Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Geochronological studies of samples from continuous crustal sections of fossil intra-oceanic arcs are paramount for determining the precise timing of major processes that took place during the building of an oceanic island-arc crust. In this study, laser ablation ICP-MS U-Pb zircon (and conventional Rb-Sr) analyses pinpoint the timing of major events responsible for crustal growth of the Kohistan paleo-island arc (Northern Pakistan). Inheritance in magmatic rocks is evidence for recycling of intra-arc material and indicates that the Kohistan arc may have formed as early as 135 +/- 4 Ma. One older inherited grain indicates that the arc developed on a young oceanic lithosphere whose remnants include a c. 175 Ma old component. An interesting consequence is that intra-oceanic arc magmas can yield inherited zircons, which can be much older than the arc system itself without requiring recycling back into the mantle by subduction processes. In the case of the Kohistan arc, ante-arc Neotethys oceanic lithosphere was tapped by arc magmas during their way upward into the arc crust. The oldest magmatic ages measured in this study fall in the range 101-102 Ma (100.9 +/- 0.6 and 102.1 +/- 0.4 Ma). This period corresponds to arc build-up and thickening of the arc crust. Leucogranitic melts dated at 89.9 +/- 0.4 Ma and 90.9 +/- 1.0 Ma are considered as produced by dehydration/melting reaction accompanying granulitisation of the thickened lower arc crust. A maximum age for this event is 97.7 +/- 0.7 Ma, the age of emplacement of a garnet meta-tonalite affected by granulite facies metamorphism. Magmatic activity was still ongoing during and after the granulitisation as testified by emplacement of a diorite and a gabbro dated at 89.1 +/- 0.6 and 88.2 +/- 0.9 Ma respectively. The upper part of the metaplutonic sequence contains diorite samples dated at 84.6 +/- 0.5 Ma and 84.3 +/- 0.5 Ma and as young as 81.1 +/- 0.7 Ma. During this period, and based on the present day outcropping sequences, the mean crustal growth rate varied from 32 to 65 km(3)/km/Ma (volume per unit width along the strike of the arc) which is comparable to the range for present day arcs of the Western Pacific region. The correspondence of crustal growth rates observed for present-day island arcs and the good preservation of the crustal section in the Kohistan arc, make this area an exceptional natural laboratory to study arc related processes and to check models of continental crust formation by arc accretion.
ISSN: 0012-821X

hal-00644555
https://hal.archives-ouvertes.fr/hal-00644555
DOI : 10.1016/j.epsl.2011.07.016

Éditeur(s) : HAL CCSD
Résumé : International audience
Selective serotonin reuptake inhibitor medications (SSRIs) are the first lines of treatment for maternal affective disorders, and are prescribed to up to 10% of pregnant women. Concern has been raised about how perinatal exposure to these medications affect offspring neurobehavioral outcomes, particularly those related to social interactions, as recent research has reported conflicting results related to autism spectrum disorder (ASD) risk in children prenatally exposed to SSRIs. Therefore, the aim of this work was to investigate the effects of perinatal exposure to the SSRI fluoxetine on social play behaviors and the hypothalamic pituitary adrenal system, using a model of pre-gestational maternal stress. We also investigated synaptic proteins in the CA2, CA3, and dentate gyrus of the hippocampus, as well as number of immature neurons in the granule cell layer, as both measures of plasticity in the hippocampus have been linked to social behaviors. In pre-adolescent male and female Sprague-Dawley rat offspring, main findings show that perinatal fluoxetine prevents the negative effect of maternal stress on sibling play behavior. However, perinatal fluoxetine increased social aggressive play with a novel conspecific in both sexes and decreased time grooming a novel conspecific in males only. Perinatal fluoxetine also increased serum corticosteroid binding globulin levels, 5-HT levels in the hippocampus, and pre-synaptic density assessed via synaptophysin in the dentate gyrus. Social interaction was significantly correlated with changes in plasticity in the CA2 region of the hippocampus. Pre-gestational maternal stress exposure resulted in significantly decreased rates of hippocampal neurogenesis and synaptophysin density in the dentate gyrus of pre-adolescent males, but not females. Together, these results further characterize the role of perinatal SSRIs, maternal stress prior to conception, and sex/gender on developing social behaviors and related plasticity in the hippocampus of pre-adolescent offspring.
Psychoneuroendocrinology

hal-01579611
https://hal-univ-rennes1.archives-ouvertes.fr/hal-01579611
DOI : 10.1016/j.psyneuen.2017.07.480
PUBMED : 28735226

