Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Rh (Rhesus) is a major blood group system in man, which is clinically significant in transfusion medicine. Rh antigens are carried by an oligomer of two major erythroid specific polypeptides, the Rh (D and CcEe) proteins and the RhAG glycoprotein, that shared a common predicted structure with 12 transmembrane a-helices (M0 to M11). Non erythroid homologues of these proteins have been identified (RhBG and RhCG), notably in diverse organs specialized in ammonia production and excretion, such as kidney, liver and intestine. Phylogenetic studies and experimental evidence have shown that these proteins belong to the Amt/Mep/Rh protein superfamily of ammonium/methylammonium permease, but another view suggests that Rh proteins might function as CO2 gas channels. Until recently no information on the structure of these proteins were available. However, in the last two years, new insight has been gained into the structural features of Rh proteins (through the determination of the crystal structures of bacterial AmtB and archeaebacterial Amt-1. Here, models of the subunit and oligomeric architecture of human Rh proteins are proposed, based on a refined alignment with and crystal structure of the bacterial ammonia transporter AmtB, a member of the Amt/Mep/Rh superfamily. This alignment was performed considering invariant structural features, which were revealed through Hydrophobic Cluster Analysis, and led to propose alternative predictions for the less conserved regions, particularly in the N-terminal sequences. The Rh models, on which an additional Rh-specific, N-terminal helix M0 was tentatively positioned, were further assessed through the consideration of biochemical and immunochemical data, as well as of stereochemical and topological constraints. These models highlighted some Rh specific features that have not yet been reported. Among these, are the prediction of some critical residues, which may play a role in the channel function, but also in the stability of the subunit structure and oligomeric assembly. These results provide a basis to further understand the structure/function relationships of Rh proteins, and the alterations occurring in variant phenotypes.
ISSN: 1246-7820

hal-00112914
https://hal.archives-ouvertes.fr/hal-00112914
DOI : 10.1016/j.tracli.2006.02.001

Éditeur(s) : HAL CCSD
Résumé : The Franceville Basin (2.1 Ga) in southeastern Gabon, hosts a black shale series well preserved (FB Formation) which represents an exceptional example of unmetamorphised Paleoproterozoic sediment strata. This basin includes the protore of one of the largest Mn-oxide laterite ore worldwide, mined by Eramet-Comilog. The aim of this this work is to determine formation conditions of this protore and to characterize the global sedimentary evolution of the FB Formation which include the protore. This 75 m thick protore is constituted of Mn carbonate-rich black shales which represent a potential ore deposit for the future. It was drilled, on the Bangombé plateau, during a recent campaign of 24 boreholes with an average depth of 125 m.Through multidisciplinary study on these cores and key outcrops of the basin, this work focuses on : i) the depositional environment of the Mn-protore and FB Formation ; ii) the processes of formation of the Mn-carbonates at 2.1 Ga and iii) the architecture and distribution of Mn-rich levels of the protore on the Bangombé Plateau.A detailed sedimentological and petrological study allowed us to redefine the division of the FB into nine units, named U1 to U9 from the base to the top. These units show a fine upward cycle up to U5 and a reverse coarse loop until U9. This division leads to a new interpretation to propose an evolution from a shoreface depositional environment controlled by deltaic currents (U1) to an offshore depositional environment with anoxic conditions (U2). In this basin, a system of submarine fan is developed, feeding a network of sand injections (injectites) covering the Bangombé plateau (70 km²) and with a thickness of 150 m affecting U4 to U7, including the Mn-protore. The protore depositional environment formed below the wave base limit (U4, U5 and U6) in a starved basin, controlled by biochemical sedimentation allowed the formation of Mn-carbonates. The end of starved basin, would allow the re-opening of the detrital input into the offshore basin (U7). This basin is then filled by storm bar deposits intersected by deltaic sub-aquatic channels (U8). The U9 unit corresponds to a quiet lagoon environment, allowing the multicellular organism development for the first time on the planet.A geochemical study allowed the characterization of the depositional environment of Mn-carbonates as an anoxic to sub-oxic and alkaline environment. For the first time, we showed that the manganese carbonates, present as bacteriomorph forms, are precipitated from the seawater by the mediated photosynthetic cyanobacterial activity, which allows CO2 / HCO3 depression of the environment and a local increase of pH. The cyanobacterial activity is controlled by the absence of bottom currents, which increase the detrital input. This would stop the activity of the cyanobacteria and thus would lead to the decrease of the Mn-concentration along the protore.Finally, well-log and a sequential correlation analyses allowed us to detail spatial and timing repartition of FB Formation deposit, controlled by a tectono-sedimentary model. We propose two- tectono-sedimentary phases. A first syn-tectonic phase (U1 to U3) controls the depocentres and sedimentation gaps. Turbidite coarse deposits are located in the most subsident part, clay deposits rather on the slope and carbonates on shoals. A second post-tectonic phase (U4 to U7) allows isopach deposits. The Mn-protore formed during the post-tectonic phase. However, it shows a variable thickness due to subsidence to the north of the Bangombé plateau. So, on the Bangombé plateau, Mn-contents increase towards the south, whereas the protore thickness increases towards the NNE. Moreover sand injectites decrease Mn-content in the eastern part of the Bangombé plateau and impact on the economic evaluation of the Mn-carbonates. Currently, the protore is structured by post-sedimentary faults, which lead to a non-continuity of the high Mn levels on the Bangombé plateau.
Le Bassin de Franceville situé au SE du Gabon présente une série de black shales (Formation FB) d'âge Paléoprotérozoïque (2,1 Ga) surmontant les grès de la Formation FA. Ce bassin peu déformé et non métamorphique représente une archive exceptionnelle des processus de dépôt de cette période de l’histoire de la Terre où la vie commence à se développer. En particulier, la Formation FB contient le protore d'un gisement mondial d'oxydes de manganèse exploité par la société Eramet-Comilog. L’objectif de ce travail est de préciser les conditions de formation de ce protore et de le replacer dans l’histoire du remplissage du bassin. Ce protore d'une épaisseur moyenne de 75 m est constitué de carbonates de manganèse ; il a fait l'objet d'une récente campagne de 24 forages carottés d'une profondeur moyenne de 125 m sur le plateau de Bangombé.A travers une approche pluridisciplinaire comprenant l'étude de ces forages et des affleurements clefs du bassin, ce travail porte sur la caractérisation i) de l'environnement de dépôt du protore et des séries qui l'encadrent (du toit du FA au toit du FB) ; ii) du mode de formation des carbonates de Mn à 2,1 Ga et iii) de l'architecture et de la répartition des hautes teneurs en Mn du protore qui représente un gisement potentiel du futur.L’étude pétro-sédimentaire détaillée a permis de distinguer neuf unités (U1 à U9) au sein de la Formation FB organisées suivant un cycle rétrogradant jusqu’à U5 puis progradant jusqu’à U9. Ce découpage montre une évolution du milieu de dépôt depuis un domaine de shoreface contrôlé par des courants deltaïques (U1) évoluant vers des dépôts d’offshore restreint (U2). Ce bassin enregistre ensuite un système de chenaux-levées turbiditiques (U3) qui alimentent un réseau d'injectites reconnu sur l’ensemble du Pl. de Bangombé et qui traverse 150 m de série (U4 à U7) en affectant le protore et ainsi les teneurs en Mn. L'environnement de dépôt du protore (U5 et U6) marque l’isolement du bassin qui devient affamé et contrôlé par une sédimentation biochimique à l’origine du dépôt des carbonates de Mn. L'Unité 7 correspond à la réouverture des apports détritiques en domaine d'offshore supérieur puis en domaine de shoreface dominé par des dépôts de tempêtes et de chenaux sous-aquatiques deltaïques (U8), et enfin lagunaire (U9) dans lequel apparaissent les premiers métazoaires de l’histoire de la planète, suivant une séquence régressive.Une étude géochimique a permis de préciser les conditions de dépôt du protore qui se forme en milieu alcalin anoxique à sub-oxique. Dans ce milieu, nous montrons pour la première fois une précipitation directe des carbonates de Mn sous forme bactériomorphe induite par l'activité photosynthétique des cyanobactéries qui consomment le CO2/HCO3 et conduisent à une augmentation du pH favorable à la formation des carbonates de Mn. L'activité cyanobactérienne est conditionnée par l’absence de courants de fond qui augmentent la turbidité du milieu et stoppent cette dernière.Les corrélations diagraphiques et séquentielles permettent de préciser la répartition spatiale et temporelle du FB permettant ainsi de replacer le protore dans l’histoire tectono-sédimentaire du bassin. Une première phase syn-tectonique (U1 à U3) contrôle l’épaisseur et la mise en place de dépôts turbiditiques dans les parties subsidentes, de dépôts argileux sur les pentes et de dépôt de carbonates sur les hauts-fonds. La seconde phase post tectonique (U4 à U7) permet la mise en place de dépôts relativement isopaques, bien que le protore enregistre une subsidence plus importante au nord du Pl. de Bangombé. On observe ainsi, sur le Plateau de Bangombé, des teneurs en Mn qui augmentent vers le sud alors que l’épaisseur du protore augmente vers le NNE. Postérieurement au dépôt du FB, le protore est structuré par des failles qui le compartimentent en touches de piano limitant ainsi sa continuité sur le Plateau de Bangombé.
https://hal.archives-ouvertes.fr/tel-01621460

tel-01621460
https://hal.archives-ouvertes.fr/tel-01621460
https://hal.archives-ouvertes.fr/tel-01621460/document
https://hal.archives-ouvertes.fr/tel-01621460/file/these_Dubois2017-MnGabon.pdf

