Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Structural controls are critical during magmatic-to-hydrothermal transition in the formation of intrusion-related gold deposits. They may explain why only some parts of intrusions are mineralized and why only very few intrusions host large deposits. Moreover, most of these gold deposits postdate peak regional metamorphism and were formed in zones of relatively low strain. Indeed, the efficiency of structural gold traps is highest along favourably oriented intrusion/host-rock contacts where mechanical instability maintains high permeability in the cracked thermal aureole. This may be reinforced by melt injections from an underlying root zone. We present a structural analysis of the deformation features of a granite-pluton roof; large-scale dykes and a network of gold veins are intensively developed in this roof, recording a succession of mechanical instabilities. Our gravity survey underlines the presence of a pluton feeder zone located just beneath the mineralized network. It is argued that interferences between regional stress and melt injection in the feeder zone favoured the development of the network by strain located close to the granite roof. This stresses the role of mechanical instabilities triggered by the combined effects of regional stress and melt dynamics in determining the location and size of this type of gold deposit.
ISSN: 0191-8141

insu-00914780
https://hal-insu.archives-ouvertes.fr/insu-00914780
https://hal-insu.archives-ouvertes.fr/insu-00914780/document
https://hal-insu.archives-ouvertes.fr/insu-00914780/file/manuscript.pdf
DOI : 10.1016/j.jsg.2013.11.006

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
Fractures or discontinuities perpendicular to the least stress σ3 were generated in a synthetic rock analogue (granular, frictional, cohesive, and dilatant) material in axisymmetric extension tests. These fractures are of two types defined by the mean stress σ. When σ is very small, the fractures form through the mode I cracking at tensile σ3 equal to the material tensile strength. The fracture walls have smooth surfaces. At higher σ, these surfaces become rougher, with the topography features forming faint or delicate plumose patterns. The amplitude of the plumose topography increases with σ. The axial stress σ3 at fracturing reduces in magnitude and changes in sign with the σ increase. Thus σ3 orthogonal discontinuities can form at compressive σ3. SEM observations show that these discontinuities are deformation localization bands where the material is characterized by the heterogeneous decohesion and volume and porosity increase due to dilatancy. The band thickness is several grain sizes. At formation, the bands are not opened, so they are not mode I fractures. They become fractures with plumose fractography after the separation of the sample parts along the band. The formation mechanism of these discontinuities or fractures is not completely clear, but it is suggested that it represents a running constitutive instability in the form of dilatancy banding (with further σ increase the bands become inclined to σ1, i.e., shear). The similarity between the experimentally generated plumose surface fractures and natural joints is discussed, and it is suggested that they can be formed as propagating constitutive instabilities.
ISSN: 0148-0227

hal-00585846
https://hal.archives-ouvertes.fr/hal-00585846
DOI : 10.1029/2010JB008104

Éditeur(s) : HAL CCSD American Geophysical Union (AGU)
Résumé : Tectonics, v. 27, p. TC5011, 2008. http://dx.doi.org/10.1029/2007TC002232
International audience
The seismic activity of the Ligurian Basin, the northeastern termination of the western Mediterranean basin, is larger than in surrounding regions, even though recent geodetic studies attest that this area is subject to very low levels of deformation. This basin is an example of a type of passive margins that cannot be considered solely as inert sites of sedimentation and of progressive subsidence and that are reactivated in a compressive pattern; other examples include the Kwanza basin (Angola) and the Brazil margin. We investigated, by means of 2-D thermomechanical modeling, the structural and rheological heterogeneities that can lead to concentration of strain in this marginal basin. We deduced that the deformation of the basin is due to its particular geometric features, narrow and with a thick surrounding continental crust, related to its position at the southern termination of the Alps. This sharp transition, in terms of both geometry and rheological contrast, is a main factor in explaining the weakness of the margin. We discuss the importance of buoyancy forces versus tectonic forces, as well as thermal effects, on the observed reactivation. Influence of contrast in rheology between an oceanic-type crust and continental crust is also studied. Geodynamical implications are proposed for the region. The good agreement between the predicted localized deformation and the observed seismicity distribution should help improve seismic hazard assessment in the region.
ISSN: 0278-7407

hal-00407859
https://hal.archives-ouvertes.fr/hal-00407859
DOI : 10.1029/2007TC002232

