Éditeur(s) : HAL CCSD
Résumé : International audience
Radiocarbon dating and "old wood problem" in the Antilles : the state of the artAmong the many effects that may distort the interpretation of radiocarbon dates are those for which the age of the archaeological event is different from the radiocarbon age of the sample or "14C event" age. This type of problem arises in many cases, notably in the "old wood effect”, and occurs in various regions of the world where very long-lived trees species are common. In the Caribbean anthracological studies indicate a very high frequency of some indigenous centuries-old species such as Guaiacum, Guaiacum officinale L. However the absence of tree-ring data in humid tropical zones deprives us of an accurate inventory of long-lived species and especially the assessment of their longevity. Here we present measurements which enable us to estimate the longevity of archaeological Guaiacum wood posts. They highlight a gap of several centuries between wood from the outer edge and the heart of the tree. This example illustrates the additional uncertainty that can result from dating archeological events when dates are realized on unidentified botanical species from which the area that was sampled is unknown. Another source of error could arise from the use of rot-proof dead wood as fuel if we take into consideration that major hurricanes can produce large amounts of dead wood that may be collected for decades, even centuries. To improve chronometric data used in archaeological interpretations, it is necessary to ensure the quality of the dating process by following a protocol similar to those used in other regions of the world based on a better understanding of the material to be dated by preliminary identifications of wood samples: species, anatomical part, wood moisture content (unseasoned or seasoned).
Radiocarbono y "problema madera vieja", que data de las Antillas: estado del arteEntre los muchos efectos que pueden distorsionar la interpretación de fechas de radiocarbono, destacan aquellos para los que la edad de la prueba arqueológica es diferente de la edad de radiocarbono de la muestra, o la edad del "evento de radiocarbono." Este tipo de problema se presenta en muchos casos, especialmente uno llamado "efecto madera vieja." Esto se refleja en diversas regiones del mundo donde las especies de plantas de mucha longevidad son comunes. En el Caribe, los estudios antracológicos disponibles indican una muy alta frecuencia de algunas especies autóctonas como el guayaco, Guaiacum officinale L. Sin embargo, la casi ausencia de datos de anillos de árboles en los trópicos húmedos, nos impide realizar un inventario exacto de especies de mucha longevidad y sobre todo la evaluación de la longevidad. Algunas de las pruebas presentadas aquí permitieron una estimación de la longevidad de de unos postes de guayaco de origen arqueológico. Ponen de manifiesto una brecha de varios siglos entre las partes externas y el corazón del tronco. Este ejemplo ilustra la aparición de una incertidumbre adicional en la datación de los eventos arqueológicos cuando no conocemos la especie botánica y tampoco la zona de la muestra en el árbol. Otra fuente de error puede surgir de la utilización de la madera muerta de calidad duradera como combustible ya que los grandes huracanes pueden producir grandes cantidades de madera muerta, que puede ser requerida durante décadas, incluso siglos. Para mejorar los datos cronométricos utilizados en interpretaciones arqueológicas, es necesario asegurarse de la calidad de las fechas, y por lo tanto seguir un protocolo similar a los utilizados en otras regiones fundado en una mejor comprensión de los elementos: especie, parte anatómica, humedad de la madera usada (verde o seco).
Parmi les nombreux effets susceptibles de fausser l’interprétation des datations par le radiocarbone, figurent ceux pour lesquels l’âge de l’événement archéologique est différent de l’âge radiocarbone de l’échantillon, ou âge de l’« événement radiocarbone ». Ce type de problème se pose dans de nombreux cas, en particulier celui dénommé « effet vieux bois ». Cette question est prise en compte dans diverses régions du monde où des espèces végétales très longévives sont fréquentes. Dans les Antilles les études anthracologiques disponibles indiquent une fréquence très importante de certaines espèces autochtones multiséculaires dont le gaïac, Guaiacum officinale L.. Cependant, la quasi absence de données dendrochronologiques dans la zone tropicale humide, nous privent d’un inventaire précis des espèces longévives et surtout de l’évaluation de leur longévité. Quelques tests présentés ici ont permis une estimation de la longévité de poteaux d’origine archéologique en bois de gaïac. Ils mettent en évidence un décalage de plusieurs siècles entre les parties externes et le cœur du tronc. Cet exemple illustre l’apparition d’une incertitude supplémentaire dans la datation de l’événement archéologique lorsque que l’on ne connaît ni l’espèce botanique ni la zone de prélèvement dans l’arbre. Une autre source d’erreur pourrait provenir de l’utilisation de bois mort de qualité très durable comme combustible, sachant que les grands cyclones peuvent produire d’importantes quantités de bois mort susceptible d’être récolté pendant des décennies, voire des siècles. Afin d’améliorer les données chronologiques utilisées dans les interprétations archéologiques, il apparaît nécessaire de s’assurer de la qualité des datations, et donc de suivre un protocole similaire à ceux utilisés dans d’autres régions basé sur une meilleure connaissance des éléments datés : espèce, partie anatomique, humidité du bois utilisé (vert ou sec).
Puerto Rico 2013 : Actas del 25to Congreso Internacional de Arqueología del Caribe - Proceeding of the 25th International Congress for Caribbean Archeology - Comptes rendus des communications du 25e Congrés International de l'Archéologie de la Caraïbe
San-Juan, Puerto Rico

hal-01198567
https://hal.archives-ouvertes.fr/hal-01198567
https://hal.archives-ouvertes.fr/hal-01198567/document
https://hal.archives-ouvertes.fr/hal-01198567/file/Stouvenot%20et%20al.%202015.%20Effet%20vieux%20bois%20radiocarbone%20Antilles%20HD.pdf

