Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Serpentinites are one of the major components of the oceanic lithosphere and are stable in the slab and the mantle wedge up to 100-150 km depth in subduction zones. During oceanic mantle hydration and alteration, they trap trace and fluid mobile (FME: B, Li, As, Sb, Rb, Ba, Cs, Sr, U and Pb) elements that participate to elemental transfer occurring between the dehydrating slab and the mantle wedge in subduction context. The Lanzo massif is an eclogitized oceanic lithosphere that preserved its oceanic structure and recorded different steps of serpentinization/de-serpentinization from oceanic lizardite to prograde antigorite in subduction context, up to its dehydration and secondary olivine crystallization, and finally retrograde antigorite during massif exhumation. It constitutes a suitable place to study trace element behavior during serpentinization/de-serpentinization processes and associated chemical transfers between the different envelopes of the oceanic lithosphere and the mantle wedge. Geochemical analyses of serpentine and associated minerals show that the serpentinization/de-serpentinization of the Lanzo massif took place in a relatively closed system without significant trace element transfer between the different parts of the oceanic lithosphere. In the deeper part of the lithosphere, from the slightly serpentinized mantle peridotites (SSP, < 20% serpentinization) to the paleo-Moho, composed of massive serpentinites (MS, 80% serpentinization), the trace elements mobility is reduced. The chemical composition of lizardite and antigorite is homogenized with the local degree of serpentinization: in SSP, serpentine veins composition is inherited from the host mineral while, in MS, their composition is homogenous between destabilized phases at the scale of the outcrop (~ 5 m). In the shallowest part of the oceanic lithosphere, from the paleo-Moho to the oceanic paleo-seafloor, the serpentinites are foliated (FS, > 90% serpentinization). In that zone, the alpine deformation enhances the mobility of trace elements and permits their redistribution and the homogenization of antigorite composition at massif scale. Locally, in the SSP and MS, the crystallization of metamorphic veins of ~ 1-2 m corresponds to channelized fluid flows that allowed fluid transfers - and thereby trace elements - to longer distance. The successive crystallizations of antigorite and then olivine are accompanied by a diminution of some FME (B, Li, As, Sb, Ba, Rb) and Eu contents attesting that these elements are removed from slab to mantle wedge during subduction.
ISSN: 0009-2541

hal-00937661
https://hal.archives-ouvertes.fr/hal-00937661
DOI : 10.1016/j.chemgeo.2013.08.025

Éditeur(s) : HAL CCSD
Résumé : International audience
The purpose of our study is to model a geothermal reservoir. When geothermal reservoir are assumed to be composed of pure water, the transfer of mass and energy is classically described by two balance equations: mass balance equation and the energy balance equation. In addition to those equations, fluid velocity ist classically given by the Darcy law while thermodynamic properties, inferred from theoretical or empirical equations of state, are used to close the mathematical system. Once this system is closed, there exist different solutions. The first one is to solve for pressure and temperature with a variable switch to saturation in the two-phase region (e.g. TOUGH2). The second one is to solve for pressure and enthalpy to increase stability of phase transition between single and two-phase states (e.g. Hydrotherm). We adopted the second option and chose te use a splitting method to get rid of the complexity of coupling equations and a finite volume method for the spatial discretization. Selecting object-oriented languages, we developed a multi-language framework, combining Python, Fortran and a C++ implementation of IAPWS (from the freesteam project) including the supercritical equations, in porous media velocity is given by Darcy law and to close the system physical properties are determined by the IAPWS-IF97 thermodynamic formulation. We resolve the equations in pressure and enthalpy instead of pressure and temperature in order to increase stability and to handle easier the passage from a single-phase to a two-phase system. We solve the system by using a splitting method - to get rid of the complexity of coupling equations - and a finite volume method. We offer some freedom to users thanks to the implementation of several methods like explicit or implicit Euler, Runge-Kutta or BDF2 for time solvers or GMRES and BICGSTAB for the linear solver. We can handle several boundary conditions like no-flow - describing a boundary which can not exchange matter with the exterior - or like a mixed-therm condition - a Dirichlet condition to the pressure and a Dirichlet or an outflow condition to the temperature in order to describe a recharge or a discharge zone - ... We're developing a multi-language framework, combining Python, Fortran and the C++ implementation of IAPWS (from the freesteam project). All these languages are object-oriented. We've applied this simulation model to the dogger in Paris, France, to several one-dimensional systems and a two-dimensional one made by Coumou with the CSMP++ platform. The dogger is a reservoir exploited to produce heat by pumping water at 70 and reinjecting it in the reservoir at 40. In the one-dimensional systems we wanted to observe the process of heat transfer from a higher temperature boundary to a smaller one in a high-energy domain. The last simulation shows the natural convection of water in a fault. For every simulation we compared the solutions we found with an other code (TOUGH2 or CSMP++) and they agreed. The next step will be to model the geothermal plant in Guadeloupe, West Indies. It's the only place in France - and in the West Indies so far - producing electricity with the earth power. The temperature can reach up to 1000 and the pressure range is around a few hundreds MPa. In some surface zones we can see two-phase water at atmospheric pressure. In the 1980s Bouillante was a laboratory for France. Since 1995 Bouillante has given 30GWh electricity a year to the Guadeloupeans.
PROCEEDINGS, Thirty-Ninth Workshop on Geothermal Reservoir Engineering
Stanford, United States

