Éditeur(s) : HAL CCSD
Résumé : In order to identify and quantify the Rif (Morocco) present-day deformation, especially those related to active faults (location, geometry, kinematic), we perform a morphotectonic study. The studied area and faults are located in the Northern part (conjugate faults of Al-Hoceima Bay: Trougout, Boujibar and Rouadi), the Eastern part (Nekor fault) and the Southern part of the chain (Rif frontal thrust between Fes and Meknes cities).Morphotectonic tools (DEMs at different scales, satellite and aerial pictures), field studies and Quaternary dating methods (U/Th, OSL, 14C and in-situ cosmogenic isotopes 10Be, 3He, 36Cl) allow us to characterize transtensional deformation in the Northern Rif. Horizontal and vertical slip rates along the N-S-oriented Trougout major fault are ~1.6 mm/yr and ~2 mm/yr respectively. In the Southern part, the Rif frontal thrust shows a shortening rate of ~1.8 mm/yr into Fes and Meknes area. In the Eastern part, the deformation is focused on the Nekor left-lateral strike-slip major fault with ~1.5 mm/yr. Incision features and raised marine terraces involve an uplift of the chain about ~0.2 mm/yr. The overall deformation in the Rif seems to be continuous since the Messinian-Pliocene time.These new morphotectonic constraints are consistent with the GPS measurements showing southwestward overall motion of most of the Rif belt with respect to stable Africa, associated to clockwise rotation. Finally, we propose a geodynamic model in which the Rif, the Alboran sea and the Betics belong to a single microplate bounded by the strike-slip faults of the Betics on the North, the Rif frontal thrust on the South, the Nekor and TASZ (Trans Alboran Shear Zone) strike-slip faults on the East and North-East, and the western Rif folded structures on the West.
L'objectif de cette étude est d'identifier et de quantifier les déformations actuelles dans la chaine du Rif (Maroc), notamment celles associées aux failles actives (localisation, géométrie, cinématique). Pour ce faire, nous mettons en œuvre pour la première fois dans cette région, une approche morphotectonique. Les sites et failles sélectionnés et étudiés se situent dans la partie Nord (les failles conjuguées de la baie d'Al-Hoceima: Trougout, Boujibar et Rouadi), l'Est (la faille de Nékor) et le Sud (front chevauchant sud rifain entre Fes et Meknes).A partir des outils de la morphotectonique (MNTs à différentes résolutions, images satellitaires, photographies aériennes), d'analyses de terrain et grâce aux méthodes de datation du Quaternaire (U/Th, OSL, 14C et isotopes cosmogéniques produits in-situ 10Be, 3He, 36Cl), cette étude met en évidence et quantifie une déformation transtensive dans la partie Nord de la chaine. Les vitesses de glissement horizontales et verticales le long de la faille principale d'orientation méridienne de Trougout sont de ~1.6 mm/an et ~2 mm/an, respectivement. Dans la partie Sud, nous montrons que le front rifain entre Fez et Meknes est actif avec une vitesse de raccourcissement de ~1.8 mm/an. La déformation dans la région Est se localise principalement sur la faille du Nékor avec une vitesse décrochante senestre de ~1.5 mm/an. Par ailleurs, la présence de nombreuses figures d'incision et de surfaces marines soulevées au niveau du littoral Nord témoignent d'une surrection généralisée de la chaine de l'ordre de ~0.2 mm/an. L'ensemble de cette déformation semble être constante depuis la période du Messino-Pliocène. Ces résultats sont cohérents avec les données GPS qui montrent un déplacement de ~5mm/an vers le SW de l'ensemble du Rif associé à un mouvement rotatif horaire, dans le référentiel Afrique stable. D'un point de vue géodynamique, nous proposons que le Rif, la mer d'Alboran et les Bétiques appartiennent à une même microplaque limitée au Nord par les failles décrochantes des Bétiques, au Sud par le chevauchement rifain, à l'Est et au Nord-Est par les failles décrochantes de Nékor et de la TASZ (Trans Alboran Shear Zone) et à l'Ouest par les structures plissées bordières du Rif.
https://tel.archives-ouvertes.fr/tel-01170466

NNT : 2014MON20105
tel-01170466
https://tel.archives-ouvertes.fr/tel-01170466
https://tel.archives-ouvertes.fr/tel-01170466v2/document
https://tel.archives-ouvertes.fr/tel-01170466/file/41875_POUJOL_2014_archivage_cor.pdf

