Éditeur(s) : HAL CCSD Taylor & Francis
Résumé : New structural data and P-T estimates of syn-deformational assemblages within the Beni Bousera peridotites and their crustal envelope are used to explain their Alpine exhumation. The Beni Bousera peridotites occur as thin sheets within high grade crustal units of the lower Sebtides (inner Rif, Morocco) and are composed of weakly deformed spinel lherzolite in the core of the massif and garnet-spinel mylonite at the rim. The main foliation trajectories in both the peridotites and overlying crustal units show systematic rotation towards their mutual contact, indicating a kilometer-scale top to the NW shearing with a dextral component along this crust/mantle contact. Widespread top to the NW shear criteria within the crustal units overlying the peridotite support this feature. Available ages constrain the development of the main foliation in both the peridotites and crustal rocks between 25 and 20 Ma. New P-T data from the peridotites show that deformation occurs during decompression from approximate to 22 kbar, 1050 degrees C to approximate to 9-15 kbar, 800 degrees C. As a consequence, exhumation of the Beni Bousera peridotites takes place during the Oligo-Miocene lithosphere thinning in the footwall of a lithospheric extensional shear zone. The exceptional preservation of garnet within the mylonitic peridotites results from rapid cooling of the border of the massif due to the juxtaposition with colder crustal rocks along this shear zone. Uplifting of the hot mantle rocks simultaneously induces high temperature metamorphism in the overlying crustal units. These new findings allow us to reconstruct the deformation history of the Beni Bousera region and the Alboran domain in the framework of the western Mediterranean geodynamics during the last 40 Myrs.. (C) 2011 Lavoisier SAS. All rights reserved
ISSN: 0985-3111

hal-00767654
https://hal.archives-ouvertes.fr/hal-00767654
DOI : 10.3166/ga.24.49-60

Éditeur(s) : HAL CCSD Wiley-Blackwell
Résumé : Combined petrographic study and apatite fission track analysis (apatite FTA) across the Gres d'Annot basin document maximum temperatures reached by this turbiditic sandstone formation, from around 60 degrees C at the SW basin margin up to around 200 degrees C below the Penninic frontal thrust, in relation to burial below the front of Alpine nappes. Increasing diagenetic grade across the basin is primarily expressed by the development of silica transfer by pressure solution and correlated porosity loss. We infer the nappe thickness profile, from the nappe front in the SW up to around 8-10 km in the NE. Apatite FTA dates exhumation of the Gres d'Annot during the Late Miocene, in relation to thrusting of the underlying Argentera and Barrot Palaeozoic massifs. This study illustrates the influence of thrust front propagation on foreland basin diagenesis and exhumation, and highlights potential implications for the evolution of sediment reservoir properties in this context.
ISSN: 0954-4879

hal-00411860
https://hal.archives-ouvertes.fr/hal-00411860
DOI : 10.1111/j.1365-3121.2008.00793.x

Éditeur(s) : HAL CCSD Mineralogical Society of America
Résumé : International audience
Accessory phases are important hosts of trace elements; allanite may contain >90% of the REE in a bulk rock. The mobility and redistribution of several trace elements, notably HREE, Th, U, and Y is thus controlled by reactions involving allanite and other REE phases, as well as several rock-forming minerals. As these elements are commonly concentrated in mature elastic sediments, a suite of impure quartzite was studied. Two eclogite facies samples from the Monometamorphic Cover Complex of the Sesia Zone (Western Italian Alps) are presented in some detail, as they reveal a remarkably rich spectrum of reaction relationships that involve REE phases.;Two allanite-forming reactions were inferred from textures and phase compositions;(1) monazite + Ca-silicate(?) + fluid -> allanite + apatite + thorite;;(2) monazite + thorite + Ca-silicate(?) + fluid -> Th-rich allanite + auerlite +/- apatite.;Petrographic observations and thermodynamic models suggest that allanite entered the HP assemblage at similar to 530 degrees C and 17-18 kbar during prograde metamorphism.;In one sample, allanite is rimmed by epidote rich in Y and HREE that grew at the expense of xenotime. Two net transfer reactions were derived;(3) xenotime + allanite + fluid -> Y-rich epidote + apatite + thorite;;(4) xenotime + allanite + fluid -> Y-rich epidote + aeschynite + thorite + (phosphate?).;Textural relationships and trace element analyses of coexisting allanite/monazite and xenotime/Y-rich epidote reveal systematic partitioning of the REE. Partition coefficients for the HREE are compatible with equilibrium fractionation, whereas those for the LREE show patterns that seem to be inherited from the precursor phases, in this case zircon with variable LREE composition.
ISSN: 0003-004X

hal-00745674
https://hal.archives-ouvertes.fr/hal-00745674
DOI : 10.2138/am.2012.3832

