Éditeur(s) : Ecole Nationale Supérieure Agronomique de Rennes (ENSAR)
Résumé : Artificial Fish Aggregating Devices (FADs) are known to concentrate tropical tunas. This aggregative behaviour drastically increases the vulnerability of these species to fishing. Alternatively, FADs can be used as oceanic observatories to study the aggregative behaviour of large pelagic fish. We conducted sea surveys in Martinique (Lesser Antilles) to i) establish a typology of the pelagic fish aggregations found around moored FADs ii) study their relations with their biotic and abiotic environment and the local fishery. The mean biomass of large pelagic fish aggregations was also estimated to provide scientific inputs to achieve a sustainable management of the moored FAD fishery. The first part presents the background of the study. We introduce the regional pelagic ecosystem, the aggregative behaviour of pelagic fish around FADs and the Martinican moored FAD fishery. The second part begins with a presentation of the conceptual framework of the study: the hierarchy theory. Observation scales and survey methodology are therefore described. Repeated echosounder surveys run in a star pattern were conducted around 2 moored FADs, in combination with underwater video observations, classical fishing experiments and CTD profiles. In the third part, the elements of the [moored FAD ¿ pelagic fish - environment - fishing] system and their interactions are numerically characterised in the vertical plane. The main type of pelagic fish aggregation was a large aggregation distributed in sub-surface (40-100 m) within a radius of 400 m of the FAD. This aggregation was mostly made of 60 cm FL blackfin tunas (Thunnus atlanticus). It appeared at sunrise and mostly spread away in the late afternoon. It was observed during all daytime surveys. The average density and the vertical structure of the micronektonic sound scattering layers (SSLs) were assessed locally around a FAD for 48h cycles. These SSLs descriptors showed positive correlation with the size and the abundance of the sub-surface tuna aggregation. Whereas this aggregation accounted for about 95% of the total biomass aggregated around a moored FAD, it was nearly unexploited by the local commercial fishermen. The fourth part focuses on the sub-surface tuna aggregation. A high variability of the spatial distribution of the aggregation was evidenced in the horizontal plane at daily, day to day and monthly temporal scales. These variations were related to fluctuations of the global abundance of the aggregation. The daytime average density of sub-surface tuna was modelled as a function of the distance to FAD, within an advection-diffusion framework. Based on these results, a universal kriging model was designed to assess the mean maximum daily biomass of the sub-surface tuna aggregation. This mean biomass estimate yielded 11 tons with an estimation error of 26%. To conclude, we present a hierarchical organization in space and time of a sub-surface tuna population distributed within a network of moored FADs, from micro to meso-scale. We suggest that the spatial distribution of tunas can be explained from fine to coarse-scales by behavioural processes (self-organization, feeding, aggregative behaviour) whereas their spatial distribution is mainly forced by environmental processes at broader scales.
L'utilisation de Dispositifs de Concentration de Poissons permet de provoquer la formation de larges agrégations de thonidés autour de dispositifs artificiels, ce qui augmente considérablement la vulnérabilité de ces ressources vis-à-vis de l'exploitation halieutique. Les DCP peuvent également être utilisés en tant qu'observatoires océaniques, afin d'étudier le comportement agrégatif du macronecton pélagique. Nous avons ainsi réalisé des observations autour de DCP ancrés en Martinique, afin de définir une typologie des agrégations de macronecton et de étudier leurs relations avec leur environnement biotique, abiotique et l'exploitation halieutique locale. Nous avons ensuite estimé la biomasse moyenne de macronecton agrégé autour d'un DCP ancré, afin de fournir des éléments scientifiques nécessaires à une gestion durable de ces ressources. La première partie présente le contexte de l'étude i.e. l'écosystème pélagique régional, le phénomène d'agrégation du macronecton autour des DCP et la pêche associée aux DCP ancrés en Martinique. La deuxième partie introduit la théorie de la hiérarchie qui a fourni le cadre conceptuel de l'étude et présente les échelles et méthodes d'observation. Le principal outil d'observation est un échosondeur scientifique, mis en oeuvre le long de parcours en étoile autour du DCP. Les prospections acoustiques ont été combinées à des observations vidéo sous marines, des pêches expérimentales et un suivi in-situ de l'environnement abiotique. La troisième partie présente une typologie des éléments constituant le système [DCP ancré - macronecton - environnement - pêche] dans le plan vertical et précise leurs interactions. Le type d'agrégation de macronecton dominant est une grande agrégation composée d'une majorité de thons noirs (Thunnus atlanticus) de taille moyenne (60 cm) distribuée en sub-surface (40-100 m), dans un rayon de 300 m autour de la tête des DCP. Cette agrégation se forme au lever du soleil et se disperse presque totalement dans l'après midi. Elle a été observée de jour lors de toutes les campagnes. Une corrélation positive entre la densité et la structure moyenne des couches micronectoniques diurnes évaluée localement autour du DCP au cours de 48 h et les dimensions et l'énergie acoustique de l'agrégation de thons de subs-surface a été mise en évidence. Malgré le fait que cette agrégation représente en moyenne 95 % de l'énergie acoustique du macronecton autour des DCP, elle est presque inexploitée par les pêcheurs artisans locaux. La quatrième partie met en évidence les fortes variations conjointes de la distribution spatiale dans le plan horizontal de la densité de l'agrégation de thons de sub-surface et de son abondance globale. Ces variations ont été observées au cours du cycle nycthéméral et aux échelles inter-journalières et mensuelles. La distribution spatiale moyenne de la densité diurne de l'agrégation en fonction de la distance au centre de gravité de l'agrégation est cependant très stable et peut être modélisée au moyen d'une équation d'advection-diffusion. Un modèle de krigeage universel, utilisant les résultats du modèle d'advection-diffusion, a permis d'évaluer la biomasse maximale journalière moyenne de l'agrégation de thons de sub-surface à une dizaine de tonnes, avec un coefficient de variation d'estimation de 26%. Nous proposons une représentation hiérarchique synthétique de la distribution spatiale d'une sous-population de thons dans un réseau de DCP ancrés de la micro à la méso-échelle. Nous suggérons que la distribution spatiale des thons est déterminée principalement à l'échelle fine (100m-1km) et à l'échelle grossière (1-10 km) par des processus comportementaux (auto-organisation, agrégation, nutrition) et par des processus environnementaux à échelle plus large.

