Éditeur(s) : HAL CCSD American Geophysical Union (AGU)
Résumé : International audience
Observations from deep boreholes at several locations worldwide, laboratory measurements of frictional strength on quartzo-feldspathic materials, and earthquake focal mechanisms indicate that crustal faults are strong (apparent friction μ ≥ 0.6). However, friction experiments on phyllosilicate-rich rocks and some geophysical data have demonstrated that some major faults are considerably weaker. This weakness is commonly considered to be characteristic of mature faults in which rocks are altered by prolonged deformation and fluid-rock interaction (i.e., San Andreas, Zuccale, and Nankai Faults). In contrast, in this study we document fault weakening occurring along a marly shear zone in its infancy (<30 m displacement). Geochemical mass balance calculation and microstructural data show that a massive calcite departure (up to 50 vol %) from the fault rocks facilitated the concentration and reorganization of weak phyllosilicate minerals along the shear surfaces. Friction experiments carried out on intact foliated samples of host marls and fault rocks demonstrated that this structural reorganization lead to a significant fault weakening and that the incipient structure has strength and slip behavior comparable to that of the major weak faults previously documented. These results indicate that some faults, especially those nucleating in lithologies rich of both clays and high-solubility minerals (such as calcite), might experience rapid mineralogical and structural alteration and become weak even in the early stages of their activity.
ISSN: 0278-7407

hal-01211481
https://hal.archives-ouvertes.fr/hal-01211481
DOI : 10.1002/2014TC003716

Éditeur(s) : HAL CCSD Springer/Terra Scientific Publishing Company
Résumé : International audience
We report oil the discovery of magnetite nanoparticles ranging in size from 2 to 14 full in the mineralized zones of the Pena Colorada iron-ore deposit, southern Mexico. Micrometric scale magnetite was magnetically reduced and divided into distinct size ranges: 85-56 mu m, 56-30 mu m, 30-22 mu m, 22-15 mu m, 15-10 mu m, 10-7 mu m and 7-2 mu m. Nanometric-scale magnetite in the size range 2-14 nm was identified. The magnetite was characterized by X-ray diffraction, transmitted and reflected light microscope, high-resolution transmission electron microscopy (TEM), high angle annular dark field, Mossbauer spectroscopy and its magnetic properties. Crystallographic identification of nanostructures Was performed using high-resolution TEM. Characteristic changes were observed when the particles make the size transition from micro- to nanometric sizes, as follows: (1) frequency-dependent magnetic Susceptibility percentage (chi FD%) measurements Show high Values (13%) for the 2-14 nm fractions attributed to dominant fractions of superparamagnetic particles; (2) variations of chi FD% < 4.5% in fractions of 56-0.2 mu m occur in association with the presence of microparticles formed by magnetite aggregates of nanoparticles (< 15 nm) embedded in berthierine; (3) Mossbauer spectroscopy results identified a superparamagnetic fraction; (4) nanometric and 0.2-3 mu m grain size magnetite particles require a magnetic field up to 152 mT to reach saturation during the isothermal remanent magnetization experiment; (5) coercivity and remanent magnetization of the magnetite increase when the particle size decreases, probably due to parallel Coupling effects; (6) two-magnetic Susceptibility versus temperature experiments of the same 2-14 nm sample show that the reversibility during the second heating is due to the formation of new magnetite nanoparticles and growth of those already present. during the first heating process.
ISSN: 1343-8832

hal-00413053
https://hal.archives-ouvertes.fr/hal-00413053

Éditeur(s) : Amer Geophysical Union
Résumé : Large rivers are key hydrologic components in oceanography, particularly regarding air-sea and land-sea exchanges and biogeochemistry. We enter now in a new era of Sea Surface Salinity (SSS) observing system from Space with the recent launches of the ESA Soil Moisture and Ocean Salinity (SMOS) and the NASA Aquarius/Sac-D missions. With these new sensors, we are now in an excellent position to revisit SSS and ocean color investigations in the tropical northwest Atlantic using multi-year remote sensing time series and concurrent in situ observations. The Amazon is the world's largest river in terms of discharge. In its plume, SSS and upper water column optical properties such as the absorption coefficient of colored detrital matter (acdm) are strongly negatively correlated (<-0.7). Local quasi-linear relationships between SSS and acdm are derived for these plume waters over the period of 2010-2013 using new spaceborne SSS and ocean color measurements. Results allow unprecedented spatial and temporal resolution of this coupling. These relationships are then used to estimate SSS in the Amazon plume based on ocean color satellite data. This new product is validated against SMOS and in situ data and compared with previously developed SSS retrieval models. We demonstrate the potential to estimate tropical Atlantic SSS for the extended period from 1998 to 2010, prior to spaceborne SSS data collection.
Journal Of Geophysical Research-oceans (0148-0227) (Amer Geophysical Union), 2015-05 , Vol. 120 , N. 5 , P. 3177-3192

Droits : 2015. American Geophysical Union. All Rights Reserved.
http://archimer.ifremer.fr/doc/00255/36610/35742.pdf
DOI:10.1002/2014JC010109
http://archimer.ifremer.fr/doc/00255/36610/

