Éditeur(s) : HAL CCSD Société Géologique de France
Résumé : International audience
The seaward extension of onshore formations and structures were previously almost unknown in Provence. The interpretation of 2D high-resolution marine seismic profiles together with the integration of sea-bottom rock samples provides new insights into the stratigraphic, structural and paleogeographic framework of pre-Messinian Salinity Crisis (MSC) deposits of the Provence continental shelf. Seven post-Jurassic seismic units have been identified on seismic profiles, mapped throughout the offshore Provence area and correlated with the onshore series. The studied marine surface and sub-surface database provided new insights into the mid and late Cretaceous paleogeography and structural framework as well as into the syn-and post-rift deformation in Provence. Thick (up to 2000 m) Aptian-Albian series whose deposition is controlled by E-W-trending faults are evidenced offshore. The occurrence and location of the Upper Cretaceous South-Provence basin is confirmed by the thick (up to 1500 m) basinal series downlaping the Aptian-Albian unit. This basin was fed in terrigenous sediments by a southern massif (" Massif Méridional ") whose present-day relict is the Paleozoic basement and its sedimentary cover from the Sicié imbricate. In the bay of Marseille, thick syn-rift (Rupelian to Aquitanian) deposition occurred (>1000 m). During the rifting phase, syn-sedimentary deformations consist of dominant N040 to N060 sub-vertical faults with a normal component and N050 drag-synclines and anticlines. The syn-rift and early post-rift units (Rupelian to early Burdigalian) are deformed and form a set of E-W-trending en echelon folds that may result from sinistral strike-slip reactivation of N040 to N060 normal faults during a N-S com-pressive phase of early-to-mid Burdigalian age (18-20 Ma). Finally, minor fault reactivation and local folding affect post-rift deposits within a N160-trending corridor localized south of La Couronne, and could result from a later, post-Burdigalian and pre-Pliocene compressive phase.
Cadre tectonostratigraphique des formations anté-pliocènes du plateau continental de Provence (golfe du Lion oriental, SE France) Mots-clés. – Géologie marine, Tectonostratigraphie, Stratigraphie sismique, Paléogéographie crétacée, Rifting oligo-miocène, Compression post-rift Résumé. – Le prolongement en mer des formations et des structures provençales était jusqu'alors largement inconnu.L'interprétation de profils de sismique-réflexion marine 2D et l'intégration de dragages et carottages du fond-marin ont permis d'apporter des éléments nouveaux concernant le cadre stratigraphique, structural et paléogéographique des dé-pôts anté-Messiniens du plateau continental de Provence. Sept unités sismiques post-jurassiques ont été identifiées sur les profils sismiques, cartographiées à travers le plateau continental et corrélées avec les séries affleurant à terre. Une épaisse unité apto-albienne (jusqu'à 2000 m) dont le dépôt est contrôlé par des failles E-W a été mise en évidence en mer. L'existence d'un bassin subsident au Crétacé supérieur sur le plateau continental de Provence a été confirmée par le développement d'une épaisse série de bassin (jusqu'à 1500 m) reposant en downlap sur l'Apto-Albien. Le socle mé-tamorphique de l'écaille de Sicié et sa couverture sédimentaire peut être considéré comme une relique allochtone du « Massif Méridional » ayant alimenté le Bassin sud-provençal en éléments terrigènes au Crétacé supérieur. Dans la rade de Marseille, une épaisse unité syn-rift (Rupélien à Aquitanien) a été mise en évidence (>1000 m), structurée en une série de synformes en échelon d'axe E-W et affectée par des failles d'orientation dominante N040 à N060. Sur le flanc sud des synformes, la formation de plis d'axe N050 est associée à une déformation syn-sédimentaire. La formation des synformes en échelon d'axe E-W résulterait d'une réactivation en décrochement des failles N040 à N060 pendant une phase de compression N-S dont l'âge est compris entre le Burdigalien inférieur et moyen (18-20 Ma). Enfin, les dépôts post-rift sont affectés par des déformations mineures (réactivation de failles et plis associés), le long d'un couloir d'orientation N160 à l'ouest de la baie de Marseille, attribuables à une phase de compression post-burdigalienne et anté-pliocène.
ISSN: 0037-9409

hal-01463727
https://hal-amu.archives-ouvertes.fr/hal-01463727
https://hal-amu.archives-ouvertes.fr/hal-01463727/document
https://hal-amu.archives-ouvertes.fr/hal-01463727/file/Fournier_et_al_Provence_2016.pdf
DOI : 10.2113/gssgfbull.187.4-5.187

Éditeur(s) : HAL CCSD
Résumé : Guadeloupe Island (West French Indies) is one of the twenty islands that compose the Lesser Antilles Arc, which results from the subduction of the Atlantic Ocean plate beneath the Caribbean one. The island lies in a complex volcano-tectonic system and the need to understand its geological context has led to numerous on- and offshore geophysical investigations. This work presents the compilation and processing of available, on-land, airborne and marine, gravity and magnetic data acquired during the last 40 years on Guadeloupe Islands and at the scale of the Lesser Antilles Arc. The overall dataset provides new Bouguer and reduced to the pole magnetic anomaly maps at the highest achievable resolution. Regionally, the main central negative gravity trend of the arc allows defining two subsident areas. The first one is parallel to the arc direction (~N160°E) to the north, whereas the second unexpected southern one is oriented parallel to oceanic ridges (N130°E). Along the Outer Arc, the long wavelength positive anomaly is interpreted, at least along the Karukera Spur, as an up-rise of the volcanic basement in agreement with the seismic studies. To the NE of Guadeloupe, the detailed analysis of the geophysical anomalies outlines a series of structural discontinuities consistent with the main bathymetric morphologies, and in continuity of the main fault systems already reported in this area. Based on geophysical evidences, this large scale deformation and faulting of the Outer Arc presumably primarily affects the Atlantic subducting plate and secondarily deforms the upper Caribbean plate and the accretion prism. At the scale of Guadeloupe Island, joined gravity and magnetic modeling has been initiated based on existing interpretation of old seismic refraction profiles, with a general structure in three main layers. According to our geophysical anomalies, additional local structures are also modeled in agreement with geological observations: i) the gravity and magnetic signals confirm an up-rise of the volcanic basement below the limestone platforms outcropping on Grande-Terre Island ; ii) the ancient volcanic complexes of Basse-Terre Island are modeled with high density and reverse magnetized formations; iii) the recent volcanic centre is associated with formations consistent with the low measured density and the underlying hydrothermal system. The EW models coherently image a NNW-SSE depression structure in half-graben beneath Basse-Terre Island, its western scarp following the arc direction in agreement with bathymetric and seismic studies to the north of the island. The so-defined depressed area, and particularly its opening in half-graben toward the SW, is interpreted as the present-day front of deformation of the upper plate associated with the recent volcanic activity on and around Guadeloupe. Based on this regional deformation model, perspectives are given for further integrated investigation of key targets to address the internal structure and evolution of the Lesser Antilles Arc and Guadeloupe volcanic system.
Colloque 2012 du Comité National Français de Géodésie et Géophysique (CNFGG)
Clermont-Ferrand, France

hal-00742653
https://hal-brgm.archives-ouvertes.fr/hal-00742653
https://hal-brgm.archives-ouvertes.fr/hal-00742653/document
https://hal-brgm.archives-ouvertes.fr/hal-00742653/file/CNFGG_Caraibes.pdf

