Éditeur(s) : HAL CCSD Geological Society of America
Résumé : International audience
In this study, a novel application of a statistical approach is utilized for analysis of downhole logging data from Miocene-aged siliciclastic shelf sediments on the New Jersey Margin (eastern USA). A multivariate iterative nonhierarchical cluster analysis (INCA) of spectral gamma-ray logs from Integrated Ocean Drilling Program (IODP) Expedition 313 enables lithology within this siliciclastic succession to be inferred and, through comparison with the 1311 m of recovered core, a continuous assessment of depositional sequences is constructed. Signifi cant changes in INCA clusters corroborate most key stratigraphic surfaces interpreted from the core, and this result has particular value for surface recognition in intervals of poor core recovery. This analysis contributes to the evaluation of sequence stratigraphic models of large-scale clinoform complexes that predict depositional environments, sediment composition, and stratal geometries in response to sea-level changes. The novel approach of combining statistical analysis with detailed lithostratigraphic and seismic refl ection data sets will be of interest to any scientists working with downhole logs, especially spectral gamma-ray data, and also provides a reference for the strengths and weaknesses of multi component analysis applied to continental margin lithofacies. The method presented here is appropriate for evaluating successions elsewhere and also has value for hydrocarbon exploration where sequence stratigraphy is a fundamental tool.
EISSN: 1553-040X

insu-00858238
https://hal-insu.archives-ouvertes.fr/insu-00858238
DOI : 10.1130/GES00913.1

Éditeur(s) : HAL CCSD Springer Verlag
Résumé : International audience
The New Jersey continental shelf extends 150 km off the shoreline. During IODP Expedition 313, siliciclastic deposits of late Eocene to late Pleistocene age were drilled down to 631, 669 and 755 m below seafloor at sites 27A, 28A and 29A respectively in very shallow waters (33.5 to 36 m depth). Pore water salinities display multilayered brackish-salty-brine units 10 to 170 m thick, where low-salinity water is preferentially stored in fine-grained sediments. The sharp boundaries of these buried aquifers are often marked by cemented layers a few centimetres thick. The mineralogy and scanning electron microscope observations of these layers show two phases of cementation by authigenic minerals: (1) the early carbonate cement is frequently associated with pyrite, and (2) the late silicate cement infills the residual porosity. The isotopic compositions of the carbonate cements vary widely: −2.4 < δ¹⁸O ‰ VPDB < +2.8; −15.1 < δ¹³C ‰ VPDB < +15.6. The δ¹⁸O values indicate that the carbonate cements precipitated with pore waters comprising variable mixtures of seawater and ¹⁸O-depleted fresh water originating from submarine groundwater discharge. The δ¹³C values of the carbonate cements are related to organic matter diagenesis, providing ¹³C-depleted dissolved inorganic carbon during bacterial sulphate reduction and anaerobic oxidation of methane, and ¹³C-rich dissolved inorganic carbon during methanogenesis. The diagenetic cementation processes included chemical weathering of reactive silicate minerals by the CO²-rich pore waters issued from organic matter diagenesis that released bicarbonate, cations and dissolved silica, which were further precipitated as carbonate and silicate cements. The estimated range of temperature (18±4 °C) during carbonate precipitation is consistent with carbonate cementation at moderate burial depths; however, silicate cementation occurred later during diagenesis at deeper burial depths.
ISSN: 0276-0460

hal-01559985
https://hal.archives-ouvertes.fr/hal-01559985
DOI : 10.1007/s00367-017-0506-6

Éditeur(s) : HAL CCSD Integrated Ocean Drilling Program
Résumé : This contribution is a compilation of electron microprobe analyses of primary minerals in mafic and ultramafic oceanic crustal rocks from Atlantis Massif. The samples were recovered during Integrated Ocean Drilling Program Expedition 304/305, which was designed to investigate the formation and evolution of oceanic core complexes. The analyses were performed at five different institutions, and while common standard reference materials were not utilized at all institutions, internal standards and routine operational protocols were undertaken to assure analysis quality. More than 5000 analyses of plagioclase, pyroxene, olivine, and spinel are compiled here as a collaborative effort to provide mineral analyses to the expedition shipboard science party and other interested researchers.
ISSN: 1930-1014

hal-00464225
https://hal.archives-ouvertes.fr/hal-00464225
DOI : 10.2204/iodp.proc.304305.202.2009

