Éditeur(s) : HAL CCSD
Résumé : Geothermal energy is considered as a green and infinite energy source at human scale. Currently, the yield of geothermal power plants is limited to temperatures of the operating fluid which 350 °C. From tectonic and volcanic activity at mid-ocean ridges, Iceland is a location where supercritical fluid extraction (T> 375 °C) can considered for the near future. Exploiting such fluids could theoretically multiply by a factor of ten the electrical power delivered by geothermal wells. Can such fluids circulate at the base of brittle oceanic crust? This work investigates the petrophysical properties of basalts in order to constrain geophysical observations in Iceland and predict the behavior of very high temperature geo-hydrothermal reservoirs. The first approach consisted in studying the physical properties of rocks that have hosted deep hydrothermal circulations at oceanic ridges. The study of these rocks at ODP Site 1256 shows that the porosity measured both in the field and in the lab is associated with amphibolite facies alteration minerals (T> 500 ° C). The second approach was to recreate in the laboratory the conditions of pressure, temperature and pore fluid pressure of high temperature to supercritical hydrothermal systems to predict the mechanical and electrical properties of basalts under these conditions. The mechanical results indicate that the brittle/ductile transition occurs at a temperature of about 550° C, where a strong permeability decrease is expected. The implementation and calibration of a new cell for measuring electrical conductivity at high temperature provide the first results for the interpretation of geophysical data. When applied to basaltic crustal conditions in Iceland, these results indicate that hydrothermal fluids could circulate, at least temporarily, in a supercritical state up to 5 km depth.
La géothermie est considérée comme une source d'énergie propre et inépuisable à échelle humaine. Actuellement, le rendement des centrales géothermiques est limité à l'exploitation de fluides de températures inférieures à 350 °C. L'association de l'activité tectonique et volcanique aux dorsales océaniques fait de l'Islande un lieu où l'extraction de fluides supercritiques (T> 375 °C) peut être envisagée. Cette exploitation pourrait multiplier par dix la puissance électrique délivrée par le système géothermal. Ces fluides peuvent-ils circuler dans la croûte océanique ? Ce travail propose de contraindre les observations géophysiques et de prédire le fonctionnement des réservoirs géo-hydrothermaux de très haute température par l'étude des propriétés physiques des basaltes. La première approche est focalisée sur l'étude de roches ayant accueilli une circulation hydrothermale par le passé. L'étude de ces roches au site ODP 1256, montre que leur porosité est associée à la présence de minéraux d'altération hydrothermale du facies amphibolite (T> 500 °C). La seconde approche a consisté à recréer, en laboratoire, les conditions des systèmes hydrothermaux, à très haute température, afin de prédire les propriétés mécaniques et électriques des basaltes dans ces conditions. Les résultats mécaniques indiquent que la transition fragile/ductile, souvent associée à une forte décroissance de perméabilité, intervient à une température d'environ 550 °C. La mise en place d'une cellule de mesure de la conductivité électrique de haute température a fourni les premiers résultats utiles à l'analyse des données géophysiques. Appliqués aux conditions de la croûte basaltique Islandaise, ces résultats indiquent que des fluides hydrothermaux pourraient circuler au moins transitoirement à l'état supercritique jusqu'à ~ 5 km de profondeur.
https://tel.archives-ouvertes.fr/tel-00591798

tel-00591798
https://tel.archives-ouvertes.fr/tel-00591798
https://tel.archives-ouvertes.fr/tel-00591798/document
https://tel.archives-ouvertes.fr/tel-00591798/file/THESE_MV_pro.pdf

Éditeur(s) : HAL CCSD
Résumé : The Restefond fault, located in the Late Eocene-Early Oligocene Alpine foreland basin, affects the well lithified and low porosity Grès d'Annot. The fault core zone is characterized by the occurrence of highly deformed sandstone lenses. Deformation inside the lenses corresponds to mm to sub-mm-spaced cleavage planes rich in phyllosilicates and up to cm-thick and dm-long quartz-calcite pure extensional veins. The cleavages are mostly composed of newly-formed synkinematic white mica and chlorite. By using thermodynamic thermometers based on the chemical composition of chlorite, a temperature of 200 ± 20 °C of fault activity was computed. This temperature shows that the Restefond fault was active at burial conditions comprised between 6.5 and 8 km, assuming a mean geothermal gradient between 25 and 30 °Ckm−1. The petrophysic properties of sandstones from the core zone and in the hanging and foot wall of the fault were determined on drilled plugs following three spacial directions. The permeability of the highly deformed sandstone from the core zone is about one order of magnitude higher than in the host rock. This increase in permeability occurs in the direction parallel to the S-C structures and is explained by the occurrence of well-connected micropores localized between platy phyllosilicates. This study shows that the fault petrophysic properties are mostly controlled by the precipitation of synkinematic phyllosilicates under deep burial conditions.
Swiss Journal of Geosciences

hal-00795551
https://hal.archives-ouvertes.fr/hal-00795551
DOI : 10.1007/s00015-012-0099-z

Éditeur(s) : HAL CCSD American Association of Petroleum Geologists
Résumé : International audience
We describe the structure, microstructure, and petrophysical properties of fault rocks from two normal fault zones formed in low-porosity turbiditic arkosic sandstones, in deep diagenesis conditions similar to those of deeply buried reservoirs. These fault rocks are characterized by a foliated fabric and quartz-calcite sealed veins, which formation resulted from the combination of the (1) pressure solution of quartz, (2) intense fracturing sealed by quartz and calcite cements, and (3) neoformation of synkinematic white micas derived from the alteration of feldspars and chlorite. Fluid inclusion microthermometry in quartz and calcite cements demonstrates fault activity at temperatures of 195degC to 268degC. Permeability measurements on plugs oriented parallel with the principal axes of the finite strain ellipsoid show that the Y axis (parallel with the foliation and veins) is the direction of highest permeability in the foliated sandstone (10-2 md for Y against 10-3 md for X, Z, and the protolith, measured at a confining pressure of 20 bars). Microstructural observations document the localization of the preferential fluid path between the phyllosilicate particles forming the foliation. Hence, the direction of highest permeability in these fault rocks would be parallel with the fault and subhorizontal, that is, perpendicular to the slickenlines representing the local slip direction on the fault surface. We suggest that a similar relationship between kinematic markers and fault rock permeability anisotropy may be found in other fault zone types (reverse or strike-slip) affecting feldspar-rich lithologies in deep diagenesis conditions.
ISSN: 0149-1423

hal-00903428
https://hal.archives-ouvertes.fr/hal-00903428
DOI : 10.1306/03071312127

