Éditeur(s) : HAL CCSD
Résumé : Geological storage of CO2 is one of diverse technologies being explored to reduce atmospheric carbon fromindustrial processes (i.e. fossil fuel combustion). One of the specific features of CO2 injection is the possibility ofgeochemical reactions (dissolution – precipitation) between mobile reactive brine (e.g. formation water enrichedin CO2) and the host rock during the spatial and temporal evolution of CO2. That leads to modifications in thepore structure, which in turn change the flow dynamics of the reservoir (e.g. the permeability k). Then, thesesstructural modifications can largely control the injectivity, so that the pressure field in the reservoir and also theCO2 propagation. Accordingly, it is crucial to explore the changes in the reservoir properties (e.g. structural andhydrodynamic) induced during a CO2 injection and specially the relationships between them (e.g. k or reactivesurface-Sr versus porosity-φ , k versus rock heterogeneity), for developing predictive modelling tools of thetransport and reaction processes occurring during a CO2 injection and reliable risk assessment. In the case ofcarbonate rocks, the application of the predictive models of transport and reaction is still challenging, because oftheir high heterogeneity so that the incertitude in the reaction kinetics of carbonate minerals.From this perspective, we realized brine-enriched in CO2 percolation experiments through carbonate rocksamples in thermodynamic conditions expected during CO2 injection in deep reservoirs (T = 100°C et P =12MPa). The permeability changes k(t) is monitored during the experiments and the porosity variationφ (t) iscalculated from chemical analyses of the sampled outlet fluids, using ICP-EAS. The pore structure modificationsare investigated from high resolution X ray micro tomography images acquired from the synchrotron ofGrenoble (ESRF). Depending to the dissolution regime, controlled by the reservoir rock fabric and the chemicalcomposition of the brine (e.g. PCO2), we observed that a modification of pore structure can either improve(atypical result in dissolution context) or impair the value of the permeability k.
Le stockage géologique du CO2 est l’une des diverses technologies étant explorées afin deréduire les émissions de carbone atmosphérique des processus industriels (i.e. combustion del’énergie fossile). L’une des spécifiques caractéristiques de l’injection du CO2 en profondeurreste la possibilité de réactions géochimiques (dissolution-précipitation) entre la saumureréactive mobile (e.g. eau de formation enrichie en CO2) et la roche encaissante durantl’évolution spatiale et temporelle du CO2, conduisant à des modifications dans la structure despores et par conséquent dans les propriétés d’écoulement du réservoir (e.g. la perméabilité k).Donc, ces changements structuraux peuvent largement contrôler l’injectivité, ainsi que lechamp de pression dans le réservoir et aussi la propagation du CO2. Il demeure ainsi cruciald’explorer les changement dans les propriétés de réservoirs (e.g. structurales ethydrodynamiques) induits durant une injection de CO2 et explicitement les relations existantesentre eux (e.g. k ou surface réactive-Sr versus porosité-φ , k versus hétérogénéité de la roche),afin de développer des outils de modélisation prédictive des processus de transport etréactionnels se produisant durant une injection de CO2 et d’évaluer de façon fiable les risques.Dans le cas des réservoirs carbonatés, l’application des modèles prédictifs de transport réactifdemeure toujours un enjeu, car contrainte par la forte hétérogénéité en leur sein ainsi que parl’incertitude dans la cinétique de réactions des minéraux carbonatés dans ce contexte. Danscette optique, nous avons réalisé des expériences de percolation à travers des échantillons deroches carbonatées dans les conditions thermodynamiques de stockage en profondeur (T =100°C et P =12 MPa). L’évolution de la perméabilité k(t) est suivie au cours desexpériences ; et la variation de la porosité φ (t) est calculée à partir des résultats d’analyseschimiques au ICP-AES des fluides de sortie échantillonnés. L’investigation des modificationsapportées à la structure des pores est réalisée par le biais de la Micro-Tomographie hauterésolution à rayon X, acquise au synchrotron de Grenoble (e.g. ESRF).Dépendant du régime de dissolution, contrôlé par la fabrique de la roche réservoir et lacomposition chimique de la saumuré chargée en CO2 (e.g. PCO2 engagée), on a observéqu’une modification de la structure de la roche peut soit améliorer soit détériorer (résultatatypique en contexte de dissolution) la valeur de la perméabilité k.
https://hal.archives-ouvertes.fr/tel-01142136

tel-01142136
https://hal.archives-ouvertes.fr/tel-01142136
https://hal.archives-ouvertes.fr/tel-01142136/document
https://hal.archives-ouvertes.fr/tel-01142136/file/thesemangane2013.pdf