Droits : info:eu-repo/semantics/OpenAccess
hal-00944133
https://hal-brgm.archives-ouvertes.fr/hal-00944133
https://hal-brgm.archives-ouvertes.fr/hal-00944133/document
https://hal-brgm.archives-ouvertes.fr/hal-00944133/file/Copol.pdf

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The dating of alluvial landforms by cosmogenic nuclides requires distinguishing the pre-deposition inheritance from the post-deposition history of the clasts in the studied marker. Moreover, estimating catchment-scale erosion rates from the concentrations of cosmogenic nuclides in active alluvia requires a good knowledge of the local/regional relationships between rock exhumation and transport through space and time. This is still poorly known for timescales of tens of thousand years. In order to document the evolution of clast exhumation and transport rates through time, we analyze in situ 10Be concentrations in boulders and cobbles from hillslopes to outlet of an arid mountainous catchment located in Gobi-Altay, Mongolia, strongly affected by global climatic changes during the Pleistocene-Holocene period. Samples were collected on bedrock, abandoned alluvial deposits, active colluvia and alluvia. Our results show a large 10Be scattering in the active river bed, consistent with a low and discontinuous catchment erosion rate dominated by mass wasting and fluvial incision. On the contrary, pre-exposure signal within abandoned terraces is much more homogeneous, consistent with climatic pulses responsible of strong erosional events on hillslopes and rapid fluvial transport. These results show that exhumation/transport processes at the catchment scale vary in style and intensity through time as a consequence of climatic oscillations. The occurrence of abrupt climatic changes during short periods of time recorded by 10Be concentrations in abandoned alluvia raise questions about the temporal applicability of catchment erosion rates derived from cosmogenic nuclide concentrations measured in sediments of active rivers. On the other hand, strong and short erosion events limit and homogenize the pre-exposure 10Be signal in associated deposits like debris-flows, making them particularly suitable markers for dating in active tectonic and paleoclimatic studies.
ISSN: 0169-555X

hal-00626702
https://hal.archives-ouvertes.fr/hal-00626702
https://hal.archives-ouvertes.fr/hal-00626702/document
https://hal.archives-ouvertes.fr/hal-00626702/file/GEOMOR-2485R1_corrected.pdf
DOI : 10.1016/j.geomorph.2011.07.023

Éditeur(s) : HAL CCSD
Résumé : Patagonia is well known for spectacular occurrences of a variety of glacial-derived landforms and deposits and for a long history of ancient glaciations. In this paper, we first review the diverse evidence that demonstrates the development of glacial-related sedimentary units within the Central Patagonian Cordillera since 7 Ma. Well preserved glacial landforrns at the top surface of mesetas on both sides of the Lago General Carrera-Buenos Aires are described: the Meseta Guenguel to the north, and the volcanic Meseta del Lago Buenos Aires to the south. The latter meseta corresponds to a 3 Ma old, morphologically inverted paleo-piedmont, based on Ar/Ar dates of the uppermost lava flows. It shows evidence of glacier advances to the NE direction. Over a distance of 20 km, glacial landforms observed by remote sensing data and digital elevation model define glacial tongues that were fed by the Cordillera reliefs to the west. These lobes are now beheaded from their westward sources along a morpho-structural corridor that bounds the Meseta del Lago Buenos Aires to the west. These remnants can be correlated with the oldest glacial landforms recognized north of Lago General Carrera-Buenos Aires, on the Meseta Guenguel that form the Chipanque moraine system. From these features it is concluded that the glacial drainage network of Central Patagonia has been strongly modified following relief inversion in response to erosion processes and to tectonic causes. Changes occurred after 3 Ma, from a smooth piedmont surface covered by an extensive ice mantle ending with ample glacial lobes, to the current series of deeply incised glacial valleys such as the Lago General Carrera-Buenos Aires depression. These new data bear important constraints on the history and development of the first glaciations in southern South America.
ANDEAN GEOLOGY

