Éditeur(s) : HAL CCSD Springer Verlag
Résumé : International audience
In ophiolites and in present-day oceanic crust formed at fast spreading ridges, oceanic plagiogranites are commonly observed at, or close to the base of the sheeted dike complex. They can be produced either by differentiation of mafic melts, or by hydrous partial melting of the hydrothermally altered sheeted dikes. In addition, the hydrothermally altered base of the sheeted dike complex, which is often infiltrated by plagiogranitic veins, is usually recrystallized into granoblastic dikes that are commonly interpreted as a result of prograde granulitic metamorphism. To test the anatectic origin of oceanic plagiogranites, we performed melting experiments on a natural hydrothermally altered dike, under conditions that match those prevailing at the base of the sheeted dike complex. All generated melts are water saturated, transitional between tholeiitic and calc-alkaline, and match the compositions of oceanic plagiogranites observed close to the base of the sheeted dike complex. Newly crystallized clinopyroxene and plagioclase have compositions that are characteristic of the same minerals in granoblastic dikes. Published silicic melt compositions obtained in classical MORB fractionation experiments also broadly match the compositions of oceanic plagiogranites; however, the compositions of the coexisting experimental minerals significantly deviate from those of the granoblastic dikes. Our results demonstrate that hydrous partial melting is a likely common process in the root zone of the sheeted dike complex, starting at temperatures exceeding 850A degrees C. The newly formed melt can either crystallize to form oceanic plagiogranites or may be recycled within the melt lens resulting in hybridized and contaminated MORB melts. It represents the main MORB crustal contamination process. The residue after the partial melting event is represented by the granoblastic dikes. Our results support a model with a dynamic melt lens that has the potential to trigger hydrous partial melting reactions in the previously hydrothermally altered sheeted dikes. A new thermometer using the Al content of clinopyroxene is also elaborated.
ISSN: 0010-7999

hal-00534058
https://hal.archives-ouvertes.fr/hal-00534058
DOI : 10.1007/s00410-010-0502-6

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Marine Protected Areas (MPAs), if well designed and managed, can produce conservation benefits to fish assemblages within no-take zones and fishery benefits in neighboring areas through ‘spillover’. However, although plenty of studies have provided evidence of the benefits produced within MPA boundaries, overall benefits to local fisheries, especially via spillover, seem to be still unclear. Because of the lost fishing grounds following an MPA establishment, local fishermen usually oppose MPAs. There is, therefore, the urgent need for a better understanding of the mechanism(s) through which MPAs can export fishable fish biomass towards adjacent fished areas, a process that could counterbalance the loss of fishing grounds. Here we review the literature on spillover for refining the terminology, detailing the underlying mechanisms and identifying both the existing and needed methodological approaches to measure spillover. Operationally, two types of spillover should be considered: ecological spillover (i.e. the net export of juvenile, subadult and adult biomass from MPAs outwards driven by density-dependent processes) and the fishery spillover (i.e. the proportion of this biomass that can be fished, taking into account regulations and accessibility). Underwater visual census and tagging/tracking may allow getting evidence of ecological spillover, while experimental catch data are essential to assess and monitor fishery spillover, which is the main component of MPAs that can provide direct benefit to local fisheries.
ISSN: 1617-1381

hal-01325478
https://hal-univ-perp.archives-ouvertes.fr/hal-01325478
DOI : 10.1016/j.jnc.2016.04.004

