Éditeur(s) : HAL CCSD American Association of Petroleum Geologists
Résumé : In reservoir engineering, hydrodynamic properties can be estimated from downhole electrical data using heuristic models (e.g., Archie and Kozeny-Carman's equations) relating electrical conductivity to porosity and permeability. Although proven to be predictive for many sandstone reservoirs, the models mostly fail when applied to carbonate reservoirs that generally display extremely complex pore network structures. In this article, we investigate the control of the three-dimensional (3-D) geometry and morphology of the pore network on the electrical and flow properties, comparing core-scale laboratory measurements and 3-D x-ray microtomography image analysis of samples from a Miocene reefal carbonate platform located in Mallorca (Spain). The results show that micrometer- to centimeter-scale heterogeneities strongly influence the measured macroscopic physical parameters that are then used to evaluate the hydrodynamic properties of the rock, and therefore, existing models might not provide accurate descriptions because these heterogeneities occur at scales smaller than those of the integration volume of the borehole geophysical methods. However, associated with specific data processing, 3-D imagery techniques are a useful and probably unique mean to characterize the rock heterogeneity and, thus, the properties variability.
ISSN: 0149-1423

hal-00950066
https://hal.archives-ouvertes.fr/hal-00950066
DOI : 10.1306/05221312134

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
A large sand injectite network is very well exposed in the area of Bevons, Southeast France. The associated sandstone turbiditic channel–fill and the host marls are the Aptian–Albian rocks of the Vocontian Basin. The sand injection network is composed of dykes, sills and sedimentary laccoliths ranging in thickness from mm to pluri–m. The dykes and sills have vertical and horizontal lengths of up to and over 100 m and 1 km, respectively. Outcrop observations show that the architecture and morphology of the sand injectites in the marls is governed by the local stress field during injection, pre–existing faults, the host–rock lithology, compaction, and distance to the potential sand source(s). The main set of dykes is oriented N50–60° perpendicular to the minimum compressive stress σ3 during sand injection. Two other sets of dykes are intruded along pre–existing syn–sedimentary faults oriented N140–150° (set 2) and N90° (set 3) during the Apto–Cenomanian interval. Sills and dykes thin laterally away from their potential sand sources and thin laterally away from them. The vertical thickness variations of the dykes and wings are more complex, as thinning away from the sand sources is often compensated by thickening toward the palaeo–surface. Based on field observations and measurements, we characterized the 3D architecture of the sand injectites and showed that the injectites probably formed due to a forceful injection from an overpressured sand body sealed by low–permeability lithologies.
ISSN: 0191-8141

hal-01243488
https://hal.archives-ouvertes.fr/hal-01243488
DOI : 10.1016/j.jsg.2015.07.001

Éditeur(s) : HAL CCSD Société géologique de France
Résumé : In the eastern Pyrenees, the lherzolites always outcrop as restricted bodies scattered across Mesozoic sedimentary units along the North Pyrenean fault. In this article, we focus on the sedimentary processes associated with the tectonic exhumation of the mantle rocks during the Lower Cretaceous and we provide a new detailed analysis of the ultramafic-bearing sedimentary sequences associated with the Lherz body. The Lherz body, 1.5 km long only, belongs to a series of ultramafic bodies of restricted size (a few m to some hundred of m), occurring within sedimentary formations composed mostly of carbonate breccias originating from the reworking of Mesozoic platform limestones and dolomites. The carbonate clasts include marbles displaying different evolutions in relation with the Cretaceous thermal metamorphic event. The clastic formations also include numerous layers of polymictic breccias reworking ultramafic clasts. These layers are found far from any peridotitic body, implying that ultramafic clasts have been transported far away from their sources by sedimentary processes after their disaggregation on the seafloor. In addition, clasts of ultramafic-rich breccias and sandstones are also observed which indicates rapid sedimentation and diagenesis within a tectonically active environment. We discuss the significance of these deposits and their bearing on our understanding of the tectono-sedimentary processes associated with mantle exhumation in a context of development of narrow intracontinental basins suffering extreme crustal thinning.
EISSN: 1777-5817

hal-00766884
https://hal.archives-ouvertes.fr/hal-00766884
DOI : 10.2113/gssgfbull.183.5.443

