Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
We explore the relations between deformation, annealing, and melt percolation during rifting and the effect of these processes on seismic anisotropy by analyzing the microstructures and crystal preferred orientations (CPO) in a suite of mantle xenoliths from Mega, in the southern end of the Ethiopian rift. Previous geochemical studies on these xenoliths showed evidence for interactions with variable melt types and volumes during the rifting process. The peridotites have dominantly coarse-porphyroclastic microstructures, but coarse granular or partially recrystallized microstructures also occur. The olivine CPO, characterized by orthorhombic to fiber-[100] patterns and moderate intensities, the common occurrence of (100) tilt walls, and the predominance of <0vw> rotation axes accommodating low angle misorientations in olivine support deformation by dislocation creep with dominant activation of the [100](010) system. Annealing (static recrystallization) of variable intensity followed this deformation. Modal enrichment in pyroxenes in > 60% of the studied peridotites corroborates extensive, but spatially heterogeneous reactive melt percolation leading to refertilization of the lithospheric mantle beneath the southern Ethiopian rift. The common interstitial shapes of the pyroxenes and lack of correlation between the pyroxenes and the olivine CPOs in many samples suggest that part of the refertilization is post-kinematic. However, there is no simple relation between reactive melt percolation and annealing of the olivine deformation microstructure. Comparison with data from other xenolith localities points to changes in the metasomatic imprint in the lithospheric mantle along the East African rift system correlated with the evolution in the rift maturity. Seismic properties averaged over all samples show typical lithospheric mantle patterns with fast propagation of P- and polarization of the fast S-waves parallel to the lineation. The anisotropy is moderate (< 6% for P-waves and < 4% for S-waves), implying that aligned melt must contribute to the strong seismic anisotropy measured in the Main Ethiopian rift, north of Mega.
ISSN: 0040-1951

hal-01355918
https://hal.archives-ouvertes.fr/hal-01355918
DOI : 10.1016/j.tecto.2016.05.027

Éditeur(s) : Elsevier Science Bv
Résumé : The modern Rhone delta in the Gulf of Lions (NW Mediterranean) is a typical wave-dominated delta that developed after the stabilization of relative sea level following the last deglacial sea-level rise. Similar to most other deltas worldwide, it displays several stacked parasequences and lobes that reflect the complex interaction between accommodation, sediment supply and autogenic processes on the architecture of a wave-dominated delta. The interpretation of a large set of newly acquired very high-resolution seismic and sedimentological data, well constrained by 14C dates, provides a refined three-dimensional image of the detailed architecture (seismic bounding surfaces, sedimentary facies) of the Rhone subaqueous delta, and allows us to propose a scenario for delta evolution during the last deglaciation and Holocene. The subaqueous delta consists of “parasequence-like” depositional wedges, a few meters to 20–30 m in thickness. These wedges first back-stepped inland toward the NW in response to combined global sea-level rise and overall westward oceanic circulation, at a time when sediment supply could not keep pace with rapid absolute (eustatic) sea-level rise. At the the Younger Dryas-Preboreal transition, more rapid sea-level rise led to the formation of a major flooding surface (equivalent to a wave ravinement surface). After stabilization of global sea level in the mid-Holocene, accommodation became the leading factor controlling delta architecture. An eastward shift of depocenters occurred, probably favoured by higher subsidence rate within the thick Messinian Rhone valley fill. The transition between transgressive (backstepping geometry) and regressive (prograding geometry) (para)sequences resulted in creation of a Maximum Flooding Surface (MFS) that differs from a “classical” MFS described in the literature. It consists of a coarse-grained interval incorporating reworked shoreface material within a silty clay matrix. This distinct lithofacies results from condensation/erosion, which appears as an important process even within supply-dominated deltaic systems, due to avulsion of distributaries. The age of the MFS varies along-strike between ca. 7.8-5.6 kyr cal. BP in relation to the position of depocenters and climatically-controlled sediment supply. The last rapid climate change of the Holocene, the Little Ice Age (1250–1850 AD), had a distinct stratigraphic influence on the architecture and lithofacies of the Rhone subaqueous delta through the progradation of two deltaic lobes. In response to changes in sediment supply linked to rapid climate changes (and to anthropic factors), the Rhone delta evolved from wave-dominated to fluvial dominated, and then wave dominated again.
Sedimentary Geology (0037-0738) (Elsevier Science Bv), 2014-05 , Vol. 305 , P. 35-53

Droits : 2014 Elsevier B.V. All rights reserved.
http://archimer.ifremer.fr/doc/00179/29017/27445.pdf
DOI:10.1016/j.sedgeo.2014.02.004
http://archimer.ifremer.fr/doc/00179/29017/