Éditeur(s) : HAL CCSD Springer-Verlag
Résumé : International audience
With hull-mounted multibeam echosounder data, wereport for the first time along the active Ecuadorian margin,acoustic signatures of water column fluid emissions and seep-relatedstructures on the seafloor. In total 17 flare-shaped acousticanomalies were detected from the upper slope (1250 m) to the shelfbreak (140 m). Nearly half of the flare-shaped acoustic anomaliesrise 200–500 m above the seafloor. The base of the flares is generallyassociated with high-reflectivity backscatter patchescontrasting with the neighboring seafloor. We interpret these flaresas caused by fluid escape in the water column, most likely gases.High-resolution seismic profiles show that most flares occur closeto the surface expression of active faults, deformed areas, slopeinstabilities or diapiric structures. In two areas tectonic deformationdisrupts a Bottom Simulating Reflector (BSR), suggesting thatburied frozen gas hydrates are destabilized, thus supplying free gasemissions and related flares. This discovery is important as it opensthe way to determine the nature and origin of the emitted fluids andtheir potential link with the hydrocarbon system of the forearcbasins along the Ecuadorian margin.
ISSN: 0033-4533

insu-01267238
https://hal-insu.archives-ouvertes.fr/insu-01267238
DOI : 10.1007/s00024-015-1230-7

Éditeur(s) : HAL CCSD European Geosciences Union (EGU)
Résumé : International audience
Storms and tsunamis, which may seriously endanger human society, are amongst the most devastating marine catastrophes that can occur in coastal areas. Many such events are known and have been reported for the Mediterranean, a region where high-frequency occurrences of these extreme events coincides with some of the most densely populated coastal areas in the world. In a sediment core from the Mar Menor (SE Spain), we discovered eight coarse-grained layers which document marine incursions during periods of intense storm activity or tsunami events. Based on radiocarbon dating, these extreme events occurred around 5250, 4000, 3600, 3010, 2300, 1350, 650, and 80 years cal BP. No comparable events have been observed during the 20th and 21st centuries. The results indicate little likelihood of a tsunami origin for these coarse-grained layers, although historical tsunami events are recorded in this region. These periods of surge events seem to coincide with the coldest periods in Europe during the late Holocene, suggesting a control by a climatic mechanism for periods of increased storm activity. Spectral analyses performed on the sand percentage revealed four major periodicities of 1228 ± 327, 732 ± 80, 562 ± 58, and 319 ± 16 years. Amongst the well-known proxies that have revealed a millennial-scale climate variability during the Holocene, the ice-rafted debris (IRD) indices in the North Atlantic developed by Bond et al. (1997, 2001) present a cyclicity of 1470 ± 500 years, which matches the 1228 ± 327-year periodicity evidenced in the Mar Menor, considering the respective uncertainties in the periodicities. Thus, an in-phase storm activity in the western Mediterranean is found with the coldest periods in Europe and with the North Atlantic thermohaline circulation. However, further investigations, such as additional coring and high-resolution coastal imagery, are needed to better constrain the main cause of these multiple events.
ISSN: 1814-9324

hal-01357199
https://hal.archives-ouvertes.fr/hal-01357199
https://hal.archives-ouvertes.fr/hal-01357199v2/document
https://hal.archives-ouvertes.fr/hal-01357199/file/cp-12-1389-2016.pdf
DOI : 10.5194/cp-12-1389-2016

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
We have inferred the deformation mechanisms of antigorite by high-resolution EBSD mapping of samples from Cerro del Almirez ultramafic massif (Betic Cordillera, SE Spain). Textural relations and phase diagram calculations constrain the foliation development conditions to the subduction prograde path at up to 600-630 °C and 1.6-1.9 GPa. Deformation was followed by static annealing of antigorite at ca. 680 °C. The Crystal Preferred Orientation (CPO) of antigorite is characterised by a strong alignment of (001) poles normal to the foliation plane and a weaker, but clear, parallelism between [100] axes and the macroscopic lineation defined by the elongation of magnetite aggregates. Analysis of misorientations across subgrains shows predominance of [010] rotation axis, consistent with activation of the [100](001) slip system. However, tilt subgrain boundaries subparallel to (100), probably formed by edge dislocations of this system, are subsidiary. Most subgrain boundaries are subparallel to (001) planes. They are interpreted as (001) twins wherein continuing viscoplastic deformation resulted in a slight increase of the misorientation between the twins. Modelling of the evolution of the antigorite CPO using a lower bound approach and considering different deformation regimes and sets of basal and non-basal slip systems has shown that intensities of [100] and [010] maxima reflect the relative strength of the antigorite [100](001) and [010](001) systems. Activation of other basal or non-basal slip systems does not change significantly the CPO patterns, but results in less concentrated CPO. 3D transpression models better reproduce the CPO of natural antigorite serpentinites. We propose that the widespread occurrence of strong CPO in high-pressure antigorite serpentinite is consistent with deformation by dislocation creep with dominant glide on [hk0](001), together with the activation of twinning, implying that a power law rheology would better account for the mechanical behaviour of antigorite serpentinite deep in the subduction channel and mantle wedge.
ISSN: 0012-821X

hal-00795511
https://hal.archives-ouvertes.fr/hal-00795511
DOI : 10.1016/j.epsl.2012.06.049

Éditeur(s) : Université de Pau et des Pays de l'Adour
Résumé : In a context of decline of European eel (Anguilla anguilla L.) and search for biological markers of habitat use and quality, a multidisciplinary approach was engaged on the Adour estuary and its associated wetlands. Two axes were developed. The first axe aimed at highlighting the successive presence of the species in different ecosystems based on the otolith elemental composition. The second aimed at the evaluation of the chemical pressure underwent by eels based on the contaminant bioconcentration in soft tissues and the early molecular response to the chemical stress. With a view to the analyses of otolith elemental composition taking into account the 3D structure, the low elemental concentration in the matrix and keeping the finest spatial resolution, four micro sampling strategies and multi elemental analyses using femtosecond laser ablation ICP-MS were tested (crater, 1D scan, 2D scan, flash ablation). The strategy showing the best compromise according to the objectives (continuous recording, multi elemental approach) was applied on otolith of yellow eels from the Adour. The simultaneous use of Sr and Ba profiles, after validation, represents a new tool, easy, fast and reliable for the reconstruction of freshwater and brackish ecosystems use by eel avoiding misinterpretation due to vaterite inclusions. Three major behaviors were highlighted on the Adour: a residency in brackish water, a residency in freshwater and nomad behavior. The last one is illustrated by a shift to brackish water after three to four years spent in freshwater. Simultaneously, the study of inorganic and organic contamination of eel soft tissues showed that sampled wetlands are moderately contaminated. These results were confirmed by the first estimation, in wild conditions, of the early response to the chemical stress using the hepatic expression of CYP1A1 gene measured by real time RT-PCR. Conversely, in the downstream part of the Adour estuary, Hg loads in eels, especially methyl mercury, and PCBs analyses indicate values that need further investigations considering the European norms of consumption. The comparison of the different markers used (heavy metal and organochlorinated compounds contamination of soft tissues, condition index) support a lower quality of the estuary despite higher eel growth rate on this site. This study supports the use of numerous markers in integrated studies in order to understand and specify the relationships between eels and their continental growth zones.
Dans un contexte de déclin de l'anguille européenne (Anguilla anguilla L.) et de recherche de marqueurs biologiques retraçant la fréquentation des divers habitats et renseignant sur la qualité de ceux-ci, une approche pluridisciplinaire a été mise en place sur l'estuaire de l'Adour et ses zones humides. Deux axes ont été privilégiés. Le premier cherchait à visualiser la présence successive de l'espèce dans différents écosystèmes en se basant sur la composition élémentaire des otolithes. Le deuxième avait pour but d'évaluer la pression chimique inorganique et organique subie par l'anguille dans les zones d'études en s'appuyant sur la bioconcentration des contaminants dans les tissus mous et la réponse moléculaire précoce au stress chimique. En vue des analyses de la composition élémentaire des otolithes et pour répondre au mieux à la structure en trois dimensions, à la faible concentration des éléments dans la matrice tout en conservant une résolution spatiale la plus fine possible, quatre stratégies de micro-échantillonnage et d'analyses multiélémentaires par ablation laser femtoseconde ICP-MS ont été testées (cratère, scan 1D, scan 2D, ablation flash). La méthodologie présentant le meilleur compromis par rapport aux objectifs fixés (enregistrement continu, approche multiélémentaire) a ensuite été appliquée sur les otolithes d'anguilles jaunes du Bas-Adour. L'utilisation simultanée des profils continus de Sr et de Ba, après validation, constitue un outil facile d'utilisation, rapide et fiable pour reconstruire les historiques de fréquentation des différents écosystèmes estuariens et dulçaquicoles par l'anguille tout en s'affranchissant des problèmes potentiels liés aux inclusions de vatérite, un polymorphe du carbonate de calcium. Trois grands types de comportement ont pu être mis en évidence sur l'Adour : résidence en eau saumâtre, résidence en eau douce et nomadisme. Ce dernier est plus particulièrement illustré par un mouvement marqué vers l'eau saumâtre pour des individus ayant passé de trois à quatre ans dans l'eau douce. Parallèlement, l'étude de la contamination organique et inorganique des tissus mous de l'anguille a permis de déduire à la faible contamination des zones humides échantillonnées. La première estimation en condition naturelle de la réponse précoce au stress chimique par évaluation de l'expression hépatique du gène CYP1A1 par RT-PCR en temps réel confirme ces résultats. En revanche, dans la partie estuarienne aval de l'Adour, les niveaux en Hg, présent en majorité sous sa forme méthylée dans les anguilles, et l'analyse des PCBs indiquent des valeurs qui suscitent un examen plus approfondi au regard des normes européennes en vigueur. La confrontation des différents descripteurs (contamination des tissus mous par les métaux lourds et organochlorés, indice de condition) utilisés conforte la qualité moindre de la zone estuarienne malgré des performances de croissance de l'anguille favorisées sur ces sites. Ainsi, cette étude supporte l'intérêt de la mise en oeuvre de descripteurs multiples utilisés (niveaux de métaux lourds et organochlorés dans les tissus mous, réponse moléculaire au stress chimique, microchimie de l'otolithe, indice de condition, taux de croissance) dans des approches intégrées pour comprendre et préciser les relations existantes entre l'anguille et ses zones de croissance continentales.