Éditeur(s) : HAL CCSD
Résumé : Fault zones are major discontinuities in sedimentary basins. Understanding their role on fluid migrations is an essential issue to (i) characterize the mechanisms and kinematics of deformation and (ii) to determine the parameters which control the distribution of energetic or mineral resources. This work applies to faulting under a temperature range of 200-250°C, corresponding to that of deeply buried reservoirs as well as potentially seismogenic fault zones. The studied faults are normal faults affecting the “Grès d’Annot” Formation, a Priabonian-Rupelian siliclastic turbidite succession of the Alpine foreland basin. They are located in two distinct areas: the Moutière-Restefond area in the eastern part of the basin and the Estrop area in the western part. Vitrinite reflectance outside fault zones indicates maximal temperatures of 240-260°C at Moutière-Restefond and 170-200°C at Estrop, i.e. burial depths around 8 km and 6 km, respectively, assuming a mean geothermal gradient of 30°C/km. Burial was due to underthrusting below the Embrunais-Ubaye Alpine nappes, the difference in burial between the two areas traducing the westward taper of the nappe front.The studied faults affect alternating arkosic sandstone beds and pelite layers with offsets from centimeters to decameters. Two types of core zones are recognized: (1) the foliated core zones of the Moutière-Restefond area, where deformation dominated by pressure solution and synkinematic phyllosilicate neoformation resulted in a foliated fabric, and (2) the core zones of the Estrop area, characterized by dilatant quartz-mineralized veins and breccia. Fault and host rock petrophysical properties were measured on drill plugs, using the water porosity technique and nitrogen permeability technique under 2 Mpa of confining pressure. In the Moutière-Restefond fault zones, plug axes were oriented in three orthogonal directions corresponding to the main deformation axes (X, Y, Z) of the foliated arkose to characterize the effect of structural anisotropy. In the Estrop fault zones, where deformation does not show equivalent anisotropy, the plug axes were oriented according to the main fault plane orientation (i.e., parallel to azimuth, parallel to dip and normal). In each fault zone, the porosity of fault rocks is equivalent to that of host rocks. In the Moutière-Restefond fault zones, the plugs parallel to the X and Z axes of deformation have a permeability similar to that of the host rocks, whereas permeability parallel to the Y axis (i.e. parallel to the foliation and the main fault plane) is one order of magnitude higher. By contrast, the permeability values in the Estrop fault zones are isotropic and equivalent to the host rock values. This study highlights the importance of various types of deformation mechanisms and related fluid-rock interactions in determining different fault rock types within a similar protolith, ultimately controlling distinct petrophysical properties of fault zones.
Les zones de failles constituent des discontinuités majeures dans la croûte supérieure. Ce mémoire s’intéresse aux failles actives à des profondeurs de 5-8 km, i.e. dans des conditions pouvant jouer un rôle important (i) sur le comportement mécanique de de la croûte, en particulier sur son potentiel sismogénique et (ii) sur la compartimentation des réservoirs géologiques profondément enfouis.Les failles étudiées sont des failles normales (rejet jusqu’à 50 mètres) affectant des alternances de bancs de grès arkosiques et de pélites dans les Grès d’Annot, une formation turbiditique d’âge priabonien-rupélien du bassin d’avant-chaine alpin. Les Grès d’Annot ont été enfouis sous les nappes de l’Embrunais-Ubaye peu de temps après leur dépôt et exhumés au Miocène moyen-supérieur. L’étude a été réalisée dans deux secteurs des Alpes de Haute-Provence, (1) le secteur de l’Estrop (chaine des Trois Evéchés, dans la partie occidentale du bassin) et (2) le secteur de Point Vert-Restefond (alentours du col de la Bonette, dans la partie orientale du bassin). La réflectance de la vitrinite dans les Grès d’Annot indique des températures maximales de 160-190°C dans le secteur (1) et de 240-260 °C dans le secteur (2) , soit des profondeurs d’enfouissement de 5-6 km et 8-10 km, respectivement, dans l’hypothèse d’un gradient géothermique moyen de 25-30°C/km. A partir des observations microstructurales, de données d’inclusions de fluides, de modélisations thermodynamiques sur chlorites syncinématiques et des indices de cristallinité de l’illite, on a établi que les failles du secteur (1) ont fonctionné à une température d’environ 200°C pour une pression de 0.6Kbar et celles du secteur (2) dans une gamme de température de 200-220°C et de pression comprise entre 0.6 et 1.1 Kba. L’activité de la faille de Point-Vert a été datée par la méthode 40Ar/39Ar au Miocène inférieur (21 Ma). Ces failles sont interprétées comme associées aux premiers stades du soulèvement résultant de l’activité des chevauchements dans le socle sous-jacent.Deux types principaux de roches de failles caractérisent les failles étudiées. Les brèches dilatantes sont majoritaires dans les zones de failles du secteur (1) alors que les arkoses foliées sont majoritaires dans les zones de failles du secteur (2). Les brèches dilatantes témoignent de mécanismes de déformation dominés par la fracturation transgranulaire et la pression-solution des silicates. Ce dernier mécanisme se manifeste principalement par d’abondantes précipitations cycliques de quartz, les stylolites restant peu développés. Les géométries structurales sont associées à l’activation de plans T de Riedel déterminant l’ouverture de relais extensifs et un régime localement dilatant. Nous associons ce type de roche de faille à une faible pression effective au cours de la déformation.La déformation cisaillante exprimée dans les arkoses foliées témoigne de mécanismes de déformation dominés par (i) la fracturation intragranulaire et transgranulaire, (ii) la pressionsolution/ précipitation des silicates, principalement le quartz, (iii) la néoformation de micas blancs liée à l’altération des feldspaths et (iv) la précipitation de chlorite. Ce travail montre également que les transformations minéralogiques liées aux interactions fluide-roche dans la zone de faille (forte augmentation de la proportion des phyllosilicates au dépend des feldspaths) changent radicalementla composition minéralogique de la roche. Nous associons ce type de roche de faille à une forte pression effective au cours de la déformation.La pétrophysique montre que les brèches de failles (secteur 1) ont une perméabilité isotrope et équivalente à celle du protolithe (10-3mD sous 2 MPa de confinement) tandis que les roches foliées (secteur 2) montrent une augmentation de perméabilité (10-2mD) selon l’axe Y de la déformation, d’un ordre de grandeur supérieure aux perméabilités suivant les axes X et Z et dans la roche hôte (10-3mD). Ce drain préférentiel potentiel est associé à l’orientation des phyllosilicates dans la foliation.
https://hal.archives-ouvertes.fr/tel-01310382

