Éditeur(s) : HAL CCSD Ecole nationale du génie rural
Résumé : International audience
ISSN: 0035-2829

hal-01598663
https://hal-agroparistech.archives-ouvertes.fr/hal-01598663
DOI : 10.4267/2042/51113

Éditeur(s) : HAL CCSD Elsevier
Résumé :  
Previous studies in lowland tropical rainforests of French Guiana showed that, among non-N2-fixing trees, two groups of late successional species contrasting in their leaf 15N natural abundance coexist, suggesting two different main ways of nitrogen acquisition. Two abundant late-successional species typically co-occurring in rainforests in French Guiana, namely Eperua falcata and Dicorynia guianensis, were chosen as representative of each group. Stable isotope techniques and measurements of potentials of microbial N transformation were performed to assess to what extent leaf 15N natural abundance of these species could be related to (i) d15N signatures of soil mineral N sources and (ii) the capacity of soil to express nitrification and denitrification (both processes being directly involved in the balance between NH4 + and NO3 - ). Soil d15N-NH4 + was roughly similar to leaf d15N of D. guianensis (around 3.5%), suggesting a preferential use of NH4 +, whereas in E. falcata, leaf d15N values were closer to root d15N-NO3 _ values (0.2 and _2.0%, respectively), suggesting a preferential use of NO3 _. These differences in N source utilization were not accompanied by differences in availability in soil NO3 _ or in intensity of microbial functions responsible for soil N mineral evolution. However, (i) under both tree species, these functions showed clear spatial partitioning, with denitrification occurring potentially in soil and nitrification in the litter layer, and (ii) E. falcata fine roots colonized the litter layer much more strongly than D. guianensis fine roots. This strongly suggests that (i) the contrasted leaf d15N values found in the two late-successional species reveal distinct N acquisition strategies and (ii) the ability of roots to predominantly exploit the litter layer (E. falcata) or the soil (D. guianensis) may constitute an important explanation of the observed differences. A complementarity between tree species, based on mineral N resource partitioning (itself resulting from a spatially structured location of the microbial functions responsible for the balance between NH4 + and NO3 - ), can thus be supposed.
ISSN: 0038-0717

hal-01032035
https://hal.archives-ouvertes.fr/hal-01032035
DOI : 10.1016/j.soilbio.2007.09.011

Éditeur(s) : HAL CCSD Ecological Society of America
Résumé : We investigated the relationship between habitat association and physiological performance in four congeneric species pairs exhibiting contrasting distributions between seasonally flooded and terra firme habitats in lowland tropical rain forests of French Guiana, including Virola and Iryanthera (Myristicaceae), Symphonia (Clusiaceae), and Eperua (Caesalpiniaceae). We analyzed 10-year data sets of mapped and measured saplings (stems 150 cm in height and <10 cm diameter at breast height [dbh]) and trees (stems 10 cm dbh) across 37.5 ha of permanent plots covering a 300-ha zone, within which seasonally flooded areas (where the water table never descends below 1 m) have been mapped. Additionally, we tested the response of growth, survival, and leaf functional traits of these species to drought and flood stress in a controlled experiment. We tested for habitat preference using a modification of the torus translation method. Strong contrasting associations of the species pairs of Iryanthera, Virola, and Symphonia were observed at the sapling stage, and these associations strengthened for the tree stage. Neither species of Eperua was significantly associated with flooded habitats at the sapling stage, but E. falcata was significantly and positively associated with flooded forests at the tree stage, and trees of E. grandiflora were found almost exclusively in nonflooded habitats. Differential performance provided limited explanatory support for the observed habitat associations, with only congeners of Iryanthera exhibiting divergent sapling survival and tree growth. Seedlings of species associated with flooded forest tended to have higher photosynthetic capacity than their congeners at field capacity. In addition, they tended to have the largest reductions in leaf gas exchange and growth rate in response to experimental drought stress and the least reductions in response to experimental inundation. The corroboration of habitat association with differences in functional traits and, to a lesser extent, measures of performance provides an explanation for the regional coexistence of these species pairs. We suggest that specialization to seasonally flooded habitats may explain patterns of adaptive radiation in many tropical tree genera and thereby provide a substantial contribution to regional tree diversity.
ISSN: 0012-9658