Droits : info:eu-repo/semantics/openAccess
http://archimer.ifremer.fr/doc/2009/these-7381.pdf
http://archimer.ifremer.fr/doc/00000/7381/

Éditeur(s) : HAL CCSD PeerJ
Résumé : International audience
Understanding the role of predators in food webs can be challenging in highly diverse predator/prey systems composed of small cryptic species. DNA based dietary analysis can supplement predator removal experiments and provide high resolution for prey identification. Here we use a metabarcoding approach to provide initial insights into the diet and functional role of coral-dwelling predatory fish feeding on small invertebrates. Fish were collected in Moorea (French Polynesia) where the BIOCODE project has generated DNA barcodes for numerous coral associated invertebrate species. Pyrosequencing data revealed a total of 292 Operational Taxonomic Units (OTU) in the gut contents of the arc-eye hawkfish (Paracirrhites arcatus), the flame hawkfish (Neocirrhites armatus) and the coral croucher (Caracanthus maculatus). One hundred forty-nine (51%) of them had species-level matches in reference libraries (>98% similarity) while 76 additional OTUs (26%) could be identified to higher taxonomic levels. Decapods that have a mutualistic relationship with Pocillopora and are typically dominant among coral branches, represent a minor contribution of the predators' diets. Instead, predators mainly consumed transient species including pelagic taxa such as copepods, chaetognaths and siphonophores suggesting non random feeding behavior. We also identified prey species known to have direct negative interactions with stony corals, such as Hapalocarcinus sp, a gall crab considered a coral parasite, as well as species of vermetid snails known for their deleterious effects on coral growth. Pocillopora DNA accounted for 20.8% and 20.1% of total number of sequences in the guts of the flame hawkfish and coral croucher but it was not detected in the guts of the arc-eye hawkfish. Comparison of diets among the three fishes demonstrates remarkable partitioning with nearly 80% of prey items consumed by only one predator. Overall, the taxonomic resolution provided by the metabarcoding approach highlights a highly complex interaction web and demonstrates that levels of trophic partitioning among coral reef fishes have likely been underestimated. Therefore, we strongly encourage further empirical approaches to dietary studies prior to making assumptions of trophic equivalency in food web reconstruction. How to cite this article Leray et al. (2015), Metabarcoding dietary analysis of coral dwelling predatory fish demonstrates the minor contribution of coral mutualists to their highly partitioned, generalist diet. PeerJ 3:e1047
ISSN: 2167-8359

Droits : http://creativecommons.org/licenses/by/
hal-01174184
https://hal-univ-perp.archives-ouvertes.fr/hal-01174184
https://hal-univ-perp.archives-ouvertes.fr/hal-01174184/document
https://hal-univ-perp.archives-ouvertes.fr/hal-01174184/file/peerj-1047.pdf
DOI : 10.7717/peerj.1047

Éditeur(s) : HAL CCSD
Résumé : Among erosion processes, river incision is classicaly described as a key process controlling erosion of landscapes. Incision efficiency is mainly influenced by climate and erodibility. This latter is not only dependent on the nature of the bedrock, but also on its past deformation, which affects its rheological effective properties, such as fracture density. The main objectives of this thesis are: (1) to better constrain the relationship between effective properties and erodibility, and (2) to quantify the influence of erodibility and erosion on both the temporal and spatial building or decay of the topography. Several numerical tools are developed. A 1D formalism of landscape evolution is introduced, including river incision with stochastic distribution of water discharge and hillslope landsliding. A new remeshing algorithm called Surface Lagrangian Remeshing (SLR) is developed as a complement to remeshing algorithms dealing with internal elements. It allows one to take into account long-term erosion into 2D Lagrangian numerical codes based on triangular finite elements. Then the potentiality of measuring erodibility in-situ using a Schmidt hammer (R) is assessed for the active orogen of Taiwan, the diagenetic Annot sandstones and St Clement fault zone. Results suggest a strong control of R by effective properties. A linear model based on effective medium theory is applied to a fault zone with an unmacthed resolution (750 measures, 25 measures per square meter). The model successfully correlates R to fracture density. These results demonstrate that effective elasticity as well as erodibility are sensitive to the density and type of fractures. Finally I focus on the erosional and rheological conditions that allows reproducing post-orogenic evolution of mountain belts. A model coupling surface erosion and regional isostatic uplift is consistent with observations. The topographic decay and decrease of the ratio of surface elevation over crustal root thickness is at first order controlled by the initial geometry of the mountain belt and erosion efficiency. This new model highlights the control ofclimate and erodibility on the topographic decay and of lithospheric rheology on the perseverance of crustal roots.
Parmi les processus d'érosion, l'incision des rivières est classiquement décrit comme un processus clé contrôlant l'érosion des paysages. L'efficacité de l'incision est principalement influencée par le climat et par l'érodabilité. Ce dernier paramètre ne dépend pas seulement de la nature du substratum rocheux, mais aussi de sa déformation passée qui affecte ses propriétés rhéologiques équivalentes. Les principaux objectifs de cette thèse sont: (1) de mieux contraindre les relations entre propriétés équivalentes et érodabilité, et (2) de quantifier l'influence de l'érosion et de l'érodabilité sur la formation ou la décadence, spatiale et temporelle, de la topographie. Plusieurs outils numériques sont développés. Un formalisme 1D d'évolution des paysages est proposé, prenant en compte simultanément l'incision des rivières avec une distribution stochastique des débits en eau et l'érosion des versants par glissements de terrain. Un nouvel algorithme de remaillage appelé Surface Lagrangian Remeshing (SLR) est développé. Il permet de prendre en compte l'érosion à long terme dans les codes numériques 2D Lagrangiens basés sur des éléments finis triangulaires. Ensuite, la possibilité de mesurer in-situ l'érodabilité avec un marteau de Schmidt (R) est évaluée pour: l'orogène actif de Taiwan, les grès diagénétiques d'Annot et la zone de faille de St Clément. Les résultats suggèrent un fort contrôle de R par les propriétés équivalentes des roches testées. Un modèle linéaire, basé sur la théorie des milieux équivalents, est appliqué à une zone de faille avec une résolution inégalée (750 mesures, 25 mesures par mètre carré). Le modèle permet de corréler avec succès la densité de fracture et R. Ces résultats démontrent empiriquement que l'élasticité équivalente ainsi que l'érodabilité sont sensibles à la densité et à la nature des fractures. Enfin j'étudie les conditions d'érosion et de rhéologie qui permettent de reproduire l'évolution des chaînes de montagnes post-orogéniques. Un modèle couplant érosion en surface et soulèvement isostatique régional est compatible avec les observations. Les taux de décroissance topographique et de diminution du rapport de l'élévation de surface sur l'épaisseur de racine crustale sont contrôlés au premier ordre par la géométrie initiale de la chaîne de montagne et par l'efficacité de l'érosion. Ce nouveau modèle met en évidence le contrôle du climat et de l'érodabilité sur la décroissance topographique et de la rhéologie lithosphérique sur la persévérance des racines crustales.
https://tel.archives-ouvertes.fr/tel-00602341

