Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Seismic tomography and high surface heat flow models indicate an anomalously thin and hot lithospheric mantle beneath the Canadian Cordillera. To understand the thermal and deformational history of the lithospheric mantle under these conditions, we performed a study of the microstructures, crystal preferred orientations (CPO), and seismic anisotropy of mantle xenoliths collected in the Summit Lake volcano in the southern Canadian Cordillera. The xenoliths vary in composition between spinel lherzolites, cpx-rich lherzolites, and wehrlites. All samples are coarse-grained and show clear evidence for annealing, but deformation microstructures are well-preserved in the spinel lherzolites. Olivine CPO is characterized by a strong point-maximum of [100] and by a girdle distribution of [010[ and [001] axes normal to it; CPO strength is variable, spinel-lherzolites have the strongest CPO. Some samples show a weak orthopyroxene CPO consistent with the olivine one. However most pyroxenes have random CPO, interstitial shapes and undeformed appearance, which suggest a secondary origin by reactive melt percolation under static conditions, leading to crystallization of cpx + sp +/- opx at the expenses of olivine, followed by crystallization of cpx + sp +/- ol at the expenses of opx to produce the wehrlites. The studied xenoliths have typical upper mantle seismic properties patterns with fastest propagation of P-waves and polarization of S-waves parallel to the olivine [100] maxima. Maximum P- and S-waves anisotropy for lherzolites are 8 and 5% respectively. Dispersion of the olivine CPO due to neocrystallization of olivine results in weaker anisotropies (6.5 and 3.5%) in wehrlites. Seismic velocities calculated using a geotherm consistent with the equilibrium temperatures of the Summit Lake xenoliths are 3-4% lower than those expected in a normal, 100 km-thick lithosphere, consistent with seismic tomography models for the region. This high geothermal gradient may be partially explained by considering the anisotropy of thermal conductivity of olivine and subhorizontal foliations in the lithospheric mantle, which result in a decrease by up to 15% of the thermal conductivity in the vertical direction.
ISSN: 0040-1951

hal-00618332
https://hal.archives-ouvertes.fr/hal-00618332
DOI : 10.1016/j.tecto.2011.04.014

Éditeur(s) : ESA Publication
Résumé : Satellite remote sensing has emerged as an essential and necessary observing system to acquire global information about the state of the ocean. Complemented with in situ observing networks, the ultimate goals are to be able to make accurate estimates of selected key sets of geophysical variables, with the intention of either making operational predictions across time and spatial boundaries, or advancing fundamental knowledge through development of empirical relationships and theoretical models. For satellite oceanography, improvements are then constantly being sought in our understandings of the geophysical processes, the sensor physics, the electromagnetic and microwave properties and interactions at the complex air-sea interface. Challenges appear as unlimited as the variety of sea surface dynamics and boundary layer meteorological conditions with their broad range of spatial and temporal scales across the globe. To face these challenges, numerous efforts took places over the passed decade to build an ever-increasing quality, quantity, duration and integration of ocean observations. In parallel, simulation capabilities largely improved. All these efforts are then all critically calling for improved methodologies to better structure the wealth of information that is made readily accessible. This latter aspect is a very demanding new component for future multidisciplinary scientific research. Major innovations to consolidate sensor data repositories, to automate tailored queries, to extract, reveal and quantify relationships will then closely associate computer science developments and applied statistics with comprehensive theoretical and experimental thematic studies.
Proceedings of OceanObs'09: Sustained Ocean Observations and Information for Society (ESA Publication), 2010

Droits : info:eu-repo/semantics/openAccess
http://archimer.ifremer.fr/doc/00029/14046/11241.pdf
DOI:10.5270/OceanObs09.pp.12
http://archimer.ifremer.fr/doc/00029/14046/