Éditeur(s) : HAL CCSD
Résumé : il s'agit d'un type de produit dont les métadonnées ne correspondent pas aux métadonnées attendues dans les autres types de produit : ACTIVITY_REPORT
Understanding genomic evolution in wild populations is of particular importance because evolution is a central process in our understanding of populations’ history and their future response to global changes. In addition to fundamental knowledge, the study of populations’ evolution has wide applications such as conservation/restoration genetics or epidemiology. Indeed, genetic diversity is the ‘fuel’ for populations’ evolution and adaptation to new conditions, and estimating the extent and the geographic structure of genetic diversity, as well as identifying the evolutionary forces behind (demography, gene flow, and adaptation) are thus major challenges in the current context of global changes. [br/]A particular attention is currently devoted to the process of genetic divergence in wild populations, with emphases on gene flow, local adaptation, and their interactions. Indeed, adaptation in wild populations is supported in many species by many kinds of experiments based on both quantitative phenotypic traits and molecular data. However, the processes governing populations’ evolution are poorly understood in the tropical rainforest of Amazonia, and the relative influence of neutral and adaptive processes are continuously discussed. [br/]I am a young scientist interested in the process of genomic divergence in wild (tree) populations. I aimed at understanding how evolution structures the genetic diversity and governs molecular divergence in wild populations, with particular emphases on gene flow and local adaptation. During five years as a young scientist, I worked on answering the following questions, focusing on two tree species occupying vulnerable areas: mainly [i]Eperua falcata[/i] in Amazonia and, to a lesser extent, [i]Abies alba[/i] in the Mediterranean area.[br/][u]Scientific questions:[/u][br/]- Which evolutionary drivers are responsible of the structure of genetic diversity in wild populations occupying wide areas? This question was addressed at different geographical scales: from large (regional) to very local (microgeographic) scales. [br/]- What is the relative influence of neutral (gene flow, inbreeding) and adaptive drivers in the process of genetic divergence?[br/]- Is microgeographic adaptation possible in spite of extensive gene flow between populations occupying the extreme boundaries of an ecological gradient? [br/]- What is the extent of natural selection in the (whole) genome of wild populations? [br/][br/]My research work is at the interface between three promising disciplines: Evolutionary genomics (i.e. the study of populations evolution and the evolutionary drivers behind), Bioinformatics (i.e. the treatment of next-generation data), and Bayesian modelling (i.e. the empirical calibration of complex mechanistic model). I intend to take advantage of the recent advances in sequencing and informatic technologies to bring up to date the field of ecological genetics and evolutionary biology, by developing modern research strategies to study the process of genomic divergence in wild populations.
https://hal.archives-ouvertes.fr/hal-01204218

hal-01204218
https://hal.archives-ouvertes.fr/hal-01204218
PRODINRA : 286326

Éditeur(s) : HAL CCSD
Résumé : 1 p.
For groundwater issues (potential leakages in waste repository, aquifer management ...), the development of modeling techniques is far ahead of the actual knowledge of aquifers. This raises two fundamental issues: 1) which and how much data are necessary to make predictions accurate enough for aquifer management issues; 2) which models remain relevant to describe the heterogeneity and complexity of geological systems. The French observatory H+ was created in 2002 with the twofold motivation of acquiring a large database for validating models of heterogeneous aquifers, and of surveying groundwater quality evolution in the context of environmental changes. H+ is a network of 4 sites (Ploemeur, Brittany, France; HES Poitiers, France; Cadarache, France; Campos, Mallorca, Spain) with different geological, climatic, and economic contexts. All of them are characterized by a highly heterogeneous structure (fractured crystalline basement for Ploemeur, karstified and fractured limestone for Poitiers, Cadarache and Mallorca), which is far to be taken into account by basic models. Ploemeur is exploited as a tap-water plant for a medium-size coastal city (15,000 inhabitants) for 20 years. Each site is developed for long term investigation and monitoring. They involves a dense network of boreholes, detailed geological and geophysical surveys, periodic campaigns and/or permanent measurements of groundwater flow, water chemistry, geophysical signals (including ground motions), climatic parameter, etc. Several large-scale flow experiments are scheduled per year to investigate the aquifer structure with combined geophysical, hydrogeological, and geochemical instruments. All this information is recorded in a database that has been developed to improve the sustainability and quality of data, and to be used as a collaborative tool for both site researchers and modelers. This project lasts now for 5 years. It is a short time to collect the amount of information necessary to apprehend the complexity of aquifers; but it is already enough to obtain a few important scientific results about the very nature of the flow heterogeneity, the origin and residence time of water elements, the kinetic of geochemical processes, etc. We have also developed new methods to investigate aquifers (in-situ flow measurements, flow experiment designs, groundwater dating, versatile in-situ probes, etc.). This experience aiming at building up long term knowledge appears extremely useful to address critical issues related to groundwater aquifers: the structure and occurrence of productive aquifer in crystalline basement, the assessment of aquifer protection area in the context of highly heterogeneous flow, the biochemical reactivity processes, the long term evolution of both water quantity and quality in the context of significant environmental changes, for instance.
AGU, Fall Meeting 2008
San Francisco, United States

insu-00375980
https://hal-insu.archives-ouvertes.fr/insu-00375980

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Alkali feldspar thermochronologic modeling with the 40Ar/39Ar method has generated marked advances in knowledge of the mechanisms for argon diffusion in feldspars. While the goal in many cases has been to extrapolate the observed and modeled argon behavior in feldspars to natural geological settings, scientific debate surrounding the true feasibility of such extrapolations and indeed, the validity of thermochronologic modeling in itself, have provided much impetus to improve laboratory techniques to test, and increase basic understanding of, argon diffusion. Two cornerstones for the debate over the feasibility of alkali feldspar thermochronology for modeling natural, geologic processes have been: 1. is volume diffusion the main mechanism for argon movement in feldspars? and 2. if volume diffusion is a viable mechanism, does argon then reside in discrete ‘domains' within the feldspar lattice? We describe a study of alkali feldspars from a profile through a well-controlled brittle fault zone in western Norway; the feldspars document argon loss during deformation and strongly suggest the existence of argon ‘domains' within the feldspars, at least during laboratory step heating. The progressive change in the character of argon diffusion is recognizable in the logr/ro diffusion data from the feldspars and is mimicked by physical changes observed optically in the feldspars through progressive degrees of brittle deformation. Modeling results indicate a reduction in size of the biggest domains and the appearance of smaller domains during the strongest stages of deformation. Whether or not this reveals the existence and the transformation of the domain structure in naturo is difficult to prove from our data alone, but interestingly, this behaviour corresponds directly to the physical (optical) appearance of more intense crack networks and subgrains in progressively more brecciated feldspars. Because the thermochronologic histories derived from modeling the feldspar data conform very well to the known tectonic history of the area, the feldspars appear to have successfully retained physical (optical and isotopic) records of episodic tectonic processes operating from ductile through lowtemperature brittle regimes in rocks with a Caledonian history overprinted by several later (younger) geologic events. However, because the ‘cold' brecciation is the last tectonothermal event recorded by these rocks, it is impossible to truly test for the existence of diffusion domains in naturo. Argon loss appears to have been effective only in the most highly brecciated (deformed) samples where the combination of the connected crack network, increased fluid flow and higher temperatures enhanced diffusion via fast diffusion pathways and thus, volume diffusion from the lattice. Only minor argon loss occurred in zones of lower brittle strain, although some development of cracks and brittle features is evident. Independent of the existence of diffusion domains, this study highlights the possible pitfalls when cooling histories are deduced from brecciated feldspars in which age and diffusion charateristics have been decoupled: while the geochronological memory has survived and is identical to that of nonbrecciated feldspars (suggesting no loss and minor effects of deformation), the diffusion characteristics have been completely transposed by brecciation and the appearance of new domains. Modeling feldspars with these latter characteristics would effectively utilise a new feldspar diffusion structure with an ‘old' (relict) age memory.
ISSN: 0016-7037

hal-00198283
https://hal.archives-ouvertes.fr/hal-00198283
https://hal.archives-ouvertes.fr/hal-00198283/document
https://hal.archives-ouvertes.fr/hal-00198283/file/KsparBreccia_Arnaud_Eide_GCA_2000.pdf