tel-00602341
https://tel.archives-ouvertes.fr/tel-00602341
https://tel.archives-ouvertes.fr/tel-00602341/document
https://tel.archives-ouvertes.fr/tel-00602341/file/thesephilippesteer.pdf

Éditeur(s) : HAL CCSD Société géologique de France
Résumé : International audience
Guadeloupe island (West French Indies) is one of the twenty islands that compose the Lesser Antilles arc, which results from the subduction of the Atlantic ocean plate beneath the Caribbean one. The island lies in a complex volcano-tectonic system and the need to understand its geological context has led to numerous on- and offshore geophysical investigations. This work presents a compilation and the processing of available, on-land, airborne and marine, gravity and magnetic data acquired during the last 40 years on Guadeloupe islands and at the scale of the Lesser Antilles arc. The overall dataset provides new Bouguer and reduced to the pole magnetic anomaly maps at the highest achievable resolution. Regionally, the main central negative gravity trend of the arc allows defining two subsident areas. The first one is parallel to the arc direction (~N160°E) to the north, whereas the second unexpected southern one is oriented parallel to oceanic ridges (N130°E). Along the Outer arc, the long wavelength positive anomaly is interpreted, at least along the Karukera spur, as an up-rise of the volcanic basement in agreement with the seismic studies. To the NE of Guadeloupe, the detailed analysis of the geophysical anomalies outlines a series of structural discontinuities consistent with the main bathymetric morphologies, and in continuity of the main fault systems already reported in this area. Based on geophysical evidences, this large scale deformation and faulting of the Outer arc presumably primarily affects the Atlantic subducting plate and secondarily deforms the upper Caribbean plate and the accretion prism, as evidenced in bathymetry as well as on the islands. At the scale of Guadeloupe island, combined gravity and magnetic modeling has been initiated based on existing interpretation of old seismic refraction profiles, with a general structure in three main layers. According to our geophysical anomalies, additional local structures are also modeled in agreement with geological observations: i) the gravity and magnetic signals confirm an up-rise of the volcanic basement below the limestone platforms outcropping on Grande-Terre island ; ii) the ancient volcanic complexes of Basse-Terre island are modeled with high density and reverse magnetized formations; iii) the recent volcanic centre is associated with formations consistent with the low measured density and the underlying hydrothermal system. The E-W models coherently image a NNW-SSE depression structure in half-graben beneath Basse-Terre island, its western scarp following the arc direction in agreement with bathymetric and seismic studies to the north of the island. The so-defined depressed area, and particularly its opening in half-graben toward the SW, is interpreted as the present-day front of deformation of the upper plate, associated with the recent volcanic activity on and around Guadeloupe. Based on this regional deformation model, perspectives are given for further integrated investigation of key targets to address the internal structure and evolution of the Lesser Antilles arc and Guadeloupe volcanic system.
EISSN: 1777-5817

hal-00853352
https://hal.archives-ouvertes.fr/hal-00853352
DOI : 10.2113/gssgfbull.184.1-2.77

Éditeur(s) : Elsevier
Résumé : High-resolution reflection and refraction seismic data were collected in 2004 to investigate, in further detail than allowed by pre-existing low resolution seismic data, the nature of a Bottom Simulating Reflector (BSR) that extends over a broad area of the Fairway Basin, a rifted, continental structure located on the eastern flank of the Lord Howe Rise, to the southwest of New Caledonia. Two main reflectors are documented: the shallower (RN) mimics the seafloor and has a negative polarity while the deeper (RP) does not always mimic the seafloor and has a positive polarity. Using the existing regional seismic lines, we can show that reflector RN can be continuously followed up to DSDP 208 drill hole site. Reflector RP is discontinuous and cannot be traced to DSDP 208. Based on DSDP 208 stratigraphic data, Reflector RN is assigned to the Eocene/Oligocene regional unconformity; reflector RP is interpreted in terms of a diagenetic BSR, likely related to an Opal-A/Opal-CT transition front. Heat flow data collected in 2006 suggest that reflector RP lies too deep to be related to methane hydrates, strengthening our interpretation that RP is of diagenetic origin.
Marine Geology (0025-3227) (Elsevier), 2009-10 , Vol. 266 , N. 1-4 , P. 80-90

Droits : 2009 Elsevier B.V. All rights reserved.
http://archimer.ifremer.fr/doc/2009/publication-7321.pdf
DOI:10.1016/j.margeo.2009.07.014
http://archimer.ifremer.fr/doc/00000/7321/

Éditeur(s) : HAL CCSD AGU and the Geochemical Society
Résumé : International audience
The South Pacific region is characterized by a broadly elevated seafloor known as the South Pacific superswell. This region has a concentration of midplate volcanoes that experienced massive eruptions in the mid-Cretaceous period (90-120 Ma). These characteristics suggest the presence of a large-scale mantle plume beneath the South Pacific, called the South Pacific superplume. The geometry, origin depth, temperature, and composition of the superplume remain controversial, however, mainly due to the lack of seismological data that documents the mantle structure beneath the South Pacific. Seismic stations are sparse in the area due to its remote ocean environment. To obtain a better seismic image of the superplume, we deployed temporary broadband seismographs on oceanic islands and the seafloor in the South Pacific, which made possible the highest spatial resolution that has ever been achieved for the mantle structure beneath the region. The seismic image obtained from this new seismic data indicates that large-scale low-velocity anomalies (on the order of 1000 km in diameter), indicative of the superplume, are located from the bottom of the mantle to a depth of 1000 km, and small-scale low-velocity anomalies (on the order of 100 km in diameter) are present above it. A comparison of the seismic image with recent mantle convection studies based upon laboratory and numerical experiments suggests that the superplume may be a hot and chemically distinct mantle dome, and that the small-scale anomalies may be narrow plumes generated from the top of the dome. This model may explain various characteristics of hot spots in the South Pacific, such as the seafloor swell, short-lived hot spot chains, and the periodicity of massive eruptions.
ISSN: 1525-2027

hal-00443845
https://hal.archives-ouvertes.fr/hal-00443845
https://hal.archives-ouvertes.fr/hal-00443845/document
https://hal.archives-ouvertes.fr/hal-00443845/file/Suetsugu_PLUME_tomo_G32009_hal.pdf
DOI : 10.1029/2009GC002533

