Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
We review the geodynamic evolution of the Aegea-Anatolia region and discuss strain localisation there over geological times. From Late Eocene to Present, crustal deformation in the Aegean backarc has localised progressively during slab retreat. Extension started with the formation of the Rhodope Metamorphic Core Complex (Eocene) and migrated to the Cyclades and the northern Menderes massif (Oligocene and Miocene), accommodated by crustal-scale detachments and a first series of core complexes (MCCs). Extension then localised in Western Turkey, the Corinth Rift and the external Hellenic arc after Messinian times, while the North Anatolian Fault penetrated the Aegean Sea. Through time the direction and style of extension have not changed significantly except in terms of localisation. The contributions of progressive slab retreat and tearing, basal drag, extrusion tectonics and tectonic inheritance are discussed and we favour a model (1) where slab retreat is the main driving engine, (2) successive slab tearing episodes are the main causes of this stepwise strain localisation and (3) the inherited heterogeneity of the crust is a major factor for localising detachments. The continental crust has an inherited strong heterogeneity and crustal-scale contacts such as major thrust planes act as weak zones or as zones of contrast of resistance and viscosity that can localise later deformation. The dynamics of slabs at depth and the asthenospheric flow due to slab retreat also have influence strain localisation in the upper plate. Successive slab ruptures from the Middle Miocene to the Late Miocene have isolated a narrow stripe of lithosphere, still attached to the African lithosphere below Crete. The formation of the North Anatolian Fault is partly a consequence of this evolution. The extrusion of Anatolia and the Aegean extension are partly driven from below (asthenospheric flow) and from above (extrusion of a lid of rigid crust).
ISSN: 0040-1951

insu-00715950
https://hal-insu.archives-ouvertes.fr/insu-00715950
https://hal-insu.archives-ouvertes.fr/insu-00715950/document
https://hal-insu.archives-ouvertes.fr/insu-00715950/file/Jolivet-Aegean_Tectonophysics-2012.pdf
DOI : 10.1016/j.tecto.2012.06.011

Éditeur(s) : HAL CCSD Springer Verlag
Résumé : International audience
This paper presents a synthesis of a multidisciplinary study carried out along the Nîmes Roman aqueduct, located in the southeast part of France. The study was motivated by archaeologists attempting to explain the partial destructions of only one aerial bridge of the aqueduct (Pont de la Lône). Given its close proximity to the Nîmes seismically active fault, a possible seismic origin for the destructions was invoked. Seismologists and structural engineers thus carried out a variety of field and numerical investigations to test the seismic hypothesis. Supporting field evidence was found first along the aerial bridge section of the aqueduct: broken stalactites, arch warping, cracks and destruction of the bridge just above a breast wall shortly after its construction. Secondly, the underground part of the canal was analysed: irregularity in the thickness of calcite deposits of the canal walls, presence of numerous cracks, horizontal shift of the otherwise linear structure of the canal and presence of calcite twins in the deposits, found only where the canal crosses the Nîmes fault system. Numerical modelling and experimental results show that (1) only the Pont de la Lône would have suffered serious damage under seismic solicitation (assuming an M6 earthquake at 10 km distance). The second aerial bridge, the three levels arches Pont du Gard, an historical monument still standing today, would have suffered less damage, due to its very different fundamental frequency of around 0.4 Hz, far from the amplified seismic near-field spectrum; (2) the numerical models also show that a fall of the canal wall would require a higher magnitude event (M > 6); (3) the presence of calcite twinning requires a differential static stress of 4 MPa or greater, which can only be achieved very close to the fault rupture of a M > 6 earthquake; (4) finally, local surface rupturing of such a fault would also corroborate the hypothesis that the observed offset of the canal may be partly seismically induced. Although other possible origins for each individual evidence may not be excluded, the observed spatiotemporal concentration of architectural/geological anomalies together with the numerical results allow us to support a possible co-seismic origin for these disorders, indirectly attesting to the potential seismic activity (M > 6) of the nearby Nîmes fault. Furthermore, following the conclusions of archaeological studies, the disorders occurred between 250 and 350 year AD, thus providing timing for this possible seismic event, an essential parameter in seismic hazard analysis. These results validate the archaeo-seismological approach as a tool that may help improve the knowledge of major infrequent earthquakes in areas of moderate seismic activity.
ISSN: 0921-030X

hal-00379064
https://hal.archives-ouvertes.fr/hal-00379064
DOI : 10.1007/s11069-008-9276-9

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
New high-resolution marine data acquired aboard R/V Le Suroît was used to map active normal faults offshore Montserrat in greater detail. The main faults of the Montserrat-Havers fault zone have cumulative scarps up to 200 m high, and offset sedimentary layers by hundreds of meters. They are arranged in a right-stepping, en echelon, trans-tensional array, which confirms that they accommodate the left-lateral component of motion resulting from slip partitioning of oblique convergence along the volcanic arc. They cut across Montserrat's recent volcanic complex. Faulting and fissuring exerted control on the position of andesitic domes, which are aligned along the N110°E average fault trend. The ≈10 km-long fault segments that cross the island could produce damaging, M ≈ 6 events comparable to the shallow, 16 March 1985, Mw∼6.3 earthquake that ruptured a submarine, N140°E striking, left-lateral fault near Redonda.
ISSN: 0094-8276

insu-01586768
https://hal-insu.archives-ouvertes.fr/insu-01586768
https://hal-insu.archives-ouvertes.fr/insu-01586768/document
https://hal-insu.archives-ouvertes.fr/insu-01586768/file/Feuillet_et_al-2010-Geophysical_Research_Letters.pdf
DOI : 10.1029/2010GL042556

