Éditeur(s) : HAL CCSD Ocean Drilling Programm
Résumé : This paper provides a summary of postcruise scientific results from Ocean Drilling Program (ODP) Leg 209 available to date, building upon shipboard observations and syntheses summarized in the Leg 209 Initial Results volume. During Leg 209, 19 holes were drilled at 8 sites along the Mid-Atlantic Ridge from 14°43´ to 15°44´N, mainly in residual mantle peridotite intruded by gabbroic rocks, in order to understand the tectonic and structural processes responsible for formation of oceanic lithosphere with abundant residual peridotite exposed on the seafloor coupled with a relatively low proportion of volcanic rocks. Based on proportions of recovered lithologies, the entire area may be underlain by mantle peridotite with ~20%–40% gabbroic intrusions and impregnations. Impregnated peridotites with olivine + two pyroxenes + plagioclase + spinel that apparently formed in equilibrium probably record crystallization from primitive mid-ocean-ridge basalt at pressures of 0.5–0.6 GPa. Metamorphic equilibria record isobaric cooling to ~1100°C at this pressure. Thus, the conductively cooled thermal boundary layer beneath the Mid-Atlantic Ridge in this region is >15 km thick. Combined crystallization and reaction with residual peridotite formed a series of impregnated peridotites recording increasing Na content at nearly constant Mg#; this process could explain some of the variation in fractionation-corrected Na (e.g., Na = 8.0) observed in mid-ocean-ridge basalts. Clinopyroxene textures and compositions record such impregnation processes, and they are particularly well documented for Site 1274. Other Leg 209 gabbroic rocks formed from extensive crystallization of highly evolved melts, indicating that a substantial proportion of melt entering the thermal boundary layer crystallizes entirely beneath the seafloor, with no volcanic equivalent. Alteration of peridotites occurred over a range of temperatures and is the result of three distinct processes: rock-dominated serpentinization with formation of brucite in olivine-rich lithologies, fluid-dominated serpentinization with formation of magnetite and no brucite, and fluid-dominated talc alteration with addition of SiO2 as well as H2O and oxygen. The latter two processes also exhibit detectable trace element metasomatism that is distinct in its character from the igneous impregnation described in the previous paragraph. Microstructures show that most residual peridotites were not ductilely deformed at temperatures less than ~1200°C. Structural and paleomagnetic data require tectonic rotations of relatively undeformed blocks; some rotations probably exceeded 60° around nearly horizontal axes parallel to the rift axis. Rotations occurred along several generations of high-temperature mylonitic shear zones extending deeper than 15 km depth and numerous faults at lower temperature. Early formed shear zones and faults were passively rotated around later features; such a process could have produced low-angle fault surfaces without slip on low-angle faults. This region provides end-member examples of processes that are common at many or most slow-spreading ridges. Osmium isotope ratios indicate an ancient history of depletion for residual peridotites from the 14°–16°N region along the Mid-Atlantic Ridge. Though depleted Os isotope ratios in peridotite have been reported elsewhere along the global ridge system, the values from this region are among the most depleted. In general, Os isotope ratios from mid-ocean-ridge basalts are systematically more radiogenic than Os isotope ratios from ridge peridotite samples, suggesting a polygenetic heterogeneous source for mid-ocean-ridge basalts. Geochemical studies of zircons from Leg 209 gabbroic rocks and impregnated peridotites, together with other ridge and arc-related zircons, indicate that ridge zircons have systematically lower fractionation-corrected U and Th concentrations compared to arc zircons. This observation provides a tool for interpreting the tectonic provenance of ancient detrital zircons and indicates an arclike provenance for Hadean detrital zircons. Geobiological studies and aerobiological studies were also undertaken during Leg 209. The geobiological work found no measurable microbial enhancement of olivine dissolution rate, possibly because the samples from Leg 209 were sterile. The aerobiological study determined that dust from North Africa, collected from the derrick of the JOIDES Resolution during Leg 209, contains a variety of abundant microorganisms.
Proceedings ODP, scientific results, 209

hal-00407966
https://hal.archives-ouvertes.fr/hal-00407966
DOI : 10.2973/odp.proc.sr.209.001.2007

