Éditeur(s) : HAL CCSD Springer Verlag
Résumé : International audience
The structure and dynamic evolution of a mountain belt piedmont are controlled by strong interactions between tectonics, surface processes (erosion, sedimentation), and climate. Studying these couplings relies on detailed geometric and kinematic analysis of morphostructural markers (folds, faults, terraces, alluvial surfaces) and analysis of syntectonic sedimentation. To study quantitatively how these markers form, evolve and record deformation, we developed a new analogue modelling approach using a specific composite granular material. The originality stands in the simultaneous modelling of orogenic deformation mechanisms and erosion-transport-sedimentation processes, but also in the use of techniques allowing quantitative measurement of morphostructural evolution. This methodology opens new perspectives in the fields of geomorphology (relief dynamics), seismotectonics (study of active faults), and sedimentology (including sequential stratigraphy).
ISSN: 0010-7999

hal-00411972
https://hal.archives-ouvertes.fr/hal-00411972
DOI : 10.1016/j.crte.2008.01.005

Éditeur(s) : HAL CCSD Elsevier Masson
Résumé : International audience
We provide new constraints on the modes of mantle exhumation and denudation in the pre-orogenic Pyrenees by investigating the poorly known peridotites located east of the Lherz body, in eastern Ariè ge (Vicdessos, Urs, Bestiac, Caussou and Prades main peridotitic bodies). We show that: (1) numerous peridotite bodies, not described so far, are constituted by decametric to sub-metric outcrops scattered between and around the main outcrops identified by Monchoux (1970); (2) most of the peridotites form blocks and lenses of various sizes, from millimetric monocrystalline grains to hectometric olistoliths, embedded in debris flows involving mainly Mesozoic metasediments; these peridotites can therefore be linked to the S-type peridotites of Lagabrielle et al. (2010), and share similarities with the peridotites of Lherz region (Clerc et al., 2012). All originated from tectono-sedimentary processes associated with mantle exhumation in relation with extreme thinning and breakoff of the continental basement; (3) the various petrographic characters of these peridotites and their heterogeneity in serpentinisation degree imply a peculiar mode of exhumation, which merges mantle fragments inherited from different structural levels; (4) the lack of tectonic structures such as faults and shear planes associated with the ultramafic-rich breccia formation and the presence of neoformation of metamorphic minerals within the matrix preclude their origin as cataclasites related to the Latest Cretaceous and Tertiary Pyrenean contractional deformation. The peridotites of eastern Ariè ge are indisputable witnesses of the presence of an inverted hyper-extended Cretaceous passive margin forming the current North Pyrenean zone. The geometry of the extensional system was complex and probably associated with strike-slip faults and transcurrent motion. ß 2016 The Authors. Published by Elsevier Masson SAS on behalf of Acadé mie des sciences. This is an open access article under the CC BY-NC-ND license (http://creativecommons. org/licenses/by-nc-nd/4.0/).
ISSN: 1631-0713

Droits : http://creativecommons.org/licenses/by-nc-nd/
insu-01280502
https://hal-insu.archives-ouvertes.fr/insu-01280502
https://hal-insu.archives-ouvertes.fr/insu-01280502/document
https://hal-insu.archives-ouvertes.fr/insu-01280502/file/1-s2.0-S1631071316000043-main.pdf
DOI : 10.1016/j.crte.2015.12.003

Éditeur(s) : HAL CCSD Geological Society of America
Résumé : International audience
Hollingsworth et al. (2008) propose that the westward motion of the South Caspian basin started 10 Ma ago. This is earlier than the ca. 5 Ma proposed by Axen et al. (2001) and Allen et al. (2002), and substantially earlier than the ca. 1.5 Ma proposed by Ritz et al. (2006). This new interpretation is based on the assumption that the present tectonics pattern (geometry of faults, slip vectors, and slip rates) did not vary through time.
ISSN: 0091-7613

hal-00854468
https://hal.archives-ouvertes.fr/hal-00854468
DOI : 10.1130/G25627C.1

