Résumé : The war in Cuba helped to maintain a precarious unity within the Centro Español, but once the war ended in 1898, calls for the transformation of the Centro into a mutual aid society gained strength again. The leadership failed to respond, and in 1902 a number of the members decided to ask the Centro Asturiano in Havana for permission to establish an affiliate in Tampa, which would offer medical assistance to its members. The success of the Centro Asturiano forced the officers of the Centro Español to reconsider their position and agree to transform their organization into a mutual aid society. Once this was done, they attempted to obtain the dissolution of the Tampa affiliate of the Centro Asturiano, but they were unsuccessful. By failing to recognize the strength of the idea of mutualism, the officers of the Centro Español undermined the patriotic unity they had championed, for the Centro lost its claim to be the sole representative of the Spanish community in Tampa.
(Funding) Funded in part by the Institute for Museum and Library Services (IMLS), Ephemeral Cities Project.
Tampa |z 1271000 |2 ceeus
Hillsborough County |z 12057 |2 ceeus
United States of America -- Florida -- Hillsborough County -- Tampa

Droits : All rights reserved. 2005.
P21-0260

Éditeur(s) : HAL CCSD
Résumé : The present PhD thesis is devoted to the numerical simulation and analysis of shear on cohesive granular materials. In the framework of the Contact Dynamics method, we developed a model of cohesive bonding, which mimics cohesion by cementation. This model involves three contact strength parameters (a tensile strength, a coefficient of sliding friction, and a coefficient of rolling friction) as well as a local criterion, which controls the creation and the breaking of cohesive bonds. All contacts are cohesive at the beginning of the numerical simulations, and contact rupture leads to an irreversible loss of tensile strength (debonding). We varied systematically the three contact strength parameters and studied their influence on the shear strength, the dilatancy, and the microstructure of the granular media. Our results show that internal friction and macroscopic tensile strength have different origins at the contact scale. We also find that the microstructure of the granular media, when sheared at the steady state (also known as the `critical state"), is strongly affected by the local coefficients of sliding and rolling friction. In particular, the mechanical role of the weak network changes with these two contact parameters, which results from the formation of a new structure of force transmission. On the other hand, we also applied the same numerical simulation method to the simulation of landslides. We developed a methodology, which takes into account the initial morphology of the hillslope, the strength of geomaterials, and a triggering factor, integrating in the same model the initiation and propagation phases of the landslide. To illustrate this methodology, we applied it to the simulation of a hypothetical example of avalanche triggered by the progressive rise of a water table.
Ce travail de thèse porte sur la modélisation numérique et l'analyse du cisaillement dans les milieux granulaires cohésifs. Dans le cadre de la méthode de la Dynamique des Contacts, nous avons développé un modèle de cohésion qui cherche à imiter la cohésion par cimentation. Ce modèle fait intervenir trois paramètres de résistance au niveau des contacts (une résistance à la traction, un coefficient de frottement de glissement, et un coefficient de frottement de roulement) ainsi qu'un critère de création et de rupture des liens cohésifs. Les contacts sont cohésifs au début des simulations et leur rupture entraîne la perte irréversible de la résistance à la traction. Nous avons fait varier les trois paramètres microscopiques et nous avons étudié leur influence dans la résistance au cisaillement, la dilatance, et la microstructure du milieu. Nos résultats montrent que le frottement interne et l'adhésion macroscopiques ont des origines microscopiques différentes. Nous observons aussi que la microstructure du milieu cisaillé à l'état stationnaire (aussi connu comme ``l'état critique") est fortement affectée par l'angle de frottement et la résistance au roulement au niveau des contacts. En particulier, le rôle mécanique du réseau faible change avec ces deux paramètres microscopiques, ce qui résulte de la formation d'une nouvelle structure de transmission de forces. D'autre part, nous avons appliqué cette méthode de simulation numérique à l'étude d'un processus naturel : les glissements de terrain. Nous avons développé une méthodologie qui tient compte de la morphologie initiale du système, de la résistance des géomatériaux, et d'un mécanisme de déclanchement, ce qui permet d'intégrer dans le même modèle les phases d'initiation et de propagation du glissement. Pour illustrer cette méthodologie, nous l'avons appliquée à la modélisation d'un exemple hypothétique d'avalanche déclenchée par la montée progressive du niveau d'une nappe d'eau.
https://tel.archives-ouvertes.fr/tel-00311303