Éditeur(s) : Elsevier Sci Ltd
Résumé : A multi-scale global hindcast of ocean waves is presented that covers the years 1994-2012, based on recently published parameterizations for wind sea and swell dissipation [Ardhuin, F., Rogers, E., Babanin, A., Filipot, J.-F., Magne, R., Roland, A., van der Westhuysen, A., Queffeulou, P., Lefevre, J.-M., Aouf, L., Collard, F., 2010. Semi-empirical dissipation source functions for wind-wave models: Part I. Definition, calibration and validation. J. Phys. Oceanogr. 40 (9), 1917-1941]. Results from this hindcast include traditional wave parameters, like the significant wave height and mean periods, and we particularly consider the accuracy of the results for phenomenal sea states, with significant heights above 14 m. Using unbiased winds, there is no evidence of a bias in wave heights even for this very high range. Various spectral moments were also validated, including the surface Stokes drift and mean square slopes that are relevant for wave-current interactions modelling and remote sensing, and also spectra of seismic noise sources. The estimation of these parameters is made more accurate by the new wave growth and dissipation parameterizations. Associated air-sea fluxes of momentum and energy are significantly different from what is obtained with the WAM-Cycle 4 parameterization, with a roughness that is practically a function of wind speed only. That particular output of the model does not appear very realistic and will require future adjustments of the generation and dissipation parameterizations.
Ocean Modelling (1463-5003) (Elsevier Sci Ltd), 2013-10 , Vol. 70 , P. 174-188

Droits : 2012 Elsevier Ltd. All rights reserved.
http://archimer.ifremer.fr/doc/00155/26582/25477.pdf
DOI:10.1016/j.ocemod.2012.12.001
http://archimer.ifremer.fr/doc/00155/26582/

Éditeur(s) : HAL CCSD Oxford University Press (OUP)
Résumé : International audience
Upper mantle anisotropy beneath the African IRIS and Geoscope stations is investigated through the measurements of splitting of teleseismic shear waves such as SKS, SKKS and PKS phases. Seismic anisotropy data are interesting on their own as a measure of upper mantle active or frozen deformation beneath a given station, but each station is of potential interest since it can be used to retrieve source-side seismic anisotropy at remote sites if one is able to perform station-side anisotropy correction. We performed systematic investigations of teleseismic shear wave splitting at 15 stations from the IRIS and Geoscope global seismic networks, which are located on both the oceanic and the continental parts of the African plate. Anisotropy is generally well observed at continental stations. The patterns we present generally show much more complexity than the results previously published from smaller data sets. Despite this complexity, the splitting parameters generally appear in several places to contain a signature of the regional geodynamic setting (rift structures, Archaean craton, Pan-African belt), although a deeper source of anisotropy (asthenospheric) may be present. At the oceanic stations, anisotropy measurements are much more difficult to perform because the signal is generally of poor quality. MSEY, in the Seychelles (Indian ocean), is the exception and displays a clear correlation of the azimuth of the fast split shear wave with the trend of the absolute plate motion, as defined by hotspot tracks.
ISSN: 0956-540X

hal-01380389
https://hal.archives-ouvertes.fr/hal-01380389
https://hal.archives-ouvertes.fr/hal-01380389/document
https://hal.archives-ouvertes.fr/hal-01380389/file/Barruol_SKS_afric_GJI2001.pdf
DOI : 10.1046/j.0956-540x.2001.01481.x

Éditeur(s) : Springer
Résumé : The Var turbidite system is a small sandy system located in the Ligurian Basin. It was deposited during the Pliocene-Quaternary in a flat-floored basin formed during the Messinian salinity crisis. The system was fed through time by the Var and Paillon canyons that connect directly to the Var and Paillon rivers. It is still active during the present sea-level highstand. Two main mechanisms are responsible for gravity-flow triggering in the Var turbidite system: (1) mass-wasting events affect mainly the upper part of the continental slope, in areas where volumes of fresh sediment delivered by rivers are highest, and result from the under-consolidation state of slope sediments and earthquakes, and (2) high-magnitude river floods resulting from melting of snow and convective rainfall during fall and spring seasons, and generating hyperpycnal turbidity currents at river mouths when the density of freshwater transporting suspended particles exceeds that of ambient seawater. Failure- and flood-induced gravity flows are involved through time in the construction of the Var Sedimentary Ridge, the prominent right-hand levee of the Var system, and sediment waves. Processes of construction of both the Var Ridge and sediment waves are closely connected. Sandy deposits are thick and abundant in the eastern (downchannel) part of the ridge. Their distribution is highly constrained by the strong difference of depositional processes across the sediment waves, potentially resulting through time in the individualization of large and interconnected sand bodies.
Geo-Marine Letters (0276-0460) (Springer), 2006-12 , Vol. 26 , N. 6 , P. 361-371

Droits : 2006 Springer
http://archimer.ifremer.fr/doc/2006/publication-2258.pdf
DOI:10.1007/s00367-006-0047-x
http://archimer.ifremer.fr/doc/00000/2258/

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Forecasting of sea-state characteristics, with warning time of a few hours, appears a necessity in Operational Oceanography. linking sophisticated marine monitoring systems with forecasting modeling tools. In this paper, instead of using conventional numerical models, a Takagi-Sugeno-rule-based Fuzzy Inference System (FIS) was developed aiming at forecasting wave parameters based on the wind speed and direction, and the lagged-wave characteristics. Initial and final antecedent fuzzy membership functions were identified using the subtractive clustering method. The model was applied on the wind and wave dataset recorded in years 2000-2006 by an oceanographic buoy deployed in the Aegean Sea. The model showed perfect fit for the training period (2000-2005; 12,274 data points), and expanded its hindcasting ability during 2006 (1044 data points), as the verification part of the series. Model results, for a lead time of 3 h, showed good agreement between the predicted and the observed significant wave height (RMSE=0.216) and zero-up-crossing period (RMSE=0.315). According to other model performance criteria, the fuzzy model slightly underpredicted both wave characteristics (the linear regression slope was 0.911 for wave height and 0.788 for wave period), and reduced its forecasting ability at higher prediction intervals (+6 to + 12 h). Overall, model results illustrated that the developed FIS could serve as a valuable tool for the operational prediction of wave characteristics in Northern Aegean Sea, through the utilization of the POSEIDON network.
ISSN: 0029-8018

hal-00456020
https://hal.archives-ouvertes.fr/hal-00456020
DOI : 10.1016/j.oceaneng.2009.08.016