tel-01310382
https://hal.archives-ouvertes.fr/tel-01310382
https://hal.archives-ouvertes.fr/tel-01310382/document
https://hal.archives-ouvertes.fr/tel-01310382/file/Th%C3%A8seCAVAILHES2012.pdf

Éditeur(s) : HAL CCSD Oxford University Press (OUP)
Résumé : International audience
Convergent plate margins typically experience a transition from subduction to collision dynamics as massive continental blocks enter the subduction channel. Studies of high-pressure rocks indicate that tectonic fragments are rapidly exhumed from eclogite facies to mid-crustal levels, but the details of such dynamics are controversial. To understand the dynamics of a subduction channel we report the results of a petrochronological study from the central Sesia Zone, a key element of the internal Western Alps. This comprises two polymetamorphic basement complexes (Eclogitic Micaschist Complex and Gneiss Minuti Complex) and a thin, dismembered cover sequence (Scalaro Unit) associated with pre-Alpine metagabbros and metasediments (Bonze Unit). Structurally controlled samples from three of these units (Eclogitic Micaschist Complex and Scalaro-Bonze Units) yield unequivocal petrological and geochronological evidence of two distinct high-pressure stages. Ages (U-Th-Pb) of growth zones in accessory allanite and zircon, combined with inclusion and textural relationships, can be tied to the multi-stage evolution of single samples. Two independent tectono-metamorphic 'slices' showing a coherent metamorphic evolution during a given time interval have been recognized: the Fondo slice (which includes Scalaro and Bonze rocks) and the Druer slice (belonging to the Eclogitic Micaschist Complex). The new data indicate separate stages of deformation at eclogite-facies conditions for each recognized independent kilometer-sized tectono-metamorphic slice, between ∼85 and 60 Ma, with evidence of intermittent decompression (ΔP ∼ 0*5 GPa) within only the Fondo slice. The evolution path of the Druer slice indicates a different P-T-time evolution with prolonged eclogite-facies metamorphism between ∼85 and 75 Ma. Our approach, combining structural, petrological and geochronological techniques, yields field-based constraints on the duration and rates of dynamics within a subduction channel.
ISSN: 0022-3530

hal-01054335
https://hal.archives-ouvertes.fr/hal-01054335
DOI : 10.1093/petrology/egu029