hal-00512682
https://hal.archives-ouvertes.fr/hal-00512682

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The present study aims at better deciphering the different mechanisms involved in the functioning of the subduction interplate. A 2D thermo-mechanical model is used to simulate a subduction channel, made of oceanic crust, free to evolve. Convergence at constant rate is imposed under a 100 km thick upper plate. Pseudo-brittle and non-Newtonian behaviours are modelled. The influence of the subduction channel strength, parameterized by the difference in activation energy between crust and mantle () is investigated to examine in detail the variations in depth of the subduction plane down-dip extent, . First, simulations show that numerical resolution may be responsible for an artificial and significant shallowing of if the weak crustal layer is not correctly resolved. Second, if the age of the subducting plate is 100 Myr, subduction occurs for any . The stiffer the crust is, that is, the lower is, the shallower is (60 km depth if kJ/mol) and the hotter the fore-arc base is. Conversely, imposing a very weak subduction channel ( J/mol) leads there to an extreme mantle wedge cooling and inhibits mantle melting in wet conditions. Partial kinematic coupling at the fore-arc base occurs if kJ/mol. If the incoming plate is 20 Myr old, subduction can occur under the conditions that the crust is either stiff and denser than the mantle, or weak and buoyant. In the latter condition, cold crust plumes rise from the subduction channel and ascend through the upper lithosphere, triggering (1) partial kinematic coupling under the fore-arc, (2) fore-arc lithosphere cooling, and (3) partial or complete hindrance of wet mantle melting. then ranges from 50 to more than 250 km depth and is time-dependent if crust plumes form. Finally, subduction plane dynamics is intimately linked to the regime of subduction-induced corner flow. Two different intervals of are underlined: 80–120 kJ/mol to reproduce the range of slab surface temperature inferred from geothermometry, and 10–40 kJ/mol to reproduce the shallow hot mantle wedge core inferred from conditions of last equilibration of near-primary arc magmas and seismic tomographies. Therefore, an extra process controlling mantle wedge dynamics is needed to satisfy simultaneously the aforementioned observations. A mantle viscosity reduction, by a factor 4–20, caused by metasomatism in the mantle wedge is proposed. From these results, I conclude that the subduction channel down-dip extent, , should depend on the subduction setting, to be consistent with the observed variability of sub-arc depths of the subducting plate surface.
ISSN: 0031-9201

hal-01623155
https://hal.archives-ouvertes.fr/hal-01623155
DOI : 10.1016/j.pepi.2017.05.008

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The ‘International Intercomparison Exercise of fCO₂ Systems’ was carried out in 1996 during the R/V Meteor Cruise 36/1 from Bermuda/UK to Gran Canaria/Spain. Nine groups from six countries (Australia, Denmark, France, Germany, Japan, USA) participated in this exercise, bringing together 15 participants with seven underway fugacity of carbon dioxide (fCO₂) systems, one discrete fCO₂ system, and two underway pH systems, as well as systems for discrete measurement of total alkalinity and total dissolved inorganic carbon. Here, we compare surface seawater fCO₂ measured synchronously by all participating instruments. A common infrastructure (seawater and calibration gas supply), different quality checks (performance of calibration procedures for CO2, temperature measurements) and a common procedure for calculation of final fCO₂ were provided to reduce the largest possible amount of controllable sources of error. The results show that under such conditions underway measurements of the fCO₂ in surface seawater and overlying air can be made to a high degree of agreement (±1 μatm) with a variety of possible equilibrator and system designs. Also, discrete fCO₂ measurements can be made in good agreement (±3 μatm) with underway fCO₂ data sets. However, even well-designed systems, which are operated without any obvious sign of malfunction, can show significant differences of the order of 10 μatm. Based on our results, no “best choice” for the type of the equilibrator nor specifics on its dimensions and flow rates of seawater and air can be made in regard to the achievable accuracy of the fCO₂ system. Measurements of equilibrator temperature do not seem to be made with the required accuracy resulting in significant errors in fCO₂ results. Calculation of fCO₂ from high-quality total dissolved inorganic carbon (CT) and total alkalinity (AT) measurements does not yield results comparable in accuracy and precision to fCO₂ measurements.
ISSN: 0304-4203

hal-01245605
https://hal.archives-ouvertes.fr/hal-01245605
DOI : 10.1016/S0304-4203(00)00080-3