Éditeur(s) : HAL CCSD American Geophysical Union (AGU)
Résumé : International audience
This paper presents a new balanced structural cross-section of the Jaca thrust-sheet-top basin of the southern Pyrenees combined with paleo-thermometry and apatite fission track (AFT) thermochronology data. The cross-section, based on field data and interpretation of industrial seismic reflection profiles, allows refinement of previous interpretations of the south-directed thrust system, involving the identification of new thrust faults, and of the kinematic relationships between basement and cover thrusts from the middle Eocene to the early Miocene. AFT analysis shows a southward decrease in the level of fission track resetting, from totally reset Paleozoic rocks and lower Eocene turbidites (indicative of heating to Tmax > ~120 °C), to partially reset middle Eocene turbidites and no/very weak resetting in the upper Eocene-lower Oligocene molasse (Tmax < ~60 °C). AFT results indicate a late Oligocene-early Miocene cooling event throughout the Axial Zone and Jaca Basin. Paleo-maximum temperatures determined by vitrinite reflectance measurements and Raman spectroscopy of carbonaceous material reach up to ~240 °C at the base of the turbidite succession. Inverse modelling of AFT and vitrinite reflectance data with the QTQt software for key samples show compatibility between vitrinite-derived Tmax and the AFT reset level for most of the samples. However, they also suggest that the highest temperatures determined in the lowermost turbidites correspond to a thermal anomaly rather than burial heating, possibly due to fluid circulation during thrust activity. From these results, we propose a new sequential restoration of the south Pyrenean thrust system propagation and related basin evolution.
ISSN: 0278-7407

insu-01312746
https://hal-insu.archives-ouvertes.fr/insu-01312746
https://hal-insu.archives-ouvertes.fr/insu-01312746/document
https://hal-insu.archives-ouvertes.fr/insu-01312746/file/Labaume_et_al-2016-Tectonics.pdf
DOI : 10.1002/2016TC004192

Éditeur(s) : HAL CCSD Inter-Research
Résumé : International audience
Ecological connectivity is important for effective marine planning and biodiversity conservation. Our aim was to identify factors important in influencing variation in benthic community structure on shallow rocky reefs in 2 regions of the Mediterranean Sea with contrasting oceanographic regimes. We assessed beta (β) diversity at 146 sites in the littoral and shallow sub-littoral from the Adriatic/Ionian Seas (eastern region) and Ligurian/Tyrrhenian Seas (western region) using a null modelling approach to account for variation in species richness. The distance decay relationship between species turnover within each region and geographic distance by sea was determined using generalised linear models. Mantel tests were used to examine correlations between β diversity and connectivity by ocean currents, estimated from Lagrangian dispersal simulations. Variation in β diversity between sites was partitioned according to environmental and spatial components using a distance-based redundancy approach. Species turnover along a gradient of geographic distance was greater by a factor of 3 to 5 in the western region than the eastern region, suggesting lower con-nectivity between sites. β diversity was correlated with connectivity by ocean currents at both depths in the eastern region but not in the western region. The influence of spatial and environmental predictors of β diversity varied considerably between regions, but was similar between depths. Our results highlight the interaction of oceanographic, spatial and environmental processes influencing benthic marine β diversity. Persistent currents in the eastern region may be responsible for lower observed β diversity compared to the western region, where patterns of water circulation are more variable.
Marine Ecology Progress Series

Droits : http://creativecommons.org/licenses/by/
hal-01357935
https://hal-univ-perp.archives-ouvertes.fr/hal-01357935
https://hal-univ-perp.archives-ouvertes.fr/hal-01357935/document
https://hal-univ-perp.archives-ouvertes.fr/hal-01357935/file/m553p001.pdf
DOI : 10.3354/meps11783

Éditeur(s) : HAL CCSD
Résumé : To study the dynamics of an orogen-foreland system and more particularly the impact of surface processes on its development, we base our work on two main axes. In a first part, using analogue tapered wedge models, we investigate the interplay between tectonics, erosion and sedimentation during the orogenic growth. The basis model mimics the evolution of a wedge section extending from the orogen to its foreland basin, with both the structural and the lithological heritages simulated. In a second part, the focus is on the recent tectonic and geomorphologic processes affecting the Swiss Prealpes klippen belt and surrounding structural units (Molasse basin and Jura fold-and-thrust belt). Remote sensing analyses allow to evaluate the impact of tectonics on the drainage pattern and landscape morphology. In addition, local field investigations in the Prealpes provide information on the nature and kinematic of brittle fractures and the paleostress fields.
Afin d'étudier la dynamique d'un système orogène/avant-pays et plus particulièrement l'impact des processus de surface sur son développement, notre travail se base sur deux axes principaux. Dans une première partie, à l'aide de modèles analogiques de prisme d'accrétion, nous analysons les interactions entre la tectonique, l'érosion et la sédimentation au cours de la croissance de l'orogène. Le modèle de base reproduit l'évolution d'une section de prisme, qui s'étend de l'orogène au bassin d'avant-pays, et où les héritages à la fois structural et lithologique sont simulés. Dans une seconde partie, l'accent est mis sur la tectonique récente et les processus géomorphologiques qui affectent la klippe des Préalpes suisses et les unités structurales environnantes (le bassin molassique et le Jura). Des analyses de télédétection permettent d'évaluer l'influence de la tectonique sur le réseau de drainage et la morphologie du paysage. De plus, des analyses de terrain menées localement dans les Préalpes fournissent des informations sur la nature et la cinématique des fractures cassantes et des champs de paléocontraintes.
https://tel.archives-ouvertes.fr/tel-00138836

tel-00138836
https://tel.archives-ouvertes.fr/tel-00138836
https://tel.archives-ouvertes.fr/tel-00138836/document
https://tel.archives-ouvertes.fr/tel-00138836/file/These_Bonnet_2007.pdf

Éditeur(s) : HAL CCSD BioMed Central
Résumé : International audience
ABSTRACT: BACKGROUND: Climate change poses unprecedented challenges, ranging from global and local policy challenges to personal and social action. Heat-related deaths are largely preventable, but interventions for the most vulnerable populations need improvement. Therefore, the prior identification of high risk areas at the community level is required to better inform planning and prevention. We aimed to demonstrate a simple and flexible conceptual framework relying upon satellite thermal data and other digital data with the goal of easily reproducing this framework in a variety of urban configurations. RESULTS: The study area encompasses Rennes, a medium-sized French city. A Landsat ETM + image (60 m resolution) acquired during a localized heatwave (June 2001) was used to estimate land surface temperature (LST) and derive a hazard index. A land-use regression model was performed to predict the LST. Vulnerability was assessed through census data describing four dimensions (socio-economic status, extreme age, population density and building obsolescence). Then, hazard and vulnerability indices were combined to deliver a heatwave health risk index. The LST patterns were quite heterogeneous, reflecting the land cover mosaic inside the city boundary, with hotspots of elevated temperature mainly observed in the city center. A spatial error regression model was highly predictive of the spatial variation in the LST (R2 = 0.87) and was parsimonious. Three land cover descriptors (NDVI, vegetation and water fractions) were negatively linked with the LST. A sensitivity analysis (based on an image acquired on July 2000) yielded similar results. Southern areas exhibited the most vulnerability, although some pockets of higher vulnerability were observed northeast and west of the city. The heatwave health risk map showed evidence of infra-city spatial clustering, with the highest risks observed in a north--south central band. Another sensitivity analysis gave a very high correlation between 2000 and 2001 risk indices (r = 0.98, p < 10-12). CONCLUSIONS: Building on previous work, we developed a reproducible method that can provide guidance for local planners in developing more efficient climate impact adaptations. We recommend, however, using the health risk index together with hazard and vulnerability indices to implement tailored programs because exposure to heat and vulnerability do not require the same prevention strategies.
ISSN: 1476-072X

inserm-00762303
http://www.hal.inserm.fr/inserm-00762303
http://www.hal.inserm.fr/inserm-00762303/document
http://www.hal.inserm.fr/inserm-00762303/file/1476-072X-11-38.pdf
DOI : 10.1186/1476-072X-11-38

Éditeur(s) : American Geophysical Union
Résumé : [1] Extreme weather events such as tropical cyclones are difficult to observe with conventional means. Satellite-based observations provide essential measurements of key parameters governing tropical cyclones. They are critical for short-term forecasting. Radiometers onboard the Defense Meteorological Satellite Program satellite series, WindSat and Tropical Rainfall Measuring Mission satellites, scatterometers onboard the ERS, ADEOS, and QuikScat satellites offer unprecedented synoptic observations of surface wind and atmospheric liquid water content, revealing the storm structures with good accuracy. However, satellite estimates do not provide direct measurements of geophysical parameters and can suffer from limitations linked to the sensors characteristics, such as the signal wavelength and polarization or the measurement incidence angle. For example, measurements at Ku band are strongly affected by rain. Still, each observing system can offer specific information that can be combined with the others. In particular, we highlight the capabilities of dual-frequency altimeter to provide very high resolution measurements of rain rate, surface wind speed, and wave characteristics. A method is proposed to obtain continuous along-track 5 km resolution measurements of these parameters in the tropical cyclone Isabel. The results shows that dual-frequency altimeters can provide useful information to complement and validate the operational fields provided by the atmospheric numerical models and by NOAA observing systems.
Journal of Geophysical Union - Research C - Oceans (0148-0227) (American Geophysical Union), 2006 , Vol. 111 , N. C1 , P. NIL_38-NIL_50

Droits : 2006 American Geophysical Union
http://archimer.ifremer.fr/doc/2006/publication-1033.pdf
DOI:10.1029/2005JC003068
http://archimer.ifremer.fr/doc/00000/1033/

