Éditeur(s) : HAL CCSD
Résumé : International audience
As subducting plates reach the base of the upper mantle, some appear to flatten and stagnate, while others seemingly go through unimpeded. This variable resistance to slab sinking has been proposed to affect long-term thermal and chemical mantle circulation. A review of observational constraints and dynamic models highlights that neither the increase in viscosity between upper and lower mantle (likely by a factor 20–50) nor the coincident endothermic phase transition in the main mantle silicates (with a likely Clapeyron slope of –1 to –2 MPa/K) suffice to stagnate slabs. However, together the two provide enough resistance to temporarily stagnate subducting plates, if they subduct accompanied by significant trench retreat. Older, stronger plates are more capable of inducing trench retreat, explaining why backarc spreading and flat slabs tend to be associated with old-plate subduction. Slab viscosities that are ∼2 orders of magnitude higher than background mantle (effective yield stresses of 100–300 MPa) lead to similar styles of deformation as those revealed by seismic tomography and slab earthquakes. None of the current transition-zone slabs seem to have stagnated there more than 60 m.y. Since modeled slab destabilization takes more than 100 m.y., lower-mantle entry is apparently usually triggered (e.g., by changes in plate buoyancy). Many of the complex morphologies of lower-mantle slabs can be the result of sinking and subsequent deformation of originally stagnated slabs, which can retain flat morphologies in the top of the lower mantle, fold as they sink deeper, and eventually form bulky shapes in the deep mantle.
ISSN: 1553-040X

hal-01571965
https://hal.archives-ouvertes.fr/hal-01571965
DOI : 10.1130/GES01476.1

Éditeur(s) : HAL CCSD Wiley
Résumé : International audience
Within the framework of the international field campaign COPS (Convective and Orographically induced Precipitation Study), a large suite of state-of-the-art meteorological instrumentation was operated, partially combined for the first time. This includes networks of in situ and remote-sensing systems such as the Global Positioning System as well as a synergy of multi-wavelength passive and active remote-sensing instruments such as advanced radar and lidar systems. The COPS field phase was performed from 01 June to 31 August 2007 in a low-mountain area in southwestern Germany/eastern France covering the Vosges mountains, the Rhine valley and the Black Forest mountains. The collected dataset covers the entire evolution of convective precipitation events in complex terrain from their initiation, to their development and mature phase until their decay. Eighteen Intensive Observations Periods with 37 operation days and eight additional Special Observations Periods were performed, providing a comprehensive dataset covering different forcing conditions. In this article, an overview of the COPS scientific strategy, the field phase, and its first accomplishments is given. Highlights of the campaign are illustrated with several measurement examples. It is demonstrated that COPS research provides new insight into key processes leading to convection initiation and to the modification of precipitation by orography, in the improvement of quantitative precipitation forecasting by the assimilation of new observations, and in the performance of ensembles of convection-permitting models in complex terrain.
ISSN: 0035-9009

hal-00565513
https://hal.archives-ouvertes.fr/hal-00565513
DOI : 10.1002/qj.752

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Miocene (17-11 Ma) magmatic activity in the Kabylies emplaced K-rich (and minor medium-K) calc-alkaline plutonic and volcanic rocks in five zones, delineating a ∼450 km long EW trending strip located along the northern coast of Algeria, between Annaba and Algiers. Their most likely source is the Kabylian subcontinental lithospheric mantle previously metasomatized during the Paleogene subduction of the Tethys oceanic lithosphere. Our preferred tectono-magmatic model involves a Tethyan slab detachment combined with African mantle delamination and crustal stacking, leading to the superimposition of the African continental crust over the Kabylian metasomatized lithospheric mantle. At ca. 17 Ma, the asthenospheric upwelling arising from lithospheric delamination and Tethyan slab tear triggered the thermal erosion of the latter mantle, inducing its partial melting. The corresponding mafic medium-K calc-alkaline magmas interacted with the African basement units during their ascent, generating intermediate to felsic K-rich calc-alkaline melts that display a characteristic trace element and isotopic crustal signature. Later on, slab tears propagated eastward and westward, promoting slab rollback perpendicular to plate convergence and inducing the emplacement of magmatic rocks of decreasing ages from central-eastern Algeria towards Tunisia and Morocco.
ISSN: 0899-5362

hal-01467997
https://hal.archives-ouvertes.fr/hal-01467997
DOI : 10.1016/j.jafrearsci.2016.10.005