Éditeur(s) : HAL CCSD
Résumé : International audience
Debris avalanches derived from the flanks of volcanic islands are among the largest on Earth. Debris avalanches are rare, catastrophic destabilizations that still keep geologists debating about the mechanisms that initiate them and make them travel huge runout distances. To shed light on the trigger of such destabilizations, we studied the inland scar of a debris avalanche deposit cropping out at Piton des Neiges, a dormant and eroded basaltic volcano of La Réunion Island. The avalanche deposit rests on a pile of 50-70 sill intrusions with a shallow northward dip, i.e. toward the sea. We measured the anisotropy of magnetic susceptibility in a transect across the uppermost sill of the pile in contact with the avalanche deposit. This transect reveals a strongly asymmetric magnetic fabric, consistent with a north-directed shear movement of the upper intrusion wall. This suggests that the upper sill induced a co-intrusive shear displacement of the volcano flank toward the sea. The upper sill margin in contact with the avalanche is striated, showing that this intrusion is older than the avalanche. Striae indicate a northward direction of avalanche runout. The upper sill margin also displays a magmatic lineation consistent with a magma flow in the intrusion toward the north. There is thus a striking kinematic consistency between the directions of intrusion propagation and avalanche runout, both oriented toward the sea. From the above results, we propose that repeated sill intrusions, such as observed on Piton des Neiges, increase the instability of a volcanic edifice. Each injection induces an incremental slip of the overlying rock mass, which may eventually end up into a landslide. Sill intrusions associated with seaward displacements of volcano flank, such as inferred for the April 2007 eruption of Piton de la Fournaise (also in La Réunion), should therefore be considered as a potential trigger of debris avalanches.
Fall meeting
San Francisco, United States

hal-01387002
http://hal.univ-reunion.fr/hal-01387002

Éditeur(s) : HAL CCSD Oxford University Press (OUP)
Résumé : International audience
Detailed structural and petrological mapping in the Beni Bousera peridotite (Rif Belt, northern Morocco) shows that this orogenic peridotite massif is composed of four tectono-metamorphic domains with consistent kinematics, marked by a pervasive, shallowly dipping foliation with a NW-SE stretching lineation that progressively rotates towards a NNE-SSW orientation in the lowermost part of the massif. From top to bottom, these domains are garnet-spinel mylonites, Ariègite subfacies fine-grained porphyroclastic spinel peridotites, Ariègite-Seiland subfacies porphyroclastic, and Seiland subfacies coarse-porphyroclastic to coarse-granular spinel peridotites. Microstructures and crystal preferred orientations point to deformation dominantly by dislocation creep in all domains, but the continuous increase in average olivine grain size indicates decreasing plastic work rates from top to bottom. This evolution in deformation conditions is consistent with the change in synkinematic pressure and temperature conditions, from 900°C at 2*0 GPa in garnet-spinel mylonites to 1150°C at 1*8 GPa in the Seiland domain. A pervasive diffuse dunitic-websteritic layering subparallel to the foliation suggests deformation in the presence of melt in the Seiland domain. Gravitational instabilities owing to local melt accumulation may account for <200 m wide areas exhibiting a vertical lineation in this domain. To account for the consistent kinematics and the tectono-metamorphic evolution, which implies a temperature gradient of c. 125°C km−1 preserved across the Beni Bousera massif, we propose that the entire massif records the functioning of a low-angle shear zone, a few kilometres wide, which accommodated exhumation of the base of the lithosphere from ∼90 to ∼60 km depth. Partial melting in the Seiland domain may be explained by fast decompression of the footwall, without the need for exotic heat sources. Moreover, if the present-day orientation of the shear zone is similar to that when it was active in the mantle, the stretching lineations at high angle to the metamorphic gradient imply that shearing parallel to the trend of the belt accompanied thinning; that is, a transtensional deformation of the margin.
ISSN: 0022-3530

hal-00950056
https://hal.archives-ouvertes.fr/hal-00950056
DOI : 10.1093/petrology/egt067

Éditeur(s) : HAL CCSD World Scientific
Résumé : The present paper presents a laboratory experiment of rip current circulations over a moveable bed. The rip current characteristics over four distinct beach morphologies, exhibiting more or less developed nature-like bar-rip morphology,were investigated. For each video run, the same off shore shore-normal waves were generated by the wave maker with the same mean water level in order to study the sensitivity of the rip current characteristics as a function of the beach morphology only. In each case, a 1-hour video run was used to track a large number (~30) of drifters released within the surf zone. Image coordinates were then rectifie d to still water level Cartesian coordinates to compute drifter velocities, mean characteristics and surf zone rete ntion rates. Results show the presence of classic rip current patterns with counter-rotating cells and a relatively narrowoffshore-directed jet with, for three of the situations, a reasonably symmetric shape. Non-surprisingly, it was found that rip current intensity increases with increasing relative depth of the rip channel. The wave-driven circulations were strongly unstable. Computed standard deviation in fl ow intensity and direction provides high resolution information on the spatial variability of the rip current insta bilities with, for instance, highly-pulsating and weakly directionally variable offshore-directed flow in the rip channel. Conversely to what was previously hypothesized in the literature, there was hardly trace of vortices being shed offs hore and drifters exiting the surf zone compartment were not systematically caught by a pulsating jet. The cause for drifter exiting the semi-enclosed surf zone compartment remains, however, elusive and deserves further investigations. The computed surf zone retention rates (~90%) were of the order of those previously observed in the field, with no clear relationship with the mean rip current velocity or relative depth of the rip channel. Further video-runs will have to be analyzed to explore potential explanations
Proceedings of Coastal Dynamics 2009 Impacts of Human Activities on Dynamic Coastal Processes

