Éditeur(s) : Pergamon-elsevier Science Ltd
Résumé : The EUNIS (European Union Nature Information System) habitat classification system aims to provide a common European reference set of habitat types within a hierarchical classification, and to cover all terrestrial, freshwater and marine habitats of Europe. The classification facilitates reporting of habitat data in a comparable manner, for use in nature conservation (e.g. inventories, monitoring and assessments), habitat mapping and environmental management. For the marine environment the importance of a univocal habitat classification system is confirmed by the fact that many European initiatives, aimed at marine mapping, assessment and reporting, are increasingly using EUNIS habitat categories and respective codes. For this reason substantial efforts have been made to include information on marine benthic habitats from different regions, aiming to provide a comprehensive geographical coverage of European seas. However, there still remain many concerns on its applicability as only a small fraction of Europe's seas are fully mapped and increasing knowledge and application raise further issues to be resolved. This paper presents an overview of the main discussion and conclusions of a workshop, organised by the MeshAtlantic project, focusing upon the experience in using the EUNIS habitats classification across different countries and seas, together with case studies. The aims of the meeting were to: (i) bring together scientists with exper_ience_in the use of the EUNIS marine classification and representatives from the European Environment Agency (EEA); (ii) agree on enhancements to EUNIS that ensure an improved representation of the European marine habitats; and (iii) establish practices that make marine habitat maps produced by scientists more consistent with the needs of managers and decision-makers. During the workshop challenges for the future development of EUNIS were identified, which have been classified into five categories: (1) structure and hierarchy; (2) biology; (3) terminology; (4) mapping; and (5) future development. The workshop ended with a declaration from the attendees, with recommendations to the EEA and European Topic Centre on Biological Diversity, to take into account the outputs of the workshop, which identify weaknesses in the current classification and include proposals for its modification, and to devise a process to further develop the marine component of the EUNIS habitat classification. (C) 2012 Elsevier Ltd. All rights reserved.
Marine Pollution Bulletin (0025-326X) (Pergamon-elsevier Science Ltd), 2012-12 , Vol. 64 , N. 12 , P. 2630-2638

Droits : 2012 Elsevier Ltd. All rights reserved.
http://archimer.ifremer.fr/doc/00125/23663/22686.pdf
DOI:10.1016/j.marpolbul.2012.10.010
http://archimer.ifremer.fr/doc/00125/23663/

Résumé : Ifremer launched and coordinated the development of a strategy for the REBENT network (REseau BENThique) in 2000 to monitor the aftermath of the "Erika" oil spill in December 1999. Its aim is to provide consistent baseline knowledge about coastal benthic habitats and constitute a monitoring tool to detect changes at various scales over time and space. Sector-based seabed habitat mapping in shallow water (< 50 m deep), is currently being conducted throughout Brittany's coastal waters through a combination of geoacoustic marine systems and ground-truthing using biological grab sampling and seabed observations. Sedimentological and biological results on Glenan area emphasize a great diversity of subtidal habitats and marine species recognized. Sidescan imagery accentuates the complexity of the communities structure in a marine environment distinguished by strong and regulary roughness of the sea. Maerl biocenose is present at the nord-east of the archipelago. Progressively it gives way to mud sediment colonized by Amphiura filiformis and Haploops in the deeper channel. To the west and the south, substratum types are more coarse, occasionally mobiles, composed of essentially sand community with Nephtys and gravelly sand community with Branchiostoma lanceolatum.
Le Rebent (Réseau benthique), initié en 2000 à la suite de la catastrophe de l'Erika, a pour objectif de suivre les habitats benthiques côtiers et de détecter les changements à différentes échelles de temps et d'espace. L'approche sectorielle dans les petits fonds (< 50 m) des côtes bretonnes combine, des moyens de prospection acoustique, afin de délimiter les principaux types de substrats, avec des prélèvements et des observations biologiques pour caractériser les peuplements macrobenthiques. Les résultats des analyses sédimentologiques et faunistiques montrent autour de l'archipel des Glénan, une grande diversité d'habitats et d'espèces reconnues. L'imagerie acoustique fait ressortir la complexité de leur structuration dans un environnement marin soumis à de fortes et régulières périodes d'agitation. La biocénose de maërl occupe le nord-est de l'archipel. Elle laisse place progressivement aux sédiments envasés à Amphiura filiformis et aux vases à Haploops dans le fond du chenal. A l'ouest et au sud, les subtrats sont plus grossiers, essentiellement sableux à Nephtys et sablo-graveleux à Branchiostoma lanceolatum, épisodiquement mobiles.

Droits : info:eu-repo/semantics/openAccess
http://archimer.ifremer.fr/doc/2006/rapport-2301.pdf
http://archimer.ifremer.fr/doc/2006/sup-2301.pdf
http://archimer.ifremer.fr/doc/00000/2301/

Éditeur(s) : HAL CCSD Oxford University Press (OUP)
Résumé : International audience
We present new archaeointensity results from three Italian kilns situated at Ascoli Satriano, Vagnari and Fontanetto Po obtained with the Thellier modified by Coe double heating method. These data complement the directional results previously published. All sites are dated on the basis of archaeological information and/or thermoluminescence dating. The results are corrected for the anisotropy of the thermoremanent magnetization and the cooling rate effects. The new data are compared with previously published archaeointensity data from Italy and nearby countries within 900 km radius from Viterbo. An initial data set including archaeointesity data mainly coming from Italy, France, Switzerland, Czech Republic, Slovakia, Hungary, Greece and Bulgaria has been compiled. After the application of strict selection criteria, the most reliable data have been used for the calculation of a preliminary Italian intensity secular variation (SV) curve for the last 3000 yr. The new curve covers the 300 BC-400 AD and 1200-1900 AD periods. It is established by means of sliding windows of 200 yr shifted by 100 yr. The lack of reliable data for the 1000-200 BC and 400-1200 AD time intervals does not permit the calculation of a continuous curve. Clearly, more high-quality archaeointensity data from Italy and Europe are still needed to draw a robust intensity SV curve for the Italian Peninsula that could be used for archaeomagnetic dating in combination with the directional data.
ISSN: 0956-540X

hal-00828691
https://hal.archives-ouvertes.fr/hal-00828691
DOI : 10.1093/gji/ggs120

