Éditeur(s) : HAL CCSD
Résumé : International audience
Tin mineralization in Achmmach deposit (NE of Moroccan Central Massif) is associated with tourmaline-rich alteration halos and faults, within N70 shear zones, hosted in sandstones and metapelites of the Upper Visean-Namurian. Such deposits were reported as late-Variscan in age and related to the emplacement of late orogenic granite not outcropping in the studied area.From field constraints, it appears that the late Variscan phase is marked by a transition from transpression to extension with conditions of deformation evolving from ductile to brittle environments. During the transpressive phase (horizontal shortening direction roughly trending E-W), pervasive tourmaline is deposited under the form of metasomatic halos around fractures in the upper levels relative to the deep batholith. This hydrothermal activity is coeval with ductile shear zones within a large corridors trending N70. Tourmaline-rich alteration appears as a hardening stage contributing to the modification of the tectonic style of rocks. Thereafter, a strong brecciation occurs in response of re-using and re-opening of the strike-slip structure. The result is (1) the formation of dextral (N070, N020) and sinistral (N120) shears, and (2) the circulation of fluids within early tourmalinites and formation of tourmaline-rich breccia. Subsequently, during the late orogenic extensional phase, tourmalinite breccias reopened as normal faults acting as overpressure fluid pathways for developing other breccias and veins. Such event is marked by deposition of tin mineralization i.e., cassiterite followed by sulphides, and then fluorite and carbonates at the end.From analysis of the shear-zone structure and superimposition of tourmalines and tin mineralization in the same structures, it is possible to suggest a structural control continuum. Such control is well expressed during metasomatism and deposition of hydrothermal tourmaline under the transpressive phase. Thereafter, under the extensive phase allowing open-space, tin-mineralization were trapped.This study has been supported by AI MA/09/210
24ème RST
Pau, France

insu-01546927
https://hal-insu.archives-ouvertes.fr/insu-01546927

Éditeur(s) : HAL CCSD Wiley-Blackwell
Résumé : International audience
Physical modeling of oblique subduction is performed to study the mechanism of strain partitioning. The model is two-layer and includes the elasto-plastic lithosphere (the overriding and subducting plates) and the low-viscosity liquid asthenosphere. The subduction is driven by a push force from a piston and a pull force when the density contrast Ap between the subducting plate and the asthenosphere is positive. We vary both Ap and the interplate friction (frictional stresses). Slip partitioning is obtained only in the models with high interplate friction and only when the overriding plate contains a weak zone. This zone in the models corresponds either to locally thinned litho-sphere or to cut (fault). The horizontal, trench-normal component of the interplate friction force [Ffh[ can be comparable with the absolute value of the horizontal component of the nonhydrostatic interplate pressure force [Fph [ in the subduction zone. Ffh is always negative (compression), while Fph can be either negative (compressional subduction regime) or positive (extensional regime). High friction, which promotes partitioning, can completely cancel the extensional (suction) force Fph. Back arc tension and strike-slip faulting appear thus as conflicting processes, although they can coexist in the same subduction zone, depending on the relative values of relevant forces. It appears that high friction can exist only in compressional subduction zones where partitioning should develop more easily. This conclusion is supported by the comparison of two oblique subduction zones, having similar geometry: the compressional southern Kurile zone (strong partitioning) and extensional southern Ryukyu zone (no lithospheric-scale partitioning). Other factors controlling the strain partitioning are the length of the oblique subductlon zone, the boundary conditions at the transverse limits of the forearc sliver, and of course, the obliquity of subduction.
ISSN: 2169-9275

hal-01261396
https://hal.archives-ouvertes.fr/hal-01261396
https://hal.archives-ouvertes.fr/hal-01261396/document
https://hal.archives-ouvertes.fr/hal-01261396/file/chemendaJGR2000.pdf
DOI : 10.1029/1999JB900332

Éditeur(s) : HAL CCSD Société géologique de France
Résumé : International audience
In this paper, we provide the first structural map of Les Saintes archipelago (Guadeloupe, Lesser Antilles). The finite strain pattern displays four families of fault systems characterized by their statistical structural orientations: N000-N020, N050-N070, N090-N110 and N130-N140 trending fault systems. Our onshore results thus underline a fault network much more complex than the one depicted by the previous offshore geophysical investigations around Les Saintes archipelago, which show only N120-N150 trending system. According to the available K-Ar dating of the volcanic rocks and the relative chronology of the faults defined in the field, we determine the deformation history in Les Saintes islands since the last 3 Ma. The four highlighted trending fault systems are already active since the Pliocene and are consistent with the present-day extensional tectonics in the Guadeloupe archipelago compatible with the reactiva-tion of inherited structures at the active arc scale. We interpret the tectonic evolution of Les Saintes islands as the result of interplay between subduction of aseismic ridges (Tiburon and Barracuda ridges) and oblique convergence. Furthermore , we recognized an exhumed geothermal paleo-system in Terre-de-Haut island which is a good analogue of the present-day active Bouillante geothermal system. Its duration is estimated at 400 k.y. during the Pliocene.
EISSN: 1777-5817

hal-01625778
https://hal.univ-antilles.fr/hal-01625778
https://hal.univ-antilles.fr/hal-01625778/document
https://hal.univ-antilles.fr/hal-01625778/file/VeratIEtAl_Final.pdf
DOI : 10.2113/gssgfbull.187.1.3