Résumé : La thèse est consacrée à la recherche des catastrophes marines (tsunamis, ondes de tempête) dans les Antilles françaises, en utilisant des modèles analytiques et numériques de mécanique des fluides. L'accent est mis sur le développement de modèles de mouvement de glissements de terrain et des vagues causées par ces glissements. Le modèle le plus simple du glissement de terrain «solide block» est utilisé pour évaluer les caractéristiques des flux pyroclastiques du volcan Soufrière-Hills (Montserrat). Un modèle plus complexe de modélisation de glissement de terrain (modèle de Savage-Hutter) a été étudié analytiquement, donnant ainsi une nouvelle famille de solutions exactes décrivant le mouvement de l'écoulement par gravité non linéaire dans une vallée ou dans un canyon sous-marin. Le modèle comprend des ondes simples (Riemann waves),le cas d'un barrage qui cède (dam-break problem), des solutions auto-similaires dans la M-fonne et « chapeaux paraboliques ». Grâce à la théorie linéaire de l'eau peu profonde nous avons étudié le processus de génération de tsunamis par des glissements de terrain de volume variable, se déplaçant à une vitesse variable dans un bassin de profondeur variable. Dans le cas d'un fond marin particulier (cas sans "réflexion"), les phénomènes de résonnance ont été étudiés dans un bassin à profondeur variable. Nous avons utilisé des méthodes numériques pour la résolution non-linéaire des équations des eaux peu profondes afin d'analyser des catastrophes marines réelles (les ondes de tempête causées par le cyclone Lili en 2002, le tsunami volcanique de 2003 à Montserrat) et probables (un tsunami prés des côtes de la Martinique). Des données sur les catastrophes
The dissertation is devoted to research in the field of marine natural hazards (tsunamis, storm surges) in the French West Indies, using analytical and numerical models of fluid mechanics. Emphasis is placed on the development of models of landslide motion and generated tsunami waves. The simple "solid block" model is used to evaluate the characteristics of pyroclastic flow Soufriere Hills volcano (Montserrat). The "fluid model" of a landslide (so called Savage-Hutter model) is studied analytically; within this model a new family of exact solutions that describe the motion of nonlinear gravity flow in a valley or underwater canyon is found: nonlinear Riemann wave, dan break problem, self-similar solutions (M - wave and parabolic cap). In the framework of the linear shallow water theory the process of generation of tsunami waves by landslides of variable volume moving with variable velocity above the basin of variable depth is studied. For the specific bottom profile ("reflectionless" one) the resonant phenomena is investigated in the basin of variable depth. Numerical methods are used to analyze marine hazards: historical (storm surges, caused by Cyclone LILI in 2002; volcanic tsunami 2003 on Montserrat) and possible events (possible tsunami of the coast of Martinique). Various data on marine natural disasters are obtained during field surveys (volcanic tsunami in 2003, stonn surges caused by Hurricane Dean in 2007). Designed catalogs of tsunamis and storm surges are created based on results of numerical modeling and field studies; some statistical analysis is perfomed

http://www.theses.fr/2011AGUY0435/document

Éditeur(s) : Elsevier
Résumé : High P-wave velocities (7.1-7.8 km/s) lower crustal bodies (LCBs) imaged along volcanic margins are commonly interpreted as plume and break-up-related thick mafic underplating. This interpretation is partly challenged in this paper based on new seismic observations and modelling of the outer Voring Basin (Norway). An exceptional strong amplitude reflection, the T Reflection, is particularly well defined below the North Gjallar Ridge (NGR) between 7 and 8 s TWT. The T Reflection is located near the volcanic lava flows emplaced during the NE Atlantic breakup (similar to 55-54 Ma ago) and coincides with the top of the LCB, forming a mid-crustal dome. Based on structural and temporal relationships, we show that the dome clearly influences the structural development of the NGR and predates the continental breakup at least by 10-15 Ma. Using a thermo-kinematical model, we tried also to investigate and quantify the relationships between the extension, LCB and the magmatic production. Modelling suggests that significant Paleocene-Early Eocene magmatism can be produced without any temperature anomaly in the mantle if differential stretching occurs during the break-up initiation. The conclusion of 2D thermo-kinematical parametric analysis is that the magmatic model predicts, either little extension (beta < 2) with no melting or high extension (beta > 5) with significant melting along the outer Voring Basin. We suggest that the continental part of the LCB could not necessarily be breakup-related and so magmatic, as has often been stated previously. It is concluded here that the continental part of the LCB observed beneath the outer Voring Basin may be partly (or fully) attributed to inherited, high-pressure granulite/eclogite lower crustal rocks. The real amount of mafic material emplaced along the outer Voring Basin could be 20-40% less than thought.
Tectonophysics (0040-1951) (Elsevier), 2006 , Vol. 412 , N. 3-4 , P. 255-278