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Terrane accretion and intraplate deformation are both common processes occurring during the assembly of large continental masses. The relative roles of these mechanisms are at the heart of a debate concerning the tectonic evolution of the Borborema Province, northeastern Brazil. In the Central subprovince, four terranes or domains have been proposed. In the Alto Moxotó domain, paragneiss of the Sertânia Complex were considered to record a distinct structural and geochronological evolution compared to those in the adjacent Rio Capibaribe domain, in the East. Here, we report the results of a geological study conducted in the type area of the Sertânia Complex. Kinematic criteria and metamorphic mineral assemblages indicate that the main foliation record top-to-the-W tectonic transport under upper amphibolite facies conditions (650–700 °C). The main foliation was affected by overturned folds and upright to inclined folds; the latter two formed coevally with the development of transcurrent shear zones. Samples of mafic orthogneiss and paragneiss tectonically intercalated in the same outcrop were dated by LA-ICP-MS. The orthogneiss sample yields a crystallization age of 1978 ± 8 Ma. Detrital zircons in the paragneiss sample show a multimodal pattern with a well-defined age peak at c. 700 Ma, showing that the paragneiss is younger than 700 Ma and so the main foliation is also younger than this age. In turn, these findings suggest that the occurrence of exclusively Paleoproterozoic zircons in three other dated samples of paragneiss cannot be used to accurately define the deposition age of the detritus. The structural and geochronological characteristics of the Sertânia Complex are similar to those of the Surubim Complex in the Rio Capibaribe domain. Together with previous results showing that the basement of the Alto Moxotó and Rio Capibaribe domains is also similar, we interpret these sequences as having been deposited on a once contiguous tract of continental crust. An accretionary terrane model is thus not required to account for the tectonic evolution of this portion of the Borborema Province. Instead, a model of intracontinental deformation of a preexistent continent is fully supported by the data and also by the lack of evidence for oceanic subduction.
ISSN: 0301-9268

hal-01622825
https://hal.archives-ouvertes.fr/hal-01622825
DOI : 10.1016/j.precamres.2017.07.006

Résumé : L'importance des forêts tropicales dans le cycle du carbone à l'échelle planétaire est majeure, tant en terme de stock qu’en terme de flux de CO2. Plusieurs études mettent en évidence des changements au sein des forêts tropicales au cours des 20 dernières années, notamment des changements de la dynamique forestière et une augmentation de la biomasse aérienne. Les déterminants de ces variations sont aujourd’hui discutés et nous proposons ici d’apporter une contribution à ce débat. Les données utilisées dans ce travail proviennent du dispositif de suivi forestier à long terme de Paracou, Guyane Française, mis en place en 1984 et qui recouvre plus de 120 ha de forêt tropicale humide. Les données météorologiques proviennent de la tour à flux du dispositif, Guyaflux. Les mesures de diamètre proviennent de la base Guyafor pour les données annuelles et bisannuelles, et des mesures de 260 arbres à proximité de la tour à flux pour les mesures diamétriques intra-annuelles.Cette thèse se divise en deux grandes parties. La première concerne l’analyse de la biomasse du dispositif de suivi forestier de Paracou en Guyane et l’implication des changements de structure de cette forêt sur le bilan de carbone. Cette partie est constituée de deux points. (i) Quelles échelles temporelles et spatiales sont pertinentes pour analyser les composantes de structure (biomasse, aire basale et nombre de tiges) et de dynamique (croissance, recrutement et mortalité) des forêts tropicales afin de minimiser les effets d’échantillonnage ? Nous avons établi une méthodologie permettant de relier les intervalles de temps et la surface de mesure aux coefficients de variation de chacune des variables de structure et de dynamique de la forêt. (ii) Quels processus démographiques sont prépondérants dans l’explication des variations de biomasse et comment se redistribue la biomasse accumulée dans le système ? L’augmentation de la biomasse observée sur le dispositif de Paracou serait liée à la rareté des évènements de mortalité des gros arbres qui portent une part très importante de la biomasse.La deuxième partie de la thèse concerne l’analyse de l’effet du climat à moyen terme, inter et intra-annuel, et les effets directs du climat dans les changements de dynamique de la forêt. Cette partie se divise en 3 points. (i) Comment quantifier le stress hydrique en forêt tropicale humide ? Nous avons réalisé un modèle journalier de réserve en eau du sol pour les arbres en forêt tropicale. (ii) Quelles variables sont explicatives de la croissance des arbres en forêt guyanaise ? Nous avons montré que l’eau dans le sol est le facteur le plus explicatif du déterminisme climatique parmi un panel de variables climatiques. (iii) Quels traits fonctionnels sont prédicteurs de la réponse des arbres aux variations climatique ? Nous avons déterminé que des traits spécifiques, densité du bois et la hauteur maximale, ainsi que le diamètre de l'arbre au moment de la mesure, modulent la croissance des arbres en réponse au climat.
At a global scale tropical forest play a major role in term of carbon stock as well as in term of CO2 fluxes. Several studies have highlighted changes in tropical forest functioning during the last 20 years including a faster turnover and an increase of above ground biomass. The drivers of these changes are discussed and throughout this thesis we propose to contribute to this debate. We use the data from the Paracou experimental site in French Guiana established in 1984 on 120 hectares of moist tropical forest. Meteorological data come from the flux tower of the site, Guyaflux. We use annual and bisannual diameter measurements from the Guyafor database, and intra-annual diameter increments from the measurements of 260 trees near the flux tower.This thesis has two main parts. In the first part we present the biomass analysis of the Paracou permanent plots and the impact of structural changes in this forest on the carbon budget. The first part is constituted by two points. (i) Which temporal and spatial scale used to analyze the structure (biomass, basal area and stem density) and dynamics (tree growth, recruitment and mortality)components of tropical forest in order to minimized sample bias ? We establish a simple method to rely measurement interval between census and surface of measurement to the coefficient of variation of forests structure and dynamic components (ii) Which demographic process are involved in the explanation of biomass variation and how the biomass is distributed in the system ? The observed increase of biomass at Paracou could be link to the rarity of big trees mortality events. These big trees represent the larger part of the biomass. In the second part, we present the analysis of intra and inter-annual climate variation effects on forest dynamic changes. This part is divided in two points. (i) How to model drought stress in moist tropical forest ? We built a daily water balance model for tropical trees. (ii) Which climate variables explain the tree growth in guianian forests? We shown that soil water availability is the determinant factor of tree growth among a panel of climate variables. (iii) Which functional traits are involved in the tropical tree growth responses to climate? In this analysis, we determined that wood specific gravity, maximum tree height and tree diameter modulate the tree growth response to climate variations.

http://www.theses.fr/2011AGUY0481/document

Éditeur(s) : HAL CCSD
Résumé : In SW Yukon – SE Alaska, the boundary between the Pacific and North America plates is characterized by a syntaxis at the transition between the Aleutian subduction to the W and the Fairweather – Queen Charlotte strike-slip faults to the SE. The relative motion is oblique to the main fault structures, and the area is marked by the Yakutat block collision. From the Chugach – Saint Elias mountains in the plate boundary zone (up to 6 000 m high) to the intraplate strike-slip faults, markers of the present-day deformation give information on its partition in the system.During my PhD, I first measure surface deformation using a dense GPS network, deployed up to 500 km inland the North America plate. After precise processing and corrections of transient effects in the area (postseismic and glacial isostatic rebound), a new residual velocity field is produced for the syntaxis area, from which I derive strain rates. Those data allow me to quantify the fault slip rates for Fairweather and southern Denali strike-slip faults, and to characterize a bi-modal deformation pattern: Along the plate boundary, the deformation is localized on large-scale structures (accretionary prism to the W, Fairweather to the E); In the syntaxis area, strain rates are the highest and the GPS data shows a diffuse intraplate deformation, similar to an indentor pattern. The Yakutat block seems to strongly drive the North America plate deformation.This indentor pattern induces strong lateral variations on the large intraplate faults: the Denali – Totschunda – Duke River system. In a second part, I realize a regional geomorphological study to characterize the role and slip rate of those faults. From very high-resolution Digital Elevation Models (~ 1 m), a detailed cartography is done. On the basis of fieldwork observations, I measure offsets of fluvial and glacial markers, which are sampled for dating. A dextral cumulative deformation is highlighted on the northern Denali Fault, where as all southern Denali is marked by vertical deformation. This study allows me to quantify new slip rates for the system Denali – Totschunda – Duke River, and to show the leading role of the Totschunda (~ 14 mm/a) and Duke River (~ 6 mm/a) faults, contrary to the Denali Fault (~ 1 mm/a) North of the syntaxis.The new tectonic model for the Yakutat collision provides an important case study for the understanding of indentor systems. The concomitance of a rigid-block deformation (to the West) and diffuse deformation (to the East), as well as the near-zero slip rate on the lithospheric-scale southern Denali Fault highlight the major control of boundary conditions and the structural heritage on the orogen deformation.
Au SO Yukon – SE Alaska, la frontière entre les plaques Pacifique et Nord-Amérique est marquée par une syntaxe à la transition entre la subduction des Aléoutiennes à l’O et le décrochement de Fairweather – Queen Charlotte au SE. Le mouvement relatif est oblique et la région est marquée par la collision du bloc Yakutat. De la chaine des Chugach – Saint Elias en frontière de plaque (jusqu’à 6 000 m d’altitude) aux grands décrochements intraplaque, les marqueurs de la déformation actuelle apportent des informations sur sa partition dans ce système.Au cours de cette thèse, je m’intéresse dans un premier temps à mesurer la déformation de surface à l’aide d’un réseau GPS dense, déployé jusqu’à 500 km à l’intérieur de la plaque Nord-Amérique. Après un travail minutieux de traitement des données et de correction des effets transitoires (rebond post-glaciaire et post-sismique), un champ de vitesses résiduelles robuste et inédit est produit au niveau de la syntaxe, dont je dérive des taux de déformation. Ces données me permettent de quantifier les vitesses de glissement les failles décrochantes de Fairweather et Denali au Sud, et également de caractériser une déformation bimodale : En frontière de plaques, la déformation est localisée sur les grandes structures (prisme d’accrétion à l’O, Fairweather à l’E) ; Au niveau de la syntaxe, les taux de déformation sont les plus importants et les données GPS mettent en évidence une déformation intraplaque diffuse, similaire à un champ attendu à l’aplomb d’un indenteur. Le bloc Yakutat semble donc contrôler fortement la déformation de la plaque Nord-Amérique.Ce champ de déformation induit des variations latérales fortes sur les grandes failles intraplaque : le système Denali-Totschunda-Duke River. Dans une seconde partie, je réalise une étude géomorphologique régionale pour caractériser le rôle et la vitesse de ces failles. À partir de Modèles Numériques de Terrain très haute résolution (~ 1 m), une cartographie de détail est réalisée. Puis une mission de terrain me permet de mesurer des décalages sur des marqueurs fluviatiles et glaciaires et collecter des échantillons pour les dater. Je mets en évidence une déformation cumulée dextre sur le segment Nord de la faille de Denali, alors que toute la partie Sud déforme verticalement la surface. Cette étude me permet de quantifier de nouvelles vitesses de failles sur le système Denali-Totschunda-Duke River, et de montrer le rôle prépondérant des failles de Totschunda (~ 14 mm/a) et Duke River (~ 6 mm/a) contrairement à la faille de Denali (~ 1 mm/a) au Nord de la syntaxe.Le nouveau modèle cinématique proposé pour la région de collision Yakutat permet d’apporter un nouvel exemple à la compréhension des systèmes d’indenteur. La concomitance d’une déformation de blocs (à l’Ouest) et diffuse (à l’Est), ainsi que l’absence de déformation sur la faille lithosphérique de Denali Sud met en évidence le contrôle majeur des conditions aux limites et de l’héritage structural dans la déformation des orogènes.
https://hal.archives-ouvertes.fr/tel-01241688

