Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Contractional deformation of highly porous sandstones is poorly explored, as compared to extensional deformation of such sedimentary rocks. In this work we explore the highly porous Aztec Sandstone in the footwall to the Muddy Mountain thrust in SE Nevada, which contains several types of deformation bands in the Buffington tectonic window: 1) Distributed centimeter-thick shear-enhanced compaction bands (SECBs) and 2) rare pure compaction bands (PCBs) in the most porous parts of the sandstone, cut by 3) thin cataclastic shear-dominated bands (CSBs) with local slip surfaces. Geometric and kinematic analysis of the SECBs, the PCBs and most of the CSBs shows that they formed during ∼E–W (∼100) shortening, consistent with thrusting related to the Cretaceous to early Paleogene Sevier orogeny of the North American Cordilleran thrust system. Based on stress path modeling, we suggest that the compactional bands (PCBs and SECBs) formed during contraction at relatively shallow burial depths, before or at early stages of emplacement of the Muddy Mountains thrust sheet. The younger cataclastic shear bands (CSBs, category 3), also related to E–W Sevier thrusting, are thinner and show larger shear offsets and thus more intense cataclasis, consistent with the initiation of cataclastic shear bands in somewhat less porous materials. Observations made in this work support earlier suggestions that contraction lead to more distributed band populations than what is commonly found in the extensional regime, and that shear-enhanced compaction bands are widespread only where porosity (and permeability) is high.
ISSN: 0191-8141

hal-01171854
https://hal.archives-ouvertes.fr/hal-01171854
DOI : 10.1016/j.jsg.2015.02.014

Éditeur(s) : HAL CCSD
Résumé : Several major earthquakes have struck the 2500 km long Himalayan range during the past century. However, both the maximum size of such earthquakes and the probability of occurrence of a magnitude 9 megaquake are still a mater of debate. In this framework it is of key importance to investigate the lateral segmentation of the Himalayan arc in order to deepen our understanding of the mechanisms that control such events as well as their extents. Besides the remarkably uniform tectonic set-up and the fact that most studies on the Himalayas have focused on Central Nepal, several indications of along strike changes can be gathered.This thesis brings new constraints on lateral variations of crustal structure and of deformation between western Nepal (~80°E) and eastern Bhutan (~92°E).The first part of this thesis focuses on the lateral variations of crustal structure. In the past three years we have carried out four land gravity campaigns. We have established 366 new gravity measurement points to fill the data gaps in central and western Nepal as well as in Bhutan. This new dataset, together with available seismological data, is used to constrain thermo-mechanical models of the bending of the India plate underneath the Himalayas. While the inferred crustal geometry does not exhibit major along-strike variations over central and eastern Nepal, the shorter wavelength flexure of the lithosphere in Bhutan is associated with a weaker upper mantle rheology.The second part focuses on the lateral variations of recent deformation in the Himalayas. Fifteen years of paleoseismological investigations have extended the catalogue of major Himalayan events over the last millennium. Combining these information with secular loading, we assess the spatial and temporal stress changes on the Main Himalayan Thrust along the orogen over the last nine centuries. Our calculations indicate that inter-seismic loading has now nearly overcome the Coulomb stress decrease caused by the great ~1100 medieval earthquake. Our results also point out that the 1897 Shillong plateau earthquake does not have a major influence on the stress accumulated on the Main Himalayan Thrust since then. In order to better characterize active tectonics in the Bhutan Himalayas where no studies were done so far, we carried out a morphotectonic analysis in the south-central part of the kingdom. We show that the same amount of Holocene deformation is accommodated on the frontal thrust in Bhutan as on the neighbouring portions of the Himalayan arc. We also find evidences for two major (M>8) earthquakes on this thrust in the Bhutan Himalayas during the last millennium. Our results therefore show that Bhutan cannot be considered as a seismic gap. They also challenge the interpretation of one single ~1100 medieval mega-event that would have ruptured the Main Frontal Thrust from central Nepal to eastern Bhutan.
Au cours du dernier siècle, plusieurs séismes majeurs ont affecté l'Himalaya. Cependant, la taille maximale de ces événements et la probabilité d'occurrence de méga-séismes avec des magnitudes proches de 9 sont toujours matière à débat. L'étude de la segmentation de l'arc Himalayen est donc primordiale afin de comprendre les mécanismes qui contrôlent ces séismes ainsi que leur extension spatiale. La compréhension du cycle sismique en Himalaya est aujourd'hui essentiellement basée sur des études menées au Népal central, ce qui limite notre connaissance de son fonctionnement tri-dimensionnel. Ce travail de thèse permet d'apporter de nouvelles contraintes sur les variations latérales de la déformation crustale dans la zone comprise entre l'ouest Népal (~80°E) et l'est Bhoutan (~92°E). La première partie de cette thèse est consacrée à l'étude des variations latérales de la structure lithosphérique. Quatre campagnes gravimétriques ont été réalisées entre 2010 et 2012. Elles ont permis d'étendre le réseau gravimétrique Népalais jusqu'à l'ouest Népal et d'établir le premier réseau gravimétrique Bhoutanais. Ce nouveau jeu de données, combiné avec les données sismologiques disponibles, permet de contraindre des modèles thermo-mécaniques de la flexure de la plaque Indienne sous l'Himalaya. Les résultats suggèrent qu'il n'existe pas de variations latérales majeures du comportement mécanique de la lithosphère Indienne entre le centre et l'est Népal contrairement au Bhoutan où une rigidité flexurale plus faible est nécessaire pour expliquer les données.La deuxième partie de cette thèse est consacrée à l'étude des variations latérales des déformations récentes dans le prisme Himalayen. Les études paléosismologiques menées depuis 15 ans en Himalaya ont permis d'étendre le catalogue des événements majeurs sur le dernier millénaire. En intégrant à la fois les contraintes disponibles sur ces séismes majeurs et le chargement séculaire, nous étudions les variations spatiales et temporelles de l'état de contrainte du chevauchemlent Himalayen principal le long de l'arc. Nos calculs montrent que même dans la cas où un méga-séisme se serait produit en ~1100 en Himalaya, le chargement séculaire a quasiment compensé la chute de contrainte associée. Les modèles montrent aussi que le séisme du Shillong ne joue pas un rôle majeur sur les contraintes accumulées sur le chevauchement Himalayen depuis 1897 au niveau du Bhoutan. Enfin, nous présentons les premières contraintes sur la tectonique active au Bhoutan. L'étude morphotectonique réalisée au centre du Sud-Bhoutan a permis de montrer que la majeure partie de la déformation Holocène est accommodée au niveau du front Himalayen, comme au Népal. Nous montrons aussi des évidences de ruptures de surface avec des décalages verticaux de plusieurs mètres associés à deux séismes majeurs sur le dernier millénaire. Ces évidences remettent en cause l'interprétation d'un méga-séisme en ~1100.
https://tel.archives-ouvertes.fr/tel-01002381