Éditeur(s) : HAL CCSD Oceanography Society
Résumé : In April 1961, 13.5 m of basalts were drilled off Guadalupe Island about 240 km west of Mexico's Baja California, together with a few hundred meters of Miocene sediments, in about 3500 m of water. This fi rst-time exploit, reported by John Steinbeck for Life magazine, aimed to be the test phase for the considerably more ambitious Mohole project, whose objective was to drill through the oceanic crust down to Earth's mantle (Lill and Bascom, 1959; Bascom, 1961). Born in the late 1950s, the Mohole project unfortunately ended in muddy waters and was terminated by the United States Congress in 1965 (Shor, 1985; Greenberg, 1971). Undeterred, the scientifi c community rallied again to launch the Deep Sea Drilling Project (DSDP) in 1968, followed by the Ocean Drilling Program (ODP) in 1985, and the Integrated Ocean Drilling Program (IODP) in 2003. These programs have provided solutions to some of the most pressing and interesting problems in ocean and earth science (see, for example, Oceanography 19-4, December 2006).the early 1970s, almost 15 years after the fi rst Mohole attempt, attendees of a Penrose fi eld conference (Conference Participants, 1972) formulated the concept of a layered oceanic crust composed of lavas, underlain by sheeted dikes, then gabbros (corresponding to the seismic layers 2A, 2B, and 3, respectively), which themselves overlay mantle peridotites. Deep drilling into the oceanic crust would provide the ground truth for the Penrose model; the fl ame of the Mohole project still burned. This article draws from results of more than 30 years of ocean drilling at mid-ocean ridges or in older igneous oceanic crust and briefl y reviews some important milestones that improved understanding of crustalaccretion processes at mid-ocean ridges. Figure 1 shows the locations of the numerous DSDP, ODP, and IODP expeditions to which we refer; Table 1 lists site locations.
ISSN: 1042-8275

hal-00407192
https://hal.archives-ouvertes.fr/hal-00407192

Éditeur(s) : HAL CCSD Geological Society of America
Résumé : IODP Expedition 304/305 Science Party 2007
International audience
ISSN: 0091-7613

hal-00362351
https://hal.archives-ouvertes.fr/hal-00362351
DOI : 10.1130/G23531A.1

Éditeur(s) : HAL CCSD Oxford University Press (OUP)
Résumé : International audience
IODP Expedition 324 cored igneous rocks from Shatsky Rise, an oceanic plateau in the northwest Pacific Ocean that formed mainly during late Jurassic and Early Cretaceous times. We selected 60 samples from 3 different holes for Thellier-Thellier palaeointensity determinations. Induced and remanent magnetization curves measured at low- and high-temperature suggest a diverse and complex magnetic mineralogy, with large variations in Ti content and oxidation state. Hysteresis and FORC measurements show that most samples contain singledomain magnetic grains. After carrying out the palaeointensity determinations, only 9 samples satisfied all reliability criteria. These gave palaeointensity values between 16.5 and 21.5 μT, which correspond to average VDM values of (4.9 ± 0.2) × 1022 Am2 for an estimated age of 140-142 Ma. This value is lower than that for the recent field, which agrees with the hypothesis of a Mesozoic Dipole Low.
ISSN: 0956-540X

hal-00795491
https://hal.archives-ouvertes.fr/hal-00795491
DOI : 10.1093/gji/ggs100