Éditeur(s) : CRILLASH : Centre de Recherches Interdisciplinaires en Lettres, Langues, Arts et Sciences Humaines
Extrait de : "L'évaluation en langues étrangères à l'école et/ou à l'université. Pour une démarche qualité : entre tensions, ruptures et continuités" : journée d'étude, le 27 mai 2015. Université des Antilles et de la Guyane
Description : Dans un contexte où l'impact de la maîtrise avérée des langues (seconde(s) et/ou étrangères) est désormais souvent requis, nous interrogeons dans cette communication les pratiques et les postures qui, entre tensions, ruptures et continuités, peuvent permettre de mettre en place une évaluation plus éthique, plus juste et plus pertinente en langue étrangère. Au centre de notre questionnement, les concepts de validité et de fiabilité , qui constituent le socle de toute évaluation de qualité, guident une analyse des modèles didactiques existants et interrogent la mise en place de procédures explicites basées sur le principe de contradiction à chaque étape du processus.
Siècle(s) traité(s) : 21
Droits : CC-BY-NC-ND - Attribution - Pas d'utilisation commerciale - Pas de modification
Permalien : http://www.manioc.org/fichiers/V15192
V15192

Éditeur(s) : HAL CCSD Oxford University Press (OUP)
Résumé : International audience
To improve earthquake location, we create a 3-D a priori P-wave velocity model (3-DVM) that approximates the large velocity variations of the Ecuadorian subduction system. The 3-DVM is constructed from the integration of geophysical and geological data that depend on the structural geometry and velocity properties of the crust and the upper mantle. In addition, specific station selection is carried out to compensate for the high station density on the Andean Chain. 3-D synthetic experiments are then designed to evaluate the network capacity to recover the event position using only P arrivals and the MAXI technique. Three synthetic earthquake location experiments are proposed: (1) noise-free and (2) noisy arrivals used in the 3-DVM, and (3) noise-free arrivals used in a 1-DVM. Synthetic results indicate that, under the best conditions (exact arrival data set and 3-DVM), the spatiotemporal configuration of the Ecuadorian network can accurately locate 70 per cent of events in the frontal part of the subduction zone (average azimuthal gap is 289° ± 44°). Noisy P arrivals (up to ± 0.3 s) can accurately located 50 per cent of earthquakes. Processing earthquake location within a 1-DVM almost never allows accurate hypocentre position for offshore earthquakes (15 per cent), which highlights the role of using a 3-DVM in subduction zone. For the application to real data, the seismicity distribution from the 3-D-MAXI catalogue is also compared to the determinations obtained in a 1-D-layered VM. In addition to good-quality location uncertainties, the clustering and the depth distribution confirm the 3-D-MAXI catalogue reliability. The pattern of the seismicity distribution (a 13 yr record during the inter-seismic period of the seismic cycle) is compared to the pattern of rupture zone and asperity of the Mw = 7.9 1942 and the Mw = 7.7 1958 events (the Mw = 8.8 1906 asperity patch is not defined). We observe that the nucleation of 1942, 1958 and 1906 events coincides with areas of positive Simple Bouguer anomalies and areas where marine terraces are still preserved on the coastal morphology. From north to south: (1) the 1958 rupture zone is almost aseismic and is attributed to a zone of high coupling; (2) south of the Galera alignment (perpendicular to the trench), the 1942 rupture zone presents moderate seismicity, deeper on the seismogenic interplate zone, and abutting on the Jama cluster (to the south). This cluster is facing the Cabo Pasado cap and positive Bouguer anomalies on the overriding margin. We suspect that this cluster reflects a zone of local asperity (partial coupling). South of the Jama cluster, the spherical aseismic zone in the Bahia area is interpreted as having a low seismic coupling (steady creep motion or slow slip events). We suspect that the site that generated the three M > 7 events (1896, 1956 and 1998) correspond to a small patch of strong coupling. To the south, in the Manta-Puerto Lopez zone, the seismicity is mainly organized in earthquake swarms (1998, 2002, 2005). Although slow slip events have been observed in the area (Vallée et al. submitted), we infer from the coastline shape, the marine terraces and the high positive Bouguer anomalies that the seismicity here might reveal a significant amount of seismic coupling.
ISSN: 0956-540X

hal-00873478
https://hal.archives-ouvertes.fr/hal-00873478
DOI : 10.1093/gji/ggs083