Droits : 2005 Elsevier B.V. All rights reserved
http://archimer.ifremer.fr/doc/2006/publication-1042.pdf
DOI:10.1016/j.tecto.2005.10.038
http://archimer.ifremer.fr/doc/00000/1042/

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
We performed torsional deformation experiments on pre-hydrated fine-grained olivine aggregates using an innovative experimental assembly to investigate water weakening in mantle rocks at high shear strains. San Carlos olivine powder was cold-pressed and then hot-pressed under hydrous conditions, producing aggregates with average grain sizes of 7 or 15 μm. Deformation experiments were performed in a high-resolution gas-medium apparatus equipped with a torsional actuator, under a confining pressure of 300 MPa, a temperature of 1200 °C, and constant shear strain rates ranging from 8 × 10−5 to 1.4 × 10−4 s−1. Maximum shear stresses range from 150 to 195 MPa. These values are 30% lower relative to those determined in previous torsion experiments on dry, fined-grained dunites under similar conditions. Textures and microstructures of the starting and deformed specimens were characterized by scanning and transmission electron microscopy. All deformed aggregates exhibit a shape-preferred orientation marking a foliation and lineation, as well as a reduction in mean grain size from 15 μm down to 3-4 μm due to dynamic recrystallization. Olivine crystallographic fabrics developed rapidly (γ < 0.1), but their strength, characterized by the J-index, is low compared to naturally deformed peridotites or to polycrystalline olivine deformed at similar finite shear strains under dry conditions. The crystallographic fabrics are consistent with deformation by a dislocation accommodated creep mechanism with activation of multiple {0 k l}[1 0 0] systems, among which the (0 1 0)[1 0 0] slip system is dominant, and minor participation of the (0 1 0)[0 0 1] slip system. Transmission electron microscopy confirmed the occurrence of dislocations with [1 0 0] and [0 0 1] Burgers vectors in most grains. Analysis of unpolarized infrared spectra indicates that hydrogen concentration in the olivine lattice is below the saturation level of 18 ppm wt H2O, which is similar to those typically observed in spinel-bearing peridotite xenoliths, and also provide evidence for water-rich inter-granular material trapped in pores and grain boundaries. Seismic properties computed from the CPO observations correspond to those most commonly observed in naturally deformed mantle peridotites with fast P-wave propagation and S-wave polarization subparallel to the shear direction. These torsion experiments on fine-grained olivine polycrystals under hydrous conditions indicate that water weakening under lithospheric conditions is linked to various defects with hydrogen in the olivine structure, as well as with water-derived species in grain boundaries or pores.
ISSN: 0031-9201

hal-00745170
https://hal.archives-ouvertes.fr/hal-00745170
DOI : 10.1016/j.pepi.2012.05.001

Éditeur(s) : Society for Sedimentary Geology
Résumé : The Kramis deep-sea fan extends over 45 km at the base of the western Algerian continental slope between 2000 and 2550 m water depth and covers an area of approximately 1200 km2. The Kramis Fan was initiated after Messinian time, evolved during the Plio-Quaternary, and, is still active, as proved by submarine cable breaks during the 1954 Orléansville earthquake. The Kramis Fan is fed by two perpendicular canyons: the Kramis Canyon and the Khadra Canyon, merging in a single E–W-oriented channel confined at the foot of the slope. It is strongly asymmetric with a super-developed levee on the right-hand side of the channel, the Kramis Ridge. Based on recent multibeam, side-scan sonar, and sediment core data (Maradja, 2003 and 2005, Prisma, 2004, and Prisme, 2007 cruises), we describe the morphology and internal structure of the fan and particularly the sediment ridge, showing marked lateral changes in the sediment-wave morphology and their association with a series of large scours in the intermediate part of the ridge aligned in the continuity of the Khadra Canyon direction. Overall, the Kramis Ridge is formed by turbidity currents overspilling the ridge crest, which is 100 m above the channel floor, with two exceptions. In the distal part of the ridge the subdued ridge-crest height probably causes continuous overspill, testified by sediment waves migrating parallel to the channel. The scours occur in the intermediate part of the ridge where the ridge height is only 50–60 m; scours are interpreted as the result of cyclic steps due to flow stripping of currents provided by the intersection of the Khadra Canyon with the Kramis Canyon and Channel system. The scours probably postdate the main growth of the Kramis Ridge and induce the local erosion of the ridge, which could correspond to a new channel initiation cutting the ridge. The superposition or the interaction of flows with different directions is responsible of the amplification of the size of the sediment waves with erosional downside flanks and their transformation in scours. The Kramis Fan provides a clear example of flow interaction to explain the presence of large sediment waves and scours on modern submarine fans.
SEPM Special Publication (1060-071X) (Society for Sedimentary Geology), 2012 , Vol. 99 , P. 293-308