Éditeur(s) : HAL CCSD
Résumé : This thesis has been conducted on a fractured crystalline basement located in Ploemeur (South of Brittany, France). The detailed study of this basement requires a good understanding of their internal structures, namely their intrinsic properties, flow mode, density and fractures distribution. This work is focused on the petrophysical characterization of the granitic formations. Physical properties were determined from downhole geophysical measurements and images, and petrophysical measurements with thin sections made for each mini-core in the laboratory. Fresh-altered schist and fresh-altered granite separated by a normal angle fault are the main lithology of the Ploemeur crystalline basement. The results showed that the petrophysical properties were function of both porosity variation and degree of alteration and that the pore-space topology was found to be porositydependent. This thesis introduces a new formula between electrical resistivity and porosity. In addition, the laboratory measurements of Ploemeur revealed that seismic wave velocity was a function not only of porosity, but also of the predominant pore type. In general, the pore aspect ratio inverted from velocity measurements were classified roughly into crack shape. In the Ploemeur crystalline basement, the downhole geophysical measurements and images were used to measure changes in physical and chemical properties in the borehole fluid and the bedrock surrounding the boreholes. The effective integration of different geophysical methods, hydrogeological tests and lithological description was the best way to characterize the fractures in the crystalline basement, and is critical for a suitable estimation of fluid circulation.
Le socle cristallin fracturé, situé à Ploemeur (Bretagne sud, France) est l'objet de ce travail de thèse. L'étude détaillée du socle nécessite une bonne compréhension de la structure interne, à savoir les propriétés intrinsèques, le mode d'écoulement, la densité et la distribution des fractures. Ce travail de thèse est consacré à la caractérisation pétrophysique des formations granitiques. Les propriétés physiques ont été déterminées à partir de l'interprétation des données de mesures de géophysique en forage, des images de paroi du puits et des mesures pétrophysiques réalisées sur carottes en laboratoire. Afin de replacer les mesures dans leur contexte lithologique, une lame mince a été analysée pour chaque mini-carotte. Les formations lithologiques rencontrées dans le socle cristallin de Ploemeur sont des schistes et granites sains et altérés, ces deux lithologies étant séparées par une zone de faille. Les résultats ont montré que les propriétés pétrophysiques des roches étaient fonction à la fois de la variation de la porosité et du degré d'altération des roches et que la topologie de l'espace poreux était fortement dépendante de la porosité. Cette thèse introduit une nouvelle formule entre la résistivité électrique et la porosité. De plus, les mesures en laboratoire sur les échantillons de Ploemeur révèlent que les vitesses sismiques ne sont pas seulement fonction de la quantité de porosité, mais aussi fonction de facteur de forme. Ce dernier a été calculé sur les échantillons du socle de Ploemeur à partir des vitesses acoustiques. Les résultats ont montré que la porosité est de forme fissurale. L'intégration des données issues des images optiques et acoustiques, des mesures de géophysique en forage, et de la description des carottes a permis d'étudier de façon détaillée la géologie et l'hydrodynamique du socle de Ploemeur. L'intégration effective de ces différentes méthodes avec les tests hydrogéologiques ressort comme la meilleure façon de caractériser les fractures et les circulations en eau dans le socle.
https://tel.archives-ouvertes.fr/tel-00444175

Droits : info:eu-repo/semantics/OpenAccess
tel-00444175
https://tel.archives-ouvertes.fr/tel-00444175
https://tel.archives-ouvertes.fr/tel-00444175/document
https://tel.archives-ouvertes.fr/tel-00444175/file/thesebelghoul.pdf

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
ODP (Ocean Drilling Program)/IODP (Integrated Ocean Drilling Program) Site 1256 is located on the Cocos Plate in the Eastern Equatorial Pacific Ocean, in a 15 Ma old oceanic lithosphere formed at the EPR during a period of superfast spreading (>200 mm/yr). ODP/IODP Hole 1256D reached for the first time the contact between sheeted dikes and underlying gabbros. It consequently offers a unique opportunity to study in situ, in present-day oceanic crust, the root zone of the sheeted dike complex. This root zone is a thin, 100 m thick boundary layer between the magmatic system (i.e., the axial melt lens, similar to 1100 degrees C), and the overlying high temperature hydrothermal system (<= 450 degrees C). The understanding of interactions within this boundary layer is critical to that of crustal processes along mid-ocean ridges.;This work focuses on the petrophysical characterization of the root zone of the sheeted dike complex in order to further constrain the hydrothermal circulation system in the vicinity of the axial melt lens, as recorded in non-granoblastic dikes, granoblastic dikes, and varitextured gabbros. The petrophysical properties were determined from sample measurements in the laboratory and were compared to in situ downhole geophysical probing. The porosity structure is bipolar, depending on lithology, resulting in a layered system. Non-granoblastic dikes are generally altered in the greenschist fades (similar to>250 degrees C) with relatively high and interconnected (cementation index m similar to 1.72, electrical tortuosity tau similar to 28.3) porosity (1.5%). In contrast, gabbros are retrogressively metamorphosed in the amphibolite (similar to>450 degrees C) and greenschist facies, with lower porosity (1.3%) that involves numerous fissures and cracks, resulting in a more connected medium (m similar to 1.58, tau similar to 11.8) than non-granoblastic dikes. These cracks are more abundant but also tend to close with increasing depth as indicated in downhole geophysical data. Porosity and alteration, as viewed from surface electrical conductivity, appear to be directly correlated.
ISSN: 0040-1951

hal-00544556
https://hal.archives-ouvertes.fr/hal-00544556
DOI : 10.1016/j.tecto.2010.07.013