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
A detailed rock-magnetic and archeointensity study was carried out on materials baked by a western Mexican artisan following traditional techniques to produce faithful reproductions of archeological pieces of the Michoacan region (Western Mesoamerica). The field strength at the site (41.0 +/- 0.51 mu T) was measured with a fluxgate magnetometer and the temperature of the furnace during the baking process was monitored continually by means of a thermocouple placed in the middle of the baking cavity.;Rock-magnetic experiments performed on the raw material (clay and paste) and on in situ prepared baked ceramics and bricks included measurement of thermomagnetic curves (susceptibility and strong-field magnetization versus temperature), first-order reversal curves (FORC), anisotropy of magnetic susceptibility (AMS) and anisotropy of thermoremanent magnetization (A-TRM). Magnetite and probably hematite are present in the samples as carriers of the remanence. Hysteresis ratios suggest that the samples fall in the pseudo-single-domain grain size region, which may indicate a mixture of multidomain and a significant amount of single-domain grains.;Ceramic pieces and brick fragments were subjected to the Thellier-Coe archeointensity method and to an alternative paleointensity experiment, with a TRIAXE magnetometer, in order to check whether they are faithful recorders of the local geomagnetic field strength.;Mean raw-intensity of sample M1 (pottery) overestimates a 7% the expected site intensity, while those corresponding to the brick samples (LQ1 and LQ2) underestimate it 15%. Brick sample LNQ shows a slightly lower intensity (7%), but agrees with the expected site intensity within the experimental uncertainty. The intensity retrieved from the volcanic fragment also included closely reproduces the expected intensity. After A-TRM and cooling-rate corrections, all mean raw values move closer to the expected intensity.;Measurement of temperatures at different parts inside the kiln (bottom and upper parts of both central and peripheral parts) revealed the existence of significant thermal gradients, similar to those observed in ovens from other localities. Different cooling rates are then expected in a single oven.;The scatter in the intensity determinations observed in this study, retrieved from pieces elaborated together in the same oven, could arise from this differentiated cooling rate within the oven and thus, to an inappropriate cooling rate correction in the archeointensity protocol. As this situation was probably reproduced in the baking of ancient ceramic artifacts, a better knowledge of the temperature distribution inside these types of kiln would be desirable in order to choose the appropriate cooling rate correction.
ISSN: 0031-9201

hal-00644559
https://hal.archives-ouvertes.fr/hal-00644559
DOI : 10.1016/j.pepi.2011.06.007

Éditeur(s) : Public Library Science
Résumé : Estimating diversity and abundance of fish species is fundamental for understanding community structure and dynamics of coral reefs. When designing a sampling protocol, one crucial step is the choice of the most suitable sampling technique which is a compromise between the questions addressed, the available means and the precision required. The objective of this study is to compare the ability to sample reef fish communities at the same locations using two techniques based on the same stationary point count method: one using Underwater Visual Census (UVC) and the other rotating video (STAVIRO). UVC and STAVIRO observations were carried out on the exact same 26 points on the reef slope of an intermediate reef and the associated inner barrier reefs. STAVIRO systems were always deployed 30 min to 1 hour after UVC and set exactly at the same place. Our study shows that; (i) fish community observations by UVC and STAVIRO differed significantly; (ii) species richness and density of large species were not significantly different between techniques; (iii) species richness and density of small species were higher for UVC; (iv) density of fished species was higher for STAVIRO and (v) only UVC detected significant differences in fish assemblage structure across reef type at the spatial scale studied. We recommend that the two techniques should be used in a complementary way to survey a large area within a short period of time. UVC may census reef fish within complex habitats or in very shallow areas such as reef flat whereas STAVIRO would enable carrying out a large number of stations focused on large and diver-averse species, particularly in the areas not covered by UVC due to time and depth constraints. This methodology would considerably increase the spatial coverage and replication level of fish monitoring surveys.
Plos One (1932-6203) (Public Library Science), 2014-01 , Vol. 9 , N. 1 , P. -

Droits : 2014 Mallet et al. This is an open-access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.
http://archimer.ifremer.fr/doc/00170/28132/26352.pdf
DOI:10.1371/journal.pone.0084344
http://archimer.ifremer.fr/doc/00170/28132/

