Éditeur(s) : HAL CCSD AGU and the Geochemical Society
Résumé : International audience
Rainbow is a dome-shaped massif at the 36°14′N nontransform offset along the Mid-Atlantic Ridge. It hosts three ultramafic-hosted hydrothermal sites: Rainbow is active and high temperature; Clamstone and Ghost City are fossil and low temperature. The MoMARDREAM cruises (2007, 2008) presented here provided extensive rock sampling throughout the massif that constrains the geological setting of hydrothermal activity. The lithology is heterogeneous with abundant serpentinites surrounding gabbros, troctolites, chromitites, plagiogranites, and basalts. We propose that a W dipping detachment fault, now inactive, uplifted the massif and exhumed these deep-seated rocks. Present-day deformation is accommodated by SSW-NNE faults and fissures, consistent with oblique teleseismic focal mechanisms and stress rotation across the discontinuity. Faults localize fluid flow and control the location of fossil and active hydrothermal fields that appear to be ephemeral and lacking in spatiotemporal progression. Markers of high-temperature hydrothermal activity (∼350°C) are restricted to some samples from the active field while a more diffuse, lower temperature hydrothermal activity (<220°C) is inferred at various locations through anomalously high As, Sb, and Pb contents, attributed to element incorporation in serpentines or microscale-sulfide precipitation. Petrographic and geochemical analyses show that the dominant basement alteration is pervasive peridotite serpentinization at ∼160–260°C, attributed to fluids chemically similar to those venting at Rainbow, and controlled by concomitant alteration of mafic-ultramafic units at depth. Rainbow provides a model for fluid circulation, possibly applicable to hydrothermalism at oceanic detachments elsewhere, where both low-temperature serpentinization and magmatic-driven high-temperature outflow develop contemporaneously, channeled by faults in the footwall and not along the detachment fault.
ISSN: 1525-2027

hal-01115281
https://hal.archives-ouvertes.fr/hal-01115281
https://hal.archives-ouvertes.fr/hal-01115281/document
https://hal.archives-ouvertes.fr/hal-01115281/file/Andreani_et_al-2014-Geochemistry%2C_Geophysics%2C_Geosystems.pdf
DOI : 10.1002/2014GC005269

Éditeur(s) : HAL CCSD
Résumé : International audience
The Corinth Rift is the most seismically active zone in Europe. Since the year 2000, the Corinth Rift Laboratory (CRL, http://crlab.eu) consisting in a multidisciplinary natural observatory, aims at understanding the mechanics of faulting and earthquake nucleation in the Rift. Recent studies have improved our view about fault geometry and mechanics within CRL but there is still a critical need for a better knowledge of the structure at depth.In this project, we aim to analyze the complete seismological database (13 years of recordings) of CRL by using recently developed methodologies of structural imaging in order to determine, with high resolution, the local 3D structure and the earthquake locations. We perform an iterative joint determination of 3D velocity model and earthquake coordinates. P and S velocity models are estimated through a first arrival traveltime tomography by using the adjoint state method proposed by Taillandier et al. (2009). It consists in the minimization of the cost function between observed and theoretical arrival times,which is achieved by estimating the gradient of the cost function. Earthquake locations are also estimated with a linearized inversion approach by computing the gradient of the misfit function. Iterations are repeated until the cost function no longer decreases. We present preliminary results consisting in: (1) the adjustment of a 1D velocity model that is used as initial model of the 3D tomography and (2) a first attempt of the joint determination of 3D velocity model and earthquake locations.We also perform a preliminary receiver function analysis of teleseismic data recorded by the broadband stations of the CRL network. The multiscale approach (Gesret et. al., 2010) analysis of teleseismic P to S converted waves allows to analyze the signal toward the higher frequencies and thus to characterize the structure at depth with a high resolution. Our multiscale approach should give us reliable depth of interfaces beneath seismometers in the CRL area. In this first attempt, we adjust the 1D velocity model that produces a synthetic RF as similar as possible to the stack of observed RF for a subset of data. The identified interfaces could then be compared with heterogeneities imaged by the tomography.
AGU Fall Meeting
San Fransico, United States