Éditeur(s) : HAL CCSD
Résumé : The Neogene geodynamics evolution of the south-Alboran realm in western Mediterranean has been clarified, based on sedimentological and chronostratigraphical studies. This work focuses on three main themes of research, the first is to establish the moments for the opening and closing of the North Rifian Corridor by studying two Neogene basins of the southern edge of the Alboran sea. The second, aims to understand the behavior of these two basins face a major event in the history of the Mediterranean: The Messinian Salinity Crisis. Finally, the third theme aims to understand the modalities Post-MSC reflooding in the southern part of the Alboran realm.The late Miocene evolution of the North Rifian Corridor is clarified on the basis of chronostratigraphic studies of the Neogene Boudinar and Arbaa Taourirt basins (northeastern Morocco). The marine sediments deposited in the Boudinar basin between the early Tortonian and the late early Messinian (10 Ma to 6.1 Ma) and in the late Tortonian-earliest Messinian interval in the Arbaa Taourirt basin. Palaeoenvironmental data record a major drowning in association with extensive tectonics in the Boudinar basin during the early Messinian at ~7.2 Ma. At the same time, prograding conglomerates and sandstones developed over the late Tortonian marls in the Arbaa Taourirt basin. During the late-early Messinian, a shallowing trend occurred in the Boudinar basin. Thus, the North Rifian Corridor opened at ~7.2 Ma ensuring Atlantic-Mediterranean connections, then was progressively restricted during the late-early Messinian and totally closed at ~6.1 Ma. New sedimentological and paleontological studies of the late Messinian-early Pliocene deposits in the Boudinar basin provide new information on the Messinian Salinity Crisis (« MSC ») and the Zanclean reflooding in the Alboran sea. The Messinian erosional surface « MES » is of late Messinian age and was emplaced in subaerial settings. It is polygenic, its original geometry is locally preserved and was re-shaped by the Pliocene transgressive surface. Above the « MES », the Boudinar basin infill is characterized by a wide variety of facies from continental settings to lower offshore conditions. Two major sets are recognized: a latest Messinian-Zanclean set that constitutes a transgressive-regressive megasequence interrupted at the top by a tectonic unconformity, and an Plio-Quaternary regressive set. During the late Messinian Zanclean interval, four successive depositional models were documented. They record major changes in palaeoflow and paleogeography related to base-level fluctuations. No Gilbert-type delta has ben identified at Boudinar. the beginning of base-level rise is marked by normal regressions and by the formation of several lacs and fan-delta complexes on the margins of the basin in the late Messinian and befor the marine reefloding in the early Zanclean. The marine reflooding of the basin appears later, with a transgressive surface of ravinment and a thick package of transgressive deposits. These transgressive deposits onlap over all previous deposits. The major part of the basin infill did not issue from an inner landward position (south of the basin) but from the northwestern side of the basin, i.e. near the Mediterranean. Sediments were subsequently reworked by storms and transported by longshore-drift towards the south. a maximum flooding surface is found several tens of metres above the « MES ». This fiding is consistent with a progressive and not a catastrophic early Zanclean flooding of the westernMediterranean after the Mediterranean base-level fall.
Sur la base d’études sédimentologiques et chronostratigraphiques dans les bassins de Boudinar et d’Arbaa Taourirt (Rif oriental, Maroc), l’évolution géodynamique néogène du domaine sud-Alboran en Méditerranée occidentale a été clarifiée. Ce travail est axé sur trois grandes thématiques de recherche. La première vise à l’établissement d’un cadre chronostratigraphique pour l’ouverture et la fermeture du Couloir Nord Rifain, par l’étude de deux bassins nèogènes de la bordure sud de la mer d’Alboran. La deuxième, vise à comprendre le comportement de ces deux bassins face à un événement majeur de l’histoire de la Mediterranée : la Crise de salinité messinienne. Finalement, la troisième vise à comprendre les modalités de remise en eau de la Méditerranée après la Crise : le reenoiement pliocène. L'évolution du Couloir Nord Rifain au Miocène supérieur est clarifiée sur la base des études chronostratigraphiques des bassins néogènes de Boudinar et d'Arbaa Taourirt (Maroc Nord oriental). Les sédiments marins miocènes se sont déposés entre le Tortonien inférieur et le Messinien inférieur (10 à 6.1 Ma) dans le bassin de Boudinar et entre le Tortonien supérieur et le Messinien inférieur dans le bassin d'Arbaa Taourirt. Les données paléoenvironnementales enregistrent un ennoyage important du bassin de Boudinar en relation avec une tectonique extensive pendant le Messinien inférieur (~7.2 Ma). En même temps, des conglomérats et de grès progradants se sont développés au-dessus des marnes tortoniennes dans le bassin d’Arbaa Taourirt. Le bassin de Boudinar a subi un désapprofondissement au Messinien inférieur. Ces résultats indiquent que le Couloir Nord Rifain s’est ouvert à ~7.2 Ma assurant les communications entre l’Atlantique et la Méditerranée, puis a subi une restriction progressive pendant le Messinien inférieur avant d’être totalement fermé à ~6.1 Ma.De nouvelles études sédimentologiques et paléontologiques des dépôts Messinien supérieur-Pliocène inférieur dans le bassin de Boudinar fournissent des informations sur la Crise de salinité messinienne (« MSC ») et le réennoiement zancléen dans la Mer d'Alboran. L’un des marqueurs majeurs de la Crise est identifié : la surface d’érosion messinienne « MES ». Elle est d'âge Messinien supérieur et a été mise en place dans des conditions subaériennes. Sa géométrie originale n’est préservée que localement et a été remodelée par la surface transgressive du Pliocène inférieur. Au dessus de la « MES » le remplissage sédimentaire du bassin de Boudinar est caractérisé par une grande variété de faciès allant des conditions de dépôts continentales jusqu’à des conditions d’offshore inférieur. Deux ensembles majeurs sont reconnus : un ensemble messinien terminal-zancléen qui constitue une mégaséquence transgressive-regressive, interrompue au sommet par une discordance tectonique, et un ensemble plio-quaternaire regressif. Durant l’intervalle Messinien terminal-Zancléen, quatre modèles de dépôts successifs ont été documentés enregistrant des changements majeurs de paléocourants et de paléogéographies, liés aux fluctuations de niveau de base. Nous n’avons pas identifié de Gilbert delta à Boudinar. La remontée du niveau de base est marquée par une régression normale et par le développement des lacs et de complexes de fan-deltas sur les marges du bassin pendant le Messinien supérieur, avant l’inondation marine au Zancléen basal. Le réennoiement marin du bassin apparait plus tard avec une surface de transgression ravinante et par d’épais dépôts transgressifs, en onlap sur tous les dépôts précédents. La majeure partie du remplissage sédimentaire du bassin n’est pas reçue des reliefs de la bordure sud du bassin, mais du côté Nord-Ouset au bord de la Méditerranée. Les sédiments sont alors remaniés par les tempêtes et transportés vers le sud par la dérive littorale. Une surface d’inondation maximale a été identifiée à plusieurs dizaines de mètres au-dessus de la « MES ». Ceci suggère un ennoiement progressif et non catastrophique, après la chute du niveau de base méditerranéen.
https://tel.archives-ouvertes.fr/tel-01473572