Éditeur(s) : American Geophysical Union
Résumé : [1] Extreme weather events such as tropical cyclones are difficult to observe with conventional means. Satellite-based observations provide essential measurements of key parameters governing tropical cyclones. They are critical for short-term forecasting. Radiometers onboard the Defense Meteorological Satellite Program satellite series, WindSat and Tropical Rainfall Measuring Mission satellites, scatterometers onboard the ERS, ADEOS, and QuikScat satellites offer unprecedented synoptic observations of surface wind and atmospheric liquid water content, revealing the storm structures with good accuracy. However, satellite estimates do not provide direct measurements of geophysical parameters and can suffer from limitations linked to the sensors characteristics, such as the signal wavelength and polarization or the measurement incidence angle. For example, measurements at Ku band are strongly affected by rain. Still, each observing system can offer specific information that can be combined with the others. In particular, we highlight the capabilities of dual-frequency altimeter to provide very high resolution measurements of rain rate, surface wind speed, and wave characteristics. A method is proposed to obtain continuous along-track 5 km resolution measurements of these parameters in the tropical cyclone Isabel. The results shows that dual-frequency altimeters can provide useful information to complement and validate the operational fields provided by the atmospheric numerical models and by NOAA observing systems.
Journal of Geophysical Union - Research C - Oceans (0148-0227) (American Geophysical Union), 2006 , Vol. 111 , N. C1 , P. NIL_38-NIL_50

Droits : 2006 American Geophysical Union
http://archimer.ifremer.fr/doc/2006/publication-1033.pdf
DOI:10.1029/2005JC003068
http://archimer.ifremer.fr/doc/00000/1033/

Éditeur(s) : HAL CCSD IOP Publishing
Résumé : The 8th International Comparison of Absolute Gravimeters (ICAG2009) took place at the headquarters of the International Bureau of Weights and Measures (BIPM) from September to October 2009. It was the first ICAG organized as a key comparison in the framework of the CIPM Mutual Recognition Arrangement of the International Committee for Weights and Measures (CIPM MRA) (CIPM 1999). ICAG2009 was composed of a Key Comparison (KC) as defined by the CIPM MRA, organized by the Consultative Committee for Mass and Related Quantities (CCM) and designated as CCM.G-K1. Participating gravimeters and their operators came from national metrology institutes (NMIs) or their designated institutes (DIs) as defined by the CIPM MRA. A Pilot Study (PS) was run in parallel in order to include gravimeters and their operators from other institutes which, while not signatories of the CIPM MRA, nevertheless play important roles in international gravimetry measurements. The aim of the CIPM MRA is to have international acceptance of the measurement capabilities of the participating institutes in various fields of metrology. The results of CCM.G-K1 thus constitute an accurate and consistent gravity reference traceable to the SI (International System of Units), which can be used as the global basis for geodetic, geophysical and metrological observations of gravity. The measurements performed afterwards by the KC participants can be referred to the international metrological reference, i.e. they are SI-traceable. The ICAG2009 was complemented by a number of associated measurements: the Relative Gravity Campaign (RGC2009), high-precision levelling and an accurate gravity survey in support of the BIPM watt balance project. The major measurements took place at the BIPM between July and October 2009. Altogether 24 institutes with 22 absolute gravimeters (one of the 22 AGs was ultimately withdrawn) and nine relative gravimeters participated in the ICAG/RGC campaign. This paper is focused on the absolute gravity campaign. We review the history of the ICAGs and present the organization, data processing and the final results of the ICAG2009. After almost thirty years of hosting eight successive ICAGs, the CIPM decided to transfer the responsibility for piloting the future ICAGs to NMIs, although maintaining a supervisory role through its Consultative Committee for Mass and Related Quantities.
ISSN: 0026-1394

hal-00795520
https://hal.archives-ouvertes.fr/hal-00795520
DOI : 10.1088/0026-1394/49/6/666

Éditeur(s) : IEEE
Résumé : This paper aims at studying the quality of the sea surface salinity (SSS) retrieved from soil moisture and ocean salinity (SMOS) data in coastal areas. These areas are characterized by strong and variable SSS gradients [several practical salinity units (psu) on relatively small scales: the extent of river plumes is highly variable, typically at kilometric and daily scales. Monitoring this variability from SMOS measurements is particularly challenging because of their resolution (typically 30-100 km) and because of the contamination by the nearby land. A set of academic tests was conducted with a linear coastline and constant geophysical parameters, and more realistic tests were conducted over the Bay of Biscay. The bias of the retrieved SSS has been analyzed, as well as the root mean square (rms) of the bias, and the retrieved SSS compared to a numerical hydrodynamic model in the semirealistic case. The academic study showed that the Blackman apodization window provides the best compromise in terms of magnitude and fluctuations of the bias of the retrieved SSS. Whatever the type of vegetation cover, a strong negative bias, greater than 1 psu, was found when nearer than 36 km from the coast. Between 44 and 80 km, the type of vegetation cover has an impact of less than a factor 2 on the bias, and no influence further than 80 km from the coast. The semirealistic study conducted in the Bay of Biscay showed a bias over ten days lower than 0.2 psu for distances greater than 47 km, due to an averaging over various geometries (coastline orientation, swath orientation, etc.). The bias showed a weak dependence on the location of the grid point within the swath. Despite the noise on the retrieved SSS, contrasts due to the plume of the Loire River and the Gironde estuary remained detectable on ten-day averaged maps with an rms of 0.57 psu. Finally, imposing thresholds on the major axis of the measurements brought little improvement to the bias, whereas it increased the rms and- could lead to strong swath restriction: a 49-km threshold on the major axis resulted in an effective swath of 800-900 km instead of 1200 km. NOT CONTROLLED OCR
Transactions on geoscience an remote sensing IEEE (0196-2892) (IEEE), 2007-07 , Vol. 45 , N. 7 , P. 2061-2072