Éditeur(s) : HAL CCSD American Geophysical Union (AGU)
Résumé : International audience
Deciphering Variscan versus Alpine history in the internal Rif system is a key to constraining the tectonic evolution of the Alboran domain and hence the geodynamics of the western Mediterranean system during the Cenozoic. This study focuses on the evolution of the metamorphic envelope of the Beni Bousera massif and its relation to the underlying peridotites. Combining structural geology, metamorphic petrology, and LA-ICP-MS U-Th-Pb dating of monazite, this study contributes to the understanding of the tectonic history of the western internal Rif. The regional foliation (S2) is characterized by LP/HT mineral assemblages and obliterates a former foliation (S1) developed along a barrovian (MP/MT) metamorphic gradient. The dating of some metamorphic monazite grains from a micaschist and a migmatitic gneiss demonstrates that the crustal envelope of the peridotite recorded two distinct tectonometamorphic episodes. Data from monazite inclusions in S1 garnet suggest that the first event, D1, is older than 250-170 Ma and likely related to the Variscan collision, in agreement with the barrovian type of the metamorphic gradient. The second event, D2, is Alpine in age (at circa 21 Ma) and corresponds to a strong lithosphere thinning allowing subsequent subcontinental mantle exhumation. Such a tectonic context provides an explanation for the LP/HT metamorphic gradient that is recorded in the regional foliation of the western Betic-Rif system. This extension is probably related to a subduction slab roll-back in the western end of the Mediterranean realm during the Oligo-Miocene times. No evidences for a Tertiary HP/LT metamorphism have been identified in the studied area
ISSN: 0278-7407

Droits : info:eu-repo/semantics/OpenAccess
insu-01152517
https://hal-insu.archives-ouvertes.fr/insu-01152517
https://hal-insu.archives-ouvertes.fr/insu-01152517/document
https://hal-insu.archives-ouvertes.fr/insu-01152517/file/gueydan-2015.pdf
DOI : 10.1002/2014TC003769

Éditeur(s) : HAL CCSD
Résumé : International audience
In the external Western Alps, the collision started with the shortening of the proximal European (Dauphinois) margin. One peculiar feature is the crustal thickening that finally led to the exhumation of the basement External Crystalline Massifs (ECM) during the Neogene. In these massifs, various age of shortening, structural style and sequence of deformation have been proposed leading to different kinematics along the Alpine arc that in turn do not imply the same crustal/lithospheric strength. In this contribution, we present new structural and microstructural data along with Ar/Ar ages from field studies in the Oisans-Grandes Rousses massifs, between Grenoble and Briançon). From balanced cross-sections, we show that about half of the external zone crustal shortening is accommodated within the ECM with similar Ar/Ar ages in all massifs. Furthermore, the shear zones present very large thicknesses (several hundred meters) and do not reactivated either the inherited Liassic normal faults or the Variscan foliation. Finally, the main shortening structures are localized beneath inherited Liassic syn-rift basins. These results suggest that the crust was weak during its shortening. Such behavior is most likely due to the combination of several factors: the crust burial (below the overthrusting internal units) down to about 10km, the presence of weak inherited syn-rift basins, and the strain softening in shear zones that evolve in mica-rich phyllonites. These results are consistent with the studies in the Aar massif and should most likely apply to the Mont Blanc massif, whose relationships with its cover are still debated.
EGU General Assembly
Vienne, Austria

insu-00839426
https://hal-insu.archives-ouvertes.fr/insu-00839426
BIBCODE : 2013EGUGA..15.8837B

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Upon subduction, the oceanic crust transforms to blueschists and eclogites, with seismic properties that gradually become similar to those of the surrounding mantle. In order to evaluate the anisotropy of blueschists and glaucophane-bearing eclogites, the elastic constants of glaucophane single-crystal plates from the Sesia-Lanzo Zone (Aosta Valley, Western Alps) were measured using Brillouin spectroscopy at ambient conditions. The mean P- and S-wave velocities are 7.8 and 4.6 km s−1 respectively, and the anisotropy is high (38.1% (AVP) and 27.3% (AVS)). Glaucophane develops strong LPO, characterized by the [001]-axes concentrated sub-parallel to the lineation, and the {110} poles concentrated sub-perpendicular to the foliation in both blueschist and eclogite rocks. The measured LPO is in good agreement with viscoplastic selfconsistent numerical models. Seismic properties of glaucophane-bearing blueschist and eclogite are calculated by combining measured LPO and the single-crystal elastic moduli of glaucophane with the other main mineral constituents of the rock: mostly epidote for blueschist, and omphacite and garnet for eclogite. Blueschists present stronger anisotropies (AVP=16.1% and AVS=10.3%) than eclogites (AVP=2.9% and AVS=1.7%). The shear-wave splitting and resulting delay times for a 7-km thick layer of eclogite or blueschist are low for the eclogite (b0.03 s), but signi!cant for blueschist (0.16 s). Application to the subducted oceanic crust yields a decrease of velocity contrast with the surrounding mantle and of anisotropy at depth depending on the temperature of the slab. The details of the velocity variations in subducted oceanic crust are dif!cult to reconcile with the blueschist-eclogite transition as probed by exhumed metamorphic rocks and may require additional phases such as lawsonite or chemical variations such as oxidation state.
ISSN: 0040-1951

hal-00564518
https://hal.archives-ouvertes.fr/hal-00564518
DOI : 10.1016/j.tecto.2010.09.011