NNT : 2013MON20074
tel-01002381
https://tel.archives-ouvertes.fr/tel-01002381
https://tel.archives-ouvertes.fr/tel-01002381/document
https://tel.archives-ouvertes.fr/tel-01002381/file/35970_BERTHET_2013_archivage_cor.pdf

Éditeur(s) : HAL CCSD
Résumé : In this work on a complete transect of the west‐central Pyrenees, we combine low temperature thermochronology (apatite fission tracks, AFT) with a detailed structural analysis to describe vertical movements related to the thrusting system evolution, and to determine the influence of the latter on the sedimentation/burial/exhumation cycle of thesynorogenic deposits of the southern foreland basin (Jaca and Ainsa basins). AFT analysis from a transect of the south‐Pyrenean basin show the southward decrease of the fission track reset level from the southern edge of the Axial Zone to the South‐Pyreneanfrontal thrust, implying the southwards decrease of the burial amount from more than 5kmin the north to less than 3km in the south assuming an average geothermal gradient of 25°C.km‐1. The structural setting of the Jaca basin attests that the burial of the synorogenicsediments was mainly due to the sedimentary accumulation. AFT data from the northernpart of the basin display a late Oligocene‐early (middle) Miocene cooling event. Newinterpretation of industrial seismic reflection profiles across the Jaca basin suggests that the Oturia thrust is rooted in the Bielsa basement thrust, responsible for the early (‐middle) Miocene out‐of‐sequence tectonic reactivation of the southern flank of the Axial Zone (Jolivet et al., 2007). These results reveal a lower Miocene (Burdigalian ‐?Langhian) out‐of sequence episode of tectonic activity of the interior of the south‐Pyrenean foreland basin. AFT data from the Axial Zone and the North‐Pyrenean Zone confirm the general southwardmigration of the thrusting system, and also bring evidence of the late Oligocene‐lowe rMiocene out‐of‐sequence tectonic reactivation of the northern flank of the Axial Zone. All these results attest of a late Oligocene‐lower Miocene (Burdigalian‐?Langhian) "pop‐up" reactivation of the inner part of the west‐central Pyrenees, younger than the sealing of thesouth‐Pyrenean front (Aquitanian‐?Burdigalian) which is classically considered to mark the end of the Pyrenean compression. These results lead us to propose a new crustal scale evolution model of the west‐central Pyrenees in 3 stages: (i) From the Late Cretaceous to themiddle Eocene, the orogenic prism is characterised by the absence of relief, related to theinversion of Cretaceous extensional structures leading to the accretion of thin crustal units; (ii) The late Eocene‐Oligocene stage corresponds to the continental collision, marked by the creation of important relief associated with the accretion of thick crustal units; (iii) During the early Miocene, the inner part of the Pyrenean wedge is tectonically reactivated.
Ce travail de thèse concerne une transversale complète des Pyrénées centro-occidentales, où on a combiné la thermochronologie basse température (traces de fission sur apatites, TFA) avec une analyse structurale détaillée pour décrire les mouvements verticaux associés à l'évolution du système chevauchant, et pour déterminer l'influence de ce dernier sur le cycle sédimentation/enfouissement/exhumation des dépôts synorogéniques du bassin d'avant‐chaine sud (bassins de Jaca et Ainsa). L'analyse TFA complète les données déjà publiées dans la Zone Axiale et la Zone Nord‐Pyrénéenne, e tconstitue la première étude de ce genre dans un bassin d'avant‐chaîne pyrénéen. Les données TFA sur la transversale du bassin sud‐pyrénéen montrent une diminution vers le sud du degré d'effacement des traces de fission, traduisant la diminution vers le sud de la quantité d'enfouissement, supérieure à 5 km au nord et inférieure à 3 km au sud dans l'hypothèse un géotherme de 25°.km‐1. Le contexte géologique montre que l'enfouissement est principalement lié à l'accumulation des dépôts synorogéniques. Les données TFA de lapartie nord du bassin montrent un refroidissement d'âge Oligocène supérieur‐Miocèneinferieur (moyen). Par ailleurs, une nouvelle interprétation de profils de sismiques réflexiondans le bassin de Jaca montre que le chevauchement d'Oturia s'enracine dans lechevauchement de socle de Bielsa, responsable de l'exhumation tectonique hors‐séquencedu bord sud de la Zone Axiale au Miocène inférieur (‐moyen) (Jolivet et al., 2007). Cesrésultats attestent donc de l'exhumation tectonique hors‐séquence au Miocène inférieur (Burdigalien‐ ?Langhien) de la partie nord du bassin d'avant‐chaine sud‐pyrénéen. Des données TFA obtenues dans la Zone Axiale et la Zone Nord‐Pyrénéenne confirment lamigration générale vers le sud du système chevauchant, et mettent également en évidencela réactivation tectonique hors‐séquence du bord nord de la Zone Axiale à l'Oligocèneterminal‐Miocène inférieur. L'ensemble de ces résultats atteste donc de la réactivation en " pop‐up " de la parties interne des Pyrénées centre‐ouest à l'Oligocène supérieur‐Miocèneinférieur (Burdigalien‐ ?Langhien), postérieurement au scellement du front sud‐pyrénéen (Aquitanien‐ ?Burdigalien) classiquement considéré comme marquant la fin de lacompression pyrénéenne. Ces données nous ont permis de proposer un nouveau modèle d'évolution crustale des Pyrénées centro‐occidentales en 3 grandes étapes : (i) du Crétacé supérieur à l'Eocène moyen, le prisme est caractérisé par une absence de relief, en lien avec l'inversion de structures extensives crétacées conduisant à l'accrétion de petites écailles crustales ; (ii) la période Eocène supérieur‐Oligocène correspond à la collision continentale proprement dite, et est marquée par la création d'importants reliefs associés à l'accrétion d'épaisses unités crustales ; (iii) au Miocène inférieur, la partie interne du prisme pyrénéen est réactivée.
https://tel.archives-ouvertes.fr/tel-00772154