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The present study aims at better deciphering the different mechanisms involved in the functioning of the subduction interplate. A 2D thermo-mechanical model is used to simulate a subduction channel, made of oceanic crust, free to evolve. Convergence at constant rate is imposed under a 100 km thick upper plate. Pseudo-brittle and non-Newtonian behaviours are modelled. The influence of the subduction channel strength, parameterized by the difference in activation energy between crust and mantle () is investigated to examine in detail the variations in depth of the subduction plane down-dip extent, . First, simulations show that numerical resolution may be responsible for an artificial and significant shallowing of if the weak crustal layer is not correctly resolved. Second, if the age of the subducting plate is 100 Myr, subduction occurs for any . The stiffer the crust is, that is, the lower is, the shallower is (60 km depth if kJ/mol) and the hotter the fore-arc base is. Conversely, imposing a very weak subduction channel ( J/mol) leads there to an extreme mantle wedge cooling and inhibits mantle melting in wet conditions. Partial kinematic coupling at the fore-arc base occurs if kJ/mol. If the incoming plate is 20 Myr old, subduction can occur under the conditions that the crust is either stiff and denser than the mantle, or weak and buoyant. In the latter condition, cold crust plumes rise from the subduction channel and ascend through the upper lithosphere, triggering (1) partial kinematic coupling under the fore-arc, (2) fore-arc lithosphere cooling, and (3) partial or complete hindrance of wet mantle melting. then ranges from 50 to more than 250 km depth and is time-dependent if crust plumes form. Finally, subduction plane dynamics is intimately linked to the regime of subduction-induced corner flow. Two different intervals of are underlined: 80–120 kJ/mol to reproduce the range of slab surface temperature inferred from geothermometry, and 10–40 kJ/mol to reproduce the shallow hot mantle wedge core inferred from conditions of last equilibration of near-primary arc magmas and seismic tomographies. Therefore, an extra process controlling mantle wedge dynamics is needed to satisfy simultaneously the aforementioned observations. A mantle viscosity reduction, by a factor 4–20, caused by metasomatism in the mantle wedge is proposed. From these results, I conclude that the subduction channel down-dip extent, , should depend on the subduction setting, to be consistent with the observed variability of sub-arc depths of the subducting plate surface.
ISSN: 0031-9201

hal-01623155
https://hal.archives-ouvertes.fr/hal-01623155
DOI : 10.1016/j.pepi.2017.05.008

Éditeur(s) : HAL CCSD
Résumé : Session "Posters"
National audience
Nous présentons une méthode permettant la mesure complète de la pose de la tête lors de captures vidéo monoculaires. Ce procédé utilise un modèle de visage et de texture précis. Le modèle facial, construit à partir d'une distribution de scans 3D haute résolution de visages, permet de générer des densités adaptées aux résolutions effectives. L'étape d'initialisation de la position du modèle est cruciale car elle conditionne le suivi ultérieur de la pose. Nous proposons ainsi d'utiliser une métrique composite construite sur des textures extraites de trois bases de données différentes. L'algorithme est alors capable de suivre le visage dans de vastes plages de poses avec une grande précision. Nous proposons des séquences vidéo de test dotées de vérité-terrain de pose précise et indépendante (précision de 0.1 degrés RMS)
Actes de la conférence RFIA 2012
Lyon, France

hal-00656565
https://hal.archives-ouvertes.fr/hal-00656565
https://hal.archives-ouvertes.fr/hal-00656565/document
https://hal.archives-ouvertes.fr/hal-00656565/file/rfia2012_submission_118.pdf

Éditeur(s) : HAL CCSD Geological Society of America
Résumé : International audience
Lakes are major depositional systems for which the related depositional processes have long been considered relatively simple. Breaking this statement, this study presents a detailed analysis of deposits in Lake Saint-Jean, the third largest natural lake in Québec. In addition to postglacial deltaic and coastal depositional systems fringing the lake, current-controlled features such as a large subaqueous prograding wedge and three sediment drifts have been identifi ed in its central portion based on two-dimensional (2-D) acoustic high-resolution subbottom profiles. The large subaqueous prograding wedge is a 4-km-long and up to 15-m-thick heterolithic shelf-like construction in the southeastern part of the lake. The three sediment drifts are 0.1–0.5-km-long and 2–5-mthick mud mounds distributed on the lake floor in the central portion of the lake. Diatom analyses and radiocarbon dating show that the development of these current-controlled features occurred during the lacustrine phase, after the disconnection with the postglacial marine Laflamme Gulf at 8.5 cal. k.y. B.P. Depositional facies show evidence of recurrent bottom-current activity. Related deposits alternate with pelagic sedimentation stages characterized by the settling of mud and biogenic accumulations. We investigated the origin of bottom currents using a numerical simulation (SYMPHONIE, an oceanographic model), with the aim of modeling wind-induced lake-scale water circulation. Simulations suggest that the subaqueous prograding wedge and the three sediment drifts result from wind-induced bottom currents generated by storm events having wind speed greater than 10 m s–1. Such strong winds are able to significantly affect sedimentation in the central portion of Lake Saint-Jean. Theresulting wind-induced sedimentary features were integrated into a refi ned lacustrine depositional model that summarizes the evolution of a group of water bodies referred to as “wind-driven water bodies.” This study applies a new tool for lake strata characterization and highlights the potential diffi cultyin differentiating them from marine deposits in the geological record.
ISSN: 0016-7606

insu-01184724
https://hal-insu.archives-ouvertes.fr/insu-01184724
DOI : 10.1130/B31145.1