tel-00311303
https://tel.archives-ouvertes.fr/tel-00311303
https://tel.archives-ouvertes.fr/tel-00311303/document
https://tel.archives-ouvertes.fr/tel-00311303/file/these_estrada.pdf

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Diffusion parameters for HTO, 36Cl−, and 125I− were determined on Upper Toarcian argillite samples from the Tournemire Underground Research Laboratory (Aveyron, France) using the through diffusion technique. The direction of diffusion was parallel to the bedding plane. The purpose of the present study was 3-fold; it was intended (i) to confirm the I− interaction with Upper Toarcian argillite and to verify the effects of initial I− concentration on this affinity, as previously observed by means of radial diffusion experiments, (ii) to highlight any discrepancy between Cl− and I− diffusivity, and (iii) to investigate the effect of an increase of the ionic strength of the solution on the anionic tracers' diffusive behaviour. The results show that the effective diffusion coefficient (De) and diffusion accessible porosity (εa) values obtained with an ionic strength (I.S.) synthetic pore water of 0.01 eq L−1 are: De = 2.35-2.50 × 10−11 m2 s−1 and εa = 12.0-15.0% for HTO, and De = 14.5-15.5 × 10−13 m2 s−1 and εa = 2.5-2.9% for 36Cl−. Because of anionic exclusion effects, anions diffuse slower and exhibit smaller diffusion accessible porosities than HTO, taken as a water tracer. The associated effective diffusion coefficient (De) and rock capacity factor (α) obtained for 125I are: De = 7.00-8.60 × 10−13 m2 s−1 and α = 4.3-7.2%. Such values make it possible to calculate low 125I distribution ratios (0.0057 < RD < 0.0192 mL g−1) which confirm the trend indicating that the 125I rock capacity factor increases with the decrease of the initial I− concentration. Additional through-diffusion experiments were carried out with a higher ionic strength synthetic pore water (I.S. = 0.11 eq L−1). No evolution of HTO diffusion parameters was observed. The anionic tracers' effective diffusion coefficient increased by a factor of two but no clear evolution of their accessible porosity was observed. Such a paradox could be related to the particularly small mean pore size of the Upper Toarcian argillite of Tournemire. The most significant finding of this study is the large discrepancy (factor of two) between the values of the effective diffusion coefficient for 125I and 36Cl. Whatever the ionic strength of the synthetic solution used, 125I exhibited De values two times lower than those of 36Cl. A detailed explanation for this difference cannot be given at present even if a hypothesis based on ion-pairing or on steric-exclusion cannot be excluded. This makes questionable the assumption usually made for quantifying 125I sorption and postulating that 36Cl and 125I would diffuse in the same porosity. In other terms, at Tournemire, 125I sorption could be more pronounced than previously indicated.
ISSN: 0883-2927

hal-00757749
https://hal.archives-ouvertes.fr/hal-00757749
DOI : 10.1016/j.apgeochem.2011.12.017