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The complex electrical impedance of a garnet-biotite-sillimanite residual enclave in the Neogene dacite of El Hoyazo (SE Spain) has been determined up to 978 °C at 200-300 MPa. This well studied material represents a direct sampling of the Alborán Domain thinned lower crust undergoing partial melting. The paragenesis is garnet + biotite + sillimanite + plagioclase + graphite ± cordierite coexisting with widespread (~ 10 wt.%) rhyolitic melt occurring as inclusions and interstitial glass and developed during regional anatexis at 850 ± 50 °C and 500-700 MPa. The samples were used in cyclic measurements consisting in heating-cooling ramps at progressively higher maximum temperature to observe the effect of reactions on conductivity. In the first cycle up to 850 °C at 2-3 kbar, re-melting of the interstitial glass is achieved with no additional reactions and logarithmic conductivity (S/m) is up to − 1.5. At T > 950 °C new melt with orthopyroxene + ilmenite is produced from biotite partial breakdown and the logarithmic conductivity (S/m) is up to − 0.7. Application of mixing models as Hashin-Shtrikman bounds or Archie's Law, shows that once interconnected, melt controls the electrical conductivity of the enclave. The electrical conductivity of the rock can be simulated with the electrical conductivity data obtained on the starting Matrix glass of the enclave and with the new melt. Our experimental results obtained on a graphitic metasedimentary material evidence show that graphite does not contribute to the conductivity enhancement and that the electrical anomaly observed below the Betics can be explained as effect of partial melting of a residual crust. Comparison with previous works on mafic granulites shows that similar conductivity values can be achieved both by melting of a residual felsic crust or by melting of mafic materials and suggests that pelitic rocks can be more common at deep levels than expected.
ISSN: 0040-1951

hal-00823063
https://hal.archives-ouvertes.fr/hal-00823063
DOI : 10.1016/j.tecto.2012.11.003

Éditeur(s) : HAL CCSD Wiley
Résumé : International audience
1. The Before-After Control-Impact Paired Series (BACIPS) design distinguishes natural spatial and temporalvariability from variation induced by an environmental impact (or intervention) of interest. BACIPS is a powerfultool to derive inferences about interventions when classic experimental approaches (e.g. which rely on spatialreplicates and random assignment of treatments) are not feasible or desirable. Previously applied BACIPSdesigns generally assume that effects are sudden, constant and long-lived: that is, that systems exhibit ‘stepchanges’in response to interventions. However, complex ecological interactions or gradual interventions maycreate delayed and/or progressive responses, potentially impeding the reliability of classic (step-change) analyses.2. We propose a novel approach, the Progressive-Change BACIPS, which generalizes and expands the scope ofBACIPS analyses.We evaluate the relative performance of this approach using both simulated and real data thatexhibit step-change, linear, asymptotic and sigmoid responses following an intervention.We quantify the statisticalpower and accuracy of the Progressive-Change BACIPS under varying initial population densities, intensityof spatial sampling, effect sizes and number of sampling dates After the intervention.3. We show that Progressive-Change BACIPS identified the correct model among the set of candidate modelsunder most conditions and led to accurate estimates of the parameters that were used to generate the simulateddata. When data were sparse, and the dynamics complex, simpler (more parsimonious) models were favouredover the more complex models that actually generated the simulated data. Application of the Progressive-Change BACIPS to existing data sets from the literature led to strong support for specific models (over alternatives)and led to more specific inferences than possible under the classic BACIPS approach.4. The Progressive-Change BACIPS proposed here is more flexible than the original BACIPS formulationbecause the data are used to inform the form of the final model, rather than having the form of the modelimposed on the data. This leads to better estimates of the effects of environmental impacts and the time-scalesover which they operate. As a result, the Progressive-Change BACIPS should be applicable to a wide range ofstudies and should help improve investigation of time-dependent effects. R code to perform Progressive-ChangeBACIPS analysis is provided.
ISSN: 2041-210X

hal-01416668
https://hal-univ-perp.archives-ouvertes.fr/hal-01416668
DOI : 10.1111/2041-210X.12655