Éditeur(s) : HAL CCSD
Résumé : International audience
The Kazdağ Massif exposes a metamorphic dome in the Biga Peninsula of northwest Turkey. An extensional origin has been proposed for the dome, limited on both flanks by detachments and/or shear zones. The northern flank is bounded by the extensional Alakeçi Shear Zone (ASZ), whose P-T-t path is still poorly known. We therefore focus on its metamorphic conditions and related temporal history to precise its tectono-metamorphic evolution. The local tectonostratigraphy in structurally ascending order comprises: (i) the high-grade metamorphic core rocks of the Kazdaǧ Massif (gneisses and micaschists intercalated with amphibolites and marbles); (ii) the two kilometer-thick ASZ; (iii) the overlaying unmetamorphosed pre-Cenomanian accretionary Çetmi mélange; and (iv) Neogene sedimentary and volcanic cover rocks. ASZ mylonites were derived from both the core rocks and the mélange lithologies. From the north to the south the mylonitic fabrics in the ASZ depict a top-to-the N-NNE shearing, parallel to the NNE-plunging stretching lineation and NNW-dipping mylonitic foliation. This geometry implies normal sense movement i.e. north-side down-dip extensional displacement along this flank of the Kazdaǧ Massif. The northward transition from ductile to brittle-ductile regime through the ASZ shows that the deformation occurred at decreasing temperatures and degree of metamorphism. The paragenesis in equilibrium within the mylonitic gneisses and schists contains Qtz + Fs + Ms + Bt + Grt ± St ± Sill, with late retrogressive chlorite after biotite and garnet. Four samples of ASZ rocks yielded pressures between 6.9-5.7 kbar and temperatures between 706-587°C. Three samples from the mylonitic rocks supplied in situ isochron 36Ar/40Ar mica ages between 31.2-24.2 Ma, which we interpret to date the cooling of the mylonites following the P-T decrease across the ASZ. The metamorphic and structural results support the extensional character of the ASZ, and sketch transition from sillimanite core gneisses in the deeper structural levels to chlorite schists towards the top of the shear zone. These new data allow to precise the peak P-T conditions and the temporal evolution in the northern flank of the Kazdaǧ Massif, where Late Oligocene extensional exhumation was assisted by NNE-directed ductile-brittle ASZ, which had operated from amphibolite to greenschist facies. At the regional scale, this tectono-metamorphic pattern is similar to those observed on other places of the north Aegean domain.
IOP Conference Series
Austin, TE, United States

hal-00642725
https://hal-brgm.archives-ouvertes.fr/hal-00642725
DOI : 10.1088/1755-1307/2/1/012012

Éditeur(s) : HAL CCSD Wiley-Blackwell
Résumé : International audience
Physical modeling of oblique subduction is performed to study the mechanism of strain partitioning. The model is two-layer and includes the elasto-plastic lithosphere (the overriding and subducting plates) and the low-viscosity liquid asthenosphere. The subduction is driven by a push force from a piston and a pull force when the density contrast Ap between the subducting plate and the asthenosphere is positive. We vary both Ap and the interplate friction (frictional stresses). Slip partitioning is obtained only in the models with high interplate friction and only when the overriding plate contains a weak zone. This zone in the models corresponds either to locally thinned litho-sphere or to cut (fault). The horizontal, trench-normal component of the interplate friction force [Ffh[ can be comparable with the absolute value of the horizontal component of the nonhydrostatic interplate pressure force [Fph [ in the subduction zone. Ffh is always negative (compression), while Fph can be either negative (compressional subduction regime) or positive (extensional regime). High friction, which promotes partitioning, can completely cancel the extensional (suction) force Fph. Back arc tension and strike-slip faulting appear thus as conflicting processes, although they can coexist in the same subduction zone, depending on the relative values of relevant forces. It appears that high friction can exist only in compressional subduction zones where partitioning should develop more easily. This conclusion is supported by the comparison of two oblique subduction zones, having similar geometry: the compressional southern Kurile zone (strong partitioning) and extensional southern Ryukyu zone (no lithospheric-scale partitioning). Other factors controlling the strain partitioning are the length of the oblique subductlon zone, the boundary conditions at the transverse limits of the forearc sliver, and of course, the obliquity of subduction.
ISSN: 2169-9275

hal-01261396
https://hal.archives-ouvertes.fr/hal-01261396
https://hal.archives-ouvertes.fr/hal-01261396/document
https://hal.archives-ouvertes.fr/hal-01261396/file/chemendaJGR2000.pdf
DOI : 10.1029/1999JB900332

Éditeur(s) : HAL CCSD Elsevier
Résumé : We have studied the phase transformation of forsterite to wadsleyite under shear stress at the Earth's transition zone pressure and temperature conditions. Two-step experiments were performed using a multi-anvil press. First, we hot pressed iron-free forsterite at 6 or 11 GPa and 1100 degrees C. Then we deformed a slab of this starting material using a direct simple shear assembly at 16 GPa and 1400 degrees C for 1, 15, 35, 40, or 60 min. Both the starting material and the deformed samples were characterized using optical and scanning electron microscopy including measurements of crystal preferred orientations (CPO) by electron back scattered diffraction (EBSD), transmission electron microscopy (TEM), and Fourier transform infrared spectroscopy (FTIR). The phase transformation occurs very rapidly, in less than 1 min, and metastable forsterite relics are not observed after deformation. The grain size of wadsleyite is slightly smaller than the forsterite starting material. The water contents obtained from FTIR analyses in forsterite and wadsleyite are 65-124 wt ppm H2O and 114-736 wt ppm H2O, respectively, which are well below water solubility at similar conditions in the presence of free water. Wadsleyite aggregates display weak CPO patterns with [1 0 0] axes concentrated at low angle to the shear direction, [0 1 0] axes perpendicular to the shear plane and nearly random [0 0 1] axes. Only a few dislocations were observed in wadsleyite with TEM. This observation is consistent with the assumption that most dislocations formed during the initial high-stress stages of these stress-relaxation experiments, were consumed in the phase transformation, probably enhancing the transformation rate. CPO patterns vary as a function of the water content: with increasing water content the density of [1 0 0] axes parallel to the shear direction decreases, and the density of [0 0 1] axes increases. Viscoplastic self-consistent modeling of CPO evolution using previously reported glide systems for wadsleyite, i.e., [1 0 0]{0 k 1} and 1/2 (1 1 1){1 0 1}, cannot reproduce the measured CPO, unless the [0 0 1](0 1 0) system, for which dislocations have not been observed by TEM, is also activated. In addition, wadsleyite grain growth suggests the participation of diffusion-assisted processes in deformation. Calculated anisotropies for P and S-waves using measured CPO are always below 1%. This very low anisotropy is due to both the low finite strain achieved in the experiments, which leads to weak wadsleyite CPO, and to the diluting effect of added majorite. The present experiments emphasize the importance of stress, grain size evolution and water content in the forsterite to wadsleyite phase transformation and subsequent deformation in the transition zone.
ISSN: 0031-9201