Éditeur(s) : Copernicus Gesellschaft Mbh
Résumé : During the GWADASEIS cruise (Lesser Antilles volcanic arc, February-March 2009) a very high resolution (VHR) seismic-reflection survey was performed in order to constrain Late Quaternary to Present faulting. The profiles we obtained evidence frequent "ponding" of reworked sediments in the deepest areas, similar to the deposition of Mediterranean "homogenites". These bodies are acoustically transparent (few ms t.w.t. thick) and are often deposited on the hanging walls of dominantly normal faults, at the base of scarps. Their thickness appears sufficient to compensate (i.e. bury) co-seismic scarps between successive earthquakes, resulting in a flat and horizontal sea floor through time. In a selected area (offshore Montserrat and Nevis islands), piston coring (4 to 7m long) was dedicated to a sedimentological analysis of the most recent of these particular layers. It corresponds to non-stratified homogenous calcareous silty sand (reworked calcareous plankton and minor volcanoclastics). This layer can be up to 2 m thick, and overlies fine-grained hemipelagites. The upper centimeters of the latter represent the normal RedOx water/sediment interface. Pb-210 and Cs-137 activities lack in the massive sands, while a normal profile of unsupported Pb-210 decrease is observed in the hemipelagite below, together with a Cs-137 peak corresponding to the Atmospheric Nuclear Experiments (1962). The RedOx level was thus capped by a recent instantaneous major sedimentary event considered as post-1970 AD; candidate seismic events to explain this sedimentary deposits are either the 16 March 1985 earthquake or the 8 October 1974 one (M-w = 6.3 and M-w = 7.4, respectively). This leads to consider that the syntectonic sedimentation in this area is not continuous but results from accumulation of thick homogenites deposited after the earthquakes (as observed in the following weeks after Haiti January 2010 event, McHugh et al., 2011). The existence of such deposits suggests that, in the area of study, vertical throw likely results from cumulated effects of separated earthquakes rather than from aseismic creep. Examination of VHR profiles shows that all major co-seismic offsets are recorded in the fault growth sequence and that co-seismic offsets can be precisely estimated. By using a sedimentation rate deduced from Pb-210 decrease curve (0.5 mmyr(-1)) and taking into account minor reworking events detected in cores, we show that the Redonda system may have been responsible for five > M-6 events during the last 34 000 yr. The approach presented in this work differs from fault activity analyses using displaced sets of isochronous surfaces and postulating co-seismic offsets. Combining VHR seismic imagery and coring we can decipher co-seismic vs. slow continuous displacement, and thus actually estimate the amplitude and the time distribution of major co-seismic offsets.
Natural Hazards And Earth System Sciences (1561-8633) (Copernicus Gesellschaft Mbh), 2012 , Vol. 12 , N. 5 , P. 1755-1767

Droits : Author(s) 2012. CC Attribution 3.0 License.
http://archimer.ifremer.fr/doc/00089/20040/21990.pdf
DOI:10.5194/nhess-12-1755-2012
http://archimer.ifremer.fr/doc/00089/20040/

Éditeur(s) : Elsevier Science Bv
Résumé : Fluid escape structures on the Nile Deep Sea Fan were investigated during the MEDIFLUX MIMES expedition in 2004. Mud volcanoes, pockmarks and authigenic carbonate structures were surveyed for the first time with a high-resolution deep-towed 75 kHz sidescan sonar and a 2-8 kHz Chirp sediment echosounder. In combination with existing multibeam bathymetry and detailed seafloor in situ geological observations, these new data allowed detailed seep analyses. About 60 gas flares were detected acoustically in the water column from the sidescan sonar raw data at water depths from 770 to 1700 m. These gas flares coincide at the seabed with 1) the centres of the mud volcanoes where mud is also extruded, 2) the borders of the mud volcanoes where the emitted gases contribute to the precipitation of authigenic carbonates, and 3) to the edges of broad sheets of authigenic carbonates. Subsurface sediments are commonly disturbed by ascending fluids throughout the delta, with an abundance of seep-related carbonate structures on the seafloor. The feeder channels below mud volcanoes, similar to the gas conduits below the widespread carbonate crust structures and pockmarks, are relatively narrow and, for the vast majority of them, do not exceed a few metres in diameter. The seeps on the Nile Deep Sea Fan clearly follow lineations on the seafloor that we can relate to faults. (C) 2010 Elsevier B.V. All rights reserved.
Marine Geology (0025-3227) (Elsevier Science Bv), 2010-09 , Vol. 275 , N. 1-4 , P. 1-19

Droits : 2010 Elsevier B.V. All rights reserved.
http://archimer.ifremer.fr/doc/00013/12457/9766.pdf
DOI:10.1016/j.margeo.2010.04.003
http://archimer.ifremer.fr/doc/00013/12457/

