Éditeur(s) : HAL CCSD
Résumé : International audience
The extraction of knowledge from social networks is an area that has experienced significant growth in recent years. Indeed, thanks to the improvement of storage and calculation capacities, and the heterogeneity of data that can currently be extracted, much effort has been made to go beyond traditional knowledge, by proposing new kinds of patterns that take into account the context. However, while many works were interested in designing new patterns of knowledge or in optimizing existing approaches, few studies have been focused in merging patterns and on the useful knowledge emerging from such fusions. In this work, we focus on two network clustering approaches, able to extract two distinct kinds of patterns, and we seek to understand both the intersections that can exist between them and the knowledge that emerges from their fusion. The first is the classical nodes clustering approach that consists in searching for communities into a network. The second is the search for frequent conceptual links, a new link clustering approach that aims identifying frequent links between groups of nodes sharing common attributes. We propose a set of original measures that aim to evaluate the amount of shared information between these patterns when they are extracted from a same network. These measures are applied to three datasets and demonstrate the interest in simultaneously considering several sources of knowledge.
Advances in Knowledge Discovery and Management (AKDM)

hal-01514227
https://hal.archives-ouvertes.fr/hal-01514227
DOI : 10.1007/978-3-319-45763-5_13

Éditeur(s) : HAL CCSD
Résumé : International audience
In this paper, we investigate image segmentation by region merging. Given any similarity measure between regions , satisfying some weak constraints, we give a general predicate for answering if two regions are to be merged or not during the segmentation process. Our predicate is generic and has six properties. The first one is its inde-pendance with respect to the similarity measure, that leads to a user-independant and adaptative predicate. Second, it is non-parametric, and does not rely on any assumption concerning the image. Third, due to its weak constraints, knowledge may be included in the predicate to fit better to the user's behaviour. Fourth, provided the similarity is well-chosen by the user, we are able to upperbound one type of error made during the image segmentation. Fifth, it does not rely on a particular segmentation algorithm and can be used with almost all region-merging algorithms in various application domains. Sixth, it is calculated quickly, and can lead with appropriated algorithms to very efficient segmentation.
10th IEEE International Conference on Tools with Artificial Intelligence
Taipei, Taiwan

lirmm-01168371
https://hal-lirmm.ccsd.cnrs.fr/lirmm-01168371
https://hal-lirmm.ccsd.cnrs.fr/lirmm-01168371/document
https://hal-lirmm.ccsd.cnrs.fr/lirmm-01168371/file/FioNocICTAI98_Image%20Segmentation%20Using.pdf
DOI : 10.1109/TAI.1998.744885

Éditeur(s) : HAL CCSD
Résumé : International audience
A key element of the biomechanical design of trees is their ability to generate largemechanical stresses in wood at the stem periphery. This function is necessary for the tree tocontrol the orientation of its axes, and therefore to grow in height, maintain its branches at anoptimal angle or achieve adaptive reorientations (Fournier et al., 2013). This “maturationstress” appears in wood fibres during their cellular maturation when their secondary cell wallis thickening. In hardwoods, the stress asymmetry is generated by the formation of specificfibres with a very high tensile growth stress on the upper side of the inclined axis. Theresulting tension wood has microstructural features highly different from the normal wood.Tension wood in almost all temperate species has a specific gelatinous cell wall layer, calledG-layer, that is not lignified and highly mesoporous (Chang et al., 2015). It has been shownrecently, at the macroscopic scale, that cellulose tension appears during maturation and issynchronous with the development of this specific layer (Clair et al., 2011). Tropical species,like simarouba, are able to generate lignified tension wood fibres. The mechanisms of stressgeneration in tension wood fibres are not yet well known. The aim of our study is tounderstand these mechanisms and to know the spatial and temporal kinetics of the differentcell wall layers stiffening during maturation, in parallel with tensile stress generation.Contact-Resonance Atomic Force Microscopy, CR-AFM, was used here to address thisquestion on embedded samples (Arnould and Arinero, 2015) using dual resonance frequencytracking (DRFT, Rodriguez et al., 2007). Change in the contact modulus between, and within,each layer of the cell wall has been measured on several radial lines of developing fibres atdifferent steps. In order to understand the obtained results, and to estimate the sensitivity ofthe AFM indentation-like technique to the different cell wall components stiffness, an elasticanisotropic indentation model was used (Vlassak et al., 2003; Jäger et al., 2011). Finally,these mechanical measurements have been compared to topochemical data obtained on thesame fibres.
8th Plant Biomechanics International Conference
Nagoya, Japan