Éditeur(s) : HAL CCSD
Résumé : Several major earthquakes have struck the 2500 km long Himalayan range during the past century. However, both the maximum size of such earthquakes and the probability of occurrence of a magnitude 9 megaquake are still a mater of debate. In this framework it is of key importance to investigate the lateral segmentation of the Himalayan arc in order to deepen our understanding of the mechanisms that control such events as well as their extents. Besides the remarkably uniform tectonic set-up and the fact that most studies on the Himalayas have focused on Central Nepal, several indications of along strike changes can be gathered.This thesis brings new constraints on lateral variations of crustal structure and of deformation between western Nepal (~80°E) and eastern Bhutan (~92°E).The first part of this thesis focuses on the lateral variations of crustal structure. In the past three years we have carried out four land gravity campaigns. We have established 366 new gravity measurement points to fill the data gaps in central and western Nepal as well as in Bhutan. This new dataset, together with available seismological data, is used to constrain thermo-mechanical models of the bending of the India plate underneath the Himalayas. While the inferred crustal geometry does not exhibit major along-strike variations over central and eastern Nepal, the shorter wavelength flexure of the lithosphere in Bhutan is associated with a weaker upper mantle rheology.The second part focuses on the lateral variations of recent deformation in the Himalayas. Fifteen years of paleoseismological investigations have extended the catalogue of major Himalayan events over the last millennium. Combining these information with secular loading, we assess the spatial and temporal stress changes on the Main Himalayan Thrust along the orogen over the last nine centuries. Our calculations indicate that inter-seismic loading has now nearly overcome the Coulomb stress decrease caused by the great ~1100 medieval earthquake. Our results also point out that the 1897 Shillong plateau earthquake does not have a major influence on the stress accumulated on the Main Himalayan Thrust since then. In order to better characterize active tectonics in the Bhutan Himalayas where no studies were done so far, we carried out a morphotectonic analysis in the south-central part of the kingdom. We show that the same amount of Holocene deformation is accommodated on the frontal thrust in Bhutan as on the neighbouring portions of the Himalayan arc. We also find evidences for two major (M>8) earthquakes on this thrust in the Bhutan Himalayas during the last millennium. Our results therefore show that Bhutan cannot be considered as a seismic gap. They also challenge the interpretation of one single ~1100 medieval mega-event that would have ruptured the Main Frontal Thrust from central Nepal to eastern Bhutan.
Au cours du dernier siècle, plusieurs séismes majeurs ont affecté l'Himalaya. Cependant, la taille maximale de ces événements et la probabilité d'occurrence de méga-séismes avec des magnitudes proches de 9 sont toujours matière à débat. L'étude de la segmentation de l'arc Himalayen est donc primordiale afin de comprendre les mécanismes qui contrôlent ces séismes ainsi que leur extension spatiale. La compréhension du cycle sismique en Himalaya est aujourd'hui essentiellement basée sur des études menées au Népal central, ce qui limite notre connaissance de son fonctionnement tri-dimensionnel. Ce travail de thèse permet d'apporter de nouvelles contraintes sur les variations latérales de la déformation crustale dans la zone comprise entre l'ouest Népal (~80°E) et l'est Bhoutan (~92°E). La première partie de cette thèse est consacrée à l'étude des variations latérales de la structure lithosphérique. Quatre campagnes gravimétriques ont été réalisées entre 2010 et 2012. Elles ont permis d'étendre le réseau gravimétrique Népalais jusqu'à l'ouest Népal et d'établir le premier réseau gravimétrique Bhoutanais. Ce nouveau jeu de données, combiné avec les données sismologiques disponibles, permet de contraindre des modèles thermo-mécaniques de la flexure de la plaque Indienne sous l'Himalaya. Les résultats suggèrent qu'il n'existe pas de variations latérales majeures du comportement mécanique de la lithosphère Indienne entre le centre et l'est Népal contrairement au Bhoutan où une rigidité flexurale plus faible est nécessaire pour expliquer les données.La deuxième partie de cette thèse est consacrée à l'étude des variations latérales des déformations récentes dans le prisme Himalayen. Les études paléosismologiques menées depuis 15 ans en Himalaya ont permis d'étendre le catalogue des événements majeurs sur le dernier millénaire. En intégrant à la fois les contraintes disponibles sur ces séismes majeurs et le chargement séculaire, nous étudions les variations spatiales et temporelles de l'état de contrainte du chevauchemlent Himalayen principal le long de l'arc. Nos calculs montrent que même dans la cas où un méga-séisme se serait produit en ~1100 en Himalaya, le chargement séculaire a quasiment compensé la chute de contrainte associée. Les modèles montrent aussi que le séisme du Shillong ne joue pas un rôle majeur sur les contraintes accumulées sur le chevauchement Himalayen depuis 1897 au niveau du Bhoutan. Enfin, nous présentons les premières contraintes sur la tectonique active au Bhoutan. L'étude morphotectonique réalisée au centre du Sud-Bhoutan a permis de montrer que la majeure partie de la déformation Holocène est accommodée au niveau du front Himalayen, comme au Népal. Nous montrons aussi des évidences de ruptures de surface avec des décalages verticaux de plusieurs mètres associés à deux séismes majeurs sur le dernier millénaire. Ces évidences remettent en cause l'interprétation d'un méga-séisme en ~1100.
https://tel.archives-ouvertes.fr/tel-01002381

NNT : 2013MON20074
tel-01002381
https://tel.archives-ouvertes.fr/tel-01002381
https://tel.archives-ouvertes.fr/tel-01002381/document
https://tel.archives-ouvertes.fr/tel-01002381/file/35970_BERTHET_2013_archivage_cor.pdf

Éditeur(s) : HAL CCSD
Résumé : International audience
High Pressure - Low Temperature (HP-LT) rocks testify for burying and exhumation of crustal material in subduction zones. The question of their exhumation is nevertheless still unclear. The Aegean domain offers several HP-LT belts. Especially, the Attic-Cycladic Blueschist unit (ACBU) is an example of a HP-LT unit exhumed in a convergent and then in a divergent context. It actually appears in metamorphic core complexes (MCCs) formed in the back-arc of the subduction. The syn-convergence "message" is however difficult to read because of the post-convergence structural and thermal overprint that accompanied the formation of the MCCs. Particularly, the geometry, the timing and the amount of the syn-orogenic exhumation remain unclear. We investigate theses questions with metamorphic petrology (Andros and Ios islands) and phengite population, single grain and in situ 40Ar-39Ar geochronology (Andros, Tinos, Syros and Ios islands). Based on these new constraints and a synthesis of published data, we are able to refine the geometry, the timing and the modes of the exhumation of the ACBU. Data from the whole Cyclades exhibit little differences in the age and P-T conditions at the successive stages of syn-orogenic exhumation. The peak of pressure (500±50 °C-18±1 kbar) has been reached at 50-55 Ma. The onset of the exhumation occurred at 40-45 Ma in blueschist facies conditions, between a basal thrust and a summital detachment. The following decompression was accompanied by cooling until 30-35 Ma (400±50 °C-8±1 kbar). At that time, the boundary conditions switched to extension. The change in boundary conditions is recorded by slowing of the exhumation and isobare heating. The conditions of post-orogenic exhumation differ from an island to another. The onset of post-orogenic exhumation is dated around 30 Ma in the northern Cyclades and 25 Ma in the southern Cyclades. It is related to top-to-the-North deformation in all the studied domain. The end of ductile deformation below the detachments is also diachronous (21 Ma in the North and 18 Ma in the South). Finally, we propose a model for the final steps of the exhumation related to the intrusion of granitic bodies around 14 Ma.
American Geophysical Union, Fall Meeting
San Francisco, United States

insu-00860510
https://hal-insu.archives-ouvertes.fr/insu-00860510
BIBCODE : 2010AGUFM.T23C2301L