tel-01241688
https://hal.archives-ouvertes.fr/tel-01241688
https://hal.archives-ouvertes.fr/tel-01241688/document
https://hal.archives-ouvertes.fr/tel-01241688/file/manuscrit_anais_v2_optimise.pdf

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Orogenic wedges locally present chaotic tectonostratigraphic units that contain exotic blocks of various size, origin, age and lithology, embedded in a sedimentary matrix. The occurrence of ophiolitic blocks, sometimes huge, in such “mélanges” raises questions on (i) the mechanisms responsible for the incorporation of oceanic basement rocks into an accretionary wedge and (ii) the mechanisms allowing exhumation and redeposition of these exotic elements in “mélanges” during wedge growth.To address these questions, we present the results of a series of analogue experiments performed to characterize the processes and parameters responsible for accretion, exhumation and tectonosedimentary reworking of oceanic basement lithospheric fragments in an accretionary wedge.The experimental setup is designed to simulate the interaction between tectonics, erosion and sedimentation. Different configurations are applied to study the impact of various parameters, such as irregular oceanic floor due to structural inheritance, or the presence of layers with contrasted rheology that can affect deformation partitioning in the wedge (frontal accretion vs basal accretion) influencing its growth. Image correlation technique allows extracting instantaneous velocity field, and tracking of passive particles. By retrieving the particle paths determined from models, the pressure-temperature path of mélange units or elementary blocks can be discussed. The experimental results are then compared with observations from ophiolite-bearing mélanges in Taiwan (Lichi and Kenting mélanges) and Raman spectroscopy of carbonaceous material (RSCM) Thermometry data on rocks from the northern Apennines (Casanova mélange). A geological scenario is proposed following basic observations. The tectonic evolution of the retroside of doubly vergent accretionary wedges is mainly controlled by backthrusting and backfolding. The retro wedge is characterized by steep slopes that are prone to gravitational instabilities. It triggers submarine landslides inducing huge mass transfers. This erosion combined with backthrusting could favour exhumation of the ophiolitic fragments formerly accreted at the base of the wedge along the rough seafloor-sediments interface. Such an exhumed material can be reworked and deposited as debris- flows in proximal basins located at the foot of the retrowedge slope forming a tectono-sedimentary mélange. These syntectonic basins are continuously deformed and involved in prograding backthrusting-induced deformation.
ISSN: 0264-3707

hal-01395127
https://hal.archives-ouvertes.fr/hal-01395127
DOI : 10.1016/j.jog.2016.05.008