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
The brittle to ductile transition (BDT) in rocks may strongly influence their transport properties (i.e., permeability, porosity topology ...) and the maximum depth and temperature where hydrothermal fluids may circulate. To examine this transition in the context of Icelandic crust, we conducted deformation experiments on a glassy basalt (GB) and a glass-free basalt (GFB) under oceanic crust conditions. Mechanical and micro-structural observations at a constant strain rate of 10(-5) s(-1) and at confining pressure of 100-300 MPa indicate that the rocks are brittle and dilatant up to 700-800 degrees C. At higher temperatures and effective pressures the deformation mode becomes macroscopically ductile, i.e., deformation is distributed throughout the sample and no localized shear rupture plane develops. The presence of glass is a key component reducing the sample strength and lowering the pressure of the BDT. In the brittle field, strength is consistent with a Mohr-Coulomb failure criterion with an internal coefficient of friction of 0.42 for both samples. In the ductile field, strength is strain rate-and temperature-dependent and both samples were characterized by the same stress exponent in the range 3 < n < 4.2 but by very different activation energy Q(GB) = 59 +/- 15 KJ/mol and Q(GFB) = 456 +/- 4 KJ/mol. Extrapolation of these results to the Iceland oceanic crust conditions predicts a BDT at similar to 100 degrees C for a glassy basalt, whereas the BDT might occur in non-glassy basalts at deeper conditions, i.e., temperatures higher than 550 +/- 100 degrees C, in agreement with the Icelandic seismogenic zone.
ISSN: 0148-0227

hal-00760905
https://hal.archives-ouvertes.fr/hal-00760905
DOI : 10.1029/2011JB008884

Éditeur(s) : HAL CCSD ACSM
Résumé : International audience
The aim of this study was to examine the effects of the cycle-run and run-cycle successions of the triathlon and duathlon, respectively, on respiratory muscle strength and endurance. Methods: Respiratory muscle strength was assessed by measuring maximal inspiratory (P1max) and expiratory {PEmax) pressures. Respiratory muscle endurance was assessed by measuring the time limit (Tlim). Twelve triathleles participated in a three-trial protocol. The first trial consisted of an incremental cycle test to assess the maximal oxygen uptake (VO2max) of triathletes. Trial 2 consisted of 20 min of cycling followed by 20 min of running (C-R), and trial 3 consisted of 20 min of running followed by 20 min of cycling (R-C). Trials 2 and 3 were performed at the same metabolic intensity (% VO2max). P1max and P1max were measured before and 10 min after C-R and R-C, and I min after the post-C-R and post-R-C Tlim measurements (P1max l'). Tlim was measured I d before and 30 min after C-R and R-C. Results: The results showed a significant decrease in P1max after C-R (126.7 ± 4.3 cmH2O, P < 0.05) and R-C (123.7 ± 4.9 cmH2O, P < 0.05) compared with the baseline values (130 ± 3.8 and 129.6 ± 4.3 cmH2O, respectively). P1max 1' showed a significantly greater decrease after R-C versus C-R(111.2 ± 5.5 cmH2O vs 121.2 ± 3.9 cmH2O,respectively, P < 0.001). Tlim after C-R (3.3 ± 0.3 min) decreased significantly compared with baseline values (4.19 ± 0.3min and 4.02 ± 0.3 min, respectively). However, the Tlim decrease after R-C was significantly greater than after C-R (P < 0.001). Conclusion: We concluded that respiratory muscle strength and endurance were less decreased after the cycle-run succession and that cycling induced a greater decrease in respiratory muscle endurance than running.
Medicine & Science in Sports & exercise

hal-00720796
https://hal.univ-antilles.fr/hal-00720796

Éditeur(s) : HAL CCSD
Résumé : International audience
The strength of the lithospheric mantle controls the mode of lithosphere deformation: the presence or absence ofa high strength brittle mantle respectively leads to localized or distributed rifting. However, first order geophysicaldata question the existence of such a brittle mantle. Here we use 2-D finite-element large strain modelling toquantify the impact of a ductile localizing mantle – instead of brittle – in triggering continental rifting. As a novelty,the mantle rheology considers the effect of grain boundary sliding during strain-induced grain size reduction,which may promote a significant strength drop and subsequent strain localization at low mantle temperature (<700-800°C). Our results reveal that such ductile localizing mantle implies varying modes of continental rifting thatmainly depend on both the amount of weakening in the ductile mantle and the strength of the lower ductile crust. Amedium to strong lower crust implies coupling between the upper crust and ductile localizing mantle, yielding tonarrow continental rifting. In contrast, a weak lower crust implies decoupling between the upper crust and ductilelocalizing mantle, giving rise to a switch from distributed faulting at incipient strain to localized faulting at largestrain. Ductile strain localization in the lithospheric mantle is therefore sufficient to trigger continental rifting,although a critical amount of weakening is required. Such ductile localizing mantle provides a relevant geologicaland mechanical alternative to the brittle mantle. It moreover provides a wider variety of modes of upper crustalfaulting that are commonly observed in nature.
EGU General Assembly 2014
Vienne, Austria