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
The region of Bhutan is thought to be the only segment of the Himalayas not having experienced a major earthquake over the past half millennium. A proposed explanation for this apparent seismic gap is partial accommodation of the India-Asia convergence further south across the Shillong Plateau, yet the seismic behavior of the Himalayan megathrust in Bhutan is unknown. Here we present historical documents from the region reporting on an earthquake in 1714 A.D. and geological evidence of surface rupture to constrain the latest large event in this area. We compute various earthquake scenarios using empirical scaling relationships relating magnitude with intensity, source location and rupture geometry. Our results constrain the 1714 A.D. earthquake to have ruptured the megathrust in Bhutan, most likely during a M7.5–8.5 event. This finding reclassifies the apparent seismic gap to a former information gap and implies that the entire Himalayan arc has a high level of earthquake potential.
ISSN: 0094-8276

hal-01467822
https://hal.archives-ouvertes.fr/hal-01467822
DOI : 10.1002/2016GL071033

Éditeur(s) : HAL CCSD Nature Publishing Group
Résumé : International audience
Lateral variations along the Himalayan arc are suggested by an increasing number of studies and carry important information about the orogen’s segmentation. Here we compile the hitherto most complete land gravity dataset in the region which enables the currently highest resolution plausible analysis. To study lateral variations in collisional structure we compute arc-parallel gravity anomalies (APaGA) by subtracting the average arc-perpendicular profile from our dataset; we compute likewise for topography (APaTA). We find no direct correlation between APaGA, APaTA and background seismicity, as suggested in oceanic subduction context. In the Himalayas APaTA mainly reflect relief and erosional effects, whereas APaGA reflect the deep structure of the orogen with clear lateral boundaries. Four segments are outlined and have disparate flexural geometry: NE India, Bhutan, Nepal & India until Dehradun, and NW India. The segment boundaries in the India plate are related to inherited structures, and the boundaries of the Shillong block are highlighted by seismic activity. We find that large earthquakes of the past millennium do not propagate across the segment boundaries defined by APaGA, therefore these seem to set limits for potential rupture of megathrust earthquakes.
ISSN: 2045-2322

hal-01420404
https://hal.archives-ouvertes.fr/hal-01420404
https://hal.archives-ouvertes.fr/hal-01420404/document
https://hal.archives-ouvertes.fr/hal-01420404/file/hetenyi2016.pdf
DOI : 10.1038/srep33866

Éditeur(s) : HAL CCSD American Association for the Advancement of Science
Résumé : International audience
Large earthquakes produce crustal deformation that can be quantified by geodetic measurements, allowing for the determination of the slip distribution on the fault. We used data from Global Positioning System (GPS) networks in Central Chile to infer the static deformation and the kinematics of the 2010 moment magnitude (M-w) 8.8 Maule megathrust earthquake. From elastic modeling, we found a total rupture length of similar to 500 kilometers where slip (up to 15 meters) concentrated on two main asperities situated on both sides of the epicenter. We found that rupture reached shallow depths, probably extending up to the trench. Resolvable afterslip occurred in regions of low coseismic slip. The low-frequency hypocenter is relocated 40 kilometers southwest of initial estimates. Rupture propagated bilaterally at about 3.1 kilometers per second, with possible but not fully resolved velocity variations.
ISSN: 0036-8075

hal-00783213
https://hal.archives-ouvertes.fr/hal-00783213
DOI : 10.1126/science.1204132

Éditeur(s) : HAL CCSD
Résumé : The North Tehran Fault is located at the southernmost piedmont of Central Alborz, north of Iran. It stands out as a major active fault menacing directly the city of Tehran, a 12 million people metropolis, and would have been the source of several major historical earthquakes in the past. The fault zone extends up to 110km and corresponds mainly to a reverse fault mostly crossing the northern suburbs of the Tehran metropolis, although NTF in its eastern part is characterized more as a left lateral strike slip active fault. We carried out a paleoseismological study of the fault zone in order to determine whether the fault was activated during the Holocene, and to define the characteristics of its activity in terms of kinematics and magnitude. Here in this paper we present only a part of our paleoseismological investigations trench TE2. Observations fromtwo trenches dug across the North Tehran fault scarp reveal evidence for a maximum of six surface-rupturing events within the late quaternary. According to the empirical relationships among average displacement per event and Moment magnitude [25], we can estimate six events Mw~ 6.5 associated with these ruptures in TE2 trench.
Journal of Seismology and Earthquake Engineering

hal-00758375
https://hal.archives-ouvertes.fr/hal-00758375

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
The 856 A.D. Qumis earthquake (M7.9) is the most destructive earthquake to have occurred in Iran, killing more than 200,000 people and destroying the cities of Damghan and the old Parthian capital of Shahr-i Qumis (Hecatompylos). This study combines evidence of historical seismicity with observations of the geomorphology and paleoseismology to provide the first detailed description of active faulting in the Damghan region of the east Alborz mountains, Iran. Regional left-lateral shear is accommodated on the Astaneh, Damghan, and North Damghan faults. Quaternary alluvial fans have been displaced along the Astaneh fault, with 15–20 m stream offsets recording the cumulative displacement over the last two to five earthquakes. A paleoseismology study from a single trench along a 5–10 km segment of the Astaneh fault reveals a rupture prior to 1300 A.D. and significantly later than 600 B.C. Despite the limitations of a single trench in documenting the spatial and temporal evolution of the fault over the late Quaternary, we are nevertheless able to bracket the last event to a time period consistent with the 856 A.D. earthquake. Two older earthquakes were also identified during the Holocene occurring between 600 B.C. and 4600 B.C. and between 4600 B.C. and 9600 B.C. The location of our trench within a bend on the Astaneh fault, which could act as a barrier to rupture propagation, means the three earthquakes recovered from our trench over the Holocene may represent a minimum. Further trenching will reveal how the Astaneh fault ruptures over repeated earthquakes and, consequently, the magnitude and extent of slip during the 856 A.D. earthquake.
ISSN: 0148-0227