Éditeur(s) : Université de Bucarest - Université de Bretagne occidentale
Résumé : This study is focusing on the architecture and recent sedimentary evolution of the Danube channel, the youngest channel-levee system in the Danube deep-sea fan. The study was conducted as part of the BlaSON French-Romanian Project, and combined high-resolution seismic-reflection profiles and chirp profiles with multibeam bathymetry and piston cores. This data set was acquired in 1998 during a joint survey IFREMER-GeoEcoMar of the north-western Black Sea. Previous seismic and acoustic data were also used. The Danube deep-sea fan is a large passive-margin mud-rich fan. Like the other systems of this type (Amazon fan, Mississippi fan or Indus fan) the Danube fan consists of stacked channel-levee systems intercalated with mass-transport deposits. Seismic and sedimentary facies in the Danube fan are similar to those identified in most of the mud-rich systems. Nevertheless, the Danube fan is distinguished by a specific feature: its development in a freshwater environment. This is due to the peculiar water-level history of the Black Sea controlled by the link to the Mediterranean through the Strait of Bosphorus and the Sea of Marmara. This connexion was successively interrupted (during sea level lowstands) and re-established (when the sea level was rising above the Bosphorus). Temporary absence of marine water influx during lowstands together with large freshwater inputs from the Danube and other major rivers changed the Black Sea into a freshwater lake during times of fan activity. This peculiarity possibly favourised the development of hyperpycnal flow at the Danube mouth and the initiation of turbidity currents in the deep-sea fan. The Danube channel is directly connected to the large shelf-indenting Danube canyon (also known as Viteaz canyon). The Danube canyon is deeply incised into the shelf margin for 26 km landward of the shelfbreak. During lowstands this canyon acted as the most important path for sediment supply to the deep sea in this part of the continental margin. It consists of a main trough with steep flanks, and a meandering thalweg cut into the flat canyon floor, attesting for the development of the canyon by erosion in the entrenched axial thalweg. Sections with specific morphology, orientation and gradient identified along the canyon, are interpreted as phases of landward expansion of the canyon. Internal structure of the canyon shows several erosional surfaces, which indicate that the present morphology of the canyon is the result of its polyphasic evolution. Instability in the zone of the canyon is related to the important sediment supply at the Danube mouth, to the presence of the gas in the surficial sediment, and possibly under a structural control. The upper part of the Danube channel (between the Danube canyon and ~1400 m depth) consists in a single leveed-channel that has undergone significant overbank deposition, as attested by the well-developed levees. The levees are strongly asymmetrical, being higher and wider on the right-hand side looking downstream. This type of asymmetry is rather common in deep-sea fans, and is generally attributed to the Coriolis effect (Menard, 1955). The channel is slightly sinuous, partially filled and incised by an entrenched thalweg, connected to the axial thalweg of the Danube canyon. Detailed seismic investigation inside the channel trough documented several depositional phases within the channel fill, separated by erosional surfaces. These surfaces are associated with distinct terraces identified on the multibeam bathymetry, that can be followed downward along the main trough axis. The valley fill deposits (where not removed by the subsequent erosional event) show an axial HAR (High Amplitude Reflections) seismic facies with lateral lower amplitude continuous reflections consisting in a levee facies, as proved by sampling. This indicates that filling up was associated with flow within the channel, and not with interruption of fan activity. On the middle slope below 1400 m, this single channel bifurcates through repeated avulsions. As a result, several highly meandering channels developed. The onlap relationships between these channels indicate that only one channel was active at a time. Each phase of avulsion resulted in a depositional unit consisting in a basal unchannelized lobe defined as High Amplitude Reflection Packets (HARP, Flood et al., 1991) that underlies a channel-levee system. The deposition of HARPs was associated with the readjustment of the longitudinal profile of the channel after the breaching of a levee, which resulted in remobilization of upslope channel deposits and eroded levees. When this adjustment was complete, erosion ceased and levees began to develop above the HARPs (Pirmez et al., 1997). All the identified phases of avulsion followed the same pattern: (1) breaching of the lower and narrower left levee; (2) building of a unit of High Amplitude Reflector Packets (HARP) basinward of the bifurcation point by the unchannelized flow, while the former channel was abandoned; and (3) initiation of a new meandering leveed channel. The northward migration of the resulting units through repeated bifurcations is influenced by the asymmetry between levees (hence by the Coriolis effect), and confined between the high levees of the initial phase of the Danube channel (to the south) and the steep relief of the Dniepr fan (to the north). Structure of the fan valley fill indicate that the erosional surfaces inside the upper channel could be formed in response of successive avulsions, by the adjustment of the longitudinal profile of the channel following the breaching of a levee wall. Sediments removed by erosion formed the HARP lobes basinward of the avulsion point. When this adjustment was complete, a channel-levee system developed downward of the bifurcation, overlying the HARPs, but also upward of this point, as a confined channel-levee system inside the erosional trough of the fan valley. Fluvial incisions identified on the continental shelf, together with the coastline location during the last active period of the Danube channel, indicated that the paleo-Danube was directed towards the head of the Danube canyon. Paleo-Danube mouth was fairly close (ca. 10 km) to the Danube canyon, supplying sediment to the Danube channel. Furthermore, hyperpycnal flow probably prevailed in the freshwater environment that characterized the Black Sea during times of fan activity. These conditions would have enabled the development of a quasi-continuous river-canyon-deep-sea fan system, ensuring the effective transfer of the sediment between the coastal zone and the deep sea.
Ce travail est consacré à l'étude de l'architecture et de l'évolution sédimentaire récente de l'éventail profond du Danube, en particulier de son dernier système chenal-levée: le chenal du Danube. L'étude a été réalisée dans le cadre du projet de coopération franco-roumaine BlaSON, à partir des données sismiques, bathymétriques-acoustiques et sédimentologiques acquises en 1998 lors d'une campagne en mer Noire réalisée par IFREMER et GeoEcoMar. Des données sismiques et acoustiques antérieures ont été également utilisées. L'éventail profond du Danube s'enserre dans la catégorie des grands éventails vaseux. Comme les autres systèmes de ce genre (tel que les éventails de l'Amazone, du Mississippi ou de l'Indus) il est constitué d'une succession de systèmes chenaux-levées intercalés avec des dépôts de transport en masse. Le fonctionnement de l'éventail était conditionné par la baisse du niveau marin lors des périodes glaciaires. Ses faciès sismiques et sédimentaires s'apparentent aux faciès qui caractérisent la plupart des éventails de ce type. L'éventail du Danube constitue néanmoins un cas particulier parmi les autres systèmes étudiés, du fait de son fonctionnement dans un bassin lacustre. Ceci est dû à la situation spécifique de la mer Noire dont la connexion avec la Méditerranée, par le détroit de Bosphore et la mer de Marmara, a été successivement interrompue (au cours de périodes de bas niveau) et reprise (quand le niveau marin remontait en dépassant le seuil du Bosphore). L'absence de l'apport d'eau salée pendant les périodes glaciaires, associée avec l'augmentation de l'apport fluvial, ont déterminé l'installation d'un milieu d'eau douce dans la mer Noire à chaque fois que la baisse du niveau permettait la reprise du fonctionnement de l'éventail profond. Cette situation particulière aurait favorisé la formation des courants hyperpycnaux à l'embouchure d'un fleuve du débit du Danube qui déversait ses eaux turbides dans un bassin lacustre, et aurait donc influencé l'apparition de courants de turbidité dans l'éventail profond. Le chenal du Danube s'est développé sur la pente continentale en prolongation du canyon du Danube (ou Viteaz) auquel il est directement connecté. Le canyon est incisé de manière significative (26 km) dans la plate-forme continentale. Au cours de bas-niveaux marins il constituait la principale voie de transfert des sédiments terrigènes vers le bassin profond dans cette partie de la marge. Le canyon est constitué par une entaille avec des flancs abrupts et un talweg axial incisé, qui montre l'importance du processus d'érosion du fond pour le développement du canyon. Les segments qui ont été identifiés le long du canyon, avec des morphologies, des orientations et des pentes spécifiques, sont interprétés comme des phases d'avancement du canyon vers la côte. Plusieurs incisions sont visibles dans la structure interne du canyon et témoignent que la morphologie actuelle du canyon est le résultat de son évolution polyphasée. L'instabilité de la zone du canyon est en relation avec les apports sédimentaires importants à l'embouchure du Danube, avec la présence du gaz dans les sédiments superficiels, et possiblement sous un contrôle structural. Sur la pente supérieure (entre le canyon du Danube et environ 1400 m de profondeur) le chenal du Danube présente des levées bien développées et fortement asymétriques, avec la levée droite plus haute et plus large que la levée gauche. Ce type d'asymétrie, fréquemment décrit dans les éventails profonds est généralement attribué à l'effet Coriolis (Menard, 1955). Le chenal est légèrement sinueux, partiellement comblé et incisé par un talweg axial qui représente la continuation sur la pente du talweg incisé dans le canyon du Danube. L'analyse sismique détaillée du remplissage de la vallée montre plusieurs phases de dépôt, séparées par des discontinuités érosives. Ces surfaces d'érosion correspondent à des terrasses emboîtées, relativement parallèles le long de la vallée, visibles dans la bathymétrie. Les dépôts qui constituent le remplissage du chenal présentent un faciès sismique de type HAR (High Amplitude Reflections) dans l'axe du chenal, partiellement (ou parfois totalement) enlevé par les phases d'érosion subséquentes, qui continue latéralement avec des réflexions litées correspondant à un faciès sédimentaire de levée. Le remplissage de la vallée a été donc associé avec des écoulements dans le chenal, et non pas avec l'interruption de son fonctionnement. Sur la pente inférieure, le chenal unique bifurque plusieurs fois par avulsion et forme de nouveaux systèmes chenaux-levées méandriformes. Ces systèmes se succèdent verticalement en onlap, ce qui montre qu'un seul chenal a été actif à la fois. Chaque phase d'avulsion a eu comme résultat la mise en place d'une unité constituée par un lobe défini comme "High Amplitude Reflection Packets" (HARP, Flood et al., 1991) à la base, et un système chenal-levée au sommet. Le dépôt d'un lobe HARP est associé avec de l'érosion dans le chenal en amont du point d'avulsion pour l'ajustement de son profil après la rupture de la levée. Quand le chenal a retrouvé son profil d'équilibre, l'érosion a cessé et des levées ont commencé à se développer au-dessus des HARPs (Pirmez et al., 1997). Toutes les phases d'avulsion se sont développées d'après le même modèle: (1) la rupture de la levée gauche, plus étroite; (2) le dépôt d'un lobe HARP par les écoulements non-chenalisés en aval du point d'avulsion, et l'abandon de l'ancien chenal; (3) l'initiation d'un nouveau système chenal-levée. La migration systématique du chenal vers le nord est influencée par l'assymétrie des levées (donc par la force de Coriolis), et confinée entre les grandes levées de la phase initiale du chenal du Danube, au sud, et le relief abrupt de l'éventail du Dniepr au nord. La structure sédimentaire du chenal du Danube indique que les surfaces érosives à l'intérieur du remplissage du chenal se seraient formées en réponse aux avulsions, du fait de l'ajustement du profil du chenal après la rupture d'une levée. Les sédiments du chenal érodés au cours de ce processus ont formé les lobes HARP. Quand le chenal a retrouvé son profil d'équilibre, un système chenal-levée s'est développé en aval du point d'avulsion au dessus du lobe HARP, mais aussi en amont de ce point, où il se trouve confiné dans la vallée érosive. Les incisions fluviatiles identifiés sur la plate-forme continentale et la position de la ligne de côte pendant la dernière période d'activité du chenal du Danube montrent que le paléo-Danube se dirigeait directement vers la tête du canyon du Danube. Son embouchure était située à proximité du canyon, qui alimentait le chenal du Danube. Cependant, les courants hyperpycnaux devaient prévaloir dans le milieu de salinité réduite qui caractérisait la mer Noire lors des périodes actives de l'éventail. Ces conditions auraient favorisé la mise en place d'un système quasi-continu fleuve-canyon-éventail profond, qui contrôlait le transfert des sédiments entre la côte et le bassin profond.