Droits : info:eu-repo/semantics/openAccess
http://archimer.ifremer.fr/doc/2006/these-1735.pdf
http://archimer.ifremer.fr/doc/2006/sup-1735.pdf
http://archimer.ifremer.fr/doc/00000/1735/

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
Fractures or discontinuities perpendicular to the least stress σ3 were generated in a synthetic rock analogue (granular, frictional, cohesive, and dilatant) material in axisymmetric extension tests. These fractures are of two types defined by the mean stress σ. When σ is very small, the fractures form through the mode I cracking at tensile σ3 equal to the material tensile strength. The fracture walls have smooth surfaces. At higher σ, these surfaces become rougher, with the topography features forming faint or delicate plumose patterns. The amplitude of the plumose topography increases with σ. The axial stress σ3 at fracturing reduces in magnitude and changes in sign with the σ increase. Thus σ3 orthogonal discontinuities can form at compressive σ3. SEM observations show that these discontinuities are deformation localization bands where the material is characterized by the heterogeneous decohesion and volume and porosity increase due to dilatancy. The band thickness is several grain sizes. At formation, the bands are not opened, so they are not mode I fractures. They become fractures with plumose fractography after the separation of the sample parts along the band. The formation mechanism of these discontinuities or fractures is not completely clear, but it is suggested that it represents a running constitutive instability in the form of dilatancy banding (with further σ increase the bands become inclined to σ1, i.e., shear). The similarity between the experimentally generated plumose surface fractures and natural joints is discussed, and it is suggested that they can be formed as propagating constitutive instabilities.
ISSN: 0148-0227

hal-00585846
https://hal.archives-ouvertes.fr/hal-00585846
DOI : 10.1029/2010JB008104