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
During the early years of the Iceland Deep Drilling Project (IDDP), development of three distinctive technological and scientific approaches were formalised and then carried out until 2010 within a European funded project called HiTI (high temperature instruments for supercritical geothermal reservoir characterisation and exploitation). These approaches were: (1) development of several downhole instruments allowing them to function up to 300 ◦C and 400 ◦C, (2) identification of two new Na/Li cation ratio geothermometric relationships valid at very high temperature, (3) tracer testing with high temperature tolerant organic isomers and finally and (4) basalt rock deformation and petrophysical properties laboratory investigations at high temperature and pressure conditions.
ISSN: 0375-6505

hal-00921127
https://hal-brgm.archives-ouvertes.fr/hal-00921127
DOI : 10.1016/j.geothermics.2013.07.008

Éditeur(s) : HAL CCSD
Résumé : The heterogeneous nature and sometimes karstified carbonate environments has a direct impact on many environmental issues, such as coastal aquifers affected by saltwater intrusion. At the south of the island of Mallorca (Spain), the Llucmajor carbonate platform offers a privileged site for the study of such intrusions including the experimental site of Campos who meets the intrusion at shallow depth. The characterization of heterogeneous properties passes through a preliminary description of the properties of carbonate reservoirs, including those of the porosity. According to the wide range of sizes of heterogeneities from micrometer to hundreds of meters, the use of multiscale methods is required. This thesis focused on the determination of multiscale porosities from the microporosity to karstic porosity, and of relationships between observation scale changes of these properties. At the micron scale, high-resolution X-ray microtomography allows to extract the microporosity and the microporous network connectivity. At lower resolution (mm), X-ray tomography is also used to study the micro- and macro-porous network at the core scale which is already allocated to number of observations and measurements, including petrophysical. At the borehole scale, the wall images are used to identify the dissolved zones from centimeter macropores to plurimetric karstic cavities. At the larger scale, surface geophysics study the lateral extension of the karsts and heterogeneities. Finally, the porous structure of the studied site is integrated with its wide range of scales into the regional geology of the Llucmajor platform. Thus, the hydrogeophysical observatory set up on the site of Campos to monitor the spreading of salt water in the aquifer is integrated in its geological and petrophysical context, in order to refine the interpretation of its variations of salinity measurements during the time.
La nature hétérogène et parfois karstifiée des milieux carbonatés a un impact direct sur nombre de problématiques environnementales, comme celle des aquifères côtiers affectés par une intrusion d'eau salée. Au sud de l'ile de Majorque (Baléares, Espagne), la plate-forme carbonatée de Llucmajor offre un site privilégié pour l'étude de telles intrusions notamment avec le site expérimental de Campos, qui rencontre l'intrusion à faible profondeur. La caractérisation des propriétés hétérogènes du réservoir passe par une description préalable des propriétés des réservoirs carbonatés et notamment celle de la porosité. Au regard de la large gamme d'échelles d'hétérogénéités allant du micromètre à la centaine de mètre, l'utilisation de méthodes multi-échelles est nécessaire. Ce travail de thèse a porté sur la caractérisation multi-échelle de la porosité, allant de la microporosité à la porosité karstique, et l'établissement de relations entre les changements d'échelles d'observation de ces propriétés. A très petite échelle, la microtomographie haute-résolution à rayons X extrait à l'échelle du micron la microporosité et la connectivité des réseaux microporeux. A plus basse fréquence (celle du mm), la tomographie est également utilisée afin d'étudier le réseau micro- et macroporeux à l'échelle des carottes, à laquelle sont réalisées nombre d'observations et de mesures, notamment pétrophysiques. A l'échelle du puits, les images de paroi permettent d'identifier les zones de dissolution allant des macropores centimétriques aux cavités karstiques plurimétriques. A plus grande échelle, la géophysique de surface permet d'étudier l'extension latérale de ces karsts et hétérogénéités. Enfin, la structure poreuse du site étudié sur cette vaste gamme d'échelles est intégrée à la géologie régionale de la plate-forme de Llucmajor. Ainsi, l'observatoire installé sur le site pour surveiller la propagation de l'eau salée dans l'aquifère a pu être replacé dans son contexte géologique et pétrophysique, afin d'affiner l'interprétation de ses mesures de variations de salinité au cours du temps.
https://tel.archives-ouvertes.fr/tel-00633488

tel-00633488
https://tel.archives-ouvertes.fr/tel-00633488
https://tel.archives-ouvertes.fr/tel-00633488/document
https://tel.archives-ouvertes.fr/tel-00633488/file/TheseHebert.pdf