Éditeur(s) : HAL CCSD AGU and the Geochemical Society
Résumé : International audience
Continental rifts and passive continental margins show fundamental along-axis segmentation patterns that have been attributed to one or a number of different processes: extensional fault geometry, variable stretching along strike, preexisting lithospheric compositional and structural heterogeneities, oblique rifting, and the presence or absence of eruptive volcanic centers. The length and width scales of the rift stage fault-bounded basin systems change during the late evolution of the new plate boundary, and the role of magmatism may increase as rifting progresses to continental rupture. Along obliquely spreading ridges, first-order mid-ocean ridge geometries originate during the synrift stage, indicating an intimate relationship between magma production and transform fault spacing and location. The Gulf of Aden rift is a young ocean basin in which the earliest synrift to breakup structures are well exposed onshore and covered by thin sediment layers offshore. This obliquely spreading rift is considered magma-poor and has several large-offset transforms that originated during late stage rifting and control the first-order axial segmentation of the spreading ridge. Widely spaced geophysical transects of passive margins that produce only isolated 2-D images of crust and uppermost mantle structure are inadequate for evaluation of competing rift evolution models. Using closely spaced new geophysical and geological observations from the Gulf of Aden we show that rift sectors between transforms have a large internal variability over short distances (∼10 km): the ocean-continent transition (OCT) evolves from a narrow magmatic transition to wider zones where continental mantle is probably exhumed. We suggest that this small-scale variability may be explained (1) by the distribution of volcanism and (2) by the along-strike differences in time-averaged extension rate of the oblique rift system. The volcanism may be associated with (1) the long-offset Alula-Fartak Fracture Zone, which may enhance magma production on its younger side, or (2) channeled flow from the Afar plume material along the newly formed OCT and the spreading ridge. Oblique extension and/or hot spot interactions may thereby have a significant control on the styles of rifting and continental breakup and on the evolution of many magma-poor margins.
ISSN: 1525-2027

hal-00504866
https://hal.archives-ouvertes.fr/hal-00504866
https://hal.archives-ouvertes.fr/hal-00504866/document
https://hal.archives-ouvertes.fr/hal-00504866/file/G3-Leroy_al-2010.pdf
DOI : 10.1029/2009GC002963

Éditeur(s) : HAL CCSD
Résumé : Annual report
We present here the results of CRS reprocessing of a 3D real dataset acquired in 2001 on the Tournemire site in France, which is an experimental site for the Institut de Radioprotection et de Sûreté Nucléaire (IRSN) to test geophysical imaging process in the context of geological nuclear waste storage. The main objective was to evaluate the ability of the methodology to recognize, in the carbonate cover of the experimental site clay layer, the prolongation of weak vertical-displacement faults seen in a tunnel within that clay layer. Previous seismic processing using the conventional common midpoint (CMP) approach did not provide satisfactory results in this cover, although the fault has beenrecognized in the carbonates underlying the clay layer. An original strategy was elaborated to define the best-possible parameters of the 3D Common-Reflection-Surface (CRS) stack. The procedure in- cluded refining the velocity search along a velocity guide, using a first CRS stack as the base of a subsequent curvature-parameter search, or a parameter smoothing before stacking. An optimal ap- proach was elaborated on a subset of the data, and furthermore applied to the whole dataset. The resulting image shows improved event continuity in the carbonate cover, which allowed for horizon picking after depth migration, as well as the estimation of post-stack geometrical attributes, such as coherency. The processing indicates a zone of degraded quality of reflection events lying in the N-S direction, above the known fault zone within the underlying formations. Such feature corresponds to an alteration zone at the earth surface. Further investigation at a higher resolution scale is planned to confirm whether this zone could be a spot of possible leakage
https://hal.archives-ouvertes.fr/hal-00857376

hal-00857376
https://hal.archives-ouvertes.fr/hal-00857376

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
In the framework of the Africa-Europe convergence, the Mediterranean system presents a complex interaction between subduction rollback and upper-plate deformation during the Tertiary. The western end of the system shows a narrow arcuate geometry across the Gibraltar arc, the Betic-Rif belt, in which the relationship between slab dynamics and surface tectonics is not well understood. The present study focuses on the Western Betics, which is characterized by two major thrusts: 1/ the Internal/External Zone Boundary limits the metamorphic domain (Alboran Domain) from the fold-and-thrust belts in the External Zone; 2/ the Ronda Peridotites Thrust allows the juxtaposition of a strongly attenuated lithosphere section with large bodies of sub-continental mantle rocks on top of upper crustal rocks. New structural data show that two major E-W strike-slip corridors played a major role in the deformation pattern of the Alboran Domain, in which E-W dextral strike-slip faults, N60 thrusts and N140 normal faults developed simultaneously during dextral strike-slip simple shear. Olistostromic sediments of Lower Miocene age were deposited and deformed in this tectonic context and hence provide an age estimate for the inferred continuous westward translation of the Alboran Domain that is accommodated by an E-W lateral (strike-slip) ramp and a N60 frontal thrust. The crustal emplacement of large bodies of sub-continental mantle may occur at the onset of this westward thrusting in the Western Alboran domain. At lithosphere-scale, we interpret the observed deformation pattern as the subduction upper-plate expression of a lateral slab tear and its westward propagation since Lower Miocene.
ISSN: 0040-1951