Éditeur(s) : Amer Meteorological Soc
Résumé : The Lagrangian Transport Experiment (LATEX) was developed to study the influence of coupled physical and biogeochemical dynamics at the meso- and submesoscales on the transfers of matter and heat between the coastal zone and the open ocean. One of the goals of the Latex10 field experiment, conducted during September 2010 in the Gulf of Lion (northwest Mediterranean), was to mark a dynamical mesoscale feature by releasing a passive tracer [sulfur hexafluoride (SF6)] together with an array of Lagrangian buoys. The goal was to release the tracer in an initial patch as homogeneous as possible in the horizontal, and to study its turbulent mixing and dispersion while minimizing the contribution due to advection. For that, it was necessary to continuously adjust the vessel route in order to remain as closely as possible in the Lagrangian reference frame moving with the investigated mesoscale structure. To accomplish this task, a methodology and software were developed, which are presented here. The software is equipped with a series of graphical and user-friendly accessories and the entire package for MATLAB can be freely downloaded ().
Journal Of Atmospheric And Oceanic Technology (0739-0572) (Amer Meteorological Soc), 2013-08 , Vol. 30 , N. 8 , P. 1940-1950

Droits : 2013 American Meteorological Society
http://archimer.ifremer.fr/doc/00155/26590/24719.pdf
DOI:10.1175/JTECH-D-12-00183.1
http://archimer.ifremer.fr/doc/00155/26590/

Éditeur(s) : HAL CCSD
Résumé : International audience
Understand the dynamics of the fresh-salt water interface in aquifers is a key issue to comprehend mixing processand to quantity the discharge of nutrients in to coastal areas. In order to go beyond the current knowledge inthis issue an experimental site has been set up at the alluvial aquifer Riera Argentona (Barcelona – Spain). Thesite comprises 16 shallow piezometers installed between 30 and 90 m from the seashore, with depths rangingbetween 15 and 25 meters. The seawater interface is being monitored using several techniques, the combinationof which will help us to understand the spatial and temporal behaviour of the mixing zone and the geochemicalprocesses occurring there. Specially the deepest piezometers are equipped with electrodes in order to performcross-hole electrical resistivity tomography (CHERT). In addition, all piezometers are also equipped with FiberOptic cable to perform distributed temperature measurements. Two single steel armoured fibre optic cable lines ofaround 600m length were installed in all boreholes. The objective is to use the cable both as passive and activetemperature sensor. The first is being done for the continuous monitoring of temperature whereas; the secondprovides a higher temperature resolution used to monitor field experiments.Periodic CHERT measurements are carried out between the piezometer equipped with electrodes, resultingin parallel and perpendicular vertical cross sections of the site resistivity. The position of the fresh-salt waterinterface can be identified due to the resistivity contrast between the saline and fresh water. Preliminary resultsof periodic distributed temperature measurements will be also be used to monitor the position of the mixing zonethanks to the contrast and seasonal temperature changes. Periodic down-hole EC profiles will be used to validatethe method.AcknowledgementsThis work was funded by the projects CGL2013-48869-C2-1 y CGL2013-48869-C2-2-R of the Spanish Government.We would like to thank SIMMAR (Serveis Integrals de Manteniment del Maresme) and the ConsellComarcal del Maresme in the construction of the research site
European Geosciences Union General Assembly 2016
Vienne, Austria