Éditeur(s) : A. Ming, Jr. A. Ming, Jr. ( New York )
Résumé : (Statement of Responsibility) ornamented with plates.
This text is an abridged version of J.H. Campe's adaptation of Robinson Crusoe, except Crusoe is a native of New York. It was first published in 1810 by Thomas Powers under the title: The New Robinson Crusoe. Cf. Brigham, C.S. Bibliography of the American editions of Robinson Crusoe to 1830
Cover date: 1830.
Remainder of imprint on t.p. and cover: And sold at his book store, 280 1-2 Grand-street.
Publisher's advertisement p. <4> of cover.
Not in Brigham, NUC pre-1956, or Shoemaker.
Electronic reproduction. Gainesville, Fla. : University of Florida, George A. Smathers Libraries, 2007. (University of Florida Digital Collections) (Children's Literature) Mode of access: World Wide Web. System requirements: Internet connectivity; Web browser software. This item is presumed to be in the public domain. The University of Florida George A. Smathers Libraries respect the intellectual property rights of others and do not claim any copyright interest in this item. Users of this work have responsibility for determining copyright status prior to reusing, publishing or reproducing this item for purposes other than what is allowed by fair use or other copyright exemptions. Any reuse of this item in excess of fair use or other copyright exemptions may require permission of the copyright holder. The Smathers Libraries would like to learn more about this item and invite individuals or organizations to contact The Department of Special and Area Studies Collections (special@uflib.ufl.edu) with any additional information they can provide. University of Florida.
United States -- New York -- New York

Droits : This item is presumed to be in the public domain. The University of Florida George A. Smathers Libraries respect the intellectual property rights of others and do not claim any copyright interest in this item. Users of this work have responsibility for determining copyright status prior to reusing, publishing or reproducing this item for purposes other than what is allowed by fair use or other copyright exemptions. Any reuse of this item in excess of fair use or other copyright exemptions may require permission of the copyright holder. The Smathers Libraries would like to learn more about this item and invite individuals or organizations to contact The Department of Special and Area Studies Collections (special@uflib.ufl.edu) with any additional information they can provide.
27081393

Éditeur(s) : HAL CCSD Presses Universitaires de Louvain (distribution I6DOC/CIACO)
Résumé : In French. 10 pages, 5 figures, LaTeX 2e using EPSF and custom package taln2006.sty (designed by Pierre Zweigenbaum, ATALA). Proceedings of the 13th annual French-speaking conference on Natural Language Processing: `Traitement Automatique des Langues Naturelles' (TALN 2006), Louvain (Leuven), Belgium, 10-13 April 2003
National audience
We propose a theoretical framework within which information on the vocabulary of a given corpus can be inferred on the basis of statistical information gathered on that corpus. Inferences can be made on the categories of the words in the vocabulary, and on their syntactical properties within particular languages. Based on the same statistical data, it is possible to build matrices of syntagmatic similarity (bigram transition matrices) or paradigmatic similarity (probability for any pair of words to share common contexts). When clustered with respect to their syntagmatic similarity, words tend to group into sublanguage vocabularies, and when clustered with respect to their paradigmatic similarity, into syntactic or semantic classes. Experiments have explored the first of these two possibilities. Their results are interpreted in the frame of a Markov chain modelling of the corpus' generative processe(s): we show that the results of a spectral analysis of the transition matrix can be interpreted as probability distributions of words within clusters. This method yields a soft clustering of the vocabulary into sublanguages which contribute to the generation of heterogeneous corpora. As an application, we show how multilingual texts can be visually segmented into linguistically homogeneous segments. Our method is specifically useful in the case of related languages which happened to be mixed in corpora.
Verbum ex machina : Actes de la 13ème conférence annuelle sur le Traitement Automatique des Langues Naturelles
Louvain (Leuven), Belgium

hal-00327607
https://hal.archives-ouvertes.fr/hal-00327607
ARXIV : 0810.1212

Éditeur(s) : HAL CCSD IEEE
Résumé : International audience
Recent works display that large scale image classification problems rule out computationally demanding methods. On such problems, simple approaches like k-NN are affordable contenders, with still room space for statistical improvements under the algorithmic constraints. A recent work showed how to leverage k-NN to yield a formal boosting algorithm. This method, however, has numerical issues that make it not suited for large scale problems. We propose here an Adaptive Newton-Raphson scheme to leverage k-NN, N³, which does not suffer these issues. We show that it is a boosting algorithm, with several key algorithmic and statistical properties. In particular, it may be sufficient to boost a subsample to reach desired bounds for the loss at hand in the boosting framework. Experiments are provided on the SUN, and Caltech databases. They confirm that boosting a subsample -- sometimes containing few examples only -- is sufficient to reach the convergence regime of N³. Under such conditions, N³ challenges the accuracy of contenders with lower computational cost and lower memory requirement.
IEEE International Workshop on Machine Learning for Signal Processing
Southampton, United Kingdom

hal-00959125
https://hal.archives-ouvertes.fr/hal-00959125
https://hal.archives-ouvertes.fr/hal-00959125/document
https://hal.archives-ouvertes.fr/hal-00959125/file/BNNB_mlsp2013.pdf