Droits : info:eu-repo/semantics/OpenAccess
tel-00772154
https://tel.archives-ouvertes.fr/tel-00772154
https://tel.archives-ouvertes.fr/tel-00772154/document
https://tel.archives-ouvertes.fr/tel-00772154/file/thesemeresse.pdf

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The Cycladic Blueschist Unit (CBU) represents the northern passive margin of the Adria continental block and ophiolites that are the remnants of the Pindos Ocean, which were affected by high pressure-low temperature metamorphism in the blueschist and eclogite facies during the Eocene. Prior to the Lutetian, the ophiolitic and margin units were thrust towards the SW inside a NE-dipping subduction zone. Two subsequent exhumation stages are characterized by top-to-the-NE senses of shear: i) from mantle depths to lower crustal levels, before 37 Ma, which was accommodated by an extensional inversion of the Vardar suture zone, and ii) from deep crustal levels to the near-surface, between 30 and 20 Ma, which was accommodated by the North Cycladic Detachment. It is during this late stage of ductile exhumation that the central Cyclades Core Complex was exhumed. Segmentation of the CBU by normal faults started at 12 Ma, as recorded by the low temperature thermochronometers, and was coeval with block rotation and folding with NS-trending axes, which were predominantly controlled by the Myrthes-Ikaria strike-slip fault in the centre of the Cyclades. A map restoration of the CBU geometry, prior to segmentation, has been carried out using available structural and paleomagnetic data. The restoration shows that, following the CBU exhumation from mantle depths to crustal levels, a single core complex was exhumed along a single NE dipping detachment.
ISSN: 0040-1951

insu-00672320
https://hal-insu.archives-ouvertes.fr/insu-00672320
DOI : 10.1016/j.tecto.2011.12.025

Éditeur(s) : HAL CCSD American Geophysical Union (AGU)
Résumé : International audience
The Calabro-Peloritan belt constitutes the eastward termination of the southern segment of the Alpine Mediterranean belt. This orogenic system was built up during the convergence between the Eurasian and the African plates, roughly directed North-South since the Upper Cretaceous. It was subsequently fragmented during the opening of the Western Mediterranean basins since Oligocene times. The curved shape of the Calabro-Peloritan belt was acquired during the opening of the Tyrrhenian basin since Tortonian. The origin, kinematics and significance of the Calabro-Peloritan tectonic pile are still debated. Our data in the Aspromonte Massif of Southern Calabria reveal an Alpine history marked by two main superimposed kinematic regimes. (i) A first phase corresponds to the piling up of basement nappes with a top-to-the-SE vergence, i.e in a direction orthogonal to the belt trend and towards the Adriatic foreland. This external vergence is similar to what is observed in both Northeastern Sicily and Northern Calabria. In Sicily, the age of nappe piling is Alpine, as evidenced by pinched slices of Mesozoïc sediments. In the Aspromonte Massif, thrusting age is less constrained. Our data suggest remnants of late Hercynian structuration before the Alpine stacking. (ii) A second phase corresponds to the thinning of the continental crust, dated at around 30 Ma by both geochronological and stratigraphical data. This extension is mainly localized on two low-angle detachment contacts, with top-to-the-NE displacement. The lower one corresponds to the reworking of the former main nappe contact. The upper one is a large detachment fault cutting across the pile from upper sedimentary levels down to metamorphic basement. Extension of similar Alpine age and similar internal vergence has been already recognized in other parts of the Calabro-Peloritan Arc: in the basement nappes of Northeastern Sicily and in the ophiolitic units of Northern Calabria. Coming back to the original geometry and position of the Calabro-Peloritan belt, before its bending and the opening of the Liguro-Provençal and Tyrrhenian basins, we evidence a homogeneous Oligocene NE-SW extension all along the Calabro-Peloritan segment of the Alpine Mediterranean belt. This tectonometamorphic history is best explained within the framework of the continuous Tertiary westward dipping subduction of the Tethyan oceanic domain below the European active margin and the progressive eastward retreat of the Apennine trench since Oligocene times.
ISSN: 0278-7407

hal-00283182
https://hal.archives-ouvertes.fr/hal-00283182
https://hal.archives-ouvertes.fr/hal-00283182/document
https://hal.archives-ouvertes.fr/hal-00283182/file/Heymes_et_al_2008.pdf
DOI : 10.1029/2007TC002157