insu-01308757
https://hal-insu.archives-ouvertes.fr/insu-01308757

Éditeur(s) : HAL CCSD Elsevier
Résumé : Nominally anhydrous minerals (NAMs) of Earth's mantle can contain hydrogen as atomic impurity in their crystal structures. This hydrogen substantially modifies many physical properties of Earth's mantle rocks. Also, the Earth's deep interior is made of rocks where minerals are separated by nanometer-scale interfaces call grain boundaries and interphase boundaries. These grain boundaries should carefully be considered as a potential hydrogen reservoir as well. I report here an experimental investigation of hydrogen diffusion through grain boundaries in olivine polycrystalline aggregates. Hot-press and diffusion experiments were performed using a gas-medium high-pressure vessel at a confining pressure of 300 MPa, over a temperature range of 1000-1200 degrees C. The diffusion assembly consisted of a dense polycrystalline cylinder of natural olivine from San Carlos (Arizona) mixed with olivine singles crystals of millimeter size. This mixture was couple with a talc cylinder. Ni capsule were used to buffer the oxygen fugacity at Ni-NiO level. Experiment durations varied from 3 min to 4 h. The presence of hydrogen in the sample was quantified using Fourier transform infrared spectroscopy. The calculation of the diffusion coefficients was based on the estimation of the length of polycrystalline solid affected by the diffusion of hydrogen. The absence or presence of hydrogen was recorded by the large olivines behaving here as "hydrogen sensor", which are implanted in the aggregate. The results indicate that effective hydrogen diffusivity which includes grain boundaries effect in olivine aggregate is barely one order of magnitude faster than hydrogen diffusion in an olivine single crystal with a diffusivity similar to 8.5x 10(-10) m(2) s(-1) 1000 degrees C and only twice faster similar to 2.1 x10(-9) m(2) s(-1) 1200 degrees C. Calculations of the diffusion data in relation to the Arrhenius Law, yield an activation energy of similar to 70 +/- 10 kJ mol(-l) . From these effective diffusivities and combined with published diffusion data for olivine single crystals, hydrogen diffusion in grain boundaries is extracted and yield diffusivities almost three order of magnitude faster (similar to 5 x 10(-6) m(2) s(-1) at 1200 degrees C) than in an olivine single crystal at the equivalent high temperature. On geological scales and for coarse-grain rocks, hydrogen diffusivity in grain boundaries is not fast enough to compete with lattice diffusion. The relative large grain size of mantle rocks will ensure a very limited hydrogen transport by effective diffusion, and a good conservation of water-rich zones in the Earth's mantle.
ISSN: 0012-821X

hal-00512821
https://hal.archives-ouvertes.fr/hal-00512821
DOI : 10.1016/j.epsl.2010.04.019

Éditeur(s) : HAL CCSD Elsevier
Résumé : Carbon emission at volcanic centers requires a constant balance between output (mostly by volcanism, either at plate boundaries or intraplate) and input (mostly at trench settings) of carbon from and to the Earth's mantle. The form of carbon that resides in the mantle is controlled by depth (pressure) and oxygen fugacity, the latter in turn depending on the depth and the concentration of iron in the mantle. In the shallow, lithospheric mantle, carbon is likely to be present in the oxidized form of CO2 (except under cratons where carbon is reduced to graphite or diamond). Below approximately 90 km, in the asthenosphere, the oxidized form of carbon is carbonate, either mineral or melt, depending on the thermal regime. At depths greater than approximately 150 km, the asthenospheric mantle is too reducing for carbon to stay in its oxidized form and only diamond is present, unless there is sufficient hydrogen to form reduced C–H fluids. Hence, the region located in the depth range of 90 to 150 km deep is where carbonatitic melts can most likely be produced and impregnate the surrounding mantle through metasomatism. The upper bound of this region is called the carbonate ledge. This limit prevents carbonate (either solid or molten) from ascending because of degassing and CO2 liberation. The lower bound is a redox front where redox melting (that is, melting caused by oxidation) may take place in an ascending portion of carbon-containing mantle. Carbonatite eruptions and presence of carbonate mineral inclusions in deep-seated diamonds provide evidence that these boundaries can be trespassed in some cases.An analysis of the experimental data that has bearing on silicate melting in the presence of carbon further shows that the carbonate ledge is a melting curve with a negative or flat Clapeyron (dP/dT) slope. In the carbonated ultrabasic (peridotite) systems, the carbonate ledge is located between ~ 2–3 GPa. The ledge divides the pressure–temperature space into a region of low-pressure silicate melt production, and a high-pressure region where carbonatites can be produced. Carbonatitic melts in equilibrium with mantle peridotite have compositions close to dolomitic (approximately equal amounts of Ca and Mg) with a general trend of becoming markedly more magnesian with increasing pressure. Calcic carbonatites may be stable at pressures < 2 GPa if clinopyroxene is absent. At mantle transition zone pressure range, there seems to be a melting temperature decrease (negative fusion slope), which may be caused by the stabilization of majoritic garnet.The carbonated basic (broadly eclogitic) system is more complex than the peridotitic one, because of the strong control of bulk silicate composition on melting temperatures, and hence, on melt composition. In carbonated eclogite systems, we propose that the effect of bulk composition upon all observed features can perhaps be related to silica super-saturation, or lack thereof. In some cases, high calcium (> 80 mol% CaCO3) melts can be produced, making the melting of carbonated eclogites an appealing scenario for the genesis of calcio-carbonatites in the Earth's mantle. Comparison with modeled pressure–temperature paths of subducted oceanic lithosphere shows that fusion of carbonated eclogite at depths shallower than 200 km should be expected for hot (Cascadian-type) subduction thermal regimes. On the other hand, in the case of cooler thermal regimes (Honshu-type, for instance), subducted carbonates may be stable to greater depths in Earth at trench settings, depending on the bulk composition of the system.Furthermore, high-pressure experiments show evidence of a continuum among carbonatitic, kimberlitic, melilititic, and basaltic liquids, for increasing melting degree of carbonated peridotite. This continuum has not been documented in the case of fusion of carbonated eclogite. It may be present, however, when certain sediments are fused, although the silicate melts are granitic to rhyodacitic instead of being kimberlitic in composition. Additional high-pressure work on phase relations in the simple binary system CaCO3–MgCO3 and specific focus on oxide solubility in the vapor phase have the potential to further clarify phase relations on complex silicate–carbonate systems at mantle conditions.
ISSN: 0009-2541