Éditeur(s) : Université de Bretagne Occidentale
Résumé : The objective of the present work is to study the formation of the passive continental margins of the Central Segment of the South Atlantic, most particularly the Congo and Angola margins. We propose a combined approach, which integrates structural constraints based on geological cross-sections (based on seismic data) and global constraints based on plate kinematic reconstructions. The structural study is based on : i) MCS and refraction data collected during the ZaiAngo programme (a joint project conducted by Ifremer and Total) ; ii) proprietary, industrial seismic data (courtesy of Total) from the Angola margin and iii) on all available seismic lines from the Africa and Brazil conjugated margins, between Walvis Ridge and the Equatorial Fracture Zones. Based on theses data, three structural domains (continental, transitional and oceanic) have been defined, the major characteristics of which are : Crustal thinning occurs abruptly, mostly below the continental slope, over a lateral distance of less than 50 km. The top of the crust deepens as the Moho shallows. Only a few extensional structures are observed ; tilted blocks are very few (one or two, depending on the profile), found only on the upper part of the slope and sealed by a discordance prior to salt deposition. The transitional domain is characterized by the existence of a pre-salt basin lying over a thin crustal layer. No tilted blocks are observed in this domain and reflectors within the pre-salt sediment series are parallel to the base of the Aptian salt, over distances greater than 100 km, precluding the possibility of any significant deformation that would imply large horizontal motions. Two types of crust are observed in the transitional domain. "Type I" crust is found below the undeformed pre-salt sediment series located below the eastern part of the basin ; it is characterized by an upper layer of thickness greater than 5 km and a abnormal velocity layer (7.2 - 7.6 km/s), up to 6 km thick. "Type II" crust is less than 5 km thick and found below the salt compressive front that affects the western part of the basin. The salt cover is continuous (no erosion surface is observed), from the continental shelf to the western termination of the basin. Salt was not deposited in a confined environment (like in the Mediterranean), but in a shallow water, lagunal environment. This imposes the zero-level and constrains the paleo-bathymetry at the time of salt deposition, which dates the latest stage of margin formation. Understanding the formation of a margin cannot be approached without studying the homolog margin. Therefore, it is of major importance to reconstruct the closure of the ocean bordered by these homolog margins and take into account the constraints imposed by the kinematic reconstructions on the lateral motions of the lithospheric plates. In order to assess the relative position of the plates at the ocean closure (prior to crustal thinning), a global study was thus performed, integrating all geophysical and geological constraints, in the ocean and on land. The role of african intra-plate deformation and its limits and their consequences have been thoroughly studied. To juxtapose the margins of the central segment of the Southern Atlantic, it is all the margins bordering the Equatorial Atlantic that need to be adjuste precisely. The kinematic study of this last region shows that the reconstruction obtained are reliable, unambiguous with a quantifiable precision The best fitting poles (obtained using the PLACA software), show that it is impossible to close the margins beyond the superposition of the salt fronts, from the Angola and Brazil margins. The geological cross-sections based on seismic data from the homolog margins indicate that a 330 km wide basin with thin (< 12 km) crust was present at the time of the fit. This basin cannot result from horizontal movement related to pure stretching or simple shear, or any model implying conservative volume. This conclusion is consistent with the existence of presalt reflectors parallel to the salt layer wich extends to the platform: the formation of the pre-salt basin must be related to vertical motions. The scenario that we propose for the evolution of the Congo-Angola margin consist in four stages: the first phase corresponds to extensional deformation limited to the few tilted blocks observed on the upper part of the slope. During the second phase, the main crustal thinning occurs, vertical motions prevailes, resulting in the formation of the continental slope and in the subsidence of the basin. The third phase corresponds to the first stress striction: deformation is concentrated in a limited section of the basin, which corresponds to the salt compression front. A proto-oceanic crust is formed, probably composed of thinned continental crust intruded by mantle material. The second stress striction corresponds to the finale phase, resulting in oceanisation senso stricto. The evolution described shows that we can not apply conservative models for margin formation (such as McKenzie and Wernicke or any of their avatars). In order to explain this thinning, one should investigate non-conservative models (implying geochemical transformation, small scale convection, intrusion...) such as those proposed in marginal or continental basins with no horizontal movments.
Ce travail de thèse aborde la formation des marges continentales passives dans le segment central de l'océan Atlantique Sud (plus particulièrement au Congo et en Angola), en intégrant une étude en coupe (étude structurale à partir des coupes sismiques) et une étude en plan (étude cinématique). L'étude structurale de la marge a été réalisée à partir des données de sismique réflexion et réfraction de la campagne Zaïango et d'une compilation de données sismiques réflexion existantes sur toutes les marges africaine et brésilienne entre les zones de fracture équatoriales et la ride de Walvis. L'interprétation de ces données a permis d'individualiser la structure de la marge en trois domaines : continental, transitionnel et océanique et de déterminer quelques points majeurs sur la structuration de la marge. L'amincissement est abrupt, localisé dans la zone de pente continentale et restreint à 50 km. La marge montre peu de structures distensives : seuls un ou deux blocs basculés sont observés en haut de pente continentale. Le domaine transitionnel est caractérisé par la géométrie particulière de la sédimentation anté-salifère, l'absence de blocs basculés et la faible épaisseur de croûte. La couche sédimentaire anté-salifère montre des réflecteurs plans jusqu'à la base du sel, continus sur 100 km, éliminant toutes possibilités de déformation du socle pendant et après son dépôt. La croûte du domaine transitionnel peut-être divisée en deux types : une croûte de type I sur laquelle se déposent les sédiments non déformés, et une croûte de type II sur laquelle se superposent les limites du « front compressif salifère » bien exprimé dans les séries postsalifères. Enfin le sel, que l'on observe depuis la plate-forme jusqu'au bassin profond, ne se dépose pas dans un bassin confiné (comme en Méditerranée) mais à un niveau proche de 0 m (ressemblant probablement à un dépôt de type lagunaire) et donne la paléo-bathymétrie au moment de son dépôt qui marque la fin de la période de formation de la marge. La compréhension de la genèse d'une marge ne peut être approchée sans son homologue. Cette simple constatation, cette évidence, montre toute l'importance que l'on doit apporter à la reconstruction cinématique initiale de l'océan qui borde ces marges homologues et aux contraintes imposées par les reconstructions cinématiques sur les mouvements horizontaux des plaques lithosphériques. Afin d'étudier la position des marges au moment de cette fermeture, c'est-à-dire avant amincissement, une étude globale intégrant l'ensemble des données disponibles, géophysiques et géologiques, océaniques et continentales, a été réalisée. Le rôle de la déformation intraplaque africaine, ses limites et leurs conséquences a, en particulier, été l'objet d'une attention poussée. Pour juxtaposer les marges du segment central, ce sont toutes les marges de l'océan Atlantique Equatorial qui doivent être ajustées précisément. L'étude cinématique réalisée de la région équatoriale montre que l'on obtient une reconstruction fiable et sans ambiguïté, avec une précision que l'on peut quantifier. Les pôles issus de cette étude (et calculés avec le Logiciel PLACA) indiquent qu'il est impossible d'obtenir une fermeture plus serrée que celle qui conduit à la superposition des fronts salifères brésilien et angolais : les coupes issues de la sismique réflexion des deux marges indiquent qu'il subsiste un bassin aminci, large de plus de 330 km et dont la croûte n'excède jamais 13 kilomètres d'épaisseur. La formation de ce bassin ne peut résulter de mouvements horizontaux, ce qui exclut un amincissement par étirement (pure stretching) ou par l'existence d'une faille de détachement (simple shear) ou par quelque modèle conservatif que ce soit. Cette constatation corrobore l'observation de la présence d'horizons anté-salifère parallèles, entre eux et au sel, couche salifère que l'on retrouve sur la plate-forme : la création de ce bassin anté-salifère ne peut être que liée à un mouvement vertical. Le schéma d'évolution que nous proposons à partir des données structurales et des contraintes cinématiques présente quatre étapes : le premier stade correspond à une phase de déformation distensive limitée aux quelques rares blocs basculés observés en haut de pente continentale. C'est durant la deuxième étape que se déroule la phase d'amincissement principal, les mouvements verticaux prévalent, aboutissant à la formation de la pente continentale et à la subsidence du bassin. La troisième phase correspond à une première striction des contraintes : la déformation se concentre sur une partie réduite du bassin, coïncidant avec le front salifère compressif. Une proto-croûte océanique se forme, probablement composée de croûte continentale amincie et intrudée de matériel mantellique. La seconde striction correspond à la phase finale de formation de la marge et aboutit à l'océanisation sensu stricto. L'étude cinématique et la description de l'évolution de la marge à partir des données sismiques montre donc que l'on ne peut envisager l'application d'un modèle de genèse des marges avec conservation de volume (type McKenzie ou Wernicke et leurs avatars) : pour expliquer l'amincissement du bassin, il faudrait probablement nous intéresser aux modèles non-conservatifs (impliquant transformation, convection à petite échelle, ...) qui sont déjà invoqués pour la formation des bassins marginaux ou continentaux, sans mouvements horizontaux.