hal-01436113
https://hal.archives-ouvertes.fr/hal-01436113

Éditeur(s) : Université de Bretagne Occidentale
Résumé : The negative impact of the man on the environment unquestionably increases. The coastal environment as a whole is the maritime environment which is the most exposed to man-made eutrophication. For instance, nitrate loads to coastal waters off Brittany (France) have increased 10 times (from 3 to s 30mg L-1NO3) during the four last decades. Eutrophication of this coastal zone is now a recurrent problem, more and more worrying. This eutrophication exhibits two main forms : " green tides ", which are caused by local proliferations and stranding of green macro-algae (particularly the Ulva species) in nitrogen-enriched areas ; phytoplanktonic blooms, which are responsible for coloured water events, toxic species can be present (Pseudo-Nitzschia, Alexandrium, Dinophysis), and induce banning of shellfish consumption. The objectives of this study are to assess the respective role of various rivers (especially the Loire and the Vilaine) in the eutrophication of the Brittany shelf ecosystem and test the impact of nitrogen enrichment in the triggering of Pseudo-Nitzchia toxicity. For these purposes, a coupled hydrodynamical/ biogeochemical 3D model has been developed and validated against past measured time-series and satellite images. After a brief analysis of primary production over the Brittany shelf under different conditions, we show a description of the real time adaptation of this model. Daily results are currently presented in real time on www.previmer.org web site. The inability of the model to correctly simulate near shore phytoplankton is worsened in this model by the fact that the turbidity field used is a climatological one, made by satellite images averaged on a decadal basis. First, near shore pixels of satellite images are scarcely reliable, secondly a climatological mean cannot represent the sudden bursts or drops of the real turbidity, highly dependent on the actual sea-state : this can explain also why the model at this moment fails to reproduce a sudden bloom occurring in a short period of sunny and calm weather. The simulated Pseudo-Nitzschia biomass and induced risk of toxicity in the water column cannot really be validated offshore, because monitoring measurements are available only near the coast, and deal only with toxicity in benthic filter feeders. To get temporarily rid of that problem, an interesting improvement would be to add to the operational model the bio-accumulation of toxin in the shellfishes : simulated concentrations in shellfish fresh would become directly comparable with usual measurements of the monitoring networks. Our model points out the important impact of Loire river loads on the primary production on the western and southern Brittany. This result is crucial for administrations in charge of reducing the terrestrial loadings responsible for eutrophication, because it can delay reduction programs on small tributaries until the main input from the Loire has been significantly reduced. A question arises, about the reliability of the haline stratification in the model, because the horizontal extent of the Loire plume will be enhanced by a stronger stratification.
L'eutrophisation des milieux marins côtiers, de plus en plus importante, représente un des impacts majeurs des activités humaines sur l'environnement. Les phénomènes d'eutrophisation sont en constante augmentation ; ces dernières décennies ont vu le nombre de sites touchés augmenter de par le monde. La bande côtière bretonne est particulièrement concernée par ce phénomène. L'eutrophisation s'y manifeste de deux façons : "Des phénomènes de marée vertes, très localisées, qui sont provoqués par la croissance excessive et l'échouage de macro-algues du genre Ulva dans ces zones riches en azote ; Des blooms de phytoplancton à l'origine des phénomènes d'eaux colorées, qui peuvent aussi provoquer des interdictions de consommation de coquillages lorsque les espèces mises en jeu sont toxiques (Pseudo-Nitzschia, Alexandrium, Dinophysis). L'objectif de ce travail est multiple : il vise à mettre en évidence et à comprendre l'impact et le rôle des apports en nutriments sur la production primaire et l'eutrophisation des milieux côtiers. Ce travail a aussi pour ambition l'identification et la compréhension des causes des phénomènes d'eutrophisation et permettre ainsi d'apporter des solutions ou des pistes d'amélioration. En n, il a aussi un objectif de prévision à court terme de l'état biologique sur la zone. Pour atteindre ces objectifs, un modèle en temps réel a été mis en oeuvre. Les résultats de simulations numériques et de mesures satellitaires sont présentés sur internet : www.previmer.org. L'outil principal de ce travail est un modèle couplé physique/biogéochimie. La partie hydrodynamique est fournie par le code Mars3D (3D hydrodynamical Model for Application at Regional Scale) développé à IFREMER. Au code hydrodynamique Mars3D est couplé le modèle des cycles de l'azote, du phosphore et du silicium d'IFREMER. Le modèle couplé permet de simuler en 3 dimensions et de manière dynamique les courants, le brassage horizontal et vertical, les champs de température et de salinité, mais aussi les principaux cycles de nutriments, reproduisant ainsi les conditions déterminantes de la production primaire. La croissance des algues est modélisée, et nous permet de voir l'influence des panaches de dilution des principales rivières bretonnes sur leur croissance. Les diffcultés du modèle à correctement simuler les concentrations en phytoplancton près des zones côtières, sont probablement dues à l'utilisation d'une climatologie de concentration en matière en suspension fondée sur des données satellitaires. Tout d'abord, les pixels côtiers des images satellitaires sont entachés d'erreurs, ensuite une climatologie n'est pas capable de représenter les apports soudains des fleuves lors des crues. Cela peut expliquer l'incapacité du modèle a représenter certains blooms liés à des périodes ensoleilées et calmes. A ce modèle de base nous avons ajouté un genre spécifique de phytoplancton : le genre Pseudo-Nitzschia. Certaines espèces de Pseudo-Nitzschia sont réputées toxiques. En effet, ce phytoplancton a la capacité de synthétiser une toxine : l'acide domoïque. Cette toxine est responsable du syndrome ASP (Amnesic Shellfish Poisoning). Le modèle reproduit globalement les mêmes zones de toxicité que les mesures du REPHY, et donne des résultats encourageants. L'étude montre que la Loire influence une large partie de la bande côtière bretonne ; son panache remonte jusqu'au nord de la mer d'Iroise, et contribue pour une grande part à l'enrichissement du sud et de l'ouest de la Bretagne. Le traçage de l'azote en provenance de la Loire au sein des cycles biogéochimiques nous a permis de quantifier cet enrichissement.