hal-01417184
https://hal-mines-paristech.archives-ouvertes.fr/hal-01417184

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Absolute earthquake hypocenter locations have been determined in the area offshore eastern Taiwan, at the Southernmost Ryukyu subduction zone. Location process is run within a 3D velocity model by combining the Taiwanese and neighboring Japanese networks and using the 3D MAXI technique. The study focuses on the most active seismic cluster in the Taiwan region that occurs in the forearc domain offshore eastern Taiwan. Earthquakes distribute mainly along 2 active planes. The first one aligns along the subduction interface and the second one, shallower affects the overriding margin. Focal mechanisms within the shallow group indicate that nodal planes are either compatible with high-angle back-thrusts or low-angle thrusts. The active seismic deformation exclusively indicates reverse faulting revealing that the forearc basement undergoes trench-perpendicular strong compression. By integrating the seismological image into the regional context, we favor the hypothesis in which the dense seismicity occurring offshore marks the activity of en-échelon high-angle reverse faults accommodating the uplift of a broken piece of Ryukyu Arc basement, called Hoping Basement Rise. The uplift is inferred to be caused by the subduction of an oceanic relief, either exotic block, seamount or oceanic crust sliver. Our favored solution satisfies the narrowness of epicenter's cluster along the Hoping Canyon, and the observation of high-angle active faults on seismic lines crossing the area. Furthermore, this solution is compatible with the active uplift of the Hoping Rise demonstrated from morphological and sedimentological data. We do not exclude the branching of the high-angle reverse faults system onto a splay fault connected with the subduction interface but further investigations are needed to map precisely the 3D distribution of active faults that break the margin.
ISSN: 0040-1951

hal-00407726
https://hal.archives-ouvertes.fr/hal-00407726
DOI : 10.1016/j.tecto.2007.11.018

Éditeur(s) : HAL CCSD
Résumé : International audience
Astrocytes send out long processes that are terminated by endfeet at the vascular surface and regulate vascular functions as well as homeostasis at the vascular interface. To date, the astroglial mechanisms underlying these functions have been poorly addressed. Here we demonstrate that a subset of messenger RNAs is distributed in astrocyte endfeet. We identified, among this transcriptome, a pool of messenger RNAs bound to ribosomes, the endfeetome, that primarily encodes for secreted and membrane proteins. We detected nascent protein synthesis in astrocyte endfeet. Finally, we determined the presence of smooth and rough endoplasmic reticulum and the Golgi apparatus in astrocyte perivascular processes and endfeet, suggesting for local maturation of membrane and secreted proteins. These results demonstrate for the first time that protein synthesis occurs in astrocyte perivascular distal processes that may sustain their structural and functional polarization at the vascular interface.
Cell Discovery

hal-01545319
https://hal.archives-ouvertes.fr/hal-01545319
DOI : 10.1038/celldisc.2017.5

Éditeur(s) : HAL CCSD
Résumé : International audience
This paper demonstrates that a human being using an interface can be efficiently evaluated - in real time - by embedding basic measurements in the interface and using a suitable trained artificial neural network. The approach is introduced through video games but is suitable for any machine capable of valuable measurements on user actions. Of course, the quality of the "diagnostic" depends of the learnability of the task and of the size and quality of the learning base. Typical applications include the detection of fatigue, stress, emotions, the influence of a drug or of medical treatments ; screening a deficit or adequateness to a task, etc. Two successful prototypes are presented, one to predict the mental age of children through a set of simple basic games, and the other to detect if a subject is right-handed of left-handed through a racing car simulation.
Proceeding of the Third International Conferences on Advances in Computer-Human Interactions
St. Maarten, Netherlands Antilles

hal-00601476
https://hal.archives-ouvertes.fr/hal-00601476

Éditeur(s) : Université des Antilles Études caribéennes
Résumé : Introduction Loin d’apparaître comme de simples interfaces, les littoraux de la Caraïbe sont constitués d’enclaves fonctionnelles qui se juxtaposent donnant une mosaïque créole polyéthnique (mosaïque raciale), aux fractures sociales et spatiales marquées (mosaïque sociale et spatiale). Dans ces îles paysannes qui traditionnellement tournent le dos à la mer, la plage a longtemps été perçue par les populations littorales et les pêcheurs comme une continuité de l’île de la plantation pour y habi...