Éditeur(s) : HAL CCSD
Résumé : 38 pages
Rapport
The Chicxulub impact crater, México, is unique. It is the only known terrestrial impact structure that has been directly linked to a mass extinction event and the only terrestrial impact with a global ejecta layer. Of the three largest impact structures on Earth, Chicxulub is the best preserved. Chicxulub is also the only known terrestrial impact structure with an intact, unequivocal topographic peak ring. Chicxulub’s role in the Cretaceous/Paleogene (K-Pg) mass extinction and its exceptional state of preservation make it an important natural laboratory for the study of both large impact crater formation on Earth and other planets and the effects of large impacts on the Earth’s environment and ecology. Our understanding of the impact process is far from complete, and despite more than 30 years of intense debate, we are still striving to answer the question as to why this impact was so catastrophic.During International Ocean Discovery Program (IODP) Expedition 364, Paleogene sediments and lithologies that make up the Chicxulub peak ring were cored to investigate (1) the nature and formational mechanism of peak rings, (2) how rocks are weakened during large impacts, (3) the nature and extent of post-impact hydrothermal circulation, (4) the deep biosphere and habitability of the peak ring, and (5) the recovery of life in a sterile zone. Other key targets included sampling the transition through a rare midlatitude section that might include Eocene and Paleocene hyperthermals and/or the Paleocene/Eocene Thermal Maximum (PETM); the composition and character of the impact breccias, melt rocks, and peak-ring rocks; the sedimentology and stratigraphy of the Paleocene–Eocene Chicxulub impact basin infill; the chronology of the peak-ring rocks; and any observations from the core that may help us constrain the volume of dust and climatically active gases released into the stratosphere by this impact. Petrophysical property measurements on the core and wireline logs acquired during Expedition 364 will be used to calibrate geophysical models, including seismic reflection and potential field data, and the integration of all the data will calibrate impact crater models for crater formation and environmental effects. The proposed drilling directly contributes to IODP Science Plan goals:Climate and Ocean Change: How resilient is the ocean to chemical perturbations? The Chicxulub impact represents an external forcing event that caused a 75% level mass extinction. The impact basin may also record key hyperthermals within the Paleogene.Biosphere Frontiers: What are the origin, composition, and global significance of subseafloor communities? What are the limits of life in the subseafloor? How sensitive are ecosystems and biodiversity to environmental change? Impact craters can create habitats for subsurface life, and Chicxulub may provide information on potential habitats for life, including extremophiles, on the early Earth and other planetary bodies. Paleontological and geochemical studies at ground zero will document how large impacts affect ecosystems and effects on biodiversity.Earth Connections/Earth in Motion: What are the composition, structure and dynamics of Earth’s upper mantle? What mechanisms control the occurrence of destructive earthquakes, landslides, and tsunami? Mantle uplift in response to impacts provides insight into dynamics that differ between Earth and other rocky planets. Impacts generate earthquakes, landslides, and tsunami, and scales that generally exceed plate tectonic processes yield insight into effects, the geologic record, and potential hazards.IODP Expedition 364 was a Mission Specific Platform expedition to obtain subseabed samples and downhole logging measurements from the sedimentary cover sequence and peak ring of the Chicxulub impact crater. A single borehole was drilled into the Chicxulub impact crater on the Yucatán continental shelf, recovering core from 505.7 to 1334.73 m below seafloor with ~99% core recovery and acquiring downhole logs for the entire depth.
International Ocean Discovery Program

hal-01639520
https://hal.archives-ouvertes.fr/hal-01639520
DOI : 10.14379/iodp.pr.364.2017

Éditeur(s) : HAL CCSD Elsevier
Résumé : We describe, test, and explain the relative effectiveness of six thermal and microwave techniques of absolute palaeointensity determination applied to lava samples from Mount Etna (Sicily) that acquired their thermoremanence (TRM) in a known geomagnetic field. The application of a single alternating field demagnetisation treatment prior to each measurement in a standard Thellier experiment is demonstrated to be beneficial: increasing the quality of the results and making the analysis simpler. A new quasi-perpendicular (QP) method dramatically improves the linearity of Arai plots by reducing or altogether eliminating non-ideal effects due to multidomain (MD) grains. Two broad types of sample were encountered by this study and the QP method is the only one capable of producing accurate measurements from them both. Its ease of use, speed, and increased reliability should allow it to replace standard double heating methods in studies such as these where laboratory alteration can be detected by other means than pTRM checks. The results of experiments performed using a microwave palaeointensity system provide further proof that the microwave (de)magnetisation process is equivalent to conventional thermal excitation. They also demonstrate that microwave experiments are subject to the same risks as conventional experiments when performed on samples containing MD grains. The behaviour of the samples in both the thermal and microwave experiments is in good agreement with a recently proposed model of MD TRM which is based on first-order symmetry of the remagnetisation process.
ISSN: 0012-821X

hal-00407671
https://hal.archives-ouvertes.fr/hal-00407671
DOI : 10.1016/j.epsl.2007.03.016