Éditeur(s) : HAL CCSD
Résumé : High Pressure - Low Temperature (HP-LT) rocks testify for burying and exhumation of crustal material in subduction zones. Their complete exhumation is the result of processes acting during (syn-orogenic) and after (post-orogenic) subduction is active, the latter partly obliterating the first. In the Aegean domain, the Attic-Cycladic Blueschist unit (ACBU) is a HP-LT unit exhumed in metamorphic core complexes (MCCs) in the back-arc domain of the Hellenic subduction zone. This study is an attempt to distinguish features related to syn-orogenic exhumation processes responsible for the first stages of exhumation This syn-orogenic "message" has to be read through the post-convergence structural and thermal overprint that accompanied the formation of the MCCs. Particularly, the geometry, the timing and the amount of the syn-orogenic exhumation has to be determined. We investigate these features with coupled field, metamorphic petrology and radiochronology studies First, based on observations on Ios (southern Cyclades), it has recently been proposed that syn-orogenic exhumation of the ACBU was accommodated by a basal thrust over the Cycladic Basement (CB) [Huet, et al., 2009]. The peak conditions, deduced from pseudosections calculation for the Ios main lithologies, are 500 °C-19 kbar for the ACBU and 550 °C-16 kbar for the CB. Exhumation until 400 °C-8 kbar is considered as syn-orogenic. Second, phengites populations, single grains and in situ 40Ar-39Ar geochronology has been carried out on samples from Tinos and Andros (northern Cyclades), Syros (central Cyclades) and Ios. The results gather in several clusters: 50-55 Ma, 40-45 Ma, 30-35 Ma, and 22-26 Ma. Based on these new P-T-t data and a synthesis of published data, we are able to refine the geometry and the timing of the exhumation of the ACBU. Data from the whole Cyclades exhibit little differences in ages and P-T conditions for the successive stages of exhumation. The peak of pressure (500±50 °C-18±1 kbar) has been reached at 50-55 Ma from Tinos to Ios. The onset of the exhumation occurred at 40-45 Ma in blueschist facies conditions, between a thrust at their bottom and a detachment at their top. The following decompression was accompanied by cooling until 30-35 Ma (400±50 °C-8±1 kbar). At that time, the boundary conditions switched to extension. Finally, we propose a model for the exhumation of HP-LT units accounting for these data. We also consider the rheological implications of the syn-orogenic structuration of the Aegean wedge on the post-orogenic evolution. B. Huet, L. Labrousse, and L. Jolivet [2009] Thrust or detachment? Exhumation processes in the Aegean: Insight from a field study on Ios (Cyclades, Greece), Tectonics, 28, 3, doi:10.1029/2008TC002397.
EGU General Assembly
Vienne, Austria

insu-00839054
https://hal-insu.archives-ouvertes.fr/insu-00839054
BIBCODE : 2010EGUGA..1214098H

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
From outcrops located in Provence (South-East France), we describe the distribution, the microstructures, and the petrophysical properties of deformation band networks related to both contractional and extensional tectonic events. In contraction, pervasively distributed networks of reverse-sense compactional shear bands are observed in all folded sand units of the foreland, whereas localized networks of clustered reverse-sense shear bands are only observed close to a large-scale thrust. In extensional setting, networks of clustered normal-sense shear bands are generally observed adjacent to map-scale faults (100 m–10 km scale), although some randomly distributed bands are also observed between these faults. Normal-sense cataclastic faults, i.e. zone of deformation bands containing a localized slip-surface, are also observed to be restricted to sand units, suggesting that faults initiated in the sands during extension, but not during contraction. Shear bands and faults show cataclastic microstructures with high-permeability reduction whereas compactional shear bands show crush microbreccia or protocataclastic microstructures with moderate permeability reduction. This basin-scale analysis underlines the major role of tectonic settings (thrust-fault versus normal-fault andersonian-stress regime) and the influence of inherited large-scale faults on the formation/localization of low-permeability shear bands. We also provide a geometrical analysis of the band network properties (spacing, thickness, shear/compaction ratio, degree of cataclasis, petrophysical properties) with respect to the median grain size, porosity and grain sorting of host sand. This analysis suggests that grain size, although less important than stress-state conditions and the presence of large-scale faults, has a non-negligible effect on band network geometry. No correlations are observed between the grain sorting, porosity and band network geometry.
ISSN: 0264-8172

hal-01116421
https://hal.archives-ouvertes.fr/hal-01116421
DOI : 10.1016/j.marpetgeo.2013.12.020

Éditeur(s) : Oxford Univ Press
Résumé : This study presents the results of a deep seismic survey across the north Algerian margin, based on the combination of 2-D multichannel and wide-angle seismic data simultaneously recorded by 41 ocean bottom seismometers deployed along a north-south line extending 180 km off Jijel into the Algerian offshore basin, and 25 land stations deployed along a 100-km-long line, cutting through the Lesser Kabylia and the Tellian thrust-belt. The final model obtained using forward modelling of the wide-angle data and pre-stack depth migration of the seismic reflection data provides an unprecedented view of the sedimentary and crustal structure of the margin. The sedimentary layers in the Algerian basin are 3.75 km thick to the north and up to 4.5-5 km thick at the foot of the margin. They are characterized by seismic velocities from 1.9 to 3.8 km s(-1). Messinian salt formations are about 1 km thick in the study area, and are modelled and imaged using a velocity between 3.7 and 3.8 km s(-1). The crust in the deep sea basin is about 4.5 km thick and of oceanic origin, presenting two distinct layers with a high gradient upper crust (4.7-6.1 km s(-1)) and a low gradient lower crust (6.2-7.1 km s(-1)). The upper-mantle velocity is constrained to 7.9 km s(-1). The ocean-continent transition zone is very narrow between 15 and 20 km wide. The continental crust reaches 25 km thickness as imaged from the most landward station and thins to 5 km over a less than 70 km distance. The continental crust presents steep and asymmetric upper- and lower-crustal geometry, possibly due to either asymmetric rifting of the margin, an underplated body, or flow of lower crustal material towards the ocean basin. Present-time deformation, as imaged from three additional seismic profiles, is characterized by an interplay of gravity-driven mobile-salt creep and active thrusting at the foot of the tectonically inverted Algerian margin.
Geophysical Journal International (0956-540X) (Oxford Univ Press), 2014-09 , Vol. 198 , N. 3 , P. 1486-1503

Droits : 2014 The Royal Astronomical Society
http://archimer.ifremer.fr/doc/00217/32836/32150.pdf
DOI:10.1093/gji/ggu179
http://archimer.ifremer.fr/doc/00217/32836/