Droits : info:eu-repo/semantics/openAccess
http://archimer.ifremer.fr/doc/2003/these-82.pdf
http://archimer.ifremer.fr/doc/00000/82/

Éditeur(s) : Université des Antilles Études caribéennes
Résumé : L’Union européenne opère actuellement la seconde révision de sa politique de la pêche depuis la création de celle-ci, en 1970. Instituée pour développer la pêche maritime et garantir un revenu aux pêcheurs, la politique commune de la pêche (PCP) s’est orientée progressivement vers la protection des espèces et de l’environnement marin. Pour cela, elle a sacrifié une part importante du secteur productif, mais a échoué et, avec le déclin de la pêche en Europe, les régions ultrapériphériques de la Caraïbe (RUP-C) ont gagné en importance relative dans ce domaine. Elles représentent aujourd’hui près de 30 % de la flotte nationale et les fondements malthusiens de la PCP ne sont plus adaptés à leurs caractéristiques : ressources halieutiques, développement économique, emplois, sécurité des approvisionnements alimentaires, etc. La réforme actuellement en cours, qui devrait aboutir avant 2012, offre peut-être une alternative aux RUP-C permettant la mise en œuvre des mesures spécifiques en application de l’article 349 du Traité sur le Fonctionnement de l’Union européenne.
The European Union currently operates the second reform of its Common Fisheries Policy since its creation in 1970. Established to develop the fisheries and provide incomes for fishermen, the Common Fisheries Policy (CFP) was directed gradually towards the protection of the species and the marine environment. To do this, it sacrificed a large part of the productive sector, but failed, and with the decline of fisheries in Europe, the outermost regions of the Caribbean gained relative importance in this field. They now account for nearly 30% of the national fleet and the Malthusians bases of the CFP are not suited any more to their characteristics: fisheries resources, economic development, jobs, security of food supply, etc. The ongoing reform, which should be in force before 2012, may offer an alternative to the outermost regions of the Caribbean for the implementation of specific measures under Article 349 of the Treaty on the Functioning of the European Union.
Caraïbes
Europe

Droits : info:eu-repo/semantics/openAccess
urn:doi:10.4000/etudescaribeennes.4356
http://journals.openedition.org/etudescaribeennes/4356

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Dudley et al. [9] commented on our paper [11], arguing that the current IUCN objective-based categorization ofprotected areas, which is also used in marine protected areas (MPAs), should not be abandoned and replaced bythe new regulation-based classification system [11]. Here we clarify that we do not advocate replacing thecurrent IUCN categories, but highlight the benefits of using both the objective-based IUCN categories and thenew regulation-based classification when applied to MPAs. With an increasing number of MPA types beingimplemented, most of them multiple-use areas zoned for various purposes, assessing ecological and socioeconomicbenefits is key for advancing conservation targets and policy objectives. Although the IUCN categoriescan be used both in terrestrial and marine systems, they were not designed to follow a gradient of impacts andthere is often a mismatch between stated objectives and implemented regulations. The new regulation-basedclassification system addresses these problems by linking impacts of activities in marine systems with MPA andzone classes in a simple and globally applicable way. Applying both the IUCN categories and the regulationbasedclasses will increase transparency when assessing marine conservation goals.
ISSN: 0308-597X

hal-01469541
https://hal-univ-perp.archives-ouvertes.fr/hal-01469541
DOI : 10.1016/j.marpol.2016.11.025

Résumé : Les fourmis sont des organismes cibles appropriés pour les études environnementales. Au cours de notre étude, nous nous sommes focalisés sur les fourmis de la litière via l'application de deux méthodes de récolte complémentaires selon le protocole all (ants of leaf litter). Dans les forêts naturelles de Guyane française, l'hétérogénéité environnementale et les perturbations structurent les communautés de fourmis de la litière en influençant la richesse, la diversité, l'abondance et la densité en espèces ainsi que les compositions taxonomique et fonctionnelle. Chaque type de formation végétale possède une communauté spécifique. La fragmentation et la conversion des forêts en plantations ont entrainé une altération plus ou moins profonde des communautés; cette variabilité est fonction du type d’agriculture et des espèces d'essences cultivées. Bien que l'altération des communautés se soit révélée maximale dans la plupart des monocultures, les plantations de cacaoyers ont un potentiel de conservation réel. Enfin, dans un contexte ou il est urgent de simplifier l'intégration des arthropodes dans les études de conservation, de contrôle et de suivi de la santé des écosystèmes terrestres, la méthode des réseaux de neurones est apparue comme un outil puissant pour mettre en évidence et analyser les patrons des communautés de fourmis.
Ants are reliable and relevant target organisms for environmental surveys. In our study, we focused on litter-dwelling ants through the use of two complementary sampling methods that were implemented according to the ants of leaf litter (all) protocol. In pristine forests of french guiana, leaf-litter ant communities are structured by environmental heterogeneity and natural perturbations - which influence species richness, diversity, abundance and density, as well as taxonomic and functional composition. This results in habitat-specific communities for each vegetal formation. Forest fragmentation and conversion into monocultures have led to a more or less deep alteration of the ant communities; this variability depends on the type of agricultural system and cultivated tree species. Although the intensity of community alteration peaked in tree monocultures, cocoa plantation exhibited a real potential for native species conservation. Finally, in the current context where simplifying the integration of arthropods into conservation programs as well as into surveys designed to monitor and manage the environment is critical, the use of neural networks appears to be a powerful tool for reliably highlighting and analyzing ant communities patterns.