Droits : 2007 IEEE
http://archimer.ifremer.fr/doc/2007/publication-3643.pdf
DOI:10.1109/TGRS.2007.894934
http://archimer.ifremer.fr/doc/00000/3643/

Éditeur(s) : HAL CCSD Oxford University Press (OUP)
Résumé : International audience
Advances in groundwater storage monitoring are crucial for water resource management and hydrological processes understanding. The evaluation of water storage changes (WSC) often involve point measurements (observation wells, moisture probes, etc.), which may be inappropriate in heterogeneous media. Over the past few years, there has been an increasing interest in the use of gravimetry for hydrological studies. In the framework of the GHYRAF (Gravity and Hydrology inAfrica) project, 3 yr of repeated absolute gravity measurements using a FG5-type gravimeter have been undertaken at Nalohou, a Sudanian site in northern Benin. Hydrological data are collected within the long-term observing system AMMA-Catch. Once corrected for solid earth tides, ocean loading, air pressure effects, polar motion contribution and non-local hydrology, seasonal gravity variations reach up to 11 μGal, equivalent to a WSC of 260-mm thick infinite layer of water. Absolute temporal gravity data are compared to WSC deduced from neutron probe and water-table variations through a direct modelling approach. First, we use neutronic measurements available for the whole vertical profile where WSC occur (the vadose zone and a shallow unconfined aquifer). The RMSD between observed and modelled gravity variations is 1.61 μGal, which falls within the error bars of the absolute gravity data. Second, to acknowledge for the spatial variability of aquifer properties, we use a 2-D model for specific yield (Sy) derived from resistivity mapping and Magnetic Resonance Soundings (MRS). The latter provides a water content (θMRS) known to be higher than the specific yield. Hence, we scaled the 2-D model of θMRS with a single factor (α). WSC are calculated from water-table monitoring in the aquifer layer and neutronic measurements in the vadose layer. The value of α is obtained with aMonte-Carlo sampling approach, minimizing the RMSD between modelled and observed gravity variations. This leads to α = Sy/θMRS = 0.63 ± 0.15, close to what is found in the literature on the basis of pumping tests experiments, with a RMSD value of 0.94 μGal. This hydrogeophysical experiment is a first step towards the use of time-lapse gravity data as an integrative tool to monitor interannual WSC even in complicated subsurface distribution.
ISSN: 0956-540X

hal-00821181
https://hal.archives-ouvertes.fr/hal-00821181
DOI : 10.1093/gji/ggt146

Éditeur(s) : HAL CCSD Integrated Ocean Drilling Program
Résumé : In this report we present the results of laboratory measurements carried out to explore the electrical properties of gabbroic and troctolitic samples from Integrated Ocean Drilling Program (IODP) Hole U1309D in the Atlantis Massif, an oceanic core complex located at 30°N on the Mid-Atlantic Ridge. Oceanic core complexes are presumably localized in portions of heterogeneous oceanic crust that are relatively rich in igneous rocks and are the locus of significant hydrothermal activity. Electrical properties of igneous rocks are used to discuss the rocks' porosity structure as a function of mineralogy, alteration processes, and deformation. Electrical properties of the gabbroic suites sampled during IODP Expedition 304/305 can contribute to the understanding of these processes in the Atlantis Massif. We present the full suite of electrical data together with density and porosity measurements on the same suite of samples.
ISSN: 1930-1014

hal-00464179
https://hal.archives-ouvertes.fr/hal-00464179
DOI : 10.2204/iodp.proc.304305.204.2009

Éditeur(s) : HAL CCSD Oxford University Press (OUP)
Résumé : International audience
Previous work has demonstrated that geoelectrical measurements, acquired either along the Earth’s surface or in boreholes, can be sensitive to the presence of fractures. However, a lack of numerical approaches that are well suited to modelling electric current flow in fractured media prevents us from systematically exploring the links between geoelectrical measurements and fractured rock properties. To address this issue, we present a highly computationally efficient methodology for the numerical simulation of geoelectrical data in 2.5-D in complex fractured domains. Our approach is based upon a discrete-dual-porosity formulation, whereby the fractures and rock matrix are treated separately and coupled through the exchange of electric current between them. We first validate our methodology against standard analytical and finite-element solutions. Subsequent use of the approach to simulate geoelectrical data for a variety of different fracture configurations demonstrates the sensitivity of these data to important parameters such as the fracture density, depth, and orientation.
ISSN: 0956-540X

hal-01622151
https://hal.archives-ouvertes.fr/hal-01622151
https://hal.archives-ouvertes.fr/hal-01622151/document
https://hal.archives-ouvertes.fr/hal-01622151/file/sanzGJI2017.pdf
DOI : 10.1093/gji/ggx080