Éditeur(s) : HAL CCSD Wiley-Blackwell
Résumé : International audience
Here, the first description of an epsilon sulfur-oxidizing bacterium from sulfide-rich sediments of marine mangrove in Caribbean is reported. According to TEM, this new strain contains intracytoplasmic large internal sulfur granules as confirmed by EDXS analyses performed using ESEM. The sulfur distribution obtained for this sulfur-oxidizing bacterial strain allows to conclude that elemental sulfur is formed as an intermediate oxidation product and stored intracellularly. According to conventional SEM observations, bacterial cells are ovoid, extremely motile by lophotrichous flagella. Phylogenetic analyses based on the analysis of partial sequence of 16S rDNA confirm that such bacterial strain belongs to the Thiovulum cluster and could be a representative of a new species in this poorly studied genus of sulfur-oxidizing free-living bacteria. Thus, reduced sediment of marine mangrove represents sulfide-rich environment sustaining development of both gamma and epsilon sulfur-oxidizing Proteobacteria
ISSN: 0378-1097

hal-01682113
https://hal.univ-antilles.fr/hal-01682113
DOI : 10.1093/femsle/fnx172

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
We conducted triaxial compression experiments to investigate the effects of pressure, temperature and strain rate on the rheology of talc rocks. The tests were carried out at T from 25 to 860 degrees C, P from 0.1 to 300 MPa, and <(epsilon) over dot> from 0.3 to 30 x 10-5 s(-1). In addition to being very weak, there are other important differences between the mechanical behavior of talc and that of most other silicates. Deformation at all temperatures up to dehydration was accommodated by a combination of crystal plasticity, frictional sliding, and cataclasis. A transition from localized to distributed deformation occurred at P = 300 MPa and T = 400 degrees C, but this transition is ill-defined as both distributed and localized deformation were observed at P = 300 MPa and T = 600 degrees C. Unlike most silicates, both the coefficient of internal friction and the coefficient of (sliding) friction are very low and nearly equal to each other. Temperature enhances plastic deformation (kinking), and inter- and intra-granular microcracks are observed parallel to the (001) planes at all conditions. Voids are created by delamination along (001) planes at kink-band boundaries. Full crystal plasticity was not achieved under any of the conditions tested, i.e., the von Mises criterion was never satisfied. However, the strength of the aggregates remained much less than the confining pressure. These unusual properties are likely a manifestation of the pronounced mechanical anisotropy of talc at the grain scale. At T >= 750 degrees C dehydration is observed, but only along shear zones. These results suggest that feedbacks between deformation and reaction kinetics could control fluid flow in fault zones. The presence of talc can promote significant weakening and strain localization in the oceanic lithosphere, the subducting plate and the overlying mantle wedge. (c) 2008 Elsevier B.V. All rights reserved.
ISSN: 0012-821X

hal-00492706
https://hal.archives-ouvertes.fr/hal-00492706
DOI : 10.1016/j.epsl.2008.02.004

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
To constrain the relations between deformation and metasomatism in the subcratonic lithospheric mantle, we have analyzed the microstructures and crystal preferred orientations in 50 mantle xenoliths from the Kaapvaal craton. Water contents in olivine and pyroxenes were measured in 14 samples equilibrated at different depths. Coarse-granular microstructures recording deformation by dislocation creep followed by annealing predominate. Mylonitic (sheared) peridotites with partially or totally recrystallized microstructures are however common below 140 km. Refractory compositions predominate, but multiple metasomatic events resulted in orthopyroxene enrichment or secondary crystallization of clinopyroxene and phlogopite. Coherent orthopyroxene and olivine CPO in most coarse-grained peridotites implies in pre- to syn-kinematic orthopyroxene enrichment or epitaxial growth on primary orthopyroxene. Undeformed, interstitial orthopyroxene, clinopyroxene, and phlogopite with random orientations in coarse-grained peridotites record post-kinematic modal metasomatic events. Deformation of these phases in the sheared peridotites implies that mylonitization results from a later event, which affected locally the deep cratonic lithosphere. Olivine CPO recording dominant [100] glide predominate at all depths. Only two samples, equilibrated at ~ 3.3 GPa show olivine [001] and orthopyroxene [001] axes subparallel, suggesting dominant [001] glide. Water contents in olivine are maximum (150 wt. ppm H2O) in peridotites equilibrated at ~ 160 km depth. Peridotites equilibrated below 180 km depth are, in contrast, almost dry. Lack of correlation between olivine mg# and water content indicates that the high water contents in olivine record re-hydration after the extensive partial melting, which produced the cratonic root. The vertical variation in water contents in olivine observed in the Kaapvaal peridotites may result from hydrogen addition or loss during extraction by the kimberlites. Comparison with magnetotelluric electrical conductivity data suggests, however, that the observed vertical variation of water contents in olivine may be representative of the present-day state of the Kaapvaal mantle, implying that extensive metasomatism resulted in hydration of the cratonic mantle at intermediate depths. The annealed microstructures of Kaapvaal peridotites indicate however that this metasomatism was not followed by remobilization of the cratonic root.
ISSN: 0024-4937

hal-00750328
https://hal.archives-ouvertes.fr/hal-00750328
DOI : 10.1016/j.lithos.2012.05.001