insu-01565161
https://hal-insu.archives-ouvertes.fr/insu-01565161

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
We present a 2-D Contact Dynamics discrete element model for simulating initiation and motion of rock avalanches, integrating hillslope geometry, Mohr-Coulomb rock behavior, pore pressure before avalanche triggering, and avalanche trigger. Avalanche motion is modeled as a dense granular flow of dry frictional and cohesive particles. On the basis of granular physics and shear experiments, we review some of the theories for the unexpectedly long runout of rock avalanches. Different causes are evoked, according to the strength (strong or weak) of the slip surface relative to the bulk. "Mechanical fluidization'' and "acoustic fluidization'' theories state that agitation of rock particles reduces frictional strength, increasing runout. Conversely, granular mechanics suggests that, as "shear-strain'' rate increases, granular material becomes more agitated, more dissipative, and more resistant. Another theory states that dynamic fragmentation of clasts creates an isotropic pressure that drives longer runout. In contrast, granular mechanics suggests that fragmentation may induce fluidization and strengthening of the granular material, while particle size reduction (among others) induces weakening of the granular flow and enhances long runout. Runout is also enhanced for column-like rock masses collapsing from steep hillslopes. Long runout may also be linked to thermal weakening mechanisms at the slip surface (e.g., thermal pressurization, and shear melting), which may lower drastically the shear strength. The model is illustrated with a hypothetical example of a rain-triggered avalanche, mobilizing shallowly dipping layers. Several phases are identified, including slope failure, avalanche triggering resulting from slip weakening, and avalanche motion in which rocks are folded and sheared.
ISSN: 0148-0227

hal-00420883
https://hal.archives-ouvertes.fr/hal-00420883
DOI : 10.1029/2008JF001072

Éditeur(s) : HAL CCSD American Geophysical Union (AGU)
Résumé : International audience
Observations from deep boreholes at several locations worldwide, laboratory measurements of frictional strength on quartzo-feldspathic materials, and earthquake focal mechanisms indicate that crustal faults are strong (apparent friction μ ≥ 0.6). However, friction experiments on phyllosilicate-rich rocks and some geophysical data have demonstrated that some major faults are considerably weaker. This weakness is commonly considered to be characteristic of mature faults in which rocks are altered by prolonged deformation and fluid-rock interaction (i.e., San Andreas, Zuccale, and Nankai Faults). In contrast, in this study we document fault weakening occurring along a marly shear zone in its infancy (<30 m displacement). Geochemical mass balance calculation and microstructural data show that a massive calcite departure (up to 50 vol %) from the fault rocks facilitated the concentration and reorganization of weak phyllosilicate minerals along the shear surfaces. Friction experiments carried out on intact foliated samples of host marls and fault rocks demonstrated that this structural reorganization lead to a significant fault weakening and that the incipient structure has strength and slip behavior comparable to that of the major weak faults previously documented. These results indicate that some faults, especially those nucleating in lithologies rich of both clays and high-solubility minerals (such as calcite), might experience rapid mineralogical and structural alteration and become weak even in the early stages of their activity.
ISSN: 0278-7407

hal-01211481
https://hal.archives-ouvertes.fr/hal-01211481
DOI : 10.1002/2014TC003716