Droits : info:eu-repo/semantics/openAccess
http://archimer.ifremer.fr/doc/00015/12603/9481.pdf
http://archimer.ifremer.fr/doc/00015/12603/

Éditeur(s) : HAL CCSD Springer
Résumé : International audience
Thiswork examines the relevance of the inclusion of ground-based gravity data in the calibration process of a global rainfall-discharge reservoir model. The analysis is performed for the Durzon karst system (Larzac, France). The first part of the study focuses on the hydrological interpretation of the ground-based gravity measurements. The second part of the study investigates further the information content of the gravity data with respect to water storage dynamics modelling.The gravity-derived information is found unable to either reduce equifinality of the single-objective, dischargebased model calibration process or enhance model performance through assimilation.
ISSN: 1866-6280

hal-00812624
https://hal-brgm.archives-ouvertes.fr/hal-00812624
DOI : 10.1007/s12665-012-1856-z

Éditeur(s) : HAL CCSD
Résumé : International audience
Spermatogenesis is a highly sophisticated process involved in the transmission of genetic heritage. It includes halving ploidy, repackaging of the chromatin for transport, and the equipment of developing spermatids and eventually spermatozoa with the advanced apparatus (e.g., tightly packed mitochondrial sheat in the mid piece, elongating of the tail, reduction of cytoplasmic volume) to elicit motility once they reach the epididymis. Mammalian spermatogenesis is divided into three phases. In the first the primitive germ cells or spermatogonia undergo a series of mitotic divisions. In the second the spermatocytes undergo two consecutive divisions in meiosis to produce haploid spermatids. In the third the spermatids differentiate into spermatozoa in a process called spermiogenesis. Paracrine, autocrine, juxtacrine, and endocrine pathways all contribute to the regulation of the process. The array of structural elements and chemical factors modulating somatic and germ cell activity is such that the network linking the various cellular activities during spermatogenesis is unimaginably complex. Over the past two decades, advances in genomics have greatly improved our knowledge of spermatogenesis, by identifying numerous genes essential for the development of functional male gametes. Large-scale analyses of testicular function have deepened our insight into normal and pathological spermatogenesis. Progress in genome sequencing and microarray technology have been exploited for genome-wide expression studies, leading to the identification of hundreds of genes differentially expressed within the testis. However, although proteomics has now come of age, the proteomics-based investigation of spermatogenesis remains in its infancy. Here, we review the state-of-the-art of large-scale proteomic analyses of spermatogenesis, from germ cell development during sex determination to spermatogenesis in the adult. Indeed, a few laboratories have undertaken differential protein profiling expression studies and/or systematic analyses of testicular proteomes in entire organs or isolated cells from various species. We consider the pros and cons of proteomics for studying the testicular germ cell gene expression program. Finally, we address the use of protein datasets, through integrative genomics (i.e., combining genomics, transcriptomics, and proteomics), bioinformatics, and modelling.
Systems Biology in Reproductive Medicine

hal-00877749
https://hal.archives-ouvertes.fr/hal-00877749
DOI : 10.3109/19396368.2012.691943
PUBMED : 22788530

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The Souttoufide belt is situated between the High-Atlas in the north, the Mauritanides in the south and the West African Craton as well as the Tindouf basin in the east. Thus, this belt is a part of the West African fold belt system which surrounds the West African Craton. Outcrops occur only in three areas, while the rest of the Souttoufide belt is covered by Meso- to Cenozoic sediments. These areas are, from the south to the north, the Adrar Souttouf Massif, the Smara Zemmour area, and the western part of the Anti-Atlas. Because of the continuing processing and numerous publications, the Anti-Atlas cannot be dealt with in detail. Fundamental geological work in both of the other areas was mainly done during the second third of the 20th century, followed by several decades of inactivity. Numerous studies were done in the Adrar Souttouf massif during the last decade, while the Smara-Zemmour area still remains poorly investigated. Most of them were focused on geochronological analyses and geochemistry. Accordingly, the obtained data led to a new interpretation. The Adrar Souttouf is interpreted as a Pan-African belt exhibiting a Neoproterozoic island arc reworked by the Variscan collision between the North American Craton (NAC) and the West African Craton (WAC). The Smara-Zemmour area is considered as the external part of this Variscan belt thrusted onto the Palaeozoic Tindouf basin. The western Anti-Atlas as considered as a Pan-African active margin reworked during the Variscan orogen. Together, these three areas, lead to the hypothesis of a Late Pan-African belt capped by the Early and Middle Palaeozoic covers and then affected by the Middle Carboniferous tectonic event (330 Ma) related to the Pangaean assembly. Correlations with adjacent belts (Mauritanides and Anti-Atlas) are considered.
ISSN: 0899-5362

hal-01382815
https://hal.archives-ouvertes.fr/hal-01382815
DOI : 10.1016/j.jafrearsci.2015.04.016