hal-01277770
https://hal.archives-ouvertes.fr/hal-01277770
DOI : 10.1016/j.chemgeo.2015.05.018

Éditeur(s) : HAL CCSD Royal Society, The
Résumé : International audience
A 30-year study of temporal changes in gastropod community structure on the reefs of a Pacific Ocean atoll (Fangataufa, Tuamotu Archipelago) subjected to atmospheric nuclear tests during the 1960s offered the opportunity for an otherwise impossible field experiment that could help ecologists understand mollusc primary succession. Reef molluscs were partly or entirely wiped out by the heat of the nuclear tests and the reefs were recolonized by ocean larvae. On all reefs, community composition before the tests was very different from what it evolved to afterwards. A new method of analysis was developed to study the temporal variation in community composition before versus after the tests (temporal beta diversity). Analyses showed that community compositions diverged through time among the reefs. Only some species can survive the harsh conditions of supralittoral zones, so the same species recolonized them; environmental filtering controlled the development of the new communities. In the reef flat and edge zones, differences in community composition seem to be the result of neutral stochastic colonization by larvae coming from the open ocean. All reefs developed a community composition quite different from that before the nuclear tests.
ISSN: 0962-8452

hal-01174175
https://hal-univ-perp.archives-ouvertes.fr/hal-01174175
DOI : 10.1098/rspb.2015.0750