Éditeur(s) : HAL CCSD Elsevier
Résumé : Field isolates of Toxoplasma gondii in Europe and North America have been grouped into three clonal lineages that display different virulence in mice. Whether the genetic structure of the parasite is related to clinical expression in humans has not yet been demonstrated. We developed an enzyme-linked immunosorbent assay which uses lineage-specific, polymorphic polypeptides derived from the dense granule antigens, GRA5 and GRA6. Our goal was to compare serotypical patterns observed in asymptomatic versus symptomatic (ocular disease and severe infection in human immunodeficiency virus (HIV)-positive patients) infections among patients from Europe and South America. Independent of the clinical presentation of the disease, serotypes differed according to geographical origin, with a homogeneous distribution of serotype II in Europe and of serotypes I and III in South America. We conclude that GRA5-GRA6 serotyping is an interesting tool to study serotype prevalence in populations but it is not an accurate marker of pathogenicity of Toxoplasma infection in humans.
ISSN: 1286-4579

hal-00306841
https://hal.archives-ouvertes.fr/hal-00306841
DOI : 10.1016/j.micinf.2008.04.001
PUBMED : 18539501

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Tsavorite, the vanadian variety of green grossular, is a high value economic gemstone. It is hosted exclusively in the metasedimentary formations from the Neoproterozoic Metamorphic Mozambique Belt. The deposits are mined in Kenya, Tanzania and Madagascar and other occurrences are located in Pakistan and East Antarctica. They are located within metasomatized graphitic rocks such as graphitic gneiss and calc-silicates, intercalated with meta-evaporites. Tsavorite is found as primary deposits either in nodule (type I) or in quartz vein (type II), and in placers (type III). The primary mineralizations (types I and II) are controlled by lithostratigraphy and/or structure. For the African occurrences, the protoliths of the host-rocks were deposited at the beginning of the Neoproterozoic within a marine coastal sabkha environment, located at the margin of the Congo-Kalahari cratons in the Mozambique Ocean. During the East African-Antarctican Orogeny, the rocks underwent high amphibolite to granulite facies metamorphism and the formation of tsavorite deposits occurred between 650 and 550 Ma. The nodules of tsavorite were formed during prograde metamorphism, calcium coming from sulphates and carbonates, whereas alumina, silicates, vanadium and chromium probably came from clays and chlorite. The veins were formed during the deformation of the metasedimentary platform units which experienced shearing, leading to the formation of fault-filled veins. Metasomatism developed during retrograde metamorphism. The metasedimentary sequences are characterized by the presence of evaporitic minerals such as gypsum and anhydrite, and scapolite. Evaporites are essential as they provide calcium and permit the mobilization of all the chemical elements for tsavorite formation. The H2S-S8 metamorphic fluids characterized in primary fluid inclusions of tsavorites and the δ11B values of coeval dravite confirm the evaporitic origin of the fluids. The V2O3 and Cr2O3 contents of tsavorite range respectively from 0.05 to 7.5 wt.%, while their δ18O values are in the range of 9.5-21.1‰. The genetic model proposed for tsavorite is metamorphic, based on chemical reactions developed between an initial assemblage composed of gypsum and anhydrite, carbonates and organic matter deposited in a sabkha-like sedimentary basin.
ISSN: 0169-1368

hal-00853279
https://hal.archives-ouvertes.fr/hal-00853279
DOI : 10.1016/j.oregeorev.2013.01.016

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The subcontinental lithospheric mantle evolves through time due to tectonic events and processes as static recrystallization and melt percolation. To constrain the extent of these processes in the South Patagonian subcontinental mantle lithosphere we performed a microstructural and Electron Backscattered Diffraction (EBSD) study of a suite of 35 peridotite xenoliths brought to the surface by Plio-Pleistocene alkaline volcanic rocks from Gobernador Gregores and Pali Aike. All samples show a well-developed olivine and pyroxene crystallographic preferred orientation (CPO), consistent with deformation by dislocation creep with dominant activation of [100]{0kl} in olivine. The coarse granular or tabular textures and the low density of intracrystalline deformation features indicate that deformation was followed by annealing under static conditions. The xenoliths also show microstructural evidence of multiple episodes of reactive melt percolation. Neither annealing nor melt percolation erased the olivine CPO, which has [010]-fiber, [100]-fiber and orthorhombic patterns in Pali Aike xenoliths and essentially [010]-fiber and orthorhombic patterns in Gobernador Gregores xenoliths. Seismic properties calculated based on the CPO and modal compositions are, however, rather homogeneous, with fast S-wave polarization and P-wave propagation parallel to the [100] olivine axis. The variation in the olivine CPO solely changes the minimum S-wave birefringence direction, which is normal to the foliation for axial-[010] olivine CPO. Average samples for the two localities, obtained by adding up the individual samples CPO data in a common reference frame, show, however, a 'normal' upper mantle anisotropy with a maximum S-wave birrenfringence of ca. 5% at high angle to the both the maximum [010] and [100] axes concentrations, that is in the foliation, but normal to the lineation, and a minimum birefringence at low angle to the [100] maximum, that is parallel to the lineation.
ISSN: 0040-1951

hal-01053500
https://hal.archives-ouvertes.fr/hal-01053500
DOI : 10.1016/j.tecto.2014.02.017

