Résumé : Pour beaucoup de cultures, un sol non travaillé est une alternative de plus en plus crédible au travail intensif du sol, en particulier pour des raisons environnementales. Mais l’ananas (ananas comosus) présente un enracinement fragile très sensible à la structure, ce qui motive souvent un travail important du sol avant plantation. L’alternative d’une plantation sans travail du sol ne va donc pas de soi. L’objet de cette thèse est de répondre à la question de la faisabilité d’une culture d’ananas sans travail du sol, en remplaçant ce dernier par une plante de service « décompactante » dont les traits racinaires seraient favorables à la (re)structuration d’un sol compact. Le travail de cette thèse a donc porté sur l’évaluation de plusieurs espèces candidates, puis sur l’étude, au champ, des effets sur le sol de la plus prometteuse (Stylosanthes guianensis ). Enfin, dans le cadre d’un essai au champ comparant un système de culture innovant ananas sans travail du sol, on a étudié l’effet de la plante de service sur le fonctionnement de la culture de l’ananas. Dans un premier essai, c’est le Stylosanthes guianensis qui, comparé à huit autres espèces (Arachis pintoï, Brachiaria decumbens, Cajanus cajan, Crotalaria juncea, Cynodon dactylon, Eleusine coracana, Pueraria phaseoloides, et le maïs), a montré les traits racinaires les plus favorables à la structuration d’un sol compact. Les valeurs supérieures du diamètre racinaire moyen et de la densité de longueur racinaire (DRL) caractérisent les principaux traits impliqués. Dans un deuxième essai, les mesures de conductivité hydraulique, d’indice des vides du sol et d’analyse d’images de blocs de sol imprégné sur la répartition surfacique des différents types de porosité ont montré que la culture du Stylosanthes guianensis avait augmenté l’indice des vides du sol et provoqué l’apparition d’une porosité fissurale de grande taille, contribuant ainsi à l’amélioration de la structure du sol. Enfin, un troisième essai mettant en comparaison (i) un système de culture innovant où la culture d’ananas est implantée sans travail du sol après une culture de S. guianensis restructurante et (ii) un système conventionnel comportant un travail profond du sol (et pas de plante de service) a montré que le rendement en fruit est similaire dans les deux systèmes. Cet essai a permis de vérifier que l’enracinement de l’ananas en condition de sol non travaillé bénéficiait du précédent S. guianensis.
For many crops, direct drilling is a well-tried alternative facing the damaging effects of intensive tillage, mainly for environmental causes. But, pineapple (ananas comosus), presents a fragile rooting system which is very sensitive to soil structure. This leads frequently to intensive soil tillage before planting. Direct drilling is not so evident. The aim of this thesis is to give an answer to the feasibility of a no till system for pineapple cultivation, by using a plant with favorable roots traits for compacted soil (re)structuration. This work consisted in evaluating several candidate species, followed by the study, on the field, of the effects the most promising on soil (Stylosanthes guianensis). Finally, through a field experiment, comparing an innovating no till pineapple cultivation system we studied the use effects of Stylosanthes guianensis on the pineapple crop functioning. In a first experiment, Stylosanthes guianensis compared with eight other species (Arachis pintoï, Brachiaria decumbens, Cajanus cajan, Crotalaria juncea, Cynodon dactylon, Eleusine coracana, Pueraria phaseoloides and corn) showed better roots traits for structuring a compacted soil. Measures of average root diameter and root length density are the main implicated roots traits. In a second experiment, the measures of hydraulic conductivity, of the soil void ratio and the analysis of blocks of resin-impregnated soil on the surface distribution of the different type of porosity, all of this showed that Stylosanthes guianensis had increased the soil void ratio and had caused the creation of large-sized cracked porosity, thus contributing to the improvement of the soil structure. Finally, a third experiment involving a comparison between (i) an innovating cultivation system where pineapple is growing in a no till soil after a structuring crop of S. guianensis and (ii) a conventional system with deep tillage (without structuring crop), showed similar fruit yield. This experiment showed evidence that the rooting of pineapple in no till soil benefited from the previous Stylosanthes.