http://www.theses.fr/2011AGUY0475/document

Éditeur(s) : Elsevier
Résumé : The gametogenic cycle and the reproductive effort of the blacklip pearl oyster, Pinctada margaritifera, cultivated in Takapoto lagoon were studied for a 1-year period (March 1997-April 1998) by bimonthly observations of gonadal sections, dry tissue weights and gonadal index in a population of pearl oyster composed of three age-groups. pearl oysters attained sexual maturity in the end of their first year (height approximate to 40 mm), implying that P. margaritifera is a late-maturing species in comparison with other Pteriidae. This species was also confirmed to be a marked protandrous successive hermaphrodite in culture, with 100 % of males at first maturity and 75 % in older pearl oyster (height > 120 mm). The general pattern of gametogenic activity, fairly synchronous in both sexes, was comparable with that of other tropical bivalves: reproduction occurs continuously throughout the year with a maximal activity during the warm season (November-May). No resting period was observed. Quantitative growth data showed that P. margaritifera exhibits an annual synchronised polymodal spawning pattern, with two spawning peaks in age-group I (height approximate to 70 mm) and five in age-groups II (height approximate to 100 mm) and III (height approximate to 120 mm). Spawning was sometimes incomplete, nevertheless a clear relationship between gamete production (P-R, g) and size (height H, mm) was obtained: P-R = 5.26 x 10(-7) H-2.91 (R-2 = 0.99, p < 0.05). Estimation of P-R was used to calculate the annual reproductive effort in P. margaritifera. Reproductive effort (%) was similar to those calculated for temperate species and showed a progressive increase with the age of pearl oyster, from 7 % in age-group I to 38 % in age-group III. This study showed that, in a fairly stable tropical environment such as the Takapoto lagoon, P. margaritifera is a multiple spawner, which uses an opportunistic reproductive strategy, allowing investment all year around, of any surplus energy into gamete production. Surplus energy is ensured by the high pumping rates developed by this non-symbiotic bivalve to succeed in low seston conditions. (C) 2000 Ifremer/Cnrs/Inra/Ird/Cemagref/Editions scientifiques et medicales Elsevier SAS.
Le cycle et l'effort de reproduction de l'huître perlière à lèvres noires, Pinctada margaritifera, cultivée dans le lagon de Takapoto, ont été étudiés sur une période annuelle (de mars 1997 à avril 1998), par un suivi bimensuel des stades de maturation et des indices gonadiques, sur une population en élevage composée de trois groupes d'âge (1, 2 et 3 ans). Cette étude a confirmé que P. margaritifera est une espèce qui se reproduit tardivement par rapport aux autres Ptériidés (elle atteint sa maturité sexuelle à la fin de sa première année, pour une hauteur approximative de 40 mm). Par ailleurs, elle présente, en élevage, une protandrie marquée (100 % de mâles à première maturité, 75 % pour des huîtres âgées de trois ans). Le schéma général de sa gamétogenèse, relativement synchrone dans les deux sexes, est comparable à celui des autres bivalves tropicaux : la reproduction est quasiment continue (aucune période de repos sexuel) avec une activité accrue en saison chaude (de novembre à mai). L'analyse des variations du poids de la gonade suggère l'existence de deux pics d'émission de gamètes chez les huîtres de un an et cinq pics chez les huîtres de 2 et 3 ans (cycle de reproduction de type polymodal). Bien que ces émissions de gamètes soient parfois incomplètes, une relation entre la production de gamètes (PR, en g) et la taille de l'huître perlière (hauteur, H, en mm) a été établie : PR = 5,26 x 10-7 H2,91 (R2 = 0,99, p < 0,05). Ces résultats ont permis de calculer l'effort de reproduction de P. margaritifera à Takapoto et sur un bilan annuel : il augmente avec l'âge de l'huître perlière de 7 % pour le groupe d'âge I à 38% pour le groupe d'âge III. Ces valeurs annuelles sont similaires à celles calculées chez les bivalves de milieux tempérés. Cette étude a donc montré que, dans un environnement tropical assez stable tel que celui du lagon de Takapoto, P. margaritifera présente une reproduction continue, avec plusieurs pics d'émission de gamètes par an. Cette stratégie « opportuniste » permet l'investissement, de tout surplus d'énergie en production de gamètes, tout au long de l'année. Malgré la faible concentration du milieu en nourriture, ces surplus d'énergie sont assurés par les fortes capacités de filtration développées par cette espèce tropicale non-symbiotique.
Aquatic Living Resources (0990-7440) (Elsevier), 2000 , Vol. 13 , N. 1 , P. 37-48

Droits : 2000 Ifremer/Cnrs/Inra/Ird/Cemagref/Éditions scientifiques et médicales Elsevier SAS
http://archimer.ifremer.fr/doc/2000/publication-1391.pdf
DOI:10.1016/S0990-7440(00)00135-2
http://archimer.ifremer.fr/doc/00000/1391/

Éditeur(s) : HAL CCSD Springer Verlag (Germany) Springer Verlag
Résumé : Direct numerical simulations of flow through two millimeter-scale rock samples of limestone and sandstone are performed using three diverse fluid dynamic simulators. The resulting steady-state velocity fields are compared in terms of the associated empirical probability density functions (PDFs) and key statistics of the velocity fields. The pore space geometry of each sample is imaged at 5.06−μm voxel size resolution using X-ray microtomography. The samples offer contrasting characteristics in terms of total connected porosity (about 0.31 for the limestone and 0.07 for the sandstone) and are typical of several applications in hydrogeology and petroleum engineering. The three-dimensional fluid velocity fields within the explicit pore spaces are simulated using ANSYS® FLUENT® ANSYS Inc. (2009), EULAG Prusa et al. (Comput. Fluids 37, 1193–1207 2008), and SSTOKES Sarkar et al. (2002). These computational approaches are highly disperse in terms of algorithmic complexity, differ in terms of their governing equations, the adopted numerical methodologies, the enforcement of internal no-slip boundary conditions at the fluid-solid interface, and the computational mesh structure. As metrics of comparison to probe in a statistical sense the internal similarities/differences across sample populations of velocities obtained through the computational systems, we consider (i) integral quantities, such as the Darcy flux and (ii) main statistical moments of local velocity distributions including local correlations between velocity fields. Comparison of simulation results indicates that mutually consistent estimates of the state of flow are obtained in the analyzed samples of natural pore spaces despite the considerable differences associated with the three computational approaches. We note that in the higher porosity limestone sample, the structures of the velocity fields obtained using ANSYS FLUENT and EULAG are more alike than either compared against the results obtained using SSTOKES. In the low-porosity sample, the structures of the velocity fields obtained by EULAG and SSTOKES are more similar than either is to the fields obtained using ANSYS FLUENT. With respect to macroscopic quantities, ANSYS FLUENT and SSTOKES provide similar results in terms of the average vertical velocity for both of the complex microscale geometries considered, while EULAG tends to render the largest velocity values. The influence of the pore space structure on fluid velocity field characteristics is also discussed.
ISSN: 1420-0597

hal-01174152
https://hal.archives-ouvertes.fr/hal-01174152
DOI : 10.1007/s10596-015-9486-7

Éditeur(s) : HAL CCSD
Résumé : il s'agit d'un type de produit dont les métadonnées ne correspondent pas aux métadonnées attendues dans les autres types de produit : ACTIVITY_REPORT
Understanding genomic evolution in wild populations is of particular importance because evolution is a central process in our understanding of populations’ history and their future response to global changes. In addition to fundamental knowledge, the study of populations’ evolution has wide applications such as conservation/restoration genetics or epidemiology. Indeed, genetic diversity is the ‘fuel’ for populations’ evolution and adaptation to new conditions, and estimating the extent and the geographic structure of genetic diversity, as well as identifying the evolutionary forces behind (demography, gene flow, and adaptation) are thus major challenges in the current context of global changes. [br/]A particular attention is currently devoted to the process of genetic divergence in wild populations, with emphases on gene flow, local adaptation, and their interactions. Indeed, adaptation in wild populations is supported in many species by many kinds of experiments based on both quantitative phenotypic traits and molecular data. However, the processes governing populations’ evolution are poorly understood in the tropical rainforest of Amazonia, and the relative influence of neutral and adaptive processes are continuously discussed. [br/]I am a young scientist interested in the process of genomic divergence in wild (tree) populations. I aimed at understanding how evolution structures the genetic diversity and governs molecular divergence in wild populations, with particular emphases on gene flow and local adaptation. During five years as a young scientist, I worked on answering the following questions, focusing on two tree species occupying vulnerable areas: mainly [i]Eperua falcata[/i] in Amazonia and, to a lesser extent, [i]Abies alba[/i] in the Mediterranean area.[br/][u]Scientific questions:[/u][br/]- Which evolutionary drivers are responsible of the structure of genetic diversity in wild populations occupying wide areas? This question was addressed at different geographical scales: from large (regional) to very local (microgeographic) scales. [br/]- What is the relative influence of neutral (gene flow, inbreeding) and adaptive drivers in the process of genetic divergence?[br/]- Is microgeographic adaptation possible in spite of extensive gene flow between populations occupying the extreme boundaries of an ecological gradient? [br/]- What is the extent of natural selection in the (whole) genome of wild populations? [br/][br/]My research work is at the interface between three promising disciplines: Evolutionary genomics (i.e. the study of populations evolution and the evolutionary drivers behind), Bioinformatics (i.e. the treatment of next-generation data), and Bayesian modelling (i.e. the empirical calibration of complex mechanistic model). I intend to take advantage of the recent advances in sequencing and informatic technologies to bring up to date the field of ecological genetics and evolutionary biology, by developing modern research strategies to study the process of genomic divergence in wild populations.
https://hal.archives-ouvertes.fr/hal-01204218