insu-01163695
https://hal-insu.archives-ouvertes.fr/insu-01163695
https://hal-insu.archives-ouvertes.fr/insu-01163695/document
https://hal-insu.archives-ouvertes.fr/insu-01163695/file/Frasca-2015.pdf
DOI : 10.1016/j.tecto.2015.05.017

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
We analyze in this study a new set of marine data including 3D local tomography, 1992-2008 relocated earthquakes and two recent multichannel seismic lines to characterize the deformation style in the collision area offshore east Taiwan. We have mapped in detail the Mohos of the converging plates as well as the subduction interface with a resolution never reached before. We show that the sharp continental subduction of the Eurasia plate, beneath the middle part of the Central Range, indents the Philippine Sea plate (PSP) as attested by intra-oceanic slicing and incipient subduction of the PSP beneath the east coast of Taiwan. The westernmost part of the PSP slab is probably experiencing a beginning of break-off as attested by NW-trending en-échelon shear zones beneath the southern slope of the southern Ryukyu arc (SRA). These en-échelon shear zones have a sinistral component favored by the "collision-free" subduction of the PSP north of 24°30′N. The down-faulting of the subduction interface forms ramps along which earthquakes clusterize. Three M7 subduction earthquakes occurred offshore Suao city along these ramps with a recurrence interval of about 40 years: 1920 Mw7.7, 1963 Mw7.2 and 2002 Mw7.1 events. The 1966 Mw6.0-7.5 earthquakes sequence likely outlines a WNW-ESE left-lateral intra-slab shear zone. The SRA upper plate accommodates the complex geometry and deformation of the subducting PSP through seismic deformation. Shallow high velocities fringing the Luzon volcanic arc (LVA) beneath the Longitudinal Valley and north of the southernmost Ryukyu forearc basins are interpreted as relics of the LVA forearc basement squeezed in the collision zone. Based on the accommodation of a large part of the convergence through shortening within the PSP and the subsequent segmentation of the shallow subduction interface, we consider that the nucleation of a Mw ≥ 8 earthquake along the southernmost Ryukyu megathrust is unlikely.
ISSN: 0040-1951

hal-00853365
https://hal.archives-ouvertes.fr/hal-00853365
https://hal.archives-ouvertes.fr/hal-00853365/document
https://hal.archives-ouvertes.fr/hal-00853365/file/publallemandifremer.pdf
DOI : 10.1016/j.tecto.2013.03.020

Éditeur(s) : HAL CCSD American Geophysical Union (AGU)
Résumé : International audience
The Calabro-Peloritan belt constitutes the eastward termination of the southern segment of the Alpine Mediterranean belt. This orogenic system was built up during the convergence between the Eurasian and the African plates, roughly directed North-South since the Upper Cretaceous. It was subsequently fragmented during the opening of the Western Mediterranean basins since Oligocene times. The curved shape of the Calabro-Peloritan belt was acquired during the opening of the Tyrrhenian basin since Tortonian. The origin, kinematics and significance of the Calabro-Peloritan tectonic pile are still debated. Our data in the Aspromonte Massif of Southern Calabria reveal an Alpine history marked by two main superimposed kinematic regimes. (i) A first phase corresponds to the piling up of basement nappes with a top-to-the-SE vergence, i.e in a direction orthogonal to the belt trend and towards the Adriatic foreland. This external vergence is similar to what is observed in both Northeastern Sicily and Northern Calabria. In Sicily, the age of nappe piling is Alpine, as evidenced by pinched slices of Mesozoïc sediments. In the Aspromonte Massif, thrusting age is less constrained. Our data suggest remnants of late Hercynian structuration before the Alpine stacking. (ii) A second phase corresponds to the thinning of the continental crust, dated at around 30 Ma by both geochronological and stratigraphical data. This extension is mainly localized on two low-angle detachment contacts, with top-to-the-NE displacement. The lower one corresponds to the reworking of the former main nappe contact. The upper one is a large detachment fault cutting across the pile from upper sedimentary levels down to metamorphic basement. Extension of similar Alpine age and similar internal vergence has been already recognized in other parts of the Calabro-Peloritan Arc: in the basement nappes of Northeastern Sicily and in the ophiolitic units of Northern Calabria. Coming back to the original geometry and position of the Calabro-Peloritan belt, before its bending and the opening of the Liguro-Provençal and Tyrrhenian basins, we evidence a homogeneous Oligocene NE-SW extension all along the Calabro-Peloritan segment of the Alpine Mediterranean belt. This tectonometamorphic history is best explained within the framework of the continuous Tertiary westward dipping subduction of the Tethyan oceanic domain below the European active margin and the progressive eastward retreat of the Apennine trench since Oligocene times.
ISSN: 0278-7407