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
IODP Hole U1309D (Atlantis Massif, Mid-Atlantic Ridge 30 degrees N) is the second deepest hole drilled into slow spread gabbroic lithosphere. It comprises 5.4% of olivine-rich troctolites (->70% olivine), possibly the most primitive gabbroic rocks ever drilled at mid-ocean ridges. We present the result of an in situ trace element study carried out on a series of olivine-rich troctolites, and neighbouring troctolites and gabbros, from olivine-rich intervals in Hole U1309D. Olivine-rich troctolites display poilkilitic textures; coarse-grained subhedral to medium-grained rounded olivine crystals are included into large undeformed clinopyroxene and plagioclase poikiloblasts. In contrast, gabbros and troctolites have irregularly seriate textures, with highly variable grain sizes, and locally poikilitic clinopyroxene oikocrysts in troctolites. Clinopyroxene is high Mg# augite (Mg# 87 in olivine-rich troctolites to 82 in gabbros), and plagioclase has anorthite contents ranging from 77 in olivine-rich troctolites to 68 in gabbros. Olivine has high forsterite contents (82-88 in olivine-rich troctolites, to 78-83 in gabbros) and is in Mg-Fe equilibrium with clinopyroxene. Clinopyroxene cores and plagioclase are depleted in trace elements (e.g., Yb-cpx similar to 5-11 x Chondrite), they are in equilibrium with the same MORB-type melt in all studied rock-types. These compositions are not consistent with the progressively more trace element enriched (evolved) compositions expected from olivine rich primitive products to gabbros in a MORB cumulate sequence. They indicate that clinopyroxene and plagioclase crystallized concurrently, after melts having the same trace element composition, consistent with crystallization in an open system with a buffered magma composition. The slight trace element enrichments and lower Cr contents observed in clinopyroxene rims and interstitial grains results from crystallization of late-stage differentiated melts, probably indicating the closure of the magmatic system. In contrast to clinopyroxene and plagioclase, olivine is not in equilibrium with MORB, but with a highly fractionated depleted melt, similar to that in equilibrium with refractory oceanic peridotites, thus possibly indicating a mantle origin. In addition, textural relationships suggest that olivine was in part assimilated by the basaltic melts after which clinopyroxene and plagioclase crystallized (impregnation). These observations suggest a complex crystallization history in an open system involving impregnation by MORB-type melt(s) of an olivine-rich rock or mush. The documented magmatic processes suggest that olivine-rich troctolites were formed in a zone with large magmatic transfer and accumulation, similar to the mantle-crust transition zone documented in ophiolites and at fast spreading ridges.
ISSN: 0009-2541

hal-00420916
https://hal.archives-ouvertes.fr/hal-00420916
DOI : 10.1016/j.chemgeo.2009.02.013

Éditeur(s) : HAL CCSD Wiley
Résumé : International audience
We analyse the fluid flow regime within sediments on the Eastern levee of the modern Mississippi Canyon using 3D seismic data and downhole logging data acquired at Sites U1322 and U1324 during the 2005 Integrated Ocean Drilling Program (IODP) Expedition 308 in the Gulf of Mexico. Sulphate and methane concentrations in pore water show that sulphate-methane transition zone, at 74 and 94 m below seafloor, are amongst the deepest ever found in a sedimentary basin. This is in part due to a basinward fluid flow in a buried turbiditic channel (Blue Unit, 1000 mbsf), which separates sedimentary compartments located below and above this unit, preventing normal upward methane flux to the seafloor. Overpressure in the lower compartment leads to episodic and focused fluid migration through deep conduits that bypass the upper compartment, forming mud volcanoes at the seabed. This may also favour seawater circulation and we interpret the deep sulphate-methane transition zones as a result of high downward sulphate fluxes coming from seawater that are about 5-10 times above those measured in other basins. The results show that geochemical reactions within shallow sediments are dominated by seawater downwelling in the Mars-Ursa basin, compared to other basins in which the upward fluid flux is controlling methane-related reactions. This has implications for the occurrence of gas hydrates in the subsurface and is evidence of the active connection between buried sediments and the water column.
ISSN: 1468-8115

hal-00590501
https://hal.archives-ouvertes.fr/hal-00590501
DOI : 10.1111/j.1468-8123.2010.00304.x

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The base of the Faro contouritic drift (IODP Site U1386) on the northern margin of the Gulf of Cádiz (Algarve margin) is characterized by two sequences of frequent gravity deposits with different ages and compositions. Among these gravity deposits, several relatively thick debrites (up to 12 m) have been observed and studied in detail.Sedimentological analyses have been performed and because of non-turbulent behavior of debris flows, detailed micropaleontological studies could be realized. Planktonic foraminifera thus allowed establishing a detailed biostratigraphy of these deposits. Benthic foraminifer and ostracod assemblages were used to evaluate the origin of the sediment composing these debris flows and estimate their run-out distance.These debrites are dated from Early Pliocene and early Pleistocene, and were deposited in a mesobathyal environment. They comprise silty mud clasts and matrixes with sand content up to 34%. The Early Pliocene debrites are bioclast-rich whereas the Early Pleistocene debrite is enriched in terrigenous particles. The data indicates that these debrites were triggered on the continental shelf and traveled less than 100 km, eroding the seafloor all along their path for the Early Pliocene debrites and only the first part of their path for the early Pleistocene debrite. Matrixes originate from failure areas whereas eroded sediments along the flow pathway are incorporated into the flow as clasts.High abundance of shelf fauna during the Early Pliocene and great supply of terrigenous particles from rivers during the early Pleistocene in the south-western Iberian margin have favored gravity flows from the continental shelf to the slope. The contouritic paleo-moat of the Faro drift has been a determining channeling feature for gravity flows along the Algarve margin during the early Pleistocene, testifying of the strong interaction between MOW circulation and down-slope processes. Tectonic and diapiric activities were significant during Early Pliocene and early Pleistocene on the Algarve margin and could have been triggering parameters of failures related to these debris flows.
ISSN: 0025-3227