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The basement of central Madagascar displays two contrasted structural patterns. The first one (D1) is characterized by north-striking foliations that are gently dipping to the west and carry W- to WSW-plunging lineations, whereas the second one (D2) is characterized by steeper foliations that are striking to the NNE and lineations that are either subhorizontal or gently plunging to the SSW. The younger pattern is related to late-Panafrican tectonics along the major Angavo shear zone that is about 1000 km in length and 40 km in width with apparently little offset. Deformation in the Angavo zone induced interference folding on both sides. The D2 event is characterized by low pressures (ca 400 MPa) and high temperatures (up to 790 degrees C) responsible for prograde granulite facies conditions, that resulted from heat transfer due to magma and fluid advection in the Angavo shear zone. The D2 event is pinned at 550 +/- 11 Ma by a new monazite age from a reoriented Andringitrean granite near Ankaramena. A new suite of amphibole and biotite Ar-Ar geochronological data enables to retrace the thermochronogical evolution inside and outside the Angavo shear zone. Combined with new structural results from the western interference zone. these ages yield a better understanding of the late-Panafrican history of central Madagascar. No diachronism is observed along the strike of the Angavo shear zone. Conversely, amphibole and especially biotite ages decrease from West to East, i.e. towards the shear zone. These new ages range from 511 to 469 Ma. A 1-D conductive model constrains the thermal effect in relation with the Angavo shear zone to be restricted to a lateral distance of ca 60 km (in map view) for a maximum heating duration of 20 Myr. This is in agreement with the Ar-Ar data and with the width of the observed interference zone. Following this episode of deformation and heat transfer, the estimated cooling rates of the Angavo shear zone range from to 15 to 6 degrees C/Myr, respectively before and after 515 Ma. A post-collision intracontinental setting is suggested for the Angavo shear zone, which is regarded as a remote effect of the Kuunga Orogeny between India and Antarctica.
ISSN: 0040-1951

hal-00463507
https://hal.archives-ouvertes.fr/hal-00463507
DOI : 10.1016/j.tecto.2009.03.009

Éditeur(s) : HAL CCSD Wiley-Blackwell
Résumé : International audience
The shallow-water bivalve Codakia orbiculata which harbors gill-endosymbiotic sulfur-oxidizing g-proteobacteria can lose and acquire its endosymbionts throughout its life. Longterm starvation and recolonization experiments led to changes in the organization of cells in the lateral zone of gill filaments. This plasticity is linked to the presence or absence of gill-endosymbionts. Herein, we propose that this reorganization can be explained by three hypotheses: (a) a variation in the number of bacteriocytes and granule cells due to proliferation or apoptosis processes, (b) a variation of the volume of these two cell types without modification in the number, and (c) a combination of both number and cell volume variation. To test these hypotheses, we analyzed cell reorganization in terms of proliferation and apoptosis in adults submitted to starvation and returned to the field using catalyzed reporter deposition fluorescence in situ hybridization, immunohistochemistry, and structural analyses. We observed that cell and tissue reorganization in gills filaments is due to a variation in cell relative abundance that maybe associated with a variation in cell apparent volume and depends on the environment. In fact, bacteriocytes mostly multiply in freshly collected and newly recolonized individuals, and excess bacteriocytes are eliminated in later recolonization stages. We highlight that host tissue regeneration in gill filaments of this symbiotic bivalve can occur by both replication of existing cells and division of undifferentiated cells localized in tissular bridges, which might be a tissue-specific multipotent stem cell zone.
Microscopy Research and Technique

hal-00743036
https://hal-uag.archives-ouvertes.fr/hal-00743036

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Microstructures, U-Pb SHRIMP zircon ages and temperature estimates were used to constrain the fabric evolution and timing of mylonitisation in the Patos shear zone (NE Brazil). Melt-bearing HT-mylonitic orthogneiss displays solid-state fabrics with coarse quartz ribbons and sutured grain boundaries. K-feldspar is often fractured and shows peripheral myrmekite. The textures typically become magmatic at the contacts with the Espinho Branco anatexite. Zircon crystals from two samples of the leucosome show Paleoproterozoic (ca. 2.2 Ga) inherited cores that are enveloped by recrystallised Neoproterozoic rims. These zircon grains define a discordia with lower intercept ages of 558 and 562 Ma but with large analytical errors. A leucogranite with transitional contacts with host diatexites provides a well-constrained zircon mean age of 566 ± 6 Ma (n = 15, 95% conf.), which is considered the best estimate for the peak metamorphic conditions. The transition from HT-mylonites to fine-grained mylonites and ultramylonites is marked by a progressive grain size reduction assisted by recrystallisation. Quartz crystallographic fabrics display [0 0 0 1] concentrations between Z and Y. K-feldspar and plagioclase fabrics record the activity of the (0 1 0)[0 0 1] and (0 1 0)[1 0 0] slip systems and, in the lower-temperature tectonites, the (1 0 0)[0 1 0] slip system. These results suggest a diachronic evolution in which an initial HT northern domain was deformed by intracrystalline slip and melt-assisted granular flow, followed by medium- to low-temperature solid-state creep in the southern shear zone domain. The mylonites therefore record the rheological heterogeneities responsible for the formation of a late continental shear zone that nucleated under partially molten conditions and was later reactivated through melt-absent strain localization following exhumation.
ISSN: 0301-9268

hal-01053497
https://hal.archives-ouvertes.fr/hal-01053497
DOI : 10.1016/j.precamres.2013.12.020