ISBN : 978-981-4282-46
hal-00854534
https://hal.archives-ouvertes.fr/hal-00854534

Éditeur(s) : HAL CCSD
Résumé : International audience
Wound healing is important for sharks from the earliest life stages, for example, as the 'umbilical scar' in viviparous species heals, and throughout adulthood, when sharks can incur a range of external injuries from natural and anthropogenic sources. Despite anecdotal accounts of rapid healing in elasmobranchs, data regarding recovery and survival of individuals from different wound or injury types has not been systematically collected. The present study documented: (i) 'umbilical scar' healing in wild-caught, neonatal blacktip reef sharks while being reared for 30 days in flow-through laboratory aquaria in French Polynesia; (ii) survival and recovery of free-swimming blacktip reef sharks in Australia and French Polynesia following a range of injuries; and (iii) long-term survival following suspected shark-finning activities. Laboratory monitoring, tag-recapture records, telemetry data and photo-identification records suggest that blacktip reef sharks have a high capacity to survive and recover from small or even large and severe wounds. Healing rates, recovery and survival are important factors to consider when assessing impacts of habitat degradation and fishing stress on shark populations. The present study suggests that individual survival may depend more on handling practices and physiological stress rather than the extent of physical injury. These observations also contribute to discussions regarding the ethics of tagging practices used in elasmobranch research and provide baseline healing rates that may increase the accuracy in estimating reproductive timing inferred from mating scars and birth dates for neonatal sharks based on umbilical scar healing status. Cite as: Chin A, Mourier J, Rummer JL (2015) Blacktip reef sharks (Carcharhinus melanopterus) show high capacity for wound healing and recovery following injury. Conserv Physiol 3: doi:10.1093/conphys/cov062.
Conservation physiology

Droits : http://creativecommons.org/licenses/by/
hal-01250745
https://hal-univ-perp.archives-ouvertes.fr/hal-01250745
https://hal-univ-perp.archives-ouvertes.fr/hal-01250745/document
https://hal-univ-perp.archives-ouvertes.fr/hal-01250745/file/Conserv%20Physiol-2015-Chin-.pdf
DOI : 10.1093/conphys/cov062

Éditeur(s) : HAL CCSD Elsevier
Résumé : While most rocks from active volcanoes display ((210)pb/Ra-226) activity ratios lower than or close to the equilibrium value of 1, several other have ratios much higher than 1. Transfer of Rn-222 by magmatic volatiles has often been advocated to explain both Pb-210 deficits and excesses. We develop here a model to account for Pb-210 excesses through Rn-222 accumulation. We show that large Pb-210 excesses can be readily obtained, even for moderate ratios of degassing magma over accumulating magma, in a closed-system model where the Rn-222 atoms produced by decay of Ra-226 in the degassing magma are continuously extracted by a gas phase. For a given duration of volatile transfer, relative Pb-210 excesses are expected to be much larger than Pb-210 deficits. This model is applied to samples from Santorini (Aegean arc) and Surtsey (Iceland) both of which show high ((210)pb/Ra-226) ratios of 6.7 and 2.3 respectively at the time of eruption. The agreement with field data suggests that Rn-222 accumulation leading to Pb-210 excesses might be a rather common process in zoned magma chambers as well as in individual lava flows, and that it can be described by a closed-system model.
ISSN: 0012-821X

hal-00496398
https://hal.archives-ouvertes.fr/hal-00496398
DOI : 10.1016/j.epsl.2010.02.048

Éditeur(s) : HAL CCSD Oxford University Press (OUP)
Résumé : International audience
We investigate the deformation induced by water pressure variations in hydrologically active natural fractures, and recorded by tiltmeters and strainmeters. The deformation associated with a single fracture is derived using finite-element modelling (FEM). A range in fracture geometries is explored, first to highlight the sensitivity of each geometrical parameter to the deformation, and secondly to allow transfer to observation sites. Water level variations in the fracture are then derived from a hydrological model, driven by observed rainfall, and calibrated on fracture water flow measurements. The modelling results are explicitly applied to constrain the local hydrological contribution to observations with the 100-m-long hydrostatic tiltmeter installed at Sainte-Croix-aux-Mines (France). Our study shows that well-founded physical modelling of local hydrological effect allows a substantial correction of records in observatories.
ISSN: 0956-540X

hal-00708093
https://hal.archives-ouvertes.fr/hal-00708093
https://hal.archives-ouvertes.fr/hal-00708093/document
https://hal.archives-ouvertes.fr/hal-00708093/file/fracture_v72.pdf
BIBCODE : 2009GeoJI.178..667L