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
The Yakutat-St. Elias collision in SE Alaska and adjacent Canada represents a prime example of present-day tectonics associated with an indentor corner. Its eastern syntaxis is marked by high exhumation, a sharp structural bend, and strain concentration at the transition from shortening to oblique transpression. Here we present GPS velocity and strain rate fields that cover the syntaxis, including 11 new stations in the core of the St. Elias Mountains. These data are corrected for transient deformation (glacial isostatic adjustment and postseismic and interseismic loading) to produce residual velocities and strain rates representative of long-term tectonics. The main features of these velocity and strain rate fields are a peak in strain rates (strain knot) in the syntaxis at the junction between the main fault systems and a rapid rotation from convergence-parallel to convergence-normal orientations of the velocities and shortening axes around the syntaxis, leading to shortening across the southern Denali Fault. These features are consistent with the strain and tectonic patterns expected near an indentor corner at the transition from shortening to transpression, with a combination of diffuse and localized deformation. The GPS velocities and strain rates show diffuse deformation around the syntaxis, from pure convergence-parallel shortening in the orogenic wedge to oblique extension that accommodates the strain rotation at the front of the syntaxis. This indentor-corner model also results in a near-zero strike-slip rate on the southern Denali Fault and shows no clear evidence for a throughgoing fault hypothesized to link the Fairweather and Totschunda Faults.
ISSN: 0148-0227

hal-01243510
https://hal.archives-ouvertes.fr/hal-01243510
DOI : 10.1002/2014JB011842

Éditeur(s) : HAL CCSD American Geophysical Union (AGU)
Résumé : Zircon and apatite fission track (ZFT and AFT) and (U-Th)/He, ;40;Ar/;39;Ar hornblende, and U-Pb zircon ages from the granites of Tinos Island in the Aegean Sea, Greece, suggest, together with published ZFT data, that there are three extensional detachments on Tinos. The Tinos granites crosscut the Tinos detachment. Cooling of the granites was controlled by the Livadi detachment, which occurs structurally above the Tinos detachment. Our U-Pb zircon age is 14.6 ± 0.2 Ma and two ;40;Ar/;39;Ar hornblende ages are 14.4 ± 0.4 and 13.7 ± 0.4 Ma. ZFT and AFT ages go from 14.4 ± 1.2 to 12.2 ± 1.0 Ma and 12.8 ± 2.4 to 11.9 ± 2.0 Ma. (U-Th)/He ages are from 10.4 ± 0.2 to 9.9 ± 0.2 Ma (zircon) and 11.9 ± 0.5 to 10.0 ± 0.3 Ma (apatite). All ages decrease northeastward in the direction of hanging wall transport on the Livadi detachment and age-distance relationships yield a slip rate of 2.6 (+3.3 / −1.0) km Ma;−1;. This rate is smaller than a published slip rate of 6.5 km Ma;−1; for the Vari detachment, which is another detachment structurally above the Tinos detachment. Because of the different rates and because published ZFT ages from the footwall of the Vari detachment are ∼10 Ma, we propose that the Vari detachment has to be distinguished from the older Livadi detachment. We discuss various models of how the extensional detachments may have evolved and prefer a scenario in which the Vari detachment cut down into the footwall of the Livadi detachment successively exhuming deeper structural units. The thermochronologic ages demonstrate the importance of quantitative data for constraining localization processes during extensional deformation.
ISSN: 0278-7407

hal-00407638
https://hal.archives-ouvertes.fr/hal-00407638
DOI : 10.1029/2006TC001969