Éditeur(s) : HAL CCSD Springer Verlag
Résumé : International audience
The anisotropy of vibrational properties influences the acoustic behaviour of wooden pieces and their dependence on grain angle (GA). As most pieces of wood include some GA, either for technological reasons or due to grain deviations inside trunks, predicting its repercussions would be useful. This paper aims at evaluating the variability in the anisotropy of wood vibrational properties and analysing resulting trends as a function of orientation. GA dependence is described by a model based on transformation formulas applied to complex compliances, and literature data on anisotropic vibrational properties are reviewed. Ranges of variability, as well as representative sets of viscoelastic anisotropic parameters, are defined for mean hardwoods and softwoods and for contrasted wood types. GA-dependence calculations are in close agreement with published experimental results and allow comparing the sensitivity of different woods to GA. Calculated trends in damping coefficient (tanδ) and in specific modulus of elasticity (E′/ρ) allow reconstructing the general tanδ-E′/ρ statistical relationships previously reported. Trends for woods with different mechanical parameters merge into a single curve if anisotropic ratios (both elastic and of damping) are correlated between them, and with axial properties, as is indicated by the collected data. On the other hand, varying damping coefficient independently results in parallel curves, which coincide with observations on chemically modified woods, either "artificially", or by natural extractives.
ISSN: 0043-7719

hal-00804242
https://hal.archives-ouvertes.fr/hal-00804242
https://hal.archives-ouvertes.fr/hal-00804242/document
https://hal.archives-ouvertes.fr/hal-00804242/file/Anisotropy_wood_variational_properties_Bremaud_al_2011.pdf
DOI : 10.1007/s00226-010-0393-8

Éditeur(s) : HAL CCSD Oxford University Press (OUP)
Résumé : International audience
STUDY QUESTION: Is prenatal exposure to persistent organic pollutants (POPs) associated with variations of sex hormone levels in cord blood? SUMMARY ANSWER: Prenatal exposure to a number of POPs is associated with a disruption of hormone levels in cord blood, with sex specificities. WHAT IS KNOWN ALREADY: Epidemiological studies have reported disorders of reproductive health, in relation with POPs exposure during early life and the endocrine disruption properties of these chemicals have been suggested as possible mechanisms. STUDY DESIGN, SIZE, DURATION: A subset of 282 mother-child pairs was selected from the prospective population-based PELAGIE birth cohort (n = 3421, 2002-2006, Brittany, France). Pregnant women were recruited before 19 weeks of gestation and followed until delivery. PARTICIPANTS/MATERIALS, SETTING, METHODS: Sex hormone levels including sex hormone-binding globulin (SHBG), estradiol (E2), total testosterone (T), free testosterone (fT = T/SHBG) and the aromatase index (AI = T/E2) were measured in 282 cord blood samples. Anti-Müllerian hormone (AMH) was measured in male newborns only. Pesticide concentrations of α-endosulfan, β-hexachlorocyclohexane (β-HCH), γ-HCH, dieldrin, pp'-dichlorodiphenyldichloroethylene (p,p'-DDE), hexachlorobenzene (HCB), heptachlor epoxide (HCE), as well as PCBs (congeners 153, 187 and the sum of anti-estrogenic PCBs 118, 138, and 170) and decabrominated diphenyl ether (BDE209) were also measured in cord blood. Associations between sex hormones and POPs exposure were explored using multiple linear regressions adjusted for potential confounders. MAIN RESULTS AND THE ROLE OF CHANCE: High PCB levels were associated with an increase of SHBG (P-trend extless 0.01) and AMH (P-trend extless 0.05) and a decrease of fT (P-trend extless 0.05) and AI (P-trend extless 0.01). High pesticide levels, particularly α-endosulfan and HCE, were associated with an increase of SHBG (P extless 0.05) and E2 (P extless 0.01) and a decrease of fT (P extless 0.05) and AI (P extless 0.01). Several of these associations were stronger, or specific, among male or female newborns. The associations were not altered in the sensitivity analyses. LIMITATIONS, REASONS FOR CAUTION: The study population was of relatively small sample size, and some compounds rarely detected in cord blood. The high level of correlation between POPs makes it difficult to identify the most contributing POPs. Hormone measurements were performed at birth (in cord blood) and may not adequately represent the infant endocrine system. Multiple statistical testing may have led to false-positive associations. WIDER IMPLICATIONS OF THE FINDINGS: Our results are in discordance with those reported in the only published study of the kind but in accordance with studies about prenatal exposure to other endocrine disruptors such as phthalates. These findings may help understanding the pathways involved in adverse reproductive outcomes associated with POPs exposure. STUDY FUNDING/COMPETING INTERESTS: The PELAGIE cohort is funded by Inserm, French Ministry of Health, French Ministry of Labor, InVS, ANR, ANSES, and French Ministry of Ecology. None of the authors has any competing interest to declare
ISSN: 0268-1161