http://www.theses.fr/2014AGUY0725/document

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
A set of synthetic aggregates, containing mixtures of calcite and muscovite, were compacted with varying uniaxial loads ranging from 20 MPa up to 400 MPa. Their elastic properties have been measured using compressional and shear waves in confining hydrostatic pressures up to 475 MPa. Measured seismic velocities are shown to depend on 1) the ratio of calcite to muscovite, 2) the uniaxial load used during sample manufacturing, and 3) the porosity amount prior to velocity measurements. The matrix framework may also affect the seismic velocities, but this effect is not easily quantifiable. In general, measured seismic velocities decrease with increasing muscovite content and porosity. Elastic properties have been calculated based on texture measurements, which were obtained by neutron diffraction. The calculated velocities are based on the calcite and muscovite single crystal elastic tensors, their orientation distribution functions, and their modal fractions. A large discrepancy is apparent between calculated and measured velocities, where the former always overestimate the actual velocities. Shear waves display less of a difference between calculated and measured values, than do compressional waves, indicating that waves propagating by shearing are less affected by sample porosity and matrix framework. A better agreement between measured and calculated seismic velocities arises when the initial porosity is taken into account, using a differential effective medium model. Seismic anisotropy is evident from both measured and calculated velocities, and is low for samples containing pure calcite, but becomes prominent as the muscovite concentration increases. The intensity of anisotropy further depends on the uniaxial load used during sample compaction and the initial porosity.
ISSN: 0148-0227

hal-00512666
https://hal.archives-ouvertes.fr/hal-00512666
DOI : 10.1029/2009JB006523

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Networks of localized conjugate compactive shear bands with large dihedral angles (corresponding to so-called shear-enhanced compaction bands) were generated in 3-layer plane strain finite-difference models. The central layer has elastic–plastic properties with a small positive internal friction coefficient, negative dilatancy factor, and the hardening modulus reducing during the deformation. The two other layers are elastic. The spatial organization of the networks in the central layer, resulting from the elastic–plastic instability of the 3-layer system, was shown to be dependent on the contrast of the elastic stiffness of the layers and on the friction between them. When the stiffness E of the elastic layers and/or the friction are small, the networks are rather symmetric (the bands of both orientation families are distributed homogeneously within the layer). An increase in E at high friction, results in the clustering of the bands of one orientation along a layer segment which is followed by another segment filled with the bands of the other orientation. Different network types are characterized by different band spacing which is smaller in the clustered networks. The intensity of inelastic deformation and hence of porosity reduction within the bands are also smaller in this case. The obtained band networks are very similar to those in nature where the same variability of the network organization is observed. Available geological and mechanical data confirm the conclusions from the modeling about the origin of this variability.
ISSN: 0040-1951

hal-01116201
https://hal.archives-ouvertes.fr/hal-01116201
DOI : 10.1016/j.tecto.2014.01.021

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
In the Oman ophiolite, the horizon where the melt lens pinched during drifting away from the ocean ridge axis has been identified. Starting in the Root Zone of the Sheeted Dike Complex (RZSDC) located above this horizon, 18 Sections down to the upper gabbros unit have been mapped in great detail, in selected areas of the southern massifs of this ophiolite. They are complemented by 133 sites, located throughout the entire ophiolite, where the transition from the RZSDC to the uppermost foliated gabbros is well exposed. Altogether, half the sites and 11 cross sections display, within a few tens of meters beneath the RZSDC, a magmatic foliation which is parallel to the overlying sheeted dikes. In the other sites and cross sections, the gabbro foliation is either flat-lying or steep but not parallel to the sheeted dikes. Compared to the RZSDC isotropic ophitic gabbros where clinopyroxene is interstitial between plagioclase laths, in the topmost steeply foliated gabbros, clinopyroxene is idiomorphic, becoming rapidly granular and tabular down section by recrystallization and peripheral alteration to hornblende. Moving down from these uppermost gabbros and over one hundred meters, the steep foliation becomes stronger and the poorly recovered top gabbros grade into the recrystallized, granular gabbros of the gabbro unit. These repeated observations indicate to ascribe these gabbros to subsidence of a compacting mush from the floor of the melt lens into the underlying, main magma chamber. The topmost gabbros beneath RZSDC, which were expelled from the melt lens by drifting very soon after settling on the melt lens floor, display in plagioclase a spectacular zoning pointing to a fast cooling. Moving downwards, stronger foliation, increased compaction and recovery-recrystallization are explained by the time spent by the subsiding mush inside the magma chamber increasing by one order of magnitude (similar to 50 to 500 yr) over this vertical distance. This field-based study brings compelling field evidence supporting the former models of subsidence which were based on the assumption that the mush that settled onto the floor of the melt lens is sucked downwards during drifting of the crust away from the ridge axis.
ISSN: 0012-821X