hal-01356172
https://hal.archives-ouvertes.fr/hal-01356172
DOI : 10.1016/j.margeo.2015.08.018

Éditeur(s) : HAL CCSD Geological Society
Résumé : International audience
Palaeoclimate and sea-level studies commonly rely on interpretations based on depth. The location and quantity of core recovered during a drilling expedition has direct implications for subsequent applications of core measurements. A key objective of Integrated Ocean Drilling Program (IODP) Expedition 3 10 is to establish the course of postglacial sea-level rise for Tahiti in the South Pacific, for which assigning the correct depth to recovered core is fundamental. By convention, core is placed at the top of the core barrel run from which it was collected. Unless core recovery is 100%, this results in depth errors that are inversely proportional to the recovery. The difficulties of locating core are compounded for the Tahiti boreholes, where primary cavities in the carbonate reef successions are frequently present. Only through the integration of core with continuous geophysical measurements of the borehole can accurate depth positioning be achieved. High-resolution optical and acoustic images of the borehole wall allow effective visual correlation of the core and logging datasets. The final integrated depths form the underlying framework for all subsequent scientific analyses of recovered core employing evaluations that rely on depth. Furthermore, the integration process allows true core recoveries to be accurately estimated.
ISSN: 0016-7649

hal-00411915
https://hal.archives-ouvertes.fr/hal-00411915
DOI : 10.1144/0016-76492007-041

Éditeur(s) : HAL CCSD AGU and the Geochemical Society
Résumé : International audience
The 1415 m deep IODP Hole U1309D (Mid-Atlantic Ridge, 30 degrees N) is the second deepest hole drilled into slow spreading oceanic lithosphere. The recovered section comprises essentially gabbroic rocks, with a large range of compositions. The most primitive end-members of the gabbroic sequence, herein referred to as olivine-rich troctolites (ol > similar to 70%), have textures and geochemical compositions intermediate between that of mantle peridotites and primitive cumulates, indicative of melt impregnation processes. We carried out a detailed microstructural study to further characterize the petrogenetic processes leading to their formation, as well as discuss their mode of emplacement and relationship with neighboring mantle lithosphere. In olivine-rich troctolites, olivines range from coarse-grained subhedral crystals, commonly containing well-developed subgrains, to medium-grained rounded crystals with fewer or no substructures. They are embedded in large, undeformed pyroxene and plagioclase poikiloblasts. Olivine substructures reveal dislocation creep that is consistent with activation of the main high-temperature slip systems, dominantly (010)[100]. Olivine crystallographic preferred orientation is very weak but generally shows a relatively stronger, uncommon [001] concentration. These unusual olivine fabrics are interpreted as resulting from melt impregnation of a previously deformed olivine matrix: the solid olivine framework is disrupted by olivine corrosion along grain and subgrain boundaries, and the high-temperature plastic fabric is modified in a liquid-dominated regime. Based on mineral composition and fabrics and in comparison with what is observed in impregnated mantle rocks elsewhere, we posit that olivine represents relicts of mantle peridotites disaggregated by large melt influx, although the mantle origin of olivine is not unequivocally demonstrated yet. Whatever the initial lithology, impregnation by large volumes of melt has strongly modified the original composition and microstructure. If the mantle origin hypothesis is correct, the original olivine fabric could have been efficiently weakened by dunitization prior to disruption of the olivine framework by melt impregnation. Incorporation, at the base of the lithosphere, of small slivers of impregnated dunite into gabbroic sections, trapped between successive igneous units, may be a common mechanism of lower crustal accretion at slow spreading ridges. Extensive melt-rock interaction processes are expected to contribute significantly to the final chemical composition of erupted lavas.
ISSN: 1525-2027

hal-00496391
https://hal.archives-ouvertes.fr/hal-00496391
DOI : 10.1029/2009GC002995