hal-01220641
https://hal-univ-rennes1.archives-ouvertes.fr/hal-01220641
DOI : 10.1093/humrep/dev260
PUBMED : 26493407

Éditeur(s) : HAL CCSD IOS Press
Résumé : International audience
Little is known about the impact of blood rheology on the occurrence of retinopathy in sickle cell disease (SCD). Fifty-nine adult SCD patients in steady-state condition participated to the study: 32 with homozygous SCD (sickle cell anemia; SCA) and 27 with sickle cell hemoglobin-C disease (SCC). The patients underwent retinal examination and were categorized according to the classification of Goldberg: 1) no retinopathy (group 1), 2) non-proliferative or proliferative stage I-II retinopathy (group 2) and 3) proliferative stage III-IV-V retinopathy (group 3). Hematological and hemorheological (whole blood viscosity, RBC deformability and aggregation properties) measurements were performed for each patient. In the whole SCD group (SCA + SCC patients) and in SCC patients, the group 3 had higher platelets count than group 2 but the difference between group 3 and group 1 did not reach statistical significance. No difference was observed for the other parameters between the three groups. SCC patients from the group 3 exhibited higher whole blood viscosity than SCC patients from the group 1. No significant difference was observed between the three groups in SCA patients. This study revealed that severe sickle proliferative retinopathy is associated with blood hyperviscosity in SCC patients but not in SCA patients.
ISSN: 1386-0291

inserm-00849032
http://www.hal.inserm.fr/inserm-00849032
http://www.hal.inserm.fr/inserm-00849032/document
http://www.hal.inserm.fr/inserm-00849032/file/inserm-00849032.pdf
DOI : 10.3233/CH-2012-1622

Éditeur(s) : HAL CCSD Oxford University Press (OUP)
Résumé : International audience
Are bisphenol A (BPA) and BPA analogs (BPA-A) safe for male human reproductive function? The endocrine function of human testes explants [assessed by measuring testosterone and insulin-like factor 3 (INSL3)] was impacted by exposure of the human adult testis explants to BPA/BPA-A. The few epidemiologic studies performed suggest that bisphenols have potential endocrine disruptive properties, but they did not identify clear and direct patterns of endocrine disruption. Adult human testis explants in culture were exposed to BPA and the analogs bisphenol F (BPF), bisphenol S (BPS), bisphenol E (BPE), bisphenol B (BPB) and bisphenol A diglycidyl ether (BADGE) at 10(-9)-10(-5) M for 24 or 48 h. Human adult testes were obtained from prostate cancer patients who had no hormone therapy, or from multiorgan donors. After ex vivo exposure to the investigated bisphenols, the measured outcomes were related to histopathology (gross morphology and germ cell viability determined by anti-caspase three immunohistochemistry), and the levels of testosterone, INSL3 and inhibin B were measured using immunoassays. The levels of mRNA encoding key enzymes of bisphenol biotransformation were investigated by quantitative PCR: UGT2B15 UDP (glucuronosyltransferase two family, polypeptide B15), GUSB (glucuronidase beta), SULT1A1 and 3 (sulfotransferase family 1 A member 1 and 3) and STS (steroid sulfatase). A significant dose-dependent inhibition was found between testosterone levels measured in the culture medium and concentrations of BPA (P = 0.00778 at 24 h and P = 0.0291 at 48 h), BPE (P = 0.039) and BPF (P = 0.00663). The observed BPA and BPA-A-induced inhibition of testosterone production varied according to duration of exposure and BPA/BPA-A concentrations. BPA (10(-9) M; P < 0.05), BPB (10(-9) M; P < 0.05), BPS (10(-9) and 10(-8) M; P < 0.05) and BADGE (10(-5) M; P < 0.05) increased Leydig cell INSL3 production. By contrast, BPE dose dependently inhibited INSL3 (P = 0.0372). Conversely, Sertoli cell function (inhibin B) and germ cell viability were not significantly affected by either bisphenols. N/A. Environmental compounds cannot be deliberately administered to men, justifying the use of an ex vivo approach. A relatively low number of testes samples were available for analysis (n = 3, except for testosterone secretion with n = 5). The active concentrations of BPA and BPA-A used in the study were higher than those found in human biological fluids. Under our experimental conditions, direct exposure to BPA or BPA-A can result in endocrine disturbance in the adult human testis.
ISSN: 0268-1161