hal-00551330
https://hal.archives-ouvertes.fr/hal-00551330
https://hal.archives-ouvertes.fr/hal-00551330v2/document
https://hal.archives-ouvertes.fr/hal-00551330/file/Hollingsworth2010.pdf
DOI : 10.1029/2009JB007185

Éditeur(s) : HAL CCSD Nature Publishing Group
Résumé : International audience
Temperature and fluid pressure conditions control rock deformation and mineralization on geological faults, and hence the distribution of earthquakes1. Typical intraplate continental crust has hydrostatic fluid pressure and a near-surface thermal gradient of 31 ± 15 degrees Celsius per kilometre2, 3. At temperatures above 300–450 degrees Celsius, usually found at depths greater than 10–15 kilometres, the intra-crystalline plasticity of quartz and feldspar relieves stress by aseismic creep and earthquakes are infrequent. Hydrothermal conditions control the stability of mineral phases and hence frictional–mechanical processes associated with earthquake rupture cycles, but there are few temperature and fluid pressure data from active plate-bounding faults. Here we report results from a borehole drilled into the upper part of the Alpine Fault, which is late in its cycle of stress accumulation and expected to rupture in a magnitude 8 earthquake in the coming decades4, 5. The borehole (depth 893 metres) revealed a pore fluid pressure gradient exceeding 9 ± 1 per cent above hydrostatic levels and an average geothermal gradient of 125 ± 55 degrees Celsius per kilometre within the hanging wall of the fault. These extreme hydrothermal conditions result from rapid fault movement, which transports rock and heat from depth, and topographically driven fluid movement that concentrates heat into valleys. Shear heating may occur within the fault but is not required to explain our observations. Our data and models show that highly anomalous fluid pressure and temperature gradients in the upper part of the seismogenic zone can be created by positive feedbacks between processes of fault slip, rock fracturing and alteration, and landscape development at plate-bounding faults.
ISSN: 0028-0836

hal-01685757
https://hal.archives-ouvertes.fr/hal-01685757
DOI : 10.1038/nature22355

Éditeur(s) : HAL CCSD Nature Publishing Group
Résumé : International audience
Assessing seismic hazards remains one of the most challenging scientific issues in Earthsciences. Deep tectonic processes are classically considered as the only persistentmechanism driving the stress loading of active faults over a seismic cycle. Here we show via amechanical model that erosion also significantly influences the stress loading of thrust faultsat the timescale of a seismic cycle. Indeed, erosion rates of about B0.1–20mmyr1, asdocumented in Taiwan and in other active compressional orogens, can raise the Coulombstress by B0.1–10 bar on the nearby thrust faults over the inter-seismic phase. Masstransfers induced by surface processes in general, during continuous or short-lived andintense events, represent a prominent mechanism for inter-seismic stress loading offaults near the surface. Such stresses are probably sufficient to trigger shallow seismicity orpromote the rupture of deep continental earthquakes up to the surface.
ISSN: 2041-1723

insu-01087103
https://hal-insu.archives-ouvertes.fr/insu-01087103
https://hal-insu.archives-ouvertes.fr/insu-01087103/document
https://hal-insu.archives-ouvertes.fr/insu-01087103/file/Steer2014_NatureComm_accepted.pdf
DOI : 10.1038/ncomms6564

Éditeur(s) : Elsevier
Résumé : We describe for the first time a set of large active thrusts and folds near the foot of the easternmost Algerian margin, Western Mediterranean, from swath bathymetry and high-resolution seismic data acquired in 2005 during the Maradja2/Samra cruise. This active system resumes a previous passive margin and creates growth strata deposition on the limbs of large folds, resulting in the development of perched basins at the foot of the margin since less than similar to 1 Ma. They form a set of overlapping fault segments verging toward the Algerian basin, in a way similar to what has been observed off eastern Algiers on the rupture zone of the 2003 Mw 6.8 Boumerdes earthquake. The horizontal shortening rate across large folds is estimated to be of the order of 1 mm/yr. Although no historical earthquakes are reported here, these fault segments could have been responsible for large (M similar to 7.5) events in the past. This young tectonic system further supports the hypothesis of subduction inception of the Neogene oceanic lithosphere in the context of the Africa-Eurasia convergence.
Marine Geology (0025-3227) (Elsevier), 2009-06 , Vol. 261 , N. 1-4 , P. 17-32