Éditeur(s) : HAL CCSD
Résumé : International audience
Two opposing visions of the Aegean backarc tectonics implicitly contain contrasting images of the rheological behaviour of the lihosphere, supported by different sets of observations. The propagation of the NAF and extension in the Corinth Rift suggest a strongly localising rheology whereas the formation of MCC in the Cyclades and the Rhodope suggests instead a more viscous behaviour. This paradox was the seminal question addressed by the ANR-EGEO programme (2007-2010) that leads to the following conclusions: (1) The exhumation of the Cycladic MCC's is accommodated by the N-dipping North Cycladic Detachment System (NCDS) that partly reworks the Vardar suture and at the base by a series of thrusts, including the basal contact of the Cycladic Blueschists (CBS) over the Cycladic Basement (CB). The activity of LANF is due to the reactivation of pre-existing discontinuities such as thrusts or earlier detachments and much less to the interaction with granitic plutons. (2) Exhumation in the Cyclades has proceeded in two stages: (a) Eocene syn-orogenic exhumation within the subduction lower/upperplate interface while the post-orogenic Rhodope MCC formed further north, (b) Oligo-Miocene post-orogenic extension in an MCC mode coeval with syn-orogenic exhumation in Crete and the Peloponnese. (3) Both stages were associated with slab retreat, as early as the Eocene with an acceleration at 30-35 Ma. (4) The localisation of the presently active steeply-dipping normal faults on the southern margin of the Corinth Rift may have been preceded by a partial reworking of thrusts and syn-orogenic detachments by shallow-dipping decollements. (5) The localisation of the NAF in the Marmara Sea region and the Northern Aegean Sea is now accurately dated between 5.3 and 5 Ma Ma using the erosion and deposition surfaces that mark the Messinian salinity Crisis and nannofossils ages. (6) The formation of MCCs in the Cyclades resulted in the draining of the low viscosity lower crust from the northern Aegean Sea and led to an easier coupling between upper mantle and upper crust, easing the localisation and propagation of the NAF. (7) A comparison between crustal and mantle finite strain suggests that mantle flow due to slab retreat controls the stretching of the crust. Our model involves progressive slab retreat and mantle flow below the overriding plate inducing the observed succession of tectonic episodes with a progressive localisation of extension due to several slab tearing events. There is no paradox in the tectonic history and rheological behaviour of the Aegean lithosphere but an evolution of the kinematic boundary conditions due to slab deformation at depth.
American Geophysical Union
San Francisco, United States

insu-00860518
https://hal-insu.archives-ouvertes.fr/insu-00860518
BIBCODE : 2010AGUFM.T13G..04J

Éditeur(s) : HAL CCSD SpringerOpen
Résumé : The Karakorum Fault zone (KFZ) plays an important role in understanding the formation, evolvement and deformation of the Tibetan Plateau. The high-T dextral shearing metamorphic rocks, e.g., mylonites or mylonitized gneisses-granites, locally crop out along the southeastern part of the KFZ in the Ayila Ri'gyü Range area. The SHRIMP U-Pb dating of the syn-kinematic crystallized zircons indicates that the initial age of the KFZ is ∼27 Ma, ∼10 Ma older than previous results. The extensive high-T dextral shearing along the KFZ started at least at 27–20 Ma, accompanied by the syn-kinematic emplacement of leuco-granites. Deformation and concomitant fluid circulation during shearing most likely occurred as early as at 25–13 Ma. The KFZ probably grew from southeast to northwest along the fault as a result of continuous convergence between the India plate and Eurasia plate.
ISSN: 1001-6538

hal-00406402
https://hal.archives-ouvertes.fr/hal-00406402
DOI : 10.1007/s11434-007-0164-6

Éditeur(s) : HAL CCSD American Geophysical Union (AGU)
Résumé : International audience
The current structure of the South Armorican Domain in the French Variscan Belt, provides an excellent record of the late orogenic evolution, as documented by the complex interactions between extensional structures and partial melting. In the Golfe du Morbihan, the South Brittany Migmatite Belt (SBMB), tectonically overlain by non-melted metamorphic units, was studied by combined structural and 40Ar/39Ar methods. The recognition of successive deformation stages points to a strain continuum initiated at depth at the end of a partial melting event, and continued to near-surface brittle faulting, encompassing ductile strain localization over a major top-to-the-ESE extensional shear zone (SSZ) consistent with an overall WNW-ESE orogen-parallel stretching. This multidisciplinary study making the link between structure, texture, microchemistry and 40Ar/39Ar geochronology allow distinguishing between cooling, recrystallization and syn-tectonic crystallization ages. The first extensional insights, witnessed by dyke intrusion were dated at ~319 ± 6 Ma immediately after the SBMB partial melting. Strain localization along the SSZ, occurred until ~302-298 Ma when SBMB crossed the ductile-brittle transition. Moreover, in situ 40Ar/39Ar analysis, of syn-tectonic white micas sampled in the ductile and brittle structures yield similar ~300 Ma. Formation or reactivation of the SSZ may have occurred during the rapid cooling of the SBMB settled at ~305 Ma by conventional 40Ar/39Ar analysis. Large-scale late orogenic extensional event of the previously overthickened Variscan crust thus lasted over ~20 ± 3 Myr in the same extensional tectonic regime guided by the South Armorican Shear Zone.
ISSN: 0278-7407

insu-00628699
https://hal-insu.archives-ouvertes.fr/insu-00628699
https://hal-insu.archives-ouvertes.fr/insu-00628699/document
https://hal-insu.archives-ouvertes.fr/insu-00628699/file/2010TC002788.pdf
DOI : 10.1029/2010TC002788