hal-00283182
https://hal.archives-ouvertes.fr/hal-00283182
https://hal.archives-ouvertes.fr/hal-00283182/document
https://hal.archives-ouvertes.fr/hal-00283182/file/Heymes_et_al_2008.pdf
DOI : 10.1029/2007TC002157

Éditeur(s) : HAL CCSD Geological Society of London
Résumé : International audience
The interplay between tectonics and erosion has a predominant control on the evolution of the morphology of mountain belts. Here we investigate the modalities of deformation in Central Nepal on a c. 100 ka time scale in response to tectonic and external forcings, through the use of a finite-element thermomechanical model coupled with an integrative denudation formulation that accounts for fluvial incision and hillslope landsliding. We study the complex coupling existing between tectonics and erosion, with special emphasis on the influences of rock strength and rainfall distributions. Our results underline the key role played by lithologic variations in the elevation of both rivers and mean topography. We show that the location of the Main Frontal Thrust is mainly controlled by the low erodability of the unconsolidated sandstone in the Siwaliks Hills. As previously suspected (Burbank et al. 2003), our simulations demonstrate that the pattern of uplift in Nepal is mainly dependent on both erodability and fault geometry, rather than on rainfall distribution.
ISSN: 2041-4927

hal-01543331
https://hal-amu.archives-ouvertes.fr/hal-01543331
DOI : 10.1144/GSL.SP.2006.253.01.18