hal-01578582
https://hal-univ-rennes1.archives-ouvertes.fr/hal-01578582
https://hal-univ-rennes1.archives-ouvertes.fr/hal-01578582/document
https://hal-univ-rennes1.archives-ouvertes.fr/hal-01578582/file/Parallel%20assessment%20of%20the%20effects%20of%20bisphenol%20A_accepted.pdf
DOI : 10.1093/humrep/dex093

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
We explore the relations between deformation, annealing, and melt percolation during rifting and the effect of these processes on seismic anisotropy by analyzing the microstructures and crystal preferred orientations (CPO) in a suite of mantle xenoliths from Mega, in the southern end of the Ethiopian rift. Previous geochemical studies on these xenoliths showed evidence for interactions with variable melt types and volumes during the rifting process. The peridotites have dominantly coarse-porphyroclastic microstructures, but coarse granular or partially recrystallized microstructures also occur. The olivine CPO, characterized by orthorhombic to fiber-[100] patterns and moderate intensities, the common occurrence of (100) tilt walls, and the predominance of <0vw> rotation axes accommodating low angle misorientations in olivine support deformation by dislocation creep with dominant activation of the [100](010) system. Annealing (static recrystallization) of variable intensity followed this deformation. Modal enrichment in pyroxenes in > 60% of the studied peridotites corroborates extensive, but spatially heterogeneous reactive melt percolation leading to refertilization of the lithospheric mantle beneath the southern Ethiopian rift. The common interstitial shapes of the pyroxenes and lack of correlation between the pyroxenes and the olivine CPOs in many samples suggest that part of the refertilization is post-kinematic. However, there is no simple relation between reactive melt percolation and annealing of the olivine deformation microstructure. Comparison with data from other xenolith localities points to changes in the metasomatic imprint in the lithospheric mantle along the East African rift system correlated with the evolution in the rift maturity. Seismic properties averaged over all samples show typical lithospheric mantle patterns with fast propagation of P- and polarization of the fast S-waves parallel to the lineation. The anisotropy is moderate (< 6% for P-waves and < 4% for S-waves), implying that aligned melt must contribute to the strong seismic anisotropy measured in the Main Ethiopian rift, north of Mega.
ISSN: 0040-1951

hal-01355918
https://hal.archives-ouvertes.fr/hal-01355918
DOI : 10.1016/j.tecto.2016.05.027

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Wind energy production is very sensitive to turbulent wind speed. Thus rapid variation of wind speed due to changes in the local meteorological conditions can lead to electrical power variations of the order of the nominal power output, in particular when wind power variations on very short time scales, range at few seconds to 1 h, are considered. In small grid as they exist on islands (Guadeloupean Archipelago: French West Indies) such fluctuations can cause instabilities in case of intermediate power shortages. The developed analysis in [14] reveals three main classes of time series for the wind speed fluctuations. In this work, Probability Density Functions (PDFs) are proposed to fit the wind speed fluctuations distributions in each class. After, to simulate wind speed fluctuations sequences, we use a stochastic differential equation, the Langevin equation considering Gaussian turbulence PDF (class I), Gram–Charlier PDF (class II) and a mixture of gaussian PDF (class III). The statistical and dynamical properties of simulated wind sequences are close to those of measured wind sequences, for each class
ISSN: 0306-2619

hal-01527885
https://hal.archives-ouvertes.fr/hal-01527885
DOI : 10.1016/j.apenergy.2012.05.007