Droits : 2009 Published by Elsevier Inc.
http://archimer.ifremer.fr/doc/2009/publication-6850.pdf
DOI:10.1016/j.margeo.2008.05.016
http://archimer.ifremer.fr/doc/00000/6850/

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
After the January 12, 2010, Haiti earthquake, we deployed a mainly offshore temporary network of seismologic stations around the damaged area. The distribution of the recorded aftershocks, together with morphotectonic observations and mainshock analysis, allow us to constrain a complex fault pattern in the area. Almost all of the aftershocks have a N‐S compressive mechanism, and not the expected left‐lateral strike‐slip mechanism. A first‐order slip model of the mainshock shows a N264°E north‐dipping plane, with a major left‐lateral component and a strong reverse component. As the aftershock distribution is sub‐parallel and close to the Enriquillo fault, we assume that although the cause of the catastrophe was not a rupture along the Enriquillo fault, this fault had an important role as a mechanical boundary. The azimuth of the focal planes of the aftershocks are parallel to the north‐dipping faults of the Transhaitian Belt, which suggests a triggering of failure on these discontinuities. In the western part, the aftershock distribution reflects the triggering of slip on similar faults, and/or, alternatively, of the south‐dipping faults, such the Trois‐Baies submarine fault. These observations are in agreement with a model of an oblique collision of an indenter of the oceanic crust of the Southern Peninsula and the sedimentary wedge of the Transhaitian Belt: the rupture occurred on a wrench fault at the rheologic boundary on top of the under‐thrusting rigid oceanic block, whereas the aftershocks were the result of the relaxation on the hanging wall along pre‐existing discontinuities in the frontal part of the Transhaitian Belt.
ISSN: 0094-8276

insu-00643489
https://hal-insu.archives-ouvertes.fr/insu-00643489
https://hal-insu.archives-ouvertes.fr/insu-00643489/document
https://hal-insu.archives-ouvertes.fr/insu-00643489/file/GRL-haiti.2011.pdf
DOI : 10.1029/2011GL049799

Éditeur(s) : HAL CCSD
Résumé : Several major earthquakes have struck the 2500 km long Himalayan range during the past century. However, both the maximum size of such earthquakes and the probability of occurrence of a magnitude 9 megaquake are still a mater of debate. In this framework it is of key importance to investigate the lateral segmentation of the Himalayan arc in order to deepen our understanding of the mechanisms that control such events as well as their extents. Besides the remarkably uniform tectonic set-up and the fact that most studies on the Himalayas have focused on Central Nepal, several indications of along strike changes can be gathered.This thesis brings new constraints on lateral variations of crustal structure and of deformation between western Nepal (~80°E) and eastern Bhutan (~92°E).The first part of this thesis focuses on the lateral variations of crustal structure. In the past three years we have carried out four land gravity campaigns. We have established 366 new gravity measurement points to fill the data gaps in central and western Nepal as well as in Bhutan. This new dataset, together with available seismological data, is used to constrain thermo-mechanical models of the bending of the India plate underneath the Himalayas. While the inferred crustal geometry does not exhibit major along-strike variations over central and eastern Nepal, the shorter wavelength flexure of the lithosphere in Bhutan is associated with a weaker upper mantle rheology.The second part focuses on the lateral variations of recent deformation in the Himalayas. Fifteen years of paleoseismological investigations have extended the catalogue of major Himalayan events over the last millennium. Combining these information with secular loading, we assess the spatial and temporal stress changes on the Main Himalayan Thrust along the orogen over the last nine centuries. Our calculations indicate that inter-seismic loading has now nearly overcome the Coulomb stress decrease caused by the great ~1100 medieval earthquake. Our results also point out that the 1897 Shillong plateau earthquake does not have a major influence on the stress accumulated on the Main Himalayan Thrust since then. In order to better characterize active tectonics in the Bhutan Himalayas where no studies were done so far, we carried out a morphotectonic analysis in the south-central part of the kingdom. We show that the same amount of Holocene deformation is accommodated on the frontal thrust in Bhutan as on the neighbouring portions of the Himalayan arc. We also find evidences for two major (M>8) earthquakes on this thrust in the Bhutan Himalayas during the last millennium. Our results therefore show that Bhutan cannot be considered as a seismic gap. They also challenge the interpretation of one single ~1100 medieval mega-event that would have ruptured the Main Frontal Thrust from central Nepal to eastern Bhutan.
Au cours du dernier siècle, plusieurs séismes majeurs ont affecté l'Himalaya. Cependant, la taille maximale de ces événements et la probabilité d'occurrence de méga-séismes avec des magnitudes proches de 9 sont toujours matière à débat. L'étude de la segmentation de l'arc Himalayen est donc primordiale afin de comprendre les mécanismes qui contrôlent ces séismes ainsi que leur extension spatiale. La compréhension du cycle sismique en Himalaya est aujourd'hui essentiellement basée sur des études menées au Népal central, ce qui limite notre connaissance de son fonctionnement tri-dimensionnel. Ce travail de thèse permet d'apporter de nouvelles contraintes sur les variations latérales de la déformation crustale dans la zone comprise entre l'ouest Népal (~80°E) et l'est Bhoutan (~92°E). La première partie de cette thèse est consacrée à l'étude des variations latérales de la structure lithosphérique. Quatre campagnes gravimétriques ont été réalisées entre 2010 et 2012. Elles ont permis d'étendre le réseau gravimétrique Népalais jusqu'à l'ouest Népal et d'établir le premier réseau gravimétrique Bhoutanais. Ce nouveau jeu de données, combiné avec les données sismologiques disponibles, permet de contraindre des modèles thermo-mécaniques de la flexure de la plaque Indienne sous l'Himalaya. Les résultats suggèrent qu'il n'existe pas de variations latérales majeures du comportement mécanique de la lithosphère Indienne entre le centre et l'est Népal contrairement au Bhoutan où une rigidité flexurale plus faible est nécessaire pour expliquer les données.La deuxième partie de cette thèse est consacrée à l'étude des variations latérales des déformations récentes dans le prisme Himalayen. Les études paléosismologiques menées depuis 15 ans en Himalaya ont permis d'étendre le catalogue des événements majeurs sur le dernier millénaire. En intégrant à la fois les contraintes disponibles sur ces séismes majeurs et le chargement séculaire, nous étudions les variations spatiales et temporelles de l'état de contrainte du chevauchemlent Himalayen principal le long de l'arc. Nos calculs montrent que même dans la cas où un méga-séisme se serait produit en ~1100 en Himalaya, le chargement séculaire a quasiment compensé la chute de contrainte associée. Les modèles montrent aussi que le séisme du Shillong ne joue pas un rôle majeur sur les contraintes accumulées sur le chevauchement Himalayen depuis 1897 au niveau du Bhoutan. Enfin, nous présentons les premières contraintes sur la tectonique active au Bhoutan. L'étude morphotectonique réalisée au centre du Sud-Bhoutan a permis de montrer que la majeure partie de la déformation Holocène est accommodée au niveau du front Himalayen, comme au Népal. Nous montrons aussi des évidences de ruptures de surface avec des décalages verticaux de plusieurs mètres associés à deux séismes majeurs sur le dernier millénaire. Ces évidences remettent en cause l'interprétation d'un méga-séisme en ~1100.
https://tel.archives-ouvertes.fr/tel-01002381