Éditeur(s) : HAL CCSD
Résumé : Among erosion processes, river incision is classicaly described as a key process controlling erosion of landscapes. Incision efficiency is mainly influenced by climate and erodibility. This latter is not only dependent on the nature of the bedrock, but also on its past deformation, which affects its rheological effective properties, such as fracture density. The main objectives of this thesis are: (1) to better constrain the relationship between effective properties and erodibility, and (2) to quantify the influence of erodibility and erosion on both the temporal and spatial building or decay of the topography. Several numerical tools are developed. A 1D formalism of landscape evolution is introduced, including river incision with stochastic distribution of water discharge and hillslope landsliding. A new remeshing algorithm called Surface Lagrangian Remeshing (SLR) is developed as a complement to remeshing algorithms dealing with internal elements. It allows one to take into account long-term erosion into 2D Lagrangian numerical codes based on triangular finite elements. Then the potentiality of measuring erodibility in-situ using a Schmidt hammer (R) is assessed for the active orogen of Taiwan, the diagenetic Annot sandstones and St Clement fault zone. Results suggest a strong control of R by effective properties. A linear model based on effective medium theory is applied to a fault zone with an unmacthed resolution (750 measures, 25 measures per square meter). The model successfully correlates R to fracture density. These results demonstrate that effective elasticity as well as erodibility are sensitive to the density and type of fractures. Finally I focus on the erosional and rheological conditions that allows reproducing post-orogenic evolution of mountain belts. A model coupling surface erosion and regional isostatic uplift is consistent with observations. The topographic decay and decrease of the ratio of surface elevation over crustal root thickness is at first order controlled by the initial geometry of the mountain belt and erosion efficiency. This new model highlights the control ofclimate and erodibility on the topographic decay and of lithospheric rheology on the perseverance of crustal roots.
Parmi les processus d'érosion, l'incision des rivières est classiquement décrit comme un processus clé contrôlant l'érosion des paysages. L'efficacité de l'incision est principalement influencée par le climat et par l'érodabilité. Ce dernier paramètre ne dépend pas seulement de la nature du substratum rocheux, mais aussi de sa déformation passée qui affecte ses propriétés rhéologiques équivalentes. Les principaux objectifs de cette thèse sont: (1) de mieux contraindre les relations entre propriétés équivalentes et érodabilité, et (2) de quantifier l'influence de l'érosion et de l'érodabilité sur la formation ou la décadence, spatiale et temporelle, de la topographie. Plusieurs outils numériques sont développés. Un formalisme 1D d'évolution des paysages est proposé, prenant en compte simultanément l'incision des rivières avec une distribution stochastique des débits en eau et l'érosion des versants par glissements de terrain. Un nouvel algorithme de remaillage appelé Surface Lagrangian Remeshing (SLR) est développé. Il permet de prendre en compte l'érosion à long terme dans les codes numériques 2D Lagrangiens basés sur des éléments finis triangulaires. Ensuite, la possibilité de mesurer in-situ l'érodabilité avec un marteau de Schmidt (R) est évaluée pour: l'orogène actif de Taiwan, les grès diagénétiques d'Annot et la zone de faille de St Clément. Les résultats suggèrent un fort contrôle de R par les propriétés équivalentes des roches testées. Un modèle linéaire, basé sur la théorie des milieux équivalents, est appliqué à une zone de faille avec une résolution inégalée (750 mesures, 25 mesures par mètre carré). Le modèle permet de corréler avec succès la densité de fracture et R. Ces résultats démontrent empiriquement que l'élasticité équivalente ainsi que l'érodabilité sont sensibles à la densité et à la nature des fractures. Enfin j'étudie les conditions d'érosion et de rhéologie qui permettent de reproduire l'évolution des chaînes de montagnes post-orogéniques. Un modèle couplant érosion en surface et soulèvement isostatique régional est compatible avec les observations. Les taux de décroissance topographique et de diminution du rapport de l'élévation de surface sur l'épaisseur de racine crustale sont contrôlés au premier ordre par la géométrie initiale de la chaîne de montagne et par l'efficacité de l'érosion. Ce nouveau modèle met en évidence le contrôle du climat et de l'érodabilité sur la décroissance topographique et de la rhéologie lithosphérique sur la persévérance des racines crustales.
https://tel.archives-ouvertes.fr/tel-00602341

tel-00602341
https://tel.archives-ouvertes.fr/tel-00602341
https://tel.archives-ouvertes.fr/tel-00602341/document
https://tel.archives-ouvertes.fr/tel-00602341/file/thesephilippesteer.pdf

Éditeur(s) : HAL CCSD Wiley-Blackwell
Résumé : International audience
Physical modeling of oblique subduction is performed to study the mechanism of strain partitioning. The model is two-layer and includes the elasto-plastic lithosphere (the overriding and subducting plates) and the low-viscosity liquid asthenosphere. The subduction is driven by a push force from a piston and a pull force when the density contrast Ap between the subducting plate and the asthenosphere is positive. We vary both Ap and the interplate friction (frictional stresses). Slip partitioning is obtained only in the models with high interplate friction and only when the overriding plate contains a weak zone. This zone in the models corresponds either to locally thinned litho-sphere or to cut (fault). The horizontal, trench-normal component of the interplate friction force [Ffh[ can be comparable with the absolute value of the horizontal component of the nonhydrostatic interplate pressure force [Fph [ in the subduction zone. Ffh is always negative (compression), while Fph can be either negative (compressional subduction regime) or positive (extensional regime). High friction, which promotes partitioning, can completely cancel the extensional (suction) force Fph. Back arc tension and strike-slip faulting appear thus as conflicting processes, although they can coexist in the same subduction zone, depending on the relative values of relevant forces. It appears that high friction can exist only in compressional subduction zones where partitioning should develop more easily. This conclusion is supported by the comparison of two oblique subduction zones, having similar geometry: the compressional southern Kurile zone (strong partitioning) and extensional southern Ryukyu zone (no lithospheric-scale partitioning). Other factors controlling the strain partitioning are the length of the oblique subductlon zone, the boundary conditions at the transverse limits of the forearc sliver, and of course, the obliquity of subduction.
ISSN: 2169-9275

hal-01261396
https://hal.archives-ouvertes.fr/hal-01261396
https://hal.archives-ouvertes.fr/hal-01261396/document
https://hal.archives-ouvertes.fr/hal-01261396/file/chemendaJGR2000.pdf
DOI : 10.1029/1999JB900332

