Éditeur(s) : HAL CCSD Springer Verlag
Résumé : International audience
Ecosystems are commonly affected by natural, episodic disturbances that can abruptly and drastically alter communities. Although it has been shown that resilient ecosystems can eventually recover to pre-disturbed states, the extent to which communities in early stages of recovery could be affected by multiple anthropogenic stressors is poorly understood. Pervasive and rising anthropogenic stressors in coastal marine systems that could interactively affect the recovery of these systems following natural disturbances include high sedimentation, nutrient enrichment, and overfishing. Using a 6-month field experiment, we examined the effects of all combinations of these three stressors on key functional groups in the benthic community growing on simulated, post-disturbance reef patches within a system recovering from large-scale natural disturbances (corallivorous seastar outbreak and cyclone). Our study revealed that sedimentation, nutrient enrichment, and overfishing (simulated using exclusion cages) interactively affected coral survival and algal growth, with taxon-specific effects at multiple scales. First, our treatments affected corals and algae differently, with sedimentation being more detrimental to macroalgal growth but less detrimental to coral (Porites rus) survival in caged plots, driving significant interactions between sedimentation and caging for both taxa. We also observed distinct responses between coral species and between algal functional groups, with the most extensive responses from algal turf biomass, for which sedimentation suppressed the synergistic (positive) combined effect of nutrient enrichment and caging. Our findings suggest that different combinations of ubiquitous anthropogenic stressors, related to either sea- or land-based activities, interactively influence community recovery from disturbance and may alter species compositions in the resulting community. Our findings further suggest that anthropogenic stressors could promote further degradation of coral reefs following natural disturbances by inhibiting recovery to coral-dominated states that provide vital ecosystem services to coastal populations worldwide.
ISSN: 0722-4028

hal-01430977
https://hal-univ-perp.archives-ouvertes.fr/hal-01430977
DOI : 10.1007/s00338-016-1489-x

Éditeur(s) : HAL CCSD
Résumé : Guadeloupe Island (West French Indies) is one of the twenty islands that compose the Lesser Antilles Arc, which results from the subduction of the Atlantic Ocean plate beneath the Caribbean one. The island lies in a complex volcano-tectonic system and the need to understand its geological context has led to numerous on- and offshore geophysical investigations. This work presents the compilation and processing of available, on-land, airborne and marine, gravity and magnetic data acquired during the last 40 years on Guadeloupe Islands and at the scale of the Lesser Antilles Arc. The overall dataset provides new Bouguer and reduced to the pole magnetic anomaly maps at the highest achievable resolution. Regionally, the main central negative gravity trend of the arc allows defining two subsident areas. The first one is parallel to the arc direction (~N160°E) to the north, whereas the second unexpected southern one is oriented parallel to oceanic ridges (N130°E). Along the Outer Arc, the long wavelength positive anomaly is interpreted, at least along the Karukera Spur, as an up-rise of the volcanic basement in agreement with the seismic studies. To the NE of Guadeloupe, the detailed analysis of the geophysical anomalies outlines a series of structural discontinuities consistent with the main bathymetric morphologies, and in continuity of the main fault systems already reported in this area. Based on geophysical evidences, this large scale deformation and faulting of the Outer Arc presumably primarily affects the Atlantic subducting plate and secondarily deforms the upper Caribbean plate and the accretion prism. At the scale of Guadeloupe Island, joined gravity and magnetic modeling has been initiated based on existing interpretation of old seismic refraction profiles, with a general structure in three main layers. According to our geophysical anomalies, additional local structures are also modeled in agreement with geological observations: i) the gravity and magnetic signals confirm an up-rise of the volcanic basement below the limestone platforms outcropping on Grande-Terre Island ; ii) the ancient volcanic complexes of Basse-Terre Island are modeled with high density and reverse magnetized formations; iii) the recent volcanic centre is associated with formations consistent with the low measured density and the underlying hydrothermal system. The EW models coherently image a NNW-SSE depression structure in half-graben beneath Basse-Terre Island, its western scarp following the arc direction in agreement with bathymetric and seismic studies to the north of the island. The so-defined depressed area, and particularly its opening in half-graben toward the SW, is interpreted as the present-day front of deformation of the upper plate associated with the recent volcanic activity on and around Guadeloupe. Based on this regional deformation model, perspectives are given for further integrated investigation of key targets to address the internal structure and evolution of the Lesser Antilles Arc and Guadeloupe volcanic system.
Colloque 2012 du Comité National Français de Géodésie et Géophysique (CNFGG)
Clermont-Ferrand, France

hal-00742653
https://hal-brgm.archives-ouvertes.fr/hal-00742653
https://hal-brgm.archives-ouvertes.fr/hal-00742653/document
https://hal-brgm.archives-ouvertes.fr/hal-00742653/file/CNFGG_Caraibes.pdf

