Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Serpentinites form by hydration of mantle peridotite and constitute the largest potential reservoir of fluid-mobile elements entering subduction zones. Isotope ratios of one such element, boron, distinguish fluid contributions from crustal versus serpentinite sources. Despite 85% of boron hosted within abyssal peridotite being lost at the onset of subduction at the lizardite-to-antigorite transition, a sufficient cargo of boron to account for the composition of island arc magma is retained (c. 7 μg g− 1, with a δ11B of + 22‰) until the down-going slab reaches the antigorite-out isograd. At this point a 11B-rich fluid, capable of providing the distinctive δ11B signature of island arc basalts, is released. Beyond the uniquely preserved antigorite-out isograd in serpentinites from Cerro del Almirez, Betic Cordillera, Spain, the prograde lithologies (antigorite–chlorite–orthopyroxene–olivine serpentinite, granofels-texture chlorite-harzburgite and spinifex-texture chlorite-harzburgite) have very different boron isotope signatures (δ11B = − 3 to + 6‰), but with no significant difference in boron concentration compared to the antigorite-serpentinite on the low P–T side of the isograd. 11B-rich fluid, which at least partly equilibrated with pelagic sediments, is implicated in the composition of these prograde lithologies, which dehydrated under open-system conditions. Serpentinite-hosted boron lost during the early stages of dehydration is readily incorporated into forearc peridotite. This, in turn, may be dragged to sub-arc depths as a result of subduction erosion and incorporated in a mélange comprising forearc serpentinite, altered oceanic crust and pelagic sediment. At the antigorite-out isograd it dehydrates, thus potentially providing an additional source of 11B-rich fluids.
ISSN: 0009-2541

hal-01172276
https://hal.archives-ouvertes.fr/hal-01172276
DOI : 10.1016/j.chemgeo.2014.03.015

Éditeur(s) : HAL CCSD Springer Verlag (Germany) Springer Verlag
Résumé : International audience
We have investigated the partitioning of Fe3+ between orthopyroxene (Opx) and garnet (Grt) in well-equilibrated mantle xenoliths using Mössbauer spectroscopy. The samples cover a wide range of P–T conditions (2.1–6.6 GPa, 690–1,412 °C) and geothermal gradients, and are thus representative for Earth’s upper mantle in both on-craton and off-craton continental settings. Garnet has Fe3+/Fetot ratios of 0.03–0.13 and Fe2O3 contents of 0.24–1.00 wt%. Orthopyroxene has, on average, lower Fe3+/Fetot ratios (0.01–0.09) and Fe2O3 contents (0.05–0.63 wt%). In low-pressure, high-temperature samples, however, Opx is systematically richer in Fe2O3 than the coexisting Grt. The Fe3+ Opx/Grt partition coefficient (DOpx/GrtFe3+) shows no obvious relationship with temperature, but increases with decreasing pressure and with increasing NaOpx. The observed Opx/Grt Fe3+ systematics imply that the Opx–Grt Fe–Mg exchange thermometer is not robust against redox changes if total Fe is treated as Fe2+. An approximate evaluation of errors on T estimates due to redox effects predicts negligible deviations for strongly reduced conditions (<65 °C), but potentially large deviations (> to ≫100 °C) for strongly oxidized conditions, especially at very high pressure and when both P and T are calculated by iteration.
ISSN: 0010-7999

hal-01121606
https://hal.archives-ouvertes.fr/hal-01121606
DOI : 10.1007/s00410-014-1101-8

Éditeur(s) : HAL CCSD Mineralogical Society of America
Résumé : International audience
Hydrogen distribution between nominally anhydrous minerals (NAMs) of a garnet-lherzolite under subsolidus conditions has been investigated. Separated NAMs from a garnet-peridotite from Patagonia (Chile) are annealed together (olivine, orthopyroxene, clinopyroxene, and garnet) using a piston-cylinder at 3 GPa and 1100 °C using talc-pyrex cell assembly for 10, 25, and 100 h. The talc-pyrex assembly provides enough hydrogen in the system to re-equilibrate the hydrogen concentrations at high pressure. The three coexisting nominally anhydrous minerals (NAMs, i.e., olivine, orthopyroxene, and clinopyroxene) were successfully analyzed using FTIR. The resulting hydrogen concentrations exceed significantly the initial hydrogen concentration by a factor of 13 for olivine and a factor of 3 for both pyroxenes. Once mineral-specific infrared calibrations are applied, the average concentrations in NAMs are 115 ± 12 ppm wt H2O for olivine, 635 ± 75 ppm wt H2O for orthopyroxene, and 1214 ± 137 ppm wt H2O for clinopyroxene, garnet grains are dry. Since local equilibrium seems achieved over time (for 100 h), the calculated concentration ratios are interpreted as mineral-to-mineral hydrogen partition coefficients (i.e., Nernst’s law) for a garnet-peridotite assemblage. It yields, based on mineral-specific infrared calibrations, DOpx/Ol = 5 ± 1, DCpx/Ol = 10 ± 2, and DCpx/Opx = 1.9 ± 0.4. While DCpx/Opx is in agreement (within error) with previous results from experimental studies and concentration ratios observed in mantle-derived peridotites, the DPx/Ol from this study are significantly lower than the values reported from mantle-derived xenoliths and also at odd with several previous experimental studies where melt and/or hydrous minerals co-exists with NAMs. The results confirm the sensitivity of hydrogen incorporation in olivine regarding the amount of water-derived species (H) in the system and/or the amount of water in the coexisting silicate melt. The results are in agreement with an important but incomplete dehydration of mantle-derived olivine occurring at depth, during transport by the host magma or during slow lava flow cooling at the surface. The rapid concentration modification in mantle pyroxenes also points out that pyroxenes might not be a hydrogen recorder as reliable as previously thought.
ISSN: 0003-004X

hal-01622132
https://hal.archives-ouvertes.fr/hal-01622132
DOI : 10.2138/am-2017-6089