Éditeur(s) : HAL CCSD
Résumé : International audience
The Corinth Rift is the most seismically active zone in Europe. The area is characterized by very localized NSextension at a rate of1.5cm/year, the occurrence of frequent and intensive microseismic crises and occasionalmoderate to large earthquakes like in 1995 (Mw=6.1).Since the year 2000, the Corinth Rift Laboratory (CRL, http://crlab.eu) consisting in a multidisciplinary naturalobservatory, aims at understanding the mechanics of faulting and earthquake nucleation in the Rift. Recent studieshave improved our view about fault geometry and mechanics within CRL, but there is still a critical need for a betterknowledge of the structure at depth both for the accuracy of earthquake locations and for mechanical interpretationof the seismicity.In this project, we aim to analyze the complete seismological database (13 years of recordings) of CRL by usingrecently developed methodologies of structural imaging, in order to determine at the same time and with highresolution, the local 3D structure and the earthquake locations.We perform an iterative joint determination of 3D velocity model and earthquake coordinates. In a first step, Pand S velocity models are determined using first arrival time tomography method proposed by Taillandier et al.(2009). It consists in the minimization of the cost function between observed and theoretical arrival times which isachieved by the steepest descent method (e.g. Tarantola 1987). This latter requires computing the gradient of thecost function by using the adjoint state method (Chavent 1974). In a second step, earthquakes are located in thenew velocity model with a non-linear inversion method based on a Bayesian formulation (Gesret et al. 2015). Step1 and 2 are repeated until the cost function no longer decreases.We present preliminary results consisting in: (1) the adjustement of a 1D velocity model that is used as initialmodel of the 3D tomography and (2) a first attempt of the joint determination of 3D velocity model and earthquakelocation.In addition to the tomographic imaging, we perform a preliminary receiver function analysis of teleseismic datarecorded by the broadband stations of the CRL network. The RF analysis should provide the interface depthsbeneath seismometers and increase the imaging resolution of the upper crustal structures provided by the 3Dtomography. In this first attempt, we adjust the 1D velocity model that produces a synthetic RF as similar aspossible to the observed RF for a subset of data. We compare the identified interfaces with structures imaged bythe tomography.
EGU general assembly 2016
Vienne, Austria

hal-01306224
https://hal-mines-paristech.archives-ouvertes.fr/hal-01306224

Éditeur(s) : HAL CCSD Oxford University Press (OUP)
Résumé : International audience
We investigate the deformation induced by water pressure variations in hydrologically active natural fractures, and recorded by tiltmeters and strainmeters. The deformation associated with a single fracture is derived using finite-element modelling (FEM). A range in fracture geometries is explored, first to highlight the sensitivity of each geometrical parameter to the deformation, and secondly to allow transfer to observation sites. Water level variations in the fracture are then derived from a hydrological model, driven by observed rainfall, and calibrated on fracture water flow measurements. The modelling results are explicitly applied to constrain the local hydrological contribution to observations with the 100-m-long hydrostatic tiltmeter installed at Sainte-Croix-aux-Mines (France). Our study shows that well-founded physical modelling of local hydrological effect allows a substantial correction of records in observatories.
ISSN: 0956-540X

hal-00708093
https://hal.archives-ouvertes.fr/hal-00708093
https://hal.archives-ouvertes.fr/hal-00708093/document
https://hal.archives-ouvertes.fr/hal-00708093/file/fracture_v72.pdf
BIBCODE : 2009GeoJI.178..667L

Éditeur(s) : HAL CCSD Geological Society of America
Résumé : International audience
We combine surface structural measurements, subsurface seismic imaging, and magneto-stratigraphic dating to retrieve, through geometric modeling, the detailed history of fold growth and sedimentation across the Huerguosi anticline, on the northern Tianshan piedmont, taking advantage of a beautifully exposed section of growth strata. The model assumes a fault-bend folding mechanism, consistent with subsurface fold geometry. The shortening history is obtained by least-squares fitting of the measured dip angles of the growth strata. The shortening rate across the anticline is shown to have been remarkably constant: it increased only slightly from 0.84 ± 0.04 mm/yr between 10 and 4 Ma to 1.14 ± 0.02 mm/yr over the past 4 m.y. This approach also allows correcting syntectonic sedimentation rates for the effect of the fold growth and shows that the sedimentation rates in the piggyback basin increased abruptly from ~0.4 to ~0.7 mm/yr ca. 4 Ma.
ISSN: 0091-7613

insu-00338254
https://hal-insu.archives-ouvertes.fr/insu-00338254
DOI : 10.1130/G25073A.1