Éditeur(s) : HAL CCSD
Résumé : The spreading ridge subduction is an unavoidable process during the subduction-related belt elovution. The aim of this thesis concerns the evolution of the Central Patagonian Cordillera, at the latitude of the Chile triple junction, in relation with the Chile spreading ridge subduction inducing the opening of a slab-window beneath the South American plate. By a morphologic, and a structural analysis, coupled with the analysis of satelittes and topographic images, we show the influence of the slab-window development at 3 Ma on the morphostructural evolution of the Central Patagonia. During the Pliocene, the Central Patagonian Cordillera experiences a major extensional phase inducing the formation of transverse and internal depressions. Negative tectonic inversion, responsible to the rift-type topography, induces the inversion of the morphotectonic front and the disruption of the volcano-sedimentary piedmont with the rest of the Cordillera at 3 Ma. Radial extensional regime is characterized by a magnitude comprises between 800 m and 3500 meters and vertical movements are localized along polyphazed faults. We suggest that the Plio-Quaternary morphostructural evolution is related to the opening of the slab-window at 3 Ma beneath the Central Patagonia. The upwelling of asthenospheric hot mantle through the slab window induces the regional collapse of the Central Patagonian Cordillera.
La subduction d'une dorsale active sous un continent est un processus inévitable dans l'évolution des chaînes de subduction. Le travail de cette thèse concerne l'évolution de la Cordillère de Patagonie Centrale, à la latitude du point triple du Chili, en relation avec la subduction de la dorsale active du Chili induisant le développement d'une fenêtre asthénosphérique sous la plaque sudaméricaine. A l'aide d'une approche morphologique, structurale, couplée à l'analyse d'images satellites et topographiques, nous montrons l'influence de la fenêtre asthénosphérique depuis 3 Ma sur l'évolution morphostructurale de la Patagonie Centrale. Au cours du Pliocène, la Cordillère de Patagonie Centrale est marquée par une phase d'extension majeure induisant la formation de dépressions transverses et internes à la chaîne. L'inversion négative du relief responsable de la topographie générale de type rift induit l'inversion du front morphotectonique et la déconnexion du piedmont volcano-sédimentaire du reste de la Cordillère à partir de 3 Ma. L'extension radiale dont l'amplitude est comprise entre 800 mètres et 3500 mètres, se localise dans la plupart des cas au niveau de failles polyphasées. L'évolution morphostructurale plioquaternaire proposée est directement reliée à l'ouverture de la fenêtre asthénosphérique à 3 Ma sous la Patagonie et à la remontée de matériel asthénosphérique chaud induisant la collapse régionale de la Cordillère de Patagonie Centrale.
https://tel.archives-ouvertes.fr/tel-00557618

tel-00557618
https://tel.archives-ouvertes.fr/tel-00557618
https://tel.archives-ouvertes.fr/tel-00557618/document
https://tel.archives-ouvertes.fr/tel-00557618/file/scalabrinothese.pdf

Éditeur(s) : HAL CCSD AGU and the Geochemical Society
Résumé : International audience
Continental rifts and passive continental margins show fundamental along-axis segmentation patterns that have been attributed to one or a number of different processes: extensional fault geometry, variable stretching along strike, preexisting lithospheric compositional and structural heterogeneities, oblique rifting, and the presence or absence of eruptive volcanic centers. The length and width scales of the rift stage fault-bounded basin systems change during the late evolution of the new plate boundary, and the role of magmatism may increase as rifting progresses to continental rupture. Along obliquely spreading ridges, first-order mid-ocean ridge geometries originate during the synrift stage, indicating an intimate relationship between magma production and transform fault spacing and location. The Gulf of Aden rift is a young ocean basin in which the earliest synrift to breakup structures are well exposed onshore and covered by thin sediment layers offshore. This obliquely spreading rift is considered magma-poor and has several large-offset transforms that originated during late stage rifting and control the first-order axial segmentation of the spreading ridge. Widely spaced geophysical transects of passive margins that produce only isolated 2-D images of crust and uppermost mantle structure are inadequate for evaluation of competing rift evolution models. Using closely spaced new geophysical and geological observations from the Gulf of Aden we show that rift sectors between transforms have a large internal variability over short distances (∼10 km): the ocean-continent transition (OCT) evolves from a narrow magmatic transition to wider zones where continental mantle is probably exhumed. We suggest that this small-scale variability may be explained (1) by the distribution of volcanism and (2) by the along-strike differences in time-averaged extension rate of the oblique rift system. The volcanism may be associated with (1) the long-offset Alula-Fartak Fracture Zone, which may enhance magma production on its younger side, or (2) channeled flow from the Afar plume material along the newly formed OCT and the spreading ridge. Oblique extension and/or hot spot interactions may thereby have a significant control on the styles of rifting and continental breakup and on the evolution of many magma-poor margins.
ISSN: 1525-2027

hal-00504866
https://hal.archives-ouvertes.fr/hal-00504866
https://hal.archives-ouvertes.fr/hal-00504866/document
https://hal.archives-ouvertes.fr/hal-00504866/file/G3-Leroy_al-2010.pdf
DOI : 10.1029/2009GC002963

