Éditeur(s) : HAL CCSD Wiley
Résumé : International audience
An intensive water vapour intercomparison effort, involving airborne and ground-based water vapour lidar systems, was carried out in the framework of the COPS experiment. The main objective of this paper is to provide accurate error estimates for these systems. Comparisons between the ground-based Raman lidar BASIL and the airborne CNRS DIAL (Differential Absorption Lidar) indicate a mean relative bias between the two sensors, calculated with respect to the mean value of −2.13% (−0.034 g kg−1) in the altitude region 0.5-3.5 km, while comparisons between BASIL and the airborne DLR DIAL lead to a mean relative bias of 1.87% (0.018 g kg−1) in this same altitude region. Comparisons between the ground-based UHOH DIAL and the CNRS DIAL indicate a bias of −3.2% (−0.37 × 1022 m−3) in the altitude range 1.5-4.5 km, while comparisons between the UHOH DIAL and the DLR DIAL indicate a bias of 0.83% (0.06 × 1022 m−3) in this same altitude range. Based on the available comparisons between the ground-based Raman lidar BERTHA and the CNRS DIAL, the mean relative bias is found to be −4.37% (−0.123 g kg−1) in the altitude region 0.5-4.5 km. Comparisons between the ground-based IGN Raman lidar and the CNRS DIAL indicate a bias of 3.18% (0.55 g kg−1) in the altitude range from 0.5 to 4.5 km, while comparisons between the CNRS DIAL and DLR DIAL result in a mean relative bias of 3.93% (1.1 × 1022 m−3) in the altitude interval 0.5-4.0 km. Based on the available statistics of comparisons, benefiting from the fact that the CNRS DIAL was able to be compared with all other lidar systems, and putting equal weight on the data reliability of each instrument, overall relative values for BASIL, BERTHA, IGN Raman lidar, UHOH DIAL, DLR DIAL, and CNRS DIAL, with respect to the mean value, are found to be −0.38, −2.60, 4.90, −1.43, −2.23 and 1.72%, respectively.
ISSN: 0035-9009

hal-00572576
https://hal.archives-ouvertes.fr/hal-00572576
DOI : 10.1002/qj.697

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The NW-trending Talas-Ferghana Fault (TFF) in Kyrgyzstan, Central Asia, is one of the largest intracontinental strike-slip faults in the world. It extends over a distance of more than 2000 km from southern Tourghai to western Tarim and exhibits a maximum dextral offset of ∼200 km during the late Palaeozoic to present. The history of the fault provides important insights for the understanding of the evolution of southern Central Asia but remains poorly constrained due to lack of reliable geochronological data. We present new Ar-Ar ages and structural data from the Kyrgyz West Tianshan, that elucidate the kinematic history of the TFF in the Palaeozoic and Mesozoic. 40Ar/39Ar ages on mylonitic white micas document a deformational history consisting of several episodes. A late Carboniferous age of 312 ± 4 Ma point to initiation of top-to-the-south and dextral transpressional deformation during a metamorphic overprint in Precambrian and Palaeozoic rocks along the northern compartment of the TFF. The main phase of dextral motion along the entire fault occurred in the Permian as suggested by minimum ages of 260-290 Ma obtained at two different locations in the NW and central parts of the TFF. Partial isotopic resetting occurred between 240 and 210 Ma and younger ages of <200-210 Ma are ascribed to late brittle reactivation and hydrothermal fluid flow in the Late Triassic to Early Jurassic times. The Jurassic trans-tensional phase is featured by emplacement of 195 ± 3 Ma pegmatitic dykes. The Ar-Ar mineral ages and structural data argue for a major phase of dextral shearing, affecting the entire region from the West Tianshan to Mongolia in the late Permian and leading to formation of almost equally spaced major NW-trending dextral strike-slip faults. The uniform character of this deformation indicates that the process of amalgamation in this part of the CAOB ended prior to the late Permian, and Central Asia evolved as a single coherent continental block since that time.
ISSN: 0743-9547

hal-00831326
https://hal.archives-ouvertes.fr/hal-00831326
DOI : 10.1016/j.jseaes.2013.02.012

Éditeur(s) : HAL CCSD Oxford University Press (OUP): Policy B - Oxford Open Option D
Résumé : International audience
The aim was to compare the relationship between body composition and body size in two subgroups with different metabolic risk.Body-mass index z-scores (BMIZ), bicipital, tricipital, subscapular and iliac thicknesses were determined in 178 India-originatingGuadeloupian (IOG) adolescents and 481 controls of other origins. Various equations were tested in a regression approach to fit therelationship between BMIZ and iliac thickness, and BMIZ and sum of skinfold thickness. A shift towards higher iliac thickness for a givenBMIZ was observed in IOG adolescents. This supports the idea that the relationship between BMI and risk for non-communicable diseases isethnicity-dependant.
ISSN: 1101-1262

hal-01143534
https://hal.univ-antilles.fr/hal-01143534
DOI : 10.1093/eurpub/cks070