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
I use GPS interseismic velocities and classic 2D elastic half-space models with a screw dislocation to estimate the long-term fault slip rate, locking depth, and the offset between the surface fault trace and the location of the dislocation below the seismogenic zone for 13 segments along 8 major strike-slip faults. Using deduced strike-slip rates and the position of the dislocation to normalize the interseismic velocities to facilitate comparison of spatial patterns of deformation, I show that no substantial differences can be detected, ruling out a large asymmetry in interseismic velocities across the 8 faults used in this study. Only the Carrizo Plain segment of the San Andreas Fault shows a significant asymmetry that cannot be explained by shifting the position of the dislocation at depth relative to the fault trace. However, the resulting perturbation is less than 10% of total strike-slip rate. Fault traces are usually curved, defining a concave side. When the dislocation at depth is significantly offset from the fault trace, the shift is always toward the block on the concave side of the fault trace. This suggests that the fault zone in the lower crust may develop a simpler geometry more consistent with relative motion across the fault than its upper seismogenic part constrained by the structural complexity of the brittle crust. Since the faults used in this study are at different times in their interseismic period, comparing the interseismic velocity fields across them allows identification of possible variations of the interseismic velocities with time. When normalized by slip rate and dislocation location, all the faults show the same interseismic strain with no significant differences between deduced locking depths. These comparisons suggest that if temporal variations occur as suggested by some dynamic earthquake cycle models, they are small and below the accuracy of the available geodetic measurements.
ISSN: 0040-1951

hal-01171753
https://hal.archives-ouvertes.fr/hal-01171753
DOI : 10.1016/j.tecto.2015.01.013

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Geodetic data support a short-term continental deformation localized in faults bounding lithospheric blocks. Whether major "faults" observed at the surface affect the lithospheric mantle and, if so, how strain is distributed are major issues for understanding the mechanical behavior of lithospheric plates. A variety of evidence, from direct observations of deformed peridotites in orogenic massifs, ophiolites, and mantle xenoliths to seismic reflectors and seismic anisotropy beneath major fault zones, consistently supports prolongation of major faults into the lithospheric mantle. This review highlights that many aspects of the lithospheric mantle deformation remain however poorly understood. Coupling between deformation in frictional faults in the uppermost crust and localized shearing in the ductile crust and mantle is required to explain the post-seismic deformation, but mantle viscosities deduced from geodetic data and extrapolated from laboratory experiments are only reconciled if temperatures in the shallow lithospheric mantle are high (> 800 °C at the Moho). Seismic anisotropy, especially shear wave splitting, provides strong evidence for coherent deformation over domains several tens of km wide in the lithospheric mantle beneath major transcurrent faults. Yet it cannot detect narrow strain localization zones or shallowly dipping faults. Seismic profiling images shallow-dipping seismic reflectors in the lithospheric mantle interpreted as the continuation of normal or, less frequently, inverse faults in the mantle. However the nature of these reflectors is poorly understood. There is a large discrepancy between the scale at which deformation processes are studied (a few kilometers, at most, due to the limited size of continuous mantle exposures at the Earth's surface) and the scale inferred for strain localization in the mantle from geophysical observations (tens of kilometers). Combining data on deformation microstructures and crystal preferred orientations in naturally deformed peridotites and seismologic observations allows nevertheless discussing strain localization processes that may play a role on the development of mantle shear zones.
ISSN: 0040-1951

hal-00750314
https://hal.archives-ouvertes.fr/hal-00750314
DOI : 10.1016/j.tecto.2012.06.006

Éditeur(s) : HAL CCSD AGU and the Geochemical Society
Résumé : International audience
New magnetotelluric and receiver transfer function studies provide insights from the upper to the lower crust of the eastern Betic Cordillera, which is deformed by large folds, normal faults, and a major transcurrent left-lateral fault, the Carboneras Fault Zone (CFZ). Receiver function analysis determines a NNW dipping Moho reaching 20 degrees that increases in depth, from 20 km south of the CFZ up to 34 km in the Sierra de Los Filabres. In addition, seismic discontinuities determined in the upper crust are interpreted as major contacts between metamorphic complexes that are detached and folded. The MT inversion model reveals a conductive zone, also representing a crustal seismic discontinuity, associated with the Alpujarride/Nevado-Filabride contact and fitting the N vergent geometry of the Sierra Alhamilla antiform. A small flexure at Moho coincides with the CFZ, as revealed by the Bouguer anomaly trend, in agreement with the receiver function results. Moreover, the Bahr strike and tipper angle at the stations placed closest to the CFZ clearly reveal the continuity of the CFZ at least down to approximately 15 km in depth, crossing all the detected crustal discontinuities up to the Moho. The lack of a clear Moho offset associated with the Carboneras Fault supports the idea that some large strike-slip faults tend to accommodate the deformation by a broadening fault zone at lower crustal levels. Its nucleation could occur at the base of a thin crust, where melting processes critically reduced the lithospheric strength during the late Miocene, to then propagate upward, reaching the topographic surface. Northward, the lithosphere comprised moderately larger strength, and the crustal discontinuities favored the development of larger folds with kilometric amplitude instead of strike-slip faults since the late Miocene.
ISSN: 1525-2027

hal-00671024
https://hal.archives-ouvertes.fr/hal-00671024
DOI : 10.1029/2010GC003274