Éditeur(s) : HAL CCSD Oxford University Press (OUP)
Résumé : International audience
We performed forward modelling of seismic anisotropy beneath a migrating strike-slip plate boundary to: (1) test if such a geodynamic context might explain teleseismic shear wave splitting data in the vicinity of the central part of the San Andreas Fault and (2) constrain the power of such data to unravel vertical and lateral variations in deformation patterns in the upper mantle. The modelling involves five steps: (1) thermomechanical modelling, using a finite-element code, of the deformation field, (2) viscoplastic self-consistent modelling of the resulting olivine and pyroxene crystal preferred orientations, (3) calculation of the elasticity tensors for different domains of the finite elements (FEs) model, (4) forward modelling of seismic wave propagation through the model using ray theory, finite-frequency theory and a full-wave approach and (5) performing splitting measurements on the synthetic seismograms. SKS splitting data in central California are best fitted by a model with a hotter geotherm within 60 km of the plate boundary accounting for the opening of an asthenospheric window due to the northward migration of the Mendocino Triple Junction. The westward motion of the plate boundary cannot however explain the rotation of fast polarization directions east of the San Andreas Fault in central California. Comparison between modelled and measured individual shear wave splitting also implies that the homogeneity of the two-layer models accounting for the observations in the vicinity of the San Andreas Fault indicates a sharp transition between lithospheric and asthenospheric deformations beneath this plate boundary. The ability of different synthetic approaches to localize horizontally and vertically the plate boundary-related deformation differs significantly. Splitting in ray theory synthetics closely follow variations in olivine crystallographic preferred orientations in the model. In contrast, splitting analysis on full-wave synthetics, which should be more representative of actual long-period SKS waves, results in smooth apparent lateral variations of anisotropy; the exact location and width of the plate boundary may only be retrieved by comparing fast-polarization profiles obtained using a multichannel analysis on waves with different periods.
ISSN: 0956-540X

hal-01236150
http://hal.univ-reunion.fr/hal-01236150
http://hal.univ-reunion.fr/hal-01236150/document
http://hal.univ-reunion.fr/hal-01236150/file/Bonnin_San_Andreas_modelling_GJI2012.pdf
DOI : 10.1111/j.1365-246X.2012.05650.x

Éditeur(s) : HAL CCSD Elsevier Masson
Résumé : On the basis of an existing multiparameter borehole fluid sensor(p, T Cw, pH, Eh), a new downhole tool designed for 200 bars and 75 degrees C was developed to measure the spontaneous electrical potential in situ with great precision (better than a mu V). To this end, the new sensor is based on the use of unpolarizable Pb/PbCl2 electrodes either at the surface or downhole. In situ testing has demonstrated a capacity to identify several subsurface sources of natural electrical potential such as diffusion ones (membrane potential in the presence of clays, Fickian processes due to pore fluid salinity gradients), or else the electrokinetic mechanisms with gradients in pore fluid pressure. As a consequence, Multi-Sensors Electrical Tool (MuSET) might be used as an "electrical flow meter" sensitive to both horizontal and vertical fluid flow in a vertical borehole.
ISSN: 1631-0713

hal-00445251
https://hal.archives-ouvertes.fr/hal-00445251
DOI : 10.1016/j.crte.2009.07.009

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
To constrain the relations between deformation and metasomatism in the subcratonic lithospheric mantle, we have analyzed the microstructures and crystal preferred orientations in 50 mantle xenoliths from the Kaapvaal craton. Water contents in olivine and pyroxenes were measured in 14 samples equilibrated at different depths. Coarse-granular microstructures recording deformation by dislocation creep followed by annealing predominate. Mylonitic (sheared) peridotites with partially or totally recrystallized microstructures are however common below 140 km. Refractory compositions predominate, but multiple metasomatic events resulted in orthopyroxene enrichment or secondary crystallization of clinopyroxene and phlogopite. Coherent orthopyroxene and olivine CPO in most coarse-grained peridotites implies in pre- to syn-kinematic orthopyroxene enrichment or epitaxial growth on primary orthopyroxene. Undeformed, interstitial orthopyroxene, clinopyroxene, and phlogopite with random orientations in coarse-grained peridotites record post-kinematic modal metasomatic events. Deformation of these phases in the sheared peridotites implies that mylonitization results from a later event, which affected locally the deep cratonic lithosphere. Olivine CPO recording dominant [100] glide predominate at all depths. Only two samples, equilibrated at ~ 3.3 GPa show olivine [001] and orthopyroxene [001] axes subparallel, suggesting dominant [001] glide. Water contents in olivine are maximum (150 wt. ppm H2O) in peridotites equilibrated at ~ 160 km depth. Peridotites equilibrated below 180 km depth are, in contrast, almost dry. Lack of correlation between olivine mg# and water content indicates that the high water contents in olivine record re-hydration after the extensive partial melting, which produced the cratonic root. The vertical variation in water contents in olivine observed in the Kaapvaal peridotites may result from hydrogen addition or loss during extraction by the kimberlites. Comparison with magnetotelluric electrical conductivity data suggests, however, that the observed vertical variation of water contents in olivine may be representative of the present-day state of the Kaapvaal mantle, implying that extensive metasomatism resulted in hydration of the cratonic mantle at intermediate depths. The annealed microstructures of Kaapvaal peridotites indicate however that this metasomatism was not followed by remobilization of the cratonic root.
ISSN: 0024-4937