Éditeur(s) : HAL CCSD
Résumé : The Earth's magnetic field shows a large range of temporal variations from the year to several million years. I studied during my PhD thesis several aspects of these fluctuations, from recent secular variations to reversals. The first part of my manuscript deals with archeomagnetism, a discipline that allows to track the temporal variations of the Earth's magnetic field through millennia, mainly from archeological materials. I studied two sets of samples , one from Greece (Neolithic period 6800-3200 B.C.) and the other from Mexico (Palenque, Maya Classic period 320-840 A.D.), to acquire new archeointensity data in order to better constrain the secular variation of the geomagnetic field. By comparing my data with those available in the literature and with the various global and regional models, I showed that the secular variations during the Neolithic in Greece and during the first millennium in Central America are poorly defined. My data suggest that local components, not described by global models, may exist in these regions. They reinforce the importance of developing specific regional models. As a consequence, the acquisition of new high quality data is of main importance. The second part presents the description of a geomagnetic field reversal. This work was based on two points : first by studying transitional directions to provide new constraints on the possible preferred longitudinal paths of virtual geomagnetic poles (VGPs) and second by checking transitional paleointensities obtained on a volcanic sequence in Akaroa volcano (New Zealand). Indeed the transitional field intensity is significantly higher than the field intensity before and after the reversal. We re-sampled this sequence, and the directional results show a complex sequence of N-T-R-T-N-T-R polarity. The transitional VGPs obtained are clustered in two longitudinal bands through Australia and America. This observation seems to reinforce the assumption of a core-mantle interaction over several million years. Following a rock magnetic study, I selected samples that could provide a value for the Thellier and multispecimen paleointensity methods. The obtained paleointensity are relatively low (about 20 μT) during the polarity change and strong at the end of the sequence. Based both on the field strength values and on the radiochronological ages, showing that the sequence was erupted in a very short time, I suggest that only the C4AR.1n-C4Ar.1r reversal was recorded in this sequence. In this assumption, the reversal shows a complex path comparable to other reversals recorded in the northern hemisphere (for example the Steens Mountain ), including a rebound before stabilizing. Finally the last part is devoted to the development of a new methodology and a new apparatus to determine absolute paleointensity. Following the low success rate of paleointensity experiments from the previous study, I decided to test the multispecimen protocol, which can be applied to samples yielding a predominant multidomaine behavior. The main technical drawback of this method lies in the application of the laboratory field along the natural remanent magnetization, a difficult task to perform accurately in standard paleointensity ovens. Thus, we decided to adapt sample holders from our standard oven in order to allow the sample orientation in space and to develop an ultra-fast heating oven prototype particularly well-suited for this method, allowing to apply the laboratory field in the 3 dimensions. I checked the different multispecimen protocols on historical lavas from Reunion and Etna volcano, yielding very different magnetic mineralogies. For all flows, I obtained paleointensities very close from the expected values, regardless from the magnetic mineralogy, revealing the feasibility of our apparatus and the promising interest of the method. The application of various corrections on the statistical estimation of the intensity value or on the cooling rate had no significant impact on my results.
La première partie de ma thèse porte sur l'archéomagnétisme, discipline qui permet de retracer l'évolution temporelle du champ magnétique terrestre au travers des derniers millénaires, principalement à partir des matériaux archéologiques. J'ai étudié deux jeux d'échantillons provenant pour l'un de la Grèce (période néolithique, 6800-3200 avant J.C.) et pour l'autre du Mexique (Palenque, période Maya Classique 320-840 après J.C.), dans le but d'acquérir de nouvelles données d'archéointensité et de mieux contraindre la variation séculaire du champ magnétique terrestre. La comparaison de mes données avec celles disponibles dans la bibliographie et avec les différents modèles globaux et régionaux a mis en évidence que les variations séculaires au Néolithique en Grèce et au cours du premier millénaire en Amérique Centrale sont très mal définies. Mes données suggèrent que des composantes locales, non prisent en compte dans les modèles globaux peuvent exister au niveau de ces régions. Elles renforcent l'intérêt de développer des modèles régionaux précis. Pour ce faire, l'acquisition de nouvelles données de haute qualitéest un élément majeur. La deuxième partie traite de la description d'un renversement du champ magnétique terrestre. Cette étude a été basée sur deux points précis : étudier les directions transitionnelles afin d'apporter de nouvelles contraintes sur le possible confinement longitudinal des pôles géomagnétiques virtuels (PGV) d'une part, et d'autre part vérifier des paléointensités transitionnelles obtenues sur la séquence volcanique d'Akaroa (Nouvelle Zélande), dont l'intensité est significativement supérieure à celles des intensités avant et après le renversement. Nous avons ré-échantillonné cette séquence, et l'évolution directionnelle obtenue pour ce renversement est une succession complexe de polarités N-T-R-T-N-T-R. Les PGV obtenus semblent se regrouper sous deux bandes longitudinales sous l'Australie et l'Amérique, ce qui renforce l'hypothèse d'une interaction entre le manteau et le noyau sur plusieurs millions d'années. Suite à une étude de minéralogie magnétique, j'ai sélectionné les échantillons susceptibles de fournir une valeur de paléointensité par les méthodes de Thellier et du multispecimen. Les paléointensités obtenues sont relativement faibles (environ 20 μT) au cours du changement de polarité et forte à la fin de la séquence. Mon interprétation, basée à la fois sur les valeurs de l'intensité du champ et sur les données radiochronologiques montrant que la séquence s'est mise en place très rapidement, est de considérer que seul le renversement C4Ar.1n-C4Ar.1r a été enregistré dans cette séquence. Dans cette hypothèse, le renversement montre un cheminement complexe comparable à d'autres renversements enregistrés dans l'hémisphère nord (comme celui de la Steens Mountain par exemple), incluant un phénomène de rebond avant de se stabiliser. La troisième partie de ma thèse est consacrée au développement d'une nouvelle méthodologie et d'un nouvel appareillage pour déterminer des paléointensités. Le faible taux de réussite des expériences de paléointensité de l'étude précédente m'a poussé à m'intéresser au protocole multispecimen, qui peut s'appliquer aux échantillons possédant un comportement polydomaine. L'inconvénient technique majeur de cette méthode réside dans l'application du champ le long de l'aimantation naturelle, difficile à réaliser avec précision dans les fours standards. Pour ce faire, nous avons décidé de développer des porte-échantillons permettant d'orienter les échantillons dans l'espace pour le four standard et un prototype de four à chauffage ultra-rapide particulièrement bien adapté avec la possibilité d'orienter le champ appliqué dans les 3 dimensions. J'ai testé les différents protocoles de la méthode sur des laves historiques de la Réunion et de l'Etna, possédant des minéralogies très différentes. Pour l'ensemble des coulées étudiées, j'ai obtenu des paléointensités très proches des valeurs attendues, et ce indépendamment de la minéralogie, révélant ainsi le faisabilité de notre appareillage et le côté prometteur de la méthode. L'application de diverses corrections sur la statistique d'estimation de la valeur de l'intensité ou sur le taux de refroidissement n'ont eu aucun impact notable sur mes résultats.
https://tel.archives-ouvertes.fr/tel-00719380

tel-00719380
https://tel.archives-ouvertes.fr/tel-00719380
https://tel.archives-ouvertes.fr/tel-00719380/document
https://tel.archives-ouvertes.fr/tel-00719380/file/thesefanjat2012.pdf

Éditeur(s) : HAL CCSD Elsevier
Résumé : DNA metabarcoding on soil samples is increasingly used for large-scale and multi-taxa biodiversity studies. However, DNA extraction may be a major bottleneck for such wide uses. It should be cost/time effective and allow dealing with large sample volumes so as to maximise the representativeness of both micro- and macro-organisms diversity. Here, we compared the performances of a fast and cheap extracellular DNA extraction protocol with a total DNA extraction method in retrieving bacterial, eukaryotic and plant diversity from tropical soil samples of ca. 10 g. The total DNA extraction protocol yielded more high-quality DNA. Yet, the extracellular DNA protocol provided similar diversity assessments although it presented some differences in clades relative abundance and undersampling biases. We argue that extracellular DNA is a good compromise between cost, labor, and accuracy for high throughput DNA metabarcoding studies of soil biodiversity.
ISSN: 0038-0717

hal-01532638
https://hal.archives-ouvertes.fr/hal-01532638
DOI : 10.1016/j.soilbio.2016.01.008
PRODINRA : 384522