Éditeur(s) : HAL CCSD American Association of Petroleum Geologists
Résumé : International audience
We describe the structure, microstructure, and petrophysical properties of fault rocks from two normal fault zones formed in low-porosity turbiditic arkosic sandstones, in deep diagenesis conditions similar to those of deeply buried reservoirs. These fault rocks are characterized by a foliated fabric and quartz-calcite sealed veins, which formation resulted from the combination of the (1) pressure solution of quartz, (2) intense fracturing sealed by quartz and calcite cements, and (3) neoformation of synkinematic white micas derived from the alteration of feldspars and chlorite. Fluid inclusion microthermometry in quartz and calcite cements demonstrates fault activity at temperatures of 195degC to 268degC. Permeability measurements on plugs oriented parallel with the principal axes of the finite strain ellipsoid show that the Y axis (parallel with the foliation and veins) is the direction of highest permeability in the foliated sandstone (10-2 md for Y against 10-3 md for X, Z, and the protolith, measured at a confining pressure of 20 bars). Microstructural observations document the localization of the preferential fluid path between the phyllosilicate particles forming the foliation. Hence, the direction of highest permeability in these fault rocks would be parallel with the fault and subhorizontal, that is, perpendicular to the slickenlines representing the local slip direction on the fault surface. We suggest that a similar relationship between kinematic markers and fault rock permeability anisotropy may be found in other fault zone types (reverse or strike-slip) affecting feldspar-rich lithologies in deep diagenesis conditions.
ISSN: 0149-1423

hal-00903428
https://hal.archives-ouvertes.fr/hal-00903428
DOI : 10.1306/03071312127

Éditeur(s) : HAL CCSD Oxford University Press (OUP)
Résumé : Approximately 4 yr of campaign and continuous Global Positioning System (GPS) measurements across the Dead Sea fault system (DSFS) in Lebanon provide direct measurements of interseismic strain accumulation along a 200-km-long restraining bend in this continental transform fault. Late Cenozoic transpression within this restraining bend has maintained more than 3000 m of topography in the Mount Lebanon and Anti-Lebanon ranges. The GPS velocity field indicates 4-5 mm yr(-1) of relative plate motion is transferred through the restraining bend to the northern continuation of the DSFS in northwestern Syria. Near-field GPS velocities are generally parallel to the major, left-lateral strike-slip faults, suggesting that much of the expected convergence across the restraining bend is likely accommodated by different structures beyond the aperture of the GPS network (e.g. offshore Lebanon and, possibly, the Palmyride fold belt in SW Syria). Hence, these geodetic results suggest a partitioning of crustal deformation involving strike-slip displacements in the interior of the restraining bend, and crustal shortening in the outer part of the restraining bend. Within the uncertainties, the GPS-based rates of fault slip compare well with Holocene-averaged estimates of slip along the two principal strike-slip faults: the Yammouneh and Serghaya faults. Of these two faults, more slip occurs on the Yammouneh fault, which constitutes the primary plate boundary structure between the Arabia and Sinai plates. Hence, the Yammouneh fault is the structural linkage that transfers slip to the northern part of the transform in northwestern Syria. From the perspective of the regional earthquake hazard, the Yammouneh fault is presently locked and accumulating interseismic strain.
ISSN: 0956-540X

hal-00406620
https://hal.archives-ouvertes.fr/hal-00406620
DOI : 10.1111/j.1365-246X.2006.03328.x

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The complex electrical impedance of a garnet-biotite-sillimanite residual enclave in the Neogene dacite of El Hoyazo (SE Spain) has been determined up to 978 °C at 200-300 MPa. This well studied material represents a direct sampling of the Alborán Domain thinned lower crust undergoing partial melting. The paragenesis is garnet + biotite + sillimanite + plagioclase + graphite ± cordierite coexisting with widespread (~ 10 wt.%) rhyolitic melt occurring as inclusions and interstitial glass and developed during regional anatexis at 850 ± 50 °C and 500-700 MPa. The samples were used in cyclic measurements consisting in heating-cooling ramps at progressively higher maximum temperature to observe the effect of reactions on conductivity. In the first cycle up to 850 °C at 2-3 kbar, re-melting of the interstitial glass is achieved with no additional reactions and logarithmic conductivity (S/m) is up to − 1.5. At T > 950 °C new melt with orthopyroxene + ilmenite is produced from biotite partial breakdown and the logarithmic conductivity (S/m) is up to − 0.7. Application of mixing models as Hashin-Shtrikman bounds or Archie's Law, shows that once interconnected, melt controls the electrical conductivity of the enclave. The electrical conductivity of the rock can be simulated with the electrical conductivity data obtained on the starting Matrix glass of the enclave and with the new melt. Our experimental results obtained on a graphitic metasedimentary material evidence show that graphite does not contribute to the conductivity enhancement and that the electrical anomaly observed below the Betics can be explained as effect of partial melting of a residual crust. Comparison with previous works on mafic granulites shows that similar conductivity values can be achieved both by melting of a residual felsic crust or by melting of mafic materials and suggests that pelitic rocks can be more common at deep levels than expected.
ISSN: 0040-1951

hal-00823063
https://hal.archives-ouvertes.fr/hal-00823063
DOI : 10.1016/j.tecto.2012.11.003