Résumé : It is about an article presenting the institute, its history, its presence and the projects it leads in New Caledonia. After a first part of general presentation of Ifremer a focus is placed on the strengthening of the presence of the institute in New Caledonia. 3 points are developed by L. Loubersac on the in-house organization, the strategy and examples of works realized within the framework of the buildind up of the lagoons integrated project. Then a spotlight is offered toward 3 projects: DEDUCTION 2 which aims at optimizing the performances of the shrimp aquaculture sector (T. Laugier), AMICAL which focuses on micro-algae aquaculture (L. Chim) and AMBIO centred on the monitoring and the definition of performance indicators for management of Marine Protected Areas and zones Registered on the World heritage (D. Pelletier). The synthesis of this article is realized by S. Chopot of the New Caledonia environment magazine.
Il s’agit d’un article présentant l’institut, son historique, sa présence et les projets qu’il mène en Nouvelle-Calédonie. Après une première partie de présentation générale de l’organisme un focus est placé sur le renforcement de la présence de l’Ifremer en Nouvelle-Calédonie. 3 questions sont posées à L. Loubersac sur l’organisation en interne, la stratégie et des exemples de travaux réalisés dans le cadre du chantier lagons. Puis un coup de projecteur est porté sur 3 projets : Déduction 2 qui vise à optimiser les performances de la filière crevetticole (T. Laugier), AMICAL qui se focalise sur la culture de micro-algues (L. Chim) et AMBIO axé sur le suivi et la définition d’indicateurs de performance des modes de gestion des Aires Marines protégées et des zones Inscrites au Patrimoine Mondial (D. Pelletier). La synthèse de cet article est réalisée par S. Chopot de la revue Environnement Nouvelle-Calédonie.
Environnement Nouvelle-Calédonie, 2013-05 , N. 20 , P. 60-89

Droits : info:eu-repo/semantics/openAccess
http://archimer.ifremer.fr/doc/00200/31093/29501.pdf
http://archimer.ifremer.fr/doc/00200/31093/

Résumé : The boundaries of territorial waters are not as stable as boundaries on land. Nowadays, indeed they are characterised by their very mobility. No doubt the reason for this is political. A state which sought to further her own interests by enlarging her domain within her own waters would encounter no sovereign opposition. Additonally, with the collapse of the traditional "understanding" regarding the conception of -and the criteria governing -maritime boundaries. nations chose the most effective methods of appeasing their own needs and appetites. This was achieved with the maximum ingenuity. The natural boundary myth was shaken sometimes before and sometimes simultaneously with, the cultivation of negotiating skills or, from a position of strength. the imposition of "political limits". Fruitful sources of approximation were provided by phenomena such as low-water mark, the continental shelf. the Humboldt current and so on. As for accuracy. however. this was obtained by the application of geometrical methods such as calculation on a straight line basis or by equidistance or. again. by numeric evaluation : expression of distance in nautical miles. The general effect of this medley of arguments - or pretexts - has been to add to the fluctuating nature of sea boundaries rather than contribute to their stability. In fact. the only way stabilisation of these boundaries is usually achieved is by confrontation between two or more adjacent and competing sovereign states once the question of demarcation has been hammered out. The ocean, "man's common heritage", seems to have entered a phase of parcelling out, of sharing. [NOT CONTROLLED OCR]
Les frontières maritimes n'ont pas la stabilité des frontières terrestres. Dans la présente époque, au contraire, elles se caractérisent essentiellement par leur mobilité. La principale raison de ce phénomène est sans doute d'ordre politique : au large de sa mer territoriale, l'État ne rencontre pas d'autre souveraineté lorsque ses intérêts le portent à étendre son emprise. Aussi, lorsque le « consensus » international traditionnel sur la conception et le critère de la frontière maritime fut ruiné. les États laissèrent libre cours à leur ingéniosité pour choisir les techniques les plus adéquates à la pleine satisfaction de leurs besoins et de leurs appétits. Tour à tour, et, parfois. simultanément. fut agité le mythe de la « frontière naturelle » et cultivé l'art de négocier ou d'imposer, selon les rapports de force. des "limites politiques". La "laisse de basse mer", la "marge continentale ", le courant de Humboldt. etc. fournirent des approximations fécondes. Mais la certitude est venue des techniques géométriques (lignes de base droites, équidistance) ou des évaluations chiffrées (distance exprimée en milles marins). De façon générale. ces divers arguments, ou prétextes. ont puissamment alimenté le dynamisme des frontières maritimes et fort peu contribué à leur stabilisation. Celle-ci ne procède finalement que de la rencontre de deux ou plusieurs souverainetés voisines et concurrentes. une fois tranchées les querelles de "bornage". L'océan, "héritage commun de l'humanité", est entré, semble-t-il, dans une phase de liquidation et de partage... [OCR NON CONTRÔLE]