NNT : 2013MON20074
tel-01002381
https://tel.archives-ouvertes.fr/tel-01002381
https://tel.archives-ouvertes.fr/tel-01002381/document
https://tel.archives-ouvertes.fr/tel-01002381/file/35970_BERTHET_2013_archivage_cor.pdf

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
The North Tehran Fault (NTF) is located at the southernmost piedmont of Central Alborz and crosses the northern suburbs of the Tehran metropolis and adjacent cities, where ∼15 million people live. Extending over a length of about 110 km, the NTF stands out as a major active fault and represents an important seismic hazard for the Iranian capital after historical seismicity. In order to characterize the activity of the NTF in terms of kinematics, magnitude and recurrence intervals of earthquakes, we carried out a first paleoseismological study of the fault within its central part between Tehran and Karaj cities. We opened a trench across a 3 m-high fault scarp affecting Quaternary deposits. Our study shows that the scarp is the result of repeated events along a main N115°E trending shallow dipping thrust fault, associated with secondary ruptures. From the trench analysis and Infrared Stimulated Luminescence (IRSL) dating of fault-related sediments, we interpreted between 6 and 7 surface-rupturing events that occurred during the past 30 kyrs. Their magnitudes (estimated from the displacements along the faults) are comprised between 6.1 and 7.2. The two last events - the largest - occurred during the past 7.9 ± 1.2 ka, which yields a Holocene slip rate of ∼0.3 mm/yr. The 7 earthquakes scenario suggests a regular periodicity with a mean recurrence interval of ∼3.8 kyrs. However, the two most recent events could correspond to the two largest historical earthquakes recorded in the area (in 312-280 B.C. and 1177 A.D.), and therefore suggest that the NTF activity is not regular.
ISSN: 0148-0227

hal-00757568
https://hal.archives-ouvertes.fr/hal-00757568
https://hal.archives-ouvertes.fr/hal-00757568v2/document
https://hal.archives-ouvertes.fr/hal-00757568/file/ritz2012.pdf
DOI : 10.1029/2012JB009147