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
In order to constrain the vertical and lateral extent of deformation and the interactions between lithosphere and asthenosphere in a context of a transpressional plate boundary, we performed teleseismic shear wave splitting measurements for 65 permanent and temporary broadband stations in central California. We present evidence for the presence of two anisotropic domains: (1) one with clear E–W trending fast directions and delay times in the range 1.5 to 2.0 s and (2) the other closely associated with the San Andreas Fault system with large azimuthal variations of the splitting parameters that can be modeled by two anisotropic layers. The upper of the two layers provides fast directions close to the strike of the main Californian faults and averaged delay times of 0.7 s; the lower layers show E–W directions and delay times in the range 1.5 to 2.5 s and thus can be compared to what is observed in stations that require a single layer. We propose the E–W trending anisotropic layer to be a 150 to 200 km thick asthenospheric layer explained by the shearing associated with the absolute plate motion of the North American lithosphere. The shallower anisotropic layer ought to be related to the dynamics of the San Andreas Fault system and thus characterized by a vertical foliation with lineation parallel to the strike of the faults localized in the lithosphere. We also propose that the anisotropic layer associated with each fault of the San Andreas Fault system is about 40 km wide at the base of the lithosphere.
ISSN: 0148-0227

hal-01236161
http://hal.univ-reunion.fr/hal-01236161
http://hal.univ-reunion.fr/hal-01236161/document
http://hal.univ-reunion.fr/hal-01236161/file/Bonnin_SKS_California_JGR2010.pdf
DOI : 10.1029/2009JB006438

Éditeur(s) : HAL CCSD Nature Publishing Group
Résumé : International audience
Reactivation of structures inherited from previous collisional or rifting events, especially lithospheric-scale faults, is a major feature of plate tectonics. Its expression ranges from continental break-up along ancient collisional belts(1,2) to linear arrays of intraplate magmatism and seismicity(3,4). Here we use multiscale numerical models to show that this reactivation can result from an anisotropic mechanical behaviour of the lithospheric mantle due to an inherited preferred orientation of olivine crystals. We explicitly consider an evolving anisotropic viscosity controlled by the orientation of olivine crystals in the mantle. We find that strain is localized in domains where shear stresses on the inherited mantle fabric are high, and that this leads to shearing parallel to the inherited fabric. During rifting, structural reactivation induced by anisotropy results in oblique extension, followed by either normal extension or failure. Our results suggest that anisotropic viscosity in the lithospheric mantle controls the location and orientation of intraplate deformation zones that may evolve into new plate boundaries, and causes long-lived lithospheric-scale wrench faults, contributing to the toroidal component of plate motions on Earth.
ISSN: 1752-0894

hal-00413033
https://hal.archives-ouvertes.fr/hal-00413033
DOI : 10.1038/ngeo528

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
The Yakutat-St. Elias collision in SE Alaska and adjacent Canada represents a prime example of present-day tectonics associated with an indentor corner. Its eastern syntaxis is marked by high exhumation, a sharp structural bend, and strain concentration at the transition from shortening to oblique transpression. Here we present GPS velocity and strain rate fields that cover the syntaxis, including 11 new stations in the core of the St. Elias Mountains. These data are corrected for transient deformation (glacial isostatic adjustment and postseismic and interseismic loading) to produce residual velocities and strain rates representative of long-term tectonics. The main features of these velocity and strain rate fields are a peak in strain rates (strain knot) in the syntaxis at the junction between the main fault systems and a rapid rotation from convergence-parallel to convergence-normal orientations of the velocities and shortening axes around the syntaxis, leading to shortening across the southern Denali Fault. These features are consistent with the strain and tectonic patterns expected near an indentor corner at the transition from shortening to transpression, with a combination of diffuse and localized deformation. The GPS velocities and strain rates show diffuse deformation around the syntaxis, from pure convergence-parallel shortening in the orogenic wedge to oblique extension that accommodates the strain rotation at the front of the syntaxis. This indentor-corner model also results in a near-zero strike-slip rate on the southern Denali Fault and shows no clear evidence for a throughgoing fault hypothesized to link the Fairweather and Totschunda Faults.
ISSN: 0148-0227

hal-01243510
https://hal.archives-ouvertes.fr/hal-01243510
DOI : 10.1002/2014JB011842