Éditeur(s) : HAL CCSD Wiley
Résumé : International audience
Due to shallow penetration of millimeter waves (MMW) and convection in liquid medium surrounding cells, the problem of accurate assessment of local MMW heating in in vitro experiments remains unsolved. Conventional dosimetric MMW techniques, such as infrared imaging or fiber optic (FO) sensors, face several inherent limits. Here we propose a methodology for accurate local temperature measurement and subsequent specific absorption rate (SAR) retrieval using microscale thermocouples (TC). SAR was retrieved by fitting the measured initial temperature rise to the numerical solution of an equivalent thermal model. It was found that the accuracy of temperature measurement depends on thermosensor size, that is, the smaller TC, the more accurate the temperature measurement. SAR determined using TC with lead diameters of 25 and 75m demonstrated 98.5% and 80.4% match with computed SAR, respectively. However, both TC provided the same temperature rises in long run (>10min). FO probe failed to measure adequately local heating both for short and long exposures due to the relatively large size of the probe sensor (400m) and time constant (0.6s). Calculated SAR in the cell monolayer was almost two times lower than that in the surrounding liquid. It was shown that the impact of the cell monolayer on heating due to its small thickness (5 to 10m) can be considered as negligible. Moreover, we demonstrated the possibility of accurate measurement of MMW-induced thermal pulses (up to 10 degrees C) using 25m TC. Bioelectromagnetics. 38:11-21, 2017. (c) 2016 Wiley Periodicals, Inc.
ISSN: 0197-8462

hal-01436768
https://hal-univ-rennes1.archives-ouvertes.fr/hal-01436768
DOI : 10.1002/bem.21999
PUBMED : 27571392

Résumé : En 2003 des mesures au spectromètre IR à Transformée de Fourier (FTIR) ont permis d'identifier et de mesurer les COV émis par la décharge à ciel ouvert de la Gabarre, principale de l'île Guadeloupe, située entre une zone urbaine et une mangrove. Ces COV ont été retrouvés (2004) la nuit dans les cités, justifiant les plaintes des riverains. Dans le cadre de cette thèse, des mesures au spectromètre de masse portatif MS 200 ont validé ces résultats du FTIR. De nouvelles mesures au MS 200 ont été menées dans toute la zone de la décharge. Les cités concernées étant à l'opposé du flux synoptique d'Alizés-Est, les facteurs météorologiques permettant la dispersion et le transport des COV de la décharge vers la zone urbaine ont été recherchés. La diminution nocturne de l'intensité des Alizés au dessus de l'ile peut laisser place à des phénomènes locaux tels les brises. L'idée d'une brise terre-mer a été éliminée. Un maillage autou~ de la décharge (cités et mangrove) avec 8 thermomètres a révélé un îlot de chaleur urbain nocturnegénérant une brise thermique d'environ Ims- I (mesurée et calculée). Avec les radiosondages Météo France et un SODAR installé dans la décharge, une très forte stabilité dans les basses couches atmosphériques de la couche limite nocturne avec une inversion de surface d'environ 120mvv apparait. Ces facteurs expliquent la pollution des cités par les COV de la décharge, Un modèlevGaussien en tenant compte a été validé par les mesures de COV.vCette étude peut être étendue à d'autres décharges à ciel ouvert et à d'autres types de traitement de polluants de décharge.
In 2003, the VOC emissions coming from "La Gabarre", the main open landfill in Guadeloupe, located in-between an urban area and a mangrove, were identified and quantified with a portable FTIR spectrometer. In 2004, COVs found at nighttime in the urban area nearby confirmed why residents complain about. As part of this thesis, portable mass spectrometer MS 200 measurements validated these FTIR figures. New systematic SM measurements have been carried on around the landfill. Since the polluted urban area stands on the opposite way of the East Trade winds synoptic flux, aIl the weather factors likely to scatter and transport the dump COVs were scrutinized. At night, the strength of the Trade winds decreases over Guadeloupe, which may give way to local phenomena such as breezes. The occurrence of land/sea breeze was eliminated. A close surveying surrounding the landfill with 8 thermometers both in the projects and in the mangrove revealed an urban heat island causing thermal breezes of about lms-l (measured and calculated). Using soundings from Meteo France, and a SODAR inside the dump, we found a great stability of the night boundary layer with a surface inversion near 120m. Pollution of the nearby urban area with landfill COVs is elucidatcd by the above factors. A transport Gaussian model is in agreement with COV measurements. This study can be extended to different open landfills and different types of polluting matters processes in dumps

http://www.theses.fr/2013AGUY0700/document

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The timing of E–W extension of the Tibetan plateau provides a test of mechanical models of the geodynamic evolution of the India–Asia convergence zone. In this work we focus on the Kung Co half graben (Southern Tibet, China), bounded by an active N–S normal fault with a minimum vertical offset of 1600 m. To estimate the onset of normal faulting we combined high and medium temperature (U–Pb, Ar/Ar) and low temperature ((U–Th)/He) thermochronometry of the Kung Co pluton, a two-mica granite of the northern Himalayan granitic belt that outcrop in the footwall of the fault. Biotite and muscovite Ar/Ar ages , are close from each other [not, vert, similar 16 Ma ± 0.2 (Ms) and not, vert, similar 15 ± 0.4 Ma (Bt)], which is typical of fast cooling. The zircon and apatite (U–Th)/He ages range from 11.3 to 9.6 Ma and 9.9 to 3.7 Ma respectively. These He ages are indicative of (1) fast initial cooling, from 11.3 to not, vert, similar 9 Ma, gradually decreasing with time and (2) a high geothermal gradient (not, vert, similar 400 °C/km), close to the surface at not, vert, similar 10 Ma. The Kung Co pluton was emplaced at about 22 Ma (U–Pb on zircon) at less than 10 km depth and 520–545 °C. Subsequent to its shallow emplacement, the pluton underwent fast thermal re-equilibration ending around 7.5 Ma, followed by a period of slow cooling caused either by the end of the thermal re-equilibration or by very slow exhumation (0.02–0.03 mm/yr) from not, vert, similar 7.5 Ma to at least 4 Ma. In either case the data suggest that the exhumation rate increased after 4 Ma. We infer this increase to be related to the initiation of the Kung Co normal fault. A critical examination of previously published data show that most not, vert, similar N–S Tibetan normal faults may have formed less than 5 Ma ago rather than in the Miocene as assumed by several authors. Such a young age implies that E–W extension is not related to the Neogene South Tibetan magmatism (25 to 8 Ma). Consequently, models relating E–W extension to magmatism, such as convective removal of the lower lithosphere, may be inappropriate. We rather think that this extension is related with local accommodation of boundary forces and displacements.
ISSN: 0012-821X

hal-00311791
https://hal.archives-ouvertes.fr/hal-00311791
DOI : 10.1016/j.epsl.2007.01.029