Éditeur(s) : HAL CCSD
Résumé : International audience
The published literature related to distributed parameter systems theory is quite large, and it is not feasible in a single book to give a detailed review on the wide historical development of all of it. Our choice of what to cover was motivated by the following consideration. Since distributed parameter systems evolve in time and space, the research investigations on their analysis and control focus on considering the whole system domain for any study. We feel strongly that within this research field, animportant consideration was missing; that of considering that the system may give raise to prescribed subdomains (regions) where one has to achieve an objective. This is the case of so many applications ranging from engineering to life sciences. For that reason, covering classical prerequisite in analysis and control areas, we have devoted the book to the extension of the classical distributed parameter results to regional ones.Students of mathematics do not come into contacts with distributed parameter systems during their classes. They are introduced to them when they start research and often they are influenced by the knowledge and the advice of experimented scientists. This was our case at the very beginning of these research investigations in the mid 70’s. We would liketo express our special thanks to many of them and mainly late Professor Anthony J. Pritchard (University of Warwick, GB) and late Professor J.L. Lions (College de France) who were so encouraging in front of our determination in driving an academic carrier. We also express our thanks to our co-workers and research students. We wish to acknowledge the feedback from all those who took courses based on various parts of this book.This book may be used by graduate students in mathematics, engineering, physics, and even by students from other fields such as life or environmental sciences. This book may also be used as an information source for researchers and education professionals. We assume that the readers already know the basic concepts of analysis and control of distributedparameter systems.
https://hal.archives-ouvertes.fr/hal-01297188

ISBN : 978-2-35412-140-2
hal-01297188
https://hal.archives-ouvertes.fr/hal-01297188

Éditeur(s) : HAL CCSD
Résumé : Nous proposons dans cet article de mettre en avant quelques idées pour la simulation numérique de plusieurs classes d'équations d'ondes dispersives (KdV, Benjamin-Ono) ou non (Kuramoto-Sivashinski) par des méthodes multiniveaux. Nous partons des idées initialement développés pour les équations dissipatives et en proposons une extension. Il en ressort que la présence d'une régularisation en temps est nécessaire pour pouvoir traiter de manière stable, et avec des schémas appropriés, les différentes échelles de la solution, préalablement générées à l'aide de méthodes hierarchiques (inconnues incrémentales, ondelettes, Fourier)
https://hal.inria.fr/inria-00271154

inria-00271154
https://hal.inria.fr/inria-00271154
https://hal.inria.fr/inria-00271154/document
https://hal.inria.fr/inria-00271154/file/cclz.pdf

Éditeur(s) : HAL CCSD American Institute of Physics
Résumé : International audience
In order to be able to provide valuable data in multiparameter measurement field operations, tiltmeters need to have a noise level better or equal than 10-9 rad for a period range from a few minutes to a few years and a long term stability ranging from 10-7 to 10-8 rad/yr. Tiltmeter measurements should also be as much as possible insensitive to thermal disturbances, by taking great care of the horizontality of the base line tube first. Secondly, thermal responses have been assessed. We also took great care of the coupling of our tiltmeters with the bedrock. We've designed a long base tiltmeter with sensors in silica which has a low dilatation coefficient. The linear variable displacement transducer is based on coil coupling (powered by an alternative voltage). Finally we show the results of two 100 m silica water tube tiltmeters which were installed in a mine in the French Vosges massif in the framework of a hydrology research project. These instruments show a remarkably good stability (6.5×10-9 rad/month) and a low noise level (of the order of 10-11 rad). Toroidal and spheroidal free modes of the Earth were observed after the two last major earthquakes on Sumatra.
ISSN: 0034-6748

hal-00708013
https://hal.archives-ouvertes.fr/hal-00708013
https://hal.archives-ouvertes.fr/hal-00708013/document
https://hal.archives-ouvertes.fr/hal-00708013/file/2008_RSI.pdf
BIBCODE : 2008RScI...79c4502B

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The objectives are to study and model the aggregate wind power fluctuations dynamics in the multifractal framework. We present here the analysis of aggregate power output sampled at 1 Hz during three years. We decompose the data into several Intrinsic Mode Functions (IMF) using Empirical Mode Decomposition (EMD). We use a new approach, arbitrary order Hilbert spectral analysis, a combination of EMD approach with Hilbert spectral analysis (or Hilbert Huang Transform) and the classical structure function analysis to extract the scaling exponents or multifractal spectrum $zeta(q)$: this function provides a full characterization of a process at all intensities and all scales. The application of both methods, i.e. structure function and arbitrary-order Hilbert spectral analyses, give similar results indicating that the aggregate power output from a wind farm, possesses intermittent and multifractal properties. In order to check this result, we generate stochastic simulations of a Multifractal Random Walk (MRW) using a log-normal stochastic equation. We show that the simulation results are fully compatible with the experimental results.
Physica A

hal-01527887
https://hal.archives-ouvertes.fr/hal-01527887
DOI : 10.1016/j.physa.2013.04.038