Éditeur(s) : Ecole Nationale Supérieure Agronomique de Rennes (ENSAR)
Résumé : Artificial Fish Aggregating Devices (FADs) are known to concentrate tropical tunas. This aggregative behaviour drastically increases the vulnerability of these species to fishing. Alternatively, FADs can be used as oceanic observatories to study the aggregative behaviour of large pelagic fish. We conducted sea surveys in Martinique (Lesser Antilles) to i) establish a typology of the pelagic fish aggregations found around moored FADs ii) study their relations with their biotic and abiotic environment and the local fishery. The mean biomass of large pelagic fish aggregations was also estimated to provide scientific inputs to achieve a sustainable management of the moored FAD fishery. The first part presents the background of the study. We introduce the regional pelagic ecosystem, the aggregative behaviour of pelagic fish around FADs and the Martinican moored FAD fishery. The second part begins with a presentation of the conceptual framework of the study: the hierarchy theory. Observation scales and survey methodology are therefore described. Repeated echosounder surveys run in a star pattern were conducted around 2 moored FADs, in combination with underwater video observations, classical fishing experiments and CTD profiles. In the third part, the elements of the [moored FAD ¿ pelagic fish - environment - fishing] system and their interactions are numerically characterised in the vertical plane. The main type of pelagic fish aggregation was a large aggregation distributed in sub-surface (40-100 m) within a radius of 400 m of the FAD. This aggregation was mostly made of 60 cm FL blackfin tunas (Thunnus atlanticus). It appeared at sunrise and mostly spread away in the late afternoon. It was observed during all daytime surveys. The average density and the vertical structure of the micronektonic sound scattering layers (SSLs) were assessed locally around a FAD for 48h cycles. These SSLs descriptors showed positive correlation with the size and the abundance of the sub-surface tuna aggregation. Whereas this aggregation accounted for about 95% of the total biomass aggregated around a moored FAD, it was nearly unexploited by the local commercial fishermen. The fourth part focuses on the sub-surface tuna aggregation. A high variability of the spatial distribution of the aggregation was evidenced in the horizontal plane at daily, day to day and monthly temporal scales. These variations were related to fluctuations of the global abundance of the aggregation. The daytime average density of sub-surface tuna was modelled as a function of the distance to FAD, within an advection-diffusion framework. Based on these results, a universal kriging model was designed to assess the mean maximum daily biomass of the sub-surface tuna aggregation. This mean biomass estimate yielded 11 tons with an estimation error of 26%. To conclude, we present a hierarchical organization in space and time of a sub-surface tuna population distributed within a network of moored FADs, from micro to meso-scale. We suggest that the spatial distribution of tunas can be explained from fine to coarse-scales by behavioural processes (self-organization, feeding, aggregative behaviour) whereas their spatial distribution is mainly forced by environmental processes at broader scales.
L'utilisation de Dispositifs de Concentration de Poissons permet de provoquer la formation de larges agrégations de thonidés autour de dispositifs artificiels, ce qui augmente considérablement la vulnérabilité de ces ressources vis-à-vis de l'exploitation halieutique. Les DCP peuvent également être utilisés en tant qu'observatoires océaniques, afin d'étudier le comportement agrégatif du macronecton pélagique. Nous avons ainsi réalisé des observations autour de DCP ancrés en Martinique, afin de définir une typologie des agrégations de macronecton et de étudier leurs relations avec leur environnement biotique, abiotique et l'exploitation halieutique locale. Nous avons ensuite estimé la biomasse moyenne de macronecton agrégé autour d'un DCP ancré, afin de fournir des éléments scientifiques nécessaires à une gestion durable de ces ressources. La première partie présente le contexte de l'étude i.e. l'écosystème pélagique régional, le phénomène d'agrégation du macronecton autour des DCP et la pêche associée aux DCP ancrés en Martinique. La deuxième partie introduit la théorie de la hiérarchie qui a fourni le cadre conceptuel de l'étude et présente les échelles et méthodes d'observation. Le principal outil d'observation est un échosondeur scientifique, mis en oeuvre le long de parcours en étoile autour du DCP. Les prospections acoustiques ont été combinées à des observations vidéo sous marines, des pêches expérimentales et un suivi in-situ de l'environnement abiotique. La troisième partie présente une typologie des éléments constituant le système [DCP ancré - macronecton - environnement - pêche] dans le plan vertical et précise leurs interactions. Le type d'agrégation de macronecton dominant est une grande agrégation composée d'une majorité de thons noirs (Thunnus atlanticus) de taille moyenne (60 cm) distribuée en sub-surface (40-100 m), dans un rayon de 300 m autour de la tête des DCP. Cette agrégation se forme au lever du soleil et se disperse presque totalement dans l'après midi. Elle a été observée de jour lors de toutes les campagnes. Une corrélation positive entre la densité et la structure moyenne des couches micronectoniques diurnes évaluée localement autour du DCP au cours de 48 h et les dimensions et l'énergie acoustique de l'agrégation de thons de subs-surface a été mise en évidence. Malgré le fait que cette agrégation représente en moyenne 95 % de l'énergie acoustique du macronecton autour des DCP, elle est presque inexploitée par les pêcheurs artisans locaux. La quatrième partie met en évidence les fortes variations conjointes de la distribution spatiale dans le plan horizontal de la densité de l'agrégation de thons de sub-surface et de son abondance globale. Ces variations ont été observées au cours du cycle nycthéméral et aux échelles inter-journalières et mensuelles. La distribution spatiale moyenne de la densité diurne de l'agrégation en fonction de la distance au centre de gravité de l'agrégation est cependant très stable et peut être modélisée au moyen d'une équation d'advection-diffusion. Un modèle de krigeage universel, utilisant les résultats du modèle d'advection-diffusion, a permis d'évaluer la biomasse maximale journalière moyenne de l'agrégation de thons de sub-surface à une dizaine de tonnes, avec un coefficient de variation d'estimation de 26%. Nous proposons une représentation hiérarchique synthétique de la distribution spatiale d'une sous-population de thons dans un réseau de DCP ancrés de la micro à la méso-échelle. Nous suggérons que la distribution spatiale des thons est déterminée principalement à l'échelle fine (100m-1km) et à l'échelle grossière (1-10 km) par des processus comportementaux (auto-organisation, agrégation, nutrition) et par des processus environnementaux à échelle plus large.