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
We developed a new granular material (MatIV) to study experimentally landscape evolution in active mountain belt piedmonts. Its composition and related physical properties have been determined using empirical criteria derived from the scaling of deformation, erosion-transport and sedimentation natural processes. MatIV is a water-saturated composite material made up with 4 granular components (silica powder, glass microbeads, plastic powder and graphite) whose physical, mechanical and erosion-related properties were measured with different laboratory tests. Mechanical measurements were made on a modified Hubbert-type direct shear apparatus. Erosion-related properties were determined using an experimental set-up that allows quantifying the erosion/sedimentation budget from tilted relaxation topographies. For MatIV, we also investigated the evolution of mean erosion rates and stream power erosion law exponents in 1D as a function of slope.;Our results indicate that MatIV satisfies most of the defined criteria. It deforms brittlely according to the linear Mohr-Coulomb failure criterion and localizes deformation along discrete faults. Its erosion pattern is characterized by realistic hillslope and channelized processes (slope diffusion, mass wasting, channel incision). During transport, eroded particles are sorted depending on their density and shape, which results in stratified alluvial deposits displaying lateral fades variations. To evaluate the degree of similitude between model and nature, we used a new experimental device that combines accretionary wedge deformation mechanisms and surface runoff erosion processes. Results indicate that MatIV succeeded in producing detailed morphological and sedi-mentological features (drainage basin, channel network, terrace, syntectonic alluvial fan). Geometric, kinematic and dynamic similarity criteria have been investigated to compare precisely model to nature. Although scaling is incomplete, it yields particularly informative orders of magnitude. With all these characteristics, MatIV appears as a very promising material to investigate experimentally a wide range of scientific questions dealing with relief dynamics and interactions between tectonics, erosion and sedimentation processes.
ISSN: 0040-1951

hal-00669904
https://hal.archives-ouvertes.fr/hal-00669904
DOI : 10.1016/j.tecto.2011.09.029

Éditeur(s) : HAL CCSD Société géologique de France
Résumé : International audience
The Messinian salinity crisis (MSC) is characterized by gigantic erosion that remodels the margins while a thick, essentially evaporitic and detrital, sedimentary sequence forms in the deep basins. Based on recent (MAURESC, 2003) and earlier (MESEA 1, 1990; MAGIRAA, 1996; GEOBREST, 2002) seismic reflection data, this work brings to light the record of the MSC on the Provençal margin, which has until now been rarely explored from this perspective. Beyond its strictly regional interest, this study fits into a larger synthesis of MSC seismic markers in the Mediterranean and Black Sea marine domain [Lofi et al., 2011] and employs the new nomenclature established on this occasion. The results obtained reveal a Messinian detrital body (CU unit) of 625 metres maximum thickness at the foot of the margin, accumulating at the mouths of the principal canyons. Its form, facies and extension assimilate it to clastic fans, fed by subaerial erosion linked to the MSC. The relative geometry of CU and the Messinian units MU and UU deposited in the deep basin give indications to their chronostratigraphic relations. The deposition of the CU unit is posterior to the basal part of the mobile unit consisting of halite (MU), but contemporary to its top. These results agree with the recent scenarii, which propose that the precipitation of MU in the basin began early, during the lowering of the sea level, and ended at a low level during the MSC [Blanc, 2000; Martin et al., 2001; Sage et al., 2005; Ryan, 2009]. The UU unit surmounts MU and is subdivided into two sub-units with perceptibly different seismic facies : UU1 at the base and UU2 at the summit. UU1 could correspond to a unit containing more halite and/or more clastic material than UU2. The UU1 sub-unit could be partially contemporary to the CU unit. Concerning salt tectonics and its markers, three structural provinces have been evidenced in the sector of study, respectively : an upslope domain in extension (normal faults), an intermediary domain in translation (tabular MU) and a downslope domain in contraction (salt diapirs). These domains are directly linked to the gravity spreading and/or gliding of the brittle sedimentary cover formed by the CU, UU and Plio-Quatenary units and of the mobile level, MU. In the study area, a close relation between the distribution and thickness of CU and salt tectonics has additionally been evidenced at the mouths of the large Messinian canyons, being best expressed where CU is thick.
EISSN: 1777-5817

hal-00622998
https://hal-brgm.archives-ouvertes.fr/hal-00622998
DOI : 10.2113/gssgfbull.182.2.181