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The Maghrebides, Betics and some parts of the Calabrian, NE Sicilian and Tuscan allochtons constitute dismembered fragments of the Alpine belt that resulted from the Cenozoic collision between Africa and Eurasia and the opening of the Western Mediterranean basin. Mineral and whole-rock geochemical analyses have been performed on three distinct outcrops of mantle material from the Edough Massif of NE Algeria, namely the Bou Maiza (BM) gabbros, the La Voile Noire (LVN) amphibolites and the Sidi Mohamed (SM) peridotites. In all samples, Sr isotopes are largely affected by seawater alteration (87Sr/86Sract. > 0.70384 and up to 0.70888) and cannot be used to evaluate the nature of the source reservoirs. SM peridotites display variable depleted mantle Nd isotopic signatures (εNdact. from + 7.0 to + 12.2) and geochemical features suggesting no significant chemical depletion as a result of partial melting and melt extraction (Mg# < 90; slightly LREE-depleted patterns with La/YbN = 0.33-0.39). These rocks are interpreted as parts of the subcontinental lithospheric mantle incorporated into the crustal units of the Edough Massif during the early stages of opening of the Algerian basin. BM gabbros and LVN amphibolites show geochemical signatures indicating derivation from a common Depleted Mantle reservoir (εNd > + 7.9) and are likely cogenetic, but without filiation with the SM peridotites. Pb isotopes indicate a contribution of sediments in the source reservoir, which is attributed to contamination solely by hydrous fluids released from a sedimentary component. This observation, together with a LILE-enrichment, suggests a back-arc basin environment. These results indicate that BM and LVN units were obducted onto the North African margin and subsequently fragmented, probably during doming and exhumation of the lower continental crust of the Edough massif. Doming resulted in opposite movements of the overlying oceanic units, southward for the BM units and northward for LVN amphibolites.
ISSN: 0040-1951

hal-01122777
https://hal.archives-ouvertes.fr/hal-01122777
DOI : 10.1016/j.tecto.2014.03.031

Éditeur(s) : Elsevier Science Bv
Résumé : The timing, routing and processes of sediment transfer from the continents to the oceans at millennial time-scale are still largely unknown. The potential of turbidite systems (dominantly deposited during sea-level lowstands) to record global or regional environmental fluctuations is usually under-exploited because of the difficulty to obtain robust chronostratigraphic constraints in turbiditic deposits, and therefore to tie changes in sedimentary processes to environmental fluctuations. We were able to obtain a millennial-scale chronostratigraphy based on oxygen isotopes of the scarce foraminifera preserved in turbiditic deposits of the Rhone Turbidite System within the Western Mediterranean. Our results show that 1) objective criteria can be defined for the selection of foraminifera preserved within the pelagic intervals between the turbiditic sequences, in order to obtain a reliable isotope stratigraphy; 2) Turbidites triggered by hyperpycnal currents are described for the first time within the Rhone Turbidite System. They are related to the periods of direct fluvial connection with the canyon head (during the sea-level lowstand and early rise), and to a period of high sediment flux in relation with the massive recession of the Rhone glaciers in the Alps; 3) The lithofacies change passing from hyperpycnal to “Bouma-type” is dated at ca 19 cal. ka BP, which might correspond to an acceleration of sea-level rise (19-ka Meltwater Pulse,).
Sedimentary Geology (0037-0738) (Elsevier Science Bv), 2015-06 , Vol. 323 , P. 148-166

Droits : 2015 Elsevier B.V. All rights reserved.
http://archimer.ifremer.fr/doc/00266/37712/35730.pdf
DOI:10.1016/j.sedgeo.2015.04.009
http://archimer.ifremer.fr/doc/00266/37712/