hal-01204218
https://hal.archives-ouvertes.fr/hal-01204218
PRODINRA : 286326

Éditeur(s) : Wiley-blackwell
Résumé : 1. Approximately 300 pelagic fish species naturally aggregate around floating objects (FOBs) at the surface of the oceans. Currently, more than 50% of the world catch of tropical tuna comes from the industrial tuna fisheries around drifting FOBs. Greater understanding of the complex decision-making processes leading to this aggregation pattern and the impact of the massive release of artificial FOBs by fishermen on the spatial distribution and management of tuna is needed. 2. We analyse how the interplay between social (relationships between individuals) and non-social (responses to the environment) behaviours may affect the spatial distribution of a population in a multi-FOB environment. Taking the example of tropical tunas associating with FOBs and using differential equations and stochastic simulations, we examine how, when increasing the number of FOBs, fish aggregation dynamics and the distribution of the population among patches are affected by the population size, level of sociality and the natural retentive and/or attractive forces of FOBs on individual tuna. 3. Our model predicts that, depending on the species' level of sociality, fish will be scattered among FOBs or aggregated around a single FOB based on the number of FOBs deployed in a homogeneous oceanic region. 4. For social species, we demonstrated that the total fish catch is reduced with increasing FOBs number. Indeed, for each size of population, there are a number of FOBs minimizing the total population of fish associated with FOBs and another number of FOBs maximizing the total population of associated fish. 5. Synthesis and applications. In terms of fisheries management, the total catch volume is directly linked to the total number of floating objects (FOBs) for non-social species, and any limit on the number of sets would then result in a limit on the total catch. For social species (e.g. tuna), however, increasing the number of FOBs does not necessarily lead to an increase in the total catch, which is a non-intuitive result. Indeed, our model shows that, for specific values of the parameters, deploying a greater number of FOBs in the water (all other parameters being constant) does not necessarily help fishermen to catch more tuna, but does increase the level of fishing effort and bycatch.
Journal Of Applied Ecology (0021-8901) (Wiley-blackwell), 2013-10 , Vol. 50 , N. 5 , P. 1081-1092

Droits : 2013 The Authors. Journal of Applied Ecology, 2013 British Ecological Society
http://archimer.ifremer.fr/doc/00151/26275/24439.pdf
DOI:10.1111/1365-2664.12140
http://archimer.ifremer.fr/doc/00151/26275/

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
Strain and strain rate partitioning in partially molten rocks are two of the important mechanisms that govern the process of coupling and/or decoupling of the partially molten lithosphere. Consequently, the proportion of partial melt and crystals and their network in partially molten rocks influence the degree of the partitioning along with the bulk rheology of the system. This study explores the possible role of finite strain and strain rate on the rate and volume of partial melting and crystallization in a metapelitic system undergoing deformation. Cylinders of synthetic quartz-muscovite aggregate (7: 3 volume ratio) were deformed in torsion at 750 C, 300 MPa and constant shear strain rate ((gamma) over dot = 3 x 10(-4) s(-1)) for finite shear strains (gamma) 1-15. The deformed samples were studied along the longitudinal tangential ( LT) and axial ( LA) sections to obtain the data along a range of strain rates for a given finite strain and vice versa. The results showed that deformation plays an important role on the kinetics of partial melting and crystallization. With increasing strain rate, amount and rate of crystallization comprise the volumetrically dominant process compared to partial melting at a given finite strain. In contrast, when the strain rate is constant, partial melting is the dominant process over crystallization up to moderate strain (gamma < 5). The dominant process reverses at higher strain, and the system shows more crystallization than partial melting. Application of the experimental data to geological systems implies that for metapelites a significant amount (similar to 20%) of partial melt can generate at high strain rate and moderate strain (gamma similar to 7), but at high strain (gamma = 15) the system is melt depleted. Under such conditions, decoupling should take place in brittle-ductile mode. On the other hand, rocks undergoing deformation with low strain rates and strain (gamma < 3) contain more than 25% partial melt, which can act as a major decoupling agent by localizing ductile shear zones.
ISSN: 0148-0227

hal-00617714
https://hal.archives-ouvertes.fr/hal-00617714
DOI : 10.1029/2010JB007865

Éditeur(s) : Elsevier
Résumé : The distribution and speciation of mercury (Hg) in the water column, the inputs (wet deposition and tributaries) and the outputs (atmospheric evasion and outlet) of an artificial partially anoxic tropical lake (Petit-Sa-Lit reservoir, French Guiana) were investigated oil a seasonal basis in order to appraise the cycling and transformations of this metal. The total mercury (HgT) concentrations in the oxygenated epilimnetic waters averaged 5 +/- 3 pmol L-1 in the unfiltered samples (HgTUNF) and 4 +/- 2 pmol L-1 in the dissolved (HgTD) phase (< 0.45 mu m). On average, the monomethylmercury (MMHg) constituted 8%, 40%, and 18% of the HgT in the dissolved phase, tile particulate suspended matter and in tile unfiltered samples, respectively. Covariant elevated concentrations of particulate MMHg and chlorophyll a in the epilimnion suggest that phytoplankton is ail active component for the MMHg transfer in tile lake. In the anoxic hypolimnion the HgTUNF averages 13 +/- 6 pmol L-1 and tile HgTD 8 +/- 4 pmol L-1. The averages of MMHgP and MMHgD in hypolimnetic waters were two and three times the corresponding values of the epilimnion, 170 +/- 90 pmol g(-1) and 0.9 +/- 0.5 pmol L-1, respectively. In the long dry and wet seasons, at the flooded forest and upstream dam sampling stations, the vertical profiles of MMHgD concentrations accounted for two distinct maxima: one just below the oxycline and the other near the benthic interface. Direct wet atmospheric deposition accounted for 14 moles yr(-1) HgTUNF, with 0.7 moles yr(-1) as MMHgUNF, while circa 76 moles yr(-1) of HgTUNF, with 4.7 moles yr(-1) as MMHgUNF, coming from tributaries. Circa 78 moles (similar to 17% as MMHg) are annually exported through tile dam, while 23 moles yr(-1) of Hg-0 evolve in the atmosphere. A mass balance calculation suggests that the endogenic production of MMHgUNF attained 8.1 moles yr(-1), corresponding to a methylation rate of 0.06% d(-1). As a result, tile Petit-Saut reservoir is a large man-made reactor that has extensively altered mercury speciation in favor of methylated species.
Applied Geochemistry (0883-2927) (Elsevier), 2008-05 , Vol. 23 , N. 5 , P. 1101-1126