hal-00420903
https://hal.archives-ouvertes.fr/hal-00420903
DOI : 10.1016/j.epsl.2009.04.012

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
From outcrops located in Provence (South-East France), we describe the distribution, the microstructures, and the petrophysical properties of deformation band networks related to both contractional and extensional tectonic events. In contraction, pervasively distributed networks of reverse-sense compactional shear bands are observed in all folded sand units of the foreland, whereas localized networks of clustered reverse-sense shear bands are only observed close to a large-scale thrust. In extensional setting, networks of clustered normal-sense shear bands are generally observed adjacent to map-scale faults (100 m–10 km scale), although some randomly distributed bands are also observed between these faults. Normal-sense cataclastic faults, i.e. zone of deformation bands containing a localized slip-surface, are also observed to be restricted to sand units, suggesting that faults initiated in the sands during extension, but not during contraction. Shear bands and faults show cataclastic microstructures with high-permeability reduction whereas compactional shear bands show crush microbreccia or protocataclastic microstructures with moderate permeability reduction. This basin-scale analysis underlines the major role of tectonic settings (thrust-fault versus normal-fault andersonian-stress regime) and the influence of inherited large-scale faults on the formation/localization of low-permeability shear bands. We also provide a geometrical analysis of the band network properties (spacing, thickness, shear/compaction ratio, degree of cataclasis, petrophysical properties) with respect to the median grain size, porosity and grain sorting of host sand. This analysis suggests that grain size, although less important than stress-state conditions and the presence of large-scale faults, has a non-negligible effect on band network geometry. No correlations are observed between the grain sorting, porosity and band network geometry.
ISSN: 0264-8172

hal-01116421
https://hal.archives-ouvertes.fr/hal-01116421
DOI : 10.1016/j.marpetgeo.2013.12.020

Éditeur(s) : HAL CCSD Cushman Foundation for Foraminiferal Research
Résumé : International audience
This study proposes a new method for fast and inexpensive extraction of a large number of living foraminifera for laboratory cultures. The method is a significant improvement over current extraction methods, which are highly time-consuming. Several treatments were designed to test the method. Sediment bearing foraminifera from Brouage Mudflat (Atlantic coast of France) was washed through a 50-µm sieve and distributed in glass Petri dishes with 20, 40 and 80 specimens of Hydrobia ulvae, a common gastropod from European intertidal mudflats. As a control experiment, one dish was treated similarly but maintained without Hydrobia. After two days, most of the sediment in the Hydrobia treatments was compacted into small cylindrical gastropod feces and the tests of living benthic foraminifera (Ammonia tepida and Haynesina germanica) were clean and easily visible. Additional experiments showed that the foraminifera were not ingested by Hydrobia ulvae, and could be picked quickly and easily.
ISSN: 0096-1191

hal-01248034
https://hal.archives-ouvertes.fr/hal-01248034
https://hal.archives-ouvertes.fr/hal-01248034/document
https://hal.archives-ouvertes.fr/hal-01248034/file/rossignol%20et%20al%202007.pdf
DOI : 10.2113/gsjfr.37.1.8