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
From outcrops located in Provence (South-East France), we describe the distribution, the microstructures, and the petrophysical properties of deformation band networks related to both contractional and extensional tectonic events. In contraction, pervasively distributed networks of reverse-sense compactional shear bands are observed in all folded sand units of the foreland, whereas localized networks of clustered reverse-sense shear bands are only observed close to a large-scale thrust. In extensional setting, networks of clustered normal-sense shear bands are generally observed adjacent to map-scale faults (100 m–10 km scale), although some randomly distributed bands are also observed between these faults. Normal-sense cataclastic faults, i.e. zone of deformation bands containing a localized slip-surface, are also observed to be restricted to sand units, suggesting that faults initiated in the sands during extension, but not during contraction. Shear bands and faults show cataclastic microstructures with high-permeability reduction whereas compactional shear bands show crush microbreccia or protocataclastic microstructures with moderate permeability reduction. This basin-scale analysis underlines the major role of tectonic settings (thrust-fault versus normal-fault andersonian-stress regime) and the influence of inherited large-scale faults on the formation/localization of low-permeability shear bands. We also provide a geometrical analysis of the band network properties (spacing, thickness, shear/compaction ratio, degree of cataclasis, petrophysical properties) with respect to the median grain size, porosity and grain sorting of host sand. This analysis suggests that grain size, although less important than stress-state conditions and the presence of large-scale faults, has a non-negligible effect on band network geometry. No correlations are observed between the grain sorting, porosity and band network geometry.
ISSN: 0264-8172

hal-01116421
https://hal.archives-ouvertes.fr/hal-01116421
DOI : 10.1016/j.marpetgeo.2013.12.020

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Thermal diffusivity of synthetic quartz single-crystals and natural polycrystalline aggregates were measured using a modified Angstrom method at ambient pressure and up to 800 degrees C in order to investigate the effect of crystal preferred orientation on thermal diffusivity of quartz rich rocks. The thermal diffusivity tensor of quartz was determined by measuring the thermal diffusivity of an oriented synthetic quartz single-crystal along the [100] and [001] directions. A naturally deformed, fine-grained quartzite mylonite, was used to compare the single crystal properties with aggregate properties. Using the crystal preferred orientations (CPO) measured by the Electron Back Scattered Diffraction (EBSD) method and the measured thermal diffusivity tensor of quartz, the three-dimensional aggregate thermal diffusivity was modelled using volume averaging models. In order to test the validity of these models that are only based on the properties of the constituent minerals, the thermal diffusivity was then measured on oriented cores as a function of temperature, along three orthogonal directions, parallel to the (X-lineation, Y, Z-pole to foliation) structural frame. Both modelled and direct measurement of thermal diffusivity show an anisotropy of thermal diffusivity, heat transport being more effective parallel to Y-direction and less effective parallel to the lineation X-direction. Thermal diffusivities measured in a given direction on the natural rock are lower by less than 10% than the modelled thermal diffusivity in the same direction, showing that rock imperfections have a weak effect on heat transport. In addition, the modelled thermal diffusivity anisotropy based on the characterization of crystal orientations and thermal diffusivity tensor shows a good agreement with measurements in both alpha and beta stability field. This validation of the petrophysical simulation allows for evaluating the 3D thermal diffusivity of quartz rich rocks in different crustal conditions. The 3D thermal diffusivity of five naturally deformed quartzites displaying quartz fabrics expected in different crustal pressure and temperature ranges were simulated. The resulting thermal diffusivity anisotropies of quartzites range between 40% and 10%, depending on temperature, crystallographic fabric patterns and fabric strength. Under crustal conditions, quartzites deformed in the granulite facies display a high thermal diffusivity in the (XZ) foliation plane, whereas quartzites deformed in greenschist facies have highest thermal diffusivity in the (Z) direction normal to the foliation plane.
ISSN: 0040-1951

hal-00413568
https://hal.archives-ouvertes.fr/hal-00413568
DOI : 10.1016/j.tecto.2008.11.006

Éditeur(s) : HAL CCSD
Résumé : 38 pages
Rapport
The Chicxulub impact crater, México, is unique. It is the only known terrestrial impact structure that has been directly linked to a mass extinction event and the only terrestrial impact with a global ejecta layer. Of the three largest impact structures on Earth, Chicxulub is the best preserved. Chicxulub is also the only known terrestrial impact structure with an intact, unequivocal topographic peak ring. Chicxulub’s role in the Cretaceous/Paleogene (K-Pg) mass extinction and its exceptional state of preservation make it an important natural laboratory for the study of both large impact crater formation on Earth and other planets and the effects of large impacts on the Earth’s environment and ecology. Our understanding of the impact process is far from complete, and despite more than 30 years of intense debate, we are still striving to answer the question as to why this impact was so catastrophic.During International Ocean Discovery Program (IODP) Expedition 364, Paleogene sediments and lithologies that make up the Chicxulub peak ring were cored to investigate (1) the nature and formational mechanism of peak rings, (2) how rocks are weakened during large impacts, (3) the nature and extent of post-impact hydrothermal circulation, (4) the deep biosphere and habitability of the peak ring, and (5) the recovery of life in a sterile zone. Other key targets included sampling the transition through a rare midlatitude section that might include Eocene and Paleocene hyperthermals and/or the Paleocene/Eocene Thermal Maximum (PETM); the composition and character of the impact breccias, melt rocks, and peak-ring rocks; the sedimentology and stratigraphy of the Paleocene–Eocene Chicxulub impact basin infill; the chronology of the peak-ring rocks; and any observations from the core that may help us constrain the volume of dust and climatically active gases released into the stratosphere by this impact. Petrophysical property measurements on the core and wireline logs acquired during Expedition 364 will be used to calibrate geophysical models, including seismic reflection and potential field data, and the integration of all the data will calibrate impact crater models for crater formation and environmental effects. The proposed drilling directly contributes to IODP Science Plan goals:Climate and Ocean Change: How resilient is the ocean to chemical perturbations? The Chicxulub impact represents an external forcing event that caused a 75% level mass extinction. The impact basin may also record key hyperthermals within the Paleogene.Biosphere Frontiers: What are the origin, composition, and global significance of subseafloor communities? What are the limits of life in the subseafloor? How sensitive are ecosystems and biodiversity to environmental change? Impact craters can create habitats for subsurface life, and Chicxulub may provide information on potential habitats for life, including extremophiles, on the early Earth and other planetary bodies. Paleontological and geochemical studies at ground zero will document how large impacts affect ecosystems and effects on biodiversity.Earth Connections/Earth in Motion: What are the composition, structure and dynamics of Earth’s upper mantle? What mechanisms control the occurrence of destructive earthquakes, landslides, and tsunami? Mantle uplift in response to impacts provides insight into dynamics that differ between Earth and other rocky planets. Impacts generate earthquakes, landslides, and tsunami, and scales that generally exceed plate tectonic processes yield insight into effects, the geologic record, and potential hazards.IODP Expedition 364 was a Mission Specific Platform expedition to obtain subseabed samples and downhole logging measurements from the sedimentary cover sequence and peak ring of the Chicxulub impact crater. A single borehole was drilled into the Chicxulub impact crater on the Yucatán continental shelf, recovering core from 505.7 to 1334.73 m below seafloor with ~99% core recovery and acquiring downhole logs for the entire depth.
International Ocean Discovery Program