Éditeur(s) : Université Paris 7 – Denis Diderot
Résumé : Sea surface salinity (SSS) influences numerous oceanic phenomena, for instance surface water ventilation, deep water formation and thermohaline circulation. SSS also controls some ocean-atmosphere coupled processes, such as the intensity of freshwater flux and the penetration of heat flux and turbulence. Salinity is more difficult to measure than temperature from in situ surveys, which results in 20 times less data being currently available. Moreover, sea surface temperature (SST) is routinely estimated from satellites, which is not possible yet for SSS. Two space missions will fill this gap soon: SMOS from the European Space Agency and Aquarius/SAC-D from NASA and CONAE. To contribute to the SMOS project, we propose a method for estimating SSS from current satellite observations and for studying the mechanisms governing its variability. We developed a simplified model of the ocean mixed layer, based on the "slab mixed layer" formulation (Frankignoul et Hasselmann, 1977). This 2D horizontal model is implemented over the global ocean, using a near 100 km resolution, and integrated during a climatological year. Air-sea fluxes are taken from the ECMWF meteorological model (ERA40 reanalysis) and the surface currents are provided by altimeter data (SSALTO-DUACS analysis). The mixed layer depth (MLD) is derived from SST observations, using an original inversion technique. The MLD fields obtained from this inversion are well correlated to in situ estimates. This effective depth represents the air-sea fluxes penetration and ensures consistency between fluxes, les currents and SST. We first validate the simulation through examination of the heat balance in north-eastern Atlantic, by comparing to measurements and models from the POMME experiment. Then we study the salinity balance in the global domain, in terms of its geographical distribution and seasonal evolution. Equilibrium between the various processes appears generally more complex than for temperature. Noteworthy, the role of atmospheric flux is less predominant (22%), while geostrophic advection (33%) and diapycnal mixing (22%) contribute more strongly. Our results indicate this model succeeds in reconstructing SSS variability over most of the oceans. Daily SSS variations are also simulated, whereas they are not represented in current observed data at a global scale. Owing to its simplicity and fast computation, the model will be useful to the SMOS mission. It can help for the measurement calibration/validation and provide a first guess estimate to the sophisticated algorithm required for SSS restitution.
La salinité de surface des océans (SSS) influence de nombreux phénomènes océaniques, parmi lesquels la ventilation des eaux de surface, la formation d'eaux profondes et la circulation thermohaline. Elle détermine aussi certains processus couplés océan-atmosphère, notamment l'intensité du flux d'eau douce, la pénétration du flux de chaleur et de la turbulence. La mesure in situ de salinité est plus compliquée que celle de température, si bien qu'on dispose actuellement de 20 fois moins de données pour cette propriété. De plus, la température de surface (SST) est couramment estimée par satellite, ce qui n'est pas encore le cas de la SSS. Deux missions spatiales vont prochainement combler cette lacune : le satellite SMOS de l'Agence Spatiale Européenne et le satellite Aquarius/SAC-D de la NASA et de la CONAE. En préparation du projet SMOS, nous proposons une méthode pour estimer la SSS à partir des observations satellitaires actuelles et étudier les mécanismes de sa variabilité. Nous avons développé un modèle simplifié de couche mélangée océanique, basé sur la formulation "slab mixed layer" (Frankignoul et Hasselmann, 1977). Ce modèle 2D horizontal est implémenté sur l'océan global, avec une résolution proche de 100 km, et intégré au cours d'une année climatologique. Les flux air-mer proviennent du modèle météorologique ECMWF (réanalyse ERA40) et les courants de surface sont issus de l'altimétrie (analyse SSALTO-DUACS). La profondeur de la couche mélangée (MLD) est dérivée des observations de SST, grâce à une technique d'inversion originale. La MLD obtenue par inversion est bien corrélée aux estimations basées sur des données in situ. Cette profondeur effective représente la pénétration des flux air-mer et assure la cohérence entre les flux, les courants et la SST. La simulation est d'abord validée en examinant le bilan de chaleur dans l'Atlantique Nord-Est, par comparaison aux mesures et aux modèles de l'expérience POMME. Puis le bilan de salinité est étudié dans le domaine global, en termes de distribution géographique et d'évolution saisonnière. L'équilibre entre les différents processus est généralement plus complexe que pour la température. Notamment, le rôle du flux atmosphérique est moins prépondérant (22%), tandis que l'advection géostrophique (33%) et le mélange diapycnal (22%) contribuent fortement. Nos résultats montrent que ce modèle parvient à restituer la variabilité de la SSS sur la majeure partie des océans. Le modèle simule aussi les variations journalières de SSS, qui ne sont pas représentées à l'échelle globale dans les observations actuelles. Grâce à sa simplicité et à sa rapidité, le modèle pourra être utile dans le cadre de SMOS. Il pourra aider à la calibration/validation de la mesure et fournir une estimation a priori pour l'algorithme complexe nécessaire à la restitution de la SSS.

Droits : info:eu-repo/semantics/openAccess
http://archimer.ifremer.fr/doc/2006/these-2302.pdf
http://archimer.ifremer.fr/doc/00000/2302/

Éditeur(s) : Elsevier Science Bv
Résumé : We present the results from a new grid of deep penetration multichannel seismic (MCS) profiles over the 280-km-long north-central segment of the Lesser Antilles subduction zone. The 14 dip-lines and 7 strike-lines image the topographical variations of (i) the subduction interplate décollement, (ii) the top of the arcward subducting Atlantic oceanic crust (TOC) under the huge accretionary wedge up to 7 km thick, and (iii) the trenchward dipping basement of the deeply buried forearc backstop of the Caribbean upper plate. The four northernmost long dip-lines of this new MCS grid reveal several-kilometres-high topographic variations of the TOC beneath the accretionary wedge offshore Guadeloupe and Antigua islands. They are located in the prolongation of those mapped on the Atlantic seafloor entering subduction, such as the Barracuda Ridge. This MCS grid also provides unexpected evidences on huge along-strike topographical variation of the backstop basement and of the deformation style affecting the outer forearc crust and sediments. Their mapping clearly indicates two principal areas of active deformation in the prolongation of the major Barracuda and Tiburon ridges and also other forearc basement highs that correspond to the prolongation of smaller oceanic basement highs recently mapped on the Atlantic seafloor. Although different in detail, the two main deforming forearc domains share similarities in style. The imaged deformation of the sedimentary stratification reveals a time- and space-dependent faulting by successive warping and unwarping, which deformation can be readily attributed to the forearc backstop sweeping over the two obliquely-oriented elongated and localized topographical ridges. The induced faulting producing vertical scarps in this transport does not require a regional arc-parallel extensional regime as proposed for the inner forearc domain, and may support a partitioned tectonic deformation such as in the case of an outer forearc sliver. A contrasted reflectivity of the sedimentary layering at the transition between the outer forearc and accretionary domains was resolved and used to define the seaward edge of the outer forearc basement interpreted as being possibly a proxy to the updip limit of the interplate seismogenic zone. Its mapping documents along-arc variations of some tens of kilometres the subduction backstop with respect to the negative gravity anomaly commonly taken as marking the subduction trench. With the exception of the southernmost part, the newly mapped updip limit reaches 25 km closer to the trench, thus indicating a possible wider seismogenic zone over almost the whole length of the study area.
Tectonophysics (0040-1951) (Elsevier Science Bv), 2013-09 , Vol. 603 , P. 32-54

Droits : 2013 Elsevier B.V. All rights reserved
http://archimer.ifremer.fr/doc/00139/25003/23109.pdf
DOI:10.1016/j.tecto.2013.05.028
http://archimer.ifremer.fr/doc/00139/25003/

Éditeur(s) : Pergamon-elsevier Science Ltd
Résumé : Society's needs for a network of in situ ocean observing systems cross many areas of earth and marine science. Here we review the science themes that benefit from data supplied from ocean observatories. Understanding from existing studies is fragmented to the extent that it lacks the coherent long-term monitoring needed to address questions at the scales essential to understand climate change and improve geo-hazard early warning. Data sets from the deep sea are particularly rare with long-term data available from only a few locations worldwide. These science areas have impacts on societal health and well-being and our awareness of ocean function in a shifting climate. Substantial efforts are underway to realise a network of open-ocean observatories around European Seas that will operate over multiple decades. Some systems are already collecting high-resolution data from surface, water column, seafloor, and sub-seafloor sensors linked to shore by satellite or cable connection in real or near-real time, along with samples and other data collected in a delayed mode. We expect that such observatories will contribute to answering major ocean science questions including: How can monitoring of factors such as seismic activity, pore fluid chemistry and pressure, and gas hydrate stability improve seismic, slope failure, and tsunami warning? What aspects of physical oceanography, biogeochemical cycling, and ecosystems will be most sensitive to climatic and anthropogenic change? What are natural versus anthropogenic changes? Most fundamentally, how are marine processes that occur at differing scales related? The development of ocean observatories provides a substantial opportunity for ocean science to evolve in Europe. Here we also describe some basic attributes of network design. Observatory networks provide the means to coordinate and integrate the collection of standardised data capable of bridging measurement scales across a dispersed area in European Seas adding needed certainty to estimates of future oceanic conditions. Observatory data can be analysed along with other data such as those from satellites, drifting floats, autonomous underwater vehicles, model analysis, and the known distribution and abundances of marine fauna in order to address some of the questions posed above. Standardised methods for information management are also becoming established to ensure better accessibility and traceability of these data sets and ultimately to increase their use for societal benefit. The connection of ocean observatory effort into larger frameworks including the Global Earth Observation System of Systems (GEOSS) and the Global Monitoring of Environment and Security (GMES) is integral to its success. It is in a greater integrated framework that the full potential of the component systems will be realised. Crown Copyright (C) 2011 Published by Elsevier Ltd. All rights reserved.
Progress In Oceanography (0079-6611) (Pergamon-elsevier Science Ltd), 2011-10 , Vol. 91 , N. 1 , P. 1-33

Droits : 2011 Published by Elsevier Ltd. All rights reserved.
http://archimer.ifremer.fr/doc/00044/15557/15923.pdf
DOI:10.1016/j.pocean.2011.05.001
http://archimer.ifremer.fr/doc/00044/15557/