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Before attaining the mantle wedge, where they trigger partial melting, volatiles released from dehydration reactions in the slab have to migrate across a relatively cold (<750 degrees C), peridotite-layer above the incoming slab. In order to unravel the mechanisms allowing for this initial stage of fluid transport, we performed a detailed field and microstructural study of metamorphic prograde peridotites in the Cerro del Almirez ultramafic massif (Betic Cordillera, Spain), where evidences of one of the most important dehydration reactions in subduction zones, the high-pressure antigorite breakdown (P = 1.6-1.9 GPa and T approximate to 680 degrees C), can be mapped in the field. This reaction led to arborescent growth of centimeter-size olivine and orthopyroxene, producing a chlorite-harzburgite with a spinifex-like texture. Microstructural observations and crystal preferred (CPO) mapping show no evidences of solid-state deformation during the prograde growth of olivine and orthopyroxene at the expenses of antigorite. However, a few tens to a hundred meters away from the reaction front, the metamorphic texture is partially obliterated by grain-size reduction in roughly planar conjugate zones, a few mm to meters wide. Grain size reduction zones (GSRZ) are characterized by (1) sharp contacts with undeformed spinifex-like texture domains, (2) important reduction of the olivine grain size (60-250 mu m), (3) olivine color change from brownish to colorless, (4) decrease in the modal amount of orthopyroxene, and (5) at the mm- to cm-scale, irregular shapes and abrupt terminations. Field and microstructural observations exclude that relative displacement took place across these GSRZ. Changes in modal composition imply reactions with fluids undersaturated in silica. Analysis of olivine crystal-preferred orientations (CPO) in GSRZ shows patterns similar, but more dispersed, than those in neighboring spinifex-like domains. It also reveals mm- to cm-scale discrete domains with rather homogeneous crystallographic orientations suggesting inheritance from the preexisting spinifex-like olivines in the host peridotite. Misorientation angles between neighboring grains in the GSRZ show peaks at similar to 5-10 degrees and similar to 20 degrees, but rotations are not crystallographically controlled. Based on these observations, we rule out the formation of the GSRZ by dynamic recrystallization during dislocation creep and propose that they record brittle deformation (microcraking) of the spinifex-like chlorite-harzburgite, probably induced by hydrofracturing at high pressure and relative low temperature conditions (680-710 degrees C). High-pressure hydrofracturing can, thus, be invoked as an efficient mechanism for fluid flow across the cold top-slab mantle layer, hence allowing the slab-derived fluids to ingress in the wedge.
ISSN: 0012-821X

hal-00534035
https://hal.archives-ouvertes.fr/hal-00534035
DOI : 10.1016/j.epsl.2010.06.029

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
We have analyzed the microstructures and crystal preferred orientations (CPO), and calculated the seismic properties of 53 mantle xenoliths from four localities within the North Tanzanian Divergence of the East African rift: two within the rift axis and two in the transverse volcanic belt. Olivine OH concentrations were measured in 15 xenoliths.Most samples have harzburgitic to dunitic compositions and high olivine Mg#. Microstructures and olivine CPO patterns vary strongly depending on the location. In-axis peridotites display mylonitic to porphyroclastic microstructures, which record recent deformation by dislocation creep. Highly stretched orthopyroxenes in mylonites indicate that the deformation was initiated under high stress and probably low temperature. Orthopyroxene replacement by olivine in mylonitic and porphyroclastic peridotites suggest syn-kinematic melt–rock reactions and further deformation under near-solidus conditions. Exsolutions in orthopyroxene imply significant cooling between melt-assisted deformation and xenolith extraction. Late metasomatism is evidenced by the occurrence of veins crosscutting the microstructure and interstitial clinopyroxene and phlogopite. Axial-[100] olivine CPOs predominate, suggesting activation of the high temperature, low pressure [100] {0kl} slip systems and, probably, transtensional deformation. In the volcanic belt, Lashaine peridotites display very coarse-granular textures, indicating deformation by dislocation creep under low deviatoric stress conditions followed by annealing. Axial-[010] olivine CPOs are consistent with transpressional deformation or simultaneous activation of the [100](010) and [001](010) slip systems. Intermediate microstructures and CPOs in Olmani suggests heterogeneous deformation within the volcanic belt. Olivine OH concentrations range between 2 and 12 ppm wt. H2O. No systematic variations are observed between in- and off-axis samples. Maximum P wave azimuthal anisotropy (AVp) ranges between 3.3 and 18.4%, and the maximum S wave polarization anisotropy (AVs) between 2.3 and 13.2%. Comparison between seismic properties of in-axis peridotites and SKS splitting data suggests transtensional deformation in the lithospheric mantle beneath the rift.
ISSN: 0040-1951

hal-01121552
https://hal.archives-ouvertes.fr/hal-01121552
DOI : 10.1016/j.tecto.2014.11.011

