-sphere or to cut (fault). The horizontal, trench-normal component of the interplate friction force [Ffh[ can be comparable with the absolute value of the horizontal component of the nonhydrostatic interplate pressure force [Fph [ in the subduction zone. Ffh is always negative (compression), while Fph can be either negative (compressional subduction regime) or positive (extensional regime). High friction, which promotes partitioning, can completely cancel the extensional (suction) force Fph. Back arc tension and strike-slip faulting appear thus as conflicting processes, although they can coexist in the same subduction zone, depending on the relative values of relevant forces. It appears that high friction can exist only in compressional subduction zones where partitioning should develop more easily. This conclusion is supported by the comparison of two oblique subduction zones, having similar geometry: the compressional southern Kurile zone (strong partitioning) and extensional southern Ryukyu zone (no lithospheric-scale partitioning). Other factors controlling the strain partitioning are the length of the oblique subductlon zone, the boundary conditions at the transverse limits of the forearc sliver, and of course, the obliquity of subduction.
ISSN: 2169-9275

hal-01261396
https://hal.archives-ouvertes.fr/hal-01261396
https://hal.archives-ouvertes.fr/hal-01261396/document
https://hal.archives-ouvertes.fr/hal-01261396/file/chemendaJGR2000.pdf
DOI : 10.1029/1999JB900332

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Serpentinites form by hydration of mantle peridotite and constitute the largest potential reservoir of fluid-mobile elements entering subduction zones. Isotope ratios of one such element, boron, distinguish fluid contributions from crustal versus serpentinite sources. Despite 85% of boron hosted within abyssal peridotite being lost at the onset of subduction at the lizardite-to-antigorite transition, a sufficient cargo of boron to account for the composition of island arc magma is retained (c. 7 μg g− 1, with a δ11B of + 22‰) until the down-going slab reaches the antigorite-out isograd. At this point a 11B-rich fluid, capable of providing the distinctive δ11B signature of island arc basalts, is released. Beyond the uniquely preserved antigorite-out isograd in serpentinites from Cerro del Almirez, Betic Cordillera, Spain, the prograde lithologies (antigorite–chlorite–orthopyroxene–olivine serpentinite, granofels-texture chlorite-harzburgite and spinifex-texture chlorite-harzburgite) have very different boron isotope signatures (δ11B = − 3 to + 6‰), but with no significant difference in boron concentration compared to the antigorite-serpentinite on the low P–T side of the isograd. 11B-rich fluid, which at least partly equilibrated with pelagic sediments, is implicated in the composition of these prograde lithologies, which dehydrated under open-system conditions. Serpentinite-hosted boron lost during the early stages of dehydration is readily incorporated into forearc peridotite. This, in turn, may be dragged to sub-arc depths as a result of subduction erosion and incorporated in a mélange comprising forearc serpentinite, altered oceanic crust and pelagic sediment. At the antigorite-out isograd it dehydrates, thus potentially providing an additional source of 11B-rich fluids.
ISSN: 0009-2541

hal-01172276
https://hal.archives-ouvertes.fr/hal-01172276
DOI : 10.1016/j.chemgeo.2014.03.015

Éditeur(s) : HAL CCSD
Résumé : International audience
As subducting plates reach the base of the upper mantle, some appear to flatten and stagnate, while others seemingly go through unimpeded. This variable resistance to slab sinking has been proposed to affect long-term thermal and chemical mantle circulation. A review of observational constraints and dynamic models highlights that neither the increase in viscosity between upper and lower mantle (likely by a factor 20–50) nor the coincident endothermic phase transition in the main mantle silicates (with a likely Clapeyron slope of –1 to –2 MPa/K) suffice to stagnate slabs. However, together the two provide enough resistance to temporarily stagnate subducting plates, if they subduct accompanied by significant trench retreat. Older, stronger plates are more capable of inducing trench retreat, explaining why backarc spreading and flat slabs tend to be associated with old-plate subduction. Slab viscosities that are ∼2 orders of magnitude higher than background mantle (effective yield stresses of 100–300 MPa) lead to similar styles of deformation as those revealed by seismic tomography and slab earthquakes. None of the current transition-zone slabs seem to have stagnated there more than 60 m.y. Since modeled slab destabilization takes more than 100 m.y., lower-mantle entry is apparently usually triggered (e.g., by changes in plate buoyancy). Many of the complex morphologies of lower-mantle slabs can be the result of sinking and subsequent deformation of originally stagnated slabs, which can retain flat morphologies in the top of the lower mantle, fold as they sink deeper, and eventually form bulky shapes in the deep mantle.
ISSN: 1553-040X

hal-01571965
https://hal.archives-ouvertes.fr/hal-01571965
DOI : 10.1130/GES01476.1