Éditeur(s) : HAL CCSD
Résumé :   Diplôme : DEA
il s'agit d'un type de produit dont les métadonnées ne correspondent pas aux métadonnées attendues dans les autres types de produit : DISSERTATION
As part of a programme of degraded soils rehabilitation, and in order to follow the biological processes connected with the soils reconstitution, it is a requisite to determine indicators able to account for the evolution of the soil. These indicators can he found on structural and/or functional characteristics of the bacterial communities, such as soil respiration, denitrification or genetic diversity. Theses descriptors are able to characterize the global community or targeted communities chosen for their importance in the ecosystem functioning. In this work, we tried to know whether soil bacteria genetic diversity was able to be a relevant indicator of the soil evolution in a rehabilitated sequence. This diversity is apprehended via a molecular technique: ARISA. A chronosequence situated on a gold mine, already experimented as part of a programme of degraded zones rehabilitation, was at our disposal. Results show that ARISA is a very sensitive technique, able to account for the bacterial community heterogeneity in a soil but unable, at the parcel scale, to discriminate the treatments nor to account for the evolution in lime of planted treatments. Lastly, the advantage of this indicator of genetic diversity may arise from its confrontation to other indicators (functional, for example).
Dans le cadre de la revégétalisation d'un sol dégradé et afin de pouvoir suivre les processus biologiques liés à la reconstitution des sols, il est nécessaire de déterminer des indicateurs pouvant rendre compte de l'évolution de l'état du sol. Ces indicateurs peuvent être fondés sur des caractéristiques fonctionnelles et/ou structurales des communautés bactériennes telles que la respiration, la dénitrification ou la diversité génétique. Ces descripteurs peuvent analyser la communauté globale ou des communautés cibles choisies pour leur importance dans le fonctionnement de l'écosystème. L'objectif de ce stage était de savoir si la diversité génétique des bactéries du sol pouvait être un indicateur de l'évolution des sols au sein d'une séquence de revégétalisation. Cette diversité est appréhendée par une technique de biologie moléculaire : l'ARISA. On dispose d'une chronoséquence située sur une mine d'or étudiée dans le cadre d'un programme de réhabilitation des zones dégradées. Les résultats montrent que l'ARISA est une technique très sensible, qui rend bien compte de l’hétérogénéité des communautés bactériennes présentes dans un sol mais est incapable, à l’échelle de la parcelle, de discriminer ni les traitements ni de rendre compte de l'évolution dans le temps de ces parcelles. Enfin, l'intérêt de cet indicateur de diversité génétique pourra résulter de sa confrontation avec d'autres indicateurs (fonctionnels par exemple).
https://hal.archives-ouvertes.fr/hal-01189155

hal-01189155
https://hal.archives-ouvertes.fr/hal-01189155
PRODINRA : 9464

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The Maguelone shore extends along the northern coast of the Gulf of Lions, west of the Rhone Delta and east of high-gradient coastal streams that have provided most of the clastic sediments to the Gulf of Lions margin since the early Miocene. This 10 km-wide area is constituted by a small coastal watershed (15 km long) in low-lying carbonate hills, a kilometre-wide marsh, a sandy beach barrier and a shoreface experiencing local low sedimentation rates. This onshore-offshore transition zone is a key area to understand the relationships between erosion, by-pass, deposition and preservation processes. Unlike the neighbouring Rhone deposits that display numerous thick deltaic sequences related to a continuous sediment flux, the Maguelone shore exhibits peculiar sedimentary bodies. The analysis of about 250 km of new VHR seismic profiles acquired over the study area, 9 short cores and outcrops data allowed us to determine the three-dimensional high-resolution geometry of the coastal system tracts from Quaternary to present-day. This revealed dominant denudation processes in the Upstream catchments associated with the formation of incised valleys during Quaternary lowstands. In addition, this study investigates the erosion and deposition mechanisms controlled by littoral hydrodynamics that have been taken place on this shore since the last transgression. In particular, metre-high and hundreds of metre-long sandy bodies constructed by alongshore hydrodynamics were identified and their effect on the morphodynamics of the whole littoral system is discussed. The Maguelone shore can be used as an experimental study for onshore/offshore dynamics under the influence of microtidal wave/current hydrodynamics and very low river-derived sediment flux during a eustatic cycle. Geometry of system tracts across flood plain to shoreface is usually considered to be controlled by relative sea-level changes, and is successfully analysed with 2D sequence stratigraphy cross-shore models. It is observed that in areas like the Maguelone shore, traditional sequence stratigraphy methods might not be fully relevant and need to integrate alongshore hydrodynamical processes.
ISSN: 0025-3227

hal-00421060
https://hal.archives-ouvertes.fr/hal-00421060
DOI : 10.1016/j.margeo.2009.06.008