hal-01639520
https://hal.archives-ouvertes.fr/hal-01639520
DOI : 10.14379/iodp.pr.364.2017

Éditeur(s) : HAL CCSD
Résumé : Fault zones are major discontinuities in sedimentary basins. Understanding their role on fluid migrations is an essential issue to (i) characterize the mechanisms and kinematics of deformation and (ii) to determine the parameters which control the distribution of energetic or mineral resources. This work applies to faulting under a temperature range of 200-250°C, corresponding to that of deeply buried reservoirs as well as potentially seismogenic fault zones. The studied faults are normal faults affecting the “Grès d’Annot” Formation, a Priabonian-Rupelian siliclastic turbidite succession of the Alpine foreland basin. They are located in two distinct areas: the Moutière-Restefond area in the eastern part of the basin and the Estrop area in the western part. Vitrinite reflectance outside fault zones indicates maximal temperatures of 240-260°C at Moutière-Restefond and 170-200°C at Estrop, i.e. burial depths around 8 km and 6 km, respectively, assuming a mean geothermal gradient of 30°C/km. Burial was due to underthrusting below the Embrunais-Ubaye Alpine nappes, the difference in burial between the two areas traducing the westward taper of the nappe front.The studied faults affect alternating arkosic sandstone beds and pelite layers with offsets from centimeters to decameters. Two types of core zones are recognized: (1) the foliated core zones of the Moutière-Restefond area, where deformation dominated by pressure solution and synkinematic phyllosilicate neoformation resulted in a foliated fabric, and (2) the core zones of the Estrop area, characterized by dilatant quartz-mineralized veins and breccia. Fault and host rock petrophysical properties were measured on drill plugs, using the water porosity technique and nitrogen permeability technique under 2 Mpa of confining pressure. In the Moutière-Restefond fault zones, plug axes were oriented in three orthogonal directions corresponding to the main deformation axes (X, Y, Z) of the foliated arkose to characterize the effect of structural anisotropy. In the Estrop fault zones, where deformation does not show equivalent anisotropy, the plug axes were oriented according to the main fault plane orientation (i.e., parallel to azimuth, parallel to dip and normal). In each fault zone, the porosity of fault rocks is equivalent to that of host rocks. In the Moutière-Restefond fault zones, the plugs parallel to the X and Z axes of deformation have a permeability similar to that of the host rocks, whereas permeability parallel to the Y axis (i.e. parallel to the foliation and the main fault plane) is one order of magnitude higher. By contrast, the permeability values in the Estrop fault zones are isotropic and equivalent to the host rock values. This study highlights the importance of various types of deformation mechanisms and related fluid-rock interactions in determining different fault rock types within a similar protolith, ultimately controlling distinct petrophysical properties of fault zones.
Les zones de failles constituent des discontinuités majeures dans la croûte supérieure. Ce mémoire s’intéresse aux failles actives à des profondeurs de 5-8 km, i.e. dans des conditions pouvant jouer un rôle important (i) sur le comportement mécanique de de la croûte, en particulier sur son potentiel sismogénique et (ii) sur la compartimentation des réservoirs géologiques profondément enfouis.Les failles étudiées sont des failles normales (rejet jusqu’à 50 mètres) affectant des alternances de bancs de grès arkosiques et de pélites dans les Grès d’Annot, une formation turbiditique d’âge priabonien-rupélien du bassin d’avant-chaine alpin. Les Grès d’Annot ont été enfouis sous les nappes de l’Embrunais-Ubaye peu de temps après leur dépôt et exhumés au Miocène moyen-supérieur. L’étude a été réalisée dans deux secteurs des Alpes de Haute-Provence, (1) le secteur de l’Estrop (chaine des Trois Evéchés, dans la partie occidentale du bassin) et (2) le secteur de Point Vert-Restefond (alentours du col de la Bonette, dans la partie orientale du bassin). La réflectance de la vitrinite dans les Grès d’Annot indique des températures maximales de 160-190°C dans le secteur (1) et de 240-260 °C dans le secteur (2) , soit des profondeurs d’enfouissement de 5-6 km et 8-10 km, respectivement, dans l’hypothèse d’un gradient géothermique moyen de 25-30°C/km. A partir des observations microstructurales, de données d’inclusions de fluides, de modélisations thermodynamiques sur chlorites syncinématiques et des indices de cristallinité de l’illite, on a établi que les failles du secteur (1) ont fonctionné à une température d’environ 200°C pour une pression de 0.6Kbar et celles du secteur (2) dans une gamme de température de 200-220°C et de pression comprise entre 0.6 et 1.1 Kba. L’activité de la faille de Point-Vert a été datée par la méthode 40Ar/39Ar au Miocène inférieur (21 Ma). Ces failles sont interprétées comme associées aux premiers stades du soulèvement résultant de l’activité des chevauchements dans le socle sous-jacent.Deux types principaux de roches de failles caractérisent les failles étudiées. Les brèches dilatantes sont majoritaires dans les zones de failles du secteur (1) alors que les arkoses foliées sont majoritaires dans les zones de failles du secteur (2). Les brèches dilatantes témoignent de mécanismes de déformation dominés par la fracturation transgranulaire et la pression-solution des silicates. Ce dernier mécanisme se manifeste principalement par d’abondantes précipitations cycliques de quartz, les stylolites restant peu développés. Les géométries structurales sont associées à l’activation de plans T de Riedel déterminant l’ouverture de relais extensifs et un régime localement dilatant. Nous associons ce type de roche de faille à une faible pression effective au cours de la déformation.La déformation cisaillante exprimée dans les arkoses foliées témoigne de mécanismes de déformation dominés par (i) la fracturation intragranulaire et transgranulaire, (ii) la pressionsolution/ précipitation des silicates, principalement le quartz, (iii) la néoformation de micas blancs liée à l’altération des feldspaths et (iv) la précipitation de chlorite. Ce travail montre également que les transformations minéralogiques liées aux interactions fluide-roche dans la zone de faille (forte augmentation de la proportion des phyllosilicates au dépend des feldspaths) changent radicalementla composition minéralogique de la roche. Nous associons ce type de roche de faille à une forte pression effective au cours de la déformation.La pétrophysique montre que les brèches de failles (secteur 1) ont une perméabilité isotrope et équivalente à celle du protolithe (10-3mD sous 2 MPa de confinement) tandis que les roches foliées (secteur 2) montrent une augmentation de perméabilité (10-2mD) selon l’axe Y de la déformation, d’un ordre de grandeur supérieure aux perméabilités suivant les axes X et Z et dans la roche hôte (10-3mD). Ce drain préférentiel potentiel est associé à l’orientation des phyllosilicates dans la foliation.
https://hal.archives-ouvertes.fr/tel-01310382