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Although subducting slabs undergo a bending deformation that resists tectonic plate motions, the magnitude of this resistance is not known because of poor constraints on slab strength. However, because slab bending slows the relatively rapid motions of oceanic plates, observed plate motions constrain the importance of bending. We estimated the slab pull force and the bending resistance globally for 207 subduction zone transects using new measurements of the bending curvature determined from slab seismicity. Predicting plate motions Using a global mantle flow model, we constrain the viscosity of the bending slab to be at most similar to 300 times more viscous than the upper mantle: stronger slabs are intolerably slowed by the bending deformation. Weaker slabs, however, cannot transmit a pull force sufficient to explain rapid trenchward plate motions unless slabs stretch faster than seismically observed rates of similar to 10(-15) s(-1). The constrained bending viscosity (similar to 2 x 10(23) Pa s) is larger than previous estimates that yielded similar or larger bending resistance (here similar to 25% of forces). This apparent discrepancy occurs because slabs bend more gently than previously thought, with an average radius of curvature of 390 km that permits subduction Of Strong slabs. This gentle bending may ultimately permit plate tectonics on Earth.
ISSN: 0012-821X

hal-00412383
https://hal.archives-ouvertes.fr/hal-00412383
DOI : 10.1016/j.epsl.2008.05.009

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Subduction processes play a major role in plate tectonics and the subsequent geological evolution of Earth. This special issue focuses on ongoing research in subduction dynamics to a large extent (oceanic subduction, continental subduction, obduction…) for both past and active subduction zones and into mountain building processes and the early evolution of orogens. It puts together various approaches combining geophysics (imaging of subduction zones), petrology/geochemistry (metamorphic analysis of HP-UHP rocks, fluid geochemistry and magmatic signal, geochronology), seismology and geodesy (present-day evolution of subduction zones, active tectonics), structural geology (structure and evolution of mountain belts), and numerical modelling to provide a full spectrum of tools that can be used to constrain the nature and evolution of subduction processes and orogeny. Studies presented in this special issue range from the long-term (orogenic cycle) to short-term (seismic cycle).
ISSN: 0264-3707

insu-01287985
https://hal-insu.archives-ouvertes.fr/insu-01287985
https://hal-insu.archives-ouvertes.fr/insu-01287985/document
https://hal-insu.archives-ouvertes.fr/insu-01287985/file/rolland-2016.pdf
DOI : 10.1016/j.jog.2016.03.006

Éditeur(s) : HAL CCSD Oxford University Press (OUP)
Résumé : International audience
Convergent plate margins typically experience a transition from subduction to collision dynamics as massive continental blocks enter the subduction channel. Studies of high-pressure rocks indicate that tectonic fragments are rapidly exhumed from eclogite facies to mid-crustal levels, but the details of such dynamics are controversial. To understand the dynamics of a subduction channel we report the results of a petrochronological study from the central Sesia Zone, a key element of the internal Western Alps. This comprises two polymetamorphic basement complexes (Eclogitic Micaschist Complex and Gneiss Minuti Complex) and a thin, dismembered cover sequence (Scalaro Unit) associated with pre-Alpine metagabbros and metasediments (Bonze Unit). Structurally controlled samples from three of these units (Eclogitic Micaschist Complex and Scalaro-Bonze Units) yield unequivocal petrological and geochronological evidence of two distinct high-pressure stages. Ages (U-Th-Pb) of growth zones in accessory allanite and zircon, combined with inclusion and textural relationships, can be tied to the multi-stage evolution of single samples. Two independent tectono-metamorphic 'slices' showing a coherent metamorphic evolution during a given time interval have been recognized: the Fondo slice (which includes Scalaro and Bonze rocks) and the Druer slice (belonging to the Eclogitic Micaschist Complex). The new data indicate separate stages of deformation at eclogite-facies conditions for each recognized independent kilometer-sized tectono-metamorphic slice, between ∼85 and 60 Ma, with evidence of intermittent decompression (ΔP ∼ 0*5 GPa) within only the Fondo slice. The evolution path of the Druer slice indicates a different P-T-time evolution with prolonged eclogite-facies metamorphism between ∼85 and 75 Ma. Our approach, combining structural, petrological and geochronological techniques, yields field-based constraints on the duration and rates of dynamics within a subduction channel.
ISSN: 0022-3530

hal-01054335
https://hal.archives-ouvertes.fr/hal-01054335
DOI : 10.1093/petrology/egu029