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The ultramafic rocks of the Collo region in northeastern Algeria crop out as “stratified” masses that cut across older metamorphic formations of the Petite Kabylie basement. Based on petrological compositions and mineralogical observations, these rocks are mainly peridotites and serpentinites. The peridotites are identified as lherzolites, but dunites may occur rarely. The lherzolites are composed of olivine, orthopyroxene, clinopyroxene and chromian spinel. Their chemical composition shows high MgO (34.4–37.5 wt%), Cr (0.14–0.27 wt%), Ni (0.14–0.26 wt%) and Co (34–133 ppm) contents and low CaO and Al2O3 concentrations (0.02–2.2 wt% and 0.5 to 2.8 wt%, respectively). The chromite, which represents approximately 1–3% of the rock, is ubiquitous and shows two different generations: primary millimetric euhedral crystals and secondary fine xenomorphic grains and interstitial aggregates. The primary chromites are alumino-ferro-magnesian crystals that show high Al2O3 (25.77%–27.36%) and MgO (10.70%–13.36%). Cr# (100 × Cr/(Al + Cr)) ranges from 45 to 48, and Mg# (100 × Mg/(Mg + Fe2+)) from 49 to 59. The secondary interstitial grains are iron-rich chromites. They show low Al2O3 (4.67%–9.54%) and MgO (4.60%–4.65%). Cr# is relatively high (77–88), whereas Mg# shows relatively low values, ranging from 22 to 25. Primary chromite and whole-rock chemistry show that the Collo ultramafic rocks belong to Alpine-type peridotites that were emplaced within an orogenic setting. The oxygen isotopic composition of both peridotites and chromites is consistent with their derivation from a mantle source (δ18O ranges from +3.0 to +5.9‰). Low δ18O values (<+4.4‰) are recorded in serpentinites and are attributed to the effect of serpentinization processes through high-temperature metasomatic fluids. Magnesite-bearing serpentinites show the lowest δ18O values. These are interpreted as the result of surface water input.
ISSN: 0899-5362

hal-01468003
https://hal.archives-ouvertes.fr/hal-01468003
DOI : 10.1016/j.jafrearsci.2016.10.012

Éditeur(s) : HAL CCSD Elsevier
Résumé : Primary arc melts may form through fluxed or adiabatic decompression melting in the mantle wedge, or via a combination of both processes. Major limitations to our understanding of the formation of primary arc melts stem from the fact that most arc lavas are aggregated blends of individual magma batches, further modified by differentiation processes in the sub-arc mantle lithosphere and overlying crust. Primary melt generation is thus masked by these types of second-stage processes. Magma-hosted peridotites sampled as xenoliths in subduction zone magmas are possible remnants of sub-arc mantle and magma generation processes, but are rarely sampled in active arcs. Published studies have emphasised the predominantly harzburgitic lithologies with particularly high modal orthopyroxene in these xenoliths; the former characteristic reflects the refractory nature of these materials consequent to extensive melt depletion of a lherzolitic protolith whereas the latter feature requires additional explanation.Here we present major and minor element data for pristine, mantle-derived, lava-hosted spinel-bearing harzburgite and dunite xenoliths and associated primitive melts from the active Kamchatka and Bismarck arcs. We show that these peridotite suites, and other mantle xenoliths sampled in circum-Pacific arcs, are a distinctive peridotite type not found in other tectonic settings, and are melting residues from hydrous melting of silica-enriched mantle sources. We explore the ability of experimental studies allied with mantle melting parameterisations (pMELTS, Petrolog3) to reproduce the compositions of these arc peridotites, and present a protolith (‘hybrid mantle wedge’) composition that satisfies the available constraints. The composition of peridotite xenoliths recovered from erupted arc magmas plausibly requires their formation initially via interaction of slab-derived components with refractory mantle prior to or during the formation of primary arc melts. The liquid compositions extracted from these hybrid sources are higher in normative quartz and hypersthene (i.e., they have a more silica-saturated character) in comparison with basalts derived from prior melt-depleted asthenospheric mantle beneath ridges. These primary arc melts range from silica-rich picrite to boninite and high-Mg basaltic andesite along a residual spinel harzburgite cotectic. Silica enrichment in the mantle sources of arc-related, subalkaline picrite-boninite-andesite suites coupled with the amount of water and depth of melting, are important for the formation of medium-Fe (‘calc-alkaline’) andesite-dacite-rhyolite suites, key lithologies forming the continental crust.
ISSN: 0016-7037

hal-01553520
https://hal.archives-ouvertes.fr/hal-01553520
DOI : 10.1016/j.gca.2016.09.030

Éditeur(s) : HAL CCSD Springer Verlag (Germany) Springer Verlag
Résumé : International audience
Arenal volcano is nearly unique among arc volcanoes with its 42 year long (1968–2010) continuous, small-scale activity erupting compositionally monotonous basaltic andesites that also dominate the entire, ~7000 year long, eruptive history. Only mineral zoning records reveal that basaltic andesites are the result of complex, open-system processes deriving minerals from a variety of crystallization environments and including the episodic injections of basalt. The condition of the mafic input as well as the generation of crystal-rich basaltic andesites of the recent, 1968–2010, and earlier eruptions were addressed by an experimental study at 200 MPa, 900–1,050 °C, oxidizing and fluid-saturated conditions with various fluid compositions [H2O/(H2O + CO2) = 0.3–1]. Phase equilibria were determined using a phenocryst-poor (~3 vol%) Arenal-like basalt (50.5−wt% SiO2) from a nearby scoria cone containing olivine (Fo92), plagioclase (An86), clinopyroxene (Mg# = 82) and magnetite (Xulvö = 0.13). Experimental melts generally reproduce observed compositional trends among Arenal samples. Small differences between experimental melts and natural rocks can be explained by open-system processes. At low pressure (200 MPa), the mineral assemblage as well as the mineral compositions of the natural basalt were reproduced at 1,000 °C and high water activity. The residual melt at these conditions is basaltic andesitic (55 wt% SiO2) with 5 wt% H2O. The evolution to more evolved magmas observed at Arenal occurred under fluid-saturated conditions but variable fluid compositions. At 1,000 °C and 200 MPa, a decrease of water content by approximately 1 wt% induces significant changes of the mineral assemblage from olivine + clinopyroxene + plagioclase (5 wt% H2O in the melt) to clinopyroxene + plagioclase + orthopyroxene (4 wt% H2O in the melt). Both assemblages are observed in crystal-rich basalt (15 vol%) and basaltic andesites. Experimental data indicate that the lack of orthopyroxene and the presence of amphibole, also observed in basaltic andesitic tephra units, is due to crystallization at nearly water-saturated conditions and temperatures lower than 950 °C. The enigmatic two compositional groups previously known as low- and high-Al2O3 samples at Arenal volcano may be explained by low- and high-pressure crystallization, respectively. Using high-Al as signal of deeper crystallization, first magmas of the 1968–2010 eruption evolved deep in the crust and ascent was relatively fast leaving little time for significant compositional overprint by shallower level crystallization.
ISSN: 0010-7999