hal-00750328
https://hal.archives-ouvertes.fr/hal-00750328
DOI : 10.1016/j.lithos.2012.05.001

Éditeur(s) : HAL CCSD European Geosciences Union
Résumé : We designed a thermo-mechanical numerical model for fast-spreading mid-ocean ridge with variable viscosity, hydrothermal cooling, latent heat release, sheeted dyke layer, and variable melt intrusion possibilities. The model allows for modulating several accretion possibilities such as the "gabbro glacier" (G), the "sheeted sills" (S) or the "mixed shallow and MTZ lenses" (M). These three crustal accretion modes have been explored assuming viscosity contrasts of 2 to 3 orders of magnitude between strong and weak phases and various hydrothermal cooling conditions depending on the cracking temperatures value. Mass conservation (stream-function), momentum (vorticity) and temperature equations are solved in 2-D cartesian geometry using 2-D, alternate direction, implicit and semi-implicit finite-difference scheme. In a first step, an Eulerian approach is used solving iteratively the motion and temperature equations until reaching steady states. With this procedure, the temperature patterns and motions that are obtained for the various crustal intrusion modes and hydrothermal cooling hypotheses display significant differences near the mid-ocean ridge axis. In a second step, a Lagrangian approach is used, recording the thermal histories and cooling rates of tracers travelling from the ridge axis to their final emplacements in the crust far from the mid-ocean ridge axis. The results show that the tracer's thermal histories are depending on the temperature patterns and the crustal accretion modes near the mid-ocean ridge axis. The instantaneous cooling rates obtained from these thermal histories betray these discrepancies and might therefore be used to characterize the crustal accretion mode at the ridge axis. These deciphering effects are even more pronounced if we consider the average cooling rates occurring over a prescribed temperature range. Two situations were tested at 1275-1125 °C and 1050-850 °C. The first temperature range covers mainly the crystallization range that is characteristic of the high temperature areas in the model (i.e. the near-mid-oceanic-ridge axis). The second temperature range corresponds to areas in the model where the motion is mainly laminar and the vertical temperature profiles are closer to conductive. Thus, this situation results in less discriminating efficiency among the crustal accretion modes since the thermal and dynamic properties that are described are common to all the crustal accretion modes far from the ridge axis. The results show that numerical modeling of thermo-mechanical properties of the lower crusts may bring useful information to characterize the ridge accretion structure, hydrothermal cooling and thermal state at the fast-spreading ridges and may open discussions with petrological cooling rate results.
ISSN: 1991-959X

hal-00907012
https://hal.archives-ouvertes.fr/hal-00907012
DOI : 10.5194/gmd-6-1659-2013

Éditeur(s) : HAL CCSD AGU and the Geochemical Society
Résumé : International audience
The transition between the small melt lens observed on top of fast spreading ridge magma chambers and the overlying sheeted dike complex marks the interface between magma and the hydrothermal convective system. It is therefore critical to our understanding of fast spreading ridge accretion processes. We present maps of two areas of the Oman ophiolite where this transition zone is observed as continuous outcrops. Our observations, which include the base of the sheeted dike being crosscut by gabbros, are consistent with episodic dike injections in a steady state model but also suggest that the root of these dikes is commonly erased by vertical movements of the top of the melt lens. Dike assimilation is a possible mechanism for incorporating hydrated phases, which result from hydrothermal alteration, to the melt lens during upward migrations of its upper boundary. Upward migrations are also responsible for a granoblastic overprint of the root of the dikes that is also observed in the stoped diabase xenoliths. This granoblastic overprint attests to reheating of previously hydrothermally altered lithologies which can even trigger hydrous partial melting due to the lowering of the solidus of mafic lithologies by the presence of a water activity. Clinopyroxenes present in these granoblastic lithologies are typically low in Ti and Al content, thus strongly contrasting with corresponding magmatic clinopyroxene. This may attest to the recrystallization of clinopyroxenes after amphiboles under the peculiar conditions present at the root zone of the sheeted dike complex. Downward migrations of the top of the melt lens result in the crystallization of the isotropic gabbros at its roof, which represent the partly fossilized melt lens. Melt lens fossilization eventually occurs when magma supply is stopped or at the melt lens margins where the thermal conditions become cooler. Melt lens migration, recrystallization of hydrothermally altered sheeted dikes during reheating stages, and assimilation processes observed in the Oman ophiolite are consistent with the observations made in IODP Hole 1256D. We propose a general dynamic model in which the melt lens at fast spreading ridges undergoes upward and downward movements as a result of either eruption/replenishment stages or variations in the hydrothermal/magmatic fluxes.
ISSN: 1525-2027