Éditeur(s) : Public Library Science
Résumé : The European Union and other states are moving towards Ecosystem Based Fisheries Management to balance food production and security with wider ecosystem concerns. Fishing is only one of several sectors operating within the ocean environment, competing for renewable and non-renewable resources that overlap in a limited space. Other sectors include marine mining, energy generation, recreation, transport and conservation. Trade-offs of these competing sectors are already part of the process but attempts to detail how the seas are being utilised have been primarily based on compilations of data on human activity at large spatial scales. Advances including satellite and shipping automatic tracking enable investigation of factors influencing fishers' choice of fishing grounds at spatial scales relevant to decision-making, including the presence or avoidance of activities by other sectors. We analyse the determinants of English and Welsh scallop-dredging fleet behaviour, including competing sectors, operating in the eastern English Channel. Results indicate aggregate mining activity, maritime traffic, increased fishing costs, and the English inshore 6 and French 12 nautical mile limits negatively impact fishers' likelihood of fishing in otherwise suitable areas. Past success, net-benefits and fishing within the 12 NM predispose fishers to use areas. Systematic conservation planning has yet to be widely applied in marine systems, and the dynamics of spatial overlap of fishing with other activities have not been studied at scales relevant to fisher decision-making. This study demonstrates fisher decision-making is indeed affected by the real-time presence of other sectors in an area, and therefore trade-offs which need to be accounted for in marine planning. As marine resource extraction demands intensify, governments will need to take a more proactive approach to resolving these trade-offs, and studies such as this will be required as the evidential foundation for future seascape planning.
Plos One (1932-6203) (Public Library Science), 2015-01-27 , Vol. 10 , N. 1 , P. 1-14

Droits : 2015 Tidd et al. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.
http://archimer.ifremer.fr/doc/00254/36518/35064.pdf
DOI:10.1371/journal.pone.0116335
http://archimer.ifremer.fr/doc/00254/36518/