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
A large sand injectite network is very well exposed in the area of Bevons, Southeast France. The associated sandstone turbiditic channel–fill and the host marls are the Aptian–Albian rocks of the Vocontian Basin. The sand injection network is composed of dykes, sills and sedimentary laccoliths ranging in thickness from mm to pluri–m. The dykes and sills have vertical and horizontal lengths of up to and over 100 m and 1 km, respectively. Outcrop observations show that the architecture and morphology of the sand injectites in the marls is governed by the local stress field during injection, pre–existing faults, the host–rock lithology, compaction, and distance to the potential sand source(s). The main set of dykes is oriented N50–60° perpendicular to the minimum compressive stress σ3 during sand injection. Two other sets of dykes are intruded along pre–existing syn–sedimentary faults oriented N140–150° (set 2) and N90° (set 3) during the Apto–Cenomanian interval. Sills and dykes thin laterally away from their potential sand sources and thin laterally away from them. The vertical thickness variations of the dykes and wings are more complex, as thinning away from the sand sources is often compensated by thickening toward the palaeo–surface. Based on field observations and measurements, we characterized the 3D architecture of the sand injectites and showed that the injectites probably formed due to a forceful injection from an overpressured sand body sealed by low–permeability lithologies.
ISSN: 0191-8141

hal-01243488
https://hal.archives-ouvertes.fr/hal-01243488
DOI : 10.1016/j.jsg.2015.07.001

Éditeur(s) : HAL CCSD
Résumé : International audience
We show that the properties of dense subdifferentiability and of trustworthiness are equivalent for any subdifferential satisfying a small set of natural axioms. The proof relies on a remarkable property of the subdifferential of the inf-convolution of two (non necessarily convex) functions. We also show the equivalence of the dense subdifferentiability property with other basic properties of subdifferentials such as a weak∗ Lipschitz Separation property, a strong Compact Separation property and a Minimal property for the analytic approximate subdifferential of Ioffe.
Serdica. Mathematical Journal

hal-00694603
https://hal.archives-ouvertes.fr/hal-00694603

Éditeur(s) : HAL CCSD
Résumé : Submitted to the Journal of Mathematical Analysis and Applications
International audience
We present new types of regularity for nonlinear generalized functions, based on the notion of regular growth with respect to the regularizing parameter of Colombeau's simplified model. This generalizes the notion of G^{ infty }-regularity introduced by M. Oberguggenberger. A key point is that these regularities can be characterized, for compactly supported generalized functions, by a property of their Fourier transform. This opens the door to microanalysis of singularities of generalized functions, with respect to these regularities. We present a complete study of this topic, including properties of the Fourier transform (exchange and regularity theorems) and relationship with classical theory, via suitable results of embeddings.
J. Math. Anal. Appl.

Droits : info:eu-repo/semantics/OpenAccess
hal-00020280
https://hal.archives-ouvertes.fr/hal-00020280
https://hal.archives-ouvertes.fr/hal-00020280/document
https://hal.archives-ouvertes.fr/hal-00020280/file/ADelcroixGRegularJan27.pdf
ARXIV : math/0603183

Éditeur(s) : HAL CCSD Elsevier
Résumé : Remerciements :- Dr. Jacques Delabie- Andrea Yockey-Dejean- Geoff Brown- Jean-Pierre Andrieu
Background: Most ant venoms consist predominantly of small linear peptides, although some contain disulfide linked peptides as minor components. However, in striking contrast to other ant species, some Anochetus venoms are composed primarily of disulfide-rich peptides. In this study, we investigated the venom of the ant Anochetus emarginatus with the aim of exploring these novel disulfide-rich peptides.Methods: The venom peptidome was initially investigated using a combination of reversed-phase HPLC and mass spectrometry, then the amino acid sequences of the major peptides were determined using a combination of Edman degradation and de novo MS/MS sequencing. We focused on one of these peptides, U-1-PONTX-Ae1a (Ae1a), because of its novel sequence, which we predicted would form a novel 3D fold. Ae1a was chemically synthesized using Fmoc chemistry and its 3D structure was elucidated using NMR spectroscopy. The peptide was then tested for insecticidal activity and its effect on a range of human ion channels.Results: Seven peptides named poneritoxins (PONTXs) were isolated and sequenced. The three-dimensional structure of synthetic Ae1a revealed a novel, compact scaffold in which a C-terminal beta-hairpin is connected to the N-terminal region via two disulfide bonds. Synthetic Ae1a reversibly paralyzed blowflies and inhibited human L-type voltage-gated calcium channels (Ca(v)1).Conclusions: Poneritoxins from Anochetus emarginatus venom are a novel class of toxins that are structurally unique among animal venoms.General significance: This study demonstrates that Anochetus ant venoms are a rich source of novel ion channel modulating peptides, some of which might be useful leads for the development of biopesticides.
ISSN: 0304-4165