Éditeur(s) : HAL CCSD
Résumé : International audience
Two opposing visions of the Aegean backarc tectonics implicitly contain contrasting images of the rheological behaviour of the lihosphere, supported by different sets of observations. The propagation of the NAF and extension in the Corinth Rift suggest a strongly localising rheology whereas the formation of MCC in the Cyclades and the Rhodope suggests instead a more viscous behaviour. This paradox was the seminal question addressed by the ANR-EGEO programme (2007-2010) that leads to the following conclusions: (1) The exhumation of the Cycladic MCC's is accommodated by the N-dipping North Cycladic Detachment System (NCDS) that partly reworks the Vardar suture and at the base by a series of thrusts, including the basal contact of the Cycladic Blueschists (CBS) over the Cycladic Basement (CB). The activity of LANF is due to the reactivation of pre-existing discontinuities such as thrusts or earlier detachments and much less to the interaction with granitic plutons. (2) Exhumation in the Cyclades has proceeded in two stages: (a) Eocene syn-orogenic exhumation within the subduction lower/upperplate interface while the post-orogenic Rhodope MCC formed further north, (b) Oligo-Miocene post-orogenic extension in an MCC mode coeval with syn-orogenic exhumation in Crete and the Peloponnese. (3) Both stages were associated with slab retreat, as early as the Eocene with an acceleration at 30-35 Ma. (4) The localisation of the presently active steeply-dipping normal faults on the southern margin of the Corinth Rift may have been preceded by a partial reworking of thrusts and syn-orogenic detachments by shallow-dipping decollements. (5) The localisation of the NAF in the Marmara Sea region and the Northern Aegean Sea is now accurately dated between 5.3 and 5 Ma Ma using the erosion and deposition surfaces that mark the Messinian salinity Crisis and nannofossils ages. (6) The formation of MCCs in the Cyclades resulted in the draining of the low viscosity lower crust from the northern Aegean Sea and led to an easier coupling between upper mantle and upper crust, easing the localisation and propagation of the NAF. (7) A comparison between crustal and mantle finite strain suggests that mantle flow due to slab retreat controls the stretching of the crust. Our model involves progressive slab retreat and mantle flow below the overriding plate inducing the observed succession of tectonic episodes with a progressive localisation of extension due to several slab tearing events. There is no paradox in the tectonic history and rheological behaviour of the Aegean lithosphere but an evolution of the kinematic boundary conditions due to slab deformation at depth.
American Geophysical Union
San Francisco, United States

insu-00860518
https://hal-insu.archives-ouvertes.fr/insu-00860518
BIBCODE : 2010AGUFM.T13G..04J

Éditeur(s) : HAL CCSD
Résumé : International audience
In the frame of the Africa-Europe convergence, the Mediterranean tectonic system presents a complex interaction between subduction rollback and upper-plate deformation during the Tertiary. The western Mediterranean is characterized by the exhumation of the largest subcontinental mantle massif worldwide (the Ronda Peridotite) and a narrow arcuate geometryacross the Gibraltar arc within the Betic-Rif belt (the internal part being called the Alboran domain), where the relationship between slab dynamics and surface tectonics is not well understood. New structural and geochronological data are used to argue for 1/ hyperstrechting of the continental lithosphere allowing extensional mantle exhumation to shallow depths, followed by 2/ lower miocene thrusting. Two Lower Miocene E-W-trending strike-slip corridors played a major role in the deformation pattern of the Alboran Domain, in which E-W dextral strike-slip faults, N60°-trending thrusts and N140°-trending normal faults developed simultaneously during dextral strike-slip simple shear. The inferred continuous westward translation of the Alboran Domain is accommodated by a major E-W-trending lateral ramp (strike-slip) and a N60°-trending frontal thrust. At lithosphere-scale, we interpret the observed deformation pattern as the upper-plate expression of a lateral slab tear and of its westward propagation since Lower Miocene. The crustal emplacement of the Ronda Peridotites occurred at the onset of this westward motion.The Miocene tectonics of the western Alboran is therefore marked by the inversion of a continental rift, triggered by shortening of the upper continental plate and accommodated by E-W dextral strike-slip corridors. During thrusting and westward displacement of the Alboran domain with respect to Iberia, the hot upper plate, which involved the previously exhumed sub-continental mantle, underwent fast cooling.
AGU Fall Meeting 2015
San Francisco, United States

insu-01242043
https://hal-insu.archives-ouvertes.fr/insu-01242043

Éditeur(s) : HAL CCSD Springer Verlag
Résumé : Vertical displacements on the SW-NE T (e) over capt fault (Eastern Pyrenees Axial Zone, France), which separates the Variscan Canigou-Caranca and Mont-Louis massifs, were constrained using a thermochronologic multi-method approach. Ar-40/Ar-39 data from the granitic Mont-Louis massif record its Variscan cooling history and reveal no ages younger than Early Cretaceous, while the Canigou-Caranca gneiss massif records systematically younger Ar-40/Ar-39 ages. These younger Ar-40/Ar-39 ages in the Canigou-Caranca gneiss massif are the result of partial to total rejuvenation of argon isotopic systems related to a thermal flow coeval with the Cretaceous HT-BP metamorphism in the North Pyrenean Zone. Only the deepest rocks from the Canigou-Caranca suffered this extensive Mid-Cretaceous thermal overprint probably due to differential burial around 4 km at that time. The post Mid-Cretaceous vertical displacements along the T (e) over capt fault are recorded by "low" temperature thermochronology using K-feldspar Ar-40/Ar-39, zircon and apatite fission track and (U-Th)/He datings. The Mont-Louis granite samples experienced a long period of protracted cooling reflecting a lack of thermo-tectonic activity in this area from Late Palaeozoic to Early Cenozoic, followed by cooling from 55-60 Ma to Late Eocene at a mean rate of 15-20 degrees C/Ma in the final stage. This cooling stage corresponds to T (e) over capt fault reactivation with a reversed component, promoting exhumation of the Mont-Louis roof zone contemporaneously with the south-vergent Pyrenean thrusting. In the Canigou-Caranca massif, the main cooling event occurred from 32 to 18 Ma at a maximum rate of 30 degrees C/Ma during Early Oligocene followed by a more moderate rate of 3 degrees C/Ma from Late Oligocene to Early Burdigalian, coeval with the normal reactivation of the T (e) over capt fault in brittle conditions that accommodated the final exhumation of the massif during the opening of the Gulf of Lion.
ISSN: 1437-3254

hal-00411442
https://hal.archives-ouvertes.fr/hal-00411442
DOI : 10.1007/s00531-007-0179-x