Éditeur(s) : HAL CCSD
Résumé : The presence of biological matter (biofilms) in deep geological sites for storage of, for instance, toxic elements or groundwater in aquifers was clearly proved. That biomass triggers physical and chemical processes which greatly modify the durability and the sustainability of the sites. These processes, mainly from oxidative/reductive reactions, are poorly understood. This is mainly due to the fact that former studies were done at the macroscopic level far away from the micrometric scale where relevant processes induced by bacteria take place. Investigations at microscopic level are needed. Thus, we developed an experimental set-up based on the combined use of optical microscopy (transmission), atomic force microscopy (AFM) and electrical and electro-chemical AFM microscopy (EC_AFM) in order to get simultaneous information on topographic and electro-chemical processes. The first highly sensitive step was to use AFM with biological samples in liquid environment: wepresent here a study about AFM imaging of living, moving or self-immobilized bacteria, in their genuine physiological liquid medium and in true in vivo conditions. No external immobilization protocol, neither chemical nor mechanical was needed. For the first time, the native gliding movements of Gram negative Nostoc cyanobacteria upon the surface were studied by AFM. AFM height and mechanical stiffness data were simultaneously acquired. From these, mechanical parameters, inner turgor pressure and Young modulus, were derived for different bacterial species (Anabaenopsis circularis, Rhodococcus wratislaviensis). Our study revealed that AFM imaging is thus possible on moving living species. These results open a large window on new studies of both dynamical phenomena of practical and fundamental interests such as the formation of biofilms and dynamic properties of bacteria in real physiological conditions. The second delicate step was to combine AFM and optical measurements with electrical ones. We mounted a new experimental set-up coupling real-time (i) monitoring of optical properties as the optical density (OD) evolution related to bulk bacterial growth in liquid or as the counting of number of bacteria adhering on the surface of the sample as well and (ii) electrical and electrochemical measurements. Furthermore, these results will shortly be applied to the optimized monitoring of the in-situ activity of bacteria consuming oil pollutants, following this way, in real-time, the bioremediation of an oilcontaminated soil (ANR ECOTECH_BIOPHY program).
La présence de matière biologique (biofilms) dans les sites de stockage géologique profond, d'éléments toxiques ou encore de l'eau potable des aquifères est maintenant clairement démontrée. Cette biomasse est à l'origine de processus physiques et chimiques qui modifient considérablement la durabilité et la pérennité des sites concernés. Ces processus, principalement de type oxydo-réductif, sont encore mal compris. Ceci est principalement dû aux méthodes d'investigation, principalement macroscopiques, loin de l'échelle micrométrique caractéristique des bactéries. Seules des études, basées sur des méthodes d'investigation locale, peuvent apporter les informations requises. Ainsi, nous avons développé un dispositif expérimental basé sur l'utilisation combinée de la microscopie optique (en transmission), la microscopie à force atomique (AFM) et la microscopie AFM en mode électrique et électrochimique (EC_AFM) afin d'obtenir des informations simultanées sur la topographie de l'échantillon et sur les processus électrochimiques à l'échelle des bactéries. La première étape sensible consistait à utiliser l'AFM sur des échantillons biologiques en milieu liquide: nous présentons ici les résultats de l'imagerie AFM en milieu liquide de plusieurs types de bactéries dans leurs conditions physiologiques naturelles (conditions in vivo). Aucun protocole d'immobilisation, ni chimique ni mécanique, n'a été nécessaire; et pour la première fois, les mouvements de reptation de cyanobactéries Nostoc ont été étudiés par l'AFM. Les études AFM ont permis d'acquérir des données topographiques mais aussi mécaniques : nous avons pu ainsi mesurer le module d'Young, la pression de turgescence de différentes souches bactériennes (Anabaenopsis circularis, Rhodococcus wratislaviensis). Cette étude complète, a révélé que l'imagerie AFM est donc possible sur des espèces vivantes en mouvement. Ces résultats ouvrent une grande fenêtre sur de nouvelles études d'intérêts tels que la formation de biofilms et les propriétés dynamiques de bactéries dans des conditions physiologiques réelles. La deuxième étape délicate était de combiner l'AFM aux mesures optiques et électriques. Nous avons développé un nouveau dispositif expérimental permettant (i) le suivi de l'évolution de la croissance bactérienne par la mesure des propriétés optiques comme la densité optique DO (pour le développement bactérien en volume - milieu planctonique) , ou l'analyse de l'image du substrat par comptage du nombre de bactéries sur la surface de l'échantillon (biofilm), et (ii) les mesures électriques et électrochimiques. L'ensemble de ces résultats sera prochainement appliqué au développement de nouveaux outils de surveillance d'une biodépollution de terrain contaminé par les hydrocarbures, par le suivi in situ et en temps réel de l'activité de bactéries dépolluantes (ECOTECH_BIOPHY ANR).
https://tel.archives-ouvertes.fr/tel-01044714

tel-01044714
https://tel.archives-ouvertes.fr/tel-01044714
https://tel.archives-ouvertes.fr/tel-01044714/document
https://tel.archives-ouvertes.fr/tel-01044714/file/theseDhahri2013.pdf

Éditeur(s) : HAL CCSD American Arachnological Society
Résumé : To obtain a reliable description of spider communities, robust sampling protocols are crucial. However, it remains unclear if descriptions of spider communities in tropical habitats require both day and night sampling. Here we tested whether sampling both day and night in high and low vegetation strata would lead to better diversity estimates of spider communities than sampling at only one period of the day. We determined spider taxonomic diversity in a network of 12 plots in French Guiana along a vegetation gradient. We found high alpha diversity of spiders as expected for a tropical area at every site. We showed strong differences in spider alpha and beta diversity between high and low vegetation strata, while they were similar between day and night sampling. Our results suggest that collecting spiders at only one period is sufficient to describe the diversity of spider communities across land use types in the neotropics.
ISSN: 0161-8202

hal-01535342
https://hal.archives-ouvertes.fr/hal-01535342
PRODINRA : 346667

Éditeur(s) : HAL CCSD BioMed Central
Résumé : International audience
BACKGROUND: Reliable molecular typing tools are required for a better understanding of the molecular epidemiology of Plasmodium vivax. The genes msp3a and msp1_block5 are highly polymorphic and have been used as markers in many P. vivax population studies. These markers were used to assess the genetic diversity of P. vivax strains from French Guiana (South America) and to develop a molecular typing protocol. METHODS: A total of 120 blood samples from 109 patients (including 10 patients suffered from more than one malaria episode, samples were collected during each episode) with P. vivax infection were genotyped. All samples were analysed by msp3a PCR-RFLP and msp1_b5 gene sequencing was performed on 57 samples. Genotyping protocol applied to distinguish between new infection or relapse from heterologus hypnozoites and treatment failure or relapse from homologus hypnozoites was based on analysing first msp3a by PCR-RFLP and secondly, only if the genotypes of the two samples are identical, on sequencing the msp1_b5 gene. RESULTS: msp3a alleles of three sizes were amplified by PCR: types A, B and C. Eleven different genotypes were identified among the 109 samples analysed by msp3a PCR-RFLP. In 13.8% of cases, a mixed genotype infection was observed. The sequence of msp1_b5 gene revealed 22 unique genotypes and 12.3% of cases with mixed infection. In the 57 samples analysed by both methods, 45 genotypes were found and 21% were mixed. Among ten patients with two or three malaria episodes, the protocol allowed to identify five new infections or relapses from heterologous hypnozoites and six treatment failures of relapses from homologous hypnozoites. CONCLUSION: The study showed a high diversity of msp3a and msp1_b5 genetic markers among P. vivax strains in French Guiana with a low polyclonal infection rate. These results indicated that the P. vivax genotyping protocol presented has a good discrimination power and can be used in clinical drug trials or epidemiological studies.
ISSN: 1475-2875

pasteur-00590981
https://hal-riip.archives-ouvertes.fr/pasteur-00590981
DOI : 10.1186/1475-2875-8-40
PUBMED : 19284592