hal-01115717
https://hal.archives-ouvertes.fr/hal-01115717
DOI : 10.1007/s00410-014-1040-4

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
To understand the deep cycle of water, upper mantle water content and distribution between nominally anhydrous minerals (NAMs) and hydrous minerals (e.g., amphibole) must be constrained. We need then to understand H behaviour during mantle melting and metasomatism. Major, minor and trace element compositions including water contents were obtained on ten xenoliths of spinel-bearing peridotites from the Ray Pic locality, in the Southern part of the Massif Central (France). The sample suite investigated here is composed of rather fertile lherzolites (89.4 ≤ Fo ≤ 90.8%; 11.3 ≤ cr# in spinel ≤ 21.1%; 0.942 ≤ [Yb]cpx ≤ 1.90 ppm; cpx: clinopyroxene), which can be best explained by batch melting, with degree of melting between 3 and 10%. These xenoliths contain up to 8% modal amphibole. Three groups are defined as a function of the amphibole modal abundance (above or below 1%) and equilibrium temperature (above or below 1000 °C). Results show no clear positive correlation between modal metasomatism (amphibole) and incompatible element enrichment in cpx. Trace element compositions in cpx show strong enrichments of the most incompatible elements (e.g., (La/Sm)PM as high as 15.7; PM: normalised to primitive mantle values), but strong negative anomalies of the high field strength elements (e.g., (Th/Nb)PM as high as ~ 680). Such trace element fractionations are usually ascribed to the so-called carbonatitic metasomatism involving the percolation of small volume melts which are enriched in volatiles. The hydrogen concentrations in cpx range from 203 to 330 ppm wt. H2O, in orthopyroxene from 66 to 160 ppm wt. H2O and in olivine from 2 to 6 ppm wt. H2O. These values are within the common concentration range of other spinel-bearing peridotites. Amphiboles contain 1.9 ± 0.5 wt.% of H2O.The effect of metasomatism on water abundances in NAMs is not straightforward. Hydrous metasomatism (i.e., leading to the crystallisation of OH-bearing amphibole) has no effect on the water content of the co-existing NAMs. This suggests thus that the occurrence of hydrous minerals, such as amphibole, does not systematically imply that the coexisting NAMs are water-rich (saturated). Further, the percolation of volatile-rich small volume melts, which is fingerprinted by the strong enrichment of the incompatible elements, has also no clear effect on the water content of the NAMs. These data are thus difficult to reconcile with the admitted highly incompatible behaviour of H in upper mantle minerals.
ISSN: 0024-4937

hal-01278062
https://hal.archives-ouvertes.fr/hal-01278062
DOI : 10.1016/j.lithos.2015.08.013

Éditeur(s) : HAL CCSD Elsevier
Résumé : The Erro-Tobbio peridotites (Voltri Massif, Ligurian Alps) represent subcontinental lithospheric mantle tectonically exhumed during Permo-Mesozoic extension of the Europe-Adria lithosphere. Previous studies have shown that exhumation started during Permian times, and occurred along kilometer-scale lithospheric shear zones which enhanced progressive deformation and recrystallization from spinel- to plagioclase-facies conditions. Ongoing field and petrologic investigations have revealed that the peridotites experienced, during uplift, a composite history of diffuse melt migration and multiple episodes of ultramafic-mafic intrusions. In this paper we present the results of field, structural and petrologic-geochemical investigations into a sector of the Erro-Tobbio peridotite unit that preserves well this multiple intrusion history. Melt impregnation in the peridotites is evidenced by significant plagioclase enrichment and crystallization of unstrained orthopyroxene replacing kinked mantle olivine and clinopyroxene; impregnating melts were thus opx-saturated. Melt-rock interaction caused chemical changes in mantle minerals (e.g. Al decrease and REE increase in cpx; Ti and Cr# enrichment in spinel). Nevertheless, clinopyroxenes still exhibit LREE depletion (Ce;N;/Sm;N; = 0.006-0.011), indicating a depleted signature for the percolating melts. Melt impregnation was thus related to diffuse porous flow migration of depleted MORB-type melt fractions that modified their compositions towards opx saturation by mantle-melt interaction during ascent. The impregnated peridotites are intruded by a hectometer-scale stratified cumulate body, mostly consisting of troctolites and plagioclase wehrlites, showing gradational, interfingered contacts with the host mantle rocks. Subsequent intrusion events are revealed by the occurrence of olivine gabbros as decameter-wide lenses, variably thick (centimeter- to meter-scale) dykes and thin dykelets, which crosscut both the peridotite foliation and the magmatic layering in the cumulates. Overall, major and trace element compositions of minerals in the intrusives indicate that they represent variably differentiated cumulus products crystallized from rather primitive N-MORB-type aggregated melts. Slightly more evolved compositions are shown by olivine gabbros, relative to the troctolites and plagioclase wehrlites of the cumulate body. Mineral chemistry features (e.g. the Fo-An correlation and high Na, Ti, Mg# in cpx) indicate that the studied intrusive rocks crystallized at moderate pressure conditions (3-5 kbar, i.e. 9-15 km depth). Our study thus points to a progressive transition from porous flow melt migration to emplacement of magmas in fractures, presumably related to progressive change of lithospheric mantle rheology during extension-related uplift and cooling.
ISSN: 0024-4937

hal-00407669
https://hal.archives-ouvertes.fr/hal-00407669
DOI : 10.1016/j.lithos.2006.06.014