Droits : info:eu-repo/semantics/openAccess
urn:doi:10.4000/etudescaribeennes.693
http://journals.openedition.org/etudescaribeennes/693

Éditeur(s) : HAL CCSD Springer Verlag (Germany) Springer Verlag
Résumé : Direct numerical simulations of flow through two millimeter-scale rock samples of limestone and sandstone are performed using three diverse fluid dynamic simulators. The resulting steady-state velocity fields are compared in terms of the associated empirical probability density functions (PDFs) and key statistics of the velocity fields. The pore space geometry of each sample is imaged at 5.06−μm voxel size resolution using X-ray microtomography. The samples offer contrasting characteristics in terms of total connected porosity (about 0.31 for the limestone and 0.07 for the sandstone) and are typical of several applications in hydrogeology and petroleum engineering. The three-dimensional fluid velocity fields within the explicit pore spaces are simulated using ANSYS® FLUENT® ANSYS Inc. (2009), EULAG Prusa et al. (Comput. Fluids 37, 1193–1207 2008), and SSTOKES Sarkar et al. (2002). These computational approaches are highly disperse in terms of algorithmic complexity, differ in terms of their governing equations, the adopted numerical methodologies, the enforcement of internal no-slip boundary conditions at the fluid-solid interface, and the computational mesh structure. As metrics of comparison to probe in a statistical sense the internal similarities/differences across sample populations of velocities obtained through the computational systems, we consider (i) integral quantities, such as the Darcy flux and (ii) main statistical moments of local velocity distributions including local correlations between velocity fields. Comparison of simulation results indicates that mutually consistent estimates of the state of flow are obtained in the analyzed samples of natural pore spaces despite the considerable differences associated with the three computational approaches. We note that in the higher porosity limestone sample, the structures of the velocity fields obtained using ANSYS FLUENT and EULAG are more alike than either compared against the results obtained using SSTOKES. In the low-porosity sample, the structures of the velocity fields obtained by EULAG and SSTOKES are more similar than either is to the fields obtained using ANSYS FLUENT. With respect to macroscopic quantities, ANSYS FLUENT and SSTOKES provide similar results in terms of the average vertical velocity for both of the complex microscale geometries considered, while EULAG tends to render the largest velocity values. The influence of the pore space structure on fluid velocity field characteristics is also discussed.
ISSN: 1420-0597

hal-01174152
https://hal.archives-ouvertes.fr/hal-01174152
DOI : 10.1007/s10596-015-9486-7

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
ISSN: 0012-8252

hal-01671832
https://hal-univ-rochelle.archives-ouvertes.fr/hal-01671832
DOI : 10.1016/j.earscirev.2016.12.005

Éditeur(s) : HAL CCSD
Résumé : International audience
Understand the dynamics of the fresh-salt water interface in aquifers is a key issue to comprehend mixing processand to quantity the discharge of nutrients in to coastal areas. In order to go beyond the current knowledge inthis issue an experimental site has been set up at the alluvial aquifer Riera Argentona (Barcelona – Spain). Thesite comprises 16 shallow piezometers installed between 30 and 90 m from the seashore, with depths rangingbetween 15 and 25 meters. The seawater interface is being monitored using several techniques, the combinationof which will help us to understand the spatial and temporal behaviour of the mixing zone and the geochemicalprocesses occurring there. Specially the deepest piezometers are equipped with electrodes in order to performcross-hole electrical resistivity tomography (CHERT). In addition, all piezometers are also equipped with FiberOptic cable to perform distributed temperature measurements. Two single steel armoured fibre optic cable lines ofaround 600m length were installed in all boreholes. The objective is to use the cable both as passive and activetemperature sensor. The first is being done for the continuous monitoring of temperature whereas; the secondprovides a higher temperature resolution used to monitor field experiments.Periodic CHERT measurements are carried out between the piezometer equipped with electrodes, resultingin parallel and perpendicular vertical cross sections of the site resistivity. The position of the fresh-salt waterinterface can be identified due to the resistivity contrast between the saline and fresh water. Preliminary resultsof periodic distributed temperature measurements will be also be used to monitor the position of the mixing zonethanks to the contrast and seasonal temperature changes. Periodic down-hole EC profiles will be used to validatethe method.AcknowledgementsThis work was funded by the projects CGL2013-48869-C2-1 y CGL2013-48869-C2-2-R of the Spanish Government.We would like to thank SIMMAR (Serveis Integrals de Manteniment del Maresme) and the ConsellComarcal del Maresme in the construction of the research site
European Geosciences Union General Assembly 2016
Vienne, Austria

