Éditeur(s) : HAL CCSD Oxford University Press (OUP)
Résumé : In this paper we present the potential of a new compact superconducting gravimeter (GWR iGrav) designed for groundwater monitoring. At first, 3 yr of continuous gravity data are evaluated and the performance of the instrument is investigated. With repeated absolute gravity measurements using a Micro-g Lacoste FG5, the calibration factor (−894.8 nm s−2 V−1) and the long-term drift of this instrument (45 nm s−2 yr−1) are estimated for the first time with a high precision and found to be respectively constant and linear for this particular iGrav. The low noise level performance is found similar to those of previous superconducting gravimeters and leads to gravity residuals coherent with local hydrology. The iGrav is located in a fully instrumented hydrogeophysical observatory on the Durzon karstic basin (Larzac plateau, south of France). Rain gauges and a flux tower (evapo-transpiration measurements) are used to evaluate the groundwater mass balance at the local scale. Water mass balance demonstrates that the karst is only capacitive: all the rainwater is temporarily stored in the matrix and fast transfers to the spring through fractures are insignificant in this area. Moreover, the upper part of the karst around the observatory appears to be representative of slow transfer of the whole catchment. Indeed, slow transfer estimated on the site fully supports the low-flow discharge at the only spring which represents all groundwater outflows from the catchment. In the last part of the paper, reservoir models are used to characterize the water transfer and storage processes. Particular highlights are done on the advantages of continuous gravity data (compared to repeated campaigns) and on the importance of local accurate meteorological data to limit misinterpretation of the gravity observations. The results are complementary with previous studies at the basin scale and show a clear potential for continuous gravity time-series assimilation in hydrological simulations, even on heterogeneous karstic systems.
ISSN: 0956-540X

hal-01526965
https://hal.archives-ouvertes.fr/hal-01526965
https://hal.archives-ouvertes.fr/hal-01526965/document
https://hal.archives-ouvertes.fr/hal-01526965/file/fores2016.pdf
DOI : 10.1093/gji/ggw396

Éditeur(s) : Elsevier Science Bv
Résumé : We developed a growth model for Crassostrea gigas oyster shells based on the use of in situ temporal manganese markings to calibrate natural cathodoluminescence (CL) changes in the shell hinge sections. A 30 min to 4-h exposure period with Mn2+ (90-120 mg l(-1)) was sufficient to create a detectable mark in the shells. This makes the Mn2+ markings the fastest mollusc shells marking technique to date. The natural CL from juvenile and adult shells cultured in four standard shellfish-farming locations along the English Channel and French Atlantic coasts, exhibited a seasonal pattern (maximum CL intensity occurring during summer periods, minimum CL intensity occurring during winter). Hydrobiological data recorded at Baie des Veys site allows us to attribute the seawater temperature as the main parameter controlling CL of shells. Chlorophyll a and seawater manganese concentration were not decisive in the luminescence intensity of the shells. A relationship between oyster hinge growth and the length of shells makes the umbo investigations a promising tool for oyster-farming and/or wild stock assessments. Shell growth varied at spatial and temporal scales (higher growth rates were observed during summer-autumn and lower during the winter period), depending on seawater temperature changes. Sub-monthly Mn2+ markings support the fact that shell deposition can occur under temperatures below 6 degrees C, which has to be taken into account for both shellfish production and environmental monitoring derived from chemical compositions of the shells. Finally, our results point out the efficiency of age and shell growth rate determination by CL analysis in further shellfish ecosystem researches.
Aquaculture (0044-8486) (Elsevier Science Bv), 2010-02 , Vol. 300 , N. 1-4 , P. 206-217

Droits : 2010 Elsevier B.V. All rights reserved.
http://archimer.ifremer.fr/doc/00002/11300/7912.pdf
DOI:10.1016/j.aquaculture.2009.12.018
http://archimer.ifremer.fr/doc/00002/11300/