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
IODP Hole U1309D (Atlantis Massif, Mid-Atlantic Ridge 30 degrees N) is the second deepest hole drilled into slow spread gabbroic lithosphere. It comprises 5.4% of olivine-rich troctolites (->70% olivine), possibly the most primitive gabbroic rocks ever drilled at mid-ocean ridges. We present the result of an in situ trace element study carried out on a series of olivine-rich troctolites, and neighbouring troctolites and gabbros, from olivine-rich intervals in Hole U1309D. Olivine-rich troctolites display poilkilitic textures; coarse-grained subhedral to medium-grained rounded olivine crystals are included into large undeformed clinopyroxene and plagioclase poikiloblasts. In contrast, gabbros and troctolites have irregularly seriate textures, with highly variable grain sizes, and locally poikilitic clinopyroxene oikocrysts in troctolites. Clinopyroxene is high Mg# augite (Mg# 87 in olivine-rich troctolites to 82 in gabbros), and plagioclase has anorthite contents ranging from 77 in olivine-rich troctolites to 68 in gabbros. Olivine has high forsterite contents (82-88 in olivine-rich troctolites, to 78-83 in gabbros) and is in Mg-Fe equilibrium with clinopyroxene. Clinopyroxene cores and plagioclase are depleted in trace elements (e.g., Yb-cpx similar to 5-11 x Chondrite), they are in equilibrium with the same MORB-type melt in all studied rock-types. These compositions are not consistent with the progressively more trace element enriched (evolved) compositions expected from olivine rich primitive products to gabbros in a MORB cumulate sequence. They indicate that clinopyroxene and plagioclase crystallized concurrently, after melts having the same trace element composition, consistent with crystallization in an open system with a buffered magma composition. The slight trace element enrichments and lower Cr contents observed in clinopyroxene rims and interstitial grains results from crystallization of late-stage differentiated melts, probably indicating the closure of the magmatic system. In contrast to clinopyroxene and plagioclase, olivine is not in equilibrium with MORB, but with a highly fractionated depleted melt, similar to that in equilibrium with refractory oceanic peridotites, thus possibly indicating a mantle origin. In addition, textural relationships suggest that olivine was in part assimilated by the basaltic melts after which clinopyroxene and plagioclase crystallized (impregnation). These observations suggest a complex crystallization history in an open system involving impregnation by MORB-type melt(s) of an olivine-rich rock or mush. The documented magmatic processes suggest that olivine-rich troctolites were formed in a zone with large magmatic transfer and accumulation, similar to the mantle-crust transition zone documented in ophiolites and at fast spreading ridges.
ISSN: 0009-2541

hal-00420916
https://hal.archives-ouvertes.fr/hal-00420916
DOI : 10.1016/j.chemgeo.2009.02.013

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Large sand intrusions often exhibit conical morphologies analogous to magmatic intrusions such as saucer-shaped or cup-shaped sills. Whereas some physical processes may be similar, we show with scaled experiments that the formation of conical sand intrusions may be favoured by the pore-pressure gradients prevailing in the host rock before sand injection. Our experiments involve injecting air into a permeable and cohesive analogue material to produce hydraulic fractures while controlling the pore pressure field. We control the state of overpressure in the overburden by applying homogeneous basal pore pressure, and then adding a second local pore pressure field by injecting air via a central injector to initiate hydraulic fractures near the injection point. In experiments involving small vertical effective stresses (small overburden, or high pore fluid overpressure), the fracturing pressure (lambda(fract)) is supralithostatic and two dipping fractures are initiated at the injection point forming a conical structure. From theoretical considerations, we predict that high values of lambda(fract), are due to strong cohesion or high pore fluid overpressure distributed in the overburden. Such conditions are favoured by the pore pressure/stress coupling induced by both pore pressure fields. The dips of cones can be accounted for elastic-stress rotation occurring around the source. Contrary to magmatic chamber models, the aqueous fluid overpressure developed in a parent sandbody (and prevailing before the formation of injectites) may diffuse into the surrounding overburden, thus favouring stress rotation and the formation of inclined sheets far from the parent source. For experiments involving higher vertical effective stresses (thick overburden or low pore fluid overpressure), the fracturing pressure is lower than the lithostatic stress, and a single fracture is opened in mode I which then grows vertically. At a critical depth, the fracture separates into two dilatant branches forming a flat cone. We make use of a P.I.V. (Particle Imaging Velocimetiy) technique to analyse plastic deformation, showing that these inclined fractures are opened in mixed modes. Close to the surface, they change into steep shear bands where fluids can infiltrate. The final morphology of the fracture network is very similar to the common tripartite architecture of various injection complexes, indicating that different mechanisms may be involved in the formation of dykes. Feeder dykes under the sill zones may open as tensile fractures, while overlying dykes may be guided by the deformation induced by the growth of sills. These deformation conditions may also favour the formation of fluid escape structures and pockmarks. (C) 2011 Elsevier B.V. All rights reserved.
ISSN: 0012-821X