Éditeur(s) : HAL CCSD
Résumé : Joint inversions are now commonly used in Earth Sciences. They have been developed to better understand Earth structure since they provide more constraints on the inverted parameters. We propose a new process to simultaneously invert several data sets in order to better image 3-D crustal and upper mantle structures. Our inversion uses 3 kind of data which present a good complementarity : (1) P receiver functions to provide Moho depth variations, (2) teleseismic delay times of P waves to retrieve velocity anomalies in the crust and upper mantle, (3) gravity anomalies to image density variations at lithospheric scale. In our scheme, receiver functions are first inverted. The resulting Moho depths are then interpolated and incorporated as a priori information into the joint inversion of teleseismic delay times and gravity anomalies process. In our new approach, we perform a model space search for Moho variations, P-velocity and density structure to find acceptable fit to the three data sets. In order to preferentially sample the good data fit region, we chose the Neighborhood algorithm of Sambridge to optimistically survey the model space. We model the delay times with a 3-D raytracing using velocity nodes evenly spaced and linked with density nodes via a linear relationship. This relationship can evolve through depth, simulating its pressure dependance. We test our scheme on synthetic examples, and apply the method in a continental rifting region where deformation processes are complex and badly known. This joint inversion thus provides more constraints on the inverted parameters, and allows us to better image crust - mantle interactions in the case of the Hangai dome (Central Mongolia). Indeed, in this area, we expect an asthenospheric upwelling to dynamically support the topography, but we image a density - velocity anomaly in the lower crust. The effects on topography and the origin (composition vs. thermal) of this anomaly are still under debate.
Les inversions conjointes sont maintenant communément utilisées en Sciences de la Terre. Elles ont été développées afin d'améliorer notre connaissance et compréhension de la structure interne de la Terre puisqu'elles apportent de plus en plus de contraintes sur les paramètres inversés. Dans cette thèse, nous proposons un nouveau processus d'inversion conjointe qui prend en compte trois paramètres différents et qui mène à l'obtention d'un modèle lithosphérique tridimensionnel. Notre méthode utilise trois types de données gravimétriques et sismologiques qui présentent une bonne complémentarité : (1) Les fonctions récepteur P afin d'obtenir les variations de profondeur du Moho, (2) les délais de temps d'arrivées P des téléséismes pour retrouver les anomalies de vitesse dans la croûte et le manteau supérieur, (3) les anomalies gravimétriques qui donnent accès aux variations de densité à l'échelle lithosphérique. Dans le schéma d'inversion proposé, nous inversons d'abord les fonctions récepteur. Les variations de profondeur du Moho qui en résultent sont alors interpolées puis incorporées comme information a priori dans le processus d'inversion conjointe gravimétrie - tomographie télésismique. Que ce soit pour les fonctions récepteur ou pour la partie conjointe, notre méthode d'inversion se base sur un algorithme de recherche afin de trouver la structure qui minimise l'écart aux trois types de données. Nous avons opté pour l'algorithme de voisinage qui présente l'avantage de concentrer sa recherche dans les régions qui minimisent l'écart aux données sans toutefois abandonner les autres régions afin de limiter les risques de convergence vers un minimum local. Nous utilisons un modèle 3-D constitué de noeuds de vitesse afin de modéliser les délais de temps. Ces noeuds de vitesse sont liés aux noeuds de densité grâce à une relation linéaire entre vitesse et densité. Cette relation peut évoluer avec la profondeur de manière à simuler les effets dus aux variations de pression. Nous avons réalisé plusieurs tests synthétiques afin d'évaluer le comportement de notre nouvelle méthode. Ils ont permis de montrer que les variations du Moho ainsi que les anomalies de vitesse et densité sont bien retrouvées. Ils ont également montré l'importance de la prise en compte de ces trois types de données dans un même schéma d'inversion, notamment en ce qui concerne la faculté de discerner les variations d'interfaces des anomalies volumiques. Nous avons ensuite appliqué la méthode dans une région continentale en phase de rifting où les processus de déformation sont complexes et mal connus. Notre nouvelle méthode a apporté davantage de contraintes sur les paramètres inversés et a permis d'obtenir un modèle correctement résolu de la croûte et du manteau supérieur sous le dôme de Hangai (Mongolie Centrale). Une anomalie asthénosphérique sous le dôme est souvent invoquée pour expliquer sa topographie élevée mais c'est une anomalie (en vitesse et densité) crustale (croûte inférieure) qui s'exprime dans nos modèles. Ses effets sur la topographie et son origine (compositionnelle et/ou thermique) sont encore débattus et nécessiteraient des études plus poussées (paramétriques, VP =VS, ...).
https://tel.archives-ouvertes.fr/tel-00783524

tel-00783524
https://tel.archives-ouvertes.fr/tel-00783524
https://tel.archives-ouvertes.fr/tel-00783524/document
https://tel.archives-ouvertes.fr/tel-00783524/file/Basuyau2011.pdf