Droits : 2012 SEPM (Society for Sedimentary Geology)
http://archimer.ifremer.fr/doc/00129/24021/21978.pdf
http://archimer.ifremer.fr/doc/00129/24021/

Éditeur(s) : HAL CCSD Oxford University Press (OUP)
Résumé : International audience
We performed forward modelling of seismic anisotropy beneath a migrating strike-slip plate boundary to: (1) test if such a geodynamic context might explain teleseismic shear wave splitting data in the vicinity of the central part of the San Andreas Fault and (2) constrain the power of such data to unravel vertical and lateral variations in deformation patterns in the upper mantle. The modelling involves five steps: (1) thermomechanical modelling, using a finite-element code, of the deformation field, (2) viscoplastic self-consistent modelling of the resulting olivine and pyroxene crystal preferred orientations, (3) calculation of the elasticity tensors for different domains of the finite elements (FEs) model, (4) forward modelling of seismic wave propagation through the model using ray theory, finite-frequency theory and a full-wave approach and (5) performing splitting measurements on the synthetic seismograms. SKS splitting data in central California are best fitted by a model with a hotter geotherm within 60 km of the plate boundary accounting for the opening of an asthenospheric window due to the northward migration of the Mendocino Triple Junction. The westward motion of the plate boundary cannot however explain the rotation of fast polarization directions east of the San Andreas Fault in central California. Comparison between modelled and measured individual shear wave splitting also implies that the homogeneity of the two-layer models accounting for the observations in the vicinity of the San Andreas Fault indicates a sharp transition between lithospheric and asthenospheric deformations beneath this plate boundary. The ability of different synthetic approaches to localize horizontally and vertically the plate boundary-related deformation differs significantly. Splitting in ray theory synthetics closely follow variations in olivine crystallographic preferred orientations in the model. In contrast, splitting analysis on full-wave synthetics, which should be more representative of actual long-period SKS waves, results in smooth apparent lateral variations of anisotropy; the exact location and width of the plate boundary may only be retrieved by comparing fast-polarization profiles obtained using a multichannel analysis on waves with different periods.
ISSN: 0956-540X

hal-01236150
http://hal.univ-reunion.fr/hal-01236150
http://hal.univ-reunion.fr/hal-01236150/document
http://hal.univ-reunion.fr/hal-01236150/file/Bonnin_San_Andreas_modelling_GJI2012.pdf
DOI : 10.1111/j.1365-246X.2012.05650.x

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The paper presents coastal structures design in the presence of waves by the minimization of a cost function. It aims to show that shape optimization can be efficiently applied to ocean engineering. This is an underlying guiding principle for the design of harbors or offshore breakwaters. We compute the solution of a specific simplified boundary value problem describing the short wave propagation toward a vertical sea cliff or vertical wall and modify accordingly the shape of defense structures in order to minimize a pre-defined cost function taking into account the strength (energy) of the water waves. The optimization procedure relies on a global semi-deterministic search algorithm able to escape from local minima.
ISSN: 0378-3839

hal-00411905
https://hal.archives-ouvertes.fr/hal-00411905
DOI : 10.1016/j.coastaleng.2007.06.006

Éditeur(s) : Institut de Ciències del Mar de Barcelona, CSIC
Résumé : Acoustic and core data have recently been collected on the shelf break and the upper part of the slope of the south Aquitaine continental margin. They reveal the major role played by mass-flow gravity processes in deposit erosion and redistribution, modelling of the sea-bed, and transfer of sediment toward the deep-sea. The study region is bounded in the south by the Capbreton canyon. The northern area, which shows a smooth morphology, is characterised by small-scale deformations due to sediment creep or low-amplitude slide processes. The deformations are associated with mini listric-like faults that bound packets of sediments in which the deposit geometry is typical of constructional sediment waves. These sediment waves result from the interaction of depositional and gravity deformation processes. In the southern area, closer to the canyon, wave-like structures are still present but mostly of smaller size. They only result from gravity deformation processes without any evidence of constructional processes. In the vicinity of the Capbreton canyon, the shelf break and upper slope have a much more uneven morphology with sedimentary reliefs, escarpments and depressions directed toward the canyon thalweg. The depressions look like slide scars, and could be the result of regressive slides initiated at the top of the canyon flank. The age of the sliding event responsible for the formation of the depression observed today could be middle to upper Quaternary. Since their formation, these depressions act as conduits that channel the transfer of shelf sediment into the canyon, as demonstrated by the occurrence of a meandering channel on the sea-floor of one depression.
Scientia Marina (0214-8358) (Institut de Ciències del Mar de Barcelona, CSIC), 2006-06 , Vol. 70 , N. 1 , P. 89-100

Droits : 2006 Institut de Ciències del Mar de Barcelona
http://archimer.ifremer.fr/doc/2006/publication-3960.pdf
http://archimer.ifremer.fr/doc/00000/3960/