Éditeur(s) : American Geophysical Union
Résumé : We present new high-resolution bathymetry and backscatter data acquired in 2006 with the ROV Victor 6000 over the Lucky Strike hydrothermal field, Mid-Atlantic Ridge. As long-term monitoring of the Lucky Strike area (MoMAR project) is being implemented, these new high-resolution data offer an unprecedented view of the distribution of hydrothermal edifices, eruptive facies, and small-scale tectonic features in the Lucky Strike vent field. We show that vents located in the NW and NE correspond with wide expanses of lumpy seafloor which we interpret as primarily made of broken chimneys and sulfide edifices. They are found above scarps with relief > 50 m or on associated mass wasting deposits. By contrast, the SE and SW vents correspond with small expanses of lumpy seafloor and are located near smaller scarps which we interpret as more recent faults. Hydrothermal edifices in the SW venting area appear very recent, postdating the emplacement and faulting of the most recent lava. We propose that this difference in the age of hydrothermal edifices does not mean that hydrothermal venting itself is more recent in the southern part of the Lucky Strike field because preexisting sulfide deposits there may have been buried by recent volcanic deposits. Instead, the older edifices in the northern part of the hydrothermal field may have been allowed more time to grow because they are set above the level of recent lava flows. The formation of a lava lake is the most recent eruptive event detected at Lucky Strike. Lava drainback is evidenced by benches and lava pillars, suggesting a close connection with an underlying magma reservoir, which probably corresponds to the melt body imaged by Singh et al. (2006). We have found no evidence that this lake was active for months to decades, as lava lakes at terrestrial volcanoes. It may instead have formed as a lava pond, with successive lava flows covering the eruptive vents, as proposed for similar features at the EPR. The horizontal surface of the lake is deformed only near its southwestern shore, along a NNE-trending set of faults and fissures, which appear to control the distribution of hydrothermal chimneys.
Geochemistry Geophysics Geosystems (1525-2027) (American Geophysical Union), 2009-02 , Vol. 10 , N. 2 , P. 1-18

Droits : 2009 American Geophysical Union
http://archimer.ifremer.fr/doc/2009/publication-6161.pdf
DOI:10.1029/2008GC002171
http://archimer.ifremer.fr/doc/00000/6161/

Éditeur(s) : HAL CCSD
Résumé : This work provides new constraints on the development and on the distribution of the deformation in the upper mantle and particularly beneath transform plate boundaries. USArray experiment and the remarkable increase of the dataset in California for the past ten years allowed us to scrutinize the lateral variations of the anisotropy in the vicinity of the San Andreas Fault zone. We have confirmed and increased the detection of two layers of anisotropy beneath this plate boundary. The first layer, located in the lithosphere, is related to the deformation induced at the fault, and the other one, located in the asthenosphere, is coherent with the anisotropy observed far from it, its origin is however less clear. We show that the deformation zone associated both to the San Andreas, Calaveras and Hayward Faults, is likely 40 km wide at 70 km depth. We then performed numerical thermomechanical modeling (ADELI) of the displacement of a transform plate boundary associated with the computation of the development of crystallographic fabrics using a viscoplastic selfconsistent approach (VPSC). We analyzed the distribution of the deformation in the model ant looked after the possible interactions at depth between deformation caused at surface by the strike-slip dynamic of the fault and the shearing at the base of the lithosphere caused by the horizontal displacement of the plates. Elastic properties derived from the crystallographic fabrics modeled, show that such interactions exist and induce, beneath the fault zone, a progressive rotation of the crystallographic fabrics with depth. Seismological signature of these smooth rotations is however not relevant with the presence of two anisotropic layers as proposed beneath California. We thus consider that a decoupling zone exists between the lithosphere and the asthenosphere beneath the California to account for the sharp separation between a lithospheric and an asthenospheric deformation. We furthermore estimate that anisotropy observed far form the San Andreas Fault in California cannot be explained only by the drag of the asthenosphere by the North America lithosphere as proposed in our article. Indeed, we can only expect few tenths of second of splitting delay from the anisotropic properties derived from the numerical modeling of a plate moving in the same direction and in the same velocity than the North American lithosphere only for 10 Ma of displacement. As delays observed in California rather reach 1.5 s, anisotropy in this region thus requires the existence of an active asthenospheric flow to be explained.
Le travail réalisé pendant cette thèse a permis d'apporter de nouvelles contraintes sur le développement et la distribution de la déformation dans le manteau supérieur et plus particulièrement au niveau des grandes limites de plaques décrochantes. Grâce à l'apport de l'expérience USArray et d'une dizaine d'années d'enregistrements sismologiques supplémentaires, nous avons pu étudier, de manière précise, les variations d'anisotropie dans le voisinage de la Faille de San Andreas. Nous avons confirmé et étendu l'observation de deux couches anisotropes sous cette limite de plaque. On y observe une première couche localisée dans la lithosphère marquant la déformation induite à la limite de plaque, et une autre, asthénosphérique, cohérente avec l'anisotropie observée loin de la faille et d'origine plus discutée. Nous avons montré que la zone de déformation associée aux failles de San Andreas, Calaveras et d'Hayward a, vraisemblablement, une largeur d'au moins 40 kilomètres en base de lithosphère, sous chacune de ces failles. Nous avons ensuite procédé à la modélisation thermomécanique (ADELI) de la migration d'une limite de plaques décrochante couplée à une modélisation du développement de fabriques cristallographiques par une approche viscoplastique auto-cohérente (VPSC). Ceci nous a permis d'y observer le développement de la déformation et les conséquences des possibles interactions entre la déformation décrochante en surface et le cisaillement en base de lithosphère dû au déplacement horizontal des plaques. Les propriétés élastiques déduites des fabriques cristallographiques modélisées montrent que de telles interactions existent et provoquent, sous la limite de plaques, une rotation des orientations cristallographiques avec la profondeur. Le signal associé à ces rotations progressives n'est toutefois pas cohérent avec la présence de deux couches d'anisotropie comme proposée sous la faille de San Andreas. Nous pensons par conséquent qu'il existe, sous la Californie, une zone de découplage entre la lithosphère et l'asthénosphère, permettant d'individualiser une déformation lithosphérique d'une déformation asthénosphérique. Nous estimons, en outre, que l'anisotropie observée dans l'asthénosphère sous la Californie ne peut être expliquée seulement par le cisaillement induit par le déplacement de la lithosphère Nord Amérique. En effet, les propriétés anisotropes obtenues par modélisation à partir d'une plaque se déplaçant dans une direction et une vitesse proche de celle de la plaque Amérique du Nord montrent qu'on ne peut espérer guère plus que quelques dixièmes de seconde de délai au bout de 10 Ma de déplacement. Les déphasages mesurés en Californie étant de l'ordre de 1,5 s, il est donc nécessaire d'invoquer la présence d'écoulements mantelliques actifs sous cette région.
https://tel.archives-ouvertes.fr/tel-00767124