hal-00617430
https://hal.archives-ouvertes.fr/hal-00617430
DOI : 10.1016/j.pepi.2010.11.001

Éditeur(s) : HAL CCSD Springer Verlag
Résumé :  
Genetic variation for intrinsic water use efficiency (W i) and related traits was estimated in a full-sib family of Quercus robur L. over 3 years. The genetic linkage map available for this F1 family was used to locate quantitative trait loci (QTL) for W i, as estimated by leaf carbon stable isotope composition (δ 13C) or the ratio of net CO2 assimilation rate (A) to stomatal conductance to water vapour (g w) and related leaf traits. Gas exchange measurements were used to standardize estimates of A and g w and to model the sensitivity of g w to leaf-to-air vapour pressure deficit (sgVPD). δ 13C varied by more than 3‰ among the siblings, which is equivalent to 40% variation of W i. Most of the studied traits exhibited high clonal mean repeatabilities (>50%; proportion of clonal mean variability in global variance). Repeatabilities for δ 13C, leaf mass per area (LMA) and leaf nitrogen content were higher than 70%. For δ 13C, ten QTLs were detected, one of which was detected repeatedly for all 3 years and consistently explained more than 20% of measured variance. Four genomic regions were found in which co-localizing traits linked variation in W i to variations in leaf chlorophyll and nitrogen content, LMA and sgVPD. A positive correlation using clonal means between δ 13C and A/g w, as well as a co-localisation of QTL detected for both traits, can be seen as validation of the theoretical model linking the genetic architecture of these two traits.
ISSN: 1614-2942

hal-01032066
https://hal.archives-ouvertes.fr/hal-01032066
DOI : 10.1007/s11295-007-0107-z

Éditeur(s) : HAL CCSD Springer Verlag
Résumé :  
A closed depression is defined as a geomorphologic element where a sediment depository is encircled by hillslopes. Despite the fact that closed depressions are often the only stagnant water points in many European landscapes, few ecological researches on their plant assemblages have been done. The main goal of this study was to give first results of the environmental factors responsible for the vegetation composition, richness and rarity in the closed depressions of the Lorraine biogeographical district (Belgium, France and grand-duche de Luxembourg). We surveyed for plant presence 85 forest and 77 grassland closed depressions. For each site, wetland area, local environmental factors and regional connectivities registered. For each species, the Ellenberg values were compiled. To investigate the main source of variation in species composition and in species richness (including richness in rare species), Non-metric Multidimensional Scaling analyses and Generalized Linear Models were respectively used. Species pools in forest (forest and preforest species) and in grassland (bog plants, pioneers, helophytes) were quite different. In both landscapes, a gradient from plants typical of basic high-productive soils to plants typical of acid low-productive soils reflects a shared successional gradient. The accumulation of organic matter allowed the establishment of Sphagnum spp., which slowly acidified the soil and thus acted as ecosystem engineers for the arrival of bog plants. Moreover, the species composition was additionally driven by the plant light tolerance in forests and by the plant water requirements in grasslands. Mechanisms of species accumulation (increase in species richness) were different in forests and in grasslands: respectively related to the plant light tolerance and to the wetland area. At the regional level, the averaged soil productivity was negatively related to the richness in rare species. Indeed, perennial highly-competitive plants such as Glyceria spp., Iris pseudacorus or Urtica dioica impeded the establishment of smaller and rarer species. At the habitat level, isolated closed depressions (due to either low connectivity or low grazing pressure) have more habitat rare species, giving evidences of dispersal limitation in plant assemblages of closed depressions.
ISSN: 0960-3115

hal-01032125
https://hal.archives-ouvertes.fr/hal-01032125
DOI : 10.1007/s10531-007-9227-x