Éditeur(s) : Public Library Science
Résumé : The blue mussel, Mytilus edulis, is a commercially important species, with production based on both fisheries and aquaculture. Dynamic Energy Budget (DEB) models have been extensively applied to study its energetics but such applications require a deep understanding of its nutrition, from filtration to assimilation. Being filter feeders, mussels show multiple responses to temporal fluctuations in their food and environment, raising questions that can be investigated by modeling. To provide a better insight into mussel–environment interactions, an experiment was conducted in one of the main French growing zones (Utah Beach, Normandy). Mussel growth was monitored monthly for 18 months, with a large number of environmental descriptors measured in parallel. Food proxies such as chlorophyll a, particulate organic carbon and phytoplankton were also sampled, in addition to non-nutritious particles. High-frequency physical data recording (e.g., water temperature, immersion duration) completed the habitat description. Measures revealed an increase in dry flesh mass during the first year, followed by a high mass loss, which could not be completely explained by the DEB model using raw external signals. We propose two methods that reconstruct food from shell length and dry flesh mass variations. The former depends on the inversion of the growth equation while the latter is based on iterative simulations. Assemblages of food proxies are then related to reconstructed food input, with a special focus on plankton species. A characteristic contribution is attributed to these sources to estimate nutritional values for mussels. M. edulis shows no preference between most plankton life history traits. Selection is based on the size of the ingested particles, which is modified by the volume and social behavior of plankton species. This finding reveals the importance of diet diversity and both passive and active selections, and confirms the need to adjust DEB models to different populations and sites.
Plos One (1932-6203) (Public Library Science), 2014-10 , Vol. 9 , N. 10 , P. 1-13

Droits : 2014 Picoche et al. This is an open-access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited
http://archimer.ifremer.fr/doc/00218/32895/31380.pdf
http://archimer.ifremer.fr/doc/00218/32895/31381.pdf
http://archimer.ifremer.fr/doc/00218/32895/31382.pdf
http://archimer.ifremer.fr/doc/00218/32895/31383.pdf
http://archimer.ifremer.fr/doc/00218/32895/31384.pdf

Éditeur(s) : HAL CCSD Cambridge University Press
Résumé : Identify specific aspects of mixed farming systems. At the same time, certain practices seem to transcend the whole territory and relate little to the activities that dominate a zone. To be able to organize a follow-up of these promising complex systems at farmer and experimental level situation a first evolutionary assessment grid was sketched to enable the selection of the situations. This should allow a more detailed study of the functionality of farms where estimates can be made on the the performances and robustness of systems in terms ofsustainable development.
ISSN: 2040-4700

hal-01601271
https://hal.archives-ouvertes.fr/hal-01601271
DOI : 10.1017/S2040470010001305
PRODINRA : 383226

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Large sand intrusions often exhibit conical morphologies analogous to magmatic intrusions such as saucer-shaped or cup-shaped sills. Whereas some physical processes may be similar, we show with scaled experiments that the formation of conical sand intrusions may be favoured by the pore-pressure gradients prevailing in the host rock before sand injection. Our experiments involve injecting air into a permeable and cohesive analogue material to produce hydraulic fractures while controlling the pore pressure field. We control the state of overpressure in the overburden by applying homogeneous basal pore pressure, and then adding a second local pore pressure field by injecting air via a central injector to initiate hydraulic fractures near the injection point. In experiments involving small vertical effective stresses (small overburden, or high pore fluid overpressure), the fracturing pressure (lambda(fract)) is supralithostatic and two dipping fractures are initiated at the injection point forming a conical structure. From theoretical considerations, we predict that high values of lambda(fract), are due to strong cohesion or high pore fluid overpressure distributed in the overburden. Such conditions are favoured by the pore pressure/stress coupling induced by both pore pressure fields. The dips of cones can be accounted for elastic-stress rotation occurring around the source. Contrary to magmatic chamber models, the aqueous fluid overpressure developed in a parent sandbody (and prevailing before the formation of injectites) may diffuse into the surrounding overburden, thus favouring stress rotation and the formation of inclined sheets far from the parent source. For experiments involving higher vertical effective stresses (thick overburden or low pore fluid overpressure), the fracturing pressure is lower than the lithostatic stress, and a single fracture is opened in mode I which then grows vertically. At a critical depth, the fracture separates into two dilatant branches forming a flat cone. We make use of a P.I.V. (Particle Imaging Velocimetiy) technique to analyse plastic deformation, showing that these inclined fractures are opened in mixed modes. Close to the surface, they change into steep shear bands where fluids can infiltrate. The final morphology of the fracture network is very similar to the common tripartite architecture of various injection complexes, indicating that different mechanisms may be involved in the formation of dykes. Feeder dykes under the sill zones may open as tensile fractures, while overlying dykes may be guided by the deformation induced by the growth of sills. These deformation conditions may also favour the formation of fluid escape structures and pockmarks. (C) 2011 Elsevier B.V. All rights reserved.
ISSN: 0012-821X