Droits : 2008 Elsevier Ltd All rights reserved.
http://archimer.ifremer.fr/doc/2008/publication-4198.pdf
DOI:10.1016/j.apgeochem.2007.11.006
http://archimer.ifremer.fr/doc/00000/4198/

Éditeur(s) : Université de Bretagne Occidentale
Résumé : The negative impact of the man on the environment unquestionably increases. The coastal environment as a whole is the maritime environment which is the most exposed to man-made eutrophication. For instance, nitrate loads to coastal waters off Brittany (France) have increased 10 times (from 3 to s 30mg L-1NO3) during the four last decades. Eutrophication of this coastal zone is now a recurrent problem, more and more worrying. This eutrophication exhibits two main forms : " green tides ", which are caused by local proliferations and stranding of green macro-algae (particularly the Ulva species) in nitrogen-enriched areas ; phytoplanktonic blooms, which are responsible for coloured water events, toxic species can be present (Pseudo-Nitzschia, Alexandrium, Dinophysis), and induce banning of shellfish consumption. The objectives of this study are to assess the respective role of various rivers (especially the Loire and the Vilaine) in the eutrophication of the Brittany shelf ecosystem and test the impact of nitrogen enrichment in the triggering of Pseudo-Nitzchia toxicity. For these purposes, a coupled hydrodynamical/ biogeochemical 3D model has been developed and validated against past measured time-series and satellite images. After a brief analysis of primary production over the Brittany shelf under different conditions, we show a description of the real time adaptation of this model. Daily results are currently presented in real time on www.previmer.org web site. The inability of the model to correctly simulate near shore phytoplankton is worsened in this model by the fact that the turbidity field used is a climatological one, made by satellite images averaged on a decadal basis. First, near shore pixels of satellite images are scarcely reliable, secondly a climatological mean cannot represent the sudden bursts or drops of the real turbidity, highly dependent on the actual sea-state : this can explain also why the model at this moment fails to reproduce a sudden bloom occurring in a short period of sunny and calm weather. The simulated Pseudo-Nitzschia biomass and induced risk of toxicity in the water column cannot really be validated offshore, because monitoring measurements are available only near the coast, and deal only with toxicity in benthic filter feeders. To get temporarily rid of that problem, an interesting improvement would be to add to the operational model the bio-accumulation of toxin in the shellfishes : simulated concentrations in shellfish fresh would become directly comparable with usual measurements of the monitoring networks. Our model points out the important impact of Loire river loads on the primary production on the western and southern Brittany. This result is crucial for administrations in charge of reducing the terrestrial loadings responsible for eutrophication, because it can delay reduction programs on small tributaries until the main input from the Loire has been significantly reduced. A question arises, about the reliability of the haline stratification in the model, because the horizontal extent of the Loire plume will be enhanced by a stronger stratification.
L'eutrophisation des milieux marins côtiers, de plus en plus importante, représente un des impacts majeurs des activités humaines sur l'environnement. Les phénomènes d'eutrophisation sont en constante augmentation ; ces dernières décennies ont vu le nombre de sites touchés augmenter de par le monde. La bande côtière bretonne est particulièrement concernée par ce phénomène. L'eutrophisation s'y manifeste de deux façons : "Des phénomènes de marée vertes, très localisées, qui sont provoqués par la croissance excessive et l'échouage de macro-algues du genre Ulva dans ces zones riches en azote ; Des blooms de phytoplancton à l'origine des phénomènes d'eaux colorées, qui peuvent aussi provoquer des interdictions de consommation de coquillages lorsque les espèces mises en jeu sont toxiques (Pseudo-Nitzschia, Alexandrium, Dinophysis). L'objectif de ce travail est multiple : il vise à mettre en évidence et à comprendre l'impact et le rôle des apports en nutriments sur la production primaire et l'eutrophisation des milieux côtiers. Ce travail a aussi pour ambition l'identification et la compréhension des causes des phénomènes d'eutrophisation et permettre ainsi d'apporter des solutions ou des pistes d'amélioration. En n, il a aussi un objectif de prévision à court terme de l'état biologique sur la zone. Pour atteindre ces objectifs, un modèle en temps réel a été mis en oeuvre. Les résultats de simulations numériques et de mesures satellitaires sont présentés sur internet : www.previmer.org. L'outil principal de ce travail est un modèle couplé physique/biogéochimie. La partie hydrodynamique est fournie par le code Mars3D (3D hydrodynamical Model for Application at Regional Scale) développé à IFREMER. Au code hydrodynamique Mars3D est couplé le modèle des cycles de l'azote, du phosphore et du silicium d'IFREMER. Le modèle couplé permet de simuler en 3 dimensions et de manière dynamique les courants, le brassage horizontal et vertical, les champs de température et de salinité, mais aussi les principaux cycles de nutriments, reproduisant ainsi les conditions déterminantes de la production primaire. La croissance des algues est modélisée, et nous permet de voir l'influence des panaches de dilution des principales rivières bretonnes sur leur croissance. Les diffcultés du modèle à correctement simuler les concentrations en phytoplancton près des zones côtières, sont probablement dues à l'utilisation d'une climatologie de concentration en matière en suspension fondée sur des données satellitaires. Tout d'abord, les pixels côtiers des images satellitaires sont entachés d'erreurs, ensuite une climatologie n'est pas capable de représenter les apports soudains des fleuves lors des crues. Cela peut expliquer l'incapacité du modèle a représenter certains blooms liés à des périodes ensoleilées et calmes. A ce modèle de base nous avons ajouté un genre spécifique de phytoplancton : le genre Pseudo-Nitzschia. Certaines espèces de Pseudo-Nitzschia sont réputées toxiques. En effet, ce phytoplancton a la capacité de synthétiser une toxine : l'acide domoïque. Cette toxine est responsable du syndrome ASP (Amnesic Shellfish Poisoning). Le modèle reproduit globalement les mêmes zones de toxicité que les mesures du REPHY, et donne des résultats encourageants. L'étude montre que la Loire influence une large partie de la bande côtière bretonne ; son panache remonte jusqu'au nord de la mer d'Iroise, et contribue pour une grande part à l'enrichissement du sud et de l'ouest de la Bretagne. Le traçage de l'azote en provenance de la Loire au sein des cycles biogéochimiques nous a permis de quantifier cet enrichissement.