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The identification of the structures and deformation patterns in magma-poor continental rifted margins is essential to characterize the processes of continental lithosphere necking. Brittle faults, often termed mantle detachments, are believed to play an essential role in the rifting processes that lead to mantle exhumation. However, ductile shear zones in the deep crust and mantle are rarely identified and their mechanical role remains to be established. The western Betics (Southern Spain) provides an exceptional exposure of a strongly thinned continental lithosphere, formed in a supra-subduction setting during Oligocene-Lower Miocene. A full section of the entire crust and the upper part of the mantle is investigated. Variations in crustal thickness are used to quantify crustal stretching that may reach values larger than 2000% where the ductile crust almost disappear, defining a stage of hyper-stretching. Opposite senses of shear top-to-W and top-to-E are observed in two extensional shear zones located close to the crust-mantle boundary and along the brittle-ductile transition in the crust, respectively. At locations where the ductile crust almost disappears, concordant top-to-E-NE senses of shear are observed in both upper crust and serpentinized mantle. Late high-angle normal faults with ages of ca. 21 Ma or older (40Ar/39Ar on white mica) crosscut the previously hyper-stretched domain, involving both crust and mantle in tilted blocks. The western Betics exemplifies, probably better than any previous field example, the changes in deformation processes that accommodate the progressive necking of a continental lithosphere. Three successive steps can be identified: i/a mid-crustal shear zone and a crust-mantle shear zone, acting synchronously but with opposite senses of shear, accommodate ductile crust thinning and ascent of subcontinental mantle; ii/hyper-stretching localizes in the neck, leading to an almost disappearance of the ductile crust and bringing the upper crust in contact with the subcontinental mantle, each of them with their already acquired opposite senses of shear; and iii/high-angle normal faulting, cutting through the Moho, with related block tilting, ends the full exhumation of the mantle in the zone of localized stretching. The presence of a high strength sub-Moho mantle is responsible for the change in sense of shear with depth. Whereas mantle exhumation in the western Betics occurred in a backarc setting, this deformation pattern controlled by a high-strength layer at the top of the lithosphere mantle makes it directly comparable to most passive margins whose formation lead to mantle exhumation. This unique field analogue has therefore a strong potential for the seismic interpretation of the so-called “hyper-extended margins”.
ISSN: 0264-8172

insu-01310895
https://hal-insu.archives-ouvertes.fr/insu-01310895
https://hal-insu.archives-ouvertes.fr/insu-01310895/document
https://hal-insu.archives-ouvertes.fr/insu-01310895/file/Frasca-MarPetGeol-2016.pdf
DOI : 10.1016/j.marpetgeo.2016.04.020

Éditeur(s) : HAL CCSD Geological Society of America
Résumé : International audience
Porous sandstones tend to deform by the formation of low-permeability deformation bands that influence fluid flow in reservoir settings. The bands may be distributed or localized into clusters, and limited recent data suggest that tectonic regime may exert control on their distribution and clustering. In order to explore this suggestion, we performed a synthetic analysis based of 73 sets of bands, including 22 new sets measured for a reverse Andersonian regime that fill the important gap in data for this context. We find a surprisingly strong correlation between clustering and tectonic regime, where bands clearly are more distributed in the reverse regime compared to the normal regime. Together with the observed band distributions, capillary pressure data show evidence that efficient membrane seals are expected for extension, whereas pervasive permeability anisotropy is expected for contraction. Such a basic new rule concerning tectonic regime is very useful for assessment of reservoir properties where deformation bands are common but below seismic resolution.
ISSN: 0091-7613

hal-01355925
https://hal.archives-ouvertes.fr/hal-01355925
DOI : 10.1130/G37585.1

Éditeur(s) : HAL CCSD American Geophysical Union (AGU)
Résumé : International audience
The current structure of the South Armorican Domain in the French Variscan Belt, provides an excellent record of the late orogenic evolution, as documented by the complex interactions between extensional structures and partial melting. In the Golfe du Morbihan, the South Brittany Migmatite Belt (SBMB), tectonically overlain by non-melted metamorphic units, was studied by combined structural and 40Ar/39Ar methods. The recognition of successive deformation stages points to a strain continuum initiated at depth at the end of a partial melting event, and continued to near-surface brittle faulting, encompassing ductile strain localization over a major top-to-the-ESE extensional shear zone (SSZ) consistent with an overall WNW-ESE orogen-parallel stretching. This multidisciplinary study making the link between structure, texture, microchemistry and 40Ar/39Ar geochronology allow distinguishing between cooling, recrystallization and syn-tectonic crystallization ages. The first extensional insights, witnessed by dyke intrusion were dated at ~319 ± 6 Ma immediately after the SBMB partial melting. Strain localization along the SSZ, occurred until ~302-298 Ma when SBMB crossed the ductile-brittle transition. Moreover, in situ 40Ar/39Ar analysis, of syn-tectonic white micas sampled in the ductile and brittle structures yield similar ~300 Ma. Formation or reactivation of the SSZ may have occurred during the rapid cooling of the SBMB settled at ~305 Ma by conventional 40Ar/39Ar analysis. Large-scale late orogenic extensional event of the previously overthickened Variscan crust thus lasted over ~20 ± 3 Myr in the same extensional tectonic regime guided by the South Armorican Shear Zone.
ISSN: 0278-7407