Éditeur(s) : HAL CCSD American Geophysical Union (AGU)
Résumé : International audience
In south China the Lushan massif forms a topographic high of the South China Block south of the Qinling-Dabie belt. The Lushan massif consists of two main lithotectonic units separated by a major tectonic contact: a Neoproterozoic (upper Sinian)-Paleozoic unit comprising primarily unmetamorphosed sandstones overlies a Paleoproterozoic unit mainly composed of low-pressure, high-temperature gneisses and micaschists. Both units are cut by Cretaceous granitic intrusions. Three primary tectono-metamorphic and magmatic events are recognized. The eastern part of the Lushan massif is cut by a NNE-SSW trending ductile normal fault (D3 deformation) coeval to the emplacement of a 100-110 Ma leucogranite dated by 40Ar/39Ar laserprobe on biotite and muscovite. D2 deformation is responsible for the formation of a decakilometer-scale NE-SW trending upright anticline characterized by NE-SW stretching and NW-SE shortening. The age of this folding event is defined by a 127±1 (2σ) Ma U/Pb titanite date obtained for a syntectonic granodiorite and 40Ar/39Ar ages of 133 Ma for amphibole. This Cretaceous age also corresponds to the 40Ar/39Ar ages of 126 Ma found on syntectonic muscovites at the base of the Sinian unit. An older deformation event, D1, characterized by a top-to-the-NW extensional decollement of the Sinian-Paleozoic series above Proterozoic metamorphic rocks is related to the Triassic tectonics of the Dabieshan. Lastly, in the lower part of Sinian rocks, the occurrence of kyanite cataclased during D1 documents an older, poorly preserved, late Paleozoic-early Mesozoic tectonometamorphic event (Dx) related to a blind thrust in the continental crust of the South China Block in the southern foreland of the Dabieshan.
ISSN: 0278-7407

insu-00717721
https://hal-insu.archives-ouvertes.fr/insu-00717721
https://hal-insu.archives-ouvertes.fr/insu-00717721/document
https://hal-insu.archives-ouvertes.fr/insu-00717721/file/Lin-Tectonics-2000.pdf
DOI : 10.1029/2000TC900009

Éditeur(s) : HAL CCSD
Résumé : International audience
Aegean extension is a process driven by slab rollback that since 45 Ma shows a two-stage evolution. From 45 to13 Ma it is accommodated by localized deformation leading to i) the exhumation of high-pressure metamorphicrocks from mantle to crustal depths, ii) the exhumation of high-temperature rocks in core complexes and iii) thedeposition of Paleogene sedimentary basins. Since 13 Ma, extension is distributed over the whole Aegean domaingiving a widespread development of onshore and offshore Neogene sedimentary basins. The 3D reconstruction atAegean scale of this two-stage evolution shows that the rate of trench retreat was around 0.6 cm/y during the first30 My and then accelerated up to 3.2 cm/y during the last 13 My. Using available tomographic evidence, timingof metamorphic and sedimentary processes, paleomagnetic data and geometry and kinematics of deformation, wepropose that the sharp transition in trench retreat and deformation mode, localized vs distributed, at 13 Ma wascontrolled to slab tearing. Moreover, the development of dextral NE-SW strike-slip faults and related pull-apartbasins in the North Aegean domain, from the Cyclades to the Rhodope, strongly suggests that this sharp transitionalso corresponds to the onset of Anatolia westward escape.
Geophysical Research Abstracts
Vienne, Austria

insu-01137631
https://hal-insu.archives-ouvertes.fr/insu-01137631

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The basement of central Madagascar displays two contrasted structural patterns. The first one (D1) is characterized by north-striking foliations that are gently dipping to the west and carry W- to WSW-plunging lineations, whereas the second one (D2) is characterized by steeper foliations that are striking to the NNE and lineations that are either subhorizontal or gently plunging to the SSW. The younger pattern is related to late-Panafrican tectonics along the major Angavo shear zone that is about 1000 km in length and 40 km in width with apparently little offset. Deformation in the Angavo zone induced interference folding on both sides. The D2 event is characterized by low pressures (ca 400 MPa) and high temperatures (up to 790 degrees C) responsible for prograde granulite facies conditions, that resulted from heat transfer due to magma and fluid advection in the Angavo shear zone. The D2 event is pinned at 550 +/- 11 Ma by a new monazite age from a reoriented Andringitrean granite near Ankaramena. A new suite of amphibole and biotite Ar-Ar geochronological data enables to retrace the thermochronogical evolution inside and outside the Angavo shear zone. Combined with new structural results from the western interference zone. these ages yield a better understanding of the late-Panafrican history of central Madagascar. No diachronism is observed along the strike of the Angavo shear zone. Conversely, amphibole and especially biotite ages decrease from West to East, i.e. towards the shear zone. These new ages range from 511 to 469 Ma. A 1-D conductive model constrains the thermal effect in relation with the Angavo shear zone to be restricted to a lateral distance of ca 60 km (in map view) for a maximum heating duration of 20 Myr. This is in agreement with the Ar-Ar data and with the width of the observed interference zone. Following this episode of deformation and heat transfer, the estimated cooling rates of the Angavo shear zone range from to 15 to 6 degrees C/Myr, respectively before and after 515 Ma. A post-collision intracontinental setting is suggested for the Angavo shear zone, which is regarded as a remote effect of the Kuunga Orogeny between India and Antarctica.
ISSN: 0040-1951

hal-00463507
https://hal.archives-ouvertes.fr/hal-00463507
DOI : 10.1016/j.tecto.2009.03.009