insu-01308757
https://hal-insu.archives-ouvertes.fr/insu-01308757

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
Strain and strain rate partitioning in partially molten rocks are two of the important mechanisms that govern the process of coupling and/or decoupling of the partially molten lithosphere. Consequently, the proportion of partial melt and crystals and their network in partially molten rocks influence the degree of the partitioning along with the bulk rheology of the system. This study explores the possible role of finite strain and strain rate on the rate and volume of partial melting and crystallization in a metapelitic system undergoing deformation. Cylinders of synthetic quartz-muscovite aggregate (7: 3 volume ratio) were deformed in torsion at 750 C, 300 MPa and constant shear strain rate ((gamma) over dot = 3 x 10(-4) s(-1)) for finite shear strains (gamma) 1-15. The deformed samples were studied along the longitudinal tangential ( LT) and axial ( LA) sections to obtain the data along a range of strain rates for a given finite strain and vice versa. The results showed that deformation plays an important role on the kinetics of partial melting and crystallization. With increasing strain rate, amount and rate of crystallization comprise the volumetrically dominant process compared to partial melting at a given finite strain. In contrast, when the strain rate is constant, partial melting is the dominant process over crystallization up to moderate strain (gamma < 5). The dominant process reverses at higher strain, and the system shows more crystallization than partial melting. Application of the experimental data to geological systems implies that for metapelites a significant amount (similar to 20%) of partial melt can generate at high strain rate and moderate strain (gamma similar to 7), but at high strain (gamma = 15) the system is melt depleted. Under such conditions, decoupling should take place in brittle-ductile mode. On the other hand, rocks undergoing deformation with low strain rates and strain (gamma < 3) contain more than 25% partial melt, which can act as a major decoupling agent by localizing ductile shear zones.
ISSN: 0148-0227

hal-00617714
https://hal.archives-ouvertes.fr/hal-00617714
DOI : 10.1029/2010JB007865

Éditeur(s) : HAL CCSD Oxford University Press (OUP)
Résumé : International audience
Rifting in a cratonic lithosphere is strongly controlled by several interacting processes including crust/mantle rheology, magmatism, inherited structure and stress regime. In order to better understand how these physical parameters interact, a 2 yr long seismological experiment has been carried out in the North Tanzanian Divergence (NTD), at the southern tip of the eastern magmatic branch of the East African rift, where the southward-propagating continental rift is at its earliest stage. We analyse teleseismic data from 38 broad-band stations ca. 25 km spaced and present here results from their receiver function (RF) analysis. The crustal thickness and Vp/Vs ratio are retrieved over a ca. 200 × 200 km2 area encompassing the South Kenya magmatic rift, the NTD and the Ngorongoro-Kilimanjaro transverse volcanic chain. Cratonic nature of the lithosphere is clearly evinced through thick (up to ca. 40 km) homogeneous crust beneath the rift shoulders. Where rifting is present, Moho rises up to 27 km depth and the crust is strongly layered with clear velocity contrasts in the RF signal. The Vp/Vs ratio reaches its highest values (ca. 1.9) beneath volcanic edifices location and thinner crust, advocating for melting within the crust. We also clearly identify two major low-velocity zones (LVZs) within the NTD, one in the lower crust and the second in the upper part of the mantle. The first one starts at 15–18 km depth and correlates well with recent tomographic models. This LVZ does not always coexist with high Vp/Vs ratio, pleading for a supplementary source of velocity decrease, such as temperature or composition. At a greater depth of ca. 60 km, a mid-lithospheric discontinuity roughly mimics the step-like and symmetrically outward-dipping geometry of the Moho but with a more slanting direction (NE–SW) compared to the NS rift. By comparison with synthetic RF, we estimate the associated velocity reduction to be 8–9 per cent. We relate this interface to melt ponding, possibly favouring here deformation process such as grain-boundary sliding (EAGBS) due to lithospheric strain. Its geometry might have been controlled by inherited lithospheric fabrics and heterogeneous upper mantle structure. We evidence that crustal and mantle magmatic processes represent first order mechanisms to ease and locate the deformation during the first stage of a cratonic lithospheric breakup.
ISSN: 0956-540X

hal-01622078
https://hal.archives-ouvertes.fr/hal-01622078
https://hal.archives-ouvertes.fr/hal-01622078/document
https://hal.archives-ouvertes.fr/hal-01622078/file/plasmanGJI2017.pdf
DOI : 10.1093/gji/ggx177