insu-00628699
https://hal-insu.archives-ouvertes.fr/insu-00628699
https://hal-insu.archives-ouvertes.fr/insu-00628699/document
https://hal-insu.archives-ouvertes.fr/insu-00628699/file/2010TC002788.pdf
DOI : 10.1029/2010TC002788

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Most of the plate boundaries are activated obliquely with respect to the direction of far field stresses, as roughly only 8% of the plate boundaries total length shows a very low obliquity (ranging from 0 to 10°, sub-orthogonal to the plate displacement). The obliquity along plate boundaries is controlled by (i) lateral rheological variations within the lithosphere and (ii) consistency with the global plate circuit. Indeed, plate tectonics and magmatism drive rheological changes within the lithosphere and consequently influence strain localization. Geodynamical evolution controls large-scale mantle convection and plate formation, consumption, and re-organization, thus triggering plate kinematics variations, and the adjustment and re-orientation of far field stresses. These geological processes may thus result in plate boundaries that are not perpendicular but oblique to the direction of far field stresses. This paper reviews the global patterns of obliquity along plate boundaries. Using GPlate, we provide a statistical analysis of present-day obliquity along plate boundaries. Within this framework, by comparing natural examples and geological models, we discuss deformation patterns and kinematics recorded along oblique plate boundaries.
ISSN: 0040-1951

hal-01467188
https://hal.archives-ouvertes.fr/hal-01467188
DOI : 10.1016/j.tecto.2016.05.033

Éditeur(s) : HAL CCSD American Geophysical Union (AGU)
Résumé : International audience
We use lithospheric-scale analog models to study the reactivation of pre-existing heterogeneities under oblique shortening and its relation to the origin of arcuate orogens. Reactivation of inherited rheological heterogeneities is an important mechanism for localization of deformation in compressional settings and consequent initiation of contractional structures during orogenesis. However, the presence of an inherited heterogeneity in the lithosphere is in itself not sufficient for its reactivation once the continental lithosphere is shortened. The heterogeneity orientation is important in determining if reactivation occurs and to which extent. This study aims at giving insights on this process by means of analog experiments in which a linear lithospheric heterogeneity trends with various angles to the shortening direction. In particular, the key parameter investigated is the orientation (angle α) of a strong domain (SD) with respect to the shortening direction. Experimental results show that angles α ≥ 75° (high obliquity) allow for reactivation along the entire SD and the development of a linear orogen. For α ≤ 60° (low obliquity) the models are characterized by the development of an arcuate orogen, with the SD remaining partially non-reactivated. These results provide a new mechanism for the origin of some arcuate orogens, in which orocline formation was not driven by indentation or subduction processes, but by oblique shortening of inherited heterogeneities, as exemplified by the Ouachita orogen of the southern U.S.
ISSN: 0278-7407

insu-01498544
https://hal-insu.archives-ouvertes.fr/insu-01498544
https://hal-insu.archives-ouvertes.fr/insu-01498544/document
https://hal-insu.archives-ouvertes.fr/insu-01498544/file/Calignano_et_al-2017-Tectonics.pdf
DOI : 10.1002/2016TC004424

Éditeur(s) : HAL CCSD Springer Verlag
Résumé : International audience
Our ability to decipher the mechanisms behind metamorphic transformation processes depends in a major way on the extent to which crystallographic and microstructural information is transferred from one stage to another. Within the Leka Ophiolite Complex in the Central Norwegian Caledonides, prograde olivine veins that formed by dehydration of serpentinite veins in dunites exhibit a characteristic distribution of microstructures: The outer part of the veins comprises coarse-grained olivine that forms an unusual, brick-like microstructure. The inner part of the veins, surrounding a central fault, is composed of fine-grained olivine. Where the fault movement included a dilational component, optically clear, equant olivine occurs in the centre. Electron backscatter diffraction mapping reveals that the vein olivine has inherited its crystallographic preferred orientation (CPO) from the olivine in the porphyroclastic host rock; however, misorientation is weaker and associated to different rotation axes. We propose that prograde olivine grew epitaxially on relics of mantle olivine and thereby acquired its CPO. Growth towards pre-existing microfractures along which serpentinisation had occurred led to straight grain boundaries and a brick-like microstructure in the veins. When dehydration embrittlement induced slip, a strong strain localisation on discrete fault planes prevented distortion of the CPO due to cataclastic deformation; grain size reduction did not significantly modify the olivine CPO. This illustrates how a CPO can be preserved though an entire metamorphic cycle, including hydration, dehydration, and deformation processes, and that the CPO and the microstructures (e.g. grain shape) of one phase do not necessarily record the same event.
ISSN: 0010-7999