hal-00745640
https://hal.archives-ouvertes.fr/hal-00745640
DOI : 10.1016/j.epsl.2011.10.029

Éditeur(s) : HAL CCSD Elsevier
Résumé : The relationship between deformation and so-called fluid paleotransfers in minor faults has been analysed in an argillaceous formation located in the Causses Basin in France. The fluid paleotransfers are related to the fault activity to a large extent. We attempt to estimate the intensity of paleo-deviatoric stress magnitudes under which the fault activity may have occurred and consequently, the change in the structural fault permeability. The paleo-deviatoric stress magnitudes were calculated with the inverse method of Etchecopar applied to calcite twinning. The measured crystals are contained within the core zone of minor faults and this study is based on a previous complete microtectonic and microstructural analysis of the faults. In this paper, analysis of calcite twinning has been applied for the first time to vein fillings associated small faults in a context of relatively weak deformation, a condition ensured by the tectonic and structural analysis. Calculation and discussion of the paleo-deviatoric stress tensors in relation to the evolution of the structural fault permeability and to the hydraulic behaviour of the faults are the aim of this paper. The analysed faults, created and active during the same tectonic event, were permeable under a (;σ;1;–;σ;3;) mean value of 40–50 MPa. On the other hand, the reactivation of faults during a second tectonic event implies mean (;σ;1;–;σ;3;) value higher than 40–50 MPa, especially for the faults that are poorly oriented with respect to the principal tectonic stress directions. The core zone of these faults remained sealed and impermeable or became permeable by development of microcracks inside the pre-existing fillings.
ISSN: 0040-1951

hal-00407577
https://hal.archives-ouvertes.fr/hal-00407577
DOI : 10.1016/j.tecto.2006.09.014

Éditeur(s) : HAL CCSD
Résumé : International audience
Identifying the writer of a document establishes its authenticity or authorship and has several applications, notably in forensic and historical document analysis. Previous research has shown the potential of Interest Points (IP) for writer identification, but existing methods require segmentation or training. This paper evaluates the performance of intuitive features computed directly from IP properties rather than extracting descriptors at their locations; allowing for a training-free approach. Secondly, we show that adapting detectors to the specific task of writer identification is not only vital for performance but also allows for segmentation-free approaches. Experiments on widely-used datasets show the potential of the method applied self-contained and when combined with existing methods. Limitations of our method relate to the amount of data needed in order to obtain reliable models.
17th Biennial Conference of the International Graphonomics Society
Pointe-à-Pitre, Guadeloupe

hal-01165881
https://hal.univ-antilles.fr/hal-01165881
https://hal.univ-antilles.fr/hal-01165881/document
https://hal.univ-antilles.fr/hal-01165881/file/IGS_2015_submission_15.pdf

Éditeur(s) : HAL CCSD University of Uludag
Résumé : International audience
We tested whether the silicone swim caps (SC) worn by young swimmers in a tropical climate negatively influence aerobic performance. Nine trained pre-adolescents [11.8 (± 0.8) years] swam randomized 800-m trials (water: 32.9°C, outdoors: shade, 29.2 ± 0.2 °C, 74 ± 0.3 % rh) with a SC or a nude head (NH). Performance times and heart rate (HR) were monitored continuously. Rectal temperature (T rec) was measured before and after trials. The rating of perceived exertion (RPE) was assessed. Stroke frequency (SF), stroke length (SL) and stroke index (SI) were measured every 50-m. The SC trial was significantly longer than NH (799 ± 16 and 781 ± 16 seconds, respectively). Mean delta T rec was significantly greater in SC (0.2 ± 0.1°C vs.-0.1 ± 0.1°C in SC vs. NH), mean SI was significantly different in SC versus NH (1.83 ± 0.07 vs 1.73 ± 0.06); but RPE and mean HR, SF and SL showed no change. We conclude that a silicone swim cap worn in tropical environment significantly decreased 800-m crawl performance without affecting HR or RPE. Silicone swim caps worn by young swimmers in a tropical environment may also have negative effects on training capacity.
ISSN: 1303-2968