Éditeur(s) : HAL CCSD Société géologique de France
Résumé : International audience
The Messinian salinity crisis (MSC) is characterized by gigantic erosion that remodels the margins while a thick, essentially evaporitic and detrital, sedimentary sequence forms in the deep basins. Based on recent (MAURESC, 2003) and earlier (MESEA 1, 1990; MAGIRAA, 1996; GEOBREST, 2002) seismic reflection data, this work brings to light the record of the MSC on the Provençal margin, which has until now been rarely explored from this perspective. Beyond its strictly regional interest, this study fits into a larger synthesis of MSC seismic markers in the Mediterranean and Black Sea marine domain [Lofi et al., 2011] and employs the new nomenclature established on this occasion. The results obtained reveal a Messinian detrital body (CU unit) of 625 metres maximum thickness at the foot of the margin, accumulating at the mouths of the principal canyons. Its form, facies and extension assimilate it to clastic fans, fed by subaerial erosion linked to the MSC. The relative geometry of CU and the Messinian units MU and UU deposited in the deep basin give indications to their chronostratigraphic relations. The deposition of the CU unit is posterior to the basal part of the mobile unit consisting of halite (MU), but contemporary to its top. These results agree with the recent scenarii, which propose that the precipitation of MU in the basin began early, during the lowering of the sea level, and ended at a low level during the MSC [Blanc, 2000; Martin et al., 2001; Sage et al., 2005; Ryan, 2009]. The UU unit surmounts MU and is subdivided into two sub-units with perceptibly different seismic facies : UU1 at the base and UU2 at the summit. UU1 could correspond to a unit containing more halite and/or more clastic material than UU2. The UU1 sub-unit could be partially contemporary to the CU unit. Concerning salt tectonics and its markers, three structural provinces have been evidenced in the sector of study, respectively : an upslope domain in extension (normal faults), an intermediary domain in translation (tabular MU) and a downslope domain in contraction (salt diapirs). These domains are directly linked to the gravity spreading and/or gliding of the brittle sedimentary cover formed by the CU, UU and Plio-Quatenary units and of the mobile level, MU. In the study area, a close relation between the distribution and thickness of CU and salt tectonics has additionally been evidenced at the mouths of the large Messinian canyons, being best expressed where CU is thick.
EISSN: 1777-5817

hal-00498286
https://hal.archives-ouvertes.fr/hal-00498286

Éditeur(s) : HAL CCSD
Résumé : International audience
Aegean extension is a process driven by slab rollback that since 45 Ma shows a two-stage evolution. From 45 to13 Ma it is accommodated by localized deformation leading to i) the exhumation of high-pressure metamorphicrocks from mantle to crustal depths, ii) the exhumation of high-temperature rocks in core complexes and iii) thedeposition of Paleogene sedimentary basins. Since 13 Ma, extension is distributed over the whole Aegean domaingiving a widespread development of onshore and offshore Neogene sedimentary basins. The 3D reconstruction atAegean scale of this two-stage evolution shows that the rate of trench retreat was around 0.6 cm/y during the first30 My and then accelerated up to 3.2 cm/y during the last 13 My. Using available tomographic evidence, timingof metamorphic and sedimentary processes, paleomagnetic data and geometry and kinematics of deformation, wepropose that the sharp transition in trench retreat and deformation mode, localized vs distributed, at 13 Ma wascontrolled to slab tearing. Moreover, the development of dextral NE-SW strike-slip faults and related pull-apartbasins in the North Aegean domain, from the Cyclades to the Rhodope, strongly suggests that this sharp transitionalso corresponds to the onset of Anatolia westward escape.
Geophysical Research Abstracts
Vienne, Austria

insu-01137631
https://hal-insu.archives-ouvertes.fr/insu-01137631