hal-01622643
https://hal.archives-ouvertes.fr/hal-01622643
DOI : 10.1007/s00410-017-1378-5

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
Phyllosilicate content and related permeability of fault zones form primary controls on hydraulic and mechanical behavior of the brittle crust. Hence, understanding and predicting the localization of these ubiquitous minerals is a major issue for fundamental and applied geosciences. We describe normal fault zones cutting a foreland arkosic turbiditic formation suffering high-T diagenesis and formed under conditions (~200°C) typical of deeply buried reservoirs and common within the seismogenic interval. Microstructural analyses show a large proportion of phyllosilicates (up to 34%) in the fault rock, derived from near-complete feldspar alteration and disaggregation during deformation. This study shows that even faults with offsets (~20 cm) much lower than bed thickness can have such large feldspar-to-phyllosilicate transformation ratios, implying that the origin of the phyllosilicates is purely transformation related. These results imply that the potential sealing capacity and strength of faults could be predicted from the host rock feldspar content. Where sealing capacity and fault strength can be related to phyllosilicate content, these properties can then also be inferred from the predicted phyllosilicate content: this opens up new horizons concerning the hydraulic and the mechanical behavior of the upper crust.
ISSN: 0094-8276

hal-00903574
https://hal.archives-ouvertes.fr/hal-00903574
DOI : 10.1002/grl.50829

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
We present results of a geomorphological and morphotectonic analysis of the northeastern part of the Rif. We show that the present day kinematics of the Rif is characterized by active deformation along the Trougout and Nekor faults in the North-East. Digital Elevation Models of offset drainage features (streams, fluvial terraces) allow determining a normal-left-lateral motion along the Trougout fault and a left-lateral strike-slip motion along the Nekor fault. Preliminary 3He cosmogenic dates of tectonic markers yield vertical and horizontal slip rates of ∼0.9 mm/yr and ∼0.5 mm/yr, respectively along the Trougout fault. The present-day localized transtension seen in the north-eastern Rif morphology (Ras Tarf) is coeval with uplifted marine terraces near the Al Hoceima Bay. U/Th dating of shells yield an average uplift rate of ∼0.2 mm/yr during the past 500 ka. These data show that active transtension in the northeastern Rif is also associated with uplift. These new morphotectonic constraints are consistent with the GPS measurements showing southwestward overall motion of most of the Rif belt with respect to stable Africa.
ISSN: 0264-3707

hal-01053492
https://hal.archives-ouvertes.fr/hal-01053492
DOI : 10.1016/j.jog.2014.01.004

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Microstructures, U-Pb SHRIMP zircon ages and temperature estimates were used to constrain the fabric evolution and timing of mylonitisation in the Patos shear zone (NE Brazil). Melt-bearing HT-mylonitic orthogneiss displays solid-state fabrics with coarse quartz ribbons and sutured grain boundaries. K-feldspar is often fractured and shows peripheral myrmekite. The textures typically become magmatic at the contacts with the Espinho Branco anatexite. Zircon crystals from two samples of the leucosome show Paleoproterozoic (ca. 2.2 Ga) inherited cores that are enveloped by recrystallised Neoproterozoic rims. These zircon grains define a discordia with lower intercept ages of 558 and 562 Ma but with large analytical errors. A leucogranite with transitional contacts with host diatexites provides a well-constrained zircon mean age of 566 ± 6 Ma (n = 15, 95% conf.), which is considered the best estimate for the peak metamorphic conditions. The transition from HT-mylonites to fine-grained mylonites and ultramylonites is marked by a progressive grain size reduction assisted by recrystallisation. Quartz crystallographic fabrics display [0 0 0 1] concentrations between Z and Y. K-feldspar and plagioclase fabrics record the activity of the (0 1 0)[0 0 1] and (0 1 0)[1 0 0] slip systems and, in the lower-temperature tectonites, the (1 0 0)[0 1 0] slip system. These results suggest a diachronic evolution in which an initial HT northern domain was deformed by intracrystalline slip and melt-assisted granular flow, followed by medium- to low-temperature solid-state creep in the southern shear zone domain. The mylonites therefore record the rheological heterogeneities responsible for the formation of a late continental shear zone that nucleated under partially molten conditions and was later reactivated through melt-absent strain localization following exhumation.
ISSN: 0301-9268

hal-01053497
https://hal.archives-ouvertes.fr/hal-01053497
DOI : 10.1016/j.precamres.2013.12.020