Droits : 1979 CNEXO
http://archimer.ifremer.fr/doc/1979/rapport-4798.PDF
http://archimer.ifremer.fr/doc/00000/4798/

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Analogue and numerical models have shown that the strength of the lithospheric mantle controls the mode of lithosphere deformation. In extension, the presence or absence of a high strength brittle mantle respectively leads to localized or distributed rifting. However, first order geophysical data question the existence of such a brittle mantle. Here we use 2-D finite-element large strain modelling to quantify the impact of a ductile localizing mantle - instead of brittle - in triggering continental rifting. As a novelty, the mantle rheology considers the effect of grain boundary sliding during strain-induced grain size reduction, which may promote a significant strength drop and subsequent strain localization at low mantle temperature (< 700-800 °C). Our results reveal that such ductile localizing mantle implies varying modes of continental rifting that mainly depend on both the amount of weakening in the ductile mantle and the strength of the lower ductile crust. A medium to strong lower crust implies coupling between the upper crust and ductile localizing mantle, yielding to narrow continental rifting. In contrast, a weak lower crust implies decoupling between the upper crust and ductile localizing mantle, giving rise to a switch from distributed faulting at incipient strain to localized faulting at large strain. Ductile strain localization in the lithospheric mantle is therefore sufficient to trigger continental rifting, although a critical amount of weakening is required. Such ductile localizing mantle provides a relevant geological and mechanical alternative to the brittle mantle. It moreover provides a wider variety of modes of upper crustal faulting that are commonly observed in nature.
ISSN: 0040-1951

Droits : info:eu-repo/semantics/OpenAccess
insu-00924254
https://hal-insu.archives-ouvertes.fr/insu-00924254
https://hal-insu.archives-ouvertes.fr/insu-00924254/document
https://hal-insu.archives-ouvertes.fr/insu-00924254/file/Gueydan_precigout_2014_Tectonophysics.pdf
DOI : 10.1016/j.tecto.2013.11.029

Éditeur(s) : HAL CCSD AGU and the Geochemical Society
Résumé : International audience
The association of experimental data showing that the plastic deformation of olivine, the main constituent of the upper mantle, is highly anisotropic and the ubiquitous seismic anisotropy in the upper mantle, which indicates that olivine crystals show coherent orientations over scales of tens to hundreds of kilometers, implies that the long-term deformation in the upper mantle is anisotropic. We propose a multiscale approach, based on a combination of finite element and homogenization techniques, to model the deformation of a lithospheric plate while fully considering the mechanical anisotropy stemming from a strain-induced orientation of olivine crystals in the mantle. This multiscale model explicitly takes into account the evolution of crystal preferred orientations (CPO) of olivine and of the mechanical anisotropy during the deformation. We performed a series of numerical experiments simulating the uniaxial extension of a homogeneous (100% olivine) but anisotropic plate to test the role of the olivine CPO on the plate mechanical behavior and the link between CPO and mechanical anisotropy evolution. Even for this simple solicitation, different orientations and intensity of the initial olivine CPO result in variable plate strengths and deformation regimes. A plate with an initial CPO where the olivine [100] and [010] axes are concentrated at 45 degrees to the extension direction has high resolved shear stresses on the easy (010)[100] and (001)[100] slip systems of olivine. This results in low strength and in deformation by transtension. Plates with an initial CPO where the maximum of [100] axes is parallel or normal to the extension direction show a high initial strength. Isotropic plates have an intermediate behavior. The progressive rotation of olivine [100] axes toward the imposed stretching direction results in hardening in all models, except in those characterized by an initial concentration of olivine [100] axes normal to the imposed extension, in which softening is followed by hardening.
ISSN: 1525-2027

hal-00420063
https://hal.archives-ouvertes.fr/hal-00420063
DOI : 10.1029/2009GC002423