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The thermal evolution of sediments in the shallowest part of sedimentary basins is challenging to investigate as most of the geothermometers are at their application limits. This is typically the case of the Callovian-Oxfordian claystones at the eastern border of the Paris Basin. A recent 2000 m deep well penetrated the entire Jurassic and Triassic sedimentary series and permitted coring of sediments never reached by previous drilling in this part of the basin. Thanks to the use of several independent geothermometers (apatite fission track thermochronology, fluid inclusion microthermometry, clay mineralogy and sedimentary organic matter evolution) the burial history of the Mesozoic series has been reconstructed, modeled and calibrated using kinetic algorithms relevant to the various paleothermometers used. In addition to these conventional methods, an innovative approach was developed using the temperature-dependence of the magnetic mineral assemblage within clay-rich sediments ("MagEval"). Thermal modeling indicates that the Callovian-Oxfordian and the Lower Triassic experienced maximum burial temperatures of 50 +/- 5 C-circle and 90 +/- 10 C-circle respectively, i.e., about 25 C higher than present-day. This temperature offset implies the erosion of several hundred meters of sediments which, depending on the thermal flux and conductivity considered, most likely constituted Upper Cretaceous chalk deposits. Falling sea level resulted in the exposure and subsequent dismantling of the chalk cover at the beginning of Cenozoic times. The eastern border of the basin was then subjected to slow erosion and discrete tectonic deformation.
ISSN: 0264-8172

hal-01313142
https://hal.archives-ouvertes.fr/hal-01313142
DOI : 10.1016/j.marpetgeo.2013.08.019

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Melting experiments were performed on a silica-rich peridotite composition at 10-17 GPa to determine majoritic garnet-melt partition coefficients (D) for major and trace elements. Our results show that D for many elements, including Na, Sc, Y and rare earth elements (REE), varies significantly with increasing pressure or proportion of majorite component. Lu and Sc become incompatible at 17 GPa, with D decreasing from 1.5 at 10 GPa to 0.9 at 17 GPa. As predicted from lattice strain, log D for isovalent cations entering the large site of majoritic garnet exhibits a near-parabolic dependence on ionic radius. Our data are used to refine a previously published predictive model for garnet-melt partitioning of trivalent cations, which suffered from a lack of calibration in the 10-20 GPa range. Our results suggest that Archean Al-depleted komatiites from Barberton (South Africa) may have been generated by partial melting of dry peridotite at depths between 200 and 400 km. We also speculate that transition zone diamonds from Kankan (Guinea), which contain inclusions of majoritic garnet, may have formed from the partial reduction of CO2-rich magmas that subsequently transported them to the surface. This hypothesis would provide an explanation for the REE patterns of majoritic garnet trapped within these diamonds, including Eu anomalies. Finally, we show that segregation of majoritic garnet-bearing cumulates during crystallisation of a deep Martian magma ocean could lead to a variety of Lu/Hf and Sm/Nd ratios depending on pressure, leading to a range of ε143Nd and ε176Hf isotope signatures for potential mantle sources of Martian rocks.
ISSN: 0024-4937

hal-00767567
https://hal.archives-ouvertes.fr/hal-00767567
DOI : 10.1016/j.lithos.2012.06.013

Éditeur(s) : HAL CCSD
Résumé : International audience
New inclinometers devoted to hydrological studies were set up in the Vosges Mountains (France). Two orthogonal 100-meter base hydrostatic inclinometers were installed in December 2004 as well as a hydrometeorological monitoring system for the 100-km² hydrological unit around the inclinometer. As inclinometers are very sensitive to environmental influences, this observatory is a test site to confront hydrological modelling and geodetic observations. Physical modelling to remove hydrological effects without calibrating on geodetic data is tested on these instruments. Specifically, two deformation processes are most important: fluid pressure variations in nearby hydraulically active fractures and surface loading at regional scale.
International Association of Geodesy Symposia
Perugia, Italy

hal-00710442
https://hal.archives-ouvertes.fr/hal-00710442
https://hal.archives-ouvertes.fr/hal-00710442/document
https://hal.archives-ouvertes.fr/hal-00710442/file/2007IUGG_proceedingsIAG.pdf
DOI : 10.1007/978-3-540-85426-5_63