Droits : info:eu-repo/semantics/openAccess
http://archimer.ifremer.fr/doc/2002/these-1206.pdf
http://archimer.ifremer.fr/doc/00000/1206/

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The southernmost part of the Ryukyu subduction, where the Philippine Sea Plate is subducting under the Eurasian Plate, is known to be a very seismically active region of transition from a north-dipping subduction along the Ryukyu subduction to an ~ SE-NW collision along the Taiwanese orogenic wedge. In this paper, we will focus on the Ryukyu forearc area close to Taiwan where the deformation is paroxysmal. In order to decipher the nature of the seismic deformation in this region, a three month passive experiment, combining 22 Ocean Bottom Seismometers and 51 onland stations, has been led. Starting from an a-priori heterogeneous model, we have obtained 801 well-located earthquake hypocenters, a precise P-wave tomography model and 14 focal mechanisms. The seismicity along the Ryukyu forearc is mainly located not only in the vicinity of the Interplate Seismogenic Zone (ISZ) but also within both the subducting PSP and the overriding plate. Seismicity within the upper-plate is essentially localized east of Nanao basin where NW-SE extension occurs, and northwest of the Hoping basin where strike-slip dominates. As revealed by both the P-wave velocity structure and the newly derived seismicity, we argue that a sub-vertical step offsetting the subducting PSP around 10 km may support the presence of a trench-parallel tear. The PSP also undergoes extension in its upper part that is probably caused by buckling and slab pull. The P-wave velocity structure reveals three other major features: (1) a continuity between the Central Range and the Ryukyu Arc with a shallower Moho (~ 30 km depth) between ~ 122.3°N and ~ 122.5°N along the Ryukyu Arc, (2) high P-wave velocities along the eastern side of the Central Range and, (3) two bodies with similar high crustal velocities (6.5-7.0 km/s) at 12-18 km depths, embedded within the Ryukyu arc basement, just north of Hoping Basin and north of the Nanao Basin.
ISSN: 0040-1951

hal-00795521
https://hal.archives-ouvertes.fr/hal-00795521
DOI : 10.1016/j.tecto.2012.04.011

Éditeur(s) : HAL CCSD
Résumé : Joint inversions are now commonly used in Earth Sciences. They have been developed to better understand Earth structure since they provide more constraints on the inverted parameters. We propose a new process to simultaneously invert several data sets in order to better image 3-D crustal and upper mantle structures. Our inversion uses 3 kind of data which present a good complementarity : (1) P receiver functions to provide Moho depth variations, (2) teleseismic delay times of P waves to retrieve velocity anomalies in the crust and upper mantle, (3) gravity anomalies to image density variations at lithospheric scale. In our scheme, receiver functions are first inverted. The resulting Moho depths are then interpolated and incorporated as a priori information into the joint inversion of teleseismic delay times and gravity anomalies process. In our new approach, we perform a model space search for Moho variations, P-velocity and density structure to find acceptable fit to the three data sets. In order to preferentially sample the good data fit region, we chose the Neighborhood algorithm of Sambridge to optimistically survey the model space. We model the delay times with a 3-D raytracing using velocity nodes evenly spaced and linked with density nodes via a linear relationship. This relationship can evolve through depth, simulating its pressure dependance. We test our scheme on synthetic examples, and apply the method in a continental rifting region where deformation processes are complex and badly known. This joint inversion thus provides more constraints on the inverted parameters, and allows us to better image crust - mantle interactions in the case of the Hangai dome (Central Mongolia). Indeed, in this area, we expect an asthenospheric upwelling to dynamically support the topography, but we image a density - velocity anomaly in the lower crust. The effects on topography and the origin (composition vs. thermal) of this anomaly are still under debate.
Les inversions conjointes sont maintenant communément utilisées en Sciences de la Terre. Elles ont été développées afin d'améliorer notre connaissance et compréhension de la structure interne de la Terre puisqu'elles apportent de plus en plus de contraintes sur les paramètres inversés. Dans cette thèse, nous proposons un nouveau processus d'inversion conjointe qui prend en compte trois paramètres différents et qui mène à l'obtention d'un modèle lithosphérique tridimensionnel. Notre méthode utilise trois types de données gravimétriques et sismologiques qui présentent une bonne complémentarité : (1) Les fonctions récepteur P afin d'obtenir les variations de profondeur du Moho, (2) les délais de temps d'arrivées P des téléséismes pour retrouver les anomalies de vitesse dans la croûte et le manteau supérieur, (3) les anomalies gravimétriques qui donnent accès aux variations de densité à l'échelle lithosphérique. Dans le schéma d'inversion proposé, nous inversons d'abord les fonctions récepteur. Les variations de profondeur du Moho qui en résultent sont alors interpolées puis incorporées comme information a priori dans le processus d'inversion conjointe gravimétrie - tomographie télésismique. Que ce soit pour les fonctions récepteur ou pour la partie conjointe, notre méthode d'inversion se base sur un algorithme de recherche afin de trouver la structure qui minimise l'écart aux trois types de données. Nous avons opté pour l'algorithme de voisinage qui présente l'avantage de concentrer sa recherche dans les régions qui minimisent l'écart aux données sans toutefois abandonner les autres régions afin de limiter les risques de convergence vers un minimum local. Nous utilisons un modèle 3-D constitué de noeuds de vitesse afin de modéliser les délais de temps. Ces noeuds de vitesse sont liés aux noeuds de densité grâce à une relation linéaire entre vitesse et densité. Cette relation peut évoluer avec la profondeur de manière à simuler les effets dus aux variations de pression. Nous avons réalisé plusieurs tests synthétiques afin d'évaluer le comportement de notre nouvelle méthode. Ils ont permis de montrer que les variations du Moho ainsi que les anomalies de vitesse et densité sont bien retrouvées. Ils ont également montré l'importance de la prise en compte de ces trois types de données dans un même schéma d'inversion, notamment en ce qui concerne la faculté de discerner les variations d'interfaces des anomalies volumiques. Nous avons ensuite appliqué la méthode dans une région continentale en phase de rifting où les processus de déformation sont complexes et mal connus. Notre nouvelle méthode a apporté davantage de contraintes sur les paramètres inversés et a permis d'obtenir un modèle correctement résolu de la croûte et du manteau supérieur sous le dôme de Hangai (Mongolie Centrale). Une anomalie asthénosphérique sous le dôme est souvent invoquée pour expliquer sa topographie élevée mais c'est une anomalie (en vitesse et densité) crustale (croûte inférieure) qui s'exprime dans nos modèles. Ses effets sur la topographie et son origine (compositionnelle et/ou thermique) sont encore débattus et nécessiteraient des études plus poussées (paramétriques, VP =VS, ...).
https://tel.archives-ouvertes.fr/tel-00783524

tel-00783524
https://tel.archives-ouvertes.fr/tel-00783524
https://tel.archives-ouvertes.fr/tel-00783524/document
https://tel.archives-ouvertes.fr/tel-00783524/file/Basuyau2011.pdf

Éditeur(s) : University of Tasmania, Université de Bretagne Occidentale
Résumé : Empirical evidence and the theoretical literature both point to stock sustainability and the protection of marine biodiversity as important fisheries management issues. Decision-support tools are increasingly required to operationalize the ecosystem-based approach to fisheries management. These tools need to integrate (i) ecological and socio-economic drivers of changes in fisheries and ecosystems; (ii) complex dynamics; (iii) deal with various sources of uncertainty; and (iv) incorporate multiple, rather than single objectives. The stochastic co-viability approach addresses the trade-offs associated with balancing ecological, economic and social objectives throughout time, and takes into account the complexity and uncertainty of the dynamic interactions which characterize exploited ecosystems and biodiversity. This thesis proposes an application of this co-viability approach to the sustainable management of mixed fisheries, using two contrasting case studies: the French Bay of Biscay (BoB) demersal mixed fishery and the Australian Northern Prawn Fishery (NPF). Both fisheries entail direct and indirect impacts on mixed species communities while also generating large economic returns. Their sustainability is therefore a major societal concern. A dynamic bio-economic modelling approach is used to capture the key biological and economic processes governing these fisheries, combining age- (BoB) or size- (NPF) structured models of multiple species with recruitment uncertainty, and multiple fleets (BoB) or fishing strategies (NPF). Economic uncertainties relating to input and output prices are also considered. The bioeconomic models are used to investigate how the fisheries can operate within a set of constraints relating to the preservation of Spawning Stock Biomasses (BoB) or Spawning Stock Size Indices (NPF) of a set of key target species, maintenance of the economic profitability of various fleets (BoB) or the fishery as a whole (NPF), and limitation of fishing impacts on the broader biodiversity (NPF), under a range of alternative scenarios and management strategies. Results suggest that under a status quo strategy both fisheries can be considered as biologically sustainable, while socio-economically (and ecologically in the NPF case) at risk. Despite very different management contexts and objectives, viable management strategies suggest a reduction in the number of vessels in both cases. The BoB simulations allow comparison of the trade-offs associated with different allocations of this decrease across fleets. Notably, co-viability management strategies entail a more equitable allocation of effort reductions compared to strategies aiming at maximizing economic yield. In the NPF, species catch diversification strategies are shown to perform well in controlling the levels of economic risk, by contrast with more specialized fishing strategies. Furthermore analyses emphasize the importance to the fishing industry of balancing global economic performance with inter-annual economic variability. Promising future developments based on this research involve the incorporation of a broader set of objectives including social dimensions, as well as the integration of ecological interactions, to better address the needs of ecosystem-based approaches to the sustainable harvesting of marine biodiversity.
L’objectif général de la thèse est de modéliser les principaux processus biologiques et économiques régissant des pêcheries multi-espèces et multi-flottilles afin de proposer des stratégies viables pour la gestion durable de ces pêcheries mixtes, dans un contexte stochastique et multiobjectif. Plus spécifiquement, cette thèse utilise des analyses de co-viabilité stochastique pour étudier les arbitrages entre des objectifs contradictoires de gestion (conservation, et viabilité économique et sociale) des pêcheries mixtes. Deux pêcheries mixtes sont analysées dans cette thèse: la pêcherie française mixte démersale du golfe de Gascogne et la pêcherie crevettière australienne du Nord (NPF). Ces deux pêcheries sont multi-espèces, et utilisent des stratégies multiples de pêche, induisant des impacts directs et indirects sur les écosystèmes. Cette thèse propose une application de la co-viabilité stochastique à ces deux cas, en prenant en compte leur histoire, leur contexte socio-politique et les différences dans les stratégies et objectifs de gestion. Les résultats suggèrent que le status quo peut être considéré comme une stratégie biologiquement durable mais socio économiquement à risque dans les deux pêcheries (ainsi qu’à risque écologique dans le cas de la pêcherie australienne). Les simulations réalisées pour le golfe de Gascogne permettent de comparer les arbitrages associés à différentes réductions de capacités par flottille et de montrer qu’il existe des solutions de gestion permettant la co-viabilité du système (viabilité biologique des différentes espèces considérées et viabilité socio-économique des flottilles) contrairement à des stratégies de gestion mono-spécifiques ou basées sur la maximisation de la rente. Dans la pêcherie crevettière australienne, l’analyse montre que les stratégies de diversification permettent de limiter le risque économique contrairement aux stratégies plus spécialisées.