Éditeur(s) : HAL CCSD
Résumé : International audience
The 20th Caribbean Academy of Sciences Biennal Meeting was held in Guadeloupe, FWI, on November 24 th to 26 th, 2016. It has gathered over 130 participants from more than 14 countries within or outside the Caribbean. In this booklet, you may find all abstracts form the scientific sessions, and the desciption of two round tables and three symposiums. Sessions were as followed :- Poster session- Mathematics and Informatics- Science Education- Physics of the Athmosphere- Medical Sciences (1)- Interface and Material Physics- Radiochemistry and Nuclear Medicine and Biomolecules- Interdisciplinary Oral Session- Biology- Hydrology and Hydrodynamics- Material and Environmental Chemistry- Medical Sciences (2)
https://hal.univ-antilles.fr/hal-01413318
Dehaies, Guadeloupe

hal-01413318
https://hal.univ-antilles.fr/hal-01413318
https://hal.univ-antilles.fr/hal-01413318v2/document
https://hal.univ-antilles.fr/hal-01413318/file/CAS_2016_Booklet.pdf

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
A suite of eclogite xenoliths from the Roberts Victor kimberlite (South Africa) is remarkable for its high abundances of base metal sulfides (BMS; up to 2 modal %). However, while sulfides are nearly ubiquitous in Type I eclogites (garnet > 0.07% Na2O), Type II eclogites (garnet < 0.07% Na2O) systematically lack sulfides. Two different sulfide assemblages are recognised within the Type I xenolith suite. Both populations are polyphase Cu-Ni-Fe sulfides, one characterised by the pyrrhotite (Po) + pentlandite (Pn) + chalcopyrite (Cp) assemblage and the other by the smythite/violarite (Smy/Vi) + (Ni)pyrite (Py) + Cp assemblage. The latter is the most abundant assemblage and reflects the supergene alteration of the "primary" Po + Pn + Cp assemblage. This process overprints the original composition of the sulfides by remobilising elements such as S, Fe, Ni, Se and Te. In the Type I eclogites, BMS occur as inclusions within silicates (garnet and clinopyroxene) and as interstitial grains. No chemical differences were observed between enclosed and interstitial sulfides. However, their relative abundances are correlated, indicating a similar origin. The Po + Pn + Cp assemblage is identical to eclogitic sulfides previously described in some Roberts Victor diamonds. Silicate-enclosed sulfides could appear to be early phases, but they are restricted to the outer parts of the silicate grains, suggesting a late incorporation during partial recrystallisation of silicate phases, induced by fluid-rock percolation-reaction during a metasomatic event. Positive whole-rock correlations between Se and (La/Sm)N⁎ and between Cu and ΣLREEN⁎ indicate a direct link between sulfide content and the enrichment of Mg + incompatible elements in the Type I eclogites, further supporting a metasomatic origin of the sulfide component. Similarly, a negative correlation between ΣLREEN⁎ and Cucpx implies that the metasomatic agent was at least partially composed of S-rich fluid (e.g. H2S, SO2) that reacted with the rock and leached Cu out of the silicates. The coupling between sulfides and LREE in the Type I eclogites, as well as the absence of sulfides and metasomatic features (e.g. unequilibrated grain boundaries, melt pockets, fluid inclusions, phlogopite) in the Type II eclogites, demonstrate that Type II eclogites did not undergo such a metasomatic event and therefore may represent the less-modified protoliths of Type I eclogites.
ISSN: 0009-2541

hal-00903856
https://hal.archives-ouvertes.fr/hal-00903856
DOI : 10.1016/j.chemgeo.2013.06.015