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
We studied the deformation in a partially molten mantle through detailed petrostructural analysis of plagioclase lherzolites from the northwestern part of the central Lanzo massif. These peridotites display a pervasive anastomosed network of millimetre to centimetre-scale plagioclase-rich bands, which grades locally into a planar layering marked by an intercalation of plagioclase-rich and olivine-rich layers up to tens of centimetres wide. Both the anastomosed and the planar layering are subparallel to the deformation fabric, characterized by a foliation defined by the shape-preferred orientation of olivine and by crystal preferred orientation (CPO) of olivine, orthopyroxene, and clinopyroxene. This parallelism, the coexistence of microstructural evidence for melt-rock reactions and for deformation by dislocation creep, and the predominance of axial-[010] olivine CPO patterns, characterized by [010] axes clustered normal to the layering, indicate that deformation and the reactive melt percolation that formed the layering were coeval. Strong heterogeneity in mineral composition in the planar layering domains, with Fe-enrichment in olivine and spinel and highly variable Ti content in spinel in cm-scale plagioclase-rich bands, implies that the latter interacted with higher melt volumes. High Ti contents in pyroxenes and spinel in the anastomosed layering domains point to changes in melt composition, hinting to less effective melt transport. We propose therefore that the planar layering records melt segregation in layers parallel to the shear plane, whereas the anastomosed layering results from melt alignment along grain boundaries subparallel to the shear plane, without segregation. Finite strain in the different layers cannot be quantified, but comparison of the present observations with data from experiments and from other mantle outcrops displaying shear-controlled melt organization suggests that the transition from the anastomosed to the planar layering might record an increase in finite strain, that is, strain localization associated with variations in the instantaneous melt fraction.
ISSN: 0040-1951

hal-01053509
https://hal.archives-ouvertes.fr/hal-01053509
DOI : 10.1016/j.tecto.2014.01.007

Éditeur(s) : HAL CCSD Wiley-Blackwell
Résumé : International audience
Garnet growth in high-pressure, mafic garnet granulites formed by dehydration melting of hornblende-gabbronorite protoliths in the Jijal complex (Kohistan palaeo-island arc complex, north Pakistan) was investigated through a microstructural EBSD-SEM and HRTEM study. Composite samples preserve a sharp transition in which the low-pressure precursor is replaced by garnet through a millimetre-sized reaction front. A magmatic foliation in the gabbronorite is defined by mafic-rich layering, with an associated magmatic lineation defined by the shape-preferred orientation (SPO) of mafic clusters composed of orthopyroxene (Opx), clinopyroxene (Cpx), amphibole (Amp) and oxides. The shape of the reaction front is convoluted and oblique to the magmatic layering. Opx, Amp and, to a lesser extent, Cpx show a strong lattice-preferred orientation (LPO) characterized by an alignment of [001] axes parallel to the magmatic lineation in the precursor hornblende-gabbronorite. Product garnet (Grt) also displays a strong LPO. Two of the four < 111 > axes are within the magmatic foliation plane and the density maximum is subparallel to the precursor magmatic lineation. The crystallographic relationship < 111 >(Grt)//[001](Opx,Cpx,Amp) deduced from the LPO was confirmed by TEM observations. The sharp and discontinuous modal and compositional variations observed at the reaction front attest to the kinetic inhibition of prograde solid-state reactions predicted by equilibrium-phase diagrams. The P-T field for the equilibration of Jijal garnet granulites shows that the reaction affinities are 5-10 kJ mol.(-1) for the Grt-in reaction and 0-5 kJ mol.(-1) for the Opx-out reaction. Petrographic and textural observations indicate that garnet first nucleated on amphibole at the rims of mafic clusters; this topotactic replacement resulted in a strong LPO of garnet. Once the amphibole was consumed in the reaction, the parallelism of [001] axes of the mafic-phase reactants favoured the growth of garnet crystals with similar orientations over a pyroxene substrate. These aggregates eventually sintered into single-crystal garnet. In the absence of deformation, the orientation of mafic precursor phases conditioned the nucleation site and the crystallographic orientation of garnet because of topotaxial transformation reactions and homoepitaxial growth of garnet during the formation of high-pressure, mafic garnet-granulite after low-pressure mafic protoliths.
ISSN: 0263-4929

hal-00411323
https://hal.archives-ouvertes.fr/hal-00411323
DOI : 10.1111/J.1525-1314.2008.00789.x