Éditeur(s) : HAL CCSD Geological Society of America
Résumé : International audience
Mechanisms that control seismic activity in low strain rate areas such as western Europe remain poorly understood. For example, in spite of low shortening rates of <0.5 mm/ yr, the Western Alps and the Pyrenees are underlain by moderate but frequent seismicity detectable by instruments. Beneath the elevated part of these mountain ranges, analysis of earthquake focal mechanisms indicates extension, which is commonly interpreted as the result of gravitational collapse. Here we show that erosional processes are the predominant control on present-day deformation and seismicity. We demonstrate, using fi nite element modeling, that erosion induces extension and rock uplift of the elevated region of mountain ranges accommodating relatively low overall convergence. Our results suggest that an erosion rate of ~1 mm/yr can lead to extension in mountain ranges accommodating signifi cant shortening of <3 mm/yr. Based on this study, the seismotectonic framework and seismic hazard assessment for low strain rate areas need to be revisited, because erosion-related earthquakes could increase seismic hazard.
ISSN: 0091-7613

insu-00817341
https://hal-insu.archives-ouvertes.fr/insu-00817341
DOI : 10.1130/G33942.1

Éditeur(s) : HAL CCSD
Résumé : The northern Mirdita ophiolite massifs in Albanian Dinarides formed at a slow-spreading ridge, active during the Jurassic (160–165 Ma). They share a common horizontal Jurassic–Lower Cretaceous sedimentary cover showing that they were not deeply and intrinsically affected by later Alpine thrusting. The western massifs of Mirdita, first oceanic core complex (OCC) and detachment shear zone described in ophiolites, compare with OCCs in slow-spreading ridges and provide continuous exposure of the deep internal structure of this system, revealing its kinematics, thanks to detailed structural mapping in peridotites and gabbros. The Mirdita detachments root in the Moho transition zone (MTZ), a weak zone at the top of asthenospheric mantle, where basaltic melts impregnate dunites. The OCC domes are plagioclase-amphibole–bearing mylonitic peridotites, ∼400 m thick, grading downward within 200 m to harzburgitic mantle. The mylonitic detachments crossed Moho beneath a NNE-SSW–trending ridge. On the western side of OCC domes, the hanging wall of the ridge, crustal gabbros, and basalts are still preserved, despite being deeply affected by hydrothermal alteration. From there, the partially molten MTZ was detached as a shear zone, mixing with lower gabbros. The OCC emerged, migrating upsection and eastward over 5 km. Finally, the OCC front is observed in hornblende-rich syntectonic mylonites derived from upper gabbros and from the overlying former lid. Serpentinization is static within these mylonites. A low-temperature detachment fault is expressed as a sheared antigoritic mélange at the margin of the mylonitic shear zone. Asthenospheric flow in the harzburgitic mantle beneath the ridge of origin has been preserved below the OCC rooting. The dominant asthenospheric flow direction trends parallel to the ridge axis. This mantle flow rotates over 200 m into the low-temperature mylonitic detachments, where OCC motion turns transversal to the ridge. Crystal preferred orientation measurements on six samples point to brown hornblende crystal growth during mylonitic flow and illustrate the change of olivine intra-crystalline slip system in mylonites compared to porphyroclastic harzburgite.
ISSN: 1553-040X

hal-01504440
https://hal.archives-ouvertes.fr/hal-01504440
DOI : 10.1130/GES01383.1

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
A dense, local network of 30 geodetic markers covering a 50 × 60 km2 area in the southwestern European Alps (Briançon region) has been temporarily surveyed in 1996, 2006 and 2011 by GPS. The aim is to measure the current deformation in this seismically active area. The study zone is characterized by a majority of extensional and dextral focal mechanisms, along north–south to N160 oriented faults. The combined analysis of the three measurement campaigns over 15 years and up to 16 years of permanent GPS data from the French RENAG network now enables to assess horizontal velocities below 1 mm/year within the local network. The long observation interval and the redundancy of the dense campaign network measurement help to constrain a significant local deformation pattern in the Briançon region, yielding an average E–W extension of 16 ± 11 nanostrain/year. We compare the geodetic deformation field to the seismic deformation rate cumulated over 37 years, and obtain good coherencies both in amplitude and direction. Moreover, the horizontal deformation localized in the Briançon region represents a major part of the Adriatic-European relative plate motion. However, the average uplift of the network in an extensional setting needs the presence of buoyancy forces in addition to plate tectonics.
ISSN: 0264-3707

hal-01119724
https://hal.archives-ouvertes.fr/hal-01119724
DOI : 10.1016/j.jog.2015.02.001