Éditeur(s) : HAL CCSD
Résumé : This thesis has been conducted on a fractured crystalline basement located in Ploemeur (South of Brittany, France). The detailed study of this basement requires a good understanding of their internal structures, namely their intrinsic properties, flow mode, density and fractures distribution. This work is focused on the petrophysical characterization of the granitic formations. Physical properties were determined from downhole geophysical measurements and images, and petrophysical measurements with thin sections made for each mini-core in the laboratory. Fresh-altered schist and fresh-altered granite separated by a normal angle fault are the main lithology of the Ploemeur crystalline basement. The results showed that the petrophysical properties were function of both porosity variation and degree of alteration and that the pore-space topology was found to be porositydependent. This thesis introduces a new formula between electrical resistivity and porosity. In addition, the laboratory measurements of Ploemeur revealed that seismic wave velocity was a function not only of porosity, but also of the predominant pore type. In general, the pore aspect ratio inverted from velocity measurements were classified roughly into crack shape. In the Ploemeur crystalline basement, the downhole geophysical measurements and images were used to measure changes in physical and chemical properties in the borehole fluid and the bedrock surrounding the boreholes. The effective integration of different geophysical methods, hydrogeological tests and lithological description was the best way to characterize the fractures in the crystalline basement, and is critical for a suitable estimation of fluid circulation.
Le socle cristallin fracturé, situé à Ploemeur (Bretagne sud, France) est l'objet de ce travail de thèse. L'étude détaillée du socle nécessite une bonne compréhension de la structure interne, à savoir les propriétés intrinsèques, le mode d'écoulement, la densité et la distribution des fractures. Ce travail de thèse est consacré à la caractérisation pétrophysique des formations granitiques. Les propriétés physiques ont été déterminées à partir de l'interprétation des données de mesures de géophysique en forage, des images de paroi du puits et des mesures pétrophysiques réalisées sur carottes en laboratoire. Afin de replacer les mesures dans leur contexte lithologique, une lame mince a été analysée pour chaque mini-carotte. Les formations lithologiques rencontrées dans le socle cristallin de Ploemeur sont des schistes et granites sains et altérés, ces deux lithologies étant séparées par une zone de faille. Les résultats ont montré que les propriétés pétrophysiques des roches étaient fonction à la fois de la variation de la porosité et du degré d'altération des roches et que la topologie de l'espace poreux était fortement dépendante de la porosité. Cette thèse introduit une nouvelle formule entre la résistivité électrique et la porosité. De plus, les mesures en laboratoire sur les échantillons de Ploemeur révèlent que les vitesses sismiques ne sont pas seulement fonction de la quantité de porosité, mais aussi fonction de facteur de forme. Ce dernier a été calculé sur les échantillons du socle de Ploemeur à partir des vitesses acoustiques. Les résultats ont montré que la porosité est de forme fissurale. L'intégration des données issues des images optiques et acoustiques, des mesures de géophysique en forage, et de la description des carottes a permis d'étudier de façon détaillée la géologie et l'hydrodynamique du socle de Ploemeur. L'intégration effective de ces différentes méthodes avec les tests hydrogéologiques ressort comme la meilleure façon de caractériser les fractures et les circulations en eau dans le socle.
https://tel.archives-ouvertes.fr/tel-00444175

Droits : info:eu-repo/semantics/OpenAccess
tel-00444175
https://tel.archives-ouvertes.fr/tel-00444175
https://tel.archives-ouvertes.fr/tel-00444175/document
https://tel.archives-ouvertes.fr/tel-00444175/file/thesebelghoul.pdf

Éditeur(s) : HAL CCSD Elsevier
Résumé : Reliable measurements of the intensity of the palaeomagnetic field are notoriously difficult to obtain. The approach generally taken is to produce multiple estimates per rock unit and assume that those which meet certain minimum standards of technical quality will combine to produce an accurate mean. However, here, using results produced from a package of 20th century basaltic lava flows from Mount Etna in Sicily, we demonstrate that this approach can fail. In this case, the application of typical sets of selection criteria actually introduces bias into the mean determination that we measure. We demonstrate that this is caused by two types of non-ideal behaviour acting in combination. The first is a result of the multidomain grains that the samples contain and the second is caused by differences in the natural and laboratory cooling rates. We discuss means of avoiding these sources of error in future palaeointensity studies performed on ancient rocks. We also develop a new, more general reliability criterion which is effective here and which we argue should be applied wherever possible in future palaeointensity studies in conjunction with standard criteria. It requires two distinct types of materials which both produce some good-quality palaeointensity measurements and uses their range of overlap to constrain the true palaeointensity. Both the application of this criterion and general reliability considerations require that future palaeointensity studies should measure many samples per cooling unit and that these should be as diverse in terms of their rock magnetic properties and cooling histories as possible.
ISSN: 0012-821X

hal-00407943
https://hal.archives-ouvertes.fr/hal-00407943
DOI : 10.1016/j.epsl.2007.03.017