Éditeur(s) : Université de Bucarest - Université de Bretagne occidentale
Résumé : This study is focusing on the architecture and recent sedimentary evolution of the Danube channel, the youngest channel-levee system in the Danube deep-sea fan. The study was conducted as part of the BlaSON French-Romanian Project, and combined high-resolution seismic-reflection profiles and chirp profiles with multibeam bathymetry and piston cores. This data set was acquired in 1998 during a joint survey IFREMER-GeoEcoMar of the north-western Black Sea. Previous seismic and acoustic data were also used. The Danube deep-sea fan is a large passive-margin mud-rich fan. Like the other systems of this type (Amazon fan, Mississippi fan or Indus fan) the Danube fan consists of stacked channel-levee systems intercalated with mass-transport deposits. Seismic and sedimentary facies in the Danube fan are similar to those identified in most of the mud-rich systems. Nevertheless, the Danube fan is distinguished by a specific feature: its development in a freshwater environment. This is due to the peculiar water-level history of the Black Sea controlled by the link to the Mediterranean through the Strait of Bosphorus and the Sea of Marmara. This connexion was successively interrupted (during sea level lowstands) and re-established (when the sea level was rising above the Bosphorus). Temporary absence of marine water influx during lowstands together with large freshwater inputs from the Danube and other major rivers changed the Black Sea into a freshwater lake during times of fan activity. This peculiarity possibly favourised the development of hyperpycnal flow at the Danube mouth and the initiation of turbidity currents in the deep-sea fan. The Danube channel is directly connected to the large shelf-indenting Danube canyon (also known as Viteaz canyon). The Danube canyon is deeply incised into the shelf margin for 26 km landward of the shelfbreak. During lowstands this canyon acted as the most important path for sediment supply to the deep sea in this part of the continental margin. It consists of a main trough with steep flanks, and a meandering thalweg cut into the flat canyon floor, attesting for the development of the canyon by erosion in the entrenched axial thalweg. Sections with specific morphology, orientation and gradient identified along the canyon, are interpreted as phases of landward expansion of the canyon. Internal structure of the canyon shows several erosional surfaces, which indicate that the present morphology of the canyon is the result of its polyphasic evolution. Instability in the zone of the canyon is related to the important sediment supply at the Danube mouth, to the presence of the gas in the surficial sediment, and possibly under a structural control. The upper part of the Danube channel (between the Danube canyon and ~1400 m depth) consists in a single leveed-channel that has undergone significant overbank deposition, as attested by the well-developed levees. The levees are strongly asymmetrical, being higher and wider on the right-hand side looking downstream. This type of asymmetry is rather common in deep-sea fans, and is generally attributed to the Coriolis effect (Menard, 1955). The channel is slightly sinuous, partially filled and incised by an entrenched thalweg, connected to the axial thalweg of the Danube canyon. Detailed seismic investigation inside the channel trough documented several depositional phases within the channel fill, separated by erosional surfaces. These surfaces are associated with distinct terraces identified on the multibeam bathymetry, that can be followed downward along the main trough axis. The valley fill deposits (where not removed by the subsequent erosional event) show an axial HAR (High Amplitude Reflections) seismic facies with lateral lower amplitude continuous reflections consisting in a levee facies, as proved by sampling. This indicates that filling up was associated with flow within the channel, and not with interruption of fan activity. On the middle slope below 1400 m, this single channel bifurcates through repeated avulsions. As a result, several highly meandering channels developed. The onlap relationships between these channels indicate that only one channel was active at a time. Each phase of avulsion resulted in a depositional unit consisting in a basal unchannelized lobe defined as High Amplitude Reflection Packets (HARP, Flood et al., 1991) that underlies a channel-levee system. The deposition of HARPs was associated with the readjustment of the longitudinal profile of the channel after the breaching of a levee, which resulted in remobilization of upslope channel deposits and eroded levees. When this adjustment was complete, erosion ceased and levees began to develop above the HARPs (Pirmez et al., 1997). All the identified phases of avulsion followed the same pattern: (1) breaching of the lower and narrower left levee; (2) building of a unit of High Amplitude Reflector Packets (HARP) basinward of the bifurcation point by the unchannelized flow, while the former channel was abandoned; and (3) initiation of a new meandering leveed channel. The northward migration of the resulting units through repeated bifurcations is influenced by the asymmetry between levees (hence by the Coriolis effect), and confined between the high levees of the initial phase of the Danube channel (to the south) and the steep relief of the Dniepr fan (to the north). Structure of the fan valley fill indicate that the erosional surfaces inside the upper channel could be formed in response of successive avulsions, by the adjustment of the longitudinal profile of the channel following the breaching of a levee wall. Sediments removed by erosion formed the HARP lobes basinward of the avulsion point. When this adjustment was complete, a channel-levee system developed downward of the bifurcation, overlying the HARPs, but also upward of this point, as a confined channel-levee system inside the erosional trough of the fan valley. Fluvial incisions identified on the continental shelf, together with the coastline location during the last active period of the Danube channel, indicated that the paleo-Danube was directed towards the head of the Danube canyon. Paleo-Danube mouth was fairly close (ca. 10 km) to the Danube canyon, supplying sediment to the Danube channel. Furthermore, hyperpycnal flow probably prevailed in the freshwater environment that characterized the Black Sea during times of fan activity. These conditions would have enabled the development of a quasi-continuous river-canyon-deep-sea fan system, ensuring the effective transfer of the sediment between the coastal zone and the deep sea.
Ce travail est consacré à l'étude de l'architecture et de l'évolution sédimentaire récente de l'éventail profond du Danube, en particulier de son dernier système chenal-levée: le chenal du Danube. L'étude a été réalisée dans le cadre du projet de coopération franco-roumaine BlaSON, à partir des données sismiques, bathymétriques-acoustiques et sédimentologiques acquises en 1998 lors d'une campagne en mer Noire réalisée par IFREMER et GeoEcoMar. Des données sismiques et acoustiques antérieures ont été également utilisées. L'éventail profond du Danube s'enserre dans la catégorie des grands éventails vaseux. Comme les autres systèmes de ce genre (tel que les éventails de l'Amazone, du Mississippi ou de l'Indus) il est constitué d'une succession de systèmes chenaux-levées intercalés avec des dépôts de transport en masse. Le fonctionnement de l'éventail était conditionné par la baisse du niveau marin lors des périodes glaciaires. Ses faciès sismiques et sédimentaires s'apparentent aux faciès qui caractérisent la plupart des éventails de ce type. L'éventail du Danube constitue néanmoins un cas particulier parmi les autres systèmes étudiés, du fait de son fonctionnement dans un bassin lacustre. Ceci est dû à la situation spécifique de la mer Noire dont la connexion avec la Méditerranée, par le détroit de Bosphore et la mer de Marmara, a été successivement interrompue (au cours de périodes de bas niveau) et reprise (quand le niveau marin remontait en dépassant le seuil du Bosphore). L'absence de l'apport d'eau salée pendant les périodes glaciaires, associée avec l'augmentation de l'apport fluvial, ont déterminé l'installation d'un milieu d'eau douce dans la mer Noire à chaque fois que la baisse du niveau permettait la reprise du fonctionnement de l'éventail profond. Cette situation particulière aurait favorisé la formation des courants hyperpycnaux à l'embouchure d'un fleuve du débit du Danube qui déversait ses eaux turbides dans un bassin lacustre, et aurait donc influencé l'apparition de courants de turbidité dans l'éventail profond. Le chenal du Danube s'est développé sur la pente continentale en prolongation du canyon du Danube (ou Viteaz) auquel il est directement connecté. Le canyon est incisé de manière significative (26 km) dans la plate-forme continentale. Au cours de bas-niveaux marins il constituait la principale voie de transfert des sédiments terrigènes vers le bassin profond dans cette partie de la marge. Le canyon est constitué par une entaille avec des flancs abrupts et un talweg axial incisé, qui montre l'importance du processus d'érosion du fond pour le développement du canyon. Les segments qui ont été identifiés le long du canyon, avec des morphologies, des orientations et des pentes spécifiques, sont interprétés comme des phases d'avancement du canyon vers la côte. Plusieurs incisions sont visibles dans la structure interne du canyon et témoignent que la morphologie actuelle du canyon est le résultat de son évolution polyphasée. L'instabilité de la zone du canyon est en relation avec les apports sédimentaires importants à l'embouchure du Danube, avec la présence du gaz dans les sédiments superficiels, et possiblement sous un contrôle structural. Sur la pente supérieure (entre le canyon du Danube et environ 1400 m de profondeur) le chenal du Danube présente des levées bien développées et fortement asymétriques, avec la levée droite plus haute et plus large que la levée gauche. Ce type d'asymétrie, fréquemment décrit dans les éventails profonds est généralement attribué à l'effet Coriolis (Menard, 1955). Le chenal est légèrement sinueux, partiellement comblé et incisé par un talweg axial qui représente la continuation sur la pente du talweg incisé dans le canyon du Danube. L'analyse sismique détaillée du remplissage de la vallée montre plusieurs phases de dépôt, séparées par des discontinuités érosives. Ces surfaces d'érosion correspondent à des terrasses emboîtées, relativement parallèles le long de la vallée, visibles dans la bathymétrie. Les dépôts qui constituent le remplissage du chenal présentent un faciès sismique de type HAR (High Amplitude Reflections) dans l'axe du chenal, partiellement (ou parfois totalement) enlevé par les phases d'érosion subséquentes, qui continue latéralement avec des réflexions litées correspondant à un faciès sédimentaire de levée. Le remplissage de la vallée a été donc associé avec des écoulements dans le chenal, et non pas avec l'interruption de son fonctionnement. Sur la pente inférieure, le chenal unique bifurque plusieurs fois par avulsion et forme de nouveaux systèmes chenaux-levées méandriformes. Ces systèmes se succèdent verticalement en onlap, ce qui montre qu'un seul chenal a été actif à la fois. Chaque phase d'avulsion a eu comme résultat la mise en place d'une unité constituée par un lobe défini comme "High Amplitude Reflection Packets" (HARP, Flood et al., 1991) à la base, et un système chenal-levée au sommet. Le dépôt d'un lobe HARP est associé avec de l'érosion dans le chenal en amont du point d'avulsion pour l'ajustement de son profil après la rupture de la levée. Quand le chenal a retrouvé son profil d'équilibre, l'érosion a cessé et des levées ont commencé à se développer au-dessus des HARPs (Pirmez et al., 1997). Toutes les phases d'avulsion se sont développées d'après le même modèle: (1) la rupture de la levée gauche, plus étroite; (2) le dépôt d'un lobe HARP par les écoulements non-chenalisés en aval du point d'avulsion, et l'abandon de l'ancien chenal; (3) l'initiation d'un nouveau système chenal-levée. La migration systématique du chenal vers le nord est influencée par l'assymétrie des levées (donc par la force de Coriolis), et confinée entre les grandes levées de la phase initiale du chenal du Danube, au sud, et le relief abrupt de l'éventail du Dniepr au nord. La structure sédimentaire du chenal du Danube indique que les surfaces érosives à l'intérieur du remplissage du chenal se seraient formées en réponse aux avulsions, du fait de l'ajustement du profil du chenal après la rupture d'une levée. Les sédiments du chenal érodés au cours de ce processus ont formé les lobes HARP. Quand le chenal a retrouvé son profil d'équilibre, un système chenal-levée s'est développé en aval du point d'avulsion au dessus du lobe HARP, mais aussi en amont de ce point, où il se trouve confiné dans la vallée érosive. Les incisions fluviatiles identifiés sur la plate-forme continentale et la position de la ligne de côte pendant la dernière période d'activité du chenal du Danube montrent que le paléo-Danube se dirigeait directement vers la tête du canyon du Danube. Son embouchure était située à proximité du canyon, qui alimentait le chenal du Danube. Cependant, les courants hyperpycnaux devaient prévaloir dans le milieu de salinité réduite qui caractérisait la mer Noire lors des périodes actives de l'éventail. Ces conditions auraient favorisé la mise en place d'un système quasi-continu fleuve-canyon-éventail profond, qui contrôlait le transfert des sédiments entre la côte et le bassin profond.

Droits : info:eu-repo/semantics/openAccess
http://archimer.ifremer.fr/doc/2002/these-1206.pdf
http://archimer.ifremer.fr/doc/00000/1206/

Éditeur(s) : HAL CCSD
Résumé : Séminaire de Synthèse du Projet FPPSM "Forêts, Parcs, Pauvreté au Sud de Madagascar"
A Madagascar, la déforestation mobilise toutes les recherches, mais il manque encore une base de données complète, référencée et réactualisable sur les dynamiques forestières. Une solution est la valorisation d'images satellitaires multidates qui, de ce fait, sont issues de capteurs différents en termes de résolution spatiale, radiométrique et temporelle (Spot, Landsat, Modis). Ces données géolocalisées sont volumineuses, elles doivent être normalisées puis stockées et finalement traitées. Face à l'hétérogénéité des données et traitements, l'interopérabilité des ressources est assurée par le standard ISO (International Standard Organisation) et la spécification OGC (Open Geospatial Consortium). Le traitement de séries chronologiques de la couverture forestière exige un outil réutilisable qui s'adapte à de nouvelles données satellitaires : des chaînes de traitement pour les données simples, des workflows pour les gros volumes de données. La modélisation du workflow est illustrée par la construction de sa base de connaissance en utilisant un contexte de travail.
https://hal.archives-ouvertes.fr/hal-01370017

hal-01370017
https://hal.archives-ouvertes.fr/hal-01370017
IRD : fdi:010066424