Éditeur(s) : HAL CCSD AGU and the Geochemical Society
Résumé : International audience
Analysis of the microstructures in the km-scale mantle shear zone that separates the northern and the central parts of the Lanzo peridotite massif provides evidence of an evolution in time and space of deformation processes accommodating shearing in the shallow mantle within an extensional setting. This shear zone displays an asymmetric distribution of deformation facies. From south to north, gradual reorientation of the foliation of coarse porphyroclastic plagioclase-bearing peridotites is followed by development of protomylonites, mylonites, and mm-scale ultramylonite bands. A sharp grain size gradient marks the northern boundary. Early deformation under near-solidus conditions in the south is recorded by preservation of weakly deformed interstitial plagioclase and almost random clinopyroxene and plagioclase crystal orientations. Feedback between deformation and melt transport probably led to melt focusing and strain weakening in the shear zone. Overprint of melt-rock reaction microstructures by solid-state deformation and decrease in recrystallized grain size in the protomylonites and mylonites indicate continued deformation under decreasing temperature. Less enriched peridotite compositions and absence of ultramafic dykes or widespread melt-impregnation microstructures north of the shear zone and clinopyroxene and amphibole enrichment in the mylonites and ultramylonites suggest that the shear zone acted as both a thermal barrier and a high-permeability channel for late crystallizing fluids. These observations, together with chemical data indicating faster cooling of central Lanzo relative to the northern body, corroborate that this shear zone is a mantle detachment fault. All deformation facies have crystal preferred orientations consistent with deformation by dislocation creep with dominant activation of the (010)[100] and (100)[001] systems in olivine and orthopyroxene, respectively. Dynamic recrystallization produces dispersion of olivine CPO but not a change of dominant deformation mechanism. Evidence for activation of grain boundary sliding is limited to mm-scale ultramylonite bands, where solid-state reactions produced very fine grained polymineralic aggregates. Except for these latest stages of deformation, strain localization does not result from the microstructural evolution; the grain size decrease is a consequence of the need to deform a rock volume whose strength continuously increases because of decreasing temperature conditions. Strain localization in the intermediate levels thus essentially results from the more localizing behavior of both the deep, partially molten, and shallow parts of this extensional shear zone distribution.
ISSN: 1525-2027

hal-00644844
https://hal.archives-ouvertes.fr/hal-00644844
DOI : 10.1029/2011GC003627

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Paleostress orientations were calculated from fault populations at 24 sites along the SW-NE segment and five sites along the E-W. Yasin segment of the Karakoram-Kohistan Suture Zone in NW Pakistan They demonstrate the importance of combined thrusting and strike-slip faulting. However, several paleostress tensor directions are distinguished, a dominant NW-SE compression and a minor E-W compression are compatible with the recent evolution of this part of the Hindu Kush. From the lack of both systematic overprinting-relationships and spatial trend (the two tensors were obtained at different locations) we conclude that in each location any of these two shortening directions can dominate Heterogeneously distributed extension is found in some places and is likely due to local conditions These paleostress tensors substantiate a transpressional regime due to far-field Himalayan compression and document the long-term background of the seismogenic deformation in this region.
ISSN: 0743-9547

hal-00496459
https://hal.archives-ouvertes.fr/hal-00496459
DOI : 10.1016/j.jseaes.2010.01.004

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The identification of the structures and deformation patterns in magma-poor continental rifted margins is essential to characterize the processes of continental lithosphere necking. Brittle faults, often termed mantle detachments, are believed to play an essential role in the rifting processes that lead to mantle exhumation. However, ductile shear zones in the deep crust and mantle are rarely identified and their mechanical role remains to be established. The western Betics (Southern Spain) provides an exceptional exposure of a strongly thinned continental lithosphere, formed in a supra-subduction setting during Oligocene-Lower Miocene. A full section of the entire crust and the upper part of the mantle is investigated. Variations in crustal thickness are used to quantify crustal stretching that may reach values larger than 2000% where the ductile crust almost disappear, defining a stage of hyper-stretching. Opposite senses of shear top-to-W and top-to-E are observed in two extensional shear zones located close to the crust-mantle boundary and along the brittle-ductile transition in the crust, respectively. At locations where the ductile crust almost disappears, concordant top-to-E-NE senses of shear are observed in both upper crust and serpentinized mantle. Late high-angle normal faults with ages of ca. 21 Ma or older (40Ar/39Ar on white mica) crosscut the previously hyper-stretched domain, involving both crust and mantle in tilted blocks. The western Betics exemplifies, probably better than any previous field example, the changes in deformation processes that accommodate the progressive necking of a continental lithosphere. Three successive steps can be identified: i/a mid-crustal shear zone and a crust-mantle shear zone, acting synchronously but with opposite senses of shear, accommodate ductile crust thinning and ascent of subcontinental mantle; ii/hyper-stretching localizes in the neck, leading to an almost disappearance of the ductile crust and bringing the upper crust in contact with the subcontinental mantle, each of them with their already acquired opposite senses of shear; and iii/high-angle normal faulting, cutting through the Moho, with related block tilting, ends the full exhumation of the mantle in the zone of localized stretching. The presence of a high strength sub-Moho mantle is responsible for the change in sense of shear with depth. Whereas mantle exhumation in the western Betics occurred in a backarc setting, this deformation pattern controlled by a high-strength layer at the top of the lithosphere mantle makes it directly comparable to most passive margins whose formation lead to mantle exhumation. This unique field analogue has therefore a strong potential for the seismic interpretation of the so-called “hyper-extended margins”.
ISSN: 0264-8172