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Recent geochemical work shows that subduction-zone serpentinites are repositories for fluid-mobile elements absorbed during interaction with sediment-derived fluids. Unraveling the geochemical fingerprint of these rocks helps to define timing of tectonic accretion of sediments along the subduction interface and the role of serpentinite in element recycling to volcanic arcs. Here we present the trace element and isotopic composition (B–O–H, Sr, Pb) of high-pressure serpentinites from the Voltri Massif (Ligurian Western Alps, Italy), to discuss their role as incompatible element carriers and their contribution to recycling of sediment-derived components in subduction zones.The serpentinites presented here record metamorphic olivine growth during eclogite-facies metamorphism and show undeformed and mylonitic textures. Field relations show that undeformed rocks are enclosed in deformed ones and that no metasedimentary rocks are present nearby. Undeformed serpentinite has very high δ11BSRM951 (from +26‰ to +30‰), low Sr and Pb isotope ratios (87Sr/86Sr = 0.7053–0.7069; 206Pb/204Pb = 18.131–18.205) and low As and Sb contents (0.1 and 0.01 μg/g, respectively). Oxygen and hydrogen isotope compositions are +4.5‰ and −67‰, respectively. In contrast, mylonitic serpentinite shows lower δ11B (from +22‰ to +17‰), significant enrichment in radiogenic Sr and Pb isotopes (87Sr/86Sr up to 0.7105; 206Pb/204Pb up to 18.725), and enrichment in As and Sb (1.3 and 0.39 μg/g, respectively). δ18O of the mylonitic serpentinites reaches values of +5.9‰, whereas δD is comparable with that of undeformed rocks (approximately −70‰). In mylonitic serpentinites, the B and Sr isotopic values and the fluid-mobile element (FME) concentrations are near those for the Voltri metasedimentary rocks (calc- and mica-schists). Pb systematics also reveal influx of a crust-derived component.Our dataset shows that undeformed serpentinite still preserves an oceanic geochemical fingerprint, whereas mylonitic serpentinite is reset in its concentrations of FME and its B, Sr and Pb isotope compositions, due to interaction with sediment- and crust-derived fluids. The environment of this interaction is either compatible with (i) an outer-rise zone setting, with percolation of seawater-derived fluids enriched in sedimentary components into bending-related fault structures, or with (ii) subduction channel domains, where ascending sediment-derived slab fluids infiltrate slices of former oceanic serpentinite accreted to the plate interface domain. Influx of sediment-derived subduction fluids along major deformation zones in serpentinite modifies the element budget of the rocks, with important implications for element recycling and the tectonic history of serpentinite. The B, Sr and Pb isotopic systematics, coupled with FME concentration in serpentinites are particularly helpful geochemical tracers of interaction between different reservoirs in subduction-interface environments, and are more sensitive than the traditionally applied stable oxygen and hydrogen isotope compositions.
ISSN: 0016-7037

hal-01419940
https://hal.archives-ouvertes.fr/hal-01419940
DOI : 10.1016/j.gca.2016.06.034

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The Dahomey belt in Togo and Benin is an important segment of the larger West Gondwana Orogen. Here, we review the geodynamic evolution of the Dahomey belt and discuss new U–Pb and Lu–Hf zircon data in light of similar data previously acquired on the geologically related Northern Borborema Province, in NE Brazil. Eighteen samples from different tectonic settings and regions within the belt were collected for zircon isotopic investigation. Passive margin deposits of the Atacora Structural Unit and lower units of the Volta Basin have detrital zircon signatures compatible with the flanking West Africa Craton. The arc-related magmatism resulted from the east-dipping subduction of the Goiás-Pharusian oceanic lithosphere and is represented by a variety of granitoids emplaced in the Benino-Nigerian Shield between 670 and 610 Ma. These granitoids were mainly sourced from crustal reservoirs with subordinate juvenile input. Detrital zircon ages from syn-orogenic deposits in Benino-Nigerian Shield suggest that arc development could have started as early as 780 Ma. The main period of melting in the internal part of the belt, the Benino-Nigerian Shield, is related to crustal thickening and occurs only ca. 30 m.y. after initiation of the continental collision, marked by the ca. 610 Ma ultra-high pressure (UHP) metamorphism recorded at Lato Hills. Foreland development represented by the upper units of the Volta basin developed soon after continental collision and persisted with the development of the west-verging thrust front synchronously with the main period of crustal melting due to collision at ca. 580 Ma. The subvertical Transbrasiliano Lineament in South America, that corresponds to the Kandi Lineament in Africa, provides a present-day fit between NW Africa and NE Brazil. Restoration of the movement of the Transbrasiliano-Kandi Lineament (strike-slip plate boundary) places the Dahomey belt and Borborema Province (NE Brazil) along the same section of the West Gondwana Orogen. This configuration would explain some of the misfits previously discussed in the literature and aligns the UHP eclogites in Togo and NE Brazil.
ISSN: 0301-9268

hal-01358584
https://hal.archives-ouvertes.fr/hal-01358584
DOI : 10.1016/j.precamres.2016.01.032

Éditeur(s) : HAL CCSD Universidad de Barcelona
Résumé : Tens of Surtseyan tuff cones are exposed in the Rio Coichel valley, between Nireguao and Estancia Bano Nuevo (Southern Chilean Andes). The Early Cretaceous products of the submarine eruptions rest on, or are interbedded with, shallow marine sandstones of the Hauterivian-early Aptian Apeleg Formation. The Early Cretaceous rocks typically contain large amphibole phenocrysts, clinopyroxene and plagioclase, and have compositions that range from relatively primitive basalts to andesites. The basalts are slightly enriched in LREE and incompatible trace elements. They have low Ti-contents and negative anomalies in Nb and Ta, characteristic of subduction-related magmas. Centimetre-sized amphibole megacrysts and an amphibole-bearing clinopyroxenite xenolith have been found in one of the tuff cones located near Estancia Bano Nuevo. The amphibole megacrysts are pargasite (low Si and Ti, high Mg). The xenolith has diopsidic clinopyroxene with abundant inclusions, and pargasite veins enclosing smaller clinopyroxene neoblasts. Geochemical data show that the megacrysts and the xenolith have the same origin and correspond to underplated igneous bodies crystallized at high pressure.
ISSN: 1695-6133

hal-00512829
https://hal.archives-ouvertes.fr/hal-00512829
DOI : 10.1344/105.000001530