Droits : http://hal.archives-ouvertes.fr/licences/copyright/
tel-01473572
https://tel.archives-ouvertes.fr/tel-01473572
https://tel.archives-ouvertes.fr/tel-01473572/document
https://tel.archives-ouvertes.fr/tel-01473572/file/Th%C3%A8se-achalhi.pdf

Éditeur(s) : HAL CCSD
Résumé : International audience
Continental erosion and weathering destroy parts of the stratigraphic record. Analyses of the sedimentary filling of paleokarsts help completing the geological record of regions that have been submitted to post-depositional, long-term, continental evolution. Jurassic carbonate platform of Languedoc (South of France) has undergone several karstification phases from Cretaceous to Neogene. Later incision of canyons through the carbonate massifs allows to observe paleokarsts over 400m depth, within the massifs. Paleokarsts are partly filled with sediments. Some have yielded marine bioclasts (echinoderms, radiolars), foraminifera and nannofossils; others are composed of polygenic detrital sediments, including sources from the upstream Paleozoic basement (Cevennes). The age of the filling of successive paleokarsts can be constrained by structural relationships and by biostratigraphy. These findings suggests 1) the marine elements of the karstic filling relate to a Late Cretaceous to Early Paleocene interval, while 2) the Paleozoic basement-sourced-sediments were trapped in the karst during Miocene to Present. Karstic sediment containing Early Paleocene foraminifera and nannofossils are found in paleokarsts cavities distributed across the entire thickness of the carbonate massif (≥350m). This requires base-level lowering and associated karstification, followed by base-level rise and karst filling of at least 350 m amplitude, respectively. The time interval corresponding to the occurrence of foraminifera and nannofossils in karsts covers 10 Myrs ; surprisingly, no equivalent marine sediments are preserved on the surface. In addition, analyses of the different forams species suggests several (up to 3) distinct karstification and marine filling cycles. Finally, sedimentological facies analysis of the karst filling reveals the following succession of processes: low energy settling of mudstone, high energy reworking, transport and deposition of silts and sandstones within the karst system. Integration of geological, paleontological and sedimentological data, leads to a polyphase scenario in response to repeated base-level variations, more than 350m amplitude. Such an amplitude excludes eustacy, and the improbable repeated sequence of uplift and subsidence rules out tectonics, as driving forces for base-level change, respectively. We propose that the high-amplitude base-level changes results from a succession of desiccation-flooding events of an endorheic, silled, basin during Early Paleogene. The later detrital assemblage sourced in the Cevennes occurs on perched paleosurfaces and in karst cavities across the whole 350m-deep canyon walls. When found on paleosurfaces, they correspond to the south-flowing Early Miocene fluvial drainage, and can be correlated downstream with the marine, well dated, Early Miocene, sediments. When found within the karst cavities, they correspond to successive base-level surfaces connected to the progressive incision of the canyon. This canyon incision is coeval with a Late Miocene uplift of the hinterland.
24th International Karstological School "Classical karst" : Paleokarst
Postojna, Slovenia

hal-01306683
https://hal-brgm.archives-ouvertes.fr/hal-01306683
https://hal-brgm.archives-ouvertes.fr/hal-01306683/document
https://hal-brgm.archives-ouvertes.fr/hal-01306683/file/Abstract_IKS.pdf