Éditeur(s) : HAL CCSD
Résumé : International audience
In this paper, we prove a new composition theorem for asymptotically antiperiodic and weighted pseudo antiperiodic functions. We also give some sufficient conditions to ensure invertibility of convolution operators in the space of antiperiodic functions. Then we prove the existence and uniqueness of asymptotically antiperiodic mild solutions to some fractional functional integro-differential equations in a Banach space using the Banach's fixed point theorem.
African Diaspora Journal of Mathematics

hal-01678067
https://hal.archives-ouvertes.fr/hal-01678067

Éditeur(s) : HAL CCSD European Geosciences Union
Résumé : International audience
We develop and implement a new method to take into account the impact of waves into the 3-D circulation model SYMPHONIE (Marsaleix et al., 2008, 2009a), following the simplified equations of Bennis et al. (2011) which use glm2z-RANS theory (Ardhuin et al., 2008b). These adiabatic equations are completed by additional parameterizations of wave breaking, bottom friction and wave-enhanced vertical mixing, making the forcing valid from the surf zone through to the open ocean. The wave forcing is performed by wave generation and propagation models WAVEWATCH III® (Tolman, 2008, 2009; Ardhuin et al., 2010) and SWAN (Booij et al., 1999). The model is tested and compared with other models for a plane beach test case, previously tested by Haas and Warner (2009) and Uchiyama et al. (2010). A comparison is also made with the laboratory measurements of Haller et al. (2002) of a barred beach with channels. Results fit with previous simulations performed by other models and with available observational data. Finally, a realistic case of energetic waves travelling over a coast of the Gulf of Lion (in the northwest of the Mediterranean Sea) for which currents are available at different depths as well as an accurate bathymetric database of the 0-10 m depth range, is then simulated. A grid nesting approach is used to account for the different forcings acting at different spatial scales. The simulation coupling the effects of waves and currents is successful to reproduce the powerful northward littoral drift in the 0-15 m depth zone. More precisely, two distinct cases are identified: when waves have a normal angle of incidence with the coast, they are responsible for complex circulation cells and rip currents in the surf zone, and when they travel obliquely, they generate a northward littoral drift. These features are more complicated than in the test cases, due to the complex bathymetry and the consideration of wind and non-stationary processes. Wave impacts in the inner shelf are less visible since wind and regional circulation seem to be the predominant forcings. Besides, a discrepancy between model and observations is noted at that scale, possibly linked to an underestimation of the wind stress. Lastly, this three-dimensional method allows a good representation of vertical current profiles and permits to calculate the shear stress associated with wave and current. Future work will focus on the combination with a sediment transport model.
ISSN: 1812-0806

hal-00766548
https://hal.archives-ouvertes.fr/hal-00766548
https://hal.archives-ouvertes.fr/hal-00766548/document
https://hal.archives-ouvertes.fr/hal-00766548/file/os-8-657-2012.pdf
DOI : 10.5194/osd-8-2417-2011

Éditeur(s) : HAL CCSD Cambridge Scientific Publishers Ltd
Résumé : International audience
https://hal.univ-antilles.fr/hal-01529538
Pointe-à-Pitre, Guadeloupe

ISBN : 1-904868-31-2
hal-01529538
https://hal.univ-antilles.fr/hal-01529538

Éditeur(s) : HAL CCSD Wiley-Blackwell
Résumé : International audience
We mainly study a system of two coupled nonlinear Schrödinger equations where one equation includes gain and the other one includes losses. This model constitutes a generalization of the model of pulse propagation in bire-fringent optical fibers. We answered partially to a question of some authors in [8], that in the Manakov case, the solution stays in L 2 (0, T ; H 1), that means that the solution can not blow up in finite time. More precisely, the bound that is provided in this paper does not seem to be optimal but different than those that has been given from a previous study [8]. Thanks to the way we treat the a priori estimate, we obtain a sharp bound in L 2 (0, T ; H 1), which would be difficult to reach from the study of other authors [8]. The result is illustrated by numerical results which have been obtained with a finite element solver well adapted for that purpose.
ISSN: 0022-2526

Droits : http://creativecommons.org/licenses/by/
hal-01270459
https://hal.archives-ouvertes.fr/hal-01270459
https://hal.archives-ouvertes.fr/hal-01270459/document
https://hal.archives-ouvertes.fr/hal-01270459/file/paperver2.pdf