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
In order to perform a human and ecological risk assessment of pharmaceutical products (PPs) in natural waters, it is necessary to accurately quantify a broad variety of PPs at low concentrations. Although numerous currently implemented analytical methodologies, less is known about the preservation of PPs in natural water samples within the period before analysis (holding time, storage conditions). This paper is the first literature review about the stability of PPs in natural waters (surface and groundwaters) during sample storage. The current work focuses on a comparison of the performances of the available preservation techniques (filtration, container materials, storage temperature, preservative agents, etc.) for PPs in samples. All 58 reviewed PPs may be successfully stabilized during 7 days in surface waters by at least one appropriate methodology regarding temperature, acidic and non-acidic preservatives. When temperature is not a sufficient preservation parameter f! or some PPs (hormones and fluoxetine) its combination with the addition of chemical agents into the samples may prolong the integrity of the PPs during storage in surface water. There is a strong need to use standard protocols to assess and compare the stability of PPs in environmental water matrices during storage as well as during analytical preparation or analysis (European criteria 2002/657/EC). Since the stability of PPs during sample storage is a critical parameter that could call into question the quality of the data provided for the concentrations, the design of stability studies should rigorously take into account all critical parameters that could impact the concentrations of the PPs with time.
Talanta

insu-00839186
https://hal-insu.archives-ouvertes.fr/insu-00839186
DOI : 10.1016/j.talanta.2013.01.042

Éditeur(s) : HAL CCSD Kasetsart University
Résumé : http://www.ceropath.org/references/rodent_protocols_book
Technical book
"Protocols for field and laboratory rodent studies" present the best practices for the studies of rodents and rodent-borne pathogens and parasites from the field to the laboratory. It aims at covering the different steps of rodent studies: 1) Trapping, 2) Dissection and preparation of tissue samples for pathogens screening, 3) Identification of species, 4) Isolation of helminths, 5) Preparing rodent specimens for collections. This book gathers accurate recommendations and techniques, based on those generally accepted in the literature and adapted from the experience of the different authors during rodent surveys and laboratory work. Its presentation is designed to work in the fields with a clear and colorful organization of each chapter, with: inserts providing definitions and recommendations, protocols detailed step by step, and an emphasis on illustrations with several photographs. This book is a publication generated by the CERoPath project (Community Ecology of Rodents and their Pathogens in a changing environment, www.ceropath.org) funded by the French Ministry of Research from 2008 to 2011.
http://hal.ird.fr/ird-00714514

ird-00714514
http://hal.ird.fr/ird-00714514
http://hal.ird.fr/ird-00714514/document
IRD : fdi:010056183

Éditeur(s) : HAL CCSD Royal Society of Chemistry
Résumé : International audience
Low-level water measurements of geological materials are fundamental in understanding the volatile inventories of the Earth from the mantle to crustal reservoirs. Here we describe the development of microanalytical techniques using the new SHRIMP SI ion microprobe to measure the abundances of OH− (as a proxy for water) in volcanic glass and nominally anhydrous minerals (NAMs). Samples were first analysed at the Carnegie Institute of Washington (CIW) on their Cameca ims-6f with calibrations based on previous FTIR and manometry analyses. SHRIMP SI is a large geometry ion microprobe and is currently mainly used for O and S isotope analyses. The analytical protocol used here incorporates multiple collection of 16O− and 16O1H− allowing rapid measurements. A single calibration line incorporating all glasses and NAMs for the SHRIMP SI allows calibration of 16O1H−/16O− to H2O over a wide range in concentration (50 to 15 000 ppm H2O). This calibration line has around a 10% uncertainty, which appears to be limited only by sample heterogeneity. The current background for SHRIMP analysis is between 20–40 ppm but this is expected to improve with improved pumping on the source chamber. A current limitation to water analysis of NAM samples, by any technique, is having a range of standard materials to enable OH− calibration to absolute H2O concentrations. Data are presented for 7 NAM samples (2 olivines, 2 orthopyroxenes and 3 clinopyroxenes) that appear to be promising as potential standards for international laboratory H2O measurements. These NAM samples have been analysed and characterised here by SHRIMP SI, FTIR, EMP and the Cameca ims-6f ion microprobe at CIW. Four of these samples have previously been measured by manometry to determine absolute H2O concentrations.
ISSN: 0267-9477

hal-01243514
https://hal.archives-ouvertes.fr/hal-01243514
DOI : 10.1039/c5ja00047e