tel-00767124
https://tel.archives-ouvertes.fr/tel-00767124
https://tel.archives-ouvertes.fr/tel-00767124/document
https://tel.archives-ouvertes.fr/tel-00767124/file/theseBonnin.pdf

Éditeur(s) : HAL CCSD ACM
Résumé : International audience
Applications over wireless sensor networks are growing quickly. Traditional software development tools are not well adapted to this technology. In particular, adequate testing methodologies are required. Many issues have not been formally addressed as energy-conservation, congestion control, reliability data dissemination, security. In this paper, we present a pragmatic approach to detect some kind of anomalies based on defined scenarios on wireless sensor networks. A scenario is considered as a set of events which should happen on the network in an ordered way. We discuss a formal architecture able to perform these scenarios over the wireless sensor networks and to raise alarms if necessary. This methodology has been implemented on a prototype and has been experimented with various examples. This contribution is a first attempt for a formal testing methodology for wireless sensor networks.
Proceedings of the 6th ACM workshop on QoS and security for wireless and mobile networks

Droits : info:eu-repo/semantics/OpenAccess
hal-00596118
https://hal.archives-ouvertes.fr/hal-00596118
https://hal.archives-ouvertes.fr/hal-00596118/document
https://hal.archives-ouvertes.fr/hal-00596118/file/Q2sWinet_10.pdf
DOI : 10.1145/1868630.1868641