Éditeur(s) : HAL CCSD Springer Verlag
Résumé : International audience
The upward oil migration in a transparent and rough fracture containing a liquid of higher density is studied experimentally using a light transmission technique. The aperture heterogeneity is also measured by light transmission. The injection of oil in a fracture containing a heavier fluid produces a gravitational fingering instability. Depending on the injection velocity (capillary number, Ca) and the density difference between the two fluids (Bond number, Bo), different patterns are observed during the oil displacements. The width of the finger and its velocity are measured as a function of Bo and Ca. A stability analysis of the interface, based on a generalised Darcy equation in a two-dimensional fracture, allows an accurate description of the experimental results. The order of magnitude of the finger width and its velocity are in good agreement with the calculations, with small disparities due to various unknown fluid flow parameters: capillary pressure, finger thickness in the gap of the fracture, finger tortuosity and oil velocity field into the finger. The theoretical approach allows constructing a (Ca, Bo) phase diagram of stability of the interface.
ISSN: 0169-3913

hal-00429329
https://hal.archives-ouvertes.fr/hal-00429329
DOI : 10.1007/s11242-009-9340-2

Éditeur(s) : HAL CCSD Ecological Society of America
Résumé : CABI:20153174020
Understanding how plants are constructed - i.e., how key size dimensions and the amount of mass invested in different tissues varies among individuals - is essential for modeling plant growth, carbon stocks, and energy fluxes in the terrestrial biosphere. Allocation patterns can differ through ontogeny, but also among coexisting species and among species adapted to different environments. While a variety of models dealing with biomass allocation exist, we lack a synthetic understanding of the underlying processes. This is partly due to the lack of suitable data sets for validating and parameterizing models. To that end, we present the Biomass And Allometry Database (BAAD) for woody plants. The BAAD contains 259634 measurements collected in 176 different studies, from 21084 individuals across 678 species. Most of these data come from existing publications. However, raw data were rarely made public at the time of publication. Thus, the BAAD contains data from different studies, transformed into standard units and variable names. The transformations were achieved using a common workflow for all raw data files. Other features that distinguish the BAAD are: (i) measurements were for individual plants rather than stand averages; (ii) individuals spanning a range of sizes were measured; (iii) plants from 0.01-100 m in height were included; and (iv) biomass was estimated directly, i.e., not indirectly via allometric equations (except in very large trees where biomass was estimated from detailed sub-sampling). We included both wild and artificially grown plants. The data set contains the following size metrics: total leaf area; area of stem cross-section including sapwood, heartwood, and bark; height of plant and crown base, crown area, and surface area; and the dry mass of leaf, stem, branches, sapwood, heartwood, bark, coarse roots, and fine root tissues. We also report other properties of individuals (age, leaf size, leaf mass per area, wood density, nitrogen content of leaves and wood), as well as information about the growing environment (location, light, experimental treatment, vegetation type) where available. It is our hope that making these data available will improve our ability to understand plant growth, ecosystem dynamics, and carbon cycling in the world's vegetation.
ISSN: 0012-9658

hal-01535227
https://hal.archives-ouvertes.fr/hal-01535227
DOI : 10.1890/14-1889.1
PRODINRA : 306122

Éditeur(s) : HAL CCSD Royal Society of Chemistry
Résumé : International audience
A full equilibrium treatment of molecular aggregation is presented for prototypes of 1D and 3D aggregates, with and without nucleation. By skipping complex kinetic parameters like aggregate size-dependent diffusion, the equilibrium treatment allows to predict directly time-independent quantities such as critical concentrations. The relationships between the macroscopic equilibrium constants for the different paths are first established by statistical corrections and so as to comply with the detailed balance constraints imposed by nucleation, and the composition of the mixture resulting from homogeneous aggregation is then analyzed using the polylogarithm function. Several critical concentrations are distinguished: the residual monomer concentation in equilibrium (RMC) and the critical nucleation concentration (CNC), that is the threshold concentration of total subunits necessary for initiating aggregation. When increasing the concentration of total subunits, the RMC converges more strongly to its asymptotic value, the equilibrium constant of depolymerization, for 3D aggregates and in case of nucleation. The CNC moderately depends on the number of subunits in the nucleus, but sharply increases with the difference between the equilibrium constants of polymerization and nucleation. As the RMC and CNC can be numerically but not analytically determined, ansatz equations connecting them to thermodynamic parameters are proposed
PCCP : Physical chemistry chemical physics

Droits : info:eu-repo/semantics/OpenAccess
hal-01565995
https://hal.archives-ouvertes.fr/hal-01565995
https://hal.archives-ouvertes.fr/hal-01565995/document
https://hal.archives-ouvertes.fr/hal-01565995/file/Aggregates_in_equilibrium.pdf
DOI : 10.1039/c6cp08369b