Éditeur(s) : HAL CCSD Public Library of Science
Résumé : International audience
BackgroundSince the discovery of thioautotrophic bacterial symbiosis in the giant tubeworm Riftia pachyptila, there has been great impetus to investigate such partnerships in other invertebrates. In this study, we present the occurrence of a sulphur-oxidizing symbiosis in a metazoan belonging to the phylum Cnidaria in which this event has never been described previously.Methodology/Principal FindingsScanning Electron Microscope (SEM), Transmission Electron Microscope (TEM) observations and Energy-dispersive X-ray spectroscopy (EDXs) analysis, were employed to unveil the presence of prokaryotes population bearing elemental sulphur granules, growing on the body surface of the metazoan. Phylogenetic assessments were also undertaken to identify this invertebrate and microorganisms in thiotrophic symbiosis. Our results showed the occurrence of a thiotrophic symbiosis in a cnidarian identified as Cladonema sp.Conclusions/SignificanceThis is the first report describing the occurrence of a sulphur-oxidizing symbiosis in a cnidarian. Furthermore, of the two adult morphologies, the polyp and medusa, this mutualistic association was found restricted to the polyp form of Cladonema sp.
ISSN: 1932-6203

hal-01203244
https://hal.univ-antilles.fr/hal-01203244
https://hal.univ-antilles.fr/hal-01203244/document
https://hal.univ-antilles.fr/hal-01203244/file/Plos%20Cladonema%20%281%29.pdf
https://hal.univ-antilles.fr/hal-01203244/file/Plos%20Cladonema.pdf

Résumé : Les résultats de cette étude de la composition du fruit à pain récolté sur un territoire contrasté du point de vue agropédoclimatique, et de son amidon, montrent que la teneur en amidon du fruit à pain apparaît comme étant influencée par la saison, mais pas par la zone de récolte. La teneur en amidon beaucoup plus élevée pour les fruits à pain développés durant la saison la plus sèche est un résultat très original. La connaissance du cycle de développement des fruits à pain à la Martinique a été décrite pour une première fois, permettant de déterminer une période de récolte optimisée par rapport à la floraison : la 16ème semaine pour une croissance maximale, ou la 17ème semaine pour une plus haute teneur en amidon. L’étude de Worrell et al., (1998), la seule publiée actuellement, menée à la Barbade, a montré un cycle plus long de 2 semaines environ.Du point de vue de la diversité génétique, les fruits à pain récoltés en Martinique constituent un seul groupe, à l’opposé de ceux récoltés en Guadeloupe qui constituent 2 sous-groupes proches.En ce qui concerne l’amidon, nos résultats montrent que les dimensions des grains d’amidon de fruits matures sont comprises entre 9 et 12 µm. Leur taille augmente avec la croissance du fruit puisque dans un fruit immature leur diamètre moyen était de 7,5 µm. Il s’agit d’amidons de type B à très haute cristallinité, dont les températures d'empesage sont autour de 75 °C. Parmi les facteurs agropédoclimatiques, l’humidité a eu un rôle actif sur la qualité de l’amidon puisque à la fois la quantité d’amylose et la masse molaire de l’amylopectine diminuent. L’amidon a une solubilité et un gonflement faible du même ordre de grandeur que les amidons classiques et une forte viscosité à la gélatinisation et à la rétrogradation, lui conférant une aptitude à l’utilisation comme gélifiant.Des essais d’applications alimentaires ont été effectués en panification et en extrusion. Des transformations en produits de type crackers ont donné des résultats moyennement satisfaisant avec 100 % de farine de fruit à pain. En panification l’incorporation de farine de fruit à pain a des actions délétères sur la valeur boulangère. L’acceptabilité d’un goût « nature, vert » conféré par la farine de fruit à pain devra notamment être évaluée lors de travaux ultérieurs.Le développement de produits à base de fruit à pain permettra
The results of this study the composition of breadfruit harvested in an area of agro climatic soil contrasting views, and its starch, show that the starch content of breadfruit appears to be influenced by season, but not by collection area. The starch content is much higher for breadfruit developed during the driest season is a very original result. Knowledge of the development cycle of breadfruit in Martinique has been described for the first time, to determine an optimal harvest period compared to flower: the 16th week for maximum growth, or the 17th week for a higher starch content. The study by Worrell et al., (1998), the only currently published, conducted in Barbados, showed a longer cycle of about 2 weeks.From the perspective of genetic diversity, breadfruit harvested in Martinique as a single group, in contrast to those collected in Guadeloupe that are close to two subgroups.With regard to starch, our results show that the size of starch granules of mature fruits are between 9 and 12 microns. Their size increases with the growth of the fruit as an immature fruit in their mean diameter was 7.5 microns. This is B-type starches with very high crystallinity, with temperatures of gelatinization are around 75 °C. Agro climatic soil factors, humidity took an active role on the quality of starch, since both the amount of amylose and amylopectin molecular weight of the decline. The starch has a solubility and low swelling of the same order of magnitude as the conventional starches and high viscosity to gelatinization and retrogradation, giving it a suitability for use as a gelling agent.Testing of food applications were made in bakery and extrusion. Changes in products like crackers gave moderately satisfactory results with 100 % breadfruit flour. Incorporation into bread flour breadfruit has deleterious actions on the baking. The acceptability of a taste "nature green" conferred by the breadfruit flour will be particularly assessed in future work.Product development based breadfruit allow several things, which meet the growing demand for food diversification.