Droits : info:eu-repo/semantics/openAccess
http://archimer.ifremer.fr/doc/00015/12603/9481.pdf
http://archimer.ifremer.fr/doc/00015/12603/

Éditeur(s) : HAL CCSD Geological Society of America
Résumé : International audience
We present the results of dynamic modeling of the western Mediterranean that accounts for observed global positioning system (GPS) surface deformation of the Alboran Sea and surrounding Rif and Betic Mountains as the result of the combined effects of relative motion of the Eurasian and Nubian plates, low strength in the Alboran Sea region and sub-lithospheric processes occurring beneath the External Rif domain. Assuming that the lithosphere behaves elastically over the short time period of the GPS observations, an elastic plate model is considered in our study, including an area of weak lithosphere (factor of 10) centered on the Alboran Sea and in which lateral boundary conditions consist of the Nubia-Eurasia oblique convergence. Sub-crustal processes are modeled by application of a horizontal traction on a small area (patch) at the base of the elastic plate. Our modeling studies demonstrate the need for sub-crustal or sub-lithospheric, southwestward-directed forcing to account for observed southwestward motion of the Rif and Betic domains. Based on the location, orientation, and small area of the traction patch, we hypothesize that forcing is associated with delamination and rollback of the subducted African continental lithospheric mantle beneath the External Rif zone, due to the pull of the oceanic part of the Western Mediterranean slab, a dynamic process that may be similar to that where the over-riding plate is driven toward the subduction zone during slab rollback.
ISSN: 0091-7613

hal-00524546
https://hal.archives-ouvertes.fr/hal-00524546
DOI : 10.1130/G30963.1

Éditeur(s) : Université des Antilles Études caribéennes
Résumé : Tourisme alternatif et tourisme de masse présentent des caractéristiques communes. L’application et l’institutionnalisation de la RSE dans le secteur touristique paraissent être une démarche pertinente, notamment dans les destinations à environnement vulnérable comme Haïti. Dès lors, le choix entre tourisme de masse et tourisme alternatif devient moins difficile, puisque le tourisme de masse et le tourisme alternatif ne peuvent coexister dans une même strate. Nous argumentons qu’Haïti a plutôt intérêt à s’orienter vers le tourisme alternatif, car il correspond mieux à la démarche éthique prônée dans la démarche RSE.
Mass tourism and alternative tourism have some common points. Developing and institutionalizing CSR in the tourism industry in countries with vulnerable environment like Haiti is pertinent. And, the choice between mass tourism and alternative tourism becomes less difficult, since the two forms of tourism cannot be associated at the same layer of the economy. We argue that Haiti should head toward an alternative form of tourism because this form of tourism has much in common with CSR approach and its ethic.
Haïti

Droits : info:eu-repo/semantics/openAccess
urn:doi:10.4000/etudescaribeennes.7600
http://journals.openedition.org/etudescaribeennes/7600

Résumé : Industrial potentialities related to biotechnology of microalgae are examined, highlighting a wide spectrum of applications which concern principally nutrition, health, environment and energy. The french situation of research on microalgae, especially at Ifremer, is assessed, showing that the main axis are fine chemistry, aquaculture, environment, bio-process engineering. It covers the majority of the applications, but leaves in shade certain important aspects such as human food and CO2 fixation. Concerning the general approach, some significant improvements can be expected from a more accurate control of bacteriological and genetic quality of cultures. About the industrial aspects, a national initiative seems in progress. The variety of potential applications together with strategic character of some of them (health, food), justify that research in relation with concerned fields be structured, and even intensified, in order to reinforce national position, and give extend to future developments.
Les potentialités industrielles attachées à la biotechnologie des microalgues sont inventoriées, faisant apparaître un large spectre d'applications touchant principalement l'alimentation, la santé, l'environnement et l'énergie. L'état en France, et à l'IFREMER en particulier, de la recherche touchant aux microalgues qui est dressé montre que les axes principaux sont orientés vers la chimie fine, l'aquaculture, l'environnement, le génie des procédés de production. Ceci couvre l'essentiel des applications, mais laisse cependant dans l'ombre certains aspects importants comme l'alimentation humaine, et l'épuration du C02- Sur le plan de la démarche, des progrès sensibles sont à attendre d'un contrôle plus rigoureux de la qualité bactériologique et génétique des cultures. Sur le plan industriel, une initiative nationale semble en cours. La variété des applications potentielles, et le caractère stratégique de certaines (santé, alimentation), justifient que la recherche dans les domaines concernés soit structurée, voire intensifiée, afin de renforcer la position nationale, et de donner de l'ampleur aux développements futurs.

Droits : info:eu-repo/semantics/openAccess
http://archimer.ifremer.fr/doc/1997/rapport-1092.pdf
http://archimer.ifremer.fr/doc/00000/1092/

Éditeur(s) : HAL CCSD Wiley
Résumé : International audience
The deeply branching Deinococcus-Thermus lineage is recognized as one of the most extremophilic phylum of bacteria. In previous studies, the presence of Deinococcus-related bacteria in the hot arid Tunisian desert of Tataouine was demonstrated through combined molecular and culture-based approaches. Similarly , Thermus-related bacteria have been detected in Tunisian geothermal springs. The present work was conducted to explore the molecular diversity within the Deinococcus-Thermus phylum in these extreme environments. A set of specific primers was designed in silico on the basis of 16S rRNA gene sequences, validated for the specific detection of reference strains, and used for the polymerase chain reaction (PCR) amplification of metagenomic DNA retrieved from the Tataouine desert sand and Tunisian hot spring water samples. These analyses have revealed the presence of previously undescribed Deino-coccus-Thermus bacterial sequences within these extreme environments. The primers designed in this study thus represent a powerful tool for the rapid detection of Deinococcus-Thermus in environmental samples and could also be applicable to clarify the biogeography of the Deinococcus-Thermus phylum.
ISSN: 2045-8827

Droits : http://creativecommons.org/licenses/by/
hal-01560945
https://hal-amu.archives-ouvertes.fr/hal-01560945
https://hal-amu.archives-ouvertes.fr/hal-01560945/document
https://hal-amu.archives-ouvertes.fr/hal-01560945/file/Theodorakopoulos-2013.pdf
DOI : 10.1002/mbo3.119