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : The acquisition of reliable data sets representative of hydrological regimes and their variations is a critical concern for water resource assessment. For the subsurface, traditional approaches based on probe measurements, core analysis, and well data can be laborious, expensive, and highly intrusive, while only yielding sparse data sets. For this study, an innovative field survey, merging relative microgravimetry, magnetic resonance soundings, and hydrological measurements, was conducted to evaluate both surface and subsurface water storage variations in a semiarid Sahelian area. The instrumental setup was implemented in the lower part of a typical hillslope feeding to a temporary pond. Weekly measurements were carried out using relative spring gravimeters during 3 months of the rainy season in 2009 over a 350 × 500 m2 network of 12 microgravity stations. Gravity variations of small to medium amplitude (≤220 nm s−2) were measured with accuracies better than 50 nm s−2, revealing significant variations of the water storage at small time (from 1 week up to 3 months) and space (from a couple of meters up to a few hundred meters) scales. Consistent spatial organization of the water storage variations were detected, suggesting high infiltration at the outlet of a small gully. The comparison with hydrological measurements and magnetic resonance soundings involved that most of the microgravity variations came from the heterogeneity in the vadose zone. The results highlight the potential of time lapse microgravity surveys for detecting intraseasonal water storage variations and providing rich space-time data sets for process investigation or hydrological model calibration/evaluation
ISSN: 0043-1397

hal-00857351
https://hal.archives-ouvertes.fr/hal-00857351
DOI : 10.1002/wrcr.20235

Éditeur(s) : HAL CCSD Springer Verlag
Résumé : International audience
Electrical resistivity soundings are used by geophysicists to determine the structure and composition of the Earth's crust and mantle and to explore natural resources (ore, oil, gas, water). Their interpretations in terms of composition and in-situ physical conditions depend mainly on laboratory measurements of electrical conductivity of rocks at simulated crustal conditions of temperature, pressure, saturation and pore pressures. These measurements present a numbers of limitations, in particular, in the case where conductive pore fluids are present, as in the case of deep reservoir conditions, where temperature exceeds 250 A degrees C. Here, we present a new cell capable of measuring electrical conductivity of large saturated samples at confining pressure up to 200 MPa, pore pressure up to 50 MPa, and temperature up to 500 A degrees C. The measurement cell has been developed in a commercial, internally heated, gas pressure apparatus (Paterson press). It is based on the concept of "guard ring" electrode, which is adapted to samples that are jacketed by a very conductive, metallic material. Numerical modeling of the current flow in the electrical cell allowed defining the optimal cell geometry. Calibration tests have been performed on Fontainebleau sandstones saturated with electrolytes of different conductivities, up to 350 A degrees C. The resulting electrical formation factor and temperature dependence of electrical conductivity are in very good agreement with previous studies. This new cell will improve the exploration and exploitation of deep fluid reservoirs, as in unconventional, high enthalpy geothermal fields. In particular, the investigations address possible effects of fluid-rock interactions on electrical resistivity of a reservoir host rock.
ISSN: 0169-3913

hal-00681997
https://hal.archives-ouvertes.fr/hal-00681997
DOI : 10.1007/s11242-011-9846-2

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
We examine absolute gravity (AG) and vertical Global Positioning System (GPS) time series between 1995 and 2010 at eight collocated sites in mid-continent North America. The comparison of AG and GPS rates aligned to ITRF2005 yields a gravity/uplift ratio of -0.17 +/- 0.01 mu Gal mm(-1) (1 mu Gal = 10 nm s(-2)) and an intercept of -0.1 +/- 0.5 mm yr(-1). In contrast, aligning the GPS velocities to ITRF2000 results in a gravity/uplift intercept of -1.3 +/- 0.5 mm yr(-1). The near-zero gravity/uplift offset for the ITRF2005 (or ITRF2008) results shows a good alignment of the GPS vertical velocities to Earth's center of mass, and confirms that GPS velocities in this reference frame can be compared to predictions of geodynamic processes such as glacial isostatic adjustment (GIA) or sea-level rise. The observed gravity/uplift ratio is consistent with GIA model predictions. The ratio remains constant in regions of fast and slow uplift, indicating that GIA is the primary driving process and that additional processes such as local hydrology have a limited impact on a decadal time-scale. Combining AG and GPS measurements can provide significant constraints for geodetic, geodynamic, and hydrological studies. Citation: Mazzotti, S., A. Lambert, J. Henton, T. S. James, and N. Courtier (2011), Absolute gravity calibration of GPS velocities and glacial isostatic adjustment in mid-continent North America, Geophys. Res. Lett., 38, L24311, doi:10.1029/2011GL049846.
ISSN: 0094-8276