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The Gibraltar arc, spans a complex portion of the Africa-Eurasia plate boundary marked by slow oblique convergence and intermediate and deep focus seismicity. The seemingly contradictory observations of a young extensional marine basin surrounded by an arcuate fold-and-thrust belt, have led to competing geodynamic models (delamination and subduction). Geophysical data acquired in the past decade provide a test for these models and support a narrow east-dipping, subduction zone. Seismic refraction studies indicate oceanic crust below the western Gulf of Cadiz. Tomography of the upper mantle reveals a steep, east-dipping high P-wave velocity body, beneath Gibraltar. The anisotropic mantle fabric from SKS splitting shows arc-parallel "fast directions", consistent with toroidal flow around a narrow, westward retreating subducting slab. The accompanying WSW advance of the Rif-Betic mountain belt has constructed a thick pile of deformed sediments, an accretionary wedge, characterized by west-vergent thrust anticlines. Bathymetric swath‐mapping images an asymmetric embayment at the deformation front where a 2 km high basement ridge has collided. Subduction has slowed significantly since 5 Ma, but deformation of recent sediments and abundant mud volcanoes suggest ongoing activity in the accretionary wedge. Three possible origins for this deformation are discussed; gravitational spreading, overall NW-SE convergence between Africa and Iberia and finally a WSW tectonic push from slow, but ongoing roll-back subduction. In the absence of arc volcanism and shallow dipping thrust type earthquakes, evidence in favor of present-day subduction can only be indirect and remains the object of debate. Continued activity of the subduction offers a possible explanation for great (M > 8.5) earthquakes known to affect the area, like the famous 1755 Great Lisbon earthquake. Recent GPS studies show SW motion of stations in N Morocco at velocities of 3-6 mm/yr indicating the presence of an independent block, a "Rif-Betic-Alboran" microplate, situated between Iberia and Africa.
ISSN: 0040-1951

insu-00769762
https://hal-insu.archives-ouvertes.fr/insu-00769762
DOI : 10.1016/j.tecto.2012.08.038

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Tectonically controlled landforms develop morphologic features that provide useful markers to investigate crustal deformation and relief growth dynamics. In this paper, we present results of morphotectonic experiments obtained with an innovative approach combining tectonic and surface processes (erosion, transport, and sedimentation), coupled with accurate model monitoring techniques. This approach allows for a qualitative and quantitative analysis of landscape evolution in response to active deformation in the three end-member geological settings: compression, extension, and strike–slip.Experimental results outline first that experimental morphologies evolve significantly at a short time scale. Numerous morphologic markers form continuously, but their lifetime is generally short because erosion and sedimentation processes tend to destroy or bury them. For the compressional setting, the formation of terraces above an active thrust appears mainly controlled by narrowing and incision of the main channel through the uplifting hanging-wall and by avulsion of deposits on fan-like bodies. Terrace formation is irregular even under steady tectonic rates and erosional conditions. Terrace deformation analysis allows retrieving the growth history of the structure and the fault slip rate evolution. For the extensional setting, the dynamics of hanging-wall sedimentary filling appears to control the position of the base level, which in turn controls footwall erosion. Two phases of relief evolution can be evidenced: the first is a phase of relief growth, and the second is a phase of upstream propagation of topographic equilibrium that is reached first in the sedimentary basin. During the phase of relief growth, the formation of triangular facets occurs by degradation of the fault scarp, and their geometry (height) becomes stationary during the phase of upstream propagation of the topographic equilibrium. For the strike–slip setting, the complex morphology of the wrench zone, composed of several interacting fault segments, enhances the interactions with the drainage network. Because of the widening of the main fault zone toward the surface, a significant amount of distributed deformation is observed along the wrench zone. Locally, where two terminations of fault segments interact, less than a quarter of the far field displacement can remain measurable using fault offsets, leading to a systematic underestimation of the real fault slip rate.These different experimental examples illustrate the great potential of the approach coupling deformation mechanisms and erosion–transport–sedimentation processes to investigate qualitatively and quantitatively the morphotectonic evolution of tectonically controlled landscapes.
ISSN: 0169-555X

hal-01243587
https://hal.archives-ouvertes.fr/hal-01243587
DOI : 10.1016/j.geomorph.2015.02.011

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Located on the margin of the west Alboran basin, the Gibraltar Arc (Betic-Rif mountain belt) displays post-Pliocene vertical movements evidenced by uplifted marine sedimentary basins and marine terraces. Quantification of vertical movements is an important clue to understand the origin of present-day relief generation in the Betic-Rif mountain chain together with the causes of the Messinian Salinity Crisis. In this paper, we present the results of a pluridisciplinary study combining an analysis of low temperature thermochronology and Pliocene basins evolution to constrain the exhumation history and surface uplift of internals units of the Rif belt (Northern Morocco). The mean (U-Th)/He apatite ages obtained from 11 samples are comprised between 14.1 and 17.8 Ma and display a wide dispersion, which could be explained by a great variability of apatite chemistries in the analyzed samples. No correlations between altitude and age have been found along altitudinal profile suggesting a rapid exhumation during this period. Thermal modeling using our (U-Th)/He apatite ages and geochronological data previously obtained in the same area (40Ar/39Ar and K/Ar data on biotite, zircon and apatite fission track) allow us to propose a cooling history. The rocks suffered a rapid cooling at 60-100 °C/Ma between 22.5 and 19 Ma, then cooled to temperatures around 40 °C between 19 and 18 Ma. They were re-heated at around 110 °C between 18 and 15 Ma then rapidly cooled and exhumed to reach the surface temperature at around 13 Ma. The re-heating could be related to a renewal in thrusting and burying of the inner zones. Between 15 and 13 Ma the cooling resumed at a rate of 50 °C/Ma indicating an exhumation rate of 0.8 mm/y considering an average 40 °C/km geothermal gradient. This exhumation may be linked to the extension in the Alboran Sea. Otherwise biostratigraphic and sedimentological analysis of Pliocene basins of the internal Rif provided informations on the more recent events and vertical movements. Pliocene deposits of the Rifian coast represent the passive infilling of palaeo-rias between 5.33 and 3.8 Ma. The whole coastal area was uplifted at slow average rates (0.01-0.03 mm/y) in relation with a northeastward tilting of 0.2-0.3° since the Lower-Pliocene. A late Pliocene to present extensional tectonics associated to uplift has been identified all along the coastal ranges of the Internal Zone of the Rif chain. This extension was coeval with the major late Pliocene to Pleistocene extensional episode of the Alboran Sea and appears to be still active nowadays. No significant late Messinian uplift was evidenced, thus calling into question the geodynamic models relating the closure of the marine gateways and the MSC to slab roll back.
ISSN: 0264-3707

hal-01053531
https://hal.archives-ouvertes.fr/hal-01053531
DOI : 10.1016/j.jog.2014.01.006