Droits : info:eu-repo/semantics/openAccess
http://archimer.ifremer.fr/doc/2006/these-1735.pdf
http://archimer.ifremer.fr/doc/2006/sup-1735.pdf
http://archimer.ifremer.fr/doc/00000/1735/

Éditeur(s) : HAL CCSD
Résumé : Ce travail traite de " l'identification de plantes à partir d'images numériques, par champs de gradients ", provenant de capteurs de types variés. Nous avons choisi des méthodes de type global, afin de pré-segmenter efficacement l'image d'une plante. Parmi ces méthodes, celle du Mean Shift permet de s'acquitter des tâches de paramétrisation, mais présente l'inconvénient d'une forte complexité de calcul. Nous proposons deux méthodes pour résoudre ce problème : le Mean Shift avec changement d'échelle et le Mean Shift Markovien dont le but est de limiter le traitement systématique de tous les pixels par la partie Mean Shift. L'application de ces méthodes permet d'obtenir une partition de l'image dans laquelle on recherche les groupes de pixels, matérialisant les parties d'une plante focalisée par le photographe. Pour mettre en évidence ces zones, nous exploitons : la netteté des formes, la position et la densité spatiale des objets dans une image, afin de construire des masques qui représentent les parties d'une plante. À partir de ces masques, nous extrayons un ensemble de caractéristiques issu de la botanique descriptive, regroupé en trois catégories : la colorimétrie, la morphologie et le structurel. Nos choix méthodologiques sont expérimentés sur une base de données d'images, pour obtenir un ensemble de valeurs de caractéristiques appelées descripteurs. Ces descripteurs sont fournis à un système de classeurs basé sur des algorithmes génétiques, afin d'obtenir des règles désignant chaque type de plantes. L'objectif de ces règles est d'associer un score de ressemblance à chaque image de la base de données, en fonction de l'image soumise comme requête au système de reconnaissance.
Journées d'Études et de recherche des Antilles et de la Guyane
Pointe-à-Pitre, Guadeloupe

hal-00637788
https://hal.archives-ouvertes.fr/hal-00637788

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
We develop a block model for the Aegean and surrounding areas, constrained by Global Positioning System (GPS), in order to investigate the degree of coupling on the Hellenic subduction interface (i.e., the fraction of the motion across the plate boundary accommodated by elastic strain accumulation). We use previously published models, and seismicity to define the geometry of the interface separating the down-going Nubian slab from the overriding Aegean. This model provides a good fit to the GPS observations; for the ∼200,000 km2 Aegean block the wrms of the residual velocities is 1.4 mm/yr for 80 GPS velocity estimates, approximately the 95% level of the GPS velocity uncertainties. We investigate the degree of coupling on the seismically active plate interface, the Hellenic trench splay fault (believed to be the source of the 365 AD Great Crete Earthquake and Tsunami), and the Kephalonia transform fault by comparing the modeled GPS residual velocity field for a range of coupling values. The GPS observations are almost insensitive to coupling on the Kephalonia transform fault, because of the vertical dip of the fault that creates interseismic deformation only close to the fault where few GPS sites exist. The absence of resolvable shortening of the leading edge of the Aegean Plate precludes coupling of more than 0.2 (20% of the full Nubia-Aegean convergence rate) on the modeled plate interface. Because of the shallow dip of the plate interface and trench splay fault, and high rate of convergence, if these boundaries were fully coupled, high elastic strain rates would be expected to extend well into the overriding Aegean plate. Based on our preferred value for the degree of coupling (0.1), and assuming characteristic earthquake behavior, we estimate a recurrence time for great earthquakes with slip similar to that for the 365 Crete event of 5700-8300 yr, consistent with the absence of subsequent great earthquakes on this segment of the subduction zone.
ISSN: 0012-821X

hal-01053486
https://hal.archives-ouvertes.fr/hal-01053486
DOI : 10.1016/j.epsl.2013.10.018