Éditeur(s) : HAL CCSD
Résumé : Ctenophores are one of the four animal phyla positioned outside from the Bilateria. Most ctenophore species are planktonic and gelatinous, and are easily recognisable by their eight comb rows used for swimming. Ctenophore systematics remains nowadays poorly understood. Anatomical characters do not help much in placing them within the animal tree, and similarly the grounds for establishment of their internal phylogeny as well as delimitation of species are notoriously weak due to a paucity of informative morpho-anatomical characters. Until now, the use of molecular data has failed to improve significantly this situation. The aim of this PhD thesis was to bring a contribution to our understanding of ctenophore evolution at different taxonomic scales. At the metazoan level, the position of ctenophores was addressed using a phylogenomic approach. Taxonomic sampling was significantly improved through sequencing and assembly of transcriptomes of 22 non-bilaterian species (belonging to ctenophores, cnidarians and sponges). Two independent datasets were analysed, one consisting in an update of an existing supermatrix of 128 genes, the other one (4235 genes) having been entirely built de novo, thanks to a newly-devised semi-automated protocol intended to eliminate all major potential causes of artefacts (contaminations, paralogies, missing data). Results clearly contradict recent phylogenomic studies which claimed Ctenophora to be the most early-diverging animal lineage, our analyses instead supporting Porifera as the sister-group to other metazoans. The exact position of ctenophores remains however uncertain at this stage, different conditions of analyses yielding three contradictory hypotheses as open possibilities. At the intra-phyletic level, analyses of a ADNr 18S and ITS (internal transcribed spacers) dataset, together with study of duplicated genes and the results of phylogenomic analyses, allowed resolving most phylogenetic relationships between ctenophore orders and families, including the placement of the ctenophore tree root. Finally, at smaller taxonomic scale, in-depth comparison between two species of the genus Pleurobrachia using immunohistochemistry demonstrates the potential of these techniques for uncovering new structural “micro-anatomical” characters useful for diagnosis and identification of ctenophore species. It is our hope that this work will contribute to improving the systematics of a poorly known phylum of great importance for understanding early animal evolution.
Les cténophores représentent l’un des quatre embranchements animaux extérieurs aux Bilateria. La majoritédes espèces sont planctoniques et gélatineuses, et sont reconnaissables à leurs huit rangées de peignes dont lebattement permet la nage. Leur systématique est encore de nos jours mal comprise. L'anatomie descténophores offre peu de caractères aussi bien pour placer la lignée dans l’arbre des métazoaires, que pourétablir les relations de parenté au sein de l’embranchement et délimiter les espèces, et jusqu’à présent lesdonnées moléculaires n’ont pas permis de résoudre ces problèmes de manière satisfaisante. L’objectif de cetravail de thèse est de contribuer à améliorer notre compréhension de l'évolution des cténophores àdifférentes échelles taxonomiques. A l’échelle des métazoaires, la position phylogénétique des cténophores aété abordée par une approche phylogénomique. Un effort significatif a été réalisé pour améliorerl’échantillonnage taxonomique à travers le séquençage et l’assemblage des transcriptomes de 22 espèces denon-Bilateria (cténophores, cnidaires, spongiaires). Deux jeux de données indépendants ont été analysés, lepremier représentant une mise à jour d’une supermatrice existante de 128 gènes ; le second (4235 gènes)ayant été entièrement construit de novo via un protocole original comportant la mise au point de nouvellesméthodes pour traiter de manière semi-automatisée les principales sources potentielles d’artéfact(contaminations, paralogies, données manquantes). Les résultats contredisent certaines études récentes enmontrant que les spongiaires et non les cténophores représentent le groupe-frère des autres métazoaires. Laposition exacte de ces derniers reste à ce stade incertaine (trois options se présentant suivant les analyses). Al’échelle intra-phylétique, l'analyse d'un jeu de données comprenant les marqueurs ADNr 18S et InternalTranscribed Spacers (ITS), associée à des analyses de gènes dupliqués chez les cténophores et aux analysesphylogénomiques précédentes, a permis de résoudre une grande partie des relations phylogénétiques entre lesordres et les familles de cténophores, tout en permettant de préciser la position de la racine. Enfin, à uneéchelle taxonomique plus fine, une comparaison approfondie entre deux espèces du genre Pleurobrachia aumoyen de marquages immunohistochimiques montre le potentiel de ces techniques comme source denouveaux caractères structuraux « micro-anatomiques » à valeur diagnostique pour la délimitation etl’identification des espèces de cténophores. En conclusion, ce travail se veut une contribution au progrès dela systématique d’un embranchement encore méconnu et d’une grande importance pour la compréhensiondes évènements anciens de l’évolution animale.
https://tel.archives-ouvertes.fr/tel-01165014

NNT : 2014PA066448
tel-01165014
https://tel.archives-ouvertes.fr/tel-01165014
https://tel.archives-ouvertes.fr/tel-01165014/document
https://tel.archives-ouvertes.fr/tel-01165014/file/these_archivage_3158995o.pdf

Éditeur(s) : HAL CCSD
Résumé : In order to minimize CO2 atmospheric concentration, a solution consists in sequestrating CO2 in geological reservoirs. To estimate long term risks, it is necessary to quantify the couplings between reaction processes as well as structural and hydrodynamical modifications. We realised two experimental benches enabling injecting CO2-enriched-brine in conditions corresponding to in situ storage (T < 200 oC and P < 200 bar) and developed
an experimental protocol using X-Ray microtomography and fluid and rock analyses in order to measure the variations of physical and chemical parameters.
The study of carbonated reservoirs near the injection well, allows quantifying different k-phi relationships depending on the dissolution processes and triggered by the local fluid chemical composition and initials conditions. Away from the injection well, we observe carbonate precipitation decreasing the permeability. The study of fracturated caprock samples shows that alternative percolation of CO2-enriched-brine and CO2 gas increases the fracture permeability.
The study of silicated rocks indicates carbonate precipitation in zeolite sandstone and sintered dunite grains. Nevertheless, in zeolite sandstone we also observe the precipitation of clay particles located in the uid pathways which decrease strongly the permeability.
Afin de minimiser la concentration en CO2 dans l'atmosphère une solution consiste à le séquestrer dans les réservoirs géologiques. Pour évaluer les risques à long terme, il est nécessaire de quantifier les couplages entre les processus réactionnels et les modifications structurales et hydrodynamiques. Dans cette optique, nous avons construit deux dispositifs expérimentaux permettant d'injecter des saumures chargées en CO2 dans les conditions de stockage (T < 200 °C et P < 200 bar) et mis en oeuvre un protocole expérimental utilisant la microtomographie RX et l'analyse des roches et des fuides pour quantifier les variations des paramètres physiques et chimiques. Dans le cas des réservoirs carbonatés, on observe, près du puits d'injection, une forte variabilité des relations k-phi en fonction du régime de dissolution contrôlé par la chimie locale du fluide, ainsi que par les conditions initiales. A plus grande distance, on observe des processus de précipitation diminuant fortement la perméabilité. L'étude des roches de couverture fracturées (argilite) a montré qu'une percolation alternée d'une saumure chargée en CO2 et de CO2 gaz augmentait la perméabilité de fracture. Dans le cas des roches silicatées, la précipitation de carbonates est mise en évidence aussi bien dans les grès à zéolites que dans les frittés de dunite de San Carlos. Cependant, dans les grès à zéolites, la précipitation d'une phase argileuse est observée dans les chemins d'écoulement et engendre une forte diminution de la perméabilité.
https://tel.archives-ouvertes.fr/tel-00416408

tel-00416408
https://tel.archives-ouvertes.fr/tel-00416408
https://tel.archives-ouvertes.fr/tel-00416408/document
https://tel.archives-ouvertes.fr/tel-00416408/file/These_Luquot.pdf