http://www.theses.fr/2012AGUY0517/document

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The analysis of three cataclastic band sets from Provence (France) reveals that the band density, their conjugate angles, their ratio of shear displacement to compaction, and the amount of cataclasis within the bands differ and can be expressed as functions of tectonic setting and petrophysical properties. We identify (1) a dense and closely spaced network of shear-enhanced (reverse) compaction bands; (2) a regularly spaced less dense network of reverse compactional shear bands; and (3) a localized network of normal shear bands. The field data show that strain localization is favored in an extensional regime and is characterized by shear bands with a large shear to compaction ratio and a small conjugate band angle. In contrast, distributed strain is favored in a contractional regime and is characterized by compactional bands with a low ratio of shear to compaction and a large conjugate band angle. To explain the mechanical origin of this strain localization, we quantify the yield strength and the stress evolution in extensional and contractional regimes in a frictional porous granular material. We propose a model of strain localization in porous sands as a function of tectonic stresses, burial depth, material properties, strain hardening and fluid pressure. Our model suggests that stress reduction, inherent to extensional regime, favors strain localization as shear bands, whereas stress increase during contraction favors development of compactional bands.
ISSN: 0191-8141

hal-00856921
https://hal.archives-ouvertes.fr/hal-00856921
DOI : 10.1016/j.jsg.2012.11.011

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
We present Contact Dynamics discrete element simulations of the earthquake-triggered Jiufengershan avalanche, which mobilized a 60 m thick, 1.5 km long sedimentary layer, dipping similar to 22 degrees SE toward a valley. The dynamic behavior of the avalanche is simulated under different assumptions about rock behavior, water table height, and boundary shear strength. Additionally, seismic shaking is introduced using strong motion records from nearby stations. We assume that seismic shaking generates shearing and frictional heating along the surface of rupture, which, in turn, may induce dynamic weakening and avalanche triggering; a simple "slip-weakening'' criterion was adopted to simulate shear strength drop along the rupture surface. We investigate the mechanical processes occurring during triggering and propagation of an avalanche mobilizing shallowly dipping layers. Incipient deformation forms a pop-up structure at the toe of the dip slope. As the avalanche propagates, the pop-up deforms into an overturned fold, which overrides the surface of separation along a decollement. Simultaneously, uphill layers slide at high velocity (125 km/h) and are folded and disrupted as they reach the toe of the dip slope. The avalanche foot forms a wedge that is pushed forward as deformed rocks accrete at its rear. We simulated five cross sections across the Jiufengershan avalanche, which differ in the geometry of the surface of separation. Topographic and simulated surface profiles are similar. The friction coefficient at the surface of separation determined from back analysis is abnormally low (mu(SS) = 0.2), possibly due to lubrication by liquefied soils. The granular deposits of simulated earthquake- and rain-triggered avalanches are similar.
ISSN: 0148-0227

hal-00420882
https://hal.archives-ouvertes.fr/hal-00420882
DOI : 10.1029/2008JF001075