Éditeur(s) : HAL CCSD Royal Society, The
Résumé : International audience
To forecast marine disease outbreaks as oceans warm requires new environmental surveillance tools. We describe an iterative process for developing these tools that combines research, development and deployment for suitable systems. The first step is to identify candidate host–pathogen systems. The 24 candidate systems we identified include sponges, corals, oysters, crustaceans, sea stars, fishes and sea grasses (among others). To illustrate the other steps, we present a case study of epizootic shell disease (ESD) in the American lobster. Increasing prevalence of ESD is a contributing factor to lobster fishery collapse in southern New England (SNE), raising concerns that disease prevalence will increase in the northern Gulf of Maine under climate change. The lowest maximum bottom temperature associated with ESD prevalence in SNE is 128C. Our seasonal outlook for 2015 and long-term projections show bottom temperatures greater than or equal to 128C may occur in this and coming years in the coastal bays of Maine. The tools presented will allow managers to target efforts to monitor the effects of ESD on fishery sustainability and will be iteratively refined. The approach and case example highlight that temperature-based surveillance tools can inform research, monitoring and management of emerging and continuing marine disease threats.
ISSN: 0080-4622

Droits : http://creativecommons.org/licenses/by/
hal-01282834
https://hal-univ-perp.archives-ouvertes.fr/hal-01282834
https://hal-univ-perp.archives-ouvertes.fr/hal-01282834/document
https://hal-univ-perp.archives-ouvertes.fr/hal-01282834/file/20150208.full.pdf
DOI : 10.1098/rstb.2015.0208

Éditeur(s) : HAL CCSD Elsevier
Résumé : To contribute to the understanding of how opening-mode fractures (joints) form and open or close at depth in layered rocks, we present a 2D numerical study aiming to determine whether tensile stress can develop in pre-fractured elastic multilayers submitted to biaxial compressive strain conditions. First, we investigate the role of the elastic and geometrical properties of the layers on the development of tensile stress in models with five bonded layers and containing one open fracture in the central layer. Our results indicate that, in absence of elastic contrast (in Young's modulus) between the layers, no tensile stress develops in the models. However, when the fractured layer is stiffer than the two adjacent layers directly above and below, a lobe of horizontal tensile stress develops centered on the pre-existing fracture. The creation of this tensile stress is contingent upon the partial closing of the fracture. The levels of tensile stress and the thickness of the lobe of tensile stress increase logarithmically with an increase in the elastic contrast and are systematically larger for a larger Soft/Stiff ratio (ratio of the total thickness of the soft layers with the total thickness of the stiff layers). Second, we investigate the role of fracture interaction in the development of tensile stress in models containing a pair of open fractures. We observe that the levels of tensile stress in the region between the fractures are systematically higher than those observed in identical models containing a single fracture. This increase in tensile stress is very large for small elastic contrasts between the layers but diminishes when the elastic contrast increases. Furthermore, the spacing between the pre-existing fractures plays an important role in the stress distribution in the region between them. When the fracture spacing is equal to or lower than 1.15 times the height of the fractured layer for the experimental conditions chosen, the lobes of tensile stress centered on the fractures coalesce. This results in the formation of vast areas of tensile stress in models under remote compressive loading conditions. Such tensile areas are likely to allow the initiation and propagation of subsequent opening-mode fractures. The results obtained provide new insights into the formation of joints in layered rocks in compressive environments, with important consequences on fluid flow.
ISSN: 0040-1951

hal-00407576
https://hal.archives-ouvertes.fr/hal-00407576
DOI : 10.1016/j.tecto.2006.12.003

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
ISSN: 0168-9274

hal-00530819
https://hal.archives-ouvertes.fr/hal-00530819
DOI : 10.1016/j.apnum.2009.12.006

Éditeur(s) : HAL CCSD Springer Verlag
Résumé : The core structures of dislocations in diopside have been calculated within the Peierls model, which assumes a planar core. 1/2 < 110 > dislocations can dissociate into two collinear partial dislocations. We show that [001] glide is very difficult in (010) and that a non-collinear dissociation of [001](100) (modelled within a Peierls-Nabarro-Galerkin approach) makes glide equally easy in (100) and {110}. A widely spread core structure corresponding to a low lattice friction has been found for [100](010) and [010](100) dislocations which is not supported by mechanical data and, together with TEM observations, suggests that another, probably non-planar core structure is possible for these dislocations.
ISSN: 0342-1791

hal-00558238
https://hal.archives-ouvertes.fr/hal-00558238
DOI : 10.1007/s00269-010-0370-7