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Deformation of the continental lithosphere is traditionally modeled assuming that heat production in the subcontinental lithospheric mantle is negligible. Although this may be appropriate for highly depleted Archean lithosphere, studies of mantle xenoliths and lithospheric-derived mafic rocks suggest that heat productions of up to 0.4 ;μW/m3 may be attained in the mantle of Phanerozoic and Neoproterozoic regions due to modal metasomatism. To investigate the effect of a local enrichment in heat-producing elements within the lithospheric mantle on the continental deformation, we performed a series of 2D thermo-mechanical models simulating the deformation of a lithospheric plate 1000 km long, which contains in its central part a 200 km wide and 20 km-thick mantle layer with a heat production of 0.05;–0.25 ;μW/m3 between 40 and 80 km depth, leading to a local enhancement of the surface heat flow by 1;–5 mW/m2. Compression models show that a 20 km-thick layer with a heat production as low as 0.05 ;μW/m3 within the shallow lithospheric mantle leads to strain localization in both the enriched mantle and the overlying crust. Strain localization depends exponentially on the temperature increase in the lithosphere section, which is controlled by the volume of metasomatized mantle and the intensity of the metasomatic enrichment in heat-producing elements. A heat production of 0.25 μW/m3 between 60 and 80 km depth results, for instance, in strains within and above the metasomatized mantle 5 times higher than in the surrounding lithosphere. Strain localization also depends on the location of the heat-producing domain and on the plate rheological structure; deeper heat-producing domains and weaker plates leading to stronger localization. These results provide an explanation for strain localization in intraplate environments, leading to the formation of orogenic belts situated hundreds to thousands of kilometers away from known plate boundaries, as observed in the Neoproterozoic belts of Gondwana and in the present-day deformation of the Asian plate.
ISSN: 0012-821X

hal-00411386
https://hal.archives-ouvertes.fr/hal-00411386
DOI : 10.1016/j.epsl.2008.07.040

Éditeur(s) : HAL CCSD Elsevier
Résumé : Validation of building energy simulation programs is of major interest to both users and modellers. To achieve such a task, it is essential to apply a methodology based on a priori test and empirical validation. A priori test consists in verifying that models embedded in a program and their implementation are correct. this should be achieved before carrying out experiments. The aim of this report is to present results from the application of the BESTEST procedure to our code. We will emphasise the way it allows to find bugs in our program and also how it permits to qualify models of heat transfer by conduction
World Renewable Energy Congress VI Renewables: The Energy for the 21st Century World Renewable Energy Congress VI 1-7 July 2000 Brighton, UK

ISBN : 978-0-08-043865-8
hal-00767562
https://hal.archives-ouvertes.fr/hal-00767562
https://hal.archives-ouvertes.fr/hal-00767562/document
https://hal.archives-ouvertes.fr/hal-00767562/file/TedWrec2000.pdf

Éditeur(s) : HAL CCSD Springer Verlag
Résumé : International audience
Polarized emittance measurements were acquired for synthetic forsterite, the pure magnesium end member of the olivines group, on the whole infrared spectral range and up to the melting point by using CO2 laser heating. The experimental data, fitted with a semi-quantum dielectric function model, allowed the retrieval of the temperature dependence of the absorption coefficient of forsterite both in the opaque and semi-transparent regions. The analysis of the phonon parameters indicates that the lattice dynamics evolve drastically with increasing temperature. The normal modes involving motions of the magnesium cations located in site 1 are the more impacted, and some of them vanish around 1,200 K. The results confirm that the enhancement of the lattice anharmonicity and the increasing mobility of the magnesium cations are closely linked and are at the origin of the anomalies observed in the evolution of the thermophysical properties. This complete set of spectroscopic data may be a step toward a more precise evaluation of the impact of thermal radiation heat transfer inside systems involving forsterite and quantification of their heat budget.
ISSN: 0342-1791

hal-00817079
https://hal.archives-ouvertes.fr/hal-00817079
DOI : 10.1007/s00269-013-0570-z

Éditeur(s) : HAL CCSD Oxford University Press (OUP)
Résumé : International audience
The processes active in the deep crust above an oceanic subduction zone during its evolution have been constrained through a detailed geochemical study (major and trace elements and Sr, Nd and Pb isotopes) of representative samples through an 30 km thick exhumed crustal section of the Cretaceous Kohistan oceanic island arc (Northern Pakistan). The use of both trace elements and radiogenic isotopes reveals two distinct geochemical suites (suites A and B) within the JijalPatanKiruKamila (JPKK) complex. Suite A is characterized by a progressive enrichment in Pb-207 and a decrease in Nd-143/Nd-144 with increasing La-N/Sm-N. Suite B has higher Pb-207/Pb-204 and lower Nd-143/Nd-144 ratios with approximately constant La-N/Sm-N. By combining trace elements with different partitioning behaviour it is demonstrated that there is an increasing contribution of the subduction component in the magmas with time. It is also possible to distinguish a slab component imprint carried by aqueous fluids from one corresponding to sediment melts. Intrusive granites are abundant in the upper levels of the JPKK section. All were generated at the arc root level (Jijal crustal section) during dehydration-melting of hornblende-rich plutonic rocks. A three-stage geodynamic model is proposed for the evolution of the arc over a period of 30 Myr. The first stage (117105 Ma) starts with the onset of subduction, which was followed by the building of the volcanic arc. The second stage (10599 Ma to 9691 Ma) corresponds to a major igneous event, which was characterized by abundant magma underplating and granulite-facies metamorphism at the arc base. Recycling of the residualcumulative lower crust into the convective asthenospheric mantle was efficient during this stage, and was probably related to thermo-mechanical erosion of the base of the crust. The last stage (9585 Ma) corresponds to a period of low magmatic activity, which marked the end of the intra-oceanic subduction. This is related to the formation of a cold blanket above the slab surface as a result of thermo-mechanical erosion of the cold walls of the subduction zone (i.e. the upper part of the slab and the base of the overriding plate), and corner flow dragging the cold material into the zone of melt generation. Ultimately, a voluminous magmatic pulse occurred around 85 Ma (forming the Chilas complex), before arccontinent collision.
ISSN: 0022-3530

hal-00420068
https://hal.archives-ouvertes.fr/hal-00420068
DOI : 10.1093/petrology/egp010