Éditeur(s) : HAL CCSD Copernicus Publications
Résumé : International audience
During Ocean Drilling Program Leg 134, a mixed sequence of volcaniclastic and carbonate sediments was cored together with basaltic breccias and a single basalt sill in Hole 833B. In this study, data from Schlumberger's Geochemical Logging Tool, together with physical property logs, characterise part of the section and establish a complete log-derived lithostratigraphy. The major transition between the sedimentary rocks and a basaltic sill at 830 mbsf (metres below sea floor) is clearly seen as well as the distinction between the silicate-rich sediments and the carbonate-rich part of the section. The transition between the volcanic sandstone interbedded with basaltic and sed-lithic breccia of Unit III, and the volcanic sandstone of Unit IV is clearly marked by the physical property logs. The accuracy of the logging data was evaluated and discussed with an improved log versus core correlation. The cluster analysis of the complete data set shows a correlation with the data provided by the mechanical caliper device, which in turn indicates the quality of the borehole.
ISSN: 1816-8957

hal-00642165
http://hal.upmc.fr/hal-00642165
http://hal.upmc.fr/hal-00642165/document
http://hal.upmc.fr/hal-00642165/file/Rabaute_et_al-SciDrilling-1997.pdf

Éditeur(s) : HAL CCSD
Résumé : International audience
Calculation of seismic risks in a zone are based on stochastic models describing at best the seismic activity. Our focus is the spatio-temporal evolution of the probability of earthquake occurrences. The main modelling tool is the theory of the point processes. We discuss about the spatio-temporal extension of ETAS (Epidemic Type Aftershock Sequence) with marks and study the properties of the log-likelihood and the maximum likelihood estimators. Seismic data from the Lesser Antilles Arc carried out between 1999 and 2004 are analyzed.
39th Annual Meeting of the Statistical Society of Canada
Wolfville, Canada

hal-00601513
https://hal.archives-ouvertes.fr/hal-00601513

Éditeur(s) : HAL CCSD National Institute of Environmental Health Sciences (NIEHS) National Institute of Environmental Health Sciences
Résumé : International audience
Long-term exposure to persistent pollutants with hormonal properties (endocrine-disrupting chemicals, EDCs) may contribute to the risk of prostate cancer (PCa). However, epidemiological evidence remains limited. We investigated the relationship between PCa and plasma concentrations of universally widespread pollutants, in particular p,p'-dichlorodiphenyl dichloroethene (DDE) and the non-dioxin like polychlorinated biphenyl congener 153 (PCB153). We evaluated before treatment 576 men with newly diagnosed PCa and 655 controls in Guadeloupe (French West Indies). Exposure was analyzed according to case-control status. Associations were assessed by unconditional logistic regression analysis, controlling for confounding factors. Missing data were handled by multiple imputation. We estimated a significant positive association between DDE and PCa (adjusted odds ratio [OR] 1.53; 95% CI 1.02, 2.30 for the highest versus lowest quintile of exposure; PTrend = 0.01). PCB153 was inversely associated with PCa (OR 0.30; 95% CI 0.19, 0.47 for the highest versus lowest quintile of exposure values; PTrend < 0.001). Also, PCB153 was more strongly associated to low-grade than high grade PCa. Associations of PCa with DDE and PCB153 were in opposite directions. This may reflect differences in the mechanisms of action of these EDCs, and although our findings need to be replicated in other populations, they are consistent with complex effects of EDCs on human health.
ISSN: 0091-6765

hal-01118553
https://hal-univ-rennes1.archives-ouvertes.fr/hal-01118553
DOI : 10.1289/ehp.1408407
PUBMED : 25493337

Éditeur(s) : HAL CCSD
Résumé : Different applications of linear elasticity in structural geology are presented in this thesis through the development of three types of numerical computer codes. The first one uses forward modeling to study displacement and perturbed stress fields around complexly faulted regions. We show that incorporating inequality constraints, such as static Coulomb friction, enables one to explain the angle of initiation of jogs in extensional relays. Adding heterogeneous material properties and optimizations, such as parallelization on multicore architectures and complexity reduction, admits more complex models. The second type deals with inverse modeling, also called parameter estimation. Linear slip inversion on faults with complex geometry, as well as paleo-stress inversion using a geomechanical approach, are developed. The last type of numerical computer code is dedicated to restoration of complexly folded and faulted structures. It is shown that this technique enables one to check balanced cross-sections, and also to retrieve fault chronology. Finally, we show that this code allows one to smooth noisy 3D interpreted faulted and folded horizons using geomechanics.
Différentes applications de l'élasticité linéaire en géologie structurale sont présentées dans cette thèse à travers le développement de trois types de codes numériques. Le premier utilise la modélisation directe pour étudier les déplacements et champs de contraintes autour de zones faillées complexes. On montre que l'ajout de contraintes inégalitaires, telles que la friction de Coulomb, permet d'expliquer l'angle d'initiation des dominos dans les relais extensifs. L'ajout de matériaux hétérogènes et d'optimisations, telles la parallélisation sur processeurs multi-coeurs ainsi que la réduction de complexité des modèles, permettent l'étude de modèles beaucoup plus complexes. Le second type de code numérique utilise la modélisation inverse, aussi appelée estimation de paramètres. L'inversion linéaire de déplacements sur les failles ainsi que la détermination de paléo-contraintes utilisant une approche géomécanique sont développées. Le dernier type de code numérique concerne la restauration de structures complexes plissées et faillées. Il est notamment montré qu'une telle méthode permet de vérifier l'équilibre de coupes géologiques, ainsi que de retrouver la chronologie des failles. Finalement, nous montrons que ce même code permet de lisser des horizons 3D faillés, plissés et bruités en utilisant la géomécanique.
https://tel.archives-ouvertes.fr/tel-00537899