Éditeur(s) : HAL CCSD Geological Society of London
Résumé : The Zagros Simply Folded Belt (ZSFB) is an active fold-and-thrust belt resulting from the still continuing continental collision between the Arabian plate and the Iranian plate, which probably started in the Oligocene. The present-day shortening (N25°) is well documented by focal mechanisms of earthquakes and global positioning system (GPS) surveys. We propose in this study a comparison of published palaeostress markers, including magnetic fabric, brittle deformation and calcite twinning data. In addition, we describe the magnetic fabric from Palaeocene carbonates (10 sites) and Mio-Pliocene clastic deposits (15 sites). The magnetic fabrics are intermediate, with magnetic foliation parallel to the bedding, and a magnetic lineation mostly at right angles to the shortening direction. This suggests that the magnetic fabric retains the record of an early layer-parallel shortening (LPS) that occurred prior to folding. The record of LPS allows the identification of originally oblique folds such as the Mand Fold, which have developed in front of the Kazerun Fault. The shape parameter of the magnetic fabric indicates a weak strain compatible with the development of detachment folds in the ZSFB. The palaeostress datasets, covering the Palaeocene to Pleistocene time interval, support several folding episodes accompanied by a counter-clockwise rotation of the stress field direction. The Palaeocene carbonates in the ZSFB record a N47 LPS during early to middle Miocene detachment folding in the High Zagros Belt (HZB). The Mio-Pliocene clastic deposits recorded a N38 LPS prior to and during detachment folding within the ZSFB at the end of the Miocene-Pliocene. Similarly, fault slip and calcite twin data from the ZSFB also support a counter-clockwise rotation from NE to N20 between the pre-folding stage and the late rejuvenation of folds. This counter-clockwise trend of palaeostress data agrees with fault slip data from the HZB. During the late stage of folding in the ZSFB, the Plio-Quaternary palaeostress trends are consistently parallel to the present-day shortening direction.
Tectonic and stratigraphic evolution of Zagros and Makran during the Mesozoic-Cenozoic

hal-00545036
https://hal.archives-ouvertes.fr/hal-00545036
DOI : 10.1144/SP330.6

Éditeur(s) : HAL CCSD Elsevier
Résumé : A synthesis of backscatter imagery coupled with a large 3D seismic dataset in the Lower Congo Basin (LCB) reveals a patchy distribution of features interpreted to be associated with fluid seepage from 300 m to 2500 m water depth. With the exception of one region of anomalous backscatter positive-relief mounds, all inferred seep sites occur in negative-relief pockmarks. The extensive 3D seismic dataset in the LCB offers a unique opportunity to study the plumbing system that is feeding surface cold seep systems, and in general, to reconstruct the relationship between tectonics and fluid flow in continental margins. The fluid seeps in the LCB are associated with morphologically, stratigraphically or tectonically controlled focused fluid flow. The integration of the geophysical datasets, backscatter imagery coupled to 3D seismic, clearly indicates that fluid seeps are not randomly distributed, but their seabed organization reflects 1) the location of the underlying structure (reservoir or trap) where the fluids are coming from, 2) the geometry and morphology of the reservoir/trap, and 3) the discontinuities in the sedimentary column along which fluids have migrated. In the LCB seafloor pockmarks are always associated with underlying tectonic structures (fault zones, salt diapirs, polygonal faults) or buried sedimentary bodies (turbiditic channels, erosional surfaces), whereas they never occur above sub-horizontal parallel-stratified fine-grained sediments. Even if triggering processes can not be clearly defined here, we propose a model of seafloor fluid seep organization, which represents a new tool for identifying the geometry of flow pathways and the underlying buried bodies where the fluids are originating from. This qualitative 3D model provides insight into the geohydrologic processes of continental margins.
ISSN: 0025-3227

hal-00406640
https://hal.archives-ouvertes.fr/hal-00406640
DOI : 10.1016/j.margeo.2007.06.003

Éditeur(s) : HAL CCSD European Geosciences Union
Résumé : International audience
Impact of GPS (Global Positioning System) data assimilation is assessed here using a high-resolution numerical weather prediction system at 2.5 km horizontal resolution. The Zenithal Tropospheric Delay (ZTD) GPS data from mesoscale networks are assimilated with the 3DVAR AROME data assimilation scheme. Data from more than 280 stations over the model domain have been assimilated during 15-day long assimilation cycles prior each of the two studied events. The results of these assimilation cycles show that the assimilation of GPS ZTD with the AROME system performs well in producing analyses closer to the ZTD observations in average. Then the impacts of assimilating GPS data on the precipitation forecast have been evaluated. For the first case, only the AROME runs starting a few hours prior the triggering of the convective system are able to simulate the convective precipitation. The assimilation of GPS ZTD observations improves the simulation of the spatial extent of the precipitation, but slightly underestimates the heaviest precipitation in that case compared with the experiment without GPS. The accuracy of the precipitation forecast for the second case is much better. The analyses from the control assimilation cycle provide already a good description of the atmosphere state that cannot be further improved by the assimilation of GPS observations. Only for the latest day (22 November 2007), significant differences have been found between the two parallel cycles. In that case, the assimilation of GPS ZTD allows to improve the first 6 to 12 hours of the precipitation forecast.
ISSN: 0992-7689

hal-00403847
https://hal.archives-ouvertes.fr/hal-00403847
https://hal.archives-ouvertes.fr/hal-00403847/document
https://hal.archives-ouvertes.fr/hal-00403847/file/angeo-27-2739-2009.pdf