Éditeur(s) : HAL CCSD
Résumé : International audience
The aim of the present study was to determine the effects of 40 km of cycling on the biomechanical and cardiorespiratory responses measured during the running segment of a classic triathlon, with particular emphasis on the time course of these responses. Seven male triathletes underwent four successive laboratory trials: (1) 40 km of cycling followed by a 10-km triathlon run (TR), (2) a 10-km control run (CR) at the same speed as TR, (3) an incremental treadmill test, and (4) an incremental cycle test. The following ventilatory data were collected every minute using an automated breath-by-breath system: pulmonary ventilation VE, l x min[-1]), oxygen uptake (VO2, ml x min(-1) x kg[-1]), carbon dioxide output (ml x min[-1]), respiratory equivalents for oxygen (VE/VO2) and carbon dioxide (VE/VCO2), respiratory exchange ratio (R) respiratory frequency (f, breaths x min[-1]), and tidal volume (ml). Heart rate (HR, beats x min[-1]) was monitored using a telemetric system. Biomechanical variables included stride length (SL) and stride frequency (SF) recorded on a video tape. The results showed that the following variables were significantly higher (analysis of variance, P < 0.05) for TR than for CR: VO2 [51.7 (3.4) vs 48.3 (3.9) ml x kg(-1) x min(-1), respectively], VE [100.4 (1.4) l x min(-1) vs 84.4 (7.0) l x min(-1)], VE/VO2 [24.2 (2.6) vs 21.5 (2.7)] VE/VCO2 [25.2 (2.6) vs 22.4 (2.6)], f[55.8 (11.6) vs 49.0 (12.4) breaths x min(-1)] and HR [175 (7) vs 168 (9) beats x min(-1)]. Moreover, the time needed to reach steady-state was shorter for HR and VO2 (1 min and 2 min, respectively) and longer for VE (7 min). In contrast, the biomechanical parameters, i.e. SL and SF, remained unchanged throughout TR versus CR. We conclude that the first minutes of the run segment after cycling in an experimental triathlon were specific in terms of VO2 and cardiorespiratory variables, and nonspecific in terms of biomechanical variables.
EUROPEAN JOURNAL OF APPLIED PHYSIOLOGY

hal-00720703
https://hal.univ-antilles.fr/hal-00720703
https://hal.univ-antilles.fr/hal-00720703/document
https://hal.univ-antilles.fr/hal-00720703/file/EJAP.pdf

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
We investigated the deformation mechanisms and the seismic properties of 10 eclogite samples from different localities (Alps, Norway, Mali and eastern China) through the analysis of their microstructures and lattice-preferred orientations (LPO). These samples are representative of various types and intensity of deformation under eclogitic metamorphic conditions. Omphacite and garnet LPO were determined from electron backscatter diffraction (EBSD) technique. Garnet appears to be almost randomly oriented whereas omphacite develops strong LPO, characterized by the [001]-axes concentrated sub-parallel to the lineation, and the (010)-poles concentrated sub-perpendicular to the foliation. In order to analyze the deformation mechanisms that produced such omphacite LPO, we compare our observations to LPO simulated by viscoplastic self-consistent numerical models. A good fit to the measured LPO is obtained for models in which the dominant slip systems are 1/2h110i{11 ¯ 0}, [001] {110} and [001] (100). Dominant activation of these slip systems is in agreement with TEM studies of naturally deformed omphacite. Seismic properties of eclogite are calculated by combining the measured LPO and the single crystal elastic constants of omphacite and garnet. Although eclogite seismic anisotropies are very weak (less than 3% for both P-and S-wave), they are generally characterized by a maximum P-wave velocity sub-parallel to the lineation and by a minimum velocity approximately normal to foliation. The mean P-and S-wave velocities are high (respectively, 8.6 and 4.9 km/s). The S-wave anisotropy pattern displays complex relationships with the structural frame but the fast polarization plane generally tends to be parallel to the foliation. Calculated reflection coefficients show that an eclogite/crust interface is generally a good reflector (Rc > 0.1), whereas an eclogite body embedded in the upper mantle would be hardly detectable.
ISSN: 0040-1951

hal-01389715
http://hal.univ-reunion.fr/hal-01389715
http://hal.univ-reunion.fr/hal-01389715/document
http://hal.univ-reunion.fr/hal-01389715/file/Bascou_eclo-sismo_tphy2001_hal.pdf
DOI : 10.1016/S0040-1951(01)00156-1