tel-00537899
https://tel.archives-ouvertes.fr/tel-00537899
https://tel.archives-ouvertes.fr/tel-00537899/document
https://tel.archives-ouvertes.fr/tel-00537899/file/thesemaerten.pdf

Éditeur(s) : HAL CCSD
Résumé :  
Improvement of wood quality related traits is currently hampered by costly chemical and technological assays and the necessity to wait until the trees are nearly mature to evaluate wood properties. The availability of a vast quantity of genomic data opens now a new avenue to identify early selection criteria based on molecular information and therefore increase selection efficiency. Association mapping is becoming a method of choice to identify QTN (quantitative trait nucleotide) that contribute to complex trait variation. The implementation of this approach requires on the one hand knowledge of the molecular mechanisms underlying trait variation and polymorphism within candidate genes, and on the other hand the availability of phenotypically well characterized genetic material. We are developing this strategy in the frame of the French maritime pine breeding program, an economically important forest tree species in the South Western Europe. About 500 trees from the breeding population were evaluated for wood physical and chemical properties through the analysis of 2,800 half-sib progenies and 1,500 clones in 8 field tests. These same trees are being genotyped at 185 SNPs obtained from the sequencing of 41 candidate genes, and an additional set of 200 eSNPs detected in 147 EST-contigs (to be used as control). Statistical association between the breeding values of the 500 trees and their respective genotypes will be tested using mixed models accounting for relatedness among individuals of the breeding population.
IUFRO-CTIA joint conference, "Adaptation, Breeding and Conservation in the Era of Forest Tree Genomics and Environmental Change"
Québec City, Canada

hal-01032075
https://hal.archives-ouvertes.fr/hal-01032075

Éditeur(s) : HAL CCSD
Résumé : soutenue le 09 juin 2008
Intrinsic tribological properties of lamellar compounds are usually attributed to the presence of van der Waals gap in their structure. The controled variation of the graphite's crystal and electronic structure by intercalation processes of different species (electrophile, nucleophile ...) give a possibility to study in a more deeply way the friction reduction processes for low dimensional compounds. Three groups of intercalant are studied and tribological properties are correlated to structural and chemical evolutions.
Les propriétés tribologiques intrinsèques des composés lamellaires sont généralement attribuées à la présence de gap de van der Waals dans leur structure. La possibilité de faire varier de manière contrôlée la structure cristalline et la structure électronique du graphite par processus d'intercalation de différentes espèces chimiques (électrophile, nucléophile ...) sont utilisées pour étudier de façon plus approfondie les processus de réduction du frottement par les composés de basse dimensionnalité. Trois familles d'intercalants sont étudiées et les propriétés tribologiques sont corrélées aux évolutions structurales et chimiques.
https://tel.archives-ouvertes.fr/tel-00431713

Droits : info:eu-repo/semantics/OpenAccess
tel-00431713
https://tel.archives-ouvertes.fr/tel-00431713
https://tel.archives-ouvertes.fr/tel-00431713/document
https://tel.archives-ouvertes.fr/tel-00431713/file/These-DELBE_Karl.pdf