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
Probabilistic seismic hazard analyses (PSHA) are commonly based on frequency magnitude statistics from 50-100 yearlong earthquake catalogs, assuming that these statistics are representative of the longer-term frequency of large earthquakes. We test an alternative PSHA approach in continental western Canada, including adjacent areas of northwestern U. S. A., using regional strain rates derived from 179 Global Positioning System (GPS) horizontal velocities. GPS strain rates are converted to earthquake statistics, seismic moment rates, and ground shaking probabilities in seismic source zones using a logic-tree method for uncertainty propagation. Median GPS-based moment rates and shaking estimates agree well with those derived from earthquake catalogs in only two zones (Puget Sound and mid-Vancouver Island). In most other zones, median GPS-based moment rates are 6-150 times larger than those derived from earthquake catalogs (shaking estimates 2-5 times larger), although the GPS-based and catalog estimates commonly agree within their 67% uncertainties. This discrepancy may represent an under-sampling of long-term moment rates and shaking by earthquake catalogs in some zones; however a systematic under-sampling is unlikely over our entire study area. Although not demonstrated with a high confidence level, long-term regional aseismic deformation may account for a significant part of the GPS/catalog discrepancy and, in some areas, represent as much as 90% of the total deformation budget. In order to integrate GPS strain rates in PSHA models, seismic versus aseismic partitioning of long-term deformation needs to be quantified and understood in terms of the underlying mechanical processes.
ISSN: 0148-0227

hal-00689004
https://hal.archives-ouvertes.fr/hal-00689004
DOI : 10.1029/2011JB008213

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The interseismic velocity field provided by geodetic methods is generally interpreted in the framework of a thick elastic lithosphere with a slipping fault at depth. Because lateral variations of lithospheric rheology play a key role in determining the geological strain distribution, I examine the idea that interseismic strain rate variations also occur in response to lateral variations in the elastic thickness of the lithosphere. Using a stress balance principle and some simplifying assumptions, I show using a 1D model that elastic thickness is inversely proportional to strain rate for the simple case of pure strike-slip faulting. Elastic thickness computed on three profiles crossing the San Andreas fault system (SAFS) suggests that the distribution of interseismic strain rate is compatible with a thick elastic lithosphere in the Great Basin-Sierra Nevada province and on the Pacific plate. Conversely, a thin plate with a shallow asthenosphere is needed on the SAFS to explain its high strain rate. A 2.5D Finite Element model of interseismic strain in the Carrizo Plain region in Central California shows how known vertical and horizontal variations of elastic properties refine 1D model predictions. In a case of a multiple fault system, I point out that the interseismic velocity is not causally tied to faults slip rate. Therefore, analysing the velocity field across the SAFS cannot reliably provide faults slip rate distribution as previously claimed. Rather, the apparent correlation between geologic slip rate and interseismic strain may only indicate that the elastic thickness plays a dominant role in controlling fault strength. Finally, I suggest that interseismic geodetic strain could be a new way to infer effective elastic plate thickness on the continents.
ISSN: 0012-821X

hal-00412155
https://hal.archives-ouvertes.fr/hal-00412155
DOI : 10.1016/j.epsl.2008.01.046

Éditeur(s) : HAL CCSD Elsevier
Résumé : We present the hierarchical matrix (H-matrix) technique combined with the adaptive cross-approximation (ACA) applied to a three-dimensional (3D) elastostatic problem using the boundary element method (BEM). This is used in structural geology and geomechanics for the evaluation of the deformation and perturbed stress field associated with surfaces of displacement discontinuity. Such optimization significantly reduces (i) the time and memory needed for the resolution of the system of equations, but more importantly (ii) the time needed for the post-processing at observation points where the deformation and the perturbed stress field are evaluated. Specifically, it is shown that the H-matrix structure used with the ACA, clearly captures the kernel smoothness during the post-processing stage according to the field point positions, and optimizes the computation accordingly. Combined with the parallelization on multi-core processors, this technique allows intensive computations to be done on personal desktop and laptop computers. Numerical simulations are presented, showing the advantages of such optimizations compared to the standard method.
ISSN: 0955-7997

hal-00561032
https://hal.archives-ouvertes.fr/hal-00561032
DOI : 10.1016/j.enganabound.2009.10.016