Éditeur(s) : HAL CCSD
Résumé : Karstic aquifers represent the most important fresh water reservoirs in many regions of the world like the Mediterranean Basin. However, because of complex processes of karstification, those aquifers are highly heterogeneous at all spatial scales and vulnerable to contamination. In this dissertation, we studied the potential of gravimetry and ambient seismic noise for hydrological modeling in karstic areas.The dolomitic area surrounding the “GEK” observatory in the Durzon catchment on the Larzac plateau, in France, is the preferred site for these studies. Inside the observatory, a superconducting gravimeter dedicated to hydrology has continuously measured gravity changes since 2011 with high precision, undertaken for the first time on a karst. From this gravity monitoring, we made conceptual hydrological models which laid the foundation of 1-D flow physical models. Indeed, gravimetry is an integrative hydro-geophysical method which allows 1) to consider the epikarst, locally heterogeneous as an equivalent tabular medium and 2) to define the types of transfer (fast & slow) occurring at the site. Especially, the lack of fast transfer through the GEK epikarst was precisely quantified for the first time at the field scale (~100m). Gravity-driven water mass balance with local meteorological data (evapotranspiration from a flux tower and precipitation) allowed setting the bottom outlet of the model to 1 mm.day-1. This flow has proved to be representative of the low-flow discharge at the only spring which represents all groundwater outflows from the catchment. This result supposes the homogeneity of the dolomitic epikarst almost at the basin scale. Model parameters were next calibrated using one year of ambient seismic noise monitored at two stations. Phase velocity changes obtained by cross-correlating the noise between 6 and 8 Hz were used as a ”timer” to follow the water infiltration between a depth of 30 and 60 meters. Thus, monitoring seismic velocity changes using ambient seismic noise demonstrates great potential for the study of deep and complex critical zones and could fill the instrumental gap currently existing in hydrology.Time-lapse gravity measurements with a spring-based portable gravimeter have also demonstrated the different behavior of two epikarsts and their variability at the scale of a few hundred meters. Monthly measurements around the observatory revealed the spatial homogeneity of this dolomitic epikarst: all the stations showed the same water storage changes. On the contrary, seasonal surface to depth gravity measurements along the underground passage of the Saint-Ferréol sinkhole, in limestone, have shown fast transfer and strong spatial variability of water storage. Lithology is then expected to play a part in the epikarst capacity to retain water. The precision needed to measure the weak hydrological induced signals during those surveys required robust methodology and an ambient temperature effect on measurements with spring-based gravimeter was observed in the field and quantified in the laboratory.
Les aquifères karstiques représentent des ressources en eau essentielles dans de nombreuses régions du monde comme le bassin Méditerranéen. Cependant, de par les processus complexes de karstification, ces aquifères sont hétérogènes à de nombreuses échelles et vulnérables. Dans cette thèse, nous étudions le potentiel de la gravimétrie et du bruit sismique ambiant pour la modélisation hydrologique en milieu karstique.Le site dolomitique de l’observatoire « GEK », sur le bassin du Durzon dans le Larzac, est le site d’étude privilégié de ces travaux. Dans l’observatoire, un gravimètre supraconducteur dédié à l’hydrologie mesure depuis 2011 les variations de gravité en continu et à une très haute précision, pour la première fois sur un karst. Des modèles hydrologiques conceptuels ont été réalisés à partir de cette surveillance gravimétrique et ont permis de poser les bases de modèles physiques d’écoulements 1-D. En effet la gravimétrie, intégratrice, permet 1) de considérer l’épikarst localement hétérogène comme un milieu tabulaire équivalent et 2) de définir les types de transfert à l’œuvre sur le site. En particulier, l’absence de transfert rapide dans l’épikarst a été quantifiée avec précision pour la première fois à l’échelle du terrain (~100m). A l’aide de données météorologiques locales, un bilan de masse précis a permis de définir le flux en limite inférieure du modèle à 1 mm.jour-1. Ce flux s’est montré représentatif du débit de basses-eaux de la source drainant l’ensemble du bassin. Ce résultat suppose une homogénéité de l’épikarst dolomitique quasiment à l’échelle du bassin. Les paramètres des modèles physiques ont ensuite pu être calibrés à l’aide d’un an d’intercorrélation du bruit sismique ambiant entre deux stations. Les variations de vitesses de phase obtenues entre 6 et 8Hz nous ont servi de « chronomètre » pour suivre l’infiltration entre 30 et 60m de profondeur. La surveillance passive des variations de vitesses sismiques par intercorrélation du bruit sismique ambiant montre ainsi un fort potentiel pour l’étude des zones critiques profondes et complexes à l’échelle du terrain et peut combler la lacune instrumentale qui existe actuellement en hydrologie.Des campagnes répétées de mesures avec un gravimètre portable à ressort ont également mis en évidence le fonctionnement différent de deux épikarsts et leur variabilité à l’échelle de la centaine de mètres. Des mesures mensuelles autour de l’observatoire ont mis en évidence l’homogénéité spatiale de cet épikarst dolomitique : toutes les stations ont les mêmes variations temporelles de stock d’eau. Au contraire, des mesures saisonnières en surface et en profondeur le long de la galerie souterraine calcaire de l’abîme de Saint-Ferréol ont montré une variabilité spatiale forte du stockage ainsi que du transfert rapide. La lithologie de l’épikarst est donc suspectée de jouer un rôle dans sa capacité de stockage. Lors de ces campagnes, la faiblesse du signal recherché a nécessité une méthodologie précautionneuse et un effet de température sur les mesures des gravimètres relatifs à ressort a été observé sur le terrain et quantifié en laboratoire.
https://tel.archives-ouvertes.fr/tel-01649606