Éditeur(s) : HAL CCSD AGU and the Geochemical Society
Résumé : International audience
Peridotite xenoliths brought up to the surface by the volcanism of the Kerguelen Islands represent a mantle that has been affected by a high degree of partial melting followed by intense melt percolation above the Kerguelen plume. These xenoliths are therefore particularly suitable to investigate effects of melt-rock interaction on crystallographic fabrics (lattice-preferred orientation (LPO)) of peridotite minerals and on the LPO-induced seismic properties of peridotites above a mantle plume. We have studied a suite of 16 ultramafic samples representative of different degrees of partial melting and magma-rock interaction among which the protogranular harzburgites are the least metasomatised xenoliths and dunites are the ultimate stage of metasomatism. Olivine LPO is characterized by high concentration of [010] axes perpendicular to the foliation and [100] axes close to the lineation or distributed in the foliation plane in harzburgites, whereas the high concentration of [100] axes is parallel to the lineation and [010] axes is perpendicular to the assumed foliation in dunites. Olivine LPO in harzburgites is interpreted as being due to a deformation regime in axial compression or transpression. The fabric strength of olivine decreases progressively from protogranular to poikilitic harzburgites and finally to dunites, for which it remains nevertheless significant (J index 3.8). Seismic properties calculated from LPO of minerals indicate that metasomatism at higher melt/rock ratio lowers the P wave velocities. The most significant difference between harzburgites and dunites corresponds to the distribution of S wave anisotropy. Harzburgites display the maximum of anisotropy within the foliation plane and the minimum of anisotropy perpendicular to the foliation plane, whereas the lowest anisotropy is parallel to the lineation for dunites. These modifications of seismic properties as a result of metasomatic processes may induce seismic heterogeneities in the mantle above the Kerguelen plume. In addition, assuming a lithospheric mantle primarily harzburgitic and structured with a horizontal foliation, the seismic properties calculated for the Kerguelen xenoliths reconcile the rather high anisotropy evidenced by the horizontally propagating surface waves with the apparent isotropy revealed by the absence of splitting of vertically propagating teleseismic SKS waves recorded by the GEOSCOPE Kerguelen station.
ISSN: 1525-2027

hal-00366222
https://hal.archives-ouvertes.fr/hal-00366222
https://hal.archives-ouvertes.fr/hal-00366222/document
https://hal.archives-ouvertes.fr/hal-00366222/file/bascou_Kerguelen_2007GC001879_hal.pdf
DOI : 10.1029/2007GC001879

Éditeur(s) : HAL CCSD
Résumé : The sandy coasts of Languedoc-Roussillon are a zone vulnerable to erosion and flooding. These hazards are generally associated with a combination of natural factors such as waves, wind, rising sea levels and the importance of sediment supply, and are therefore worsened during storms. For the management of such risks, a better knowledge of the hydrodynamic phenomena occuring from the surf zone through to the coastal scale is essential. This need led to the development of a numerical modelling platform consisting of the 3D ocean circulation model Symphonie, usually dedicated to regional and coastal scales, which was modified to include the wave forcing, modeled by the WaveWatch III or Swan models. Using this platform the entire littoral and coastal regions can be accurately represented. The model was tested in several academic cases. Measurements on the barred beach of Sète during the winter of 2008-2009 served to refine the model, which is able to successfully reproduce the characteristics of the currents in coastal areas, drifts or rip currents over more complex bathymetries and also the vertical profiles of currents. To validate the model on the inner-shelf, we compared the simulations with measurements taken during a winter storm in 2004 around the mouth of the Têt river, as well as during storms in 2007 and 2008 in the Gulf of Aigues-Mortes. Currents are generally well reproduced. However, the scope of wave action seems limited to a depth of 30m. The characteristics of our model allow a good reproduction of the currents at all scales and the 3D nature of the model permits a more precise calculation of the shear stress and bottom current responsible, respectively, for the suspension and advection of sediments.
Le littoral sableux du Languedoc-Roussillon est un système vulnérable aux risques d'érosion et de submersion. Ces aléas sont liés à la conjonction des facteurs naturels que sont les vagues, vent, élévation du niveau de la mer et apports sédimentaires et sont donc aggravés en période de tempête. En vue d'une gestion des risques, une meilleure connaissance des phénomènes hydrodynamiques de l'échelle littorale à l'échelle côtière est essentielle. Ce travail a conduit à la réalisation d'une plateforme de modélisation numérique composée du modèle de circulation océanique 3D Symphonie, traditionnellement dédié aux échelles régionales et côtières, qui a été modifié pour inclure le forçage par les vagues, modélisées par les modèles Wavewatch III ou Swan, et ainsi étendre sa validité au littoral. Le modèle a été testé sur des cas académiques littoraux. Des mesures sur la plage à double barres de Sète pendant l'hiver 2008-2009, ont également servi à parfaire le modèle qui reproduit ainsi avec succès les caractéristiques des courants en zone littorale : la dérive, les courants sagittaux sur des bathymétries plus complexes et les profils verticaux des courants. Pour valider le modèle à des échelles plus côtières, nous avons confronté ses résultats à des mesures réalisées pendant une tempête hivernale en 2004 aux alentours de l'embouchure de la Têt, mais également sur des tempêtes de 2007 et 2008 dans le Golfe d'Aigues-Mortes. Les courants sont globalement bien reproduits. Les zones d'action des vagues semblent limitées aux zones de profondeur inférieure à 30 m. Notre modèle autorise une reproduction correcte des courants à toutes les échelles et sa nature 3D permet un calcul plus précis de la tension de cisaillement de fond et du courant près du fond, responsables respectivement de la mise en suspension et de l'advection des sédiments.
https://tel.archives-ouvertes.fr/tel-00680405

tel-00680405
https://tel.archives-ouvertes.fr/tel-00680405
https://tel.archives-ouvertes.fr/tel-00680405v2/document
https://tel.archives-ouvertes.fr/tel-00680405/file/2011_MICHAUD.pdf