Éditeur(s) : HAL CCSD European Geosciences Union
Résumé : International audience
During the GWADASEIS cruise (Lesser Antilles volcanic arc, February-March 2009) a very high resolution (VHR) seismic-reflection survey was performed in order to constrain Late Quaternary to Present faulting. The profiles we obtained evidence frequent "ponding" of reworked sediments in the deepest areas, similar to the deposition of Mediterranean "homogenites". These bodies are acoustically transparent (few ms t.w.t. thick) and are often deposited on the hanging walls of dominantly normal faults, at the base of scarps. Their thickness appears sufficient to compensate (i.e. bury) co-seismic scarps between successive earthquakes, resulting in a flat and horizontal sea floor through time. In a selected area (offshore Montserrat and Nevis islands), piston coring (4 to 7 m long) was dedicated to a sedimentological analysis of the most recent of these particular layers. It corresponds to non-stratified homogenous calcareous silty sand (reworked calcareous plankton and minor volcanoclastics). This layer can be up to 2 m thick, and overlies finegrained hemipelagites. The upper centimeters of the latter represent the normal RedOx water/sediment interface. 210Pb and 137Cs activities lack in the massive sands, while a normal profile of unsupported 210Pb decrease is observed in the hemipelagite below, together with a 137Cs peak correspond- ing to the Atmospheric Nuclear Experiments (1962). The RedOx level was thus capped by a recent instantaneous major sedimentary event considered as post-1970 AD; candidate seismic events to explain this sedimentary deposits are either the 16 March 1985 earthquake or the 8 October 1974 one (Mw=6.3 and Mw=7.4, respectively). This leads to consider that the syntectonic sedimentation in this area is not continuous but results from accumulation of thick homogenites deposited after the earthquakes (as observed in the following weeks after Haiti January 2010 event, McHugh et al., 2011). The existence of such deposits suggests that, in the area of study, vertical throw likely results from cumulated effects of separated earthquakes rather than from aseismic creep. Examination of VHR profiles shows that all major co-seismic offsets are recorded in the fault growth sequence and that co-seismic offsets can be precisely estimated. By using a sedimentation rate deduced from 210Pb decrease curve (0.5 mm yr−1) and taking into account minor reworking events detected in cores, we show that the Redonda system may have been responsible for five >M6 events during the last 34 000 yr. The approach presented in this work differs from fault activity analyses using displaced sets of isochronous surfaces and postulating co-seismic offsets. Combining VHR seismic imagery and coring we can decipher co-seismic vs. slow continuous displacement, and thus actually estimate the amplitude and the time distribution of major co-seismic offsets.
ISSN: 1561-8633

insu-00844581
https://hal-insu.archives-ouvertes.fr/insu-00844581
https://hal-insu.archives-ouvertes.fr/insu-00844581/document
https://hal-insu.archives-ouvertes.fr/insu-00844581/file/nhess-12-1755-2012.pdf
DOI : 10.5194/nhess-12-1755-2012

Éditeur(s) : HAL CCSD Springer-Verlag
Résumé : International audience
With hull-mounted multibeam echosounder data, wereport for the first time along the active Ecuadorian margin,acoustic signatures of water column fluid emissions and seep-relatedstructures on the seafloor. In total 17 flare-shaped acousticanomalies were detected from the upper slope (1250 m) to the shelfbreak (140 m). Nearly half of the flare-shaped acoustic anomaliesrise 200–500 m above the seafloor. The base of the flares is generallyassociated with high-reflectivity backscatter patchescontrasting with the neighboring seafloor. We interpret these flaresas caused by fluid escape in the water column, most likely gases.High-resolution seismic profiles show that most flares occur closeto the surface expression of active faults, deformed areas, slopeinstabilities or diapiric structures. In two areas tectonic deformationdisrupts a Bottom Simulating Reflector (BSR), suggesting thatburied frozen gas hydrates are destabilized, thus supplying free gasemissions and related flares. This discovery is important as it opensthe way to determine the nature and origin of the emitted fluids andtheir potential link with the hydrocarbon system of the forearcbasins along the Ecuadorian margin.
ISSN: 0033-4533

insu-01267238
https://hal-insu.archives-ouvertes.fr/insu-01267238
DOI : 10.1007/s00024-015-1230-7

Éditeur(s) : HAL CCSD Copernicus Publications on behalf of the European Geosciences Union
Résumé : International audience
During the GWADASEIS cruise (Lesser Antilles volcanic arc, February–March 2009) a very high resolution (VHR) seismic-reflection survey was performed in order to constrain Late Quaternary to Present faulting. The profiles we obtained evidence frequent " ponding " of reworked sediments in the deepest areas, similar to the deposition of Mediterranean " homogenites ". These bodies are acoustically transparent (few ms t.w.t. thick) and are often deposited on the hanging walls of dominantly normal faults, at the base of scarps. Their thickness appears sufficient to compensate (i.e. bury) co-seismic scarps between successive earthquakes, resulting in a flat and horizontal sea floor through time. In a selected area (offshore Montserrat and Nevis islands), piston coring (4 to 7 m long) was dedicated to a sedimento-logical analysis of the most recent of these particular layers. It corresponds to non-stratified homogenous calcareous silty sand (reworked calcareous plankton and minor volcanoclas-tics). This layer can be up to 2 m thick, and overlies fine-grained hemipelagites. The upper centimeters of the latter represent the normal RedOx water/sediment interface. 210 Pb and 137 Cs activities lack in the massive sands, while a normal profile of unsupported 210 Pb decrease is observed in the hemipelagite below, together with a 137 Cs peak corresponding to the Atmospheric Nuclear Experiments (1962). The RedOx level was thus capped by a recent instantaneous major sedimentary event considered as post-1970 AD; candidate seismic events to explain this sedimentary deposits are either the 16 March 1985 earthquake or the 8 October 1974 one (M w = 6.3 and M w = 7.4, respectively). This leads to consider that the syntectonic sedimentation in this area is not continuous but results from accumulation of thick homogen-ites deposited after the earthquakes (as observed in the following weeks after Haiti January 2010 event, McHugh et al., 2011). The existence of such deposits suggests that, in the area of study, vertical throw likely results from cu-mulated effects of separated earthquakes rather than from aseismic creep. Examination of VHR profiles shows that all major co-seismic offsets are recorded in the fault growth sequence and that co-seismic offsets can be precisely estimated. By using a sedimentation rate deduced from 210 Pb decrease curve (0.5 mm yr −1) and taking into account minor reworking events detected in cores, we show that the Redonda system may have been responsible for five > M 6 events during the last 34 000 yr. The approach presented in this work differs from fault activity analyses using displaced sets of isochronous surfaces and postulating co-seismic offsets. Combining VHR seismic imagery and coring we can decipher co-seismic vs. slow continuous displacement, and thus actually estimate the amplitude and the time distribution of major co-seismic offsets.
Natural Hazards and Earth System Science