Éditeur(s) : HAL CCSD Taylor & Francis
Résumé : International audience
ternational Ocean Discovery Program (IODP) Expedition 352 recovered a high-fidelity record of volcanism related to subduction initiation in the Bonin fore-arc. Two sites (U1440 and U1441) located in deep water nearer to the trench recovered basalts and related rocks; two sites (U1439 and U1442) located in shallower water further from the trench recovered boninites and related rocks. Drilling in both areas ended in dolerites inferred to be sheeted intrusive rocks. The basalts apparently erupted immediately after subduction initiation and have compositions similar to those of the most depleted basalts generated by rapid sea-floor spreading at mid-ocean ridges, with little or no slab input. Subsequent melting to generate boninites involved more depleted mantle and hotter and deeper subducted components as subduction progressed and volcanism migrated away from the trench. This volcanic sequence is akin to that recorded by many ophiolites, supporting a direct link between subduction initiation, fore-arc spreading, and ophiolite genesis.
ISSN: 0020-6814

hal-01685628
https://hal.archives-ouvertes.fr/hal-01685628
DOI : 10.1080/00206814.2016.1276482

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
At oceanic spreading centers, interactions between magma and hydrothermal convecting systems trigger major physical, thermal, and chemical exchanges. The two-pyroxene hornfels recovered from the base of the sheeted dike sequence at Integrated Ocean Drilling Program (IODP) Site 1256 (equatorial Eastern Pacific) are interpreted as a conducting boundary layer between the underlying axial melt lens and the hydrothermally cooled sheeted dikes. They are cut by numerous small, felsic veins, which were recently interpreted as a product of hydrous partial melting of sheeted dikes. Here, we present trace element compositions of products (melts and residues) of hydrous partial melting experiments using basalts and hornfels from IODP Site 1256 as starting material. The experimental products generated between 910 °C and 970 °C match the natural lithologies from Site 1256 in terms of major and trace element compositions. The compositions of the anatectic melts correspond to the compositions of the felsic veins, while the residual minerals match the compositions of the two-pyroxene hornfels, evidencing that hydrous partial melting is an important magmatic process in the gabbro/dike transition of fast-spreading mid-oceanic ridges. Our results complement previous experimental studies on anatectic processes occurring at the roof of the magma chambers from fast-spreading mid-ocean ridges. Moreover, calculations of mixing and assimilation fractional crystallization using the experimental partial melts as contaminant/assimilant showed that anatectic melts can only be a minor contributor to the contamination process.
ISSN: 0024-4937

hal-01419949
https://hal.archives-ouvertes.fr/hal-01419949
DOI : 10.1016/j.lithos.2016.05.001

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Carbonation of peridotite is a widespread process in nature, with emerging societal and environmental implications through geological storage of CO2. We studied the micro- and nano-scale structures associated with the carbonation of peridotite pervaded by a CO2-rich water and the induced changes of its hydrodynamic properties. Focused ion beam (FIB) nanotomography was coupled with scanning electron microscopy (SEM) and transmission electron microscopy (TEM) observations. An experimental sample of dunite core percolated by a CO2-rich fluid (pCO2 = 11 MPa) at 160 °C was compared with a naturally carbonated sample from the Atlantic Ridge (Exp. IODP 304). Results of the 8-days percolation experiment show continuous alteration of olivine into magnesite locally associated with a poorly crystalline serpentine-type mineral referred to as proto-serpentine. The experiment is also characterized by an overall decrease in rock porosity (from 7.7 to 6.4%) and permeability (from 8.5 × 10− 16 to 1.7 × 10− 16 m2). The primary inter-granular porosity (1 to 10 μm) is progressively filled with magnesite, leading to the overall decrease of permeability. At the same time, a secondary small-scale porosity (10 nm to 1 μm) is created at the tip of the dissolution features along the (010) cleavage planes of olivine grains. Carbonate crystals grow within these etch-pit structures behind the dissolution front. Dissolution and precipitation occur at a relative rate that maintains the secondary porosity over the timescale of the experiment (i.e. carbonate growth has to be the slowest one). This process is interpreted as an interface coupled dissolution-precipitation mechanism of olivine carbonation. Proto-serpentine is only formed in highly reduced flow areas, such as small olivine etch-pits (10 to 500 nm wide), which are more isolated from CO2 input. SEM-FIB analyses show the 3D preferential orientation of the dissolution-precipitation planes within a given olivine grain. It suggests the formation of lateral connections between the etch-pits (infra-micrometric “channels”) providing access to reactants and removing reaction products at the reaction sites. The experimental results show that olivine dissolution and magnesite precipitation converge to a quasi-steady state resulting in a constant carbonation rate controlled by reaction kinetics and not by mass transfer for this flow regime. The system self-regulates, independently of the porosity change at least during this incipient stage of olivine carbonation. Similar textures are observed in natural samples collected at 170 m-depth in the vicinity of veinlets driving late fluids down into the cooling oceanic lithosphere. This suggests that similar mechanisms are active in nature and can play an important role in the late, low temperature alteration stages of fractured peridotite. These results also highlight the critical role of nm-scale spatial arrangement of dissolution and precipitation features on mass transfers and on the sustainability of olivine carbonation through coupled dissolution-precipitation processes.
ISSN: 0009-2541