Éditeur(s) : HAL CCSD American Geophysical Union (AGU)
Résumé : International audience
Sandbox experiments, using a two-dimensional and a three-dimensional approach, are used to study the deformation of margins in response to seamount subduction. Successive mechanisms of deformation are activated during the subduction of conical seamounts. First, reactivation of the frontal thrusts and compaction of the accretionary wedge is observed. Then, back thrusting and, conjugate strike-slip faulting develops above the leading slope of the subducted seamount. The basal d6collement is deflected upward in the wake of the subducting high, and a large shadow zone develops behind the seamount trailing slope. Consequently, frontal accretion is inhibited and part of the frontal margin is dragged into the subduction zone. When the main d6collement returns to its basal level in the wake of the seamount, the margin records a rapid subsidence and a new accretionary wedge develops, closing the margin reentrant. The sediments underthrusted in the wake of the seamount into the shadow zone, are underplated beneath the rear part of the accretionary wedge. Substantial shortening and thickening of the deformable seaward termination of the upper plate basement, associated with basal erosion is observed. Seamount subduction induces significant material transfer within the accretionary wedge, favors large tectonic erosion of the frontal margin and thickening of the rear part of the margin. The subduction and underplating of relatively undeformed, water-ladden sediments, associated with fluid expulsion along the fractures affecting the margin could modify the fluid pressure along the basal ddcollement. Consequently, significant variations of the effective basal friction and local mechanical coupling between the two plates could be expected around the subducting seamount.
ISSN: 0278-7407

hal-01261523
https://hal.archives-ouvertes.fr/hal-01261523
https://hal.archives-ouvertes.fr/hal-01261523/document
https://hal.archives-ouvertes.fr/hal-01261523/file/Dominguez2000-Tectonics.pdf
DOI : 10.1029/1999TC900055

Éditeur(s) : HAL CCSD
Résumé : International audience
At the Land-Sea interface, the mangrove forests represent unique but very threatened ecosystems. In the tropical island systems as to the biosphere scale, the mangrove forests and related biocenoses are relevant anthropization markers. The pressures and the direct and indirect damage are also multiple and varied. Generally, the coastal ecosystems of the French West Indies are in constant evolution. The effect of natural factors is increased by human activities. In these small, densely populated and urbanized areas, the mangrove forests are part of the last unoccupied areas. Faced with growing development needs, they represent an area to use, exploit and impact. The human footprint is high and sometimes it has irreversible consequences. The human impact mainly translates into the erosion of biodiversity and ecosystem services. Facing these imbalances, the study of the mangrove ecosystem using conservation ecology stands as an essential approach for the preservation of Martinique’s coastal ecosystems.
ISSN: 2277-8322

hal-01393660
https://hal.univ-antilles.fr/hal-01393660

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Intraplate deformation is most often linked to major stress applied on plate margins. When such intraplate events are accompanied by magmatism, the use of several dating methods integrated within a multidisciplinary approach can bring constraints on the age, nature and source mobilized for generating the magma and in turn on the nature of the intraplate deformation. This study focuses on the large gabbro Arrikine sill (35 km in extension) emplaced within the Silurian sediments of the western margin of the Murzuq cratonic basin in southeastern Algeria. Its emplacement is dated during the early Devonian (415-400 Ma) through the determination of a reliable paleomagnetic pole by comparison with the Gondwana Apparent Polar Wander Path (APWP). This age can be correlated with deep phreatic eruptions before Pragian time thought to be at the origin of sand injections and associated circular structures in Algeria and Libya. For the sill, the K–Ar age of 325.6 ± 7.7 Ma is related to a K-rich aplitic phase that has K-enriched by more than 20% the Devonian gabbro. Laser-ICP-MS U–Pb method dates only inherited zircons mostly at c. 2030 Ma with additional ages at c. 2700 Ma and younger ones in the 766-598 Ma age range. The Arrikine sill is a high-Ti alkaline gabbro having the geochemical composition of a hawaiite akin to several intraplate continental and oceanic provinces, including the contemporaneous Aïr ring complexes province in Niger, but also to the Mauna Loa volcano in Hawaii. This peculiar composition akin to that of the contemporaneous Aïr province is in agreement with a lower Devonian age for the Arrikine sill.The lower Devonian Arrikine sill emplacement is related to a “Caledonian” transtensive reactivation of the western metacratonic boundary of the Murzuq craton. This event also generated in the Saharan platform the so-called “Caledonian unconformity” of regional extension, the Aïr ring complexes and magmatic rocks that produced sand injections. It could be related to rifting of the Hun terranes that occurred at the plate margin to the north (Stampfli and Borel, 2002, Blackey, 2008 and references therein). The mid-Carboniferous (c. 326 Ma) reactivation corresponds to Variscan compression on NW Africa generating aplitic fluids, but also to the major “Hercynian unconformity” of regional extension. The generation of the Arrikine magma is attributed to partial melting through adiabatic pressure release of uprising asthenosphere along tectonically reactivated mega-shear zones, here bordering the relictual Murzuq craton enclosed in the Saharan metacraton.
ISSN: 0899-5362

hal-01306637
https://hal.archives-ouvertes.fr/hal-01306637
DOI : 10.1016/j.jafrearsci.2015.11.019