Éditeur(s) : HAL CCSD
Résumé : International audience
The carbon capture and storage is considered as one of the solutions of reducing the effects of global warming. It consists in injecting large quantities of CO 2 in supercritical form directly into deeply located geological formations. One of the methods involves sequestration in the carbonate sedimentary rocks (sandstones and limestones) which are considered as a promising solution. The morphology of the pore network and solid skeleton defines important macroscopic prop-erties of the rock (permeability, stiffness). Modelling at micro scale of random heterogeneous materials (porous media) should be based on morphological and statistical characterisation 1,2 of the investigated microstructure. The work is focused on a reconstruction method by grains deposit 3 , for various range of pa-rameters, to obtain equivalent model of natural rock samples (oolitic limestone and fontainebleau sandstone). Generated samples satisfy morphological and statistical informations 4 which were obtained by 3D image analysis of X-ray tomography of the natural rock samples. For validation of the modelling numerical computations of mechanical and transfer properties are also provided.
14th European Mechanics of Materials Conference - EMMC14
Gothembourg, Sweden

hal-01103163
https://hal.archives-ouvertes.fr/hal-01103163

Éditeur(s) : HAL CCSD Springer Verlag
Résumé : International audience
Propagation energies for five examples of deformation bands in porous sandstones from four field sites in Nevada, Utah, and France were calculated by using the J-integral approach. Pure compaction bands that accommodate primarily closing displacements from the Valley of Fire (Nevada) site have a closing-mode band propagation energy of J I = 5.5 ± 1.6 kJ/m2. Shear-enhanced compaction bands having subequal amounts of normal (closing) and shear strains across them from the same site have propagation energies of J I = 6.11 ± 1.8 kJ/m2 and J II = 1.52 ± 0.5 kJ/m2 for closing and shearing modes respectively. Closing- and shearing-mode band propagation energies for shear-enhanced compaction bands from the Buckskin Gulch (Utah) site, 5.63 ± 1.7 and 1.91 ± 0.57 kJ/m2 and the Uchaux (France) site, 11.0 ± 3.3 and 2.35 ± 0.7 kJ/m2 respectively are comparable to the values for similar structures from the Valley of Fire site. Cataclastic deformation bands at the Orange (France) site accommodate significantly larger values of shear offset than do shear-enhanced compaction bands, with a ratio of shear to closing offset that exceeds 7. The calculated closing- and shearing-mode propagation energies for these shear bands, 17.8 ± 5.4 and 3.3 ± 1.0 kJ/m2 respectively are comparable to those for pure or shear-enhanced compaction bands deformed at approximately the same depth of burial. Strain softening of cataclastic compactional shear bands implies unstable shearing, whereas stable and perhaps strain-hardening shearing may be inferred for shear-enhanced compaction bands. Displacement-length scaling relations for shear-enhanced compaction bands of the form D∝L are consistent with the results and with suggestions of band thickening during growth obtained from bifurcation analyses and with field observations of shear zones in porous host rock.
ISSN: 0376-9429

hal-00750341
https://hal.archives-ouvertes.fr/hal-00750341
DOI : 10.1007/s10704-012-9730-2

Éditeur(s) : HAL CCSD Geological Society of America
Résumé : International audience
Porous sandstones tend to deform by the formation of low-permeability deformation bands that influence fluid flow in reservoir settings. The bands may be distributed or localized into clusters, and limited recent data suggest that tectonic regime may exert control on their distribution and clustering. In order to explore this suggestion, we performed a synthetic analysis based of 73 sets of bands, including 22 new sets measured for a reverse Andersonian regime that fill the important gap in data for this context. We find a surprisingly strong correlation between clustering and tectonic regime, where bands clearly are more distributed in the reverse regime compared to the normal regime. Together with the observed band distributions, capillary pressure data show evidence that efficient membrane seals are expected for extension, whereas pervasive permeability anisotropy is expected for contraction. Such a basic new rule concerning tectonic regime is very useful for assessment of reservoir properties where deformation bands are common but below seismic resolution.
ISSN: 0091-7613

hal-01355925
https://hal.archives-ouvertes.fr/hal-01355925
DOI : 10.1130/G37585.1