Éditeur(s) : HAL CCSD Wiley
Résumé : International audience
Three soil DNA extraction procedures (homemade protocols and commercial kit) varying in their practicability were applied to contrasting soils to evaluate their efficiency in recovering: (i) soil DNA and (ii) bacterial diversity estimated by 16S rDNA pyrosequencing. Significant differences in DNA yield were systematically observed between tested procedures. For certain soils, 10 times more DNA was recovered with one protocol than with the others. About 15 000 sequences of 16S rDNA were obtained for each sample which were clustered to draw rarefaction curves. These curves, as well as the PCA ordination of community composition based on OTU clustering, did not reveal any significant difference between procedures. Nevertheless, significant differences between procedures were highlighted by the taxonomic identification of sequences obtained at the phylum to genus levels. Depending on the soil, differences in the number of genera detected ranged from 1% to 26% between the most and least efficient procedures, mainly due to a poorer capacity to recover populations belonging to Actinobacteria, Firmicutes or Crenarchaeota. This study enabled us to rank the relative efficiencies of protocols for their recovery of soil molecular microbial biomass and bacterial diversity and to help choosing an appropriate soil DNA extraction procedure adapted to novel sequencing technologies.
ISSN: 1751-7915

hal-01546177
https://hal.archives-ouvertes.fr/hal-01546177
DOI : 10.1111/j.1751-7915.2011.00307.x

Éditeur(s) : HAL CCSD Elsevier
Résumé : Handheld energy dispersive portable X-ray spectrometers (pXRF) are generally designed and used for qualitative survey applications. We developed shipboard quantitative analysis protocols for pXRF and employed the instrument to make over 2000 individual abundance measurements for a selection of major and trace elements on over 1200 m of recovered core during the eight weeks of the International Ocean Discovery Program (IODP) Expedition 352 to the Izu-Bonin forearc. pXRF analytical performance, accuracy and precision were found to be the same on powdered rock samples and on freshly cut rock surfaces, and sample results were similar within error to measurements made via shipboard ICP-OES analysis save at low abundance levels for a few elements. Instrument performance was optimal for elements between Z = 19 and Z = 40, and the system yielded reproducible data for K, Ca, Ti, V, Cr, Mn, Fe, Cu, Zn, Rb, Sr, and Zr on both powdered samples and rock surfaces. Working curves developed via pXRF measurement of a suite of geologic standard reference materials and well-characterized lavas permitted accurate quantitative measurements for many of the examined elements on both sample powders and rock surfaces. Although pXRF has been sporadically employed on previous cruises, Expedition 352 is the first time a detailed, high-density chemostratigraphy of recovered core samples was collected using pXRF measurements of rock core surfaces. These high-resolution data allowed the recognition of chemically distinct eruptive units in near real-time. The rapid identification of geochemical trends vastly improved our selection of samples for shipboard and shore-based analysis, permitted a more comprehensive interpretation of our Expedition results, and provided key decision-making information for drilling operations.
ISSN: 0009-2541

hal-01553188
https://hal.archives-ouvertes.fr/hal-01553188
DOI : 10.1016/j.chemgeo.2017.01.007

Éditeur(s) : HAL CCSD BioMed Central
Résumé : International audience
Background: Microbial genetic diversity is often investigated via the comparison of relatively similar 16S molecules through multiple alignments between reference sequences and novel environmental samples using phylogenetic trees, direct BLAST matches, or phylotypes counts. However, are we missing novel lineages in the microbial dark universe by relying on standard phylogenetic and BLAST methods? If so, how can we probe that universe using alternative approaches? We performed a novel type of multi-marker analysis of genetic diversity exploiting the topology of inclusive sequence similarity networks. Results: Our protocol identified 86 ancient gene families, well distributed and rarely transferred across the 3 domains of life, and retrieved their environmental homologs among 10 million predicted ORFs from human gut samples and other metagenomic projects. Numerous highly divergent environmental homologs were observed in gut samples, although the most divergent genes were over-represented in non-gut environments. In our networks, most divergent environmental genes grouped exclusively with uncultured relatives, in maximal cliques. Sequences within these groups were under strong purifying selection and presented a range of genetic variation comparable to that of a prokaryotic domain. Conclusions: Many genes families included environmental homologs that were highly divergent from cultured homologs: in 79 gene families (including 18 ribosomal proteins), Bacteria and Archaea were less divergent than some groups of environmental sequences were to any cultured or viral homologs. Moreover, some groups of environmental homologs branched very deeply in phylogenetic trees of life, when they were not too divergent to be aligned. These results underline how limited our understanding of the most diverse elements of the microbial world remains, and encourage a deeper exploration of natural communities and their genetic resources, hinting at the possibility that still unknown yet major divisions of life have yet to be discovered.
ISSN: 1745-6150

Droits : http://creativecommons.org/licenses/by/
hal-01257771
http://hal.upmc.fr/hal-01257771
http://hal.upmc.fr/hal-01257771/document
http://hal.upmc.fr/hal-01257771/file/s13062-015-0092-3.pdf
DOI : 10.1186/s13062-015-0092-3

Résumé : Les fourmis sont des organismes cibles appropriés pour les études environnementales. Au cours de notre étude, nous nous sommes focalisés sur les fourmis de la litière via l'application de deux méthodes de récolte complémentaires selon le protocole all (ants of leaf litter). Dans les forêts naturelles de Guyane française, l'hétérogénéité environnementale et les perturbations structurent les communautés de fourmis de la litière en influençant la richesse, la diversité, l'abondance et la densité en espèces ainsi que les compositions taxonomique et fonctionnelle. Chaque type de formation végétale possède une communauté spécifique. La fragmentation et la conversion des forêts en plantations ont entrainé une altération plus ou moins profonde des communautés; cette variabilité est fonction du type d’agriculture et des espèces d'essences cultivées. Bien que l'altération des communautés se soit révélée maximale dans la plupart des monocultures, les plantations de cacaoyers ont un potentiel de conservation réel. Enfin, dans un contexte ou il est urgent de simplifier l'intégration des arthropodes dans les études de conservation, de contrôle et de suivi de la santé des écosystèmes terrestres, la méthode des réseaux de neurones est apparue comme un outil puissant pour mettre en évidence et analyser les patrons des communautés de fourmis.
Ants are reliable and relevant target organisms for environmental surveys. In our study, we focused on litter-dwelling ants through the use of two complementary sampling methods that were implemented according to the ants of leaf litter (all) protocol. In pristine forests of french guiana, leaf-litter ant communities are structured by environmental heterogeneity and natural perturbations - which influence species richness, diversity, abundance and density, as well as taxonomic and functional composition. This results in habitat-specific communities for each vegetal formation. Forest fragmentation and conversion into monocultures have led to a more or less deep alteration of the ant communities; this variability depends on the type of agricultural system and cultivated tree species. Although the intensity of community alteration peaked in tree monocultures, cocoa plantation exhibited a real potential for native species conservation. Finally, in the current context where simplifying the integration of arthropods into conservation programs as well as into surveys designed to monitor and manage the environment is critical, the use of neural networks appears to be a powerful tool for reliably highlighting and analyzing ant communities patterns.