Éditeur(s) : HAL CCSD
Résumé : The trophic endosymbiosis interaction between a cnidarian host and its photosynthetic dinoflagellatessymbionts form the basis of coral reef ecosystems. Cnidarians host their symbionts in gastrodermis cells, in a phagocytosis-derived vacuole. Establishment and maintenance of the symbiotic interaction depend on an intimate molecular communication between the two partners. However, environmental and/or anthropogenic disturbances can lead to the breakdown of the symbiotic association, which is responsible for the worldwide decline of coral reefs. The main objectives of my research project are to improve the knowledge regarding symbiosis maintenance and disruption mechanisms, but also to define the molecular key players involved at the symbiotic interface in the sea anemone, Anemonia viridis. First, we have described the cellular mechanisms involved in the different types of symbiosis breackdown. Meanwhile, the characterization of npc1 and npc2 genes (involved in endosomal sterol transport), showed a duplication and a sub-functionalization of the npc2d gene. Both NPC1 and NPC2 proteins are expressed around symbionts. We therefore suggest that the duplicated protein NPC2-d is a biomarker of symbiosis health and that NPC1 protein is a marker of the perisymbiotic membrane. We then developed a protocol to characterize the proteome of the symbiotic interface between the two symbiotic partners. The newly-identified symbiotic key players will increase the general knowledge on the symbiotic interaction and its regulation during both stable and bleaching conditions.
L’endosymbiose trophique établie entre un hôte Cnidaire et ses symbiotes Dinoflagellés photosynthétiques est à l’origine du succès évolutif des écosystèmes coralliens. Les symbiotes sont internalisés par un mécanisme de phagocytose et maintenus dans les cellules du gastroderme de l'hôte. La symbiose est régie par un dialogue moléculaire intime entre les deux partenaires, interrompu lors de perturbations environnementales ou anthropiques, responsables du déclin mondial des récifs coralliens. Les objectifs de mon projet de recherche sont de définir les acteurs moléculaires localisés à l’interface symbiotique chez l’anémone de mer, Anemonia viridis. Premièrement, nous avons étudié les mécanismes cellulaires impliqués dans différents types de rupture de la symbiose et mis en évidence des phénomènes d’apoptose, nécrose et symbiophagie. Parallèlement, nous avons caractérisé chez l’anémone les gènes npc1 et npc2, impliqués chez les vertébrés dans le transport endosomal de stérols, et dont l’expression est modulée par l’état symbiotique. Nous avons pu montrer que le gène npc2d est issus d’une duplication et vraisemblablement d’une sub-fonctionnalisation et que les protéines NPC1 et NPC2 sont exprimées au voisinage des symbiotes. Nous proposons donc que la protéine NPC2-d soit utilisée comme marqueur de l’état de santé des Anthozoaires symbiotiques et que la protéine NPC1 soit un marqueur de la membrane périsymbiotique. Nous avons également développé un protocole afin d’identifier les protéines associées à l’interface symbiotique entre les deux partenaires. A terme, les cibles identifiées permettront une meilleure compréhension des mécanismes qui régulent la relation symbiotique.
https://tel.archives-ouvertes.fr/tel-01673491

NNT : 2015NICE4105
tel-01673491
https://tel.archives-ouvertes.fr/tel-01673491
https://tel.archives-ouvertes.fr/tel-01673491/document
https://tel.archives-ouvertes.fr/tel-01673491/file/2015NICE4105.pdf

Éditeur(s) : Soc Geol France
Résumé : The Lesser Antilles subduction zone has produced no recent strong thrust earthquakes, making it difficult to quantify the seismic hazard from such events. The Lesser Antilles arc has a low subduction rate and an accretionary wedge that is very wide at its southern end. To investigate the effect of the wedge on seismogenesis, numerical models of forearc thermal structure were constructed along six transects perpendicular to the arc in order to determine the thermally predicted width of the seismogenic zone. The geometry of each section is constrained by published seismic profiles and crustal models derived from gravity and seismic data and by earthquake hypocenters at depth. A major constraint on the deep part of the model is that mantle temperature beneath the volcanic arc should achieve a temperature of 1,100 degrees C to generate partial melts. Predicted surface heat flow is compared to the available heat flow observations. Thermal modeling results indicate a systematic southward increase in the width of the seismogenic zone, more than doubling in width from north to south and corresponding to a dramatic southward increase in forearc width (distance from the arc to the deformation front of the accretionary wedge). The minimum width of the seismogenic zone (distance between the intersections of the subduction interface with the 150 degrees C and 350 degrees C isotherms) increases from about 80 km, north of 16 degrees N, to 230 km, at 13 degrees N. The maximum width (between the 100 degrees C and 450 degrees C isotherms) ranges from about 150 km in the north to up to 320 km in the south. This large variation in the width of the seismogenic zone is a consequence of the increasing width of the accretionary wedge to the south, caused by the increased thickness of sediment on the subducting plate. There is good agreement between the thermally predicted seismogenic limits and the sparse distribution of recorded thrust earthquakes, which are observed only in the northern portion of the arc. Possible scenarios for mega-thrust earthquakes are discussed. Depending on the segment length (along-strike) of the rupture plane, the occurrence of an event of magnitude 8-9 cannot be excluded.
L’absence de grands séismes récents à mécanismes chevauchants dans la zone de subduction des Petites Antilles rend difficile l’évaluation de l’aléa sismique lié à de tels événements. L’arc des Petites Antilles est caractérisé par une faible vitesse de subduction et par la présence d’un prisme d’accrétion très développé à son extrémité méridionale. Afin d’évaluer les effets de la largeur de ce prisme sur la genèse des séismes, nous avons étudié six sections perpendiculaires à l’arc, du nord au sud de celui-ci, pour déterminer la largeur de la zone sismogène prédite par les modèles thermiques appliqués à chacune de ces coupes. La géométrie de ces dernières est contrainte par les profils sismiques publiés, par les modèles de structure crustale déduits des données gravitaires et sismiques, et enfin par la distribution des hypocentres des séismes. Un contrôle important permettant de tester la validité des modèles thermiques en profondeur est qu’une température minimale de 1 100oC, compatible avec la fusion partielle du manteau hydraté, doit être atteinte sous l’arc volcanique actif. Par ailleurs, le flux thermique en surface prédit par ces modèles doit être compatible avec les mesures de flux de chaleur. Les modèles thermiques retenus d’après ces critères montrent une augmentation du simple au double vers le sud de la largeur de la zone sismogène, qui correspond à un élargissement considérable de la taille du domaine avant-arc. En effet, la largeur minimale de la zone sismogène (définie comme la distance entre les intersections de l’interface des plaques avec les isothermes 150o et 350oC) augmente d’environ 80 km au nord de 16oN jusqu’à 230 km à 13oN. La largeur maximale de cette zone (définie par les intersections de l’interface avec les isothermes 100o et 450oC) augmente, quant à elle, d’environ 150 km au nord jusqu’à 320 km au sud de l’arc. Cette variation considérable est la conséquence de l’augmentation de la largeur du prisme d’accrétion, elle-même causée par l’accumulation croissante des sédiments déposés sur la plaque plongeante. Les largeurs de la zone sismogène prédites à l’aide des modèles thermiques sont en bon accord avec les rares données disponibles sur les séismes à mécanismes chevauchants dans la partie nord de l’arc. Les scénarios possibles relatifs à des méga-séismes de ce type n’excluent pas de futurs événements atteignant des magnitudes de 8 à 9.
Bulletin De La Societe Geologique De France (0037-9409) (Soc Geol France), 2013 , Vol. 184 , N. 1-2 , P. 47-59