hal-00745640
https://hal.archives-ouvertes.fr/hal-00745640
DOI : 10.1016/j.epsl.2011.10.029

Résumé : Le pâturage, principal mode d’alimentation en zone tropicale, est souvent dévalorisé car il est associé à des performances animales jugées insuffisantes, et peut avoir des effets néfastes sur l’environnement. Même si l’alimentation à l’auge permet de meilleures productions, ce mode de conduite présente également des inconvénients, en termes d’investissements, de rentabilité économique, d’impact des rejets sur l’environnement et de qualité des produits. Une intensification de la conduite au pâturage semble donc une voie d’avenir, mais nécessite une meilleure connaissance de ce mode de conduite et de ses conséquences sur l’alimentation et les performances des animaux. Il apparait également nécessaire de comparer l’élevage au pâturage et à l’auge sur des critères homogènes, en dissociant les composantes de ces modes de conduite.L’objectif de la thèse est d’évaluer et de comparer la conduite au pâturage et la conduite hors sol, en tenant compte également de la distribution ou non de concentré, sur l’alimentation, la croissance, les caractéristiques d’abattage et la consommation d’eau. Dans un premier temps, nous avons étudié au cours d’une expérimentation, les effets de ces deux modes de conduite sur la croissance, les caractéristiques d’abattage et de carcasse de taurillons Créoles abattus à deux âges (précoce vs tardif). Les taurillons à l’auge avaient une croissance plus rapide, des poids de carcasse plus élevés, ainsi que des carcasses plus grasses. Nous avons observé qu’abattre plus tardivement au pâturage (17 et 21 mois vs 14 et 17 mois à l’auge), permettait d’atteindre des poids finaux similaires à ceux obtenus à l’auge et des carcasses de meilleure qualité, plus riche en muscle. Nous avons expliqué la majorité de nos résultats par les effets combinés des modes de conduite et de l’alimentation et avons voulu étudier leurs effets respectifs. Dans un second temps, l’étude des effets du mode de conduite a été faite dans un premier temps, par le biais d’une méta-analyse. Les performances des animaux à l’auge étaient meilleures qu’au pâturage, mais ces effets dépendaient de la stratégie de complémentation. De cette méta-analyse est également apparu le manque d’études auge vs pâturage sur l’alimentation et à ration égale. Afin d’étudier les effets respectifs du mode de conduite et de la stratégie de complémentation, un dispositif analytique avec des taurillons élevés à l’auge et au pâturage complémentés ou non avec du concentré a été mis en place. Dans un premier temps, une étude méthodologique menée grâce à ce dispositif nous a permis d’identifier que la SPIR permettait la meilleure estimation de la dMO, l’OMI et la MODI au pâturage. Les résultats de l’étude analytique ont montré que les animaux au pâturage utilisaient mieux leur alimentation pour leur croît que ceux à l’auge et la stratégie de complémentation influençait davantage ces variables que le mode de conduite. Avec une stratégie de complémentation appropriée, les animaux au pâturage peuvent atteindre des performances similaires à celles obtenues à l’auge.
Grazing, main way of feeding ruminants in the tropics, is often undervalued because it is associated with animal performance deemed insufficient, and may have adverse effects on the environment. Even if stall feeding allows better production, this way of feeding has drawbacks in terms of investment, profitability, impact of emissions on the environment and product quality. Intensification of grazing seems a way forward, but requires a better understanding of this way of feeding and its impact on feeding and animal performance. It also appears necessary to compare grazing and stalls feeding on homogeneous criteria, separating the components of these modes of management.The aim of the thesis is to evaluate and compare stalls and pasture feeding environment, taking into account also the distribution or not of concentrate on feeding, growth, slaughter characteristics and water consumption. At first , we studied in an experiment , the effects of these two feeding systems on growth, slaughter and carcass characteristics of Creoles bulls slaughtered at two ages (early vs. late ). Bulls fed in trough grew faster, had greater carcass weight and fatter carcasses. We observed that a later slaughter of grazing animals (17 and 21 months vs. 14 and 17 months in stalls), allowed to reach final weights similar to those obtained in stalls and carcasses richer in muscle. We explained most of our results by the combined effects of feeding environment and complementation strategy and wanted to study their effects. In a second step, the study of the effects of feeding environment was made in first instance, through a meta-analysis. Stalls fed animals had greater performances than pasture fed ones, but these effects depended on complementation strategy. This meta-analysis also highlighted the lack of knowledge on intake and digestibility at pasture, which is a limitation on attempts to compare with measurements carried out in trough-fed animals. To investigate the relative effects of feeding environment and complementation strategy, we conceived an analytical trial with Creole bulls reared in stalls and at pasture, supplemented or not with concentrate. First of all, this analytical trial was the support of a methodological study, which identified that the NIRS method allows the best estimate of the OMD, OMI and DOMI at pasture. The analytical trial showed that grazing animals had better feed efficiency feed for their growth than stall fed ones and complementation strategy influenced more these variables than feeding environment. With an appropriate strategy for complementation, grazing animals can achieve similar performance to those obtained at the trough.