hal-00689010
https://hal.archives-ouvertes.fr/hal-00689010
DOI : 10.1029/2011GL049846

Éditeur(s) : HAL CCSD Springer-Verlag
Résumé : International audience
High-resolution borehole strainmeters are usually installed in tectonically active regions in order to detect slow-slip events, and to estimate slow transients related to earthquake swarms. However, they are also sensitive to other numerous influences, internal or external. Furthermore, the quality of their coupling to the rock through cementation, and the mechanical properties of the rock mass around them, have a critical influence on their records. Many of the existing strainmeters present such problems, and the correction for these effects often remains a challenge. In this paper, we present the analysis of the records of a high-resolution borehole dilatometer (Sacks–Evertson), located in the seismically active rift of Corinth (Greece) (station TRZ in the Trizonia island). We show that the instrument suffers from an only partial-solid coupling, and that the nearby sea tides have a direct (through elastic response) and indirect (through pore-pressure diffusion) effect on the dilatation signal, which adds up to the solid tidal strain source. We propose a methodology that allows, in a first step, to better separate the internal (solid tide) from the external (air pressure, sea level) influences, by calculating a frequency-dependent transfer function outside the range of the tidal periods. We then extrapolate this function, in particular at the tidal periods. In a second step, the resulting variation with frequency of the coupling coefficients with sea level led us to estimate the proportion of instrument not solidly cemented to rock (thus in contact with water pore pressure), which is about 90 % of the total height. Despite the small proportion of solid coupling, the sensor resolution remains very good up to a few tens of hours of a time period, thanks to the confining effects of the rocks on the local pore pressure. These results allow us to correct for the external effects, and reduce the associated variance by 80–90 % (in the period range of minutes to days). The empirical correction of the sea level effect could be explained using a simple Boussinesq’s approximation and 1D pore-pressure diffusion model, which contributed to better constraint of some of the poro-elastic parameters in the vicinity of the instrument. After correction, the solid tidal signal at the 24-h period is almost anti-correlated with those of the theoretical solid tide. This surprising result is consistent with a similar anti-correlation observed for the longest period surface waves (200 s) comparing the TRZ dilatometer signals to the strain measured by a nearby borehole strainmeter (MOK, 15 km). This could be related to the presence of a shallow fault close to the instrument, which would creep in response to seismic wave-related stress.
ISSN: 0033-4533

hal-01122853
https://hal.archives-ouvertes.fr/hal-01122853
DOI : 10.1007/s00024-013-0742-2

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
There are emerging concerns about potential effects on child health and development of early-life exposure to substances such as brominated flame retardants (BFRs), perfluorinated compounds (PFCs), phthalates and phenols (including bisphenol A (BPA)); pregnancy and birth cohort studies are ideally designed to study such concerns prospectively. As part of the ENRIECO project, we evaluated existing human biomonitoring data for these substances in European birth cohorts and develop recommendations for more harmonized methods that will enable combination and comparison of cohort data in the future. The ENRIECO inventory shows that 20 European birth cohorts have measured or are measuring BFRs (N=10), PFCs (N=11), phthalates (N=16) or phenols (N=8). Generally, samples were collected prenatally or at birth and measurements involved few subjects in each cohort (a few hundred maximum). Biological matrices, timing, and analytical methods of the measurements varied between cohorts. Few cohorts have measured at multiple time points or in children. In European cohorts, levels of BFRs were very low and at least 10-fold lower than in US; levels of PFCs and phthalates have decreased over the last decade since the phasing out of certain of these compounds; concentrations of phenols are comparable to those in the US. Although there is little published data in the cohorts now, many measurements are ongoing and we recommend that cohorts start working towards combined and comparison studies. Specific recommendations for use of existing data include the development of conversion models for the different media used for measurement of persistent chemicals, and inter-laboratory comparisons and calibrations. Recommendations for further data collection include more evaluation of exposure to these chemicals in children; repeated measurements of non-persistent chemicals; validation and harmonisation of questionnaires; and the development of mechanisms for fast European birth cohort response for the detection and prioritisation of new chemicals of concern.
ISSN: 1438-4639