Éditeur(s) : HAL CCSD Springer Verlag
Résumé : International audience
Unravelling the detailed pressure–temperature–time-deformation (P–T–t-D) evolution of magmatic and metamorphic rocks provides essential insights into the timing and duration of partial melting and related plutonism during crustal flow and migmatitic dome formation. The Montagne Noire Axial Zone (MNAZ) is a migmatitic dome located within the Variscan orogen in the southern French Massif Central. The timing of the main thermal event that was responsible for intense partial melting is still highly debated. In this study we present new laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS) age data on micaschists, migmatites and granites that clarify the P–T–t-D evolution of the MNAZ. Structurally controlled samples were collected in order to constrain the timing of metamorphism, migmatization and plutonism regarding the main structural pattern D1, D2 and D3. D1 and D2 correspond to nappe stacking and dextral transpression, respectively. D3 is related to vertical shortening and coaxial thinning with a preferential NE–SW- to E–W-directed stretching. LA-ICP-MS analyses on the syntectonic Anglès, Soulié and Martys granites yielded U–Th/Pb monazite ages of 305 ± 1.5, 306 ± 1.9 and 314 ± 2 Ma, respectively. Five migmatitic rocks sampled in the eastern and central Espinouse area yielded in situ ages ranging between 312 ± 2 and 301 ± 2 Ma. Along the dome envelope, two garnet–staurolite-bearing micaschists near Saint-Pons-de-Thomières village gave in situ U–Th–Pb ages of 312.1 ± 2.1 and 309.0 ± 3.1 Ma. A fine-grained gneiss with a D3 fabrics in the eastern dome envelope yield a 208Pb/232Th mean age at 305.7 ± 3.9 Ma. All ages obtained in this study for the micaschists, migmatites and granites range between 315 and 301 Ma. We interpret this time span as the record of the high thermal event responsible for intense crustal partial melting within the lower and middle crust. The onset of partial melting occurred at ca. 315 Ma that marked the beginning of transpressional deformation D2. Based on structural and petrological studies, our new U–Th–Pb results suggest that (1) partial melting may have started at ca. 315 Ma and lasted 15–10 Myr and (2) D2 et D3 developed between 315 and 300 Ma and were synchronous. D1 deformation ended at 315 Ma. The onset and duration of D1 related to nappe stacking and crustal thickening is still uncertain.
ISSN: 1437-3254

hal-01526942
https://hal.archives-ouvertes.fr/hal-01526942
DOI : 10.1007/s00531-016-1417-x

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Slices of polycyclic metasediments (marbles and meta-cherts) are tectonically amalgamated with the polydeformed basement of the Dent Blanche tectonic system along a major Alpine shear zone in the Western Alps (Becca di Salé area, Valtournenche Valley). A combination of techniques (structural analysis at various scales, metamorphic petrology, geochronology and trace element geochemistry) was applied to determine the age and composition of accessory phases (titanite, allanite and zircon) and their relation to major minerals. The results are used to reconstruct the polyphase structural and metamorphic histories, comprising both pre-Alpine and Alpine cycles. The pre-Alpine evolution is associated with low-pressure high-temperature metamorphism related to Permo-Triassic lithospheric thinning. In meta-cherts, microtextural relations indicate coeval growth of allanite and garnet during this stage, at ~ 300 Ma. Textures of zircon also indicate crystallisation at HT conditions; ages scatter from 263 to 294 Ma, with a major cluster of data at ~ 276 Ma. In impure marble, U-Pb analyses of titanite domains (with variable Al and F contents) yield apparent 206Pb/238U dates range from Permian to Jurassic. Chemical and isotopic data suggest that titanite formed at Permian times and was then affected by (extension-related?) fluid circulation during the Triassic and Jurassic, which redistributed major elements (Al and F) and partially opened the U-Pb system. The Alpine cycle lead to early blueschist facies assemblages, which were partly overprinted under greenschist facies conditions. The strong Alpine compressional overprint disrupted the pre-Alpine structural imprint and/or reactivated earlier structures. The pre-Alpine metamorphic record, preserved in these slices of metasediments, reflects the onset of the Permo-Triassic lithospheric extension to Jurassic rifting.
ISSN: 0024-4937

hal-00758123
https://hal.archives-ouvertes.fr/hal-00758123
DOI : 10.1016/j.lithos.2012.05.007