http://www.theses.fr/2013AGUY0675/document

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
The anisotropic single crystal seismic properties are reviewed in the light of recent experimental and theoretical determinations. Although considerable progress has been made on the determination of single crystal properties, data are still lacking, particularly for the temperature derivatives of transition zone and lower mantle phases. The common types of LPO of olivine, opx and cpx are presented together with their associated seismic properties. It is emphasized that simple seismic symmetry pattern of upper mantle rocks are a direct result of the interaction of olivine, opx and cpx. Using the standard structural frame (X lineation, Z pole to foliation) for typical LPOs of olivine, opx and cpx have the maximum Vp parallel to X, in the XZ plane and parallel to Y respectively. Destructive interference occurs between these minerals and hence P-wave anisotropy should be sensitive to the aggregate composition. For shear wave splitting (dVs) typical olivine and opx LPOs result in similar patterns with the maximum dVs in the YZ plane and the fast split shear wave (Vs1) polarized parallel to the foliation. A typical cpx LPO on the other hand produces destructive interference as the max dVs is close to X. By comparison with experiments and numerical simulations, it is estimated that upper mantle samples have an olivine LPO strength which recorded shear strain gamma of between 0.25 and 2.0. Pyrolite and piclogite models are compared with global transverse isotropic models. The slowly reducing P-wave anisotropy in the first 200 km can be explained by a model with constant composition and LPO strength. The sharp decrease in the observed anisotropy in the global models cannot be explained by the transformation of opx to cpx at 300 km, it is proposed that this decrease is due to a reduction in LPO strength from 200 to 350 km at the base of the lithosphere.
Earth's Deep Interior: Mineral Physics and Tomography From the Atomic Scale to the Global Scale

ISBN : 9780875909752
hal-01391524
http://hal.univ-reunion.fr/hal-01391524
http://hal.univ-reunion.fr/hal-01391524/document
http://hal.univ-reunion.fr/hal-01391524/file/Mainprice_AGUmonog_DM_GB_WBI_2000.pdf