insu-01585969
https://hal-insu.archives-ouvertes.fr/insu-01585969
https://hal-insu.archives-ouvertes.fr/insu-01585969/document
https://hal-insu.archives-ouvertes.fr/insu-01585969/file/nhess-12-1755-2012-beck.pdf
DOI : 10.5194/nhess-12-1755-2012

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
In Taiwan, about one third of the lithospheric plate convergence between Eurasia and the Philippine Sea plate is accommodated on the eastern coast across the narrow Longitudinal Valley (LV). The Longitudinal Valley Fault (LVF) is the main seismically active fault zone in this region. However, the spatial distribution of ground deformation due to interseismic loading on locked fault segments remains widely unknown. To address this problem, we use a "permanent scatterer" (PS) interferometric synthetic aperture radar (InSAR) approach for processing the ERS satellite archives. The PS mean velocity maps allow accurately mapping and quantifying the ground deformation all along the LV. Assuming that, close to the surface, the fault plane along the central LVF creeping segment dips 55 degrees to the east, we derive a slip vector at the surface of similar to 25 mm/yr with a mean rake of 70 degrees. In agreement with our PS observations, shallow seismicity indicates a clear change in the fault mechanical behavior of the creeping segment around Fuli town. Finally, we propose a combination of the PS velocity fields for estimating a 3-D map of ground deformation. In the southern part of the LV, the vertical component reveals an uplift of the Coastal Range with respect to the LV of similar to 10 mm/yr. Moreover, between Taitung and Luyeh, the vertical deformation is essentially accommodated along the Luyeh Strand. Finally, north of Rueisuei, the Coastal Range uniformly subsides at similar to 15 mm/yr relative to the western side of the LV. However, a local uplift pattern is detected around latitude 23 degrees 42'.
ISSN: 0148-0227

hal-00595532
https://hal.archives-ouvertes.fr/hal-00595532
DOI : 10.1029/2010JB007898

Éditeur(s) : HAL CCSD
Résumé : poster
International audience
Locations for earthquake recorded in the Lesser Antilles subduction zone are processed separately by regional observatories, NEIC and ISC. There is no earthquake location catalog available compiling all available phase arrival data. We propose a new best complete earthquake catalog by merging all available phase arrival data for better constrains on earthquake locations. ISC provides the phase arrival data of 29243 earthquakes (magnitude range from 1.4 to 6.4) recorded by PRSN (Porto Rico), SRC (British West Indies), and from FUNVISIS (Venezuela). We add phases data from IPGP observatories for 68718 earthquakes from magnitudes 0.1 to 7.5 (OVSG, Guadeloupe, recorded 53226 earthquakes since 1981, and OVSM, Martinique, recorded 29931 earthquakes since 1972). IPGP also provides the accelerometer waveform data of the GIS-RAP network. We achieved automatic picking on the GIS-RAP data using the Component Energy Correlation Method. The CECM provides high precision phase detection, a realistic estimation of picking error and realistic weights that can be used with manual pick weights. The CECM add an average of 3 P-waves and 2 S-waves arrivals to 3846 earthquakes recorded by the GIS-RAP network since 2002. The final catalog contains 84979 earthquakes between 1972 and 2013, 24528 of which we compiled additional data. We achieve earthquake location using NonLinLoc, regional P and S waves data and a set of one dimensional velocity models. We produce improved locations for 22974 earthquakes (better residuals, on equal or larger arrival dataset) and improved duration magnitudes for 6258 earthquakes (using duration data and improved locations). A subset of best constrained 15626 hypocenters (with more than 8 phases and an average RMS of 0.48_0.77s) could be used for structural analysis and earthquake local tomography. Relative locations are to be applied in order to image active faulting. We aim to understand coupling in the seismogenic zone as well as triggering mechanisms of intermediate depth seismicity like fluid migration beneath the volcanic arc.
Geophysical Research Abstracts
Vienne, Austria