Droits : 2013 Societe Geologique de France
http://archimer.ifremer.fr/doc/00140/25140/29432.pdf
DOI:10.2113/gssgfbull.184.1-2.47
http://archimer.ifremer.fr/doc/00140/25140/

Éditeur(s) : HAL CCSD Elsevier Masson
Résumé : Extension fractures of two types defined by the mean stress σ were generated in a synthetic rock analogue material. When σ is very small, the fractures are mode I cracks with smooth surfaces. At higher σ, these surfaces have plumose topography, with the amplitude increasing with σ. Both SEM observations and mechanical measurements show that fractures/discontinuities in the latter case are initiated as dilatancy localization bands. They form under tensile or slightly compressive normal stress and can be seen as running constitutive instabilities. The similarity between the plumose fractography of the experimental fractures and natural joints suggests similarity in the formation mechanism.
ISSN: 1631-0721

hal-00585886
https://hal.archives-ouvertes.fr/hal-00585886
DOI : 10.1016/j.crme.2011.01.002

Éditeur(s) : HAL CCSD
Résumé : National audience
Objectives To define the different stages of spontaneous labour. To determine the indications, modalities of use and the effects of administering synthetic oxytocin. And to describe undesirable maternal and perinatal outcomes associated with the use of synthetic oxytocin. Method A systematic review was carried out by searching Medline database and websites of obstetrics learned societies until March 2016. Results The 1st stage of labor is divided in a latence phase and an active phase, which switch at 5 cm of cervical dilatation. Rate of cervical dilatation is considered as abnormal below 1 cm per 4 hour during the first part of the active phase, and blow 1 cm per 2 hours above 7 cm of dilatation. During the latent phase of the first stage of labor, i.e. before 5 cm of cervical dilatation, it is recommended that an amniotomy not be performed routinely and not to use oxytocin systematically. It is not recommended to expect the active phase of labor to start the epidural analgesia if patient requires it. If early epidural analgesia was performed, the administration of oxytocin must not be systematic. If dystocia during the active phase, an amniotomy is recommended in first-line treatment. In the absence of an improvement within an hour, oxytocin should be administrating. However, in the case of an extension of the second stage beyond 2 hours, it is recommended to administer oxytocin to correct a lack of progress of the presentation. If dynamic dystocia, it is recommended to start initial doses of oxytocin at 2 mUI/min, to respect at least 30 min intervals between increases in oxytocin doses delivered, and to increase oxytocin doses by 2 mUI/min intervals without surpassing a maximum IV flow rate of 20 mUI/min. The reported maternal adverse effects concern uterine hyper-stimulation, uterine rupture and postpartum haemorrhage, and those of neonatal adverse effects concern foetal heart rate anomalies associated with uterine hyper-stimulation, neonatal morbidity and mortality, neonatal jaundice, weak suck/poor breastfeeding latch and autism. Conclusion The widespread use of oxytocin during spontaneous labour must not be considered as simply another inoffensive prescription without any possible deleterious consequences for mother or foetus. Conditions for administering the oxytocin must therefore respect medical protocols. Indications and patient consent have to be report in the medical file. © 2016 Elsevier Masson SAS
Revue Sage - Femme

hal-01467543
https://hal-univ-rennes1.archives-ouvertes.fr/hal-01467543
DOI : 10.1016/j.sagf.2016.11.006