hal-01684733
https://hal.archives-ouvertes.fr/hal-01684733
DOI : 10.1016/j.chemgeo.2017.11.013

Éditeur(s) : HAL CCSD Oxford University Press (OUP)
Résumé : International audience
Serpentinization of olivine-rich troctolite from core 227, Integrated Ocean Drilling Program (IODP) Hole U1309D ranges from 10 to 90. Two episodes of serpentinization are recognized. The first, dominant in weakly serpentinized samples, is an approximately isochemical (except for water) replacement of olivine (Fo(8485)) by a mixture of serpentine (antigorite, Mg-number 92) and brucite (amakinite-rich; Mg-number 65). The compositions of the minerals in type 1 veins are a reflection of FeMg exchange between olivine and the brucite serpentine formed during early serpentinization. The early serpentinite veins (type 1) are thin ( 005 mm), irregular, and exploit pre-existing cracks in olivine. The presence of antigorite suggests that early serpentinization occurred at T 300C. Type 1 veins reflect rock-dominated serpentinization, became isolated early in their history, and persist as relicts in all but the most altered samples. The main episode of serpentinization is manifested by through-going lizardite (average Mg-number 96)magnetite veins (type 2). Type 2 veins define an anastomosing foliation, may be several millimeters in width and appear to exploit pre-existing, favorably oriented type 1 veins. Type 2 veins reflect open-system serpentinization. Magnetite in these veins formed by oxidation of the Fe in brucite and serpentine, whereas addition of silica to the system converted the Mg-component of the brucite to serpentine. Magnetite forms one or more distinct bands in the interior of the vein and is never in direct contact with relict olivine. A bruciteserpentine mixture, similar to that found in type 1 veins, but with lizardite instead of antigorite, is commonly present at the margins of type 2 veins (i.e. where they are in reaction contact with relict olivine). We interpret type 2 veins as a steady-state system where brucite continually forms at the olivinevein contact and then reacts out in the interior of the vein. This continual formation and destruction of brucite imposes an exceptionally low a(SiO2) on the system. Magnetite and olivine are never in contact in type 2 veins (or anywhere else) because the olivine-out reaction yields ferroan brucite and not magnetite. The desilication of serpentine in the type 2 veins is a reflection of the inherent instability of Fe-rich serpentine with respect to magnetite at low silica activity. Thus, the composition of serpentine in equilibrium with magnetite in serpentinites is a function of serpentinemagnetite and not serpentineolivine equilbria.
ISSN: 0022-3530

hal-00420931
https://hal.archives-ouvertes.fr/hal-00420931
DOI : 10.1093/petrology/egp004

Éditeur(s) : HAL CCSD IODP
Résumé : Expedition 335 of the riserless drilling platform Puntarenas, Costa Rica, to Balboa, Panama Site 1256 13 April-3 June 2011
https://hal.archives-ouvertes.fr/hal-00858776

hal-00858776
https://hal.archives-ouvertes.fr/hal-00858776
DOI : 10.2204/iodp.proc.335.2012