Éditeur(s) : HAL CCSD
Résumé : International audience
The Rif Chain (Northern Morocco) belongs, with the Betic Cordillera(Southern Spain), to the western termination of the Alpine belt. Deepestunits of the Rif Internal Zones (i.e. Lower Sebtides) outcrop in three areas, from North to South : Ceuta, Cabo Negro and Beni Bousera.The quick exhumation of these units during the Late Oligocene-EarlyMiocene is related with a crustal thinning and the Alboran Sea rifting.Despite Beni Bousera massif has been well investigated, no data areavailable in Ceuta and Cabo Negro areas. This study aims to constrainthe last steps of cooling and exhumation in the Lower Sebtides usingmedium- and low-temperature thermochronological data. Combinationof Ar-Ar on micas, fission tracks and (U-Th)/He on apatites (respectivelyAFT and AHe) from high-grade rocks allows understanding thermalhistory between 450-350°C and surface temperatures. These datasuggest a similar cooling evolution of the Ceuta and Cabo Negro units.Ages obtained with all these methods are comprised in the same interval,between 22 and 18 Ma. These data record an almost instantaneouscooling (between 50 and 200°C/Ma) associated to final exhumation afterthe Oligo-Miocene thermal event affecting these units at shallowdepths (10 km). Low-temperature data suggest that Ceuta and CaboNegro units cooled at surface temperatures before Beni Bousera ones.Since the end of Burdigalian, the Rif internal zones vertical movementsdid not exceed 1km, even during the Messinian Salinity. AFT and AHeages in the whole Sebtides are also slightly older than these obtainedin their Spanish equivalent (Alpujarrides). The Gibraltar arc is dividedinto several independent crustal blocks separated by major fault zonesperpendicular to the coast that could have induced independent verticalmovements during the entire Neogene
24 ème Réunion des sciences de la Terre 2014
Pau, France

insu-01080768
https://hal-insu.archives-ouvertes.fr/insu-01080768

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Diamond-bearing UHP metamorphic rocks witness for subduction of lithospheric slabs into the mantle and their return to shallow levels. In this study we present U–Pb and trace elements analyses of zircon and rutile inclusions from a diamond-bearing garnet megacryst collected in a mélange unit exposed on the northern margin of Africa (Edough Massif, NE Algeria). Large rutile crystals (up to 300 μm in size) analyzed in situ provide a U–Pb age of interpreted as dating the prograde to peak subduction stage of the mafic protolith. Trace element analyses of minute zircons (≤30 μm) indicate that they formed in equilibrium with the garnet megacryst at a temperature of 740–810 °C, most likely during HP retrograde metamorphism. U–Pb analyses provide a significantly younger age of attributed to exhumation of the UHP units. This study allows bracketing the age of UHP metamorphism in the Western Mediterranean Orogen to the Oligocene/early Miocene, thus unambiguously relating UHP metamorphism to the Alpine history. Exhumation of these UHP units is coeval with the counterclockwise rotation of the Corsica–Sardinia block and most likely resulted from subduction rollback that was driven by slab pull.
ISSN: 0012-821X

hal-01622789
https://hal.archives-ouvertes.fr/hal-01622789
DOI : 10.1016/j.epsl.2017.06.043

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
ISSN: 0264-3707

hal-00680683
https://hal-brgm.archives-ouvertes.fr/hal-00680683
DOI : 10.1016/j.jog.2011.11.010

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Seismic anisotropy of the south Iberian upper mantle is investigated using shear-wave splitting of SKS phases. We analyzed teleseismic events recorded by sixteen permanent broadband stations installed on the southern Iberian Peninsula and in northern Africa, and we determined fast polarization directions phi, and delay times delta t between fast and slow components. The area of investigation extends across two important geological structures in the Variscan Iberian Peninsula: the Variscan Iberian Massif in its center, and the Gibraltar arc in the Southeast, that represents the most westerly Alpine belt in the western Mediterranean. Shear-wave splitting measurements from stations in the Betic domain show homogeneous ENE-WSW fast directions nearly parallel to the trend of the mountain belt, and smooth spatial variations. Stations in the North, toward the southern part of the Variscan Iberian Massif show homogeneous fast directions however trending NS to NE-SW, different from those recorded in the Betic. These observations may reflect a post-Hercynian (Variscan) deformation of the Ossa-Morena zone, related to the main stages in the tectonic evolution of this part, namely transpressional stage, transtensional stage and shortening episode, or a deformation related to the posterior Alpine orogeny. Along the Gibraltar arc, we observe a smoothly varying phi trend changing from ENE-WSW in the Eastern Betics to NS in the area of Gibraltar and Ceuta, following more or less the general trend of the mountain belt around the Alboran Sea, and the coastline. Since a similar rotation is also visible in results from Pn anisotropy, this suggests that the anisotropy is vertically coherent starting from just below the Moho. Comparing the anisotropy pattern expected from various geodynamic models with the observed SKS splitting suggests that the anisotropy is best explained by a model of slab rollback, rather than by delamination models.
ISSN: 0012-821X

hal-00412175
https://hal.archives-ouvertes.fr/hal-00412175
https://hal.archives-ouvertes.fr/hal-00412175/document
https://hal.archives-ouvertes.fr/hal-00412175/file/Buontempo_SKS_gibraltar_EPSL2008_hal.pdf
DOI : 10.1016/j.epsl.2008.06.024