NNT : 2016MONTT128
tel-01649606
https://tel.archives-ouvertes.fr/tel-01649606
https://tel.archives-ouvertes.fr/tel-01649606/document
https://tel.archives-ouvertes.fr/tel-01649606/file/2016_FORES_archivage.pdf

Éditeur(s) : HAL CCSD
Résumé : The presence of biological matter (biofilms) in deep geological sites for storage of, for instance, toxic elements or groundwater in aquifers was clearly proved. That biomass triggers physical and chemical processes which greatly modify the durability and the sustainability of the sites. These processes, mainly from oxidative/reductive reactions, are poorly understood. This is mainly due to the fact that former studies were done at the macroscopic level far away from the micrometric scale where relevant processes induced by bacteria take place. Investigations at microscopic level are needed. Thus, we developed an experimental set-up based on the combined use of optical microscopy (transmission), atomic force microscopy (AFM) and electrical and electro-chemical AFM microscopy (EC_AFM) in order to get simultaneous information on topographic and electro-chemical processes. The first highly sensitive step was to use AFM with biological samples in liquid environment: wepresent here a study about AFM imaging of living, moving or self-immobilized bacteria, in their genuine physiological liquid medium and in true in vivo conditions. No external immobilization protocol, neither chemical nor mechanical was needed. For the first time, the native gliding movements of Gram negative Nostoc cyanobacteria upon the surface were studied by AFM. AFM height and mechanical stiffness data were simultaneously acquired. From these, mechanical parameters, inner turgor pressure and Young modulus, were derived for different bacterial species (Anabaenopsis circularis, Rhodococcus wratislaviensis). Our study revealed that AFM imaging is thus possible on moving living species. These results open a large window on new studies of both dynamical phenomena of practical and fundamental interests such as the formation of biofilms and dynamic properties of bacteria in real physiological conditions. The second delicate step was to combine AFM and optical measurements with electrical ones. We mounted a new experimental set-up coupling real-time (i) monitoring of optical properties as the optical density (OD) evolution related to bulk bacterial growth in liquid or as the counting of number of bacteria adhering on the surface of the sample as well and (ii) electrical and electrochemical measurements. Furthermore, these results will shortly be applied to the optimized monitoring of the in-situ activity of bacteria consuming oil pollutants, following this way, in real-time, the bioremediation of an oilcontaminated soil (ANR ECOTECH_BIOPHY program).
La présence de matière biologique (biofilms) dans les sites de stockage géologique profond, d'éléments toxiques ou encore de l'eau potable des aquifères est maintenant clairement démontrée. Cette biomasse est à l'origine de processus physiques et chimiques qui modifient considérablement la durabilité et la pérennité des sites concernés. Ces processus, principalement de type oxydo-réductif, sont encore mal compris. Ceci est principalement dû aux méthodes d'investigation, principalement macroscopiques, loin de l'échelle micrométrique caractéristique des bactéries. Seules des études, basées sur des méthodes d'investigation locale, peuvent apporter les informations requises. Ainsi, nous avons développé un dispositif expérimental basé sur l'utilisation combinée de la microscopie optique (en transmission), la microscopie à force atomique (AFM) et la microscopie AFM en mode électrique et électrochimique (EC_AFM) afin d'obtenir des informations simultanées sur la topographie de l'échantillon et sur les processus électrochimiques à l'échelle des bactéries. La première étape sensible consistait à utiliser l'AFM sur des échantillons biologiques en milieu liquide: nous présentons ici les résultats de l'imagerie AFM en milieu liquide de plusieurs types de bactéries dans leurs conditions physiologiques naturelles (conditions in vivo). Aucun protocole d'immobilisation, ni chimique ni mécanique, n'a été nécessaire; et pour la première fois, les mouvements de reptation de cyanobactéries Nostoc ont été étudiés par l'AFM. Les études AFM ont permis d'acquérir des données topographiques mais aussi mécaniques : nous avons pu ainsi mesurer le module d'Young, la pression de turgescence de différentes souches bactériennes (Anabaenopsis circularis, Rhodococcus wratislaviensis). Cette étude complète, a révélé que l'imagerie AFM est donc possible sur des espèces vivantes en mouvement. Ces résultats ouvrent une grande fenêtre sur de nouvelles études d'intérêts tels que la formation de biofilms et les propriétés dynamiques de bactéries dans des conditions physiologiques réelles. La deuxième étape délicate était de combiner l'AFM aux mesures optiques et électriques. Nous avons développé un nouveau dispositif expérimental permettant (i) le suivi de l'évolution de la croissance bactérienne par la mesure des propriétés optiques comme la densité optique DO (pour le développement bactérien en volume - milieu planctonique) , ou l'analyse de l'image du substrat par comptage du nombre de bactéries sur la surface de l'échantillon (biofilm), et (ii) les mesures électriques et électrochimiques. L'ensemble de ces résultats sera prochainement appliqué au développement de nouveaux outils de surveillance d'une biodépollution de terrain contaminé par les hydrocarbures, par le suivi in situ et en temps réel de l'activité de bactéries dépolluantes (ECOTECH_BIOPHY ANR).
https://tel.archives-ouvertes.fr/tel-01044714

tel-01044714
https://tel.archives-ouvertes.fr/tel-01044714
https://tel.archives-ouvertes.fr/tel-01044714/document
https://tel.archives-ouvertes.fr/tel-01044714/file/theseDhahri2013.pdf