hal-00445249
https://hal.archives-ouvertes.fr/hal-00445249
DOI : 10.1029/2009GC002652

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
Estimations of zenith total delays (ZTD) were obtained during postprocessing of a high-resolution (2.4 km) nonhydrostatic atmospheric model (Méso-NH). These estimations were used to determine their sensitivity with respect to formulations of atmospheric refractivity, the approximation of zenith hydrostatic delays (ZHD) deduced from ground pressure, and the contributions of hydrometeors. The factor k for the conversion of zenith wet delay (ZWD) to integrated water vapor (IWV) was examined. Méso-NH is applied here to the extreme flash flood event of 8–9 September 2002 in southeastern France. The use of the hydrostatic formulation (to infer ZHD) leads to an overestimation of up to 18 mm with respect to the vertical integration of refractivity. Delay contributions of hydrometeors simulated by the high-resolution model reached more than 70 mm (%11 kg/m 2 IWV) in the heart of the convective cells in the case of the extreme flood event. The mean variations of IWV due to the use of different conversion factors (k used to transform ZWD to IWV) are evaluated to be less than 0.3 kg/m 2. This is less than the mean underestimation of IWV by 0.6 kg/m 2 relative to the GPS-like evaluation of IWV using the hydrostatic formulation and the ground temperature. In this study we also use GPS ZTD observations to validate three different numerical simulations of this extreme flood event. The simulation with the best fit to the GPS observations is also in best agreement with the surface rainfall measurements.
ISSN: 2169-897X

hal-01417608
https://hal.archives-ouvertes.fr/hal-01417608
https://hal.archives-ouvertes.fr/hal-01417608/document
https://hal.archives-ouvertes.fr/hal-01417608/file/Brenot_JGR_2006.pdf
DOI : 10.1029/2004JD005726

Éditeur(s) : HAL CCSD
Résumé : Report
GPS, absolute gravity and GRACE satellite data have been combined to map postglacial rebound (glacial isostatic adjustment) and to identify large spatial-scale water storage variations in the Nelson River drainage basin. GPS data from 27 continuous sites over the period 1996-2010 with an average time-series length of 10.6 years were combined with data from over 50 regularlysurveyed monuments over the period 1995-2011 to produce an updated vertical velocity map for the basin.
https://hal.archives-ouvertes.fr/hal-00856668

hal-00856668
https://hal.archives-ouvertes.fr/hal-00856668
DOI : 10.4095/292189

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Seismic anisotropy originating within the continental crust is used to determine kinematic flow lines within active mountain belts and is widely attributed to regionally aligned mica. However, naturally deformed micaceous rocks commonly show composite (e.g. S-C) fabrics. It is necessary therefore to understand how both varying mica content and differing intensities of multiple foliations impact on seismic interpretations in terms of deformation fields. An outcrop analogue for granitic mid-crustal deformed zones is used here to calibrate the seismic response against both parameters. Seismic responses are modelled using crystallographic preferred orientations for polymineralic, micaceous granitic gneisses, measured using Electron Back-Scatter Diffraction. The sample results are generalised by modelling the effects of variations in modal composition and the relative importance of deformation fabrics of variable orientation, so-called rock and fabric recipes. The maximum P- and S-anisotropy are calculated at 16.6% and 23.9% for single-foliation gneisses but for mixed (i.e. S-C) foliation gneisses these values reduce to 5.8% and 7.5% respectively. Furthermore, mixtures of multiple foliations generate significant variations in the geometry of the seismic anisotropy. This effect, coupled with the geographical orientation of fabrics in nature. can generate substantial variations in the orientation and magnitude of seismic anisotropy (especially for shear waves) as measured for the continental crust using existing receiver function and teleseismic near-vertical incidence methods. Thus, maps of seismic anisotropy varying with depth in deforming continents need not imply necessarily depth-varying deformation kinematics and tectonic decoupling.
ISSN: 0012-821X

hal-00445247
https://hal.archives-ouvertes.fr/hal-00445247
DOI : 10.1016/j.epsl.2009.09.035