Éditeur(s) : HAL CCSD Geological Society of America
Résumé : International audience
Porous sandstones tend to deform by the formation of low-permeability deformation bands that influence fluid flow in reservoir settings. The bands may be distributed or localized into clusters, and limited recent data suggest that tectonic regime may exert control on their distribution and clustering. In order to explore this suggestion, we performed a synthetic analysis based of 73 sets of bands, including 22 new sets measured for a reverse Andersonian regime that fill the important gap in data for this context. We find a surprisingly strong correlation between clustering and tectonic regime, where bands clearly are more distributed in the reverse regime compared to the normal regime. Together with the observed band distributions, capillary pressure data show evidence that efficient membrane seals are expected for extension, whereas pervasive permeability anisotropy is expected for contraction. Such a basic new rule concerning tectonic regime is very useful for assessment of reservoir properties where deformation bands are common but below seismic resolution.
ISSN: 0091-7613

hal-01355925
https://hal.archives-ouvertes.fr/hal-01355925
DOI : 10.1130/G37585.1

Éditeur(s) : HAL CCSD Springer Verlag
Résumé : International audience
Unravelling the detailed pressure–temperature–time-deformation (P–T–t-D) evolution of magmatic and metamorphic rocks provides essential insights into the timing and duration of partial melting and related plutonism during crustal flow and migmatitic dome formation. The Montagne Noire Axial Zone (MNAZ) is a migmatitic dome located within the Variscan orogen in the southern French Massif Central. The timing of the main thermal event that was responsible for intense partial melting is still highly debated. In this study we present new laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS) age data on micaschists, migmatites and granites that clarify the P–T–t-D evolution of the MNAZ. Structurally controlled samples were collected in order to constrain the timing of metamorphism, migmatization and plutonism regarding the main structural pattern D1, D2 and D3. D1 and D2 correspond to nappe stacking and dextral transpression, respectively. D3 is related to vertical shortening and coaxial thinning with a preferential NE–SW- to E–W-directed stretching. LA-ICP-MS analyses on the syntectonic Anglès, Soulié and Martys granites yielded U–Th/Pb monazite ages of 305 ± 1.5, 306 ± 1.9 and 314 ± 2 Ma, respectively. Five migmatitic rocks sampled in the eastern and central Espinouse area yielded in situ ages ranging between 312 ± 2 and 301 ± 2 Ma. Along the dome envelope, two garnet–staurolite-bearing micaschists near Saint-Pons-de-Thomières village gave in situ U–Th–Pb ages of 312.1 ± 2.1 and 309.0 ± 3.1 Ma. A fine-grained gneiss with a D3 fabrics in the eastern dome envelope yield a 208Pb/232Th mean age at 305.7 ± 3.9 Ma. All ages obtained in this study for the micaschists, migmatites and granites range between 315 and 301 Ma. We interpret this time span as the record of the high thermal event responsible for intense crustal partial melting within the lower and middle crust. The onset of partial melting occurred at ca. 315 Ma that marked the beginning of transpressional deformation D2. Based on structural and petrological studies, our new U–Th–Pb results suggest that (1) partial melting may have started at ca. 315 Ma and lasted 15–10 Myr and (2) D2 et D3 developed between 315 and 300 Ma and were synchronous. D1 deformation ended at 315 Ma. The onset and duration of D1 related to nappe stacking and crustal thickening is still uncertain.
ISSN: 1437-3254

hal-01526942
https://hal.archives-ouvertes.fr/hal-01526942
DOI : 10.1007/s00531-016-1417-x

Éditeur(s) : HAL CCSD
Résumé : International audience
Although earthquakes and tsunamis are less frequent in the Dover Straitthan over active subduction zones, a plausible potential exists for intraplate earthquakes of magnitude Mw=6.9 generating a tsunami with damaging consequences. In April 1580, an earthquake shook the region violently and destructions were reported as far as London in the north andRouen in the south. Despite fair weather conditions, a series of abnormal sea waves was reported in several harbours (Calais, Boulogne and Dover) on the same day. A first step was to produce a range of numerical coseismic tsunami simulations and to compare them with historical witness accounts. Results raise the question of whether such earthquakes could also triggerchalk flow-generated tsunamis along cliff lines on both sides of the Strait. Gravity-driven collapses affect thechalk cliffs periodically, but local tsunami waves caused by very large mass movements could reach heights of several meters and, for example, strike Dover.
Proceedings of the 15th World Conference on Earthquake Engineering
Lisbonne, Portugal