Éditeur(s) : HAL CCSD BioMed Central
Résumé : International audience
Background: Access to health care is a global public problem. In French Guiana, there exists social inequalities which are specially marked amongst immigrants who make up a third of the population. Health care inequalities are prevalent. The objective of this study was to determine factors associated with why health care amongst the poor population of Cayenne was renounced.Study design The study was cross sectional. It focused on knowledge, attitudes, practices and beliefs of the population living in poor neighborhoods of the Cayenne area. Methods: Populations coming at the Red Cross mobile screening unit in poor urban areas of Cayenne were surveyed from July 2013 to June 2014. Structured questionnaires consisted of 93 questions. Written informed consent was requested at the beginning of the questionnaire. The predictors for renouncing medical care were determined using logistic regression models and tree analysis. Results: Twenty percent of persons had renounced care. Logistic regression showed that renouncement of health care was negatively associated with having no regular physician Adjusted Odds Ratio (AOR)=0.43 (95%CI=0.24-0.79) and positively associated with being embarrassed to ask certain questions AOR=6.81 (95%CI=3.98-11.65) and having been previously refused health care by a doctor AOR=3.08 (95%CI=1.43-6.65) . Tree analysis also showed that three of these variables were linked to renouncement, with feeling shy to ask certain questions as the first branching.Conclusion: Although most people felt it was easy to see a doctor, one in five had renounced health care. The variables identified by the models suggest vulnerable persons generally had previous negative encounters with the health system and felt unwanted or non eligible for healthcare. Health care mediation and welcoming staff may be simple solutions to the above problems which were underscored in our observations.
ISSN: 1472-6963

hal-01288656
https://hal.archives-ouvertes.fr/hal-01288656
https://hal.archives-ouvertes.fr/hal-01288656/document
https://hal.archives-ouvertes.fr/hal-01288656/file/Predictive%20factors%20for%20renouncing%20to%20care%20in%20FG.pdf
PUBMEDCENTRAL : PMC4731954

Éditeur(s) : HAL CCSD AGU and the Geochemical Society
Résumé : International audience
Analysis of short-term deformation along the southern part of Dead Sea Fault (DSF) provides a systematic view of kinematics this part of the continental transform. The southern DSF consists of two principal segments: the Wadi Araba and Jordan Valley faults. In addition to other regional continuous GPS data, this study uses new data from 25 survey sites and 4 continuous GPS stations in Jordan for improved near-field observations. Resulting velocities are reported with 1-sigma uncertainties ranging from 0.4-1.0 mm/yr. Application of elastic dislocation models yields estimates of slip rates for Wadi Araba and Jordan Valley faults are 4.9 +/- 0.4 mm/yr and 4.7 +/- 0.4 mm/yr, respectively. Modeling also suggests different depths of effective fault locking with 15 +/- 5 km and 8 +/- 5 km for the Wadi Araba and Jordan Valley faults, respectively. These slip rates are generally consistent with the upper end of the range of slip rates estimated from late Quaternary geology. Spatial variations in effective fault locking generally correspond with a heterogeneous mantle lithosphere. A similar observation can be observed along the southern San Andreas Fault, and this may reflect the influence of heterogeneity in the uppermost mantle on crustal faulting processes.
ISSN: 1525-2027

hal-00689031
https://hal.archives-ouvertes.fr/hal-00689031
DOI : 10.1029/2011GC003736

Éditeur(s) : HAL CCSD Oxford University Press (OUP)
Résumé : International audience
No major earthquake occurred in North Chile since the 1877 Mw 8.6 subduction earthquake that produced a huge tsunami. However, geodetic measurements conducted over the last decade in this area show that the upper plate is actually deforming, which reveals some degree of locking on the subduction interface. This accumulation of elastic deformation is likely to be released in a future earthquake. Because of the long elapsed time since 1877 and the rapid accumulation of deformation (thought to be 6-7 cm yr−1), many consider this area is a mature seismic gap where a major earthquake is due and seismic hazard is high. We present a new Global Positioning System (GPS) velocity field, acquired between 2008 and 2012, that describes in some detail the interseismic deformation between 18°S and 24°S. We invert for coupling distribution on the Nazca-South America subduction interface using elastic modelling. Our measurements require that, at these latitudes, 10 to 12 mm yr−1 (i.e. 15 per cent of the whole convergence rate) are accommodated by the clockwise rotation of an Andean block bounded to the East by the subandean fold-and-thrust belt. This reduces the accumulation rate on the subduction interface to 56 mm yr−1 in this area. Coupling variations on the subduction interface both along-strike and along-dip are described. We find that the North Chile seismic gap is segmented in at least two highly locked segments bounded by narrow areas of weak coupling. This coupling segmentation is consistent with our knowledge of the historical ruptures and of the instrumental seismicity of the region. Intersegment zones (Iquique, Mejillones) correlate with high background seismic rate and local tectonic complexities on the upper or downgoing plates. The rupture of either the Paranal or the Loa segment alone could easily produce a Mw 8.0-8.3 rupture, and we propose that the Loa segment (from 22.5°S to 20.8°S) may be the one that ruptured in 1877.
ISSN: 0956-540X

hal-00941279
https://hal.archives-ouvertes.fr/hal-00941279
DOI : 10.1093/gji/ggt183