Éditeur(s) : HAL CCSD American Association of Petroleum Geologists
Résumé : In reservoir engineering, hydrodynamic properties can be estimated from downhole electrical data using heuristic models (e.g., Archie and Kozeny-Carman's equations) relating electrical conductivity to porosity and permeability. Although proven to be predictive for many sandstone reservoirs, the models mostly fail when applied to carbonate reservoirs that generally display extremely complex pore network structures. In this article, we investigate the control of the three-dimensional (3-D) geometry and morphology of the pore network on the electrical and flow properties, comparing core-scale laboratory measurements and 3-D x-ray microtomography image analysis of samples from a Miocene reefal carbonate platform located in Mallorca (Spain). The results show that micrometer- to centimeter-scale heterogeneities strongly influence the measured macroscopic physical parameters that are then used to evaluate the hydrodynamic properties of the rock, and therefore, existing models might not provide accurate descriptions because these heterogeneities occur at scales smaller than those of the integration volume of the borehole geophysical methods. However, associated with specific data processing, 3-D imagery techniques are a useful and probably unique mean to characterize the rock heterogeneity and, thus, the properties variability.
ISSN: 0149-1423

hal-00950066
https://hal.archives-ouvertes.fr/hal-00950066
DOI : 10.1306/05221312134

Éditeur(s) : HAL CCSD Springer Verlag (Germany) Springer Verlag
Résumé : International audience
Recent mathematical calculations allow us to define set fracture intensity (I), i.e., the amount of rock mass affected by fracture sets, independently of the investigation mode. This parameter, characteristic of each rock mass, is of much interest to describe the mechanical response of the rock mass to external influences. The aim of this work is to apply these mathematical equations on one site using measurements of three distinct fracture sets: (1) on a plane surface, (2) along a scanline, and (3) using borehole imaging, in order to evaluate and explain variability in collected data. Even if the three types of measurements give differences on absolute intensity values, they still define similar trends, i.e., the order of the fracturing impact of joint sets is the same from the three measurement methods, irrespective of the fact that obtained values are quite different from one survey method to another. We discuss the possible origins of these biases.
ISSN: 1435-9529

hal-01121556
https://hal.archives-ouvertes.fr/hal-01121556
DOI : 10.1007/s10064-014-0572-1

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Although subducting slabs undergo a bending deformation that resists tectonic plate motions, the magnitude of this resistance is not known because of poor constraints on slab strength. However, because slab bending slows the relatively rapid motions of oceanic plates, observed plate motions constrain the importance of bending. We estimated the slab pull force and the bending resistance globally for 207 subduction zone transects using new measurements of the bending curvature determined from slab seismicity. Predicting plate motions Using a global mantle flow model, we constrain the viscosity of the bending slab to be at most similar to 300 times more viscous than the upper mantle: stronger slabs are intolerably slowed by the bending deformation. Weaker slabs, however, cannot transmit a pull force sufficient to explain rapid trenchward plate motions unless slabs stretch faster than seismically observed rates of similar to 10(-15) s(-1). The constrained bending viscosity (similar to 2 x 10(23) Pa s) is larger than previous estimates that yielded similar or larger bending resistance (here similar to 25% of forces). This apparent discrepancy occurs because slabs bend more gently than previously thought, with an average radius of curvature of 390 km that permits subduction Of Strong slabs. This gentle bending may ultimately permit plate tectonics on Earth.
ISSN: 0012-821X

hal-00412383
https://hal.archives-ouvertes.fr/hal-00412383
DOI : 10.1016/j.epsl.2008.05.009

Éditeur(s) : HAL CCSD Springer Verlag
Résumé : International audience
Over the years, a number of different models and techniques have been proposed to both quantify and explain the glacial isostatic adjustment (GIA) process. There are serious challenges, however, to obtaining accurate results from measurements, due to noise in the data and the long periods of time necessary to identify the relatively small-magnitude signal in certain regions. The primary difficulty, in general, is that most of the geophysical signals that occur in addition to GIA are nonstationary in nature. These signals are also corrupted by random as well as correlated noise added during data acquisition. The nonstationary characteristic of the data makes it difficult for traditional frequency-domain denoising approaches to be effective. Time-frequency filters present a more robust and reliable alternative to deal with this problem. This paper proposes an extended S transform filtering approach to separate the various signals and isolate that associated with GIA. Continuous global positioning system (GPS) data from eastern Canada for the period from June 2001 to June 2006 are analyzed here, and the vertical velocities computed after filtering are consistent with the GIA models put forward by other researchers.
ISSN: 0033-4553

hal-00795451
https://hal.archives-ouvertes.fr/hal-00795451
DOI : 10.1007/s00024-011-0404-1