halshs-01291496
https://halshs.archives-ouvertes.fr/halshs-01291496

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
An analytical solution in the Laplace domain is derived for modeling anomalous pressure diffusion during pumping tests in aquifer displaying hierarchical fractal fracture networks. The proposed solution generalizes all of the analytical models for fractal flow published previously by combining multifractal diffusion and nested multiporosity with transient exchanges, interface skin effects, and well storage effect. Solutions are derived for fracture-delimited blocks with planar, cylindrical, and spherical shapes, as well as with any fractional dimensional shapes. Any combinations of these shapes can be defined in order to model a large range of situations. Within each permeability level, the fractal properties of the fracture network can be specified and the fractal dimension can be distinct from the shape dimension of the block.
ISSN: 0043-1397

hal-00411549
https://hal.archives-ouvertes.fr/hal-00411549
DOI : 10.1029/2008WR007125

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Several recent studies have documented that reactions between melt and crystal mush in primitive gabbroic rocks (via reactive porous flow) have an important control in the formation of the lower oceanic crust and the evolution of MORBs. In this context, olivine-rich rocks can form either by fractional crystallization of primitive melts or by open system reactive percolation of pre-existing (possibly mantle-derived) olivine matrix. To address this question, we performed in-situ trace element analyses (by LA-ICP-MS) of olivine from the Erro-Tobbio ophiolite Unit (Ligurian Alps), where mantle peridotites show gradational contacts with an hectometer-scale body of troctolites and plagioclase wehrlites, and both are cut by later decameter-wide lenses and dykes of olivine gabbros. Previous studies inferred that troctolites and olivine gabbros represent variably differentiated crystallization products from primitive MORB-type melts. Olivines in the three rock types (mantle peridotites, troctolites, olivine gabbros) exhibit distinct geochemical signature and well-defined elemental correlations. As expected, compatible elements (e.g. Ni) show the highest concentrations in peridotites (2580–2730 ppm), intermediate in troctolites (2050–2230 ppm) and lowest in gabbros (1355–1420 ppm), whereas moderate incompatible elements (e.g. Mn, Zn) show the opposite behaviour. By contrast, highly incompatible elements like Zr, Hf, Ti, HREE are variably enriched in olivines of troctolites, and the enrichment in absolute concentrations is coupled to development of significant HFSE/REE fractionation (ZrN/NdN up to 80). AFC modelling shows that such large ZrN/NdN ratios in olivines are consistent with a process of olivine assimilation and plagioclase crystallization at decreasing melt mass, in agreement with textural observations. In-situ trace element geochemistry of olivine, combined with microstructural investigations, thus appears a powerful tool to investigate reactive percolation and the origin of olivine-rich rocks in the lower oceanic crust.
ISSN: 0016-7037

hal-01419938
https://hal.archives-ouvertes.fr/hal-01419938
DOI : 10.1016/j.gca.2016.06.029

Résumé : Nous avons étudié les phénomènes de polyploïdisation chez l'igname Dioscorea alata qui comprend trois cytotypes diploïde (2n=40), triploïde (2n=60) et tétraploïde (2n=80) en vue d'optimiser les stratégies de production d'hybrides polyploïdes. Chez ce complexe polyploïde l'augmentation de la ploïdie est corrélée avec une augmentation de la vigueur et des rendements plus élevés et plus stables. Dans un premier temps nous avons démontré l'autotétraploïdie des variétés tétraploïdes à l'aide de trois approches différentes: des analyses d'hérédité de marqueurs microsatellites, l'observation de phénomènes de double réduction et l'étude des méioses des cellules mères de pollen. Nous avons ensuite déterminé quels sont les mécanismes les plus probables à l'origine des polyploïdes naturels via l'étude de la transmission de l'hétérozygotie parentale à l'aide de microsatellites et par l'étude des incompatibilités au niveau de l'albumen lors de différents croisements intracytotypes et intercytotypes en utilisant la cytométrie en flux. Les résultats obtenus montrent que les polyploïdes de D. alata seraient apparus via la formation de gamètes non réduits de clones diploïdes. Le pool triploïde se serait édifié et diversifié uniquement par voie femelle, du fait de la non viabilité des croisements intercytotypes et de la stérilité des femelles et mâles triploïdes. Le pool tétraploïde serait apparu par union de deux gamètes non réduits de clones diploïdes (polyploidisation sexuelle bilatérale). Par la suite ce pool aurait été diversifié via des croisements intercy
We studied polyploidisation phenomena in the yam Dioscorea alata that includes three cytotypes -diploid (2n=40), triploid (2n=60) and tetraploid (2n=80) -in order to optimise polyploid hybrid production strategies. In this complex polyploid, the increase in ploidy is correlated with an increase in vigour and higher and more stable yields. We first showed the autotetraploidy of tetraploid varieties using three different approaches: heredity analyses of microsatellite markers, the observation of double reduction phenomena, and the study of meiosis of pollen mother cells. We then determined the mechanisms most likely to be at the origin of natural polyploids through the study of the transmission of parental heterozygoty using microsatellites and the study of incompatibilities at the endosperm level at the time of different intracytotypic and intercytotypic crosses using flow cytometry. The results obtained reveal that the polyploids of D. alata probably appeared through the formation of non-reduced gametes of diploid clones. The triploid pool would then have been constituted and diversified through the female pathway as a result of the non-viability of intercytotypic crosses and the sterility of female and male triploids. The tetraploid pool would have appeared as a result of the union of two non-reduced gametes of diploid clones (bilateral sexual polyploidisation). This pool would then have diversified through intercytotypic crosses with the formation of 2n gamètes through both the female and the male pathway, as well as by intracytotypic crosses within the 4X pool.