Droits : UBO, Univ. Tasmania
http://archimer.ifremer.fr/doc/00206/31731/30134.pdf
http://archimer.ifremer.fr/doc/00206/31731/

Éditeur(s) : Ecole Nationale Supérieure Agronomique de Rennes (ENSAR)
Résumé : Artificial Fish Aggregating Devices (FADs) are known to concentrate tropical tunas. This aggregative behaviour drastically increases the vulnerability of these species to fishing. Alternatively, FADs can be used as oceanic observatories to study the aggregative behaviour of large pelagic fish. We conducted sea surveys in Martinique (Lesser Antilles) to i) establish a typology of the pelagic fish aggregations found around moored FADs ii) study their relations with their biotic and abiotic environment and the local fishery. The mean biomass of large pelagic fish aggregations was also estimated to provide scientific inputs to achieve a sustainable management of the moored FAD fishery. The first part presents the background of the study. We introduce the regional pelagic ecosystem, the aggregative behaviour of pelagic fish around FADs and the Martinican moored FAD fishery. The second part begins with a presentation of the conceptual framework of the study: the hierarchy theory. Observation scales and survey methodology are therefore described. Repeated echosounder surveys run in a star pattern were conducted around 2 moored FADs, in combination with underwater video observations, classical fishing experiments and CTD profiles. In the third part, the elements of the [moored FAD ¿ pelagic fish - environment - fishing] system and their interactions are numerically characterised in the vertical plane. The main type of pelagic fish aggregation was a large aggregation distributed in sub-surface (40-100 m) within a radius of 400 m of the FAD. This aggregation was mostly made of 60 cm FL blackfin tunas (Thunnus atlanticus). It appeared at sunrise and mostly spread away in the late afternoon. It was observed during all daytime surveys. The average density and the vertical structure of the micronektonic sound scattering layers (SSLs) were assessed locally around a FAD for 48h cycles. These SSLs descriptors showed positive correlation with the size and the abundance of the sub-surface tuna aggregation. Whereas this aggregation accounted for about 95% of the total biomass aggregated around a moored FAD, it was nearly unexploited by the local commercial fishermen. The fourth part focuses on the sub-surface tuna aggregation. A high variability of the spatial distribution of the aggregation was evidenced in the horizontal plane at daily, day to day and monthly temporal scales. These variations were related to fluctuations of the global abundance of the aggregation. The daytime average density of sub-surface tuna was modelled as a function of the distance to FAD, within an advection-diffusion framework. Based on these results, a universal kriging model was designed to assess the mean maximum daily biomass of the sub-surface tuna aggregation. This mean biomass estimate yielded 11 tons with an estimation error of 26%. To conclude, we present a hierarchical organization in space and time of a sub-surface tuna population distributed within a network of moored FADs, from micro to meso-scale. We suggest that the spatial distribution of tunas can be explained from fine to coarse-scales by behavioural processes (self-organization, feeding, aggregative behaviour) whereas their spatial distribution is mainly forced by environmental processes at broader scales.
L'utilisation de Dispositifs de Concentration de Poissons permet de provoquer la formation de larges agrégations de thonidés autour de dispositifs artificiels, ce qui augmente considérablement la vulnérabilité de ces ressources vis-à-vis de l'exploitation halieutique. Les DCP peuvent également être utilisés en tant qu'observatoires océaniques, afin d'étudier le comportement agrégatif du macronecton pélagique. Nous avons ainsi réalisé des observations autour de DCP ancrés en Martinique, afin de définir une typologie des agrégations de macronecton et de étudier leurs relations avec leur environnement biotique, abiotique et l'exploitation halieutique locale. Nous avons ensuite estimé la biomasse moyenne de macronecton agrégé autour d'un DCP ancré, afin de fournir des éléments scientifiques nécessaires à une gestion durable de ces ressources. La première partie présente le contexte de l'étude i.e. l'écosystème pélagique régional, le phénomène d'agrégation du macronecton autour des DCP et la pêche associée aux DCP ancrés en Martinique. La deuxième partie introduit la théorie de la hiérarchie qui a fourni le cadre conceptuel de l'étude et présente les échelles et méthodes d'observation. Le principal outil d'observation est un échosondeur scientifique, mis en oeuvre le long de parcours en étoile autour du DCP. Les prospections acoustiques ont été combinées à des observations vidéo sous marines, des pêches expérimentales et un suivi in-situ de l'environnement abiotique. La troisième partie présente une typologie des éléments constituant le système [DCP ancré - macronecton - environnement - pêche] dans le plan vertical et précise leurs interactions. Le type d'agrégation de macronecton dominant est une grande agrégation composée d'une majorité de thons noirs (Thunnus atlanticus) de taille moyenne (60 cm) distribuée en sub-surface (40-100 m), dans un rayon de 300 m autour de la tête des DCP. Cette agrégation se forme au lever du soleil et se disperse presque totalement dans l'après midi. Elle a été observée de jour lors de toutes les campagnes. Une corrélation positive entre la densité et la structure moyenne des couches micronectoniques diurnes évaluée localement autour du DCP au cours de 48 h et les dimensions et l'énergie acoustique de l'agrégation de thons de subs-surface a été mise en évidence. Malgré le fait que cette agrégation représente en moyenne 95 % de l'énergie acoustique du macronecton autour des DCP, elle est presque inexploitée par les pêcheurs artisans locaux. La quatrième partie met en évidence les fortes variations conjointes de la distribution spatiale dans le plan horizontal de la densité de l'agrégation de thons de sub-surface et de son abondance globale. Ces variations ont été observées au cours du cycle nycthéméral et aux échelles inter-journalières et mensuelles. La distribution spatiale moyenne de la densité diurne de l'agrégation en fonction de la distance au centre de gravité de l'agrégation est cependant très stable et peut être modélisée au moyen d'une équation d'advection-diffusion. Un modèle de krigeage universel, utilisant les résultats du modèle d'advection-diffusion, a permis d'évaluer la biomasse maximale journalière moyenne de l'agrégation de thons de sub-surface à une dizaine de tonnes, avec un coefficient de variation d'estimation de 26%. Nous proposons une représentation hiérarchique synthétique de la distribution spatiale d'une sous-population de thons dans un réseau de DCP ancrés de la micro à la méso-échelle. Nous suggérons que la distribution spatiale des thons est déterminée principalement à l'échelle fine (100m-1km) et à l'échelle grossière (1-10 km) par des processus comportementaux (auto-organisation, agrégation, nutrition) et par des processus environnementaux à échelle plus large.

Droits : info:eu-repo/semantics/openAccess
http://archimer.ifremer.fr/doc/2006/these-1735.pdf
http://archimer.ifremer.fr/doc/2006/sup-1735.pdf
http://archimer.ifremer.fr/doc/00000/1735/

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Analog sandbox models have been set up to study the impact of syntectonic erosion on thrust wedges with one and two decollement levels. Different accretion mechanisms are activated depending on interactions between surface processes and wedge mechanics: frontal accretion, backthrusting, underthrusting and underplating due to decollement induced duplex formation at depth. These mechanisms may function simultaneously, being located at different parts across the wedge. For all the experiments, a high friction is imposed at the base of models and the volume of eroded material remains equal to the volume of newly accreted material, maintaining a constant surface slope during the shortening. Erosion limits the forward propagation of thrust wedges and favors the underthrusting of basal layers allowing duplex formation. Erosion promotes development of major backthrusts in the thrust wedges without or with one decollement, but no backthrusts was formed in the wedges with two decollements. Slow erosion allows lower extent of basal underthrusting in comparison with regular-rate erosion. Variations in the erosion taper lead to changes in duplex geometry and exhumation rate in thrust wedges with one or two decollements. The 6 degrees erosion taper promotes formation of antiformal stack at the rear part of thrust wedge, high rate of basal underthrusting and high extent of erosional removal. The cover layers are nearly completely eroded above the antiformal stack and form the synformal klippe in frontal part of thrust wedges. The 8 degrees erosion taper allows development of individual ramp-anticlines and active forward thrusting of cover layers above the decollement and low rate of basal underplating below it, with consequent low extent of erosional removal. The results of our experiments support the observations on structural evolution and erosion in the Alberta Foothills of the Canadian Rockies.
ISSN: 0040-1951

hal-00617769
https://hal.archives-ouvertes.fr/hal-00617769
DOI : 10.1016/j.tecto.2011.01.020