Éditeur(s) : HAL CCSD American Geophysical Union (AGU)
Résumé : Tectonics, v. 27, p. TC5011, 2008. http://dx.doi.org/10.1029/2007TC002232
International audience
The seismic activity of the Ligurian Basin, the northeastern termination of the western Mediterranean basin, is larger than in surrounding regions, even though recent geodetic studies attest that this area is subject to very low levels of deformation. This basin is an example of a type of passive margins that cannot be considered solely as inert sites of sedimentation and of progressive subsidence and that are reactivated in a compressive pattern; other examples include the Kwanza basin (Angola) and the Brazil margin. We investigated, by means of 2-D thermomechanical modeling, the structural and rheological heterogeneities that can lead to concentration of strain in this marginal basin. We deduced that the deformation of the basin is due to its particular geometric features, narrow and with a thick surrounding continental crust, related to its position at the southern termination of the Alps. This sharp transition, in terms of both geometry and rheological contrast, is a main factor in explaining the weakness of the margin. We discuss the importance of buoyancy forces versus tectonic forces, as well as thermal effects, on the observed reactivation. Influence of contrast in rheology between an oceanic-type crust and continental crust is also studied. Geodynamical implications are proposed for the region. The good agreement between the predicted localized deformation and the observed seismicity distribution should help improve seismic hazard assessment in the region.
ISSN: 0278-7407

hal-00407859
https://hal.archives-ouvertes.fr/hal-00407859
DOI : 10.1029/2007TC002232

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Recent geochemical work shows that subduction-zone serpentinites are repositories for fluid-mobile elements absorbed during interaction with sediment-derived fluids. Unraveling the geochemical fingerprint of these rocks helps to define timing of tectonic accretion of sediments along the subduction interface and the role of serpentinite in element recycling to volcanic arcs. Here we present the trace element and isotopic composition (B–O–H, Sr, Pb) of high-pressure serpentinites from the Voltri Massif (Ligurian Western Alps, Italy), to discuss their role as incompatible element carriers and their contribution to recycling of sediment-derived components in subduction zones.The serpentinites presented here record metamorphic olivine growth during eclogite-facies metamorphism and show undeformed and mylonitic textures. Field relations show that undeformed rocks are enclosed in deformed ones and that no metasedimentary rocks are present nearby. Undeformed serpentinite has very high δ11BSRM951 (from +26‰ to +30‰), low Sr and Pb isotope ratios (87Sr/86Sr = 0.7053–0.7069; 206Pb/204Pb = 18.131–18.205) and low As and Sb contents (0.1 and 0.01 μg/g, respectively). Oxygen and hydrogen isotope compositions are +4.5‰ and −67‰, respectively. In contrast, mylonitic serpentinite shows lower δ11B (from +22‰ to +17‰), significant enrichment in radiogenic Sr and Pb isotopes (87Sr/86Sr up to 0.7105; 206Pb/204Pb up to 18.725), and enrichment in As and Sb (1.3 and 0.39 μg/g, respectively). δ18O of the mylonitic serpentinites reaches values of +5.9‰, whereas δD is comparable with that of undeformed rocks (approximately −70‰). In mylonitic serpentinites, the B and Sr isotopic values and the fluid-mobile element (FME) concentrations are near those for the Voltri metasedimentary rocks (calc- and mica-schists). Pb systematics also reveal influx of a crust-derived component.Our dataset shows that undeformed serpentinite still preserves an oceanic geochemical fingerprint, whereas mylonitic serpentinite is reset in its concentrations of FME and its B, Sr and Pb isotope compositions, due to interaction with sediment- and crust-derived fluids. The environment of this interaction is either compatible with (i) an outer-rise zone setting, with percolation of seawater-derived fluids enriched in sedimentary components into bending-related fault structures, or with (ii) subduction channel domains, where ascending sediment-derived slab fluids infiltrate slices of former oceanic serpentinite accreted to the plate interface domain. Influx of sediment-derived subduction fluids along major deformation zones in serpentinite modifies the element budget of the rocks, with important implications for element recycling and the tectonic history of serpentinite. The B, Sr and Pb isotopic systematics, coupled with FME concentration in serpentinites are particularly helpful geochemical tracers of interaction between different reservoirs in subduction-interface environments, and are more sensitive than the traditionally applied stable oxygen and hydrogen isotope compositions.
ISSN: 0016-7037

hal-01419940
https://hal.archives-ouvertes.fr/hal-01419940
DOI : 10.1016/j.gca.2016.06.034