http://www.theses.fr/2012AGUY0519/document

Éditeur(s) : HAL CCSD
Résumé : International audience
The « METYSS » cruise was carried out in June 2009 onboard the R/V « Téthys II » along the eastern Sardinian and south-eastern Corsican margins, western Tyrrhenian Sea, in order to better constrain the potential links between deformation related to either crustal tectonics or salt tectonics and sediment accumulation, especially during the Messinian and Plio-Quaternary times. We acquired 15 high-resolution seismic reflection profiles (about 1200 km in cumulative length) along the south-eastern Corsican margin, immediately north of the Bonifacio Strait and along the upper and middle parts of the eastern Sardinian margin, from the continental slope to the Cornaglia Terrace. The Tyrrhenian Sea is considered as a Neogene back-arc basin that opened during continental rifting and oceanic spreading related to the eastward migration of the Apennine subduction system from Tortonian to Pliocene times (Jolivet et al., 2006). Rifting of the Tyrrhenian Sea started first along the Eastern Sardinian margin during the Tortonian-Messinian times and therefore the series of that age should be considered as syn-rift sediments (Sartori et al., 2004). The « METYSS » seismic profiles clearly illustrate that this part of the Tyrrhenian was highly segmented during the rifting stage by N-S trending normal faults delineating ridges (e.g., Baronie Ridge) and basins (e.g., Sardinian Basin and Cornaglia Terrace), as previously described for example by Thommeret (1999) and Sartori et al. (2004). The Messinian sedimentary units and especially the « Upper Unit » (UU, Lofi et al., this congress, corresponding to the « Upper Evaporites » in the previous literature) are, without any doubt, of syn-rift age, as they display a fan-shaped stratal geometry. The Mobile Unit (MU, Lofi et al., this congress), i.e. the Messinian halite, is clearly imaged in the study area and its spatial repartition can be outlined. The highly-variable thickness of the confined salt basins could be due to the initial basin geometry (i.e. before the Messinian salinity Crisis) or to the syn-rift character of the deposition. Southeastward of the study area, in the vicinity of the Cornaglia Seamount, salt tectonics appears surprisingly vigorous. More surprisingly, several normal faults seem to have remained active in recent times, if not even at present time. Fault slip has been recorded by bathymetric scarps and associated footwall debris flows interfingered within the Plio-Quaternary sequence, even though the eastern Sardinian margin is usually considered to be passive now. Moreover, some amount of tectonic inversion is visible on some normal faults that show contractional or transpressional components of late slip. In addition, this “post-rift” deformation can be illustrated within the Plio-Quaternary sequence by a regional unconformity. Consequently, numerous mass-transport deposits and channel-levees systems observed in the Plio-Quaternary cover could be partly controlled by tectonic activity. These very preliminary results require further investigations in order to better decipher the role of crustal tectonics and salt tectonics, salt-related structures being very efficient markers to discriminate between the respective contribution of gravity-driven, salt tectonics and deep-seated, crustal tectonics (Gaullier et al., 2010). Finally, we aim to precisely determine the relative vertical movements (tilting, subsidence, magmatism. . . ) and geodynamical history of the different segments of the area since 6 Ma.
Geophysical Research Abstracts
Vienne, Austria

hal-00537828
https://hal-brgm.archives-ouvertes.fr/hal-00537828
https://hal-brgm.archives-ouvertes.fr/hal-00537828/document
https://hal-brgm.archives-ouvertes.fr/hal-00537828/file/EGU2010-15469_ref6821.pdf

Éditeur(s) : HAL CCSD
Résumé : International audience
This paper proposes Chebyshev-dependent inhomogeneous second order differential equation for the m-Boubaker polynomials (or Boubaker-Turki polynomials). This differential equation is also presented as a guide to applied physics studies. A concrete example is given through an attempt to solve the Bloch NMR flow equation inside blood vessels.
Applications and Applied Mathematics: An International Journal

hal-00766227
https://hal.univ-antilles.fr/hal-00766227