Éditeur(s) : HAL CCSD Elsevier
Résumé : We present the hierarchical matrix (H-matrix) technique combined with the adaptive cross-approximation (ACA) applied to a three-dimensional (3D) elastostatic problem using the boundary element method (BEM). This is used in structural geology and geomechanics for the evaluation of the deformation and perturbed stress field associated with surfaces of displacement discontinuity. Such optimization significantly reduces (i) the time and memory needed for the resolution of the system of equations, but more importantly (ii) the time needed for the post-processing at observation points where the deformation and the perturbed stress field are evaluated. Specifically, it is shown that the H-matrix structure used with the ACA, clearly captures the kernel smoothness during the post-processing stage according to the field point positions, and optimizes the computation accordingly. Combined with the parallelization on multi-core processors, this technique allows intensive computations to be done on personal desktop and laptop computers. Numerical simulations are presented, showing the advantages of such optimizations compared to the standard method.
ISSN: 0955-7997

hal-00561032
https://hal.archives-ouvertes.fr/hal-00561032
DOI : 10.1016/j.enganabound.2009.10.016

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The Roussillon sedimentary Basin (South France) is a complex multi-layered aquifer, close to the Mediterranean Sea facing seasonally increases of water abstraction and salinization issues. We report geochemical and isotopic vertical variability in this aquifer using groundwater sampled with a Westbay System® at two coastal monitoring sites: Barcarès and Canet. The Westbay sampling allows pointing out and explaining the variation of water quality along vertical profiles, both in productive layers and in the less permeable ones where most of the chemical processes are susceptible to take place.The aquifer layers are not equally impacted by salinization, with electrical conductivity ranging from 460 to 43,000 μS·cm− 1. The δ2H–δ18O signatures show mixing between seawater and freshwater components with long water residence time as evidenced by the lack of contribution from modern water using 3H, 14C and CFCs/SF6. S(SO4) isotopes also evidence seawater contribution but some signatures can be related to oxidation of pyrite and/or organically bounded S. In the upper layers 87Sr/86Sr ratios are close to that of seawater and then increase with depth, reflecting water–rock interaction with argillaceous formations while punctual low values reflect interaction with carbonate. Boron isotopes highlight secondary processes such as adsorption/desorption onto clays in addition to mixings. At the Barcarès site (120 m deep), the high salinity in some layers appear to be related neither to present day seawater intrusion, nor to Salses-Leucate lagoonwater intrusion. Groundwater chemical composition thus highlights binary mixing between fresh groundwater and inherited salty water together with cation exchange processes, water–rock interactions and, locally, sedimentary organic matter mineralisation probably enhanced by pyrite oxidation.Finally, combining the results of this study and those of Caballero and Ladouche (2015), we discuss the possible future evolution of this aquifer system under global change, as well as the potential management strategies needed to preserve quantitatively and qualitatively this water resource.
ISSN: 0048-9697

hal-01685219
https://hal-brgm.archives-ouvertes.fr/hal-01685219
DOI : 10.1016/j.scitotenv.2016.05.016

Éditeur(s) : HAL CCSD American Chemical Society
Résumé : International audience
Chlordecone is an organochlorine pesticide that was extensively used in the French West Indies to fight weevils in banana plantations from 1973 to 1993. This has led to a persistent pollution of the environment and to the contamination of the local population for several decades with effects demonstrated on human health. Chlordecone accumulates mainly in the liver where it is known to potentiate the action of hepatotoxic agents. However, there is currently no information on its in situ localization in the liver. We have thus evaluated a matrix-assisted laser desorption ionization (MALDI) imaging quantification method based on labeled normalization for the in situ localization and quantification of chlordecone. After validating the linearity and the reproducibility of this method, quantitative MALDI imaging was used to study the accumulation of chlordecone in the mouse liver. Our results revealed that normalized intensities measured by MALDI imaging could be first converted in quantitative units. These quantities appeared to be different from absolute quantities of chlordecone determined by gas chromatography (GC), but they were perfectly correlated (R(2) = 0.995). The equation of the corresponding correlation curve was thus efficiently used to convert quantities measured by MALDI imaging into absolute quantities. Our method combining labeled normalization and calibration with an orthogonal technique allowed the in situ absolute quantification of chlordecone by MALDI imaging. Finally, our results obtained on the pathological mouse liver illustrate the advantages of quantitative MALDI imaging which preserves information on in situ localization without radioactive labeling and with a simple sample preparation.
ISSN: 0003-2700

hal-01118103
https://hal-univ-rennes1.archives-ouvertes.fr/hal-01118103
PUBMED : 24837422
DOI : 10.1021/ac500313s