Éditeur(s) : HAL CCSD
Résumé : The purpose of this work is to specify the deformation offshore East of Taiwan by characterizing major active faults in particular at the level of the Ryukyu forearc. The major problem associated with the study of this region is that earthquakes are located outside the permanent networks. Consequently, this led to some unprecise earthquake locations limiting tectonic and statistical analyses, and therefore the correct estimation of the seismic hazard. This work is included in the project ANR ACTS (Active Tectonics and Seismic Hazard in Taiwan). To achieve this goal, we worked on three different timescales for which a different localization method has been proposed to obtain a clear image of seismic deformation and highlight major faults offhore East of Taiwan. First, at the scale of the century (from the analysis of a seismicity catalogue with homogeneous magnitude), the instrumental historical earthquakes (1897-2007) show that the Ryukyu margin was affected by 6 earthquakes of magnitude greater than 7 with 4 of them for which the responsible fault is unknown. We propose a method of relative location to relocate the historic events from the time difference of P and S arrival times (Ts-Tp) at each station. The location is obtained by searching for "analogue" earthquakes in the recent instrumental catalogue (1991-2008) for which Ts-Tp at each station is close. This method has been applied to the largest (in terms of magnitude) earthquake ever recorded in Taiwan, the earthquake of June 5, 1920 (M7.7 +/- 0.2). A rupture along the interplate of the Ryukyu subduction with a possible nucleation at the downdip limit of a splay-fault is certainly responsible of this earthquake. Then, at the scale of the decade, the improvement of the method of absolute location based on MAXimum of Intersection of EDT (MAXI, EDT: Equal Differential Time) allows to better extract the erroneous arrival times and prevents the "trade-off" between depth and origin time, and between depth and epicentral position when the azimuthal coverage is low (gap Azimuthal > 180degre). Synthetic tests show the effectiveness of MAXI (using P-wave only) to determine the parameters x, y and z even when the azimuthal gap is important. In the latter case, the quality of the results is dependent on the velocity model to represent the 3D structure of the Earth. We propose an approach involving the use of a 3D a priori P-wave velocity model to locate earthquakes which are lateral and remote to the seismic network. An application to the case of Taiwan and Ecuador validates this approach. Finally, at the level of a few months, the marine geophysical campaign RATS (Ryukyu Arc: Tectonics and Seismology) was conducted in two stages. A passive seismology experiment from July to October, 2008 (RATS1) has been conducted over the forearc of the Ryukyus and then active seismic experiment (refraction and reflection) was conducted in May 2009 in a NNE - SSW line through the Ryukyu margin. These two combined experiments allow improving our knowledge about the crustal structure of the margin. At the level of the forearc, the basement of the forearc is characterized by vertical backstop and a very deformed basis certainly associated with a significant out of sequence deformation. In depth, the downgoing plate is certainly affected by a tear that controls the seismicity in the region of transition between the subduction and collision.
Le but de ce travail est de préciser la déformation en mer à l'est de Taïwan et de notamment caractériser les failles actives majeures en particulier au niveau de l'avant-arc des Ryukyus. Le problème majeur associé à l'étude de cette région est que les séismes sont localisés en dehors des réseaux permanents et que cela conduit à des localisations peu précises limitant les analyses statistiques, tectoniques et donc l'estimation correcte de l'aléa sismique. Ce travail est inclus dans le projet ANR ACTS (Active Tectonics and Seismic Hazard in Taiwan). Pour atteindre cet objectif, nous travaillons à trois échelles de temps différentes pour lesquelles une méthode de localisation différente a été proposée pour obtenir une image précise de la déformation sismique et mettre en évidence les failles majeures en mer à l'est de Taïwan. D'abord, à l'échelle du siècle (à partir de l'analyse d'un catalogue de sismicité homogène en magnitude), les séismes historiques instrumentaux (1897-2007) montrent que la marge des Ryukyus a été affectée par 6 séismes de magnitude supérieure à 7 dont 4 pour lesquels la faille responsable n'est pas connue. Nous proposons une méthode de localisation relative qui permet de relocaliser les évènements historiques à partir des différences de temps d'arrivées P et S (Ts-Tp) à chaque station. La localisation est obtenue en recherchant les séismes analogues dans le catalogue instrumental récent (1991-2008) pour lesquels Ts-Tp à chaque station est proche. Cette méthode a été appliquée au plus gros séisme (en terme de magnitude) jamais enregistré à Taïwan, le séisme du 5 juin 1920 (M7.7 $pm$ 0.2). Ce séisme a certainement pour origine une rupture sur l'interplaque sismogène de la subduction des Ryukyus avec une possible nucléation à la base d'une faille hors-séquence. Ensuite, à l'échelle de la dizaine d'années, l'amélioration de la méthode de localisation absolue du MAXimum d'Intersection EDT (MAXI, EDT: Equal Differential Time) permet de mieux extraire les temps d'arrivées erronés et empêche les "trade-off" entre profondeur et temps d'origine et, entre profondeur et position épicentrale lorsque la couverture azimutale est faible (gap azimutal > 180°). Des tests synthétiques montrent l'efficacité de MAXI (en utilisant les ondes P uniquement) à déterminer les paramètres x, y et z même lorsque le gap azimutal est important. Dans ce dernier cas, la qualité des résultats reste dépendant du modèle de vitesse à représenter la structure 3D de la Terre. Nous proposons une démarche associant l'utilisation d'un modèle de vitesse des ondes P 3D a priori avec la méthode MAXI pour localiser les séismes qui sont latéraux et éloignés du réseau. Une application au cas de Taïwan et en Équateur valide cette approche. Enfin, à l'échelle de quelques mois, la campagne de géophysique marine RATS (Ryukyu Arc: Tectonics and Seismology) a été menée en deux temps. Une expérience de sismologie passive de juillet à octobre 2008 (RATS1) a été menée au-dessus de l'avant-arc des Ryukyus puis une expérience de sismique active (réfraction et réflexion) a été menée en mai 2009 sur une ligne NNE-SSW à travers la marge des Ryukyus. Ces deux expériences combinées permettent d'améliorer notre connaissance de la structure crustale de la marge. Au niveau de l'avant-arc, le socle de l'avant-arc est caractérisé par une extrémité formant un butoir vertical et une base très déformée certainement associée à une importante déformation hors-séquence. En profondeur, la plaque plongeante est certainement affectée par une déchirure qui contrôle la sismicité dans cette région de transition entre la subduction et la collision.
https://tel.archives-ouvertes.fr/tel-00660737