hal-01511987
https://hal.archives-ouvertes.fr/hal-01511987
https://hal.archives-ouvertes.fr/hal-01511987/document
https://hal.archives-ouvertes.fr/hal-01511987/file/2016_Touchard_Biochimica_Biophysica_%7B4B3BE6A3-AE83-4C6E-B678-BBFB5CC84AF7%7D.pdf
DOI : 10.1016/j.bbagen.2016.07.027

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Abstract View references (38)Silicalite-1 (S-1) and ZSM-5 membranes prepared by secondary growth on tubular ceramic supports were tested using a pervaporation set up for the desalination of aqueous solutions containing NaCl in concentrations corresponding to brackish (0.3-1wt%), sea (3.5wt%) and brine (7.5-15wt%) water. ZSM-5 membranes delivered higher water fluxes when compared with S-1 membranes due to enhanced hydrophilicity of the Al-rich zeolite structure leading to fluxes as high as 11.5kgm -2h -1 for 0.3wt% NaCl feed solutions at 75°C. At higher salt concentration the water flux decreased alongside with the salt rejection rate, however the hydrophilic ZMS-5 membrane became more susceptible to performance loss, particularly at high temperatures. Detailed stability experiments carried out for up to 560h showed the dissolution of both S-1 and ZSM-5 top layers. This was attributed to the combined effects of ion exchange and water dissolution mechanisms. Interesting though, the MFI structure zeolite was still observed on the XRD patterns whilst EDX depth profile showed the presence of silica up to 30μm depth into the support. These results suggest the formation/infiltration of a compact amorphous phase in the substrate, derived from the aggregation of the dissolved silicate species and possibly together with the arrangement of MFI nano-slabs during the desalination tests. Despite generating lower water fluxes, the S-1 membrane exhibited relatively high robustness under the long term testing conditions which included temperature cycling, delivering salt rejections from initial >99% to <80% at the end of the testing period (560h). © 2012 Elsevier B.V.
ISSN: 0376-7388

hal-01683201
https://hal.univ-antilles.fr/hal-01683201
DOI : 10.1016/j.memsci.2012.05.074

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Displacement-length data from dilatant fractures (joints, veins, igneous dikes) and several varieties of deformation bands were analyzed statistically to investigate the applicability of mechanical models proposed for their formation. All 17 datasets are generally consistent with equilibrium or long-term power-law slopes on the displacement-length diagram of either 1.0 or 0.5. Similar to many faults, disaggregation deformation bands are consistent with a power-law scaling relation having a slope of approximately c = 1, implying a linear dependence of maximum displacement and discontinuity length (Dmax = γL). In contrast, dilatant fractures, cataclastic deformation bands, and shear-enhanced compaction bands are consistent with a power-law scaling relation with a slope of approximately c = 0.5, implying a dependence of maximum displacement on the square root of length (Dmax = αL1/2). The scaling relations represent an average, or long-term equilibrium outcome of deformation for conditions such as length-scale, time-scale, temperature, chemistry, and an effectively homogeneous far-field stress field, allowing for variations such as rapid and/or localized behaviors. The displacement-length scaling of these geologic structures follows systematic relationships that provide information on host-rock properties and the physics of fracture and deformation-band propagation.
ISSN: 0191-8141

hal-00818130
https://hal.archives-ouvertes.fr/hal-00818130
DOI : 10.1016/j.jsg.2012.12.005