Éditeur(s) : HAL CCSD Wiley
Résumé : International audience
Large-scale conical and saucer-shaped sand injectites have been identified in the Upper Miocene sediments of the Lower Congo Basin. These structures are evidenced on the 3D high-resolution seismic data at about 600 ms TWT (two-way traveltime) beneath the seabed. The conical and saucer-shaped anomalies range from 20 to 80 m in height, 50 to 300 m in diameter, and 10 to 20 ms TWT in thickness. They are located within a sedimentary interval of about 100 m in thickness and are aligned over 20 km in dip direction (NE-SW), above the NW margin of an underlying Upper Miocene submarine fan. We have interpreted the conical and saucer-shaped anomalies as upward-emplaced sand injectites sourced from the Upper Miocene fan because of their discordant character, the postsedimentary uplifting of the sediments overlying the cones and saucer-shaped bodies, the alignment with the lateral fringe of the Upper Miocene submarine fan, and the geological context. Sand injection dates from the Miocene-Pliocene transition (approximately 5.3 Ma). The prerequisite overpressure to the sand injection process may be due to the buoyancy effect of hydrocarbons accumulated in the margins of the fan. Additionally, overpressure could have been enhanced by the lateral transfer of fluids operating in the inclined margins of the lobe. The short duration of sand injection and the presence of many sandstone intrusions suggested that the process of injection was triggered by an event, likely due to a nearby fault displacement related to diapiric movements. This is the first time that sand injectites of seismic scale have been described from the Lower Congo Basin. The localized nature of these injectites has led to a change in the migration path of fluids through the sedimentary cover. Consequently, the sand intrusions are both evidence and vectors of fluid migration within the basin fill.
ISSN: 1468-8115

hal-00963594
https://hal.archives-ouvertes.fr/hal-00963594
DOI : 10.1111/gfl.12057

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
The outstanding exposure of deformation bands in a multilayer sequence of the Orange quarry, Provence, France, motivates a study investigating the development and controls of deformation band geometries by field mapping combined with finite element modeling. Field mapping yields new insights into angular relations between, and evolution of, the deformation bands as well as provides input parameters for the setup and boundary conditions of the numerical simulations using ADELI 2D. In particular, reverse-sense deformation bands are found to have developed within three of the four exposed layers of the multilayer stack with similar orientations to bedding, indicating layer-parallel contraction. Numerical simulations, carried out as a parametric study to investigate the influence on deformation band development and geometry, successfully reproduce the sequential development of deformation bands in the three layers as seen in the field as well as recreate the observed angular geometries of similar to 39 degrees to the maximum compression. This angular relationship is put into context with observations from other field studies and theoretical values to explore controls of deformation band orientations. Furthermore, band localization is impeded in the model by increased layer cohesive strength, demonstrating the importance of host-rock property variations on where localization of bands within the multilayer sequence. Results from both field investigation and numerical simulations are consistent with regional tectonics, where the strata underwent gentle folding due to thrust faulting at depth, and bring further insight into the development and geometry of deformation bands in both extensional and contractional tectonic regimes.
ISSN: 0148-0227

hal-00639452
https://hal.archives-ouvertes.fr/hal-00639452
DOI : 10.1029/2011JB008365

Éditeur(s) : HAL CCSD Geological Society of London
Résumé : International audience
The interplay between tectonics and erosion has a predominant control on the evolution of the morphology of mountain belts. Here we investigate the modalities of deformation in Central Nepal on a c. 100 ka time scale in response to tectonic and external forcings, through the use of a finite-element thermomechanical model coupled with an integrative denudation formulation that accounts for fluvial incision and hillslope landsliding. We study the complex coupling existing between tectonics and erosion, with special emphasis on the influences of rock strength and rainfall distributions. Our results underline the key role played by lithologic variations in the elevation of both rivers and mean topography. We show that the location of the Main Frontal Thrust is mainly controlled by the low erodability of the unconsolidated sandstone in the Siwaliks Hills. As previously suspected (Burbank et al. 2003), our simulations demonstrate that the pattern of uplift in Nepal is mainly dependent on both erodability and fault geometry, rather than on rainfall distribution.
ISSN: 2041-4927

hal-01543331
https://hal-amu.archives-ouvertes.fr/hal-01543331
DOI : 10.1144/GSL.SP.2006.253.01.18

Éditeur(s) : HAL CCSD Wiley-Blackwell
Résumé : Combined petrographic study and apatite fission track analysis (apatite FTA) across the Gres d'Annot basin document maximum temperatures reached by this turbiditic sandstone formation, from around 60 degrees C at the SW basin margin up to around 200 degrees C below the Penninic frontal thrust, in relation to burial below the front of Alpine nappes. Increasing diagenetic grade across the basin is primarily expressed by the development of silica transfer by pressure solution and correlated porosity loss. We infer the nappe thickness profile, from the nappe front in the SW up to around 8-10 km in the NE. Apatite FTA dates exhumation of the Gres d'Annot during the Late Miocene, in relation to thrusting of the underlying Argentera and Barrot Palaeozoic massifs. This study illustrates the influence of thrust front propagation on foreland basin diagenesis and exhumation, and highlights potential implications for the evolution of sediment reservoir properties in this context.
ISSN: 0954-4879

hal-00411860
https://hal.archives-ouvertes.fr/hal-00411860
DOI : 10.1111/j.1365-3121.2008.00793.x