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Carbonation of peridotite is a widespread process in nature, with emerging societal and environmental implications through geological storage of CO2. We studied the micro- and nano-scale structures associated with the carbonation of peridotite pervaded by a CO2-rich water and the induced changes of its hydrodynamic properties. Focused ion beam (FIB) nanotomography was coupled with scanning electron microscopy (SEM) and transmission electron microscopy (TEM) observations. An experimental sample of dunite core percolated by a CO2-rich fluid (pCO2 = 11 MPa) at 160 °C was compared with a naturally carbonated sample from the Atlantic Ridge (Exp. IODP 304). Results of the 8-days percolation experiment show continuous alteration of olivine into magnesite locally associated with a poorly crystalline serpentine-type mineral referred to as proto-serpentine. The experiment is also characterized by an overall decrease in rock porosity (from 7.7 to 6.4%) and permeability (from 8.5 × 10− 16 to 1.7 × 10− 16 m2). The primary inter-granular porosity (1 to 10 μm) is progressively filled with magnesite, leading to the overall decrease of permeability. At the same time, a secondary small-scale porosity (10 nm to 1 μm) is created at the tip of the dissolution features along the (010) cleavage planes of olivine grains. Carbonate crystals grow within these etch-pit structures behind the dissolution front. Dissolution and precipitation occur at a relative rate that maintains the secondary porosity over the timescale of the experiment (i.e. carbonate growth has to be the slowest one). This process is interpreted as an interface coupled dissolution-precipitation mechanism of olivine carbonation. Proto-serpentine is only formed in highly reduced flow areas, such as small olivine etch-pits (10 to 500 nm wide), which are more isolated from CO2 input. SEM-FIB analyses show the 3D preferential orientation of the dissolution-precipitation planes within a given olivine grain. It suggests the formation of lateral connections between the etch-pits (infra-micrometric “channels”) providing access to reactants and removing reaction products at the reaction sites. The experimental results show that olivine dissolution and magnesite precipitation converge to a quasi-steady state resulting in a constant carbonation rate controlled by reaction kinetics and not by mass transfer for this flow regime. The system self-regulates, independently of the porosity change at least during this incipient stage of olivine carbonation. Similar textures are observed in natural samples collected at 170 m-depth in the vicinity of veinlets driving late fluids down into the cooling oceanic lithosphere. This suggests that similar mechanisms are active in nature and can play an important role in the late, low temperature alteration stages of fractured peridotite. These results also highlight the critical role of nm-scale spatial arrangement of dissolution and precipitation features on mass transfers and on the sustainability of olivine carbonation through coupled dissolution-precipitation processes.
ISSN: 0009-2541

hal-01684733
https://hal.archives-ouvertes.fr/hal-01684733
DOI : 10.1016/j.chemgeo.2017.11.013

Éditeur(s) : HAL CCSD
Résumé : International audience
At the time of the collision with India (55Ma), the southern margin of Asia was a composite continental domainresulting from an already long history of successive accretions of different terranes having different rheologies.Knowledge about the structure, composition and thermal state of the Tibetan lithosphere through time is thusfundamental to understand the respective contributions of pre-Cenozoïc and Cenozoïc tectonics in the building ofthe Plateau to its present-day elevations.We focused on the boundary between the Qiangtang terrane to the south, and the Songpan-Ganze terrane to thenorth.We jointly studied deep crustal xenoliths and associated (ultra-)potassic magmatism from the Eocene basinsof Nangqian and Xialaxiu (Qinghai Province, China), north of the Qiangtang terrane. The aims were to retrievethe composition and the thermal state of the lower crust during Eocene times, to study the behavior of the lowercrust and lithospheric mantle of the Eastern Qiangtang terrane and the adjacent Songpan-Ganze terrane at the timeof the collision, and the link with the magmatic activity.Crustal xenoliths are of two types: biotite-rich, amphibole bearing metasediments; and garnet-bearing quartzofeldspathicgneisses. Such assemblages are typical of very high-grade amphibolite and granulite faciesmetamorphism; further study should allow us to quantify the pressures and temperatures those rocks experienceduntil the time they were sampled by their host lavas.Major element geochemistry places the c.a. 51-49 Ma (Spurlin et al., 2005) Xialaxiu volcanic field in a fairlydifferentiated (SiO265-70 wt%) high-K field of the calc-alcaline series. Trace element analysis suggests a strongcrustal contamination of the primary mantellic melts. C.a. 38-37 Ma (Spurlin et al., 2005) Nangqian magmaticbodies span across the alkaline series, with high to extreme (K2O6wt%) values. Complex major and traceelement patterns, coupled with high-resolution microprobe data on pyroxene xenocrysts, suggest that enrichmentoccurred at the source by metasomatism of the lithospheric mantle.Further work will precise which mechanisms could have accounted for such a metasomatism of the mantle beneaththe Northern Qiangtang terrane during Eocene, and whether the lower crust had an autochtonous or allochtonousnature.
Geophysical Research Abstracts
Vienne, Austria