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Polygonal faulting is a widespread phenomenon in sedimentary basins worldwide. It changes basin-scale fluid flow patterns and alters the physical properties of the sediments making it important for hydrocarbon exploration and geohazard analysis. It is generally accepted that polygonal fault patterns derive from dewatering and compaction of the host sediments, but there is debate regarding the processes that control polygonal faulting. New multibeam-bathymetry data from the Hatton Basin, NE Atlantic, show up to 10 m deep and 200-600 m wide troughs at the seabed. They connect to each other forming polygons that are several hundred metres across, i.e. of similar size as buried polygonal fault systems observed in 3D seismic data. The troughs are symmetrical and resemble elongated pockmarks. Previously unpublished high-resolution 2D seismic data from the same area show seismic disturbance zones similar to pipes observed under pockmarks elsewhere as well as faults that have all the characteristics of polygonal fault systems. The observation of the wide disturbance zones is enigmatic, as they appear to follow the polygonal seafloor pattern. The observed extent of the polygonal sediment contraction system is substantial covering almost 37,000 km2. We calculate that some 2600 km3 of possibly carbon-bearing fluids have been expelled from this system and we expect that this will affect the benthic ecosystems, although so far there is only limited evidence for chemosynthetic habitats.
ISSN: 0025-3227

hal-00772468
https://hal.archives-ouvertes.fr/hal-00772468
DOI : 10.1016/j.margeo.2012.09.013

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Several studies, both theoretical and experimental, show that sedimentary rocks have fractal pore-grain interface. The real rocks are 3-d structures with highly tortuous and often fractal pore spaces. Before attempting simulation of this daunting geometry, we present here, as a preliminary study, a simpler 2-d version. In this paper, a computer simulated 2-d sedimentary rock structure is generated by the relaxed bidisperse ballistic deposition model. Grains of two different sizes are dropped ballistically on a linear substrate. By changing the fraction of the two types of particles, the porosity of the rock structure can be tuned. The structure undergoes compaction through the relaxation of possible unstable overhangs. The micro structure of the pore space is investigated. The pore mass and the rock-pore interface show a fractal behaviour with the same fractal dimension indicating that the pore volume is a fractal. Our simulation results indicate that the process of compaction of grains during the deposition process seems to erase the dependency of the fractal dimension on the grain size distribution. The two point density correlation is measured for the pore space. It shows anisotropy which is an outcome of the growth rule. X-ray tomography of two-dimensional sections of real sedimentary rocks obtained from Mallorca Island is subjected to the same study and the results compared with those obtained from simulation. The simulation results agree qualitatively with the real rock sample. We also study diffusion on the pore space. Diffusion is found to be anomalous as is expected in fractal spaces. It also bears the signature of anisotropy of the structure. Diffusion studies on the real rock sample could not yield conclusive results as the system size is not large enough.
ISSN: 0926-9851

hal-00761818
https://hal.archives-ouvertes.fr/hal-00761818
DOI : 10.1016/j.jappgeo.2012.09.002

Éditeur(s) : HAL CCSD Taylor & Francis
Résumé : International audience
We provide an inequality relating the radial directional derivative and the subdifferential of proper lower semicontinuous functions, which extends the known formula for convex functions. We show that this property is equivalent to other subdifferential properties of Banach spaces, such as controlled dense subdifferentiability, optimality criterion, mean value inequality and separation principles. As an application, we obtain a first-order sufficient condition for optimality, which extends the known condition for differentiable functions in finite-dimensional spaces and which amounts to the maximal monotonicity of the subdifferential for convex lower semicontinuous functions. Finally, we establish a formula describing the subdifferential of the sum of a convex lower semicontinuous function with a convex inf-compact function in terms of the sum of their approximate epsilon-subdifferentials. Such a formula directly leads to the known formula relating the directional derivative of a convex lower semicontinuous function to its approximate epsilon-subdifferential.
ISSN: 0233-1934

hal-00694601
https://hal.archives-ouvertes.fr/hal-00694601
DOI : 10.1080/02331934.2011.645034