Éditeur(s) : HAL CCSD Springer-Verlag
Résumé : The seismology is the most effective method to explore the Structure of subduction zones to great depth. The distinguishing feature of the mantle in the subduction regions is the presence of hydrated phases, which transport water into the Earth's interior and release it with dramatic local consequences, triggering earthquakes and melting. The seismological detection of these hydrous phases and geo-dynamic interpretation of flow in the hydrous mantle depend on knowledge of the anisotropic elastic properties and the characteristics of the wave propagation in anisotropic media. In this paper we briefly recall the distinguishing features of anisotropic wave propagation and the observable parameters. We suggest the Vp/Vs ratio is a physically sound parameter than can be observed by seismology in anisotropic regions of the Earth, whereas the Poisson's ratio, which is often quoted, is not directly observable and does not correspond to the characteristics of wave propagation in an anisotropic or isotropic medium. We report for the first time the ratios of Vp/Vs1 and Vp/Vs2, where Vs1 is the fastest and Vs2 slowest S-wave velocities of an anisotropic media. We present the current knowledge of the anisotropic seismic properties of hydrous minerals in the upper mantle, transition zone, and lower mantle that are stable along low temperature geotherms associated with subduction, and identify which minerals are likely to influence seismological observations because they have very high volume fractions, or very high anisotropies, or both of these.;In the upper mantle antigorite and talc are exceptionally anisotropic (Vp 71% Vs 68% and Vp 65%, Vs 68%, respectively) and chlorite is also very anisotropic for S-waves (Vp 35%, Vs 76%). Comparatively less anisotropic are hornblende (Vp 27%, Vs 31%), used as proxy for tremolite in subduction zones, and clinohumite (21.8%, Vs 15.9%). Brucite at 4 GPa (Vp 26.5%, Vs 30.9%) and the dense hydrogen magnesium silicate (DHMS) phase A at 9GPa (Vp 9.3%, Vs 17.6%) are the only hydrous minerals stable in the upper mantle that have had their elastic properties measured at in situ mantle pressures. Except for the phase A, all these minerals are more anisotropic than olivine for at least one parameter (Vp, Vs, Vp/Vs1, or Vp/Vs2). In the transition zone the major phases hydrous wadsleyite and ringwoodite C have moderate to weak anisotropies (Vp 16.3%, Vs 16.5%, and Vp 1.9%, Vs 4.4%, respectively). The DHMS Superhydrous B has a moderate anisotropy (Vp 6.9%, Vs 11.6%). At greater depth the DHMS phase D Lit 24 GPa (Vp 10.8%, Vs 18.0%) is the only hydrous phase that can transport hydrogen from the transition zone into the lower mantle. The phase D is more anisotropic for S than P waves like many of the hydrous phases. From these data it is clear that hydrous phases are in general very anisotropic. However, pressure can play a strong role in reducing anisotropy. It is the case for brucite and talc, in which increasing pressure from ambient to 4 GPa reduces the anisotropy by about 50% for both P and S waves. In contrast, the anisotropy of the DHMS phase A does not change significantly with pressure.;Our picture of the seismic anisotropy of hydrated minerals remains incomplete; the elastic properties of many have not been measured even at ambient conditions (e.g., 10 angstrom phase and phase E) or not measured in their true elastic symmetry (e.g., clinochlore). The majority of hydrous minerals have not been measured at high pressure. and none related to hydrated mantle have been measured at elevated temperature. We have shown in the few cases where hydrous minerals have been measured as a function of pressure, that this variable has an important effect oil the velocity distribution and in most cases reduces the degree of anisotropy, hence we Would expect seismic anisotropy to play a key role in the determination of the shallow structure of subduction zones in the upper mantle.
Subduction zone geodynamics

hal-00420893
https://hal.archives-ouvertes.fr/hal-00420893

Éditeur(s) : HAL CCSD Oxford University Press (OUP)
Résumé : International audience
Energy dissipation is observed on seismic data when a wave propagates through a porous medium, involving different frequency regimes depending on the nature of rock and fluid types. We focus here on the role of partial fluid saturation in unconsolidated porous media, looking in particular at P-wave phase velocity and attenuation. The study consists in running an experiment in a sand-filled tank partially saturated with water. Seismic propagation in the tank is generated in the kHz range by hitting a steel ball on a granite plate. Seismic data are recorded by buried accelerometers and injecting or extracting water controls the partial saturation. Several imbibition/drainage cycles were performed between the water and gas residual saturations. A Continuous Wavelet Transform applied on seismic records allowed us to extract the direct P-wave at each receiver.We observe an hysteresis in phase velocities and inverse quality factors between imbibition and drainage. Phase velocities and inverse quality factors are then jointly inverted to get a final poro-visco-elastic model of the partially saturated sand that satisfactorily reproduces the data. The model formulation consists in generalizing the Biot theory to effective properties of the fluid and medium (permeability and bulk modulus) in order to properly explain the phase velocity variation as a function of the saturation. The strong level of attenuation measured experimentally is further explained by an anelastic effect due to grain to grain sliding, adding to Biot's losses. This study shows that fluid distribution at microscopic scale has strong influence on the attenuation of direct P-waves at macroscopic scale and confirms that seismic prospection may be a powerful tool for the characterization of transport phenomena in porous media.
ISSN: 0956-540X

hal-00779920
https://hal.archives-ouvertes.fr/hal-00779920
https://hal.archives-ouvertes.fr/hal-00779920/document
https://hal.archives-ouvertes.fr/hal-00779920/file/Barriere_et_al_HAL.pdf
DOI : 10.1111/j.1365-246X.2012.05691.x