hal-01143533
https://hal.univ-antilles.fr/hal-01143533

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The Parentis and Arzacq-Mauleon basins located in front of the V-shaped oceanic propagator in the Bay of Biscay present evidence for extreme crustal thinning. In this paper we investigate the 3D structure of these rift basins, based on field observations and the interpretation of seismic data. We compare these results with those obtained from two different and independent inversion methods: first a 3D gravity inversion and second the standard Euler deconvolution.;For the Mauleon Basin our results show that the positive gravimetric anomaly identified above its southern margin is the consequence of two shallower high density bodies that are separated by the Pamplona fault and a deeper high density body. The high density bodies can be explained by the presence of mid-crustal and mantle rocks that were exhumed or uplifted at shallower depth during Early Cretaceous rifting before they were reworked and integrated to the Pyrenean chain during compression phase. Also, during this reactivation phase, some slices of the exhumed mid-crustal and mantle rocks were sheared off and were integrated in the present-day thrust belt in the Mauleon basin. For the Parentis Basin we can demonstrate, based on seismic data and gravimetric inversion methods, a decrease in extension from west to east, which is compatible with the V-shape geometry of the overall basin. Along strike, a change in the fault geometry from downward concave top-basement detachment faults to upward concave high-angle faults can be observed eastwards, i.e. towards the termination of the basin. A key structure, controlling the evolution of the Parentis Basin, is the east-west trending Ibis fault. We interpret this fault to have initially formed as a strike slip fault before it was reactivated during later crustal thinning. At present, it forms the limit between an upper plate sag basin to the north and a lower plate sag basin, floored at least locally by a top-basement detachment faults to the south. The strong asymmetry of the basin is supported by the shape of the basin and the results of standard Euler deconvolution.
ISSN: 0040-1951

hal-00523444
https://hal.archives-ouvertes.fr/hal-00523444
DOI : 10.1016/j.tecto.2010.04.023

Éditeur(s) : Elsevier
Résumé : The effect of different levels of dissolved oxygen (DO) and a decreased temperature combined with severe hypoxia were studied in the blue shrimp Litopenaeus stylirostris in relation to molt stage. In the first experiment, shrimps were submitted to DO concentrations of 5 to 1 mg l(-1). Osmoregulatory capacity (OC) was measured in shrimps at molt stage C after 6, 24, or 48 h of exposure. No mortality was recorded but a significant negative effect of DO concentration on hypo-OC was observed for DO concentrations below 3 mg l(-1). Osmoregulation improved after 48 h exposure, compared to 6 and 24 h exposure. In a second experiment, temperature was decreased from 28 to 22 degreesC in 24 h, before a severe hypoxia of 0.5+/-0.1 mg O-2 l(-1) was applied. Mortality and OC were studied in relation to molt stages. Half of the shrimps died after respectively 100 min at 0.5 mg O-2 l(-1) at 28 degreesC and 153 min at 0.4 mg O-2 l(-1) at 22degreesC. Mortality was significantly higher in stages D-2 and B compared to stages C and Do. Control shrimps in stage D2 had a lower hypo-OC than shrimps in stages C and Do both at 28 and 22 degreesC. Temperature decrease had no effect on hypo-OC. Hypoxia reduced hypo-OC for all stages, whatever the temperature, but the effect was greater in stage C at 27 degreesC (68% decrease) compared to 22 degreesC (49%) and stage D-2 at both temperatures (respectively, 43% and 58% at 27 and 22 degreesC). Combination of temperature and hypoxia had a significant effect on hypo-OC. Low temperature reduced the effect of hypoxia presumably by slowing down the metabolism. Results are discussed in relation to pond observation. (C) 2004 Elsevier B.V. All rights reserved.
Aquaculture (0044-8486) (Elsevier), 2005-02 , Vol. 244 , N. 1-4 , P. 315-322

Droits : 2004 Elsevier B.V. All rights reserved.
http://archimer.ifremer.fr/doc/2005/publication-372.pdf
DOI:10.1016/j.aquaculture.2004.11.010
http://archimer.ifremer.fr/doc/00000/372/

Éditeur(s) : HAL CCSD European Geosciences Union
Résumé : International audience
The production of aboveground soft tissue represents an important share of total net primary production in tropical rain forests. Here we draw from a large number of published and unpublished datasets (n = 81 sites) to assess the determinants of litterfall variation across South American tropical forests. We show that across old-growth tropical rainforests, litterfall averages 8.61±1.91Mgha−1 yr−1 (mean±standard deviation, in dry mass units). Secondary forests have a lower annual litterfall than old-growth tropical forests with a mean of 8.01±3.41Mgha−1 yr−1. Annual litterfall shows no significant variation with total annual rainfall, either globally or within forest types. It does not vary consistently with soil type, except in the poorest soils (white sand soils), where litterfall is significantly lower than in other soil types (5.42±1.91Mgha−1 yr−1). We also study the determinants of litterfall seasonality, and find that it does not depend on annual rainfall or on soil type. However, litterfall seasonality is significantly positively correlated with rainfall seasonality. Finally, we assess how much carbon is stored in reproductive organs relative to photosynthetic organs. Mean leaf fall is 5.74±1.83Mgha−1 yr−1 (71% of total litterfall). Mean allocation into reproductive organs is 0.69±0.40Mgha−1 yr−1 (9% of total litterfall). The investment into reproductive organs divided by leaf litterfall increases with soil fertility, suggesting that on poor soils, the allocation to photosynthetic organs is prioritized over that to reproduction. Finally, we discuss the ecological and biogeochemical implications of these results.
ISSN: 1726-4170