tel-00660737
https://tel.archives-ouvertes.fr/tel-00660737
https://tel.archives-ouvertes.fr/tel-00660737/document
https://tel.archives-ouvertes.fr/tel-00660737/file/Thesis_small.pdf

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Demographic processes and spatial dispersal of Triatoma dimidiata, a triatomine species vector of Chagas disease, are modeled by integrodifference equations to estimate invasion capacity of this species under different ecological conditions. The application of the theory of orthogonal polynomials and the steepest descent method applied to these equations, allow a good approximation of the abundance of the adult female population and the invasion speed. We show that: (1) under the same mean conditions of demography and dispersal, periodic spatial dispersal results in an invasion speed 2.5 times larger than the invasion speed when spatial dispersal is continuous; (2) when the invasion speed of periodic spatial dispersal is correlated to adverse demographic conditions, it is 34.7% higher as compared to a periodic dispersal that is correlated to good demographic conditions. From our results we conclude, in terms of triatomine population control, that the invasive success of T. dimidiata may be most sensitive to the probability of transition from juvenile to adult stage. We discuss our main theoretical predictions in the light of observed data in different triatomines species found in the literature.
ISSN: 0022-5193

hal-01298098
https://hal-univ-perp.archives-ouvertes.fr/hal-01298098
DOI : 10.1016/j.jtbi.2016.01.017

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The oxygen fugacity and therefore the iron redox state of a melt is known to have a strong influence on the liquid line of descent of magmas and thus on the composition of the coexisting melts and crystals. We present a new method to estimate this critical parameter from electron probe microanalyses of two of the most common minerals of basaltic series, plagioclase and clinopyroxene. This method is not based on stoichiometric calculations, but on the different partitioning behaviour of Fe3+ and Fe2+ between both minerals and a melt phase: plagioclase can incorporate more Fe3+ than Fe2+, while clinopyroxene can incorporate more Fe2+ than Fe3+. For example, the effect of oxidizing a partly molten basaltic system (Fe3+ is stabilized with respect to Fe2+) results in an increase of FeOtotal in plagioclase, but a decrease in the associated clinopyroxene. We propose an equation, based on published partition coefficients, that allows estimating the redox state of a melt from these considerations. An application to a set of experimental and natural data attests the validity of the proposed model. The associated error can be calculated and is on average <1 log unit of the prevailing oxygen fugacity.;In order to reduce the number of different variables influencing the Fe2+/Fe3+ mineral/melt equilibrium, our model is restricted to basaltic series with SiO2<60% that have crystallized at intermediate to low pressure (<0.5 GPa) and under relatively oxidizing conditions (Delta FMQ>0; where FMQ is the fayalite-magnetite-quartz oxygen buffer equilibrium), but it may be parameterized for other conditions. A spreadsheet is provided to assist the use of equations, and to perform the error propagation analysis.
ISSN: 0377-0273

hal-00475550
https://hal.archives-ouvertes.fr/hal-00475550
DOI : 10.1016/j.jvolgeores.2009.11.023