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Gold mineralisation in the Yatela Main gold mine is hosted in a saprolitic residuum situated above Birimian supracrustal rocks, and at depth. The supracrustal rocks comprise metamorphosed calcitic and dolomitic marbles that were intruded by diorite (2106 ± 10 Ma, 207Pb/206Pb), and sandstone-siltstone-shale sequences (youngest detrital zircon population dated at 2139 ± 6 Ma). In-situ gold-sulphide mineralisation is associated with hydrothermal activity synchronous to emplacement of the diorite and forms a sub-economic resource; however, the overlying saprolitic residuum hosts economic gold mineralisation in friable lateritized palaeosols and aeolian sands (loess).Samples of saprolitic residuum were studied to investigate the morphology and composition of gold grains as a proxy for distance from source (and possible exploration vector) because the deposit hosts both angular and detrital gold suggesting both proximal and distal sources. U–Pb geochronology of detrital zircons also indicated a proximal and distal source, with the age spectra giving Archaean (2.83–3.28 Ga), and Palaeoproterozoic (1.95–2.20 Ga) to Neoproterozoic (1.1–1.8 Ga) zircons in the Yatela depocentre. The 1.1–1.8 Ga age spectrum restricts the maximum age for the first deposition of the sedimentary units in the Neoproterozoic, or during early deposition in the Taoudeni Basin. Models for formation of the residuum include distal and proximal sources for detritus into the depocentre, however, it is more likely that material was sourced locally and included recycled material. The creation of a deep laterite weathering profile and supergene enrichment of the residuum probably took place during the mid-Cretaceous-early Tertiary.
ISSN: 0899-5362

hal-01277679
https://hal.archives-ouvertes.fr/hal-01277679
DOI : 10.1016/j.jafrearsci.2015.07.017

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Fromthe Proterozoic to the Quaternary, the evolution of the Earthwas characterised by recurrent periods of glaciation.However, the margins of many ancient ice-sheets are poorly defined on palaeogeographic reconstructions.The extent and outlines of ancient ice sheets can be better understood through careful documentation ofsediments deposited at the ice-sheet margin. An outstanding example is provided herein based on an end-Ordovician archive in Libya (Tihemboka area, Murzuq Basin). The four sets of structures include: i) subglacialglaciotectonic structures and soft sediment deformations from flowing glacier ice, such as intraformational glacialstriae, intraformational deformation (shear planes, sheath folds), normal microfaults, and large-scaleglaciotectonic folds-and-thrusts; (ii) structures resulting from overpressured subglacial (meltwater) flowssuch as clastic dykes and tunnel valleys; (iii) proglacial depositional structures and facies related to highmagnitudemeltwater floods such as sandstone intraclasts, large-scale bedforms resulting from supercriticalflows, climbing-dune cross-stratification and kettle holes; and (iv) deformation structures resulting from freefloating and nonglacier ice such as ice-keel scours and ice-crystal marks. Such a set of structures points to anice-marginal (essentially continental) depositional setting, and provides an excellent suite of criteria to identifymargins of ancient ice sheets in the stratigraphic record. At a regional scale, a reconstruction through time andspace of the related depositional wedge is proposed. This corresponded to a seismic-scale (N120 m in thickness,40 km in length) ice-marginal wedge in front of an essentially warm-based ice-sheet inducing concomitantlarge-scale glaciotectonic deformation, glacial basin and tunnel valley downcuttings. The related ice-front wasassociated with high-energy meltwater flows feeding a network of deeply incised proglacial channels downstreamand, beyond them, a fluvioglacial deltaic system. Shallow ice-marginal permafrost most likely affectedthe depositional wedge. At a larger scale, the Tihemboka ice-marginal wedge is interpreted as related to a stillstandperiod over the Gondwana platform, developed over an estimated interval of a few thousands of years.Based on these data, the conditions that arose in a particularly favourable context for the development, the preservationand the identification of ice-marginal wedges in the geological record are reviewed. Significantmeltwater-derived sediment deposition and aggradation in an accommodation space resulting either frompreglacial inheritance, glacial downcuttings and/or glacio-isostatic lithospheric flexure, or active tectonic subsidence(>1 Myr) are required for their formation and subsequent preservation.
ISSN: 0012-8252

insu-01184739
https://hal-insu.archives-ouvertes.fr/insu-01184739
DOI : 10.1016/j.earscirev.2015.06.006