Éditeur(s) : HAL CCSD Oxford University Press (OUP)
Résumé : International audience
Our knowledge and understanding of the 3-D lithospheric structure of the Himalayas and the Tibetan Plateau is still challenging although numerous geophysical studies have been performed in the region. The GOCE satellite mission has the ambitious goal of mapping Earth's gravity field with unprecedented precision (i.e. an accuracy of 1-2 mGal for a spatial resolution of 100 km) to observe the lithosphere and upper-mantle structure. Consequently, it gives new insights in the lithospheric structure beneath the Himalayas and the Tibetan Plateau. Indeed, the GOCE gravity data now allow us to develop a new strategy for joint gravimetry-seismology inversion. Combined with teleseismic data over a large region in a joint inversion scheme, they will lead to lithospheric velocity-density models constrained in two complementary ways. We apply this joint inversion scheme to the Hi-CLIMB (Himalayan-Tibetan Continental Lithosphere during Mountain Building) seismological network which was deployed in South Tibet and the Himalayas for a 3-yr period. The large size of the network, the high quality of the seismological data and the new GOCE gravity data set allow us to image the entire lithosphere of this active area in an innovative way. We image 3-D low velocity and density structures in the middle crust that fit the location of discontinuous low S-velocity zones revealed by receiver functions in previous geophysical studies. In the deeper parts of our velocity model we image a positive anomaly interpreted to be the heterogenous Indian lithosphere vertically descending beneath the centre of the Tibetan Plateau.
ISSN: 0956-540X

hal-00858024
https://hal.archives-ouvertes.fr/hal-00858024
DOI : 10.1093/gji/ggs110

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
Seismic anisotropy has been widely studied this last decade, particularly by measuring splitting of vertically propagating core shear waves. The main interest in this technique is to characterize upper mantle flow beneath seismic stations. On the other hand, the major restriction in this method is that a single station gives a single anisotropy measurement. Alternative methods have been developed in order to avoid this restriction. An accurate determination of upper mantle seismic anisotropy beneath a seismic station may allow one, by doing anisotropy correction, to characterize remote or deeper anisotropy. The Geoscope network is ideal for this purpose because it is composed of a large set (about 26) of high-quality, broadband seismometers globally distributed and because some of these stations have run for more than 10 years and most of them for more than 5 years. We selected about 100 events at each site, generally of magnitude (m b) > 6.0, and we performed systematic measurements of the splitting parameters (fast polarization direction φ and delay time δt) on SKS, SKKS, and PKS phases. Splitting on oceanic islands has been difficult to observe owing to the low quality of the signal but also perhaps owing to complex upper mantle structures beneath the stations. Station KIP (Kipapa, Hawaii) in the Pacific is the only oceanic Geoscope station with a clear anisotropy. We determined well-constrained splitting parameters for 10 of the 17 continental stations that may be explained by a single anisotropic layer. The poor correlation between fast polarization directions and the absolute plate motion together with the apparent incoherence between the plate velocities and the observed delay times suggest that a simple drag-induced asthenospheric flow alone fails to explain most of the observations. For some stations located on or near major lithospheric structures (TAM, Tamanrasset, Algeria, for instance), we observe a good correlation between fast polarization directions and regional structures. At station SCZ (Santa Cruz, California), we found clear variations of the splitting parameters as a function of the event backazimuth, compatible with two layers of anisotropy. Three stations (CAN (Canberra), HYB (Hyderabad, India) and SSB (Saint Sauveur Badole, France)) seem to be devoid of detectable anisotropy.
ISSN: 2169-9313

hal-01388830
http://hal.univ-reunion.fr/hal-01388830
http://hal.univ-reunion.fr/hal-01388830/document
http://hal.univ-reunion.fr/hal-01388830/file/Barruol_anisoGeoscope_JGR1999.pdf
DOI : 10.1029/1999JB900033