Éditeur(s) : Public Library Science
Résumé : The blue mussel, Mytilus edulis, is a commercially important species, with production based on both fisheries and aquaculture. Dynamic Energy Budget (DEB) models have been extensively applied to study its energetics but such applications require a deep understanding of its nutrition, from filtration to assimilation. Being filter feeders, mussels show multiple responses to temporal fluctuations in their food and environment, raising questions that can be investigated by modeling. To provide a better insight into mussel–environment interactions, an experiment was conducted in one of the main French growing zones (Utah Beach, Normandy). Mussel growth was monitored monthly for 18 months, with a large number of environmental descriptors measured in parallel. Food proxies such as chlorophyll a, particulate organic carbon and phytoplankton were also sampled, in addition to non-nutritious particles. High-frequency physical data recording (e.g., water temperature, immersion duration) completed the habitat description. Measures revealed an increase in dry flesh mass during the first year, followed by a high mass loss, which could not be completely explained by the DEB model using raw external signals. We propose two methods that reconstruct food from shell length and dry flesh mass variations. The former depends on the inversion of the growth equation while the latter is based on iterative simulations. Assemblages of food proxies are then related to reconstructed food input, with a special focus on plankton species. A characteristic contribution is attributed to these sources to estimate nutritional values for mussels. M. edulis shows no preference between most plankton life history traits. Selection is based on the size of the ingested particles, which is modified by the volume and social behavior of plankton species. This finding reveals the importance of diet diversity and both passive and active selections, and confirms the need to adjust DEB models to different populations and sites.
Plos One (1932-6203) (Public Library Science), 2014-10 , Vol. 9 , N. 10 , P. 1-13

Droits : 2014 Picoche et al. This is an open-access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited
http://archimer.ifremer.fr/doc/00218/32895/31380.pdf
http://archimer.ifremer.fr/doc/00218/32895/31381.pdf
http://archimer.ifremer.fr/doc/00218/32895/31382.pdf
http://archimer.ifremer.fr/doc/00218/32895/31383.pdf
http://archimer.ifremer.fr/doc/00218/32895/31384.pdf

Éditeur(s) : HAL CCSD
Résumé : In this thesis, we propose a method to solve some Cauchy problems with irregular or characteristic data by using the recent theories of generalized functions. We study a regular Cauchy problem and a regular Goursat problem in the first part with data on a monotonic curve. The second part is devoted to the setting up of an algebra adapted to the generalized Cauchy problem. In the third part, we give a meaning to a generalized Cauchy problem and we show that the problem admits a unique solution. We study a generalized Goursat problem in the same way. In the fourth part, we approach a characteristic Cauchy problem by a family of non-characteristic ones. The family of solutions is a representative of a generalized function we consider as the generalized solution of the problem in an appropriate algebra. We give a meaning to the characteristic Cauchy problem with irregular data by replacing it by a family of non-characteristic problems in an appropriate biparametric algebra. The first parameter permits to replace the given problem by a non-characteristic one, whereas the second parameter makes it regular. The family of solutions is a representative of a generalized function considered as the solution of the problem.
Dans cette thèse nous proposons une méthode pour résoudre certains problèmes de Cauchy à données irrégulières ou caractéristiques en utilisant les récentes théories des fonctions généralisées. Nous étudions dans la première partie un problème de Cauchy et un problème de Goursat réguliers avec des données sur une courbe monotone. La deuxième partie est consacrée à la mise en place d'une algèbre adaptée à la résolution du problème de Cauchy généralisé. Dans la troisième partie nous donnons un sens à un problème de Cauchy généralisé et nous montrons qu'il admet une unique solution. Nous étudions de même un problème de Goursat généralisé. Dans la quatrième partie nous approchons un problème de Cauchy caractéristique par une famille de problèmes non caractéristiques. La famille de solutions est un représentant d'une fonction généralisée que nous considérons comme la solution généralisée du problème dans une algèbre appropriée. Nous donnons un sens au problème de Cauchy caractéristique dans le cas de données irrégulières en le remplaçant par une famille de problèmes non caractéristiques dans une algèbre convenable dépendant de deux paramètres. Le premier paramètre permet de se ramener à un problème non caractéristique que le second rend régulier. La famille de solutions est un représentant d'une fonction généralisée que nous considérons comme la solution du problème.
https://tel.archives-ouvertes.fr/tel-00012098