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
The three-dimensional S-wave velocity structure beneath the South Pacific Superswell is obtained from joint broadband seismic experiments on the ocean floor and islands. We collected only approximately 800 relative times of long-period teleseismic SH-waves by using a waveform cross-correlation from 76 events occurring from January 2003 to May 2005. We conducted relative time tomography to obtain a 3D structure to depths of 1600 km. In the resultant image, we find a characteristic distribution of low- velocity regions. The most prominent features are a large doughnut-shaped low-velocity region at 800 km depth, and an elongated large low-velocity region beneath the Society to Pitcairn hotspots at 1200 km depth. Our model suggests that a large low shear velocity province rooted in the D00 extends upwards and culminates near the top of the lower mantle beneath the central part of the South Pacific Superswell although its perfect continuity is not still confirmed.
ISSN: 0094-8276

hal-01389114
http://hal.univ-reunion.fr/hal-01389114
http://hal.univ-reunion.fr/hal-01389114/document
http://hal.univ-reunion.fr/hal-01389114/file/Tanaka_PLUME_lower_mantle_GRL2009.pdf
DOI : 10.1029/2009GL037568

Éditeur(s) : Neidine Editeurs
Résumé : The present article introduces and defines what are the rogue or freak waves. After an historical reminder on the recent consideration of their existence, several events of waves having struck big or small ships or still the coastline are presented. A paragraph is dedicated to the scientific explanation of the phenomenon and the difference with other phenomenons such tsunamis or tidal bores is clarified. After a reminder of the international mobilization towards a forecast system, a conclusion focuses on events met in New Caledonian waters and analyzes more exactly testimonies related to this type of phenomenon by trying to clarify their causes.
Le présent article introduit et définit ce que sont les vagues scélérates. Après un rappel historique sur la prise en compte récente de leur existence plusieurs cas de figure de vagues ayant frappé grands ou petits navires ou encore la côte sont présentés.Un paragraphe est consacré à l'explication scientifique du phénomène et la différence avec d'autres cas de figure tels les tsunamis ou les mascarets est explicitée. Après un rappel de la mobilisation internationale vers un système de prévision, une conclusion se focalise sur les cas de figure rencontrés dans les eaux calédoniennes et analyse plus précisément deux témoignages de ce type de phénomène en tentant d'en expliciter les causes.
Tai Kona (2269-7535) (Neidine Editeurs), 2014-02 , N. 7 , P. 26-40

Droits : Tai Kona
http://archimer.ifremer.fr/doc/00186/29724/28142.pdf
http://archimer.ifremer.fr/doc/00186/29724/

Éditeur(s) : Université Paul Sabatier, Toulouse III
Résumé : The marine phytoplankton in the ocean represents only less than 1% of global biomass. Phytoplankton performs half of all photosynthesis. This autotrophic biomass in ocean is then an essential element in the climate regulation through processes as carbon dioxide absorption during the photosynthesis. Therefore, we need to estimate precisely this biomass as well as the processes which affect it. Using remotely sensed data (altimetry and ocean colour) and a coupled physical/biogeochemical model (MERCATOR-OPA/NPZDDON), Rossby waves and their influence on phytoplankton biomass are specifically studied in the North Atlantic Ocean. Their features and their influences on surface chlorophyll concentrations were analysed. Through the different mechanisms identified, we estimated that these waves can induce local increases from 60% to 150% of the estimated primary production.
Même si l'océan ne représente que moins de 1% de la biomasse liée aux plantes sur la terre, il est responsable de près de la moitié de la photosynthèse nette de la biosphère. Cette biomasse est par conséquent un élément essentiel dans la régulation du climat à travers par exemple le cycle océanique du carbone. Il est donc nécessaire d'estimer correctement cette biomasse ainsi que les processus qui l'affectent. A l'aide de données satellites altimétriques et couleur de l'eau et d'un modèle couplé physique/biogéochimie (MERCATOR-OPA / NPZDDON), les ondes de Rossby et leur influence sur cette biomasse sont spécifiquement étudiées dans l'océan Atlantique Nord. Leurs propriétés et leur influence sur les concentrations en chlorophylle de surface sont analysées. Au travers des mécanismes mis en jeu identifiés, nous estimons que ces ondes peuvent entraîner une augmentation locale comprise entre 60% et 150% de la production primaire estimée.

Droits : info:eu-repo/semantics/openAccess
http://archimer.ifremer.fr/doc/2005/these-2454.pdf
http://archimer.ifremer.fr/doc/00000/2454/