Éditeur(s) : HAL CCSD Mineralogical Society of America
Résumé : International audience
Pressure-temperature divariant melting phase relations of model carbonated peridotite in the system CaO-MgO-Al2O3-SiO2-CO2 from 8 to 12 GPa are reported. From 8 to 12 GPa, melting temperatures on the studied pressure-temperature divariant surface rise quite rapidly. Liquids, in equilibrium with forsterite, orthopyroxene, clinopyroxene, and garnet, on the low-temperature side of the divariant surface are magnesiocarbonatitic in composition. With increasing temperature along an isobar on the pressure-temperature divariant surface, and with the same crystalline phase assemblage, liquids gradually become kimberlitic in their composition. Given the model system data reported here, Group IB kimberlites and perhaps some kimberlites from Greenland, Canada, and South Africa could be generated from direct melting of carbonated peridotite in the pressure range of approximately 6-8 GPa. Some kimberlites from Canada and Russia could have formed by partial melting of carbonated mantle peridotite at pressures of about 10-12 GPa. From 8 to 12 GPa, liquid compositions on the studied divariant surface show a limited compositional range, which implies that the divariant surface is essentially flat. The implied flatness of the divariant surface, and so long as the liquid is in equilibrium with the crystalline assemblage of forsterite + orthopyroxene + clinopyroxene + garnet on the divariant surface, indicate that kimberlites belonging to Group IA and those more magnesian than Group IA cannot have their origin in only being a melting product of carbonated mantle peridotite. The absence of topography of the studied pressure-temperature divariant surface in all likelihood limits the generation of kimberlites in the Earth's upper mantle only.
ISSN: 0003-004X

hal-01053915
https://hal.archives-ouvertes.fr/hal-01053915
DOI : 10.2138/am.2014.4826

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : Solidus phase relations of carbon dioxide-saturated (CO2 vapor) model peridotite in the system CaO-MgO-Al2O3-SiO2-CO2 in the 1.1-2.1 GPa pressure range are reported. The solidus has a positive slope in pressure-temperature (PT) space from 1.1 to 2 GPa. Between 2 and 2.1 GPa, the melting curve changes to a negative slope. From 1.1 to 1.9 GPa, the liquid, best described as CO2-bearing silicate liquid, is in equilibrium with forsterite, orthopyroxene, clinopyroxene, spinel, and vapor. At 2 GPa, the same crystalline phase assemblage plus vapor is in equilibrium with two liquids, which are silicate and carbonatitic in composition, making the solidus at 2 GPa PT invariant. The presence of two liquids is interpreted as being due to liquid immiscibility. Melting reactions written over 1.1-1.9 GPa are peritectic, with forsterite being produced upon melting, and the liquid is silicate in composition. Upon melting at 2.1 GPa, orthopyroxene is produced, and the liquid is carbonatitic in composition. Hence, the invariance between 1.9 and 2.1 GPa is not only the reason for the dramatic change in the liquid composition over an interval of 0.2 GPa, but the carbonated peridotite solidus ledge itself most likely appears because of this PT invariance. It is suggested that because carbonatitic liquid is produced at the highest solidus temperature at 2 GPa in PT space in the system studied, such liquids, in principle, can erupt through liquid immiscibility, as near-primary magmas from depths of approximately 60 km.
ISSN: 0148-0227

hal-00939406
https://hal.archives-ouvertes.fr/hal-00939406
DOI : 10.1002/jgrb.50249

Éditeur(s) : HAL CCSD American Geophysical Union (AGU)
Résumé : Mantle xenoliths in Pliocene alkali basalts of the eastern Betics (SE Iberia, Spain) are spinel ± plagioclase lherzolite, with minor harzburgite and wehrlite, displaying porphyroclastic or equigranular textures. Equigranular peridotites have olivine crystal preferred orientation (CPO) patterns similar to those of porphyroclastic xenoliths but slightly more dispersed. Olivine CPO shows [100]-fiber patterns characterized by strong alignment of [100]-axes subparallel to the stretching lineation and a girdle distribution of [010]-axes normal to it. This pattern is consistent with simple shear or transtensional deformation accommodated by dislocation creep. One xenolith provides evidence for synkinematic reactive percolation of subduction-related Si-rich melts/fluids that resulted in oriented crystallization of orthopyroxene. Despite a seemingly undeformed microstructure, the CPO in orthopyroxenite veins in composite xenoliths is identical to those of pyroxenes in the host peridotite, suggesting late-kinematic crystallization. Based on these observations, we propose that the annealing producing the equigranular microstructures was triggered by melt percolation in the shallow subcontinental lithospheric mantle coeval to the late Neogene formation of veins in composite xenoliths. Calculated seismic properties are characterized by fast propagation of P waves and polarization of fast S waves parallel to olivine [100]-axis (stretching lineation). These data are compatible with present-day seismic anisotropy observations in SE Iberia if the foliations in the lithospheric mantle are steeply dipping and lineations are subhorizontal with ENE strike, implying dominantly horizontal mantle flow in the ENE-WSW direction within vertical planes, that is, subparallel to the paleo-Iberian margin. The measured anisotropy could thus reflect a lithospheric fabric due to strike-slip deformation in the late Miocene in the context of WSW tearing of the subducted south Iberian margin lithosphere.
ISSN: 0278-7407

Droits : info:eu-repo/semantics/OpenAccess
hal-01685809
https://hal.archives-ouvertes.fr/hal-01685809
https://hal.archives-ouvertes.fr/hal-01685809/document
https://hal.archives-ouvertes.fr/hal-01685809/file/Hidas_et_al-2016-Tectonics.pdf
DOI : 10.1002/2016TC004165