hal-01031746
https://hal.archives-ouvertes.fr/hal-01031746

Éditeur(s) : HAL CCSD De Gruyter
Résumé : International audience
The data available in the literature concerning wood cutting forces permit to build models or to simulate the main wood machining processes (milling, sawing, peeling etc.). This approach contributes to a better understanding of formation of wood surfaces and chips and the data may be helpful to optimize cutting geometry, reduce tool wear, improve tool material, and to size tool-machines. The models may also be useful for industrial application in two ways: (1) providing data to optimise the settings for a given operation (batch approach) and (2) building predictive models that could be the basis of an online control systems for the machining processes (interactive approach). A prerequisite for this is that numerous machining tests on different wood materials are performed based on experiences with different kind of tools and experimental devices. With potential industrial applications in focus, the emphasis of this review was on the wood peeling process, which is a very demanding special case of wood cutting. Though not so many industrial machines are equipped with expensive force sensors, there is a lot of high quality information available about cutting forces which may be useful to improve the scientific or technologic knowledge in wood machining. Alternative parameters, such as vibration or sound measurements, appear to be promising substitutes in the praxis, particularly to feed online control systems of any wood cutting process.
ISSN: 0018-3830

hal-00876003
https://hal.archives-ouvertes.fr/hal-00876003
https://hal.archives-ouvertes.fr/hal-00876003/document
https://hal.archives-ouvertes.fr/hal-00876003/file/LABOMAP_Holzforschung_2009_denaud.pdf
ENSAM : http://hdl.handle.net/10985/7419

Éditeur(s) : HAL CCSD Oxford University Press (OUP): Policy B - Oxford Open Option A
Résumé :  
absent
Journal of Experimental Botany

hal-01032195
https://hal.archives-ouvertes.fr/hal-01032195
DOI : 10.1093/jxb/erp276

Éditeur(s) : HAL CCSD Wiley
Résumé : International audience
ISSN: 0028-646X

hal-01080855
https://hal-agroparistech.archives-ouvertes.fr/hal-01080855
DOI : 10.1111/j.1469-8137.2007.02227.x

Éditeur(s) : HAL CCSD De Gruyter
Résumé : COST Action E35 : Fracture mechanics and micromechanics of wood and wood composites with regard to wood machining
The data available in the literature concerning wood cutting forces permits to build models or to simulate the main wood machining processes ( milling, sawing, peeling, etc.). This approach contributes to a better understanding of formation of wood surfaces and chips and the data may be helpful to optimise cutting geometry, reduce tool wear, improve tool material, and to size tool-machines. The models may also be useful for industrial application in two ways: ( 1) providing data to optimise the settings for a given operation ( batch approach), and ( 2) building predictive models that could be the basis of an online control system for the machining processes ( interactive approach). A prerequisite for this is that numerous machining tests on different wood materials are performed based on experiences with different kind of tools and experimental devices. With a focus on potential industrial applications, the emphasis of this review was on the wood peeling process, which is a very demanding special case of wood cutting. Although not so many industrial machines are equipped with expensive force sensors, there is a lot of high quality information available about cutting forces which may be useful to improve the scientific or technological knowledge in wood machining. Alternative parameters, such as vibration or sound measurements, appear to be promising substitutes in the praxis, particularly to feed online control systems of any wood cutting process.
ISSN: 0018-3830

hal-01032121
https://hal.archives-ouvertes.fr/hal-01032121
DOI : 10.1515/HF.2009.014

Éditeur(s) : HAL CCSD Springer Verlag
Résumé :  
Growth strains were measured in situ in nine trees of three species from a French Guiana tropical rainforest in a clearly active verticality restoration process. The aim was to detect tension wood within the samples. Wood specimens were cut in the vicinity of the growth strain measurements in order to determine the microfibril angle and some mechanical and physical properties. As suspected, tensile growth strain was much higher in tension wood zones, as shown by the slightly higher longitudinal modulus of elasticity. Conversely, tension wood showed reduced compression strength. Longitudinal shrinkage was much higher in tension wood than in opposite wood. Clear relationships between the microfibril angle and longitudinal properties were noted in comparison (i) with those observed in gymnosperm compression wood and (ii) with expected relationships from the organization of wood fibres cell wall structure.
ISSN: 0043-7719

hal-01032114
https://hal.archives-ouvertes.fr/hal-01032114
DOI : 10.1007/s00226-010-0323-9