http://www.theses.fr/2011AGUY0475/document

Éditeur(s) : HAL CCSD
Résumé : International audience
BackgroundTree above ground biomass (AGB) is currently estimated by tree-level allometrical models that take into account, tree volume estimated from proxy variables of tree size (DBH) and species average wood specific gravity (WSG). These methods are common and realistic from a practical point of view. However, they do not take into account deviance from fixed allometrical trajectories and species or tree level WSG variations. Here, we present Xtrawood software that allows computation of tree AGB according to structure and WSG variations.MethodXtrawood reconstructs tree structure and integrates WSG variations by merging tree structure and WSG data measured at different position in trees, leading to the computation of global AGB and visualization of WSG variation along tree structure. Tree structure is measured according to stem dimensions (length, diameter) and positions within tree, and encoded in Multiscale Tree Graph format (MTG). WSG data is made of radial WSG profiles (1 measure each 0,5 cm from pith to bark) sampled at different heights within whole tree. Xtrawood output are illustrated using a dataset collected on an Amazonian forest ‘biomass dominant species’, Dicorynia guianensis Amsh., also known to exhibit substantial WSG gradients along both radial and vertical axis. 9 trees ranging from 15 to 60 cm DBH were measured by climbers. Each tree was felled and samples were collected at different positions (3 in trunk, 1 to 5 in crown) to record WSG radial profiles.ResultsXtrawood allows computation of tree volume, but also visualization of WSG variations in tree as well as inference of WSG radial profiles at different heights. Output variables are decomposed according to different tree scale and locations (axis, trunk/crown) and easy to extract. Xtrawood results will be compared to those of standard estimation method and can be used to identify positions in trees where WSG value leads to the better estimate of tree AGB.Conclusion/perspectiveXtrawood produces AGB estimate with data from intensive measurements practices. The sampling protocol, used here, remains destructive and time-consuming because Xtrawood is not directly dedicated to forest managers, but to help calibration of realistic sampling strategies. Moreover, Xtrawood offers a way to understand relationships between tree development, WSG variations within tree structure and biomass accumulation in the context of natural forests or plantations. A software demo is available at coffee break.
53rd Annual Meeting of the Association for Tropical Biology and Conservation (ATBC 2016)
Montpellier, France

Droits : http://creativecommons.org/licenses/by/
hal-01349613
https://hal.archives-ouvertes.fr/hal-01349613

Éditeur(s) : Academic Press Ltd- Elsevier Science Ltd
Résumé : Ensuring the sustainability of fish resources necessitates understanding their interaction with coastal habitats, which is becoming ever more challenging in the context of ever increasing anthropogenic pressures. The ability of coastal lagoons, exposed to major sources of disturbance, to provide resources and suitable habitats for growth and survival of juvenile fish is especially important. We analysed three lagoons with different ecological statuses and habitat quality on the basis of their eutrophication and ecotoxicity (Trix test) levels. Fish abundances were sampled using fishing and horizontal beaming acoustic surveys with the same protocols in the same year. The relative abundance of Anguilla anguilla, Dicentrarchus labrax or the Mugilidae group was not an indicator of habitat quality, whereas Atherina boyeri and Sparus aurata appeared to be more sensitive to habitat quality. Fish abundance was higher in the two lagoons with high eutrophication and ecotoxicity levels than in the less impacted lagoon, while fish sizes were significantly higher in the two most severely impacted lagoons. This leads us to suggest low habitat quality may increase fish growth rate (by the mean of a cascading effect), but may reduce lagoon juvenile abundance by increasing larval mortality. Such a hypothesis needs to be further validated using greater investigations which take into account more influences on fish growth and recruitment in such variable environments under complex multi-stressor conditions.
Estuarine Coastal And Shelf Science (0272-7714) (Academic Press Ltd- Elsevier Science Ltd), 2013-07 , Vol. 126 , P. 1-6

Droits : 2013 Elsevier Ltd. All rights reserved
http://archimer.ifremer.fr/doc/00148/25963/24083.pdf
DOI:10.1016/j.ecss.2013.03.011
http://archimer.ifremer.fr/doc/00148/25963/

Éditeur(s) : HAL CCSD Public Library of Science
Résumé : 51 pages; 15figures; 3 tables, accepted for publication in PloS ONE
International audience
We present a study about AFM imaging of living, moving or self-immobilized, bacteria in their genuine physiological liquid medium. No external immobilization protocol, neither chemical nor mechanical, was needed. For the first time, the native gliding movements of Gram-negative Nostoc cyanobacteria upon the surface, at speeds up to 900microns/h, were studied by AFM. This was possible thanks to an improved combination of a gentle sample preparation process and an AFM procedure based on fast and complete force-distance curves made at every pixel, drastically reducing lateral forces. No limitation in spatial resolution or imaging rate was detected. Gram-positive and non-motile R. wratislaviensis bacteria were studied as well. From the approach curves, Young modulus and turgor pressure were measured for both strains at different gliding speeds and are ranging from 20±3 to 105±5MPa and 40±5 to 310±30kPa depending on the bacterium and the gliding speed. For Nostoc, spatially limited zones with higher values of stiffness were observed. The related spatial period is much higher than the mean length of Nostoc nodules. This was explained by an inhomogeneous mechanical activation of nodules in the Nostoc. We also observed the presence of a soft extra cellular matrix (ECM) around the Nostoc. Both strains left a track of polymeric slime with variable thicknesses. For R. wratislaviensis, it is equal to few hundreds of nanometers, likely to promote its adhesion to the sample. While gliding, the Nostoc secretes a slime layer the thickness of which is in the nanometer range and increases with the gliding speed.
ISSN: 1932-6203

hal-00769765
https://hal.archives-ouvertes.fr/hal-00769765
https://hal.archives-ouvertes.fr/hal-00769765v3/document
https://hal.archives-ouvertes.fr/hal-00769765/file/REsubmission_In-situ_determination_Dhahri_Plos_One_R2_Hal.pdf