Résumé : Árbol frutal de hasta 20 m, con copa densa, redondeada o elongada.. Hojas alternas, elípticas a obovadas, agudas o acuminadas en el ápice, cuneadas a redondeadas en la base, penninervadas. Panículas más cortas que las hojas, subterminales; flores perfectas, verdoso-amarillentas; lóbulos del cáliz pubescentes en ambas superficies. Fruto muy variable en forma, tamaño, color y calidad de la pulpa.
Arbre fruitier pouvant atteindre 20 m, tête dense, arrondie ou allongée. Feuilles alternes, elliptiques à obovales, aiguës ou acuminées à la pointe, cunéiformes à arrondies à la base, penninervées. Panicules plus courtes que les feuilles, subterminales; fleurs parfaites, vert-jaunâtres; lobes du calice pubescents sur les deux surfaces. Fruit très variable, drupe généralement ovale, écorce verte, pulpe molle renfermant une seule grande graine.
Tree 14-40 m high. Leaves alternate, simple, entire, elliptic to obovate, acute or acuminate at the tip, cuneate or rounded at the base, penninerved, 6-30 cm x 3.5-19 cm. upper surface glabrescent, lower surface glaucose; inflorescence axilary, compact or loose panicles; flowers perfect, greenish-yellowish, perianth segments 4-6 mm long; fruit a pear-shaped drupe, shiny, green or purplish, up to ca.15 cm long; seed fleshy, loose in the pericarp at maturity.
Originaria de América tropical, cultivada en las zonas tropicales y subtropicales.
Originaire d&rsquo;Amérique tropicale, cultivée dans les zones tropicales et subtropicales.
Native to tropical America, cultivated in tropical and subtropical regio

http://www.tramil.net/fototeca/plant272

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
A new portable sampling system was developed to extract Radium isotopes from large volumes (up to 300 L) of fresh surface- and ground-waters of low Ra-activities (<5 mBq/L). Ra is quantitatively adsorbed on a small amount (6.5 g) of MnO2-coated acrylic fibers, which are then dried and burned at 600 °C in the laboratory. The resulting Mn-oxide powder (about 2 cm3 when compacted) is then analyzed through gamma-ray spectrometry which allows measurement of the whole Ra quartet (226Ra, 228Ra, 224Ra and 223Ra) in a single counting of a few days. The usual relative standard combined uncertainties (1σ) are 2–3% for 226Ra, 228Ra and 224Ra; and less than 10% for 223Ra. This method was applied to the analysis of Ra in karstic waters of the Lez aquifer, and surface- and ground-waters of the upper and middle Vidourle watershed (South of France). The analyzed waters have relatively low 226Ra activities (1–4 mBq/L) in both cases, regardless of the contrasted geology (Mesozoic limestone vs crystalline Variscan basement), but clearly distinct (228Ra/226Ra) ratios in agreement with the differences in Th/U ratios of the two drained areas. Short-lived Ra isotopes (224Ra and 223Ra) appear to be mainly influenced by near-surface desorption/recoil processes for most of the sampling sites.
ISSN: 0969-8043

hal-01491281
https://hal.archives-ouvertes.fr/hal-01491281
DOI : 10.1016/j.apradiso.2016.12.010