Éditeur(s) : HAL CCSD American Geophysical Union (AGU)
Résumé : International audience
The Pyrenean peridotites (lherzolites) form numerous small bodies of subcontinental mantle, a few meters to 3 km across, exposed within the narrow north Pyrenean zone (NPZ) of Mesozoic sediments paralleling the north Pyrenean Fault. Recent studies have shown that mantle exhumation occurred along the future NPZ during the formation of the Albian-Cenomanian Pyrenean basins in relation with detachment tectonics. This paper reviews the geological setting of the Pyrenean lherzolite bodies and reports new detailed field data from key outcrops in the Bearn region. Only two types of geological settings have to be distinguished among the Pyrenean ultramafic bodies. In the first type (sedimented type or S type), the lherzolites occur as clasts of various sizes, ranging from millimetric grains to hectometric olistoliths, within monogenic or polymictic debris flow deposits of Cretaceous age, reworking Mesozoic sediments in dominant proportions as observed around the Lherz body. In the second type (tectonic type or T type), the mantle rocks form hectometric to kilometric slices associated with crustal tectonic lenses. Both crustal and mantle tectonic lenses are in turn systematically associated with large volumes of strongly deformed Triassic rocks and have fault contacts with units of deformed Jurassic and Lower Cretaceous sediments belonging to the cover of the NPZ. These deformed Mesozoic formations are not older that the Aptian-early Albian. They are unconformably overlain by the Albian-Cenomanian flysch formations and have experienced high temperature-low pressure mid-Cretaceous metamorphism at variable grades. Such a tectonic setting characterizes most of the lherzolite bodies exposed in the western Pyrenees. These geological data first provide evidence of detachment tectonics leading to manle exhumation and second emphasize the role of gravity sliding of the Mesozoic cover in the preorogenic evolution of the Pyrenean realm. In the light of such evidence, a simple model of basin development can be inferred, involving extreme thinning of the crust, and mantle uprising along a major detachment fault. We demonstrate coeval development of a crust-mantle detachment fault and generalized gravitational sliding of the Mesozoic cover along low-angle faults involving Triassic salt deposits as a tectonic sole. This model accounts for the basic characteristics of the precollisional rift evolution in the Pyrenean realm.
ISSN: 0278-7407

hal-00512818
https://hal.archives-ouvertes.fr/hal-00512818
DOI : 10.1029/2009TC002588

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
In fold-and-thrust belts, shortening is mainly accommodated by thrust faults which are preferential zones for recrystallisation and mass transfer. This study focuses on a detachment fault related to the emplacement of the Monte Perdido thrust unit in the southern Pyrenees. The studied fault zone consists of a 10 m thick intensively foliated phyllonite developed within the Millaris marls, of Eocene age. The lithological homogeneity of the hanging wall and footwall allows us to compare the Millaris marls outside the fault zone with the highly deformed marls located in the fault zone and to quantify the chemical, mineralogical and volumetric changes related to deformation processes along the fault. The Millaris marls are composed of detrital quartz, illite, chlorite, minor albite and pyrite, in a micritic calcite matrix. In the fault zone, the cleavage planes are marked by clay minerals and calcite ± chlorite veins attest to fluid-mineral interactions during deformation. The mineral proportions in all samples from both the fault zone and Millaris marls have been quantified by two methods: (1) X-ray diffraction and Rietveld refinement, and (2) bulk chemical analyses as well as microprobe analyses to calculate modal composition. The excellent agreement between the results of these two methods allows us to estimate mineralogical variations using a modification of the Gresens' equation. During fault activation, up to 45 wt% of calcite was lost while the amounts of quartz and chlorite remained unchanged. Illite content remained constant to slightly enriched. The mineralogical variations were coupled with a significant volume loss (up to 45%) mostly due to the dissolution of micritic calcite grains. Deformation was accompanied by pressure solution and phyllosilicates recrystallisation. These processes accommodated slip along the fault. They required fluids as catalyst, but they did not necessitate major chemical transfers.
ISSN: 0264-8172

hal-00976361
https://hal.archives-ouvertes.fr/hal-00976361
DOI : 10.1016/j.marpetgeo.2013.12.016

Éditeur(s) : HAL CCSD
Résumé :  
A closed depression is defined as a geomorphologic element where a sediment depository is encircled by hillslopes. Despite the fact that closed depressions are often the only stagnant water points in many European landscapes, few ecological researches on their plant assemblages have been done. The main goal of this study was to give first results of the environmental factors responsible for the vegetation composition, richness and rarity in the closed depressions of the Lorraine biogeographical district (Belgium, France and grand-duche de Luxembourg). We surveyed for plant presence 85 forest and 77 grassland closed depressions. For each site, wetland area, local environmental factors and regional connectivities registered. For each species, the Ellenberg values were compiled. To investigate the main source of variation in species composition and in species richness (including richness in rare species), Non-metric Multidimensional Scaling analyses and Generalized Linear Models were respectively used. Species pools in forest (forest and preforest species) and in grassland (bog plants, pioneers, helophytes) were quite different. In both landscapes, a gradient from plants typical of basic high-productive soils to plants typical of acid low-productive soils reflects a shared successional gradient. The accumulation of organic matter allowed the establishment of Sphagnum spp., which slowly acidified the soil and thus acted as ecosystem engineers for the arrival of bog plants. Moreover, the species composition was additionally driven by the plant light tolerance in forests and by the plant water requirements in grasslands. Mechanisms of species accumulation (increase in species richness) were different in forests and in grasslands: respectively related to the plant light tolerance and to the wetland area. At the regional level, the averaged soil productivity was negatively related to the richness in rare species. Indeed, perennial highly-competitive plants such as Glyceria spp., Iris pseudacorus or Urtica dioica impeded the establishment of smaller and rarer species. At the habitat level, isolated closed depressions (due to either low connectivity or low grazing pressure) have more habitat rare species, giving evidences of dispersal limitation in plant assemblages of closed depressions.
7th INTECOL International Wetland Conference
Utrecht, Netherlands

hal-01032381
https://hal.archives-ouvertes.fr/hal-01032381