Droits : info:eu-repo/semantics/OpenAccess
tel-00012098
https://tel.archives-ouvertes.fr/tel-00012098
https://tel.archives-ouvertes.fr/tel-00012098v2/document
https://tel.archives-ouvertes.fr/tel-00012098/file/These-Devoue-29-12-2006.pdf

Éditeur(s) : HAL CCSD Public Library of Science
Résumé : International audience
Various types of genome and gene similarity networks along with their characteristics have been increasingly used for retracing different kinds of evolutionary and ecological relationships. Here, we present a new polynomial time algorithm and the corresponding software (BRIDES) to provide characterization of different types of paths existing in evolving (or augmented) similarity networks under the constraint that such paths contain at least one node that was not present in the original network. These different paths are denoted as Breakthroughs , Roadblocks, Impasses, Detours, Equal paths, and Shortcuts. The analysis of their distribution can allow discriminating among different evolutionary hypotheses concerning genomes or genes at hand. Our approach is based on an original application of the popular shortest path Dijkstra's and Yen's algorithms.
ISSN: 1932-6203

Droits : http://creativecommons.org/licenses/by/
hal-01361753
http://hal.upmc.fr/hal-01361753
http://hal.upmc.fr/hal-01361753/document
http://hal.upmc.fr/hal-01361753/file/journal.pone.0161474.PDF
DOI : 10.1371/journal.pone.0161474

Éditeur(s) : HAL CCSD Institute for Scientific Computing and Information
Résumé : International audience
The production of oil in soft highly compacted reservoirs produces a significant reduction in the pore space which in turn causes the surface to subside. The authors couple two simulators to model the mechanical deformations in the presence of a Darcy flow, both one- and two-phase. The simulators solve for flow in a porous medium using a finite volume method, and solve for the mechanical deformation of the porous media using a finite element method. The flow equations and the deformation equations are coupled using Biot's law. The authors use two different methods for the coupling: the first uses a staggered algorithm; the second is based on a preconditioned conjugate method. The authors use a multiscale method in both approaches. The authors show that the inf-sup condition is not satisfied, because of the mixed discretization which is done by using two separate simulators. The authors give convergence comparisons for the two methods for several examples. Two of the examples are for the linear problem (one-phase) where they know the exact solution and one is for the nonlinear problem (two-phase). In all cases, the preconditioned conjugate algorithm is faster and more robust, in particular when the inf-sup condition is not satisfied. In the nonlinear problem the authors state that the results agree with physical predictions but do not give actual empirical data. Finally, they show the effects of grid orientation on the nonlinear problem.
ISSN: 1705-5105