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The coastal sediments of Rhodes in the eastern Mediterranean have recorded transgression-regression cycles that took place during the early Pleistocene. The sedimentary deposits from the Kritika Member of the Rhodes Formation consist in conglomerates, sandstones, siltstones and clays deposited in brackish to shallow marine environments. Faunal associations are dominated by molluscs and reveal rapid ecological changes. Carbon and oxygen isotope ratios of aquatic skeletal carbonates show that these ecological changes were most likely driven by large salinity changes while water temperature remained rather constant at about 22.0 ± 1.5 °C. The tectonic activity of the island rather than glacio-eustatic variations of climatic origin is advocated to be responsible for the ecological and salinity changes and sea-level variations recorded in the sedimentary sequence.
ISSN: 0031-0182

hal-00767568
https://hal.archives-ouvertes.fr/hal-00767568
DOI : 10.1016/j.palaeo.2012.06.009

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The Urucum region (Mato Grosso do Sul, Brazil) contains Neoproterozoic–Cambrian manganese ore in the layers Mn-1, Mn-2, and Mn-3, which are interbedded with iron formations (IFs) from the Santa Cruz Formation (Jacadigo Group) and surrounded by carbonate rocks from the Bocaina and Tamengo Formations (Corumbá Group). These rocks fill an ancient graben, with sediments from the Santa Cruz Formation overlying fluvial deposits from the Urucum Formation and limestones from the Bocaina and Tamengo Formations deposited in the shallow marginal regions. As the graben deepened, it was flooded with microbe-rich seawater and hydrothermalism began. Iron and manganese precipitated within the pores in arkosic sandstones, thereby forming the clastic Lower Mn-1 ore layer. The remaining manganese was simultaneously deposited on the basin floor with clastic clay and silt from turbidity currents, thereby forming the Upper Mn-1 clastic–chemical ore layer. The sedimentation of Mn-1 and its host IFs was controlled by seawater saturation and homogeneous oxidation, which caused manganese and iron sedimentation and the death of microorganisms, generating mangano-ferriferous sediments with high P, Co and Ni contents. Mn-2 formed during periods of tectonic quiescence through water influxes that carried abundant microbes, Fe(II), Mn(II), and SiO2. Under UV radiation, these microbes oxidized Mn(II) and Fe(II) to form hydroxides and died, thereby forming biomass that was enriched in P, Co and Ni and minor carbonate adjacent to and below the oxycline. These microbes also formed kremydilites, oblate structures that resemble manganese stromatolites, within the biomass and produced CH4 and/or H2 gas bubbles. During early diagenesis, wormlike organisms inhabited the biomass and probably separated iron from manganese to produce cryptomelane microbialites, which agglutinated to form manganese micronodules that coalesced to form the massive layer Mn-2. This process ended with the disappearance of microorganisms and the sedimentation of the IFs, and a new water influx generated layer Mn-3 via the same process. The final seawater upwelling precipitated IFs in the basin depocenter, whereas limestone from the Tamengo Formation was deposited along the basin’s edges. The diagenesis initially transformed the manganese oxides into cryptomelane and then into hollandite.
ISSN: 0169-1368

hal-01684668
https://hal.archives-ouvertes.fr/hal-01684668
DOI : 10.1016/j.oregeorev.2017.09.018

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
Both flow field heterogeneity and mass transfer between mobile and immobile domains have been studied separately for explaining observed anomalous transport. Here we investigate non-Fickian transport using high-resolution 3-D X-ray microtomographic images of Berea sandstone containing microporous cement with pore size below the setup resolution. Transport is computed for a set of representative elementary volumes and results from advection and diffusion in the resolved macroporosity (mobile domain) and diffusion in the microporous phase (immobile domain) where the effective diffusion coefficient is calculated from the measured local porosity using a phenomenological model that includes a porosity threshold ( inline image) below which diffusion is null and the exponent n that characterizes tortuosity-porosity power-law relationship. We show that both flow field heterogeneity and microporosity trigger anomalous transport. Breakthrough curve (BTC) tailing is positively correlated to microporosity volume and mobile-immobile interface area. The sensitivity analysis showed that the BTC tailing increases with the value of inline image, due to the increase of the diffusion path tortuosity until the volume of the microporosity becomes negligible. Furthermore, increasing the value of n leads to an increase in the standard deviation of the distribution of effective diffusion coefficients, which in turn results in an increase of the BTC tailing. Finally, we propose a continuous time random walk upscaled model where the transition time is the sum of independently distributed random variables characterized by specific distributions. It allows modeling a 1-D equivalent macroscopic transport honoring both the control of the flow field heterogeneity and the multirate mass transfer between mobile and immobile domains.
ISSN: 0043-1397

hal-01278285
https://hal.archives-ouvertes.fr/hal-01278285
DOI : 10.1002/2015WR017645