tel-01310382
https://hal.archives-ouvertes.fr/tel-01310382
https://hal.archives-ouvertes.fr/tel-01310382/document
https://hal.archives-ouvertes.fr/tel-01310382/file/Th%C3%A8seCAVAILHES2012.pdf

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
3D seismic data located in the Gjallar Ridge (Vøring Basin, offshore Norway) reveals a closely-spaced polygonal fault system affecting more than 800 m of homogeneous mud-dominated Quaternary and Tertiary sequences. As some faults reach the modern seafloor, they represent an active polygonal fault system at present day. Even if the processes remain unclear and are still under debate, it is generally agreed that the initiation of polygonal faults is the result of shallow burial dewatering of fine-grained unconsolidated sediments by volumetric compaction. 3D seismic data are commonly interpreted by propagating horizons automatically and by picking faults manually. However, in the case of polygonal fault intervals, this approach is time consuming due to the huge number of faults and because automatic propagation can be misleading. In this study, we applied a new technique of 3D seismic interpretation based on a sequential stratigraphy analysis, using the new PaleoScan© software (Eliis Company). It allowed us to build a 3D geological model computing more than 300 horizons within the faulted intervals. We then used the coherency attribute, depicting anomalies in the shape of seismic waveform like faults, in order to constrain a possible link between fault distribution and stratigraphic levels. Our approach allows fault throws to be calculated in milliseconds on any polygonal fault plane. The result shows that fault segments have been reactivated by dip-linkage. Distribution of faults depends on mechanical units, intervals characterized by different petrophysical properties, which are independent from lithological and diagenetic changes. According to these results, we propose a model showing the evolution of polygonal fault intervals in which faulting stages are separated by a quiescence phase during burial. A first tier of polygonal faults is initiated at a specific depth, according to the Cam-clay model. Then, following a period of quiescence during which mud-rich sediments continued to accumulate, new fault segments are initiated above the first mechanical unit and within this undeformed interval. New nucleated faults then connect downward to pre-existing underlying polygonal fault system, thus progressively increasing the thickness of the faulted interval.
ISSN: 0025-3227

hal-00772470
https://hal.archives-ouvertes.fr/hal-00772470
DOI : 10.1016/j.margeo.2012.07.016