Éditeur(s) : HAL CCSD American Geophysical Union (AGU)
Résumé : Zircon and apatite fission track (ZFT and AFT) and (U-Th)/He, ;40;Ar/;39;Ar hornblende, and U-Pb zircon ages from the granites of Tinos Island in the Aegean Sea, Greece, suggest, together with published ZFT data, that there are three extensional detachments on Tinos. The Tinos granites crosscut the Tinos detachment. Cooling of the granites was controlled by the Livadi detachment, which occurs structurally above the Tinos detachment. Our U-Pb zircon age is 14.6 ± 0.2 Ma and two ;40;Ar/;39;Ar hornblende ages are 14.4 ± 0.4 and 13.7 ± 0.4 Ma. ZFT and AFT ages go from 14.4 ± 1.2 to 12.2 ± 1.0 Ma and 12.8 ± 2.4 to 11.9 ± 2.0 Ma. (U-Th)/He ages are from 10.4 ± 0.2 to 9.9 ± 0.2 Ma (zircon) and 11.9 ± 0.5 to 10.0 ± 0.3 Ma (apatite). All ages decrease northeastward in the direction of hanging wall transport on the Livadi detachment and age-distance relationships yield a slip rate of 2.6 (+3.3 / −1.0) km Ma;−1;. This rate is smaller than a published slip rate of 6.5 km Ma;−1; for the Vari detachment, which is another detachment structurally above the Tinos detachment. Because of the different rates and because published ZFT ages from the footwall of the Vari detachment are ∼10 Ma, we propose that the Vari detachment has to be distinguished from the older Livadi detachment. We discuss various models of how the extensional detachments may have evolved and prefer a scenario in which the Vari detachment cut down into the footwall of the Livadi detachment successively exhuming deeper structural units. The thermochronologic ages demonstrate the importance of quantitative data for constraining localization processes during extensional deformation.
ISSN: 0278-7407

hal-00407638
https://hal.archives-ouvertes.fr/hal-00407638
DOI : 10.1029/2006TC001969

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Deep crustal and mantle rocks are exhumed in core complex mode of extension in three types of structures: metamorphic core complexes, oceanic core complexes and magma poor passive margins. Using available analogue and numerical models and their comparison with natural examples, the present paper reviews the mechanical processes involved in these different types of extensional setting. Three main aspects are considered: i) the primary role of lithosphere rheology, ii) the lithosphere-scale patterns of progressive deformation that lead to the exhumation of deep metamorphic or mantle rocks and iii) the initiation and development of detachment zones. Crustal core complexes develop in continental lithospheres whose Moho temperature is higher than 750 °C with “upper crust-dominated” strength profiles. Contrary to what is commonly believed, it is argued from analogue and numerical models that detachments that accommodate exhumation of core complexes do not initiate at the onset of extension but in the course of progressive extension when the exhuming ductile crust reaches the surface. In models, convex upward detachments result from a rolling hinge process. Mantle core complexes develop in either the oceanic lithosphere, at slow and ultra-slow spreading ridges, or in continental lithospheres, whose initial Moho temperature is lower than 750 °C, with “sub-Moho mantle-dominated” strength profiles. It is argued that the mechanism of mantle exhumation at passive margins is a nearly symmetrical necking process at lithosphere scale without major and permanent detachment, except if strong strain localization could occur in the lithosphere mantle. Distributed crustal extension, by upper crust faulting above a décollement along the ductile crust increases toward the rift axis up to crustal breakup. Mantle rocks exhume in the zone of crustal breakup accommodated by conjugate mantle shear zones that migrate with the rift axis, during increasing extension.
ISSN: 0040-1951

insu-01610186
https://hal-insu.archives-ouvertes.fr/insu-01610186
https://hal-insu.archives-ouvertes.fr/insu-01610186/document
https://hal-insu.archives-ouvertes.fr/insu-01610186/file/brun-tect-2017.pdf
DOI : 10.1016/j.tecto.2017.09.017