Éditeur(s) : HAL CCSD American Geophysical Union (AGU)
Résumé : International audience
Detailed seafloor mapping in the area east of Taiwan revealed trench-parallel stretching and folding of the Ryukyu forearc and lateral motion of the accretionary wedge under oblique convergence. East of 122ø40'E, a steep accretionary wedge is elongated in an E-W direction. A major transcurrent right-lateral strike-slip fault accommodates the strain partitioning caused by an oblique convergence of 40 ø. A spectacular out-of-sequence thrust may be related to the subduction of a structural high lying in the axis of the N-S trending Gagua Ridge. This asperity is likely responsible for the uplift of the accretionary wedge and forearc basement and may have augmented strain partitioning by increasing the coupling between the two plates. West of 122ø40'E, the low-taper accretionary wedge is sheared in a direction subparallel to the convergence vector with respect to the Ryukyu Arc. The bayonet shape of the southern Ryukyu Arc slope partly results from the recent (re)opening of the southern Okinawa Trough at a rate of about 2 to 4 cm/yr. Right-lateral shearing of the sedimentary forearc with respect to the nonlinear Ryukyu backstop generates trench-parallel extension in the forearc sediment sequence at dilational jogs and trench-parallel folding at compressive jogs. The Hoping Basin lies above a diffuse trench/trench/fault (TTF) or TFF unstable triple junction moving toward the south along a N-S transform zone which accommodates the southward drift of the Ryukyu Arc with respect to Eurasia.
ISSN: 0278-7407

hal-01261555
https://hal.archives-ouvertes.fr/hal-01261555
https://hal.archives-ouvertes.fr/hal-01261555/document
https://hal.archives-ouvertes.fr/hal-01261555/file/Lallemand_et_al-1999-Tectonics.pdf
DOI : 10.1029/1998TC900011

Éditeur(s) : HAL CCSD
Résumé : International audience
Sub-continental lithospheric mantle rocks are exhumed at the foot of magma-poor distal passive margins as aresponse to extreme stretching of the continental crust during plate separation. Remnants of the Northern Iberianpaleo-passive margin are now exposed in the North-Pyrenean Zone (NPZ) and represent field analogues to studythe processes of continental crust thinning and subcontinental mantle exhumation. The NPZ results from theinversion of basins opened between the Iberia and Europa plates during Albo-Cenomanian times. In the westernNPZ, the ‘Chaînons Béarnais’ ranges display a fold-and-thrust structure involving the Mesozoic sedimentarycover, decoupled from its continental basement and associated with peridotite bodies in tectonic contact withPalaeozoic basement lenses of small size. Continental extension developed under hot thermal conditions, asdemonstrated by the syn-metamorphic Cretaceous ductile deformation affecting both the crustal basement and theallochthonous Mesozoic cover.In this study, we present structural and geochemical data providing constraints to reconstruct the evolution ofthe northern Iberia paleo-margin. Field work confirms that the pre-rift Mesozoic cover is intimately associatedto mantle rocks and to thin tectonic lenses of crustal basement. It also shows that the pre-rift cover was detachedfrom its bedrock at the Keuper evaporites level and was welded to mantle rocks during their exhumation atthe foot of the hyper-extended margin. The crust/mantle detachment fault is a major shear zone characterizedby anastomosed shear bands defining a plurimetric phacoidal fabric at the top of the serpentinized mantle. Thedetachment is marked by a layer of metasomatic rocks, locally 20 meters thick, made of talc-chlorite-pyrite-richrocks that developped under greenschist facies conditions. Raman Spectroscopy on Carbonaceous Materials(RSCM), performed on the Mesozoic cover reveal that the entire sedimentary pile underwent temperatures rangingbetween 200C and 480C.We show that: (i) at the site of mantle rocks exhumation, the boudinaged pre-rift sediments have undergone drasticsyn-metamorphic thinning with the genesis of a S0/S1 foliation and, (ii) the Paleozoic basement has been ductilelydeformed, into thin tectonic lenses that remained welded to the exhumed mantle rocks. Therefore the overallcrustal rheology appears dominated by shallow levels having a ductile behavior. This rheology is related to thepresence of a thick pre- and syn-rift decoupled cover acting as an efficient thermal blanket. This new geologicaldata set highlights important characteristics of ductile-type hyper-extended passive margin that cannot be obtainedfrom the study of seismic lines. Finally, we stress that studying field analogues represents a major tool to betterunderstand the mechanisms of extreme crustal thinning associated with mantle exhumation and their structuralinheritance during tectonic inversion.
Geophysical Research Abstracts
Vienne, Austria

insu-01510103
https://hal-insu.archives-ouvertes.fr/insu-01510103

Éditeur(s) : HAL CCSD Taylor & Francis
Résumé : The Latest Cretaceous/Paleocene paleokarsts from Bas-Languedoc (South of France) are characterized by : 1) exokarstic paleosurfaces (sink holes, pinnacles, canyons) which are mostly superimposed onto the Late Jurassic limestones and partly filled up with breccias and sandy clays containing Paleocene planktonic foraminifera; 2) endokarstic cavities filled up by sandy pelites and laminated mudstones with similar micropaleontological assemblage. All these cavities constitute three cut-and-filled paleokarstic systems. A general model of formation for this polyphase system is proposed. These paleosurfaces are generated by a Latest Cretaceous tectonic phase and Paleocene movements associated with eustatic rises inducing rapid floodings. During Upper Danian-Lower Selandian times three successive base levels drops, whose cumulated duration could be as long as 3 Ma, have induced several hundred metres of incisions within the exposed Jurassic carbonate series. A paleogeographic reconstruction shows three main marine gulfs which extend towards NE the EW Pyrenean thrust belt ("Pyrenean Paleocene Trough", PPT) located on the axis of the future Pyrenees. The similarity of the facies and micropaleontological content in the two domains suggests connexions between the marine Paleocene deposits of Bas-Languedoc and the PPT. It could thus explain the succession of the same tectono-eustatic events. We propose, as an hypothesis, that the rapid sea-level changes, as recorded by the imbricated karstic paleomorphologies, could be induced by the closing and the opening of a strait in the Eastern part of the PPT acting as a sill. This would be controlled by tectonic movements along the active orogenic axis of the Pyrenean Range and eustatic variations of the Paleocene World Ocean. The karstic systems developed during these low-stand episodes may have been later reactivated after the Early Selandian and more specifically during the Messinian desiccation event. This late evolution may have generated deep flooded karsts, now situated below the present sea level. Such karsts, partly inherited from Paleocene, could be important aquifers of economic interest.
ISSN: 0985-3111