hal-00594514
https://hal.archives-ouvertes.fr/hal-00594514

Éditeur(s) : HAL CCSD
Résumé : International audience
Treatment failure and symptomatic relapse are major concerns in American tegumentary leishmaniasis (ATL). Such complications are seen frequently in L.guyanensis infections where patients respond variously to first-line anti-leishmanials and are more prone to develop chronic cutaneous leishmaniasis. The factors underlying this pathology, however, are unknown. Recently ,: we reported that a dsRNA virus (LRV1) nested within L.guyanensis parasites is able to exacerbate experimental murine leishmaniasis by inducing a hyper-inflammatory response. This report investigates the prevalence of LRV1 in human L.guyanensis infection and its effect on treatment efficacy as well as its correlation to symptomatic relapses after the first-line treatment. In our cohort of 75 patients diagnosed with primary-localised ATL, the prevalence of LRV1+ infection was elevated to 58%. All patients infected with LRV1-negative L.guyanensis were cured after one (22/31 i.e.71%) or two (31/31 i.e.100%) doses of pentamidine. Oppositely, 12 out of the 44 LRV1-positive patients presented with persistent infection and symptomatic relapse required extended therapy and the use of second-line drugs. Finally, LRV1 presence was associated with a significant increase in intra-lesional inflammatory markers. In conclusion, LRV1 status in L.guyanensis infection is significantly predictive (p=0.0009) of first-line treatment failure and symptomatic relapse, and could stand to guide therapeutic choices in ATL
Journal of Infectious Diseases

hal-01175528
https://hal-univ-rennes1.archives-ouvertes.fr/hal-01175528
DOI : 10.1093/infdis/jiv355
PUBMED : 26123564

Éditeur(s) : HAL CCSD Springer-Verlag Berlin Heidelberg
Résumé : International audience
The main biological function of reaction wood is to act as " muscle " for trees, enabling them to control their posture. The key property to achieve this function is the development of high mechanical stress during the formation of reaction wood cells, called " maturation strains ". Actually, reaction wood formation is basically the asymmetric formation of wood around the tree circumference, with higher maturation strains on the side where reaction wood is formed than on the opposite side. This asymmetry enables stems to bend upward or to compensate for the downward bending induced by gravity. At the cross section level, the performance in this biological function is linked not only to the magnitude of this asymmetry but also to an effect of the cross-sectional size (diameter) of the stem. Eccentric growth and variations in wood mechanical stiffness are second order effects that can modify this performance. Differences in maturation strains between reaction and non-reaction woods are related to their specific cell wall structure and composition. The swelling of the cell wall matrix during maturation and the effect of microfibril angle explain the differences in maturation strains between normal and compression wood. However, this mechanism fails in explaining the high maturation shrinkage of tension wood, and several hypotheses at the molecular levels are still under debate. How trees perceive their gravitational disequilibrium is also an open question for physiologists. Integrative biomechanical modelling (from the polymer level to the cell wall, cross section and whole tree levels) enables defining key variables that explain the performance of reaction wood as a system that insures the stem motricity. Maturation strains can be precisely measured only in recently formed wood at the tree surface, but their changes during the whole tree life can also be estimated by retrospective dendrochronological analysis through structural markers of reaction wood. Lastly, wood in living trees ensures general storage, defence, vascular and skeletal functions, that ask general questions about synergies and trade-offs as the structural characteristics of reaction wood can affect all these functions.
The Biology of Reaction Wood

ISBN : 978-3-642-10813-6
hal-01452085
https://hal.archives-ouvertes.fr/hal-01452085
https://hal.archives-ouvertes.fr/hal-01452085/document
https://hal.archives-ouvertes.fr/hal-01452085/file/Chap_Gril_al_Biomechanical_action_biological_functions_2014.pdf