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : Solidus phase relations of carbon dioxide-saturated (CO2 vapor) model peridotite in the system CaO-MgO-Al2O3-SiO2-CO2 in the 1.1-2.1 GPa pressure range are reported. The solidus has a positive slope in pressure-temperature (PT) space from 1.1 to 2 GPa. Between 2 and 2.1 GPa, the melting curve changes to a negative slope. From 1.1 to 1.9 GPa, the liquid, best described as CO2-bearing silicate liquid, is in equilibrium with forsterite, orthopyroxene, clinopyroxene, spinel, and vapor. At 2 GPa, the same crystalline phase assemblage plus vapor is in equilibrium with two liquids, which are silicate and carbonatitic in composition, making the solidus at 2 GPa PT invariant. The presence of two liquids is interpreted as being due to liquid immiscibility. Melting reactions written over 1.1-1.9 GPa are peritectic, with forsterite being produced upon melting, and the liquid is silicate in composition. Upon melting at 2.1 GPa, orthopyroxene is produced, and the liquid is carbonatitic in composition. Hence, the invariance between 1.9 and 2.1 GPa is not only the reason for the dramatic change in the liquid composition over an interval of 0.2 GPa, but the carbonated peridotite solidus ledge itself most likely appears because of this PT invariance. It is suggested that because carbonatitic liquid is produced at the highest solidus temperature at 2 GPa in PT space in the system studied, such liquids, in principle, can erupt through liquid immiscibility, as near-primary magmas from depths of approximately 60 km.
ISSN: 0148-0227

hal-00939406
https://hal.archives-ouvertes.fr/hal-00939406
DOI : 10.1002/jgrb.50249

Éditeur(s) : HAL CCSD Springer Verlag
Résumé : International audience
Continuous Global Positioning System (CGPS) position time series from eastern North America constrain the pattern and magnitude of regional crustal deformation. Initial analysis delineates consistent uplift patterns, as expected from glacial isostatic adjustment (GIA) predictions, but the associated horizontal deformation is not definitive, in part due to the short time periods for a significant number of the available stations. We employ an eigenpattern decomposition in order to define a unique, finite set of deformation patterns for this continuous GPS data. Similar in nature to the empirical orthogonal functions historically employed in the analysis of atmospheric and oceanographic phenomena, the method derives the eigenvalues and eigenstates from the diagonalization of the correlation matrix using a Karhunen-Loeve expansion (KLE). The KLE technique is used to identify the important modes in both time and space for the CGPS data, modes that potentially include signals such as horizontal and vertical GIA, tectonic strain, and seasonal effects. Here we filter both the vertical and horizontal velocity patterns on different spatiotemporal scales in order to study the potential geophysical sources, after the removal of correlated and random noise. The method is successful in disaggregating the linear vertical signal from more variable and less spatially correlated signals. The vertical and horizontal results are compared to the predictions of the ICE-3G GIA loading model with a number of plausible mantle viscosity profiles. The horizontal velocity analysis allows for qualitative differentiation between several potential GIA models and suggests that, with longer time series, this technique can be employed to remove correlated noise and improve estimates of crustal strain patterns and their sources.
ISSN: 0033-4553

hal-00795454
https://hal.archives-ouvertes.fr/hal-00795454
DOI : 10.1007/s00024-011-0420-1

Éditeur(s) : HAL CCSD
Résumé : International audience
The most active deep convection area in the western Mediterranean Sea is located in the Gulf of Lions. Recent studies in this area provides some insights on the complexity of the physical dynamics of convective regions, but very little is known about their impacts on the biogeochemical properties. The CASCADE (CAscading, Surge, Convection, Advection and Downwelling Events) cruise, planed in winter 2011, give us the opportunity to compare vertical profiles of properties sampled either during stratified conditions or after/during a convection event. In the present study, we focus on the distributions of the carbonate system properties (mainly total alkalinity, AT; and total dissolved inorganic carbon, CT) because, in the context of the climate change, deep convection areas are suspected to significantly increase the sequestration of anthropogenic CO2 (CANT). Given its limited size, the impact of the Mediterranean Sea on the global carbon budget is probably minor but this marginal sea can be used as a laboratory to better understand carbon sequestration and its transfer to the basin interior by deep convection processes. Distributions of AT and CT, both measured from bottle samples, and that of CANT (estimated with the TrOCA approach) are first analyzed in the light of other key properties (salinity, temperature, and dissolved oxygen). An objective interpolation procedure is then applied to estimate CT and AT from CTD measured properties. With this procedure, the vertical resolution goes from a maximum of 32 samples per station to one property estimate every meter (more detailed distributions are obtained). Results provide arguments to conclude that CANT is rapidly transferred to the deepest layer due to deep convection events. During deep convection events, the increase of CANT in the water column is positively correlated to that of potential density and oxygen content. The challenge of quantifying the amount of sequestered carbon is however not resolved due to the complexity and the highly dynamical nature of the convective regions. Deep convection in the Gulf of Lions, in parallel with cascading along the continental slope, could thus potentially explain the very high levels of both CANT and acidification estimated in the deep layers of the western Mediterranean Sea.
Deep Sea Research Part I: Oceanographic Research Papers

hal-01336725
https://hal-univ-perp.archives-ouvertes.fr/hal-01336725
DOI : 10.1016/j.dsr.2016.04.003