hal-00730673
https://hal.archives-ouvertes.fr/hal-00730673

Éditeur(s) : HAL CCSD
Résumé : Climate change is one of the biggest public health threats in the 21th century. An increase in temperatures will lead to an increase in mortality attributable to temperature. In addition, some populations and territories are particularly vulnerable to the impact of increases in heat. It is thus necessary to identify these populations and territories as well as examine future heat-Related health impacts in order to recommend equity-Oriented policies today and in the future. The general objective of this thesis is to document current and future heat-Related vulnerability factors in the context of climate change. In order to address this general objective, the thesis involved four components: a) to conduct a systematic review and a meta-Analysis to assess the heterogeneity in the heat-Mortality associations with respect to individual and contextual population characteristics; b) to identify whether and how the magnitude of mean temperature effects on all-Cause mortality were modified by chronic air pollution exposure, social deprivation, and a combination of these two dimensions; c) to develop a method to quantify the climate change impacts on heat-Related mortality using climate modeling; d) to assess historical and future social disparities in years of life lost caused by ambient temperature in Montreal and Paris, and compare these estimates as well as the impact of climate change on social disparities between the two cities. This thesis highlights which populations are more vulnerable to heat and shows that several differences exist with regard to guidelines from international public health institutions for the identification of vulnerable populations. This thesis also identified chronic air pollution exposure as a new vulnerability factor in heat-Related mortality and that it has a double interaction with social deprivation. Furthermore, in this thesis a novel method to quantify future heat-Related mortality was developed which emphasized the strong evidence of an increase in heat-Related mortality under climate change. This method was then applied to estimate the increase in daily years of life lost social disparities in both Montreal and Paris under climate change which showed that this increase would be greater in Montreal compared to Paris in the future. Thus, this thesis which used a variety of epidemiologic methods has clarified which populations are particularly vulnerable to heat impacts and challenges guidelines for the identification of vulnerable populations from international public health institutions. It has also highlighted the climate change impacts on health inequalities and aims to reorient equity-Focused policies.
Les changements climatiques constituent l’un des enjeux les plus importants en santé publique du XXIème siècle. En effet, une hausse des températures provoquera une hausse de la mortalité attribuable à la chaleur. En outre, certaines populations et territoires sont particulièrement vulnérables aux effets de la chaleur. Il est donc nécessaire de les identifier clairement ainsi que les impacts futurs pour orienter avec équité les politiques publiques aujourd’hui et à l’avenir. L’objectif de cette thèse est de documenter les facteurs de vulnérabilité à la chaleur dans le présent et les éléments permettant leur prise en compte pour l’avenir dans le contexte des changements climatiques. Quatre étapes ont été menées pour répondre à cet objectif : a) Mener une revue systématique et une méta-Analyse des facteurs de vulnérabilité face aux risques de mortalité en lien avec la chaleur ; b) Analyser si l’exposition chronique à la pollution atmosphérique modifie la relation entre la chaleur et la mortalité dans un contexte urbain (Paris) et explorer la double interaction avec la défaveur sociale ; c) Développer une méthode de quantification des impacts liés à la chaleur en lien avec les changements climatiques en intégrant une grande diversité de simulations climatiques ; d) Estimer les inégalités d’années de vies perdues attribuables à la chaleur et leurs projections futures dans deux contextes distincts (Montréal et Paris) et comparer ces inégalités. Cette thèse a permis de mettre en évidence sur la base de la littérature épidémiologique les groupes de population qui sont les plus vulnérables face aux effets de la chaleur et de montrer qu’il y a plusieurs divergences par rapport aux recommandations émises par les institutions de santé publique vis-À-Vis de l’identification de populations vulnérables. Cette thèse a permis également d’identifier l’exposition chronique à la pollution atmosphérique comme nouveau facteur de vulnérabilité à la chaleur et que cette vulnérabilité était encore plus prononcée lorsqu’il s’agissait de populations défavorisées socialement. Puis, une méthode permettant de quantifier l’impact des changements climatiques sur les décès attribuables à la chaleur et ses sources d’incertitudes a été développée, et a permis de mettre en évidence que la probabilité que les changements climatiques conduisent à une augmentation de la mortalité en lien avec la chaleur est très forte. Cette méthode a ensuite été utilisée pour estimer que l’augmentation de la température conduira à une augmentation des inégalités sociales d’années de vie perdues à la fois à Montréal et à Paris, l’effet des changements climatiques sur l’accroissement de ces inégalités étant plus fort à Montréal qu’à Paris. Cette thèse, en se basant sur diverses méthodes épidémiologiques, a permis dans l’ensemble de clarifier quelles populations étaient particulièrement à risque face aux effets de la chaleur et de questionner les recommandations émises par les organismes tels que l’OMS. Elle a également permis de montrer l’effet des changements climatiques sur l’évolution de vulnérabilités face à la chaleur pour inciter dès aujourd’hui la mise en place de politiques publiques équitables et limiter l’impact des changements climatiques sur l’accroissement des inégalités de santé.
https://tel.archives-ouvertes.fr/tel-01456772

Droits : info:eu-repo/semantics/OpenAccess
NNT : 2015PA11T003
tel-01456772
https://tel.archives-ouvertes.fr/tel-01456772
https://tel.archives-ouvertes.fr/tel-01456772/document
https://tel.archives-ouvertes.fr/tel-01456772/file/VA_BENMARHNIA_TARIK_05022015.pdf

Éditeur(s) : HAL CCSD
Résumé : International audience
This paper deals with variational inclusions of the form 0 ∈ K − f(x) − g(x) where f is a smooth function from a reflexive Banach space X into a Banach space Y , g is a function from X into Y admitting divided differences and K is a nonempty closed convex cone in the space Y . We show that the previous problem can be solved by a combination of two methods: the Newton and the Secant methods. We show that the order of the semilocal method obtained is equal to (1 + √5)/2. Numerical results are also given to illustrate the convergence at the end of the paper.
Serdica Math. J.

hal-00924150
https://hal.archives-ouvertes.fr/hal-00924150

Éditeur(s) : HAL CCSD Global Science Press
Résumé : International audience
In this paper, the authors present two different time-discretization schemes combined with a finite-volume space discretization for the incompressible Navier-Stokes equations. They show that the collocated space discretization, usually used with a projection method, can also be extended to other time discretizations over previous projection methods, like the splitting methods. The main advantage of this splitting method is that the pressure approximation is truly of second order. In the first and second parts of this article, two different time-discretization schemes are considered with a collocated space discretization and it is explained how the unknown can be correctly coupled. Numerical simulations are presented in the last part. Tests of spatial and time accuracies are made. The numerical results when the Navier-Stokes problem is solved are shown, in the model problem of the driven cavity.
ISSN: 1815-2406

hal-00730191
https://hal.archives-ouvertes.fr/hal-00730191