Éditeur(s) : HAL CCSD
Résumé : The functioning of ecosystems is based on the functional diversity, which is the complementto the species diversity. In the tropical rain forest, the saplings grow in the dense and stratifiedunderstorey. This thesis deals with the diversity of realisation of the support function by thesaplings in this context. The hypotheses are that the race through higher and so brighter levelsconstrains the mechanical security of the saplings with necessary biomass saving and need ofreorientation (gravitropism) and acclimation (mecanoperception and response) processes andthat diversity is thus structured by the species light-demand and affinity for the risk. Using awide sample of 16 species, at the Paracou station, relevant functional traits - risk of not-selfsupportingand gravitropic performance - are defined through adapted modellings whichcombine trunk shape, biomass distribution and wood properties. The traits values varybetween species and also with ontogeny and saplings environment. These variations are dueto elementary traits (shape, biomass, wood) with strong geometrical effects. The less selfsupportingspecies (low mechanical security) have the highest gravitropic performances andare also the most light-demanders. A species, Tachigali melinonii, distinguishes itself bystrong slendernesses and a frequent not-self-supporting habit letting suppose a strongadaptability to its mechanical environment. An experiment (growth response to staking),however, did not provide the expected results whereas the species with lower risks, Dicoryniaguianensis, reacted more.
Le fonctionnement des écosystèmes repose sur la diversité fonctionnelle, complément de ladiversité spécifique. En forêt tropicale humide, les jeunes arbres croissent en sous-bois denseet stratifié. Cette thèse porte sur la diversité de réalisation de la fonction biomécanique desoutien. Les hypothèses sont que la "course" vers les strates plus éclairées contraint lasécurité mécanique des jeunes arbres, avec de nécessaires économies de matière et recours àdes processus de réparation (gravitropisme) et d'acclimatation (mécanoperception et réponse),et que la diversité est donc structurée par le besoin en lumière et l'affinité pour le risque desespèces. Avec un échantillon de 16 espèces sur le dispositif de Paracou, des traits fonctionnelspertinents - risque de non-autoportance et performance gravitropique - sont définis au traversde modélisations adaptées qui combinent forme des troncs, répartition des masses etpropriétés du bois. Ces traits varient entre espèces mais aussi avec le développement etl'environnement des arbres. Ces variations sont dues aux variations des traits élémentaires(forme, masses, bois) avec de forts effets géométriques. Les espèces les moins autoportantes(faible sécurité) ont les plus fortes performances gravitropiques. Ce sont aussi les plusdemandeuses de lumière. Une espèce Tachigali melinonii se distingue par de fortsélancements et une fréquente non-autoportance laissant supposer une adaptabilité forte àl'environnement mécanique. Une expérimentation (réponse de croissance au tuteurage) n'acependant pas abouti aux résultats supposés puisque c'est au contraire l'espèce à faible risque,Dicorynia guianensis, qui s'est montrée plus réactive.
https://tel.archives-ouvertes.fr/tel-00272100

tel-00272100
https://tel.archives-ouvertes.fr/tel-00272100
https://tel.archives-ouvertes.fr/tel-00272100/document
https://tel.archives-ouvertes.fr/tel-00272100/file/TheseJaouen.pdf

Éditeur(s) : HAL CCSD Oxford University Press (OUP)
Résumé : International audience
ISSN: 0022-0957

hal-01080844
https://hal-agroparistech.archives-ouvertes.fr/hal-01080844
DOI : 10.1093/jxb/erm268

Éditeur(s) : HAL CCSD Nature Publishing Group
Résumé : Tropical forests store large amounts of biomass despite they generally grow in nutrient-poor soils, suggesting that the role of soil characteristics in the structure and dynamics of tropical forests is complex. We used data for >34 000 trees from several permanent plots in French Guiana to investigate if soil characteristics could predict the structure (tree diameter, density and aboveground biomass), and dynamics (growth, mortality, aboveground wood productivity) of nutrient-poor tropical forests. Most variables did not covary with site-level changes in soil nutrient content, indicating that nutrient-cycling mechanisms other than the direct absorption from soil (e.g. the nutrient uptake from litter, the resorption, or the storage of nutrients in the biomass), may strongly control forest structure and dynamics. Ecosystem-level adaptations to low soil nutrient availability and long-term low levels of disturbance may help to account for the lower productivity and higher accumulation of biomass in nutrient-poor forests compared to nutrient-richer forests.
ISSN: 2045-2322

hal-01606170
https://hal.archives-ouvertes.fr/hal-01606170
DOI : 10.1038/srep45017
PRODINRA : 389876