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
3D seismic data located in the Gjallar Ridge (Vøring Basin, offshore Norway) reveals a closely-spaced polygonal fault system affecting more than 800 m of homogeneous mud-dominated Quaternary and Tertiary sequences. As some faults reach the modern seafloor, they represent an active polygonal fault system at present day. Even if the processes remain unclear and are still under debate, it is generally agreed that the initiation of polygonal faults is the result of shallow burial dewatering of fine-grained unconsolidated sediments by volumetric compaction. 3D seismic data are commonly interpreted by propagating horizons automatically and by picking faults manually. However, in the case of polygonal fault intervals, this approach is time consuming due to the huge number of faults and because automatic propagation can be misleading. In this study, we applied a new technique of 3D seismic interpretation based on a sequential stratigraphy analysis, using the new PaleoScan© software (Eliis Company). It allowed us to build a 3D geological model computing more than 300 horizons within the faulted intervals. We then used the coherency attribute, depicting anomalies in the shape of seismic waveform like faults, in order to constrain a possible link between fault distribution and stratigraphic levels. Our approach allows fault throws to be calculated in milliseconds on any polygonal fault plane. The result shows that fault segments have been reactivated by dip-linkage. Distribution of faults depends on mechanical units, intervals characterized by different petrophysical properties, which are independent from lithological and diagenetic changes. According to these results, we propose a model showing the evolution of polygonal fault intervals in which faulting stages are separated by a quiescence phase during burial. A first tier of polygonal faults is initiated at a specific depth, according to the Cam-clay model. Then, following a period of quiescence during which mud-rich sediments continued to accumulate, new fault segments are initiated above the first mechanical unit and within this undeformed interval. New nucleated faults then connect downward to pre-existing underlying polygonal fault system, thus progressively increasing the thickness of the faulted interval.
ISSN: 0025-3227

hal-00772470
https://hal.archives-ouvertes.fr/hal-00772470
DOI : 10.1016/j.margeo.2012.07.016

Éditeur(s) : HAL CCSD Department of Mathematics and Informatics, Faculty of Sciences, University of Novi Sad
Résumé : International audience
We present some remarks about the embedding of spaces of Schwartz distributions into spaces of Colombeau generalized functions. Following ideas of M. Nedeljkov et alii, we recall how a good choice of compactly supported mollifiers allows to perform globally the embedding of D' () into G (). We show that this embedding is equal to the one obtained with local and sheaf arguments by M. Grosser et alii, this giving various equivalent technics to embed D'() into G ().
ISSN: 1450-5444

hal-01530751
https://hal.univ-antilles.fr/hal-01530751
https://hal.univ-antilles.fr/hal-01530751/document
https://hal.univ-antilles.fr/hal-01530751/file/NS04_25.PDF

Éditeur(s) : HAL CCSD Elsevier
Résumé : Detailed sedimentological investigations on numerous outcrops and drill-core sections in the 2.1-Ga-old Franceville basin, Gabon, provide evidence for a large-scale injectite network. The injectites were formed by the injection of sands through a thickness of about 150 m of the FB1 Member, and now cover a minimum area of 70 km2 corresponding to the Bangombé plateau, but are also recognized close to Franceville 35 km farther south-east. The injectite lithology corresponds to a mud- or carbonate-supported sandstone characterized by a loose and uncompacted fabric contrasting with the host-rock. Because the injectites are often parallel to subparallel to the stratification, they were misinterpreted as depositional beds by previous authors. At outcrop, the injectite bodies exhibit sill, dyke, wing and protrusive geometries emplaced during early burial within poorly compacted material, with partial wall erosion and dissociation. The source of the sand material is attributed to a channel-levee turbidite depositional system located in the lower part of the FB1 Member. These deposits were buried by a thick biochemical muddy cap deposited during a starvation phase, which increased the seal capacity of the system. This type of architecture has a high potential to develop compaction disequilibrium during burial. Moreover, in the case of the Francevillian injectites, the abundance of microbial organic matter favoured early methane degassing and lateral charging of the sand reservoir. The overpressure in the channels was periodically released during early burial, through the effect of rapid sedimentary and tectonic loading, and possible seismic activity. The fluidized sand was injected according to a symmetrical wing pattern. Thus, the injected masses caused a local decrease in the grade of the lateritic manganese ore deposit of the Bangombé plateau.
ISSN: 0301-9268

hal-01667217
https://hal.archives-ouvertes.fr/hal-01667217
DOI : 10.1016/j.precamres.2017.09.022