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Evidence of the impact of exposure to low levels of lead on children's health is increasing. Residential floor dust is the assumed origin of lead exposure by young children. In this study, we estimate the contribution of different lead sources to household interior floor dust contamination. We also estimate the within-home variability of interior floor dust lead loadings. A multilevel model was developed based on data collected in a French survey in 2008-2009 (484 housing units, 1834 rooms). Missing data were handled by multiple imputation using chained equations. The intra-home correlation between interior floor Log dust lead loadings was approximately 0.6. Dust lead from the landing of an apartment, mostly originating outside the building, was the major contributor to interior floor dust lead. Secondary contributors included the lead-based paint on exterior railings, track-in of the exterior soil of the children's play area into the dwelling, smoking inside the home, demolition of nearby old buildings and sites of pollution in the vicinity. Interior lead-based paint contaminated interior floor dust only in old and non-renovated dwellings. To reduce interior floor dust lead levels in the general population of dwellings, common areas should be maintained, and track-in from the outside should be limited as much as possible.
ISSN: 0048-9697

hal-01017419
https://hal-univ-rennes1.archives-ouvertes.fr/hal-01017419
https://hal-univ-rennes1.archives-ouvertes.fr/hal-01017419/document
https://hal-univ-rennes1.archives-ouvertes.fr/hal-01017419/file/Source_Contribution_final.pdf
DOI : 10.1016/j.scitotenv.2013.10.028

Éditeur(s) : HAL CCSD Mineralogical Society of America
Résumé : International audience
Crystallization experiments were conducted at 200 MPa to determine the effect of small amounts of H2O on the liquidus temperature of basaltic melts in which plagioclase is the liquidus phase. The H2O concentrations in the quenched glasses, determined by infrared spectroscopy and Karl-Fischer titration, ranged from 0.02 to 4.2 wt% H2O. The dry liquidus temperature at 200 MPa was estimated from experiments at 1 atm (H2O-free) and from the known pressure dependence of plagioclase crystallization temperature. The effect of water (expressed as wt% H2O) on the plagioclase liquidus temperature is nonlinear and diminishing with increasing melt H2O concentrations. According to our new experimental data, it can be empirically predicted with following equation: Formula where CH2O is the water concentration in the melt (wt%), TDRY, and TWET are plagioclase crystallization temperatures in water-free and water-bearing systems, respectively. The relationship between CH2O and liquidus temperature worked out in this study is valid for a range of basaltic compositions, ranging from high-alumina basalts to basaltic andesites. The combination of the empirical equation predicting the liquidus depression of plagioclase with previous models predicting the olivine liquidus curve is useful to determine the liquidus temperature in various H2O-bearing basaltic systems in which either plagioclase or olivine is the liquidus phase.
ISSN: 0003-004X

hal-00757600
https://hal.archives-ouvertes.fr/hal-00757600
DOI : 10.2138/am.2012.4100