Éditeur(s) : HAL CCSD European Geosciences Union
Résumé : This study presents a unique database of 172 plagioclase Crystallographic Preferred Orientations (CPO) of variously deformed gabbroic rocks. The CPO characteristics as a function of the deformation regime (magmatic or crystal-plastic) are outlined and discussed. The studied samples are dominantly from slow- and fast-spread present-day ocean crust, as well as from the Oman ophiolite. Plagioclase is the dominant mineral phase in the studied samples. Plagioclase CPOs are grouped into three main categories: Axial-B, a strong point alignment of (010) with a girdle distribution of [100]; Axial-A, a strong point maximum concentration of [100] with parallel girdle distributions of (010) and (001); and P-type, point maxima of [100], (010), and (001). A majority of CPO patterns are Axial-B and P-type, in samples showing either magmatic or crystal-plastic deformation textures. Axial-A CPOs are less common; they represent 21% of the samples deformed by crystal-plastic flow. Although fabric strength (ODF J index) does not show any consistent variation as a function of the CPO patterns, there is a significant difference in the relationship between the ODF and pole figures J indices; the magmatic type microstructures have high (010) pole figures J indices, which increase linearly with ODF J index, whereas the high [100] pole figures J indices of plastically deformed samples vary in a more scattered manner with ODF J index. The multistage nature of plastic deformation superposed on a magmatic structure compared with magmatic flow, and the large number of possible slip-systems in plagioclase probably account for these differences. Calculated seismic properties (P wave and S wave velocities and anisotropies) of plagioclase aggregates show that anisotropy (up to 12% for P wave and 14% for S wave) tends to increase as a function of ODF J index. In comparison with the olivine 1998 CPO database, the magnitude of P wave anisotropy for a given J index is much less than olivine, whereas it is similar for S wave anisotropy. Despite a large variation of fabric patterns and geodynamic setting, seismic properties of plagioclase-rich rocks have similar magnitudes of anisotropy. There is a small difference in the aggregate elastic symmetry, with magmatic microstructures having higher orthorhombic and hexagonal components, whereas plastic deformation microstructures have a slightly higher monoclinic component, possibly correlated with predominant monoclinic simple shear flow in plastically deformed samples. Overall, plots for CPO strength (ODF J index), pole figure strength, CPO symmetry and seismic anisotropy show significant scattering. This could be related to sampling statistics, although our database is a factor of ten higher than the olivine database of 1998, or it could be related to the low symmetry (triclinic) structure of plagioclase resulting in the addition of degrees of freedom in the processes creating the CPOs.
ISSN: 1869-9510

hal-00963439
https://hal.archives-ouvertes.fr/hal-00963439
DOI : 10.5194/se-4-511-2013

Éditeur(s) : HAL CCSD
Résumé : International audience
(Guava (Psidium guajava L.) is a tropical fruit widely consumed around the world. The study wascarried out on four selected guava varieties grown in Martinique. Two fruit harvests were gathered at two-yearintervals, at the green/yellow color change maturity stage. First, we established the homogeneity of all fruitbatches by bootstrapping, ANOVA, box plot and multiple comparison statistical analysis on physicalparameters. Red Supreme Ruby clearly differs from the other three varieties, whereas the results for CentenoProlific are between Beauséjour and Enana Cuba. We determined on puree obtained from a homogeneousbatch of each variety the physicochemical and functional properties as well as the antioxidant properties. Ourresults show that the combination of lycopene and vitamin C, and their synergistic mechanisms in the fruitextracts may be responsible for the high antioxidant activity of guava puree, and we demonstrate a statisticallysignificant positive correlation between EC50 and lycopene.
IOSR Journal of Environmental Science, Toxicology and Food Technology (IOSR-JESTFT)

hal-01672064
https://hal.univ-antilles.fr/hal-01672064
DOI : 10.9790/2402-1109015767

Éditeur(s) : HAL CCSD
Résumé : International audience
The carbon capture and storage is considered as one of the solutions of reducing the effects of global warming. It consists in injecting large quantities of CO 2 in supercritical form directly into deeply located geological formations. One of the methods involves sequestration in the carbonate sedimentary rocks (sandstones and limestones) which are considered as a promising solution. The morphology of the pore network and solid skeleton defines important macroscopic prop-erties of the rock (permeability, stiffness). Modelling at micro scale of random heterogeneous materials (porous media) should be based on morphological and statistical characterisation 1,2 of the investigated microstructure. The work is focused on a reconstruction method by grains deposit 3 , for various range of pa-rameters, to obtain equivalent model of natural rock samples (oolitic limestone and fontainebleau sandstone). Generated samples satisfy morphological and statistical informations 4 which were obtained by 3D image analysis of X-ray tomography of the natural rock samples. For validation of the modelling numerical computations of mechanical and transfer properties are also provided.
14th European Mechanics of Materials Conference - EMMC14
Gothembourg, Sweden

hal-01103163
https://hal.archives-ouvertes.fr/hal-01103163