hal-01118579
https://hal-univ-rennes1.archives-ouvertes.fr/hal-01118579
DOI : 10.1016/j.ijheh.2012.05.009
PUBMED : 22795704

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The western margin of the Gulf of Mexico (Veracruz State, Mexico) displays an extensive Neogene gravitational system, whereby the Neogene siliciclastic sediments are detached from underlying Mesozoic carbonates along decollement surface in Oligocene underpressured clays. Rapidly subsiding half-grabens develop above the footwall associated with major listric faults, whereas mini-basins develop in the deepest parts of the slope, in conjunction with the growth of west-verging compressional features. Between the high-angle normal faults in the west and the thrust anticlines in the east, a wide roll-over structure has grown progressively, resulting in a major topographic break in the morphology of the slope profile. Coupled forward kinematic modelling (Thrustpack) and stratigraphic modelling (Dionisos), calibrated against seismic profiles and two key nearshore wells, have been applied to representative regional transects across the margin, in order to quantify the vertical (subsidence) and horizontal (gravitational) deformations, and to discuss the impact of various key parameters on the distribution of debris flow depositions. These simulations are compared with data from distant ODP wells and discussed in the scope of current exploration strategies in both the US and Mexican portions of the Gulf of Mexico basin.
ISSN: 0040-1951

hal-00424595
https://hal.archives-ouvertes.fr/hal-00424595
DOI : 10.1016/j.tecto.2008.06.017

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The tropical to warm-temperate marine brown macroalgal genus Lobophora (Dictyotales, Phaeophyceae) recently drew attention because of its striking regional diversity. In this study we reassess Lobophora global species diversity, and species distributions, and explore how historical factors have shaped current diversity patterns. We applied a series of algorithmic species delineation techniques on a global mitochondrial cox3 dataset of 598 specimens, resulting in an estimation of 98–121 species. This diversity by far exceeds traditional diversity estimates based on morphological data. A multi-locus time-calibrated species phylogeny using a relaxed molecular clock, along with DNA-confirmed species distribution data was used to analyse ancestral area distributions, dispersal-vicariance-founder events, and temporal patterns of diversification under different biogeographical models. The origin of Lobophora was estimated in the Upper Cretaceous (−75 to −60 MY), followed by gradual diversification until present. While most speciation events were inferred within marine realms, founder events also played a non-negligible role in Lobophora diversification. The Central Indo-Pacific showed the highest species diversity as a result of higher speciation events in this region. Most Lobophora species have small ranges limited to marine realms. Lobophora probably originated in the Tethys Sea and dispersed repeatedly in the Atlantic (including the Gulf of Mexico) and Pacific Oceans. The formation of the major historical marine barriers (Terminal Tethyan event, Isthmus of Panama, Benguela upwelling) did not act as important vicariance events. Long-distance dispersal presumably represented an important mode of speciation over evolutionary time-scales. The limited geographical ranges of most Lobophora species, however, vouch for the rarity of such events.
ISSN: 1055-7903

hal-01535635
http://hal.upmc.fr/hal-01535635
http://hal.upmc.fr/hal-01535635/document
http://hal.upmc.fr/hal-01535635/file/Vieira_2017_Historical.pdf
DOI : 10.1016/j.ympev.2017.03.007