Éditeur(s) : HAL CCSD Springer Verlag
Résumé : International audience
North Tanzanian Divergence is the first stage of continental break-up of East African Rift (<6 Ma) and is one of the most concentrated areas of carbonatite magmatism on Earth, with singular Oldoinyo Lengai and Kerimasi volcanoes. Hanang volcano is the southernmost volcano in the North Tanzanian Divergence and the earliest stage of rift initiation. Hanang volcano erupted silica-undersaturated alkaline lavas with zoned clinopyroxene, nepheline, andradite-schorlomite, titanite, apatite, and pyrrhotite. Lavas are low MgO-nephelinite with low Mg# and high silica content (Mg# = 22.4–35.2, SiO2 = 44.2–46.7 wt%, respectively), high incompatible element concentrations (e.g. REE, Ba, Sr) and display Nb–Ta fractionation (Nb/Ta = 36–61). Major elements of whole rock are consistent with magmatic differentiation by fractional crystallization from a parental melt with melilititic composition. Although fractional crystallization occurred at 9–12 km and can be considered as an important process leading to nephelinite magma, the complex zonation of cpx (e.g. abrupt change of Mg#, Nb/Ta, and H2O) and trace element patterns of nephelinites recorded magmatic differentiation involving open system with carbonate–silicate immiscibility and primary melilititic melt replenishment. The low water content of clinopyroxene (3–25 ppm wt. H2O) indicates that at least 0.3 wt% H2O was present at depth during carbonate-rich nephelinite crystallization at 340–640 MPa and 1050–1100 °C. Mg-poor nephelinites from Hanang represent an early stage of the evolution path towards carbonatitic magmatism as observed in Oldoinyo Lengai. Paragenesis and geochemistry of Hanang nephelinites require the presence of CO2-rich melilititic liquid in the southern part of North Tanzanian Divergence and carbonate-rich melt percolations after deep partial melting of CO2-rich oxidized mantle source.
ISSN: 0010-7999

hal-01467390
https://hal.archives-ouvertes.fr/hal-01467390
DOI : 10.1007/s00410-016-1273-5

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
GenMol (TM) code is used to simulate Atomic Force Microscopy (AFM) tests at a kaolinite/brine/kaolinite contact, the confined fluid in sub-nanometre interspaces being in equilibrium with an external multi-species solution. The attraction/repulsion effort, i.e. the derivative versus the interspace aperture h of the interaction energy between both kaolinite faces, is computed versus the variable composition of the confined fluid (see for the method Part I of this work). Two external solutions are tested. Solution Si is a neutral brine (pH=7.5) leading to a possible attraction for apertures lower than 7 angstrom. Solution S2 is an acidified brine (pH=3.2) leading to repulsion whatever may be the aperture h. These two AFM simulations prove the existence of a critical pH value (3.2 < pH(crit) < 7.5) of the external solution, below which the acidification of a natural brine in a CO2 confinement inhibits adhesion between kaolinite aggregates.
ISSN: 0022-0248

hal-00544678
https://hal.archives-ouvertes.fr/hal-00544678
DOI : 10.1016/j.jcrysgro.2010.08.012

Éditeur(s) : HAL CCSD Oxford University Press (OUP)
Résumé : International audience
Correlations between major and minor transition elements in tectonically emplaced orogenic peridotites have been ascribed to variable degrees of melt extraction and melt–rock reaction processes, leading to depletion or refertilization. To elucidate how such processes are recorded in the subcontinental lithospheric mantle, we processed a large geochemical dataset for peridotites from the four tectono-metamorphic domains of the Beni Bousera orogenic massif (Rif Belt, northern Morocco). Our study reveals that variations in bulk-rock major and minor elements, Mg-number and modal mineralogy of lherzolites, as well as their clinopyroxene trace element compositions, are inconsistent with simple partial melting and mainly resulted from different reactions between melts and depleted peridotites. Up to 30% melting at < 3 GPa and cryptic metasomatism can account for the geochemical variations of most harzburgites. In Grt–Sp mylonites, melting and melt–rock reactions are masked by tectonic mixing with garnet pyroxenites and subsolidus re-equilibration. In the rest of the massif, lherzolites were mostly produced by refertilization of a refractory protolith (Mg-number ∼ 91, Ol ∼ 70%, Cpx/Opx = 0·4) via two distinct near-solidus, melt–rock reactions: (1) clinopyroxene and orthopyroxene precipitation and olivine consumption at melt/rock ratios <0·75 and variable mass ratio between crystallized minerals and infiltrated melt (R), which are recorded fairly homogeneously throughout the massif; (2) dissolution of orthopyroxene and precipitation of clinopyroxene and olivine at melt/rock ratios ≤1 and R = 0·2–0·3, which affected mainly the Ariègite–Seiland and Seiland domains. The distribution of secondary lherzolites in the massif suggests that the first refertilization reaction occurred prior to the differentiation of the Beni Bousera mantle section into petro-structural zones, whereas the second reaction was associated with the development of the tectono-metamorphic domains. Our data support a secondary, refertilization-related origin for most lherzolites in orogenic peridotite massifs.
ISSN: 0022-3530