Éditeur(s) : HAL CCSD Geological Society of London
Résumé : Permo-Triassic rift basins offer important hydrocarbon targets along the Atlantic margins. Their fill is dominated by continental red beds, comprising braided fluvial, alluvial fan, aeolian, floodplain and lacustrine facies. These relatively lightly explored basins span both the Atlantic and Tethyan domains and developed above a complex basement with inherited structural fabrics. Sparse data in offshore regions constrain understanding of depositional geometries and sedimentary architecture, further impeded by their deep burial beneath younger strata, combined with the effects of later deformation during continental breakup. This paper provides results from a multidisciplinary analysis of basins along the Atlantic margin. Regional seismic and well data, combined with geochemical provenance analysis from the European North Atlantic margins, are integrated with detailed outcrop studies in Morocco and Nova Scotia. The research provides new insights into regional basin tectonostratigraphic evolution, sediment fill, and reservoir distribution, architecture and quality at a range of scales. Regional seismic profiles, supported by key well data, indicate the presence of post-orogenic collapse basins, focused narrow rifts and low-magnitude multiple extensional depocentres. Significantly, Permo-Triassic basin geometries are different and more varied than the overlying Jurassic and younger basins. Provenance analysis using Pb isotopic composition of detrital K-feldspar yields new and robust controls on the sediment dispersal patterns of Triassic sandstones in the NE Atlantic margin. The evolving sedimentary architecture is characterized by detailed sedimentological studies of key outcrops of age equivalent Permian-Triassic rifts in Morocco and Nova Scotia. The interplay of tectonics and climate is observed to influence sedimentation, which has significant implications for reservoir distribution in analogue basins. New digital outcrop techniques are providing improved reservoir models, and identification of key marker horizons and sequence boundaries offers a potential subsurface correlation tool. Future work will address source and seal distribution within the potentially petroliferous basins.
Petroleum Geology: From Mature Basins to New Frontiers Proceedings of the 7th Petroleum Geology Conf

hal-00590618
https://hal.archives-ouvertes.fr/hal-00590618

Éditeur(s) : HAL CCSD Elsevier Elsevier Masson
Résumé : New field and micropalaeontological investigations have been conducted in four of the Pliocene rias of the internal zone of the Rif in Morocco, on the southern margin of the Alboran Sea. We found that marine sediments outcropping in these rias were deposited mainly during the Early Zanclean, between 5.04 and 3.8 Ma. After a transgressive episode that led to the deposition of terrestrial to marine conglomerates, dark clays deposited first at shallow palaeo-depths and then at bathyal palaeo-depths. The rias were then infilled with a shallowing upward succession comprising marine clays and sandstone and, locally, terrestrial sediments that indicate their final emersion. No Gilbert-deltas were observed in these rias. The presence of transgressive deposits at the bottom of the rias, also identified in other basins of the external zone of the Rif, and the absence of Gilbert deltas question a catastrophic reflooding after the Messinian Salinity Crisis in this area.
ISSN: 1631-0713

hal-01115243
https://hal.archives-ouvertes.fr/hal-01115243
DOI : 10.1016/j.crte.2014.03.002

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
From outcrops located in Provence (South-East France), we describe the distribution, the microstructures, and the petrophysical properties of deformation band networks related to both contractional and extensional tectonic events. In contraction, pervasively distributed networks of reverse-sense compactional shear bands are observed in all folded sand units of the foreland, whereas localized networks of clustered reverse-sense shear bands are only observed close to a large-scale thrust. In extensional setting, networks of clustered normal-sense shear bands are generally observed adjacent to map-scale faults (100 m–10 km scale), although some randomly distributed bands are also observed between these faults. Normal-sense cataclastic faults, i.e. zone of deformation bands containing a localized slip-surface, are also observed to be restricted to sand units, suggesting that faults initiated in the sands during extension, but not during contraction. Shear bands and faults show cataclastic microstructures with high-permeability reduction whereas compactional shear bands show crush microbreccia or protocataclastic microstructures with moderate permeability reduction. This basin-scale analysis underlines the major role of tectonic settings (thrust-fault versus normal-fault andersonian-stress regime) and the influence of inherited large-scale faults on the formation/localization of low-permeability shear bands. We also provide a geometrical analysis of the band network properties (spacing, thickness, shear/compaction ratio, degree of cataclasis, petrophysical properties) with respect to the median grain size, porosity and grain sorting of host sand. This analysis suggests that grain size, although less important than stress-state conditions and the presence of large-scale faults, has a non-negligible effect on band network geometry. No correlations are observed between the grain sorting, porosity and band network geometry.
ISSN: 0264-8172

hal-01116421
https://hal.archives-ouvertes.fr/hal-01116421
DOI : 10.1016/j.marpetgeo.2013.12.020