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Deep-seated gravitational spreading (DSGS) affects the slopes of formerly glaciated mountain ridges. On Mars, DSGS has played a key role in shaping the landforms of the giant Valles Marineris troughs. Though less spectacular, DSGS is common in terrestrial orogens, where understanding its mechanics is critical in the light of the ongoing climate change because it is a potential source of catastrophic landslides in deglaciated valleys. We conducted parametric numerical studies in order to identify important factors responsible for DSGS initiation. DSGS models are computed using an elastoviscoplastic finite element code. Using ADELI's software, we reproduce topographic ridge spreading under the effect of valley unloading. Two types of spreading topographic ridges are investigated, homogeneous or with horizontal rheological layering. We find that gravitational instabilities are enhanced by high slopes, which increase gravitational stress, and low friction and cohesion, which decrease yield stress. In the unlayered ridge, instability is triggered by glacial unloading with plastic strain concentration inside the ridge and at the base of the high slopes. Vertical fractures develop in the upper part of the slope, potentially leading to fault scarps. Ridge homogeneity promotes a deformation mode controlled by uphill-facing normal faulting and basal bulging. In the second case, the ridge encompasses horizontal geological discontinuities that induce rock mass anisotropy. Discontinuity located at the base of the slope accumulates plastic strain, leading to the formation of a sliding plane evolving into a landslide. The presence of a weak layer at ridge base therefore promotes another slope deformation mode ending up with catastrophic failure. Mechanical conditions and slope height being equal, these conclusions can probably be extrapolated to Earth. Compared with Mars, DSGS on Earth is inhibited because terrestrial topographic gradients are lower than in Valles Marineris, an effect counterbalanced by increased gravitational stress, where the intensity of deformation is enhanced because of the Earth gravity potential.
ISSN: 0169-555X

hal-01420007
https://hal.archives-ouvertes.fr/hal-01420007
DOI : 10.1016/j.geomorph.2016.06.011

Éditeur(s) : HAL CCSD Wiley-Blackwell
Résumé : We use InSAR to measure deformation and kinematics of the Mw = 4.9 Borujerd (2005/05/03) and Mw = 6.1 Chalan-Chulan (2006/03/31) earthquakes that occurred in the Zagros fold-and-thrust belt. The focal mechanism of the 2006 event is consistent with right lateral strike-slip motion and the event ruptured the Dorud-Borujerd segment of the Main Recent Fault. An Envisat interferogram spanning the 2006 event shows peak ground deformation of 9 cm in the satellite line-of-sight along a 10 km long fault portion. The interferogram spanning the 2005 earthquake is rather related to atmospheric artefact than to ground deformation. Dislocation models of the 2006 Chalan-Chulan event indicate dextral slip amounting to a maximum of 90 cm at a depth of 4 km. The predicted vertical displacements are in good agreement with differential levelling data. The 2006 event filled only a small part of the seismic gap located between large M = 7 events that occurred in 1909 and 1957.
ISSN: 0954-4879

hal-00411313
https://hal.archives-ouvertes.fr/hal-00411313
DOI : 10.1111/j.1365-3121.2008.00797.x

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The interseismic velocity field provided by geodetic methods is generally interpreted in the framework of a thick elastic lithosphere with a slipping fault at depth. Because lateral variations of lithospheric rheology play a key role in determining the geological strain distribution, I examine the idea that interseismic strain rate variations also occur in response to lateral variations in the elastic thickness of the lithosphere. Using a stress balance principle and some simplifying assumptions, I show using a 1D model that elastic thickness is inversely proportional to strain rate for the simple case of pure strike-slip faulting. Elastic thickness computed on three profiles crossing the San Andreas fault system (SAFS) suggests that the distribution of interseismic strain rate is compatible with a thick elastic lithosphere in the Great Basin-Sierra Nevada province and on the Pacific plate. Conversely, a thin plate with a shallow asthenosphere is needed on the SAFS to explain its high strain rate. A 2.5D Finite Element model of interseismic strain in the Carrizo Plain region in Central California shows how known vertical and horizontal variations of elastic properties refine 1D model predictions. In a case of a multiple fault system, I point out that the interseismic velocity is not causally tied to faults slip rate. Therefore, analysing the velocity field across the SAFS cannot reliably provide faults slip rate distribution as previously claimed. Rather, the apparent correlation between geologic slip rate and interseismic strain may only indicate that the elastic thickness plays a dominant role in controlling fault strength. Finally, I suggest that interseismic geodetic strain could be a new way to infer effective elastic plate thickness on the continents.
ISSN: 0012-821X

hal-00412155
https://hal.archives-ouvertes.fr/hal-00412155
DOI : 10.1016/j.epsl.2008.01.046

Éditeur(s) : HAL CCSD Météo et Climat
Résumé : International audience
Le premier volet du projet Cyprim vise à mieux identifier les précurseurs des cyclogenèses et des précipitations intenses en région méditerranéenne. Cet article en présente les principaux résultats. Il est question des ingrédients météorologiques à l'origine de ces systèmes, de la grande à la mésoéchelle, des causes des fortes intensités, localisations et parfois stationnarité des récipitations associées. Le coeur de l'article présente des méthodes d'identification des anomalies de tourbillon potentiel liées à l'occurrence d'événements précipitants intenses et dresse une climatologie de ces anomalies. Les perspectives d'exploitation de cette information pour améliorer la qualité des prévisions sont évoquées. ENGLISH VERSION: The first part of the CYPRIM project (Cyclogenesis and intense precipitations in the Mediterranean region) aims at a better identification of the precursor structures of cyclogenesis and heavy precipitation in the Mediterranean region. This article presents the main results. It mentions the meteorological ingredients from which these systems originate from the large to themesoscale, the reasons for large intensities, the localization and sometimes stationarity of the associated precipitations. The heart of the article shows methods for identifiying potential vorticity anomalies involved in the occurrence of heavy precipitation events and sets up a climatology of these anomalies.The perspectives of the usefulness of this information for improving forecast quality are discussed.
ISSN: 0026-1181