Éditeur(s) : HAL CCSD
Résumé : The purpose of this work is to specify the deformation offshore East of Taiwan by characterizing major active faults in particular at the level of the Ryukyu forearc. The major problem associated with the study of this region is that earthquakes are located outside the permanent networks. Consequently, this led to some unprecise earthquake locations limiting tectonic and statistical analyses, and therefore the correct estimation of the seismic hazard. This work is included in the project ANR ACTS (Active Tectonics and Seismic Hazard in Taiwan). To achieve this goal, we worked on three different timescales for which a different localization method has been proposed to obtain a clear image of seismic deformation and highlight major faults offhore East of Taiwan. First, at the scale of the century (from the analysis of a seismicity catalogue with homogeneous magnitude), the instrumental historical earthquakes (1897-2007) show that the Ryukyu margin was affected by 6 earthquakes of magnitude greater than 7 with 4 of them for which the responsible fault is unknown. We propose a method of relative location to relocate the historic events from the time difference of P and S arrival times (Ts-Tp) at each station. The location is obtained by searching for "analogue" earthquakes in the recent instrumental catalogue (1991-2008) for which Ts-Tp at each station is close. This method has been applied to the largest (in terms of magnitude) earthquake ever recorded in Taiwan, the earthquake of June 5, 1920 (M7.7 +/- 0.2). A rupture along the interplate of the Ryukyu subduction with a possible nucleation at the downdip limit of a splay-fault is certainly responsible of this earthquake. Then, at the scale of the decade, the improvement of the method of absolute location based on MAXimum of Intersection of EDT (MAXI, EDT: Equal Differential Time) allows to better extract the erroneous arrival times and prevents the "trade-off" between depth and origin time, and between depth and epicentral position when the azimuthal coverage is low (gap Azimuthal > 180degre). Synthetic tests show the effectiveness of MAXI (using P-wave only) to determine the parameters x, y and z even when the azimuthal gap is important. In the latter case, the quality of the results is dependent on the velocity model to represent the 3D structure of the Earth. We propose an approach involving the use of a 3D a priori P-wave velocity model to locate earthquakes which are lateral and remote to the seismic network. An application to the case of Taiwan and Ecuador validates this approach. Finally, at the level of a few months, the marine geophysical campaign RATS (Ryukyu Arc: Tectonics and Seismology) was conducted in two stages. A passive seismology experiment from July to October, 2008 (RATS1) has been conducted over the forearc of the Ryukyus and then active seismic experiment (refraction and reflection) was conducted in May 2009 in a NNE - SSW line through the Ryukyu margin. These two combined experiments allow improving our knowledge about the crustal structure of the margin. At the level of the forearc, the basement of the forearc is characterized by vertical backstop and a very deformed basis certainly associated with a significant out of sequence deformation. In depth, the downgoing plate is certainly affected by a tear that controls the seismicity in the region of transition between the subduction and collision.
Le but de ce travail est de préciser la déformation en mer à l'est de Taïwan et de notamment caractériser les failles actives majeures en particulier au niveau de l'avant-arc des Ryukyus. Le problème majeur associé à l'étude de cette région est que les séismes sont localisés en dehors des réseaux permanents et que cela conduit à des localisations peu précises limitant les analyses statistiques, tectoniques et donc l'estimation correcte de l'aléa sismique. Ce travail est inclus dans le projet ANR ACTS (Active Tectonics and Seismic Hazard in Taiwan). Pour atteindre cet objectif, nous travaillons à trois échelles de temps différentes pour lesquelles une méthode de localisation différente a été proposée pour obtenir une image précise de la déformation sismique et mettre en évidence les failles majeures en mer à l'est de Taïwan. D'abord, à l'échelle du siècle (à partir de l'analyse d'un catalogue de sismicité homogène en magnitude), les séismes historiques instrumentaux (1897-2007) montrent que la marge des Ryukyus a été affectée par 6 séismes de magnitude supérieure à 7 dont 4 pour lesquels la faille responsable n'est pas connue. Nous proposons une méthode de localisation relative qui permet de relocaliser les évènements historiques à partir des différences de temps d'arrivées P et S (Ts-Tp) à chaque station. La localisation est obtenue en recherchant les séismes analogues dans le catalogue instrumental récent (1991-2008) pour lesquels Ts-Tp à chaque station est proche. Cette méthode a été appliquée au plus gros séisme (en terme de magnitude) jamais enregistré à Taïwan, le séisme du 5 juin 1920 (M7.7 $pm$ 0.2). Ce séisme a certainement pour origine une rupture sur l'interplaque sismogène de la subduction des Ryukyus avec une possible nucléation à la base d'une faille hors-séquence. Ensuite, à l'échelle de la dizaine d'années, l'amélioration de la méthode de localisation absolue du MAXimum d'Intersection EDT (MAXI, EDT: Equal Differential Time) permet de mieux extraire les temps d'arrivées erronés et empêche les "trade-off" entre profondeur et temps d'origine et, entre profondeur et position épicentrale lorsque la couverture azimutale est faible (gap azimutal > 180°). Des tests synthétiques montrent l'efficacité de MAXI (en utilisant les ondes P uniquement) à déterminer les paramètres x, y et z même lorsque le gap azimutal est important. Dans ce dernier cas, la qualité des résultats reste dépendant du modèle de vitesse à représenter la structure 3D de la Terre. Nous proposons une démarche associant l'utilisation d'un modèle de vitesse des ondes P 3D a priori avec la méthode MAXI pour localiser les séismes qui sont latéraux et éloignés du réseau. Une application au cas de Taïwan et en Équateur valide cette approche. Enfin, à l'échelle de quelques mois, la campagne de géophysique marine RATS (Ryukyu Arc: Tectonics and Seismology) a été menée en deux temps. Une expérience de sismologie passive de juillet à octobre 2008 (RATS1) a été menée au-dessus de l'avant-arc des Ryukyus puis une expérience de sismique active (réfraction et réflexion) a été menée en mai 2009 sur une ligne NNE-SSW à travers la marge des Ryukyus. Ces deux expériences combinées permettent d'améliorer notre connaissance de la structure crustale de la marge. Au niveau de l'avant-arc, le socle de l'avant-arc est caractérisé par une extrémité formant un butoir vertical et une base très déformée certainement associée à une importante déformation hors-séquence. En profondeur, la plaque plongeante est certainement affectée par une déchirure qui contrôle la sismicité dans cette région de transition entre la subduction et la collision.
https://tel.archives-ouvertes.fr/tel-00660737