hal-01059207
https://hal-brgm.archives-ouvertes.fr/hal-01059207

Éditeur(s) : HAL CCSD Springer-Verlag
Résumé : International audience
High-resolution borehole strainmeters are usually installed in tectonically active regions in order to detect slow-slip events, and to estimate slow transients related to earthquake swarms. However, they are also sensitive to other numerous influences, internal or external. Furthermore, the quality of their coupling to the rock through cementation, and the mechanical properties of the rock mass around them, have a critical influence on their records. Many of the existing strainmeters present such problems, and the correction for these effects often remains a challenge. In this paper, we present the analysis of the records of a high-resolution borehole dilatometer (Sacks–Evertson), located in the seismically active rift of Corinth (Greece) (station TRZ in the Trizonia island). We show that the instrument suffers from an only partial-solid coupling, and that the nearby sea tides have a direct (through elastic response) and indirect (through pore-pressure diffusion) effect on the dilatation signal, which adds up to the solid tidal strain source. We propose a methodology that allows, in a first step, to better separate the internal (solid tide) from the external (air pressure, sea level) influences, by calculating a frequency-dependent transfer function outside the range of the tidal periods. We then extrapolate this function, in particular at the tidal periods. In a second step, the resulting variation with frequency of the coupling coefficients with sea level led us to estimate the proportion of instrument not solidly cemented to rock (thus in contact with water pore pressure), which is about 90 % of the total height. Despite the small proportion of solid coupling, the sensor resolution remains very good up to a few tens of hours of a time period, thanks to the confining effects of the rocks on the local pore pressure. These results allow us to correct for the external effects, and reduce the associated variance by 80–90 % (in the period range of minutes to days). The empirical correction of the sea level effect could be explained using a simple Boussinesq’s approximation and 1D pore-pressure diffusion model, which contributed to better constraint of some of the poro-elastic parameters in the vicinity of the instrument. After correction, the solid tidal signal at the 24-h period is almost anti-correlated with those of the theoretical solid tide. This surprising result is consistent with a similar anti-correlation observed for the longest period surface waves (200 s) comparing the TRZ dilatometer signals to the strain measured by a nearby borehole strainmeter (MOK, 15 km). This could be related to the presence of a shallow fault close to the instrument, which would creep in response to seismic wave-related stress.
ISSN: 0033-4533

hal-01122853
https://hal.archives-ouvertes.fr/hal-01122853
DOI : 10.1007/s00024-013-0742-2

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
We have analyzed shear wave splitting recorded by portable and permanent broadband and long-period stations located in the eastern United States. Teleseismic shear waves (SKS, SKKS, and PKS) were used to retrieve the splitting parameters: the orientation of the fast wave polarization plane ϕ and the delay time δt. In total, 120 seismic events were processed, allowing for more than 600 splitting measurements. Within the Appalachians, stations located in the western (external) part are characterized by δt≈1s and ϕ trending N50°– 70°E in the south and central regions and N30°–40°E in the north, closely following the trend of the orogenic belt in these areas. The transition region between north and central is characterized by δt≈1–1.3 s and by E-W trending ϕ that are at a high angle to the regional geologic trend. Measurements at two stations located in the eastern (internal) part of the belt indicate very weak anisotropy. The large-scale pattern of anisotropy is not consistent with that predicted for simple asthenospheric flow beneath the plate. Splitting along the southern and eastern margins of the continent is consistent with that expected for Grenvillian deformation, an alternative model of asthenospheric flow around the cratonic keel cannot be ruled out. Within the cratonic core, the correlation between δt and lithospheric thickness suggests a lithospheric anisotropy. Smaller-length-scale variations also argue for a significant contribution of lithospheric structures. The fabric responsible for shear wave splitting may have formed during tectonic episodes that affected the eastern United States, i.e., the Grenville and Appalachian orogenies and the subsequent rifting of the North Atlantic Ocean. Our observations in the western Appalachians suggest that the anisotropy may be preserved since the Grenvillian orogeny. The absence of detectable splitting in the two stations in the eastern Appalachians is attributed to the igneous intrusions related to the Atlantic rifting. The measurements in the transition between the northern and central southern Appalachians, constitute an intriguing anomaly, whose E-W ϕ have little obvious relation to the regional surface geology. We suggest two possible causes: (1) the local dominance of asthenospheric flow, motivated by the proximity of a pervasive low-velocity anomaly and (2) lithospheric deformation in a transcontinental strike-slip fault zone active during the Appalachian collision.
ISSN: 2169-9313

hal-01388859
http://hal.univ-reunion.fr/hal-01388859
http://hal.univ-reunion.fr/hal-01388859/document
http://hal.univ-reunion.fr/hal-01388859/file/Barruol_JGR_1997.pdf
DOI : 10.1029/96JB03800