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
Using first principle simulations we calculated the elasticity of chlorite. At a density ρ~ 2.60 g cm−3, the elastic constant tensor reveals significant elastic anisotropy: VP ~27%, VS1 ~56%, and VS2 ~43%. The shear anisotropy is exceptionally large for chlorite and enhances upon compression. Upon compression, the shear elastic constant component C44 and C55 decreases, whereas C66 shear component stiffens. The softening in C44 and C55 is reflected in shear modulus, G, and the shear wave velocity, VS. Our results on elastic anisotropy at conditions relevant to the mantle wedge indicates that a 10-20 km layer of hydrated peridotite with serpentine and chlorite could account for the observed shear polarization anisotropy and associated large delay times of 1-2 s observed in some subduction zone settings. In addition, chlorite could also explain the low VP/VS ratios that have been observed in recent high-resolution seismological studies.
ISSN: 0094-8276

hal-01053707
https://hal.archives-ouvertes.fr/hal-01053707
https://hal.archives-ouvertes.fr/hal-01053707/document
https://hal.archives-ouvertes.fr/hal-01053707/file/Mookherjee_et_al-2014-Geophysical_Research_Letters.pdf
DOI : 10.1002/2014GL059334

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Past studies have shown that high coastal uplift rates are restricted to active areas, especially in a subduction context. The origin of coastal uplift in subduction zones, however, has not yet been globally investigated. Quaternary shorelines correlated to the last interglacial maximum (MIS 5e) were defined as a global tectonic benchmark (Pedoja et al. (2011)). In order to investigate the relationships between the vertical motion and the subduction dynamic parameters, we cross-linked this coastal uplift database with the "geodynamical" databases from Heuret (2005), Conrad and Husson (2009) and Müller et al. (2008). Our statistical study shows that: [1] the most intuitive parameters one can think responsible for coastal uplift (e.g., subduction obliquity, trench motion, oceanic crust age, interplate friction and force, convergence variation, dynamic topography, overriding and subducted plate velocity) are not related with the uplift (and its magnitude); [2] the only intuitive parameter is the distance to the trench which shows in specific areas a decrease from the trench up to a distance of ~300 km; [3] the slab dip (especially the deep slab dip), the position along the trench and the overriding plate tectonic regime are correlated with the coastal uplift, probably reflecting transient changes in subduction parameters. Finally we conclude that the first order parameter explaining coastal uplift is small-scale heterogeneities of the subducting plate, as for instance subducting aseismic ridges. The influence of large-scale geodynamic setting of subduction zones is secondary.
ISSN: 0264-3707

hal-00968538
https://hal.archives-ouvertes.fr/hal-00968538
https://hal.archives-ouvertes.fr/hal-00968538/document
https://hal.archives-ouvertes.fr/hal-00968538/file/henryterraces_v2.pdf
DOI : 10.1016/j.jog.2014.04.001

Éditeur(s) : HAL CCSD Elsevier Masson
Résumé : In Vietnam, the Triassic Indosinian collision affected coevally the Truong Son belt and the Kontum Massif,which were not independent tectonic units, but parts of the same Gondwana-derived Indochina continental block. This thermotectonic event took place synchronously throughout Vietnam, during the Lower Triassic 250-240-Ma time interval, as demonstrated by numerous geochronological data, combining Ar-Ar and U-Pb dating methods. Structural and kinematic investigations, in the Indosinian metamorphic rocks, reveal that the collisional process resulted from a consistent northwest-striking convergence of Indochina with respect to the adjacent blocks. It is suggested that this motion was taken up by a pair of opposite subduction zones: to the north, beneath South China, and to the west, beneath western Indochina, along the Song Ma and Po Ko sutures, respectively. Tectonic markers, calc-alkaline subduction-related volcanism and granitic intrusions and the generation of high-pressure rocks that have been recently discovered support this geodynamic setting, at least along Po Ko. Along the northwest-trending Song Ma zone, the obliquity of the convergence during subduction and subsequent collision resulted in the development, within the Truong Son Belt, of a set of subparallel dextral mylonitic shear zones, under amphibolite-facies metamorphism. The intermediate segments remained weakly metamorphic or even almost devoid of metamorphism. Along Po Ko, the convergence was near-orthogonal, with a left-lateral strike-slip component; the ongoing continental subduction resulted in the reworking of the Kontum granulitic basement and the development of Indosinian HP granulitic conditions; the subsequent extension-related exhumation operated approximately in the same northwestwards direction. This Indosinian evolution, applied on a continental crust that had been probably affected, as in South China, by a Caledonian-related event, as judged by the general unconformity of the Lower Devonian sediments, the widespread occurrence of magmatic crystallisation ages of ca 450 Ma (Ordovician-Silurian), and by the approximately similar age of the primary granulitic episode in the Kontum Massif. The similarities of the Devonian facies over central, northern Vietnam and South China imply a land connection, possibly as a consequence of a Caledonian collision along Song Ma, but this does not preclude a further oceanic opening and a closure during the Indosinian.
ISSN: 1631-0713

hal-00411591
https://hal.archives-ouvertes.fr/hal-00411591
DOI : 10.1016/j.crte.2007.10.005