insu-01310895
https://hal-insu.archives-ouvertes.fr/insu-01310895
https://hal-insu.archives-ouvertes.fr/insu-01310895/document
https://hal-insu.archives-ouvertes.fr/insu-01310895/file/Frasca-MarPetGeol-2016.pdf
DOI : 10.1016/j.marpetgeo.2016.04.020

Éditeur(s) : HAL CCSD
Résumé : International audience
Sub-continental lithospheric mantle rocks are exhumed at the foot of magma-poor distal passive margins as aresponse to extreme stretching of the continental crust during plate separation. Remnants of the Northern Iberianpaleo-passive margin are now exposed in the North-Pyrenean Zone (NPZ) and represent field analogues to studythe processes of continental crust thinning and subcontinental mantle exhumation. The NPZ results from theinversion of basins opened between the Iberia and Europa plates during Albo-Cenomanian times. In the westernNPZ, the ‘Chaînons Béarnais’ ranges display a fold-and-thrust structure involving the Mesozoic sedimentarycover, decoupled from its continental basement and associated with peridotite bodies in tectonic contact withPalaeozoic basement lenses of small size. Continental extension developed under hot thermal conditions, asdemonstrated by the syn-metamorphic Cretaceous ductile deformation affecting both the crustal basement and theallochthonous Mesozoic cover.In this study, we present structural and geochemical data providing constraints to reconstruct the evolution ofthe northern Iberia paleo-margin. Field work confirms that the pre-rift Mesozoic cover is intimately associatedto mantle rocks and to thin tectonic lenses of crustal basement. It also shows that the pre-rift cover was detachedfrom its bedrock at the Keuper evaporites level and was welded to mantle rocks during their exhumation atthe foot of the hyper-extended margin. The crust/mantle detachment fault is a major shear zone characterizedby anastomosed shear bands defining a plurimetric phacoidal fabric at the top of the serpentinized mantle. Thedetachment is marked by a layer of metasomatic rocks, locally 20 meters thick, made of talc-chlorite-pyrite-richrocks that developped under greenschist facies conditions. Raman Spectroscopy on Carbonaceous Materials(RSCM), performed on the Mesozoic cover reveal that the entire sedimentary pile underwent temperatures rangingbetween 200C and 480C.We show that: (i) at the site of mantle rocks exhumation, the boudinaged pre-rift sediments have undergone drasticsyn-metamorphic thinning with the genesis of a S0/S1 foliation and, (ii) the Paleozoic basement has been ductilelydeformed, into thin tectonic lenses that remained welded to the exhumed mantle rocks. Therefore the overallcrustal rheology appears dominated by shallow levels having a ductile behavior. This rheology is related to thepresence of a thick pre- and syn-rift decoupled cover acting as an efficient thermal blanket. This new geologicaldata set highlights important characteristics of ductile-type hyper-extended passive margin that cannot be obtainedfrom the study of seismic lines. Finally, we stress that studying field analogues represents a major tool to betterunderstand the mechanisms of extreme crustal thinning associated with mantle exhumation and their structuralinheritance during tectonic inversion.
Geophysical Research Abstracts
Vienne, Austria

insu-01510103
https://hal-insu.archives-ouvertes.fr/insu-01510103

Éditeur(s) : HAL CCSD Elsevier
Résumé : A synthesis of backscatter imagery coupled with a large 3D seismic dataset in the Lower Congo Basin (LCB) reveals a patchy distribution of features interpreted to be associated with fluid seepage from 300 m to 2500 m water depth. With the exception of one region of anomalous backscatter positive-relief mounds, all inferred seep sites occur in negative-relief pockmarks. The extensive 3D seismic dataset in the LCB offers a unique opportunity to study the plumbing system that is feeding surface cold seep systems, and in general, to reconstruct the relationship between tectonics and fluid flow in continental margins. The fluid seeps in the LCB are associated with morphologically, stratigraphically or tectonically controlled focused fluid flow. The integration of the geophysical datasets, backscatter imagery coupled to 3D seismic, clearly indicates that fluid seeps are not randomly distributed, but their seabed organization reflects 1) the location of the underlying structure (reservoir or trap) where the fluids are coming from, 2) the geometry and morphology of the reservoir/trap, and 3) the discontinuities in the sedimentary column along which fluids have migrated. In the LCB seafloor pockmarks are always associated with underlying tectonic structures (fault zones, salt diapirs, polygonal faults) or buried sedimentary bodies (turbiditic channels, erosional surfaces), whereas they never occur above sub-horizontal parallel-stratified fine-grained sediments. Even if triggering processes can not be clearly defined here, we propose a model of seafloor fluid seep organization, which represents a new tool for identifying the geometry of flow pathways and the underlying buried bodies where the fluids are originating from. This qualitative 3D model provides insight into the geohydrologic processes of continental margins.
ISSN: 0025-3227