Éditeur(s) : HAL CCSD European Geosciences Union
Résumé : International audience
We calculated the seismic properties of 47 mantle xenoliths from 9 kimberlitic pipes in the Kaapvaal craton based on their modal composition, the crystal-preferred orientations (CPO) of olivine, ortho- and clinopyroxene, and garnet, the Fe content of olivine, and the pressures and temperatures at which the rocks were equilibrated. These data allow constraining the variation of seismic anisotropy and velocities within the cratonic mantle. The fastest P and S2 wave propagation directions and the polarization of fast split shear waves (S1) are always subparallel to olivine [100] axes of maximum concentration, which marks the lineation (fossil flow direction). Seismic anisotropy is higher for high olivine contents and stronger CPO. Maximum P wave azimuthal anisotropy (AVp) ranges between 2.5 and 10.2% and the maximum S wave polarization anisotropy (AVs), between 2.7 and 8%. Changes in olivine CPO symmetry result in minor variations in the seismic anisotropy patterns, mainly in the apparent isotropy directions for shear wave splitting. Seismic properties averaged over 20 km-thick depth sections are, therefore, very homogeneous. Based on these data, we predict the anisotropy that would be measured by SKS, Rayleigh (SV) and Love (SH) waves for five endmember orientations of the foliation and lineation. Comparison to seismic anisotropy data from the Kaapvaal shows that the coherent fast directions, but low delay times imaged by SKS studies, and the low azimuthal anisotropy with with the horizontally polarized S waves (SH) faster than the vertically polarized S wave (SV) measured using surface waves are best explained by homogeneously dipping (45°) foliations and lineations in the cratonic mantle lithosphere. Laterally or vertically varying foliation and lineation orientations with a dominantly NW-SE trend might also explain the low measured anisotropies, but this model should also result in backazimuthal variability of the SKS splitting data, not reported in the seismological data. The strong compositional heterogeneity of the Kaapvaal peridotite xenoliths results in up to 3% variation in density and in up to 2.3% variation of Vp, Vs, and Vp / Vs ratio. Fe depletion by melt extraction increases Vp and Vs, but decreases the Vp / Vs ratio and density. Orthopyroxene enrichment due to metasomatism decreases the density and Vp, strongly reducing the Vp / Vs ratio. Garnet enrichment, which was also attributed to metasomatism, increases the density, and in a lesser extent Vp and the Vp / Vs ratio. Comparison of density and seismic velocity profiles calculated using the xenoliths' compositions and equilibration conditions to seismological data in the Kaapvaal highlights that (i) the thickness of the craton is underestimated in some seismic studies and reaches at least 180 km, (ii) the deep sheared peridotites represent very local modifications caused and oversampled by kimberlites, and (iii) seismological models probably underestimate the compositional heterogeneity in the Kaapvaal mantle root, which occurs at a scale much smaller than the one that may be sampled seismologically.
ISSN: 1869-9510

hal-01053516
https://hal.archives-ouvertes.fr/hal-01053516
DOI : 10.5194/se-5-45-2014

Éditeur(s) : HAL CCSD Geological Society
Résumé : Xenoliths from Hawk's Nib (Bute, SW Scotland), entrained in alkali basalt of late Carboniferous–early Permian age, generally possess unrecrystallized igneous cumulate textures. Most are inferred to derive from lower crustal (20–30 km) depths, with a small minority from the underlying restitic mantle. Compositions range from ultramafic cumulates (dunite, wehrlite, websterite, clinopyroxenite) to gabbros and anorthosites. The suite is unique in being dominated by poikilitic wehrlites and olivine clinopyroxenites. Major element variation in the cumulates is controlled by modal mineral variations. The ultramafic cumulates all have high REE contents and light REE (LREE)-enriched patterns, with websterites being the least enriched. Gabbroic xenoliths have uniform patterns in which both LREE and heavy REE are depleted relative to the middle REE, with small positive Eu anomalies. Present-day Sr–Nd isotopic data for the suite are the most depleted among Scottish xenoliths. The xenoliths are inferred to be products of young replenishments of the lower crust by basaltic magmas during continental underplating. Orthopyroxene-bearing lithologies crystallized from tholeiitic magmas whereas alkali basalts formed the clinopyroxene-rich samples; both parental magma-types were derived from similar mantle sources.
ISSN: 0016-7649

hal-00407203
https://hal.archives-ouvertes.fr/hal-00407203
DOI : 10.1144/0016-76492006-177