Éditeur(s) : HAL CCSD AGU and the Geochemical Society
Résumé : International audience
The transition between the small melt lens observed on top of fast spreading ridge magma chambers and the overlying sheeted dike complex marks the interface between magma and the hydrothermal convective system. It is therefore critical to our understanding of fast spreading ridge accretion processes. We present maps of two areas of the Oman ophiolite where this transition zone is observed as continuous outcrops. Our observations, which include the base of the sheeted dike being crosscut by gabbros, are consistent with episodic dike injections in a steady state model but also suggest that the root of these dikes is commonly erased by vertical movements of the top of the melt lens. Dike assimilation is a possible mechanism for incorporating hydrated phases, which result from hydrothermal alteration, to the melt lens during upward migrations of its upper boundary. Upward migrations are also responsible for a granoblastic overprint of the root of the dikes that is also observed in the stoped diabase xenoliths. This granoblastic overprint attests to reheating of previously hydrothermally altered lithologies which can even trigger hydrous partial melting due to the lowering of the solidus of mafic lithologies by the presence of a water activity. Clinopyroxenes present in these granoblastic lithologies are typically low in Ti and Al content, thus strongly contrasting with corresponding magmatic clinopyroxene. This may attest to the recrystallization of clinopyroxenes after amphiboles under the peculiar conditions present at the root zone of the sheeted dike complex. Downward migrations of the top of the melt lens result in the crystallization of the isotropic gabbros at its roof, which represent the partly fossilized melt lens. Melt lens fossilization eventually occurs when magma supply is stopped or at the melt lens margins where the thermal conditions become cooler. Melt lens migration, recrystallization of hydrothermally altered sheeted dikes during reheating stages, and assimilation processes observed in the Oman ophiolite are consistent with the observations made in IODP Hole 1256D. We propose a general dynamic model in which the melt lens at fast spreading ridges undergoes upward and downward movements as a result of either eruption/replenishment stages or variations in the hydrothermal/magmatic fluxes.
ISSN: 1525-2027

hal-00445249
https://hal.archives-ouvertes.fr/hal-00445249
DOI : 10.1029/2009GC002652

Éditeur(s) : HAL CCSD Elsevier
Résumé : The depth of the oceanic lithosphere–asthenosphere boundary (LAB), as inferred from shear wave velocities, increases with lithospheric age, in agreement with models of cooling oceanic lithosphere. On the other hand, the distribution of radial anisotropy under oceanic plates is almost age-independent. In particular, radial anisotropy shows a maximum positive gradient at a depth of ∼70 km, which, if used as a proxy, indicates an age-independent LAB depth. These contrasting observations have fueled a controversy on the seismological signature of the LAB. To better understand the discrepancy between these observations, we model the development of lattice preferred orientation (LPO) in upper mantle crystal aggregates and predict the seismic anisotropy produced by plate-driven mid-ocean ridge flows. The model accounts for the progressive cooling of the lithosphere with age and can incorporate both diffusion and dislocation creep deformation mechanisms. We find that an age-independent distribution of radial anisotropy is the natural consequence of these simple flows. The depth and strength of anisotropy is further controlled by the deformation regime – dislocation or diffusion creep – experienced by crystals during their ascent towards, and subsequent motion away from, the ridge axis. Comparison to surface wave tomography models yield constraints on rheological parameters such as the activation volume. Although not excluded, additional mechanisms proposed to explain some geophysical signatures of the LAB, such as the presence of partial melt or changes in water content, are not required to explain the radial anisotropy proxy. Our prediction, that the age-independent radial anisotropy proxy marks the transition to flow-induced asthenospheric anisotropy, provides a way to reconcile thermal, mechanical and seismological views of the LAB.
ISSN: 0012-821X

hal-01553243
https://hal.archives-ouvertes.fr/hal-01553243
DOI : 10.1016/j.epsl.2016.12.004

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The present study aims at better deciphering the different mechanisms involved in the functioning of the subduction interplate. A 2D thermo-mechanical model is used to simulate a subduction channel, made of oceanic crust, free to evolve. Convergence at constant rate is imposed under a 100 km thick upper plate. Pseudo-brittle and non-Newtonian behaviours are modelled. The influence of the subduction channel strength, parameterized by the difference in activation energy between crust and mantle () is investigated to examine in detail the variations in depth of the subduction plane down-dip extent, . First, simulations show that numerical resolution may be responsible for an artificial and significant shallowing of if the weak crustal layer is not correctly resolved. Second, if the age of the subducting plate is 100 Myr, subduction occurs for any . The stiffer the crust is, that is, the lower is, the shallower is (60 km depth if kJ/mol) and the hotter the fore-arc base is. Conversely, imposing a very weak subduction channel ( J/mol) leads there to an extreme mantle wedge cooling and inhibits mantle melting in wet conditions. Partial kinematic coupling at the fore-arc base occurs if kJ/mol. If the incoming plate is 20 Myr old, subduction can occur under the conditions that the crust is either stiff and denser than the mantle, or weak and buoyant. In the latter condition, cold crust plumes rise from the subduction channel and ascend through the upper lithosphere, triggering (1) partial kinematic coupling under the fore-arc, (2) fore-arc lithosphere cooling, and (3) partial or complete hindrance of wet mantle melting. then ranges from 50 to more than 250 km depth and is time-dependent if crust plumes form. Finally, subduction plane dynamics is intimately linked to the regime of subduction-induced corner flow. Two different intervals of are underlined: 80–120 kJ/mol to reproduce the range of slab surface temperature inferred from geothermometry, and 10–40 kJ/mol to reproduce the shallow hot mantle wedge core inferred from conditions of last equilibration of near-primary arc magmas and seismic tomographies. Therefore, an extra process controlling mantle wedge dynamics is needed to satisfy simultaneously the aforementioned observations. A mantle viscosity reduction, by a factor 4–20, caused by metasomatism in the mantle wedge is proposed. From these results, I conclude that the subduction channel down-dip extent, , should depend on the subduction setting, to be consistent with the observed variability of sub-arc depths of the subducting plate surface.
ISSN: 0031-9201

hal-01623155
https://hal.archives-ouvertes.fr/hal-01623155
DOI : 10.1016/j.pepi.2017.05.008