hal-00406640
https://hal.archives-ouvertes.fr/hal-00406640
DOI : 10.1016/j.margeo.2007.06.003

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
In this study, we propose a theoretical approach to test the validity of the isomechanical analogues for post-perovskite structures. Intrinsic plastic properties are evaluated for three materials exhibiting a post-perovskite phase: MgSiO3, MgGeO3 and CaIrO3. Dislocation properties of each structure are determined using the Peierls-Nabarro model based on first-principles calculations of generalised stacking fault and the plastic properties are extended to crystal-preferred orientations using a visco-plastic self-consistent method. This study provides intrinsic parameters of plastic deformation such as dislocation structures and Peierls stresses that can be directly compared between the three materials. It appears that it is very difficult to draw any simple conclusions on polycrystalline deformation simply by comparing single crystal properties. In particular, contrasting single crystal properties of MgSiO3 and CaIrO3 lead to similar crystal-preferred orientation of the polycrystal aggregates.
ISSN: 0031-9201

hal-00420104
https://hal.archives-ouvertes.fr/hal-00420104
DOI : 10.1016/j.pepi.2008.04.003

Éditeur(s) : HAL CCSD Société géologique de France
Résumé : International audience
In this paper we present and discuss new investigations performed on both the magmatic basement and the sedimentary formations of La Désirade. We report structural and sedimentary evidences for several episodes of deformation and displacement occurring prior to the present day tectonics. The main faults, respectively N130 ± 10°, N040 ± 10° and N090 ± 10°, previously considered as marker of the current tectonic regime corresponds to reactivated tectonic structures developed first during late Cretaceous compression and second during Pliocene to early Pleistocene extension. We demonstrate also the importance of late Pliocene-early Pleistocene and middle-late Pleistocene vertical movements in this part of the Lesser Antilles fore-arc as well as the role of compressive tectonics in the over thickened character of the arc basement in the Guadeloupe archipelago
EISSN: 1777-5817

hal-00830329
https://hal.archives-ouvertes.fr/hal-00830329
DOI : 10.2113/gssgfbull.184.1-2.21

Éditeur(s) : HAL CCSD Société géologique de France
Résumé : International audience
The Messinian salinity crisis (MSC) is characterized by gigantic erosion that remodels the margins while a thick, essentially evaporitic and detrital, sedimentary sequence forms in the deep basins. Based on recent (MAURESC, 2003) and earlier (MESEA 1, 1990; MAGIRAA, 1996; GEOBREST, 2002) seismic reflection data, this work brings to light the record of the MSC on the Provençal margin, which has until now been rarely explored from this perspective. Beyond its strictly regional interest, this study fits into a larger synthesis of MSC seismic markers in the Mediterranean and Black Sea marine domain [Lofi et al., 2011] and employs the new nomenclature established on this occasion. The results obtained reveal a Messinian detrital body (CU unit) of 625 metres maximum thickness at the foot of the margin, accumulating at the mouths of the principal canyons. Its form, facies and extension assimilate it to clastic fans, fed by subaerial erosion linked to the MSC. The relative geometry of CU and the Messinian units MU and UU deposited in the deep basin give indications to their chronostratigraphic relations. The deposition of the CU unit is posterior to the basal part of the mobile unit consisting of halite (MU), but contemporary to its top. These results agree with the recent scenarii, which propose that the precipitation of MU in the basin began early, during the lowering of the sea level, and ended at a low level during the MSC [Blanc, 2000; Martin et al., 2001; Sage et al., 2005; Ryan, 2009]. The UU unit surmounts MU and is subdivided into two sub-units with perceptibly different seismic facies : UU1 at the base and UU2 at the summit. UU1 could correspond to a unit containing more halite and/or more clastic material than UU2. The UU1 sub-unit could be partially contemporary to the CU unit. Concerning salt tectonics and its markers, three structural provinces have been evidenced in the sector of study, respectively : an upslope domain in extension (normal faults), an intermediary domain in translation (tabular MU) and a downslope domain in contraction (salt diapirs). These domains are directly linked to the gravity spreading and/or gliding of the brittle sedimentary cover formed by the CU, UU and Plio-Quatenary units and of the mobile level, MU. In the study area, a close relation between the distribution and thickness of CU and salt tectonics has additionally been evidenced at the mouths of the large Messinian canyons, being best expressed where CU is thick.
EISSN: 1777-5817

hal-00622998
https://hal-brgm.archives-ouvertes.fr/hal-00622998
DOI : 10.2113/gssgfbull.182.2.181