tel-00660737
https://tel.archives-ouvertes.fr/tel-00660737
https://tel.archives-ouvertes.fr/tel-00660737/document
https://tel.archives-ouvertes.fr/tel-00660737/file/Thesis_small.pdf

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
We discuss various methods of regularization of singular differential problems. Their common point is that we use the flexibility of the theories of nonlinear generalized functions for adapting the regularization to the singularity of the problem. We particularly underline the relationship between the generalized solutions and those classical or distribution, when they exist, giving a general result for the case of the regularization of data.
Journal of Mathematical Analysis and applications

hal-01529550
https://hal.univ-antilles.fr/hal-01529550
DOI : 10.1016/j.jmaa.2008.11.077

Éditeur(s) : HAL CCSD
Résumé : International audience
This paper deals with variational inclusions of the form 0 ∈ K − f(x) − g(x) where f is a smooth function from a reflexive Banach space X into a Banach space Y , g is a function from X into Y admitting divided differences and K is a nonempty closed convex cone in the space Y . We show that the previous problem can be solved by a combination of two methods: the Newton and the Secant methods. We show that the order of the semilocal method obtained is equal to (1 + √5)/2. Numerical results are also given to illustrate the convergence at the end of the paper.
Serdica Math. J.

hal-00924150
https://hal.archives-ouvertes.fr/hal-00924150

Éditeur(s) : HAL CCSD Global Science Press
Résumé : International audience
In this paper, the authors present two different time-discretization schemes combined with a finite-volume space discretization for the incompressible Navier-Stokes equations. They show that the collocated space discretization, usually used with a projection method, can also be extended to other time discretizations over previous projection methods, like the splitting methods. The main advantage of this splitting method is that the pressure approximation is truly of second order. In the first and second parts of this article, two different time-discretization schemes are considered with a collocated space discretization and it is explained how the unknown can be correctly coupled. Numerical simulations are presented in the last part. Tests of spatial and time accuracies are made. The numerical results when the Navier-Stokes problem is solved are shown, in the model problem of the driven cavity.
ISSN: 1815-2406

hal-00730191
https://hal.archives-ouvertes.fr/hal-00730191

Éditeur(s) : HAL CCSD Springer Verlag
Résumé : International audience
In this paper, we consider a direct protein transfer process between cells in co-culture. Assuming that cells continually encounter each other, and from some hypotheses on cell-to-cell rules of transfer, we derive discrete and continuous Boltzmann-like integrodifferential equations. The novelty of this model is to take into account multiple transfer rules. This new transfer model is used to fit the experimental data of cell-to-cell protein transfer in breast cancer.
ISSN: 0092-8240

Droits : info:eu-repo/semantics/OpenAccess
hal-01683780
https://hal.univ-antilles.fr/hal-01683780
https://hal.univ-antilles.fr/hal-01683780/document
https://hal.univ-antilles.fr/hal-01683780/file/MNPZF%20Bull%20Math%20Biol%202017.pdf
DOI : 10.1007/s11538-017-0319-9