hal-01526901
https://hal.archives-ouvertes.fr/hal-01526901
DOI : 10.1093/petrology/egx003

Éditeur(s) : HAL CCSD European Geosciences Union (EGU) European Geosciences Union
Résumé : The Moroccan Mediterranean coast is located in one of the area's most vulnerable to extreme weather events or tsunami hazards. The objective of this research is to reconstruct the historical extreme submersion-event record using sea-induced deposits preserved in coastal lagoon. The Nador lagoon is the largest Moroccan lagoon (115 km2). It is located along the western Mediterranean, which has a high cyclogenetic character and is exposed to tsunamis from the Alboran Sea. The sandy barrier which separates the lagoon from the Mediterranean Sea is marked by much overwash, which indicate how intensely it has been exposed to the adverse sea events through history. Using the UWITEC© gravity coring platform, an undisturbed MC4.5 core (1.15 m long) was successfully sampled in the studied lagoon. To identify extreme sea events, a multi-proxy approach was applied combining sedimentological and geochemical data. Three paleoevents were identified; all of them are concentrated over the last 500 years, and the most recent event corresponds to the 1889 storm. For the others deposits, it is difficult to determine exactly their origin; however, the high frequency of storm events over the relevant period and the absence of historical tsunamis evidence is more in favor of the meteorological origin.
ISSN: 1561-8633

hal-01146451
https://hal.archives-ouvertes.fr/hal-01146451
DOI : 10.5194/nhess-15-203-2015

Éditeur(s) : HAL CCSD
Résumé : International audience
Previous studies have reported respiratory, cardiac and muscle changes at rest in triathletes 24 h after completion of the event. To examine the effects of these changes on metabolic and cardioventilatory variables during exercise, eight male triathletes of mean age 21.1 (SD 2.5) years (range 17-26 years) performed an incremental cycle exercise test (IET) before (pre) and the day after (post) an official classic triathlon (1.5-km swimming, 40-km cycling and 10-km running). The IET was performed using an electromagnetic cycle ergometer. Ventilatory data were collected every minute using a breath-by-breath automated system and included minute ventilation (V(E)), oxygen uptake (VO2), carbon dioxide production (VCO2), respiratory exchange ratio, ventilatory equivalent for oxygen (V(E)/VO2) and for carbon dioxide (V(E)/VCO2), breathing frequency and tidal volume. Heart rate (HR) was monitored using an electrocardiogram. The oxygen pulse was calculated as VO2/HR. Arterialized blood was collected every 2 min throughout IET and the recovery period, and lactate concentration was measured using an enzymatic method. Maximal oxygen uptake (VO2max) was determined using conventional criteria. Ventilatory threshold (VT) was determined using the V-slope method formulated earlier. Cardioventilatory variables were studied during the test, at the point when the subject felt exhausted and during recovery. Results indicated no significant differences (P > 0.05) in VO2max [62.6 (SD 5.9) vs 64.6 (SD 4.8) ml x kg(-1) x min(-1)], VT [2368 (SD 258) vs 2477 (SD 352) ml x min(-1)] and time courses of VO2 between the pre- versus post-triathlon sessions. In contrast, the time courses of HR and blood lactate concentration reached significantly higher values (P < 0.05) in the pre-triathlon session. We concluded that these triathletes when tested 24 h after a classic triathlon displayed their pre-event aerobic exercise capacity, bud did not recover pretriathlon time courses in HR or blood lactate concentration.
EUROPEAN JOURNAL OF APPLIED PHYSIOLOGY

hal-00720432
https://hal.univ-antilles.fr/hal-00720432
https://hal.univ-antilles.fr/hal-00720432/document
https://hal.univ-antilles.fr/hal-00720432/file/Article_2.pdf