Éditeur(s) : HAL CCSD Société géologique de France
Résumé : International audience
The Messinian salinity crisis (MSC) is characterized by gigantic erosion that remodels the margins while a thick, essentially evaporitic and detrital, sedimentary sequence forms in the deep basins. Based on recent (MAURESC, 2003) and earlier (MESEA 1, 1990; MAGIRAA, 1996; GEOBREST, 2002) seismic reflection data, this work brings to light the record of the MSC on the Provençal margin, which has until now been rarely explored from this perspective. Beyond its strictly regional interest, this study fits into a larger synthesis of MSC seismic markers in the Mediterranean and Black Sea marine domain [Lofi et al., 2011] and employs the new nomenclature established on this occasion. The results obtained reveal a Messinian detrital body (CU unit) of 625 metres maximum thickness at the foot of the margin, accumulating at the mouths of the principal canyons. Its form, facies and extension assimilate it to clastic fans, fed by subaerial erosion linked to the MSC. The relative geometry of CU and the Messinian units MU and UU deposited in the deep basin give indications to their chronostratigraphic relations. The deposition of the CU unit is posterior to the basal part of the mobile unit consisting of halite (MU), but contemporary to its top. These results agree with the recent scenarii, which propose that the precipitation of MU in the basin began early, during the lowering of the sea level, and ended at a low level during the MSC [Blanc, 2000; Martin et al., 2001; Sage et al., 2005; Ryan, 2009]. The UU unit surmounts MU and is subdivided into two sub-units with perceptibly different seismic facies : UU1 at the base and UU2 at the summit. UU1 could correspond to a unit containing more halite and/or more clastic material than UU2. The UU1 sub-unit could be partially contemporary to the CU unit. Concerning salt tectonics and its markers, three structural provinces have been evidenced in the sector of study, respectively : an upslope domain in extension (normal faults), an intermediary domain in translation (tabular MU) and a downslope domain in contraction (salt diapirs). These domains are directly linked to the gravity spreading and/or gliding of the brittle sedimentary cover formed by the CU, UU and Plio-Quatenary units and of the mobile level, MU. In the study area, a close relation between the distribution and thickness of CU and salt tectonics has additionally been evidenced at the mouths of the large Messinian canyons, being best expressed where CU is thick.
EISSN: 1777-5817

hal-00498286
https://hal.archives-ouvertes.fr/hal-00498286

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The geologic evolution of the South Armenian Block (SAB) in the Mesozoic is reconstructed from a structural, metamorphic, and geochronologic study including U–Pb and 40Ar/39Ar dating. The South Armenian Block Crystalline Basement (SABCB) outcrops solely in a narrow tectonic window, NW of Yerevan. The study of this zone provides key and unprecedented information concerning closing of the Northern Neotethys oceanic domain north of the Taurides-Anatolides platform from the Middle Jurassic to the Early Cretaceous. The basement comprises of presumed Proterozoic orthogneiss overlain by metamorphosed pelites as well as intrusions of granodiorite and leucogranite during the Late Jurassic and Early Cretaceous. Structural, geochronological and petrological observations show a multiphased evolution of the northern margin of the SAB during the Late Jurassic and Early Cretaceous. A south-dipping subduction under the East Anatolian Platform-South Armenian Block (EAP-SAB) is proposed in order to suit recent findings pertaining emplacement of relatively hot subduction related granodiorite as well as the metamorphic evolution of the crystalline basement in the Lesser Caucasus area. The metamorphism is interpreted as evidencing: (1) M1 Barrovian MP–MT conditions (staurolite–kyanite) at c. 157–160 Ma and intrusion of dioritic magmas at c. 150–156 Ma, (2) near-adiabatic decompression is featured by partial melting and production of leucogranites at c. 153 Ma, followed by M2 HT–LP conditions (andalusite–K-feldspar). A phase of shearing and recrystallization is ascribed to doming at c. 130–150 Ma and cooling at 400 °C by c. 123 Ma (M3). Structural observations show (1) top to the north shearing during M1 and (2) radial extension during M2. The extensional event ends by emplacement of a thick detrital series along radial S, E and W-dipping normal faults. Further, the crystalline basement is unconformably covered by Upper Cretaceous-Paleocene series dated by nannofossils, evolving from Maastrichtian marly sandstones to Paleocene limestones.
ISSN: 0743-9547

hal-01174077
https://hal.archives-ouvertes.fr/hal-01174077
DOI : 10.1016/j.jseaes.2014.07.018