Éditeur(s) : HAL CCSD
Résumé : This work provides new constraints on the development and on the distribution of the deformation in the upper mantle and particularly beneath transform plate boundaries. USArray experiment and the remarkable increase of the dataset in California for the past ten years allowed us to scrutinize the lateral variations of the anisotropy in the vicinity of the San Andreas Fault zone. We have confirmed and increased the detection of two layers of anisotropy beneath this plate boundary. The first layer, located in the lithosphere, is related to the deformation induced at the fault, and the other one, located in the asthenosphere, is coherent with the anisotropy observed far from it, its origin is however less clear. We show that the deformation zone associated both to the San Andreas, Calaveras and Hayward Faults, is likely 40 km wide at 70 km depth. We then performed numerical thermomechanical modeling (ADELI) of the displacement of a transform plate boundary associated with the computation of the development of crystallographic fabrics using a viscoplastic selfconsistent approach (VPSC). We analyzed the distribution of the deformation in the model ant looked after the possible interactions at depth between deformation caused at surface by the strike-slip dynamic of the fault and the shearing at the base of the lithosphere caused by the horizontal displacement of the plates. Elastic properties derived from the crystallographic fabrics modeled, show that such interactions exist and induce, beneath the fault zone, a progressive rotation of the crystallographic fabrics with depth. Seismological signature of these smooth rotations is however not relevant with the presence of two anisotropic layers as proposed beneath California. We thus consider that a decoupling zone exists between the lithosphere and the asthenosphere beneath the California to account for the sharp separation between a lithospheric and an asthenospheric deformation. We furthermore estimate that anisotropy observed far form the San Andreas Fault in California cannot be explained only by the drag of the asthenosphere by the North America lithosphere as proposed in our article. Indeed, we can only expect few tenths of second of splitting delay from the anisotropic properties derived from the numerical modeling of a plate moving in the same direction and in the same velocity than the North American lithosphere only for 10 Ma of displacement. As delays observed in California rather reach 1.5 s, anisotropy in this region thus requires the existence of an active asthenospheric flow to be explained.
Le travail réalisé pendant cette thèse a permis d'apporter de nouvelles contraintes sur le développement et la distribution de la déformation dans le manteau supérieur et plus particulièrement au niveau des grandes limites de plaques décrochantes. Grâce à l'apport de l'expérience USArray et d'une dizaine d'années d'enregistrements sismologiques supplémentaires, nous avons pu étudier, de manière précise, les variations d'anisotropie dans le voisinage de la Faille de San Andreas. Nous avons confirmé et étendu l'observation de deux couches anisotropes sous cette limite de plaque. On y observe une première couche localisée dans la lithosphère marquant la déformation induite à la limite de plaque, et une autre, asthénosphérique, cohérente avec l'anisotropie observée loin de la faille et d'origine plus discutée. Nous avons montré que la zone de déformation associée aux failles de San Andreas, Calaveras et d'Hayward a, vraisemblablement, une largeur d'au moins 40 kilomètres en base de lithosphère, sous chacune de ces failles. Nous avons ensuite procédé à la modélisation thermomécanique (ADELI) de la migration d'une limite de plaques décrochante couplée à une modélisation du développement de fabriques cristallographiques par une approche viscoplastique auto-cohérente (VPSC). Ceci nous a permis d'y observer le développement de la déformation et les conséquences des possibles interactions entre la déformation décrochante en surface et le cisaillement en base de lithosphère dû au déplacement horizontal des plaques. Les propriétés élastiques déduites des fabriques cristallographiques modélisées montrent que de telles interactions existent et provoquent, sous la limite de plaques, une rotation des orientations cristallographiques avec la profondeur. Le signal associé à ces rotations progressives n'est toutefois pas cohérent avec la présence de deux couches d'anisotropie comme proposée sous la faille de San Andreas. Nous pensons par conséquent qu'il existe, sous la Californie, une zone de découplage entre la lithosphère et l'asthénosphère, permettant d'individualiser une déformation lithosphérique d'une déformation asthénosphérique. Nous estimons, en outre, que l'anisotropie observée dans l'asthénosphère sous la Californie ne peut être expliquée seulement par le cisaillement induit par le déplacement de la lithosphère Nord Amérique. En effet, les propriétés anisotropes obtenues par modélisation à partir d'une plaque se déplaçant dans une direction et une vitesse proche de celle de la plaque Amérique du Nord montrent qu'on ne peut espérer guère plus que quelques dixièmes de seconde de délai au bout de 10 Ma de déplacement. Les déphasages mesurés en Californie étant de l'ordre de 1,5 s, il est donc nécessaire d'invoquer la présence d'écoulements mantelliques actifs sous cette région.
https://tel.archives-ouvertes.fr/tel-00767124

tel-00767124
https://tel.archives-ouvertes.fr/tel-00767124
https://tel.archives-ouvertes.fr/tel-00767124/document
https://tel.archives-ouvertes.fr/tel-00767124/file/theseBonnin.pdf

Éditeur(s) : HAL CCSD Springer
Résumé : Borehole logs provide in situ information about the fluctuations of petrophysical properties with depth and thus allow the characterization of the crustal heterogeneities. A detailed investigation of these measurements may lead to extract features of the geological media. In this study, we suggest a regularity analysis based on the continuous wavelet transform to examine sonic logs data. The description of the local behavior of the logs at each depth is carried out using the local Hurst exponent estimated by two (02) approaches: the local wavelet approach and the average-local wavelet approach. Firstly, a synthetic log, generated using the random midpoints displacement algorithm, is processed by the regularity analysis. The obtained Hurst curves allowed the discernment of the different layers composing the simulated geological model. Next, this analysis is extended to real sonic logs data recorded at the Kontinentales Tiefbohrprogramm (KTB) pilot borehole (Continental Deep Drilling Program, Germany). The results show a significant correlation between the estimated Hurst exponents and the lithological discontinuities crossed by the well. Hence, the Hurst exponent can be used as a tool to characterize underground heterogeneities.
ISSN: 1866-7411

hal-00617470
https://hal.archives-ouvertes.fr/hal-00617470
DOI : 10.1007/s12517-010-0129-y

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
A dense network of seismic stations has been deployed on the Kaapvaal craton (South Africa) to investigate the upper mantle seismic structures. In order to bring independent petrophysical constraints, we analyze a direct sampling of the cratonic upper mantle and determine the seismic properties of 48 mantle nodules brought up to the Earth's surface by kimberlite eruptions. Seismic properties of these nodules are calculated from the olivine and pyroxene crystal preferred orientations and the single crystal elastic constants. Despite variations in the nodules compositions, microstructures and crystallographic preferred orientations, seismic anisotropy is rather homogeneous throughout the craton. Mean S-wave anisotropy is weak (2.64 %), which is compatible with the small measured SKS wave splitting (mean delay time of 0.62 s).
ISSN: 0094-8276

hal-01389119
http://hal.univ-reunion.fr/hal-01389119
http://hal.univ-reunion.fr/hal-01389119/document
http://hal.univ-reunion.fr/hal-01389119/file/BenIsmail_GRL_kaapvaal_GRL2001.pdf
DOI : 10.1029/2000GL012419