insu-00448250
https://hal-insu.archives-ouvertes.fr/insu-00448250
DOI : 10.4267/2042/28828

Éditeur(s) : HAL CCSD American Geophysical Union (AGU)
Résumé : International audience
We decipher late-orogenic crustal flow characterized by feedback relations between partialmelting and deformation in the Variscan Montagne Noire gneiss dome. The dome shape and finite strainpattern of the Montagne Noire Axial Zone (MNAZ) result from the superimposition of three deformations(D1, D2 and D3). The early flat-lying S1 foliation is folded by D2 upright ENE-WSW folds and transposed in thecentral and southern part of the MNAZ into steep D2 high-strain zones consistent with D2 NW-SE horizontalshortening, in bulk contractional coaxial deformation regime that progressively evolved to noncoaxial dextraltranspression. The D2 event occurred under metamorphic conditions that culminated at 0.65 ± 0.05 GPa and 720± 20°C. Along the anatectic front S1 and S2 foliations are transposed into a flat-lying S3 foliation with top-to-NEand top-to-SW shearing in the NE and SW dome terminations, respectively. These structures define a D3 transitionzone related to vertical shortening during coaxial thinning with a preferential NE-SW to E-W directedstretching. Depending on structural level, the metamorphic conditions associated with D3 deformation rangefrom partial melting conditions in the dome core to subsolidus conditions above the D3 transition zone. Wesuggest that D2 and D3 deformation events were active at the same time and resulted from strain partitioningon both sides of the anatectic front that may correspond to a major rheological boundary within the crust.
ISSN: 0278-7407

hal-01208098
https://hal.archives-ouvertes.fr/hal-01208098

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
An exploration 3D seismic data set from the Gjallar Ridge off mid-Norway images a giant fluid seep structure 3 × 5 km wide, which connects to late Palaeocene magmatic sills at depth. Two of the pipes that have developed as hydrothermal vents reach all the way to the modern seafloor implying that they either were active much longer than the original hydrothermal activity or have been reactivated. We combine detailed seismic analysis of the northern pipe and sandbox modeling to constrain pipe initiation and propagation. Although both the seismic data and the sandbox models suggest that fluids at depth are focused through a vertical conduit, sandbox models show that fluids ascend and reach a critical depth migration where focused migration abruptly transforms into distributed fluid flow through unconsolidated sediments. This indicates that at this level the sediments are intensely deformed during pipe propagation, creating a V-shaped structure, i.e. an inverted cone at depth and a positive relief anomaly, 5 to 10 m high, at the seafloor, which is clearly identified on 3D seismic data. Comparison of the geometries observed in sandbox modeling with the seismically observed geometries of the Giant Gjallar Vent suggests that the Giant Gjallar Vent may be a proto-fluid seep at an early stage of its development, preceding the future collapse of the structure forming a seafloor depression. Our results imply that the Gjallar Giant Vent can be used as a window into the geological processes active in the deep parts of the Vøring Basin.
ISSN: 0025-3227

hal-00772465
https://hal.archives-ouvertes.fr/hal-00772465
DOI : 10.1016/j.margeo.2012.08.010