Éditeur(s) : HAL CCSD Elsevier
Résumé : Carbon emission at volcanic centers requires a constant balance between output (mostly by volcanism, either at plate boundaries or intraplate) and input (mostly at trench settings) of carbon from and to the Earth's mantle. The form of carbon that resides in the mantle is controlled by depth (pressure) and oxygen fugacity, the latter in turn depending on the depth and the concentration of iron in the mantle. In the shallow, lithospheric mantle, carbon is likely to be present in the oxidized form of CO2 (except under cratons where carbon is reduced to graphite or diamond). Below approximately 90 km, in the asthenosphere, the oxidized form of carbon is carbonate, either mineral or melt, depending on the thermal regime. At depths greater than approximately 150 km, the asthenospheric mantle is too reducing for carbon to stay in its oxidized form and only diamond is present, unless there is sufficient hydrogen to form reduced C–H fluids. Hence, the region located in the depth range of 90 to 150 km deep is where carbonatitic melts can most likely be produced and impregnate the surrounding mantle through metasomatism. The upper bound of this region is called the carbonate ledge. This limit prevents carbonate (either solid or molten) from ascending because of degassing and CO2 liberation. The lower bound is a redox front where redox melting (that is, melting caused by oxidation) may take place in an ascending portion of carbon-containing mantle. Carbonatite eruptions and presence of carbonate mineral inclusions in deep-seated diamonds provide evidence that these boundaries can be trespassed in some cases.An analysis of the experimental data that has bearing on silicate melting in the presence of carbon further shows that the carbonate ledge is a melting curve with a negative or flat Clapeyron (dP/dT) slope. In the carbonated ultrabasic (peridotite) systems, the carbonate ledge is located between ~ 2–3 GPa. The ledge divides the pressure–temperature space into a region of low-pressure silicate melt production, and a high-pressure region where carbonatites can be produced. Carbonatitic melts in equilibrium with mantle peridotite have compositions close to dolomitic (approximately equal amounts of Ca and Mg) with a general trend of becoming markedly more magnesian with increasing pressure. Calcic carbonatites may be stable at pressures < 2 GPa if clinopyroxene is absent. At mantle transition zone pressure range, there seems to be a melting temperature decrease (negative fusion slope), which may be caused by the stabilization of majoritic garnet.The carbonated basic (broadly eclogitic) system is more complex than the peridotitic one, because of the strong control of bulk silicate composition on melting temperatures, and hence, on melt composition. In carbonated eclogite systems, we propose that the effect of bulk composition upon all observed features can perhaps be related to silica super-saturation, or lack thereof. In some cases, high calcium (> 80 mol% CaCO3) melts can be produced, making the melting of carbonated eclogites an appealing scenario for the genesis of calcio-carbonatites in the Earth's mantle. Comparison with modeled pressure–temperature paths of subducted oceanic lithosphere shows that fusion of carbonated eclogite at depths shallower than 200 km should be expected for hot (Cascadian-type) subduction thermal regimes. On the other hand, in the case of cooler thermal regimes (Honshu-type, for instance), subducted carbonates may be stable to greater depths in Earth at trench settings, depending on the bulk composition of the system.Furthermore, high-pressure experiments show evidence of a continuum among carbonatitic, kimberlitic, melilititic, and basaltic liquids, for increasing melting degree of carbonated peridotite. This continuum has not been documented in the case of fusion of carbonated eclogite. It may be present, however, when certain sediments are fused, although the silicate melts are granitic to rhyodacitic instead of being kimberlitic in composition. Additional high-pressure work on phase relations in the simple binary system CaCO3–MgCO3 and specific focus on oxide solubility in the vapor phase have the potential to further clarify phase relations on complex silicate–carbonate systems at mantle conditions.
ISSN: 0009-2541

hal-01277770
https://hal.archives-ouvertes.fr/hal-01277770
DOI : 10.1016/j.chemgeo.2015.05.018

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Unusual high-pressure inner thermal aureoles are described from the Minador and Angico Torto epidote-bearing tonalitic plutons that emplaced into green schist-facies metasedimentary rocks of the Neoproterozoic Cachoeirinha-Salgueiro belt, northeastern Brazil. The foliated pelitic hornfelses display the mineral assemblage garnet, kyanite, staurolite, muscovite, biotite, plagioclase +/- quartz. Rare fibrolite is only found very close to the contacts. Hornfelses display steep mineral lineations and steeply-dipping foliations concordant with magmatic contacts. Leucocratic veinlets containing quartz, oligoclase, garnet, kyanite, staurolite, rutile and ilmenite suggest that limited melting conditions were reached very close to magmatic contacts (T >= 650 degrees C, P around 8 kbar). These high-pressure hornfelses form a few meters thick, rigid envelopes around the two plutons. Contrary to known examples of kyanite-bearing hornfelses that recorded high-temperature decompression, the nearly isobaric cooling down to ca. 450 degrees C is constrained by 3.20-3.30 Si contents of retrogressive phengites from both inner hornfelses and ductilely-deformed tonalite at the pluton margins. Isograds and bathograds are, therefore, apparently telescoped due to HP/LT shearing, possibly caused by subsequent differential vertical movements affecting these two solidified plutons. The unusual depth of emplacement of these syn-kinematic calc-alkaline plutons is explained by a tentative geodynamic model involving a pre-620 Ma-subduction setting.
ISSN: 0895-9811

hal-00424503
https://hal.archives-ouvertes.fr/hal-00424503
DOI : 10.1016/j.jsames.2008.09.005