insu-01308919
https://hal-insu.archives-ouvertes.fr/insu-01308919

Résumé : L’objet de cette thèse est l’étude des comportements mécanique et à la corrosion d’un nouveau système de fondation, dit pieux SPIRMEC, adapté aux structures légères. Le travail s’est focalisé sur deux grands aspects. Le premier aspect concerne l’analyse du comportement sous chargement axiale des pieux SPIRMEC sur la base de l’expérimentation et de la modélisation numérique dans un sol mou non cohésif. Quant au deuxième aspect, il traite du problème de la corrosion de l’acier constituant le pieu dans un environnement tropical humide. Le comportement des pieux SPIRMEC sous une charge axiale de traction, dans un sol fin non cohésif, a montré le développement d’une surface cylindrique de rupture. Celle-ci ne dépend pas de la configuration géométrique des pieux tel que : l’espacement S, le diamètre d’hélice Dh et le diamètre du tube d. En adoptant ce critère de rupture et à l’aide d’une analyse statistique des données, nous avons proposé quatre méthodes analytiques de prédiction de la capacité portante des pieux SPIRMEC à partir des essais in-situ et au laboratoire qui sont: •Méthode CPT basée sur la résistance de pointe pénétromètrique (essai CPT), •Méthode MPT basée sur la pression limite pressiomètrique (essai MPT), •Méthode du couple d’installation, •Méthode analytique basée sur les paramètres de cisaillement de sol notamment l’angle de frottement interne (essais triaxial et boîte de cisaillement). Ces méthodes tiennent compte de la géométrie du pieu, du procédé de mise en oeuvre et de la compacité du sol. L’analyse de performance des méthodes proposées a montré que les méthodes analytique et CPT représentent mieux le comportement des pieux testés. La modélisation numérique du comportement des pieux SPIRMEC sous charge axiale de traction a été également étudiée à l’aide du code de calcul Plaxis 2D. Un modèle axisymétrique a été adopté pour modéliser la géométrie de la structure. Le modèle de comportement hardening soil a été retenu pour modéliser le comportement élastoplastiq des couches de sol. Un modèle élastique linéaire a été retenu pour le pieu. Quant au comportement de l’interface sol-structure, il a été pris en compte par un modèle élastoplastique basé sur les critères de Mohr-Coulomb. L’expansion du sol résultant de l’installation des pieux a été approchée par une cavité cylindrique. Cette dernière a été modélisée par des déformations volumiques anisotropes. Nous avons constaté, qu’appliquer une déformation volumique de l’ordre de 40% permet une bonne concordance entre les résultats numériques et expérimentaux. L’étude paramétrique nous a également permis de constater l’existence d’une variation linéaire entre la capacité portante et l’espacement S. Le comportement de l’acier galvanisé dans le sol a été également étudié au moyen de trois approches: électrochimique, visuelles grâce au microscope électronique et gravimétrique. Les tests électrochimiques de corrosion du zinc ont été réalisés dans la solution de sol artificielle pour deux périodes bien distinctes : saison des pluies et après 8 mois de contact sol-pieu. Une forte dépendance est constatée de la vitesse de corrosion de zinc au pH et à la conductivité de la solution. La vitesse de corrosion est plus importante en saison des pluies qu’après 8 mois de contact de pieu avec le sol. Les fortes concentrations en sulfates semblent augmenter la vitesse de corrosion. Les analyses menées au MEB montrent que la zone de fluctuation de nappe et en surface externe (sol/air) sont les zones les plus corrodées. La comparaison entre les différentes techniques d’évaluation de la vitesse de corrosion a montré que l’eau de nappe peut être utilisée comme un milieu représentatif du profil chimique d’un sol non cohésif et légèrement granulaire.
The purpose of this thesis is to study the both behaviors mechanical and of the corrosion of a new foundation system, called spirec piles, for lightweight structures. The work was based on two main aspects. The first aspect concerns the analysis of behavior of the spirmec piles under axial loading on the basis of experimental and numerical modeling in a non-cohesive soft soil. On the second aspect, it addresses the problem of corrosion of steel forming the pile in a humid tropical environment. The behavior of the tested piles under axial traction load, in a non-cohesive soil, showed the development of a cylindrical surface of failure. This does not depend on the geometrical configuration of the tested piles such that: the spacing s, the helix diameter dh and the diameter of the shaft. By adopting this failure criterion and using statistical data analysis, we proposed four analytical methods for predicting the bearing capacity of the piles from in-situ and laboratory tests, which are: cpt method based on tip resistance penetrometer (cpt test), mpt method based on pressuremeter limit pressure (test mpt), method of installation torque and analytical method based on the shear parameters of soil (triaxial tests and shear box). These methods take into account the geometry of the pile, the method and implementation of soil compaction. Performance analysis of the proposed methods showed that the analytical methods and cpt represent better the behavior of piles tested. An axisymmetric condition was assumed to model this geometry in two-dimensional space. In this study, we proposed to model the pipe screw pile with plates elements available in plaxis 2d. The helixes were modeled as circular disks. Interface elements were incorporated along the pile to simulate the soil-pile interaction. Hardening soil model was chosen to describe the soil with drained behavior was assigned for all layers. Linear elastic for pile and elastic plastic model based on the mohr-coulomb criterion was used to describe the interface behavior. The lateral expansion generated by the pile shaft was modeled by anisotropic volumetric strains (ɛxx=ɛzz, ɛyy=0). The pile behavior under tensile loading at different volumetric strains, it is clear that the best fit was obtained at volumetric strain of 40%. The parametric study also allowed us to establish the existence of a linear variation between the bearing capacity and spacings. The behavior of the galvanized steel in the ground has also been studied using three approaches such as: electrochemical, microscopic imaging and gravimetrically. Electrochemical tests of the corrosion of the zinc have been made in artificial soil solution into two periods, the rainy season and after eight months of contact soil-pile. Is a strong dependence of the observed corrosion rate of the zinc at the ph and conductivity of the solution. The corrosion rate is higher in the rainy season compared to eight months of contact of the pile with soil. High sulfate concentrations increase the rate of corrosion. The meb analysis shows that the fluctuation zone of the water table is the most corroded area. Comparison between the different methods of evaluating the corrosion rate showed that the ground water may be used as a representative profile of the chemical environment of a non-cohesive soil and slightly granular.

http://www.theses.fr/2014AGUY0790/document