Éditeur(s) : HAL CCSD Copernicus Publications on behalf of the European Geosciences Union
Résumé : International audience
During the GWADASEIS cruise (Lesser Antilles volcanic arc, February–March 2009) a very high resolution (VHR) seismic-reflection survey was performed in order to constrain Late Quaternary to Present faulting. The profiles we obtained evidence frequent " ponding " of reworked sediments in the deepest areas, similar to the deposition of Mediterranean " homogenites ". These bodies are acoustically transparent (few ms t.w.t. thick) and are often deposited on the hanging walls of dominantly normal faults, at the base of scarps. Their thickness appears sufficient to compensate (i.e. bury) co-seismic scarps between successive earthquakes, resulting in a flat and horizontal sea floor through time. In a selected area (offshore Montserrat and Nevis islands), piston coring (4 to 7 m long) was dedicated to a sedimento-logical analysis of the most recent of these particular layers. It corresponds to non-stratified homogenous calcareous silty sand (reworked calcareous plankton and minor volcanoclas-tics). This layer can be up to 2 m thick, and overlies fine-grained hemipelagites. The upper centimeters of the latter represent the normal RedOx water/sediment interface. 210 Pb and 137 Cs activities lack in the massive sands, while a normal profile of unsupported 210 Pb decrease is observed in the hemipelagite below, together with a 137 Cs peak corresponding to the Atmospheric Nuclear Experiments (1962). The RedOx level was thus capped by a recent instantaneous major sedimentary event considered as post-1970 AD; candidate seismic events to explain this sedimentary deposits are either the 16 March 1985 earthquake or the 8 October 1974 one (M w = 6.3 and M w = 7.4, respectively). This leads to consider that the syntectonic sedimentation in this area is not continuous but results from accumulation of thick homogen-ites deposited after the earthquakes (as observed in the following weeks after Haiti January 2010 event, McHugh et al., 2011). The existence of such deposits suggests that, in the area of study, vertical throw likely results from cu-mulated effects of separated earthquakes rather than from aseismic creep. Examination of VHR profiles shows that all major co-seismic offsets are recorded in the fault growth sequence and that co-seismic offsets can be precisely estimated. By using a sedimentation rate deduced from 210 Pb decrease curve (0.5 mm yr −1) and taking into account minor reworking events detected in cores, we show that the Redonda system may have been responsible for five > M 6 events during the last 34 000 yr. The approach presented in this work differs from fault activity analyses using displaced sets of isochronous surfaces and postulating co-seismic offsets. Combining VHR seismic imagery and coring we can decipher co-seismic vs. slow continuous displacement, and thus actually estimate the amplitude and the time distribution of major co-seismic offsets.
Natural Hazards and Earth System Science

insu-01585969
https://hal-insu.archives-ouvertes.fr/insu-01585969
https://hal-insu.archives-ouvertes.fr/insu-01585969/document
https://hal-insu.archives-ouvertes.fr/insu-01585969/file/nhess-12-1755-2012-beck.pdf
DOI : 10.5194/nhess-12-1755-2012

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
We compare a global compilation of shear-wave splitting measurements with azimuthal seismic anisotropy parameters inferred from surface-wave tomography. The currently available splitting dataset is taken from a novel comprehensive collection of available publications that is updated interactively online. The comparison between the two types of data is made by calculating predicted splitting parameters from the anisotropic tomography model. Comparing these predicted splitting parameters with the observed ones, we find a considerable correlation between the two datasets at global scale. This result is noteworthy, since such correlation did not seem to exist in previous studies. The spatial resolution associated with the two types of methods is rather different. While surface waves have good vertical resolution and poor lateral resolution of several hundreds of kilometers, SKS splitting measurements have good lateral, but poor vertical resolution. The correlation can be understood in light of recent propositions that anisotropy seen by SKS splitting constrains mostly the upper mantle, and therefore a similar depth region as surface waves. The correlation also confirms the generally good quality of the shear-wave measurements, as well as that of the anisotropic tomography model.
ISSN: 0031-9201

hal-00429396
https://hal.archives-ouvertes.fr/hal-00429396
https://hal.archives-ouvertes.fr/hal-00429396/document
https://hal.archives-ouvertes.fr/hal-00429396/file/Wuestefeld_SKS_SW_correlation_PEPI2009-hal.pdf
DOI : 10.1016/j.pepi.2009.05.006

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
We present results of a geomorphological and morphotectonic analysis of the northeastern part of the Rif. We show that the present day kinematics of the Rif is characterized by active deformation along the Trougout and Nekor faults in the North-East. Digital Elevation Models of offset drainage features (streams, fluvial terraces) allow determining a normal-left-lateral motion along the Trougout fault and a left-lateral strike-slip motion along the Nekor fault. Preliminary 3He cosmogenic dates of tectonic markers yield vertical and horizontal slip rates of ∼0.9 mm/yr and ∼0.5 mm/yr, respectively along the Trougout fault. The present-day localized transtension seen in the north-eastern Rif morphology (Ras Tarf) is coeval with uplifted marine terraces near the Al Hoceima Bay. U/Th dating of shells yield an average uplift rate of ∼0.2 mm/yr during the past 500 ka. These data show that active transtension in the northeastern Rif is also associated with uplift. These new morphotectonic constraints are consistent with the GPS measurements showing southwestward overall motion of most of the Rif belt with respect to stable Africa.
ISSN: 0264-3707

hal-01053492
https://hal.archives-ouvertes.fr/hal-01053492
DOI : 10.1016/j.jog.2014.01.004