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
We examine absolute gravity (AG) and vertical Global Positioning System (GPS) time series between 1995 and 2010 at eight collocated sites in mid-continent North America. The comparison of AG and GPS rates aligned to ITRF2005 yields a gravity/uplift ratio of -0.17 +/- 0.01 mu Gal mm(-1) (1 mu Gal = 10 nm s(-2)) and an intercept of -0.1 +/- 0.5 mm yr(-1). In contrast, aligning the GPS velocities to ITRF2000 results in a gravity/uplift intercept of -1.3 +/- 0.5 mm yr(-1). The near-zero gravity/uplift offset for the ITRF2005 (or ITRF2008) results shows a good alignment of the GPS vertical velocities to Earth's center of mass, and confirms that GPS velocities in this reference frame can be compared to predictions of geodynamic processes such as glacial isostatic adjustment (GIA) or sea-level rise. The observed gravity/uplift ratio is consistent with GIA model predictions. The ratio remains constant in regions of fast and slow uplift, indicating that GIA is the primary driving process and that additional processes such as local hydrology have a limited impact on a decadal time-scale. Combining AG and GPS measurements can provide significant constraints for geodetic, geodynamic, and hydrological studies. Citation: Mazzotti, S., A. Lambert, J. Henton, T. S. James, and N. Courtier (2011), Absolute gravity calibration of GPS velocities and glacial isostatic adjustment in mid-continent North America, Geophys. Res. Lett., 38, L24311, doi:10.1029/2011GL049846.
ISSN: 0094-8276

hal-00689010
https://hal.archives-ouvertes.fr/hal-00689010
DOI : 10.1029/2011GL049846

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Tectonically controlled landforms develop morphologic features that provide useful markers to investigate crustal deformation and relief growth dynamics. In this paper, we present results of morphotectonic experiments obtained with an innovative approach combining tectonic and surface processes (erosion, transport, and sedimentation), coupled with accurate model monitoring techniques. This approach allows for a qualitative and quantitative analysis of landscape evolution in response to active deformation in the three end-member geological settings: compression, extension, and strike–slip.Experimental results outline first that experimental morphologies evolve significantly at a short time scale. Numerous morphologic markers form continuously, but their lifetime is generally short because erosion and sedimentation processes tend to destroy or bury them. For the compressional setting, the formation of terraces above an active thrust appears mainly controlled by narrowing and incision of the main channel through the uplifting hanging-wall and by avulsion of deposits on fan-like bodies. Terrace formation is irregular even under steady tectonic rates and erosional conditions. Terrace deformation analysis allows retrieving the growth history of the structure and the fault slip rate evolution. For the extensional setting, the dynamics of hanging-wall sedimentary filling appears to control the position of the base level, which in turn controls footwall erosion. Two phases of relief evolution can be evidenced: the first is a phase of relief growth, and the second is a phase of upstream propagation of topographic equilibrium that is reached first in the sedimentary basin. During the phase of relief growth, the formation of triangular facets occurs by degradation of the fault scarp, and their geometry (height) becomes stationary during the phase of upstream propagation of the topographic equilibrium. For the strike–slip setting, the complex morphology of the wrench zone, composed of several interacting fault segments, enhances the interactions with the drainage network. Because of the widening of the main fault zone toward the surface, a significant amount of distributed deformation is observed along the wrench zone. Locally, where two terminations of fault segments interact, less than a quarter of the far field displacement can remain measurable using fault offsets, leading to a systematic underestimation of the real fault slip rate.These different experimental examples illustrate the great potential of the approach coupling deformation mechanisms and erosion–transport–sedimentation processes to investigate qualitatively and quantitatively the morphotectonic evolution of tectonically controlled landscapes.
ISSN: 0169-555X

hal-01243587
https://hal.archives-ouvertes.fr/hal-01243587
DOI : 10.1016/j.geomorph.2015.02.011

Éditeur(s) : HAL CCSD American Association for the Advancement of Science
Résumé : International audience
Large earthquakes produce crustal deformation that can be quantified by geodetic measurements, allowing for the determination of the slip distribution on the fault. We used data from Global Positioning System (GPS) networks in Central Chile to infer the static deformation and the kinematics of the 2010 moment magnitude (M-w) 8.8 Maule megathrust earthquake. From elastic modeling, we found a total rupture length of similar to 500 kilometers where slip (up to 15 meters) concentrated on two main asperities situated on both sides of the epicenter. We found that rupture reached shallow depths, probably extending up to the trench. Resolvable afterslip occurred in regions of low coseismic slip. The low-frequency hypocenter is relocated 40 kilometers southwest of initial estimates. Rupture propagated bilaterally at about 3.1 kilometers per second, with possible but not fully resolved velocity variations.
ISSN: 0036-8075

hal-00783213
https://hal.archives-ouvertes.fr/hal-00783213
DOI : 10.1126/science.1204132