Éditeur(s) : HAL CCSD
Résumé : International audience
The mathematical site of an exercise or a theorem is a useful tool which helps to organize its study, by putting into a hierarchy the various elements (substratum, objects, techniques, technologies) relevant to describe its ecosystem. These characteristics of the mathematical site turn it into a help for the pupil or student (within the framework of an evaluation in mathematics), what we show by the analysis in term of site of a subject given in the competitive ex-amination for secondary school teaching (CAPES) in mathematics. Furthermore, by revealing the organization of a mathematical concept, we show that the site can be a tool for professional training of teachers of mathematics, on the example of the characterization of a constant function on an interval by its derivative.
Le site mathématique local d’un énoncé d’exercice ou d’un théorème de cours se compose d’un système d’êtres mathématiques (objets, techniques, technologies…) et de relations, enrichis par un substrat, formé d’éléments non mathématisables dans l’institution considérée, dévoilant l’organisation de la question. Ces caractéristiques font que le site local fonctionne comme un écosystème, permettant la compréhension d’activités mathématiques de classe, d’évaluation, ce que nous montrons par l’analyse d’un dossier d’oral 2 du CAPES externe de mathématiques. Ce faisant, il devient un outil du professeur pour guider les élèves dans l’étude d’une question. De plus, comme il révèle les organisations locales en mathématiques, le site peut être utilisé comme un outil de formation professionnelle d’enseignants. Par exemple, il permet de questionner les progressions scolaires ou universitaires reçues, ce que nous discutons sur le cas de la caractérisation d’une fonction constante sur un intervalle par sa dérivée.
Repères IREM

hal-01530861
https://hal.univ-antilles.fr/hal-01530861

Éditeur(s) : HAL CCSD EDP Sciences
Résumé : International audience
Aggregation patterns are often visually detected in sets of location data. These clusters may be the result of interesting dynamics or the effect of pure randomness. We build an asymptotically Gaussian test for the hypothesis of randomness corresponding to a homogeneous Poisson point process. We first compute the exact first and second moment of the Ripley K-statistic under the homogeneous Poisson point process model. Then we prove the asymptotic normality of a vector of such statistics for different scales and compute its covariance matrix. From these results, we derive a test statistic that is chi-square distributed. By a Monte-Carlo study, we check that the test is numerically tractable even for large data sets and also correct when only a hundred of points are observed
ISSN: 1292-8100

hal-01502640
https://hal-agroparistech.archives-ouvertes.fr/hal-01502640
DOI : 10.1051/ps/2012027

Résumé : Les systèmes d'élevage des petits ruminants au pâturage sont les plus répandus en zone tropicale humide mais l'exposition aux strongles gastro-intestinaux entraîne des pertes importantes de production. L'objectif de ce travail est d'évaluer un système de gestion mixte du pâturage associant diverses espèces animales permettant à priori d'accroître les performances via la réduction du parasitisme et!ou une meilleure alimentation. L'étude de la littérature a conduit à une méta-analyse confirmant de meilleures performances individuelles ou à l'hectare pour les ovins en mixte. Préalablement un dispositif visant à vérifier la non-transmission des larves d'Haemonchus contortus des caprinsaux génisses Créoles a été validé. Un second dispositif avec des chevrettes conduites en mixte, infestées ou pas par Haemonchus comortus (Ml et MnI) ont été comparées à des chevrettes contrôles infestées ou non (CI et CnI). Ce dispositif a été conduit pendant 2 ans avec des mesures du couvert pâturé, des mesures individuelles des quantités ingérées, de la digestibilité, du parasitisme et de la croissance. De plus fortes croissances ont étéobservées en pâturage mixte que les chevrettes soient infestées ou pas (43.25 et 31.68 glj pour MDI et MI vs. 32.44 et 17.91 glj) avec une moindre biomasse. Les mesures d'ingestion et d'ingéré digéré ont été corrélées aux croissances des chevrettes contrairement aux variables parasitaires et met en évidence le rôle de l'alimentation et de la résilience dans le bénéfice du pâturage mixte. Une autre gestion intégrée du pâturage a été étudiée basée sur l'utilisation du vermicompost et s' ant sur les mêmes leviers d'action: l'alimentation et le itisme
Systems of small ruminant grazing are most prevalent in the humid tropics but this environment exposes animals to gastro-intestinal with production losses. The objective ofthis thesis is to evaluate a system ofmixed management ofthe pasture combining various animal species, which allows a priori to increase animal performance by reducing the parasitism and/or better nutrition. The study of literature bas led to a meta-analysis confirming the better individual performances or calculated per ha for sheep reared mixed. The first experiment validated the non-transmission of Iarvae ofHaemonchus contortus from goats to heifers. In a second experiment, goats mixed with heifers, infested or not with Haemonchus contortus (Ml vs MnI) were compared with controls goats, reared alone, infested or not (CI and CNI). This deviee with a continuous driving was studied for two years with measurements on the sward, individual measures of intake, digestibility, parasitism and growth ofthe goats. The highest growth rates were measured with the mixed pasture as goats are infested or not (43.25 and 31.68 g / d for MN! and MI vs. 32.44 and 17,91 g / d) with lower biomass. The herbage intake and the digested herbage intake were well correlated to the growth rate, unIike parasitic variables, and highlight the role of diet in the benefit of mixed driving for goats. Therefore, the infested goats with Haemonchus, expressed greater resilience with improved growth performance compared with controls. Parallel to the study ofmixed pasture, another integrated management of grazing was studied, based on the use of vermicompost and relying on the same levers. namelv throuzh feedinz and parasitism

http://www.theses.fr/2012AGUY0537/document