hal-00407601
https://hal.archives-ouvertes.fr/hal-00407601
DOI : 10.3166/ga.20.301-326

Éditeur(s) : HAL CCSD Société géologique de France
Résumé : New-Caledonia island consists of an ultramafic nappe thrusted over a continental and arc-derived basement as the result of the closure of a back-arc basin during the upper Eocene. The morphology of New-Caledonia is mostly characterized by its elongated shape and rectilinear coastline. Indeed, the western and eastern edges of the island are delineated by N140 trending normal faults that are well imaged on seismic lines. Major tectonic lineaments onland, including the scarps corresponding to the main boundary of the ultramafic nappe, also trend N140 suggesting a morphotectonic control by faults having similar kinematics (longitudinal flexure-fault of previous authors). We provide detailed observations from some of these scarps demonstrating indeed that these are not erosional features in origin. We explore the possibility that such surfaces do represent major tectonic limits that accommodated extension and significant tectonic thinning of both the peridotite nappe and its basement. Remnants of a complex extensional fault zone, 200 m wide, are still preserved along the western scarp of the Mont Dore mountain, close to Noumea city. The deformed zone is composed of an early shallow dipping detachment fault, some decimeters thick, offset by a group of late high angle normal faults and is bounded by cataclastic breccias that progressively pass into the fractured host peridotite. The late high angle fault zones have been the site of important syn-tectonic fluid circulation and are underlined by cm-thick silica infills bearing vertical striae. Typical morphology of the main scarps with break of slope is related to the combination of high angle normal faults and low angle detachment. Similar shallow dipping detachment surfaces have been observed along the east coast of southern New-Caledonia as well as within the ultramafic nappe itself and its basement. This study confirms that N140 oriented, large fault zones, with pure-normal to transtensional component of displacement, controlled the morphotectonic evolution of New-Caledonia at the regional scale, after the obduction of ophiolite nappe at the end of the Eocene. Such a fact has to be taken into account when attempting to reconstruct the post-obduction evolution of the island and more particularly when considering the development and distribution of the Ni-rich lateritic surfaces.
EISSN: 1777-5817

hal-00411855
https://hal.archives-ouvertes.fr/hal-00411855
DOI : 10.2113/gssgfbull.179.3.315

Éditeur(s) : HAL CCSD American Geophysical Union (AGU) American Geophysical Union
Résumé : International audience
GPS data reveal that the Brahmaputra Valley has broken from the Indian Plate and rotates clockwise relative to India about a point a few hundred kilometers west of the Shillong Plateau. The GPS velocity vectors define two distinct blocks separated by the Kopili fault upon which 2–3 mm/yr of dextral slip is observed: the Shillong block between longitudes 89 and 93°E rotating clockwise at 1.15°/Myr and the Assam block from 93.5°E to 97°E rotating at ≈1.13°/Myr. These two blocks are more than 120 km wide in a north-south sense, but they extend locally a similar distance beneath the Himalaya and Tibet. A result of these rotations is that convergence across the Himalaya east of Sikkim decreases in velocity eastward from 18 to ≈12 mm/yr and convergence between the Shillong Plateau and Bangladesh across the Dauki fault increases from 3 mm/yr in the west to >8 mm/yr in the east. This fast convergence rate is inconsistent with inferred geological uplift rates on the plateau (if a 45°N dip is assumed for the Dauki fault) unless clockwise rotation of the Shillong block has increased substantially in the past 4–8 Myr. Such acceleration is consistent with the reported recent slowing in the convergence rate across the Bhutan Himalaya. The current slip potential near Bhutan, based on present-day convergence rates and assuming no great earthquake since 1713 A.D., is now ~5.4 m, similar to the slip reported from alluvial terraces that offsets across the Main Himalayan Thrust and sufficient to sustain a Mw ≥ 8.0 earthquake in this area.
ISSN: 0148-0227

hal-01115084
https://hal.archives-ouvertes.fr/hal-01115084
DOI : 10.1002/2014JB011196

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
The outstanding exposure of deformation bands in a multilayer sequence of the Orange quarry, Provence, France, motivates a study investigating the development and controls of deformation band geometries by field mapping combined with finite element modeling. Field mapping yields new insights into angular relations between, and evolution of, the deformation bands as well as provides input parameters for the setup and boundary conditions of the numerical simulations using ADELI 2D. In particular, reverse-sense deformation bands are found to have developed within three of the four exposed layers of the multilayer stack with similar orientations to bedding, indicating layer-parallel contraction. Numerical simulations, carried out as a parametric study to investigate the influence on deformation band development and geometry, successfully reproduce the sequential development of deformation bands in the three layers as seen in the field as well as recreate the observed angular geometries of similar to 39 degrees to the maximum compression. This angular relationship is put into context with observations from other field studies and theoretical values to explore controls of deformation band orientations. Furthermore, band localization is impeded in the model by increased layer cohesive strength, demonstrating the importance of host-rock property variations on where localization of bands within the multilayer sequence. Results from both field investigation and numerical simulations are consistent with regional tectonics, where the strata underwent gentle folding due to thrust faulting at depth, and bring further insight into the development and geometry of deformation bands in both extensional and contractional tectonic regimes.
ISSN: 0148-0227

hal-00639452
https://hal.archives-ouvertes.fr/hal-00639452
DOI : 10.1029/2011JB008365