Éditeur(s) : HAL CCSD
Résumé : In coastal carbonate aquifers submitted to a saline intrusion, water - rock interactions processes at the interface between freshwater and saltwater are a cause for heterogeneities development within the porous media. The dissolutions and precipitations induced by the mixing zone play a major role in the transport properties of the reservoir and so in the long term evolution of the saltwater intrusion. The characterization and the in situ observation of a current saline intrusion in the Llucmajor carbonate platform at the experimental site of Ses Sitjoles (South-Easth of Mallorca Island, Spain), allowed to study the temporal evolution of the saltwater intrusion and the biogeochemical processes active in the mixing zone. The influence of microstructure, characterized using X-Ray microtomography, on the petrophysical and flow properties was investigated in laboratory and flow-through experiments were also conducted to study the modifications of the microstructures when submitted to water - rock interactions processes. The mixing zone at the Ses Sitjoles site appears as quite thick and not very sensitive to climate and anthropic stress and is proved to be the locus of active microbiological activity. Laboratory studies highlight a strong control of the microporosity on transport processes and of pCO2 on water - rock interactions. The percolation experiments of slightly reactive waters reveal calcite dissolution together with a decrease in permeability due to a rearrangement of micro-grains within the microporous network.
Les processus d'interactions fluide-roche à l'interface eau douce-eau salée, dans les aquifères carbonatés côtiers soumis à une intrusion saline, sont une des causes du développement d'hétérogénéités dans la structure du milieu poreux. Les dissolutions et/ou précipitations engendrées par la présence de cette zone de mélange jouent un rôle déterminant pour les propriétés de transport du réservoir et donc l'évolution à long terme de l'intrusion d'eau salée. En prenant l'exemple de la plateforme carbonatée de Llucmajor au niveau du site expérimental de Ses Sitjoles (Sud-Est de Majorque, Espagne), un travail de caractérisation et d'observation in situ à moyen terme de l'intrusion saline actuelle de ce réservoir permet de décrire son évolution temporelle et les processus biogéochimiques actifs dans la zone de mélange. L'influence de la microstructure du milieu poreux, caractérisée par microtomographie RX, sur les propriétés pétrophysiques et hydrodynamiques est étudiée en laboratoire et des expériences de percolations d'eaux réactives (mélanges eau douce - eau salée et eau pure chargée en CO2) sont réalisées afin d'étudier les modifications de ces microstructures lorsqu'elles sont soumises à des interactions eau - roche. La zone de mélange eau douce - eau salée rencontrée au niveau du site de Ses Sitjoles est large et peu sensible aux contraintes extérieures (climatologiques et anthropiques) et constitue un lieu d'activité microbiologique particulièrement actif. En laboratoire, on observe un fort contrôle des phénomènes de transport par la microporosité et des processus d'interactions eau - roche par la pCO2. Dans le cas d'une percolation de fluides moyennement réactifs, les expériences mettent en évidence une dissolution de calcite accompagnée par une diminution de la perméabilité, liée à un réarrangement des micro-grains à l'intérieur du réseau microporeux.
https://tel.archives-ouvertes.fr/tel-00767152

tel-00767152
https://tel.archives-ouvertes.fr/tel-00767152
https://tel.archives-ouvertes.fr/tel-00767152/document
https://tel.archives-ouvertes.fr/tel-00767152/file/thesegaring.pdf

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The analysis of three cataclastic band sets from Provence (France) reveals that the band density, their conjugate angles, their ratio of shear displacement to compaction, and the amount of cataclasis within the bands differ and can be expressed as functions of tectonic setting and petrophysical properties. We identify (1) a dense and closely spaced network of shear-enhanced (reverse) compaction bands; (2) a regularly spaced less dense network of reverse compactional shear bands; and (3) a localized network of normal shear bands. The field data show that strain localization is favored in an extensional regime and is characterized by shear bands with a large shear to compaction ratio and a small conjugate band angle. In contrast, distributed strain is favored in a contractional regime and is characterized by compactional bands with a low ratio of shear to compaction and a large conjugate band angle. To explain the mechanical origin of this strain localization, we quantify the yield strength and the stress evolution in extensional and contractional regimes in a frictional porous granular material. We propose a model of strain localization in porous sands as a function of tectonic stresses, burial depth, material properties, strain hardening and fluid pressure. Our model suggests that stress reduction, inherent to extensional regime, favors strain localization as shear bands, whereas stress increase during contraction favors development of compactional bands.
ISSN: 0191-8141

hal-00856921
https://hal.archives-ouvertes.fr/hal-00856921
DOI : 10.1016/j.jsg.2012.11.011

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
In order to reveal the structural properties at small scale within a geological unit apparently homogeneous at large scale, we explore the stochastic components of petrophysical measurements recorded in a borehole drilled through the Cretaceous siliclastic units of the South-eastern Basin of France. First, we analyse the instantaneous fluctuations of gamma ray log measurements searching for scaling laws in its power spectrum. Power spectra indicate a scaling behaviour with average exponent beta a values mostly falling in the range 1
ISSN: 0920-4105

hal-00496425
https://hal.archives-ouvertes.fr/hal-00496425
DOI : 10.1016/j.petrol.2009.11.001

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Improving the prediction of sub-seismic structures and their petrophysical properties is essential for realistic characterization of deformed sandstone reservoirs. In the present paper, we describe permeability contrasts induced by cataclastic deformation bands and faults in porous sandstones (766 data synthesized from field examples and the literature). We also discuss the influence of several factors, including tectonic regime, presence of a fault, burial depth, host sandstone porosity, and grain size and sorting for their initiation and permeability. This analysis confirms that permeability decrease is as a function of grain-crushing intensity in bands. Permeability reduction ranges from very limited in crush-microbreccia of compaction bands to high permeability reduction in cataclasites and ultracataclasites of shear-dominated bands, band clusters and faults. Tectonic regime, and especially normal-fault regime, with its tendency to localize strain and generate faults, is identified as the most important factor, leading to the formation of cataclastic bands with high permeability contrasts. Moreover, moderate burial depth (1–3 km) favors cataclastic bands with high permeability contrasts with respect to the host sandstone. High porosity, coarse-grain size and good grain sorting can slightly amplify the permeability reductions recorded in bands.
ISSN: 0191-8141

hal-01218408
https://hal.archives-ouvertes.fr/hal-01218408
DOI : 10.1016/j.jsg.2015.03.013