Éditeur(s) : HAL CCSD
Résumé : This PhD work is based on field, petrographic, and geochemical observations of rocks originated at the base of the sheeted dike complex, in the Oman ophiolite and at IODP Site 1256, coupled with an experimental study. It provides new constrains on processes that occur at the magma / hydrothermal system transition in oceanic crust formed at fast spreading ridges. The base of the sheeted dike complex is truncated by intrusive isotropic gabbros, and therefore reheated and recrystallized to the "granoblastic dikes" under temperatures up to 1030°C. Xenoliths of granoblastic microgabbros and microgabbronorites derived from the granoblastic dikes are commonly observed in the about 100 meters thick horizon of isotropic gabbro that underlies the sheeted dike complex. These features can be explained by upward migrations of the melt lens that is present at fast spreading centers. The occurrence of several assimilation features (xenoliths and granoblastic patches) in the isotropic gabbro horizon supports the hypothesis that this horizon represents the fossilization of the upper melt lens. The experimental study was designed to simulate experimentally the effect of partial melting of hydrothermally altered sheeted dikes. The results show that melting starts at 850°C, confirm the residual origin of granoblastic dikes and xenoliths, and attest to the anatectic origin of the oceanic plagiogranites that are commonly present close to the base of the sheeted dike complex. The major and trace element composition of the experimental anatectic melt that represents the main contaminant for primitive MORBs at fast spreading ridges has been determined. The upper axial melt lens at fast spreading mid-ocean ridges is herein described as a dynamic system that can migrate vertically, and which fossilizes when moving off-axis.
Ce travail de thèse est basé sur des observations de terrain, sur une étude pétrographique et géochimique des roches formées à la base du complexe filonien dans l'ophiolite d'Oman et au niveau du Site IODP 1256, ainsi que sur une étude expérimentale. De nouvelles contraintes sont apportées sur les processus se produisant à la transition magma / système hydrothermal dans la croute océanique formée au niveau des dorsales à expansion rapide. L'intrusion de gabbros isotropes dans la base du complexe filonien a provoqué son réchauffement et sa recrystallization en « dikes granoblastiques » jusqu'à des températures de 1030°C. Des xénolites de microgabbro à orthopyroxene dérivées des dikes granoblastiques sont souvent observées dans le niveau de gabbros isotropes épais de 100 mètres environ qui est présent à la base du complexe filonien. Ces différentes caractéristiques sont à relier à des migrations verticales vers le haut du sommet de la lentille magmatique supérieure qui est observée aux dorsales rapides. Les nombreuses évidences d'assimilation (xénolites et patchs granoblastiques) dans le niveau des gabbros isotropes appuient l'hypothèse que ce niveau représente la fossilisation de la lentille magmatique supérieure. L'étude expérimentale a consisté à tester l'effet de la fusion partielle du complexe filonien préalablement hydrothermalisé. Les résultats montrent que la fusion commence à 850°C, confirment l'origine résiduelle des dikes granoblastiques et des xénolites associées, et attestent de l'origine anatectique des plagiogranites océaniques qui sont couramment observés à proximité de la base du complexe filonien. La composition en éléments majeurs et traces du liquide anatectique a été déterminée. Ce liquide représente le principal contaminant pour les MORBs primitifs émis au niveau des dorsales rapides. La lentille magmatique supérieure présente au niveau des dorsales médio-océaniques à expansion rapide est ici décrite comme un système dynamique qui peut migrer verticalement, et qui est fossilisée lorsqu'elle se déplace hors axe.
https://tel.archives-ouvertes.fr/tel-00448699

tel-00448699
https://tel.archives-ouvertes.fr/tel-00448699
https://tel.archives-ouvertes.fr/tel-00448699/document
https://tel.archives-ouvertes.fr/tel-00448699/file/France_2009_PhD.pdf

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
We provide results of a detailed study of the first peridotite xenoliths of proven mantle origin reported from Bezymyanny volcano in the Klyuchevskoy Group, northern Kamchatka arc. The xenoliths are coarse spinel harzburgites made up mainly of Mg-rich olivine as well as subhedral orthopyroxene (opx) and Cr-rich spinel, and also contain fine-grained interstitial pyroxenes, amphibole and feldspar. The samples are unique in preserving the evidence for both initial arc mantle substrate produced by high-degree melt extraction and subsequent enrichment events. We show that the textures, modal and major oxide compositions of the Bezymyanny xenoliths are generally similar to those of spinel harzburgite xenoliths from Avacha volcano in southern Kamchatka. However, coarse opx from the Bezymyanny harzburgites has higher abundances of light and medium rare earth elements and other highly incompatible elements than coarse opx from the Avacha harzburgites. We infer that (1) the sub-arc lithospheric mantle beneath both Avacha and Bezymyanny (and possibly between these volcanoes) consists predominantly of harzburgitic melting residues, which experienced metasomatism by slab-related fluids or low-fraction, fluid-rich melts and (2) the degrees of metasomatism are higher beneath Bezymyanny. By contrast, xenolith suites from Shiveluch and Kharchinsky volcanoes 50-100 km north of the Klyuchevskoy Group include abundant cumulates and products of reaction of mantle rocks with silicate melts at high melt/rock ratios. The high melt flux through the lithospheric mantle beneath Shiveluch and Kharchinsky may be related to the asthenospheric flow around the northern edge of the sinking Pacific plate; lateral propagation of fluids in the mantle wedge south of the plate edge may contribute to metasomatism in the mantle lithosphere beneath the Klyuchevskoy Group volcanoes.
ISSN: 0377-0273

hal-00941258
https://hal.archives-ouvertes.fr/hal-00941258
DOI : 10.1016/j.jvolgeores.2012.12.022

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Peridotite xenoliths with a broad range of textures provides evidence for consistent microstructural evolution in a vertical transect of the shallow lithospheric mantle (35?55 km depth) beneath the Persani Mountains, SE Carpathians, Romania, due to ongoing plate convergence in the Carpathian Arc nearby. The recrystallized grain size, crystal preferred orientations strength, and resulting seismic anisotropy vary continuously and display a strong correlation to equilibrium temperatures, suggesting a continuous change in deformation conditions with depth. The shallowmost xenoliths have microstructures typical of high stress deformation, marked by strong recrystallization to fine grain sizes, which results in weak crystal preferred orientations and anisotropy. The deepest xenoliths have coarse-grained porphyroclastic microstructures and strong crystal preferred orientations. Replacive orthopyroxene structures, consuming olivine, and high H2O concentrations in the pyroxenes are observed in some xenoliths indicating limited percolation of fluids or volatile-rich melts. Despite the high stress deformation and high H2O contents in some of the studied xenoliths, analysis of olivine crystallographic orientations indicates that [100] slip systems, rather than ?wet? [001] accommodate most of the deformation in all samples. Seismic anisotropy estimated from the measured olivine and pyroxene crystal preferred orientations suggests that the strike-parallel fast SKS polarization directions and ~ 1 s delay times measured in the SE Carpathians are likely the consequence of convergence-driven belt-parallel flow in the lithospheric mantle.
ISSN: 0012-821X

hal-00317303
https://hal.archives-ouvertes.fr/hal-00317303
DOI : 10.1016/J.EPSL.2008.04.035