Éditeur(s) : Elsevier
Résumé : The Okinawa Trough is a natural laboratory for the study of later Quaternary land-ocean interaction and paleoenvironmental changes. In this study we reconstruct the evolution of clay mineral assemblages in Core DGKS9604 retrieved from the central Okinawa Trough. Illite dominates the clay mineral compositions, with average contents above 60%. Clay mineral evolution since 28 ka is closely related to changes in sediment provenance and paleoenvironment. Sea level rise and the strength of the Kuroshio Current control the dispersal and deposition of clays on the East China Sea shelf and in the Okinawa Trough, and thus, determine the clay mineral compositions in the core sediments. During the late last glacial period (28.0-14.0 ka), the paleo-Changjiang River mouth was situated at the shelf edge close to the central Okinawa Trough and thus, together with the outer shelf, supplied large volumes of terrigenous sediments directly into the trough. From 14.0 to 8.4 ka influence from the Changjiang decreased while the mid-outer shelf of the East China Sea became the dominant sediment source to the central Okinawa Trough as sea level rose and the Changjiang river mouth migrated west. Strong sediment reworking and erosion at the shelf edge at 15-13 ka significantly increased the lateral transport of fine-grained shelf sediments to the central Okinawa Trough. Since ca. 8.4 ka clays from Taiwan have dominated the sediment flux to the site, coinciding with the re-entry of the Kuroshio Current into the trough. The increasing influence of the Changjiang-sourced sediments since 1.5 ka was probably related to the weakening of the Kuroshio Current and/or a higher river flux. (C) 2010 Elsevier B.V. All rights reserved.
Palaeogeography, Palaeoclimatology, Palaeoecology (0031-0182) (Elsevier), 2010-03 , Vol. 288 , N. 1-4 , P. 108-117

Droits : 2010 Elsevier B.V. All rights reserved.
http://archimer.ifremer.fr/doc/00002/11367/7977.pdf
DOI:10.1016/j.palaeo.2010.01.040
http://archimer.ifremer.fr/doc/00002/11367/

Éditeur(s) : HAL CCSD IOS Press
Résumé : International audience
The hematocrit-to-viscosity ratio (HVR) has been widely used has an estimate of red blood cell (RBC) oxygen transport effectiveness into the microvasculature or as an oxygen delivery index. However, no study investigated the possibility of HVR to truly reflect RBC oxygen transport effectiveness or to be an oxygen delivery index. We measured blood viscosity at high shear rate (225 s-1), hematocrit, HVR, as well as the microvascular oxyhemoglobin saturation (TOI; tissue oxygen index) by spatial resolved near-infrared spectroscopy (NIRS) at cerebral and muscle levels in three population known to have various degrees of hemorheological abnormalities: healthy subjects (AA), patients with sickle cell SC disease (SC) characterized by moderate anemia and patients with sickle cell anemia (SS) marked by severe anemia. At both the cerebral and muscle level, HVR was positively correlated with TOI (r = 0.28; p = 0.03 and r = 0.38; p = 0.003, at the cerebral and muscle level, respectively). These findings suggest that HVR probably play a key role in blood flow and hemodynamic regulation in the microvasculature, hence modulating the amount of oxygen available for tissues. Nevertheless, the strengths of the associations are weak (R2 < 0.50), suggesting that other determinants modulate microvascular blood flow and oxygenation, such as vascular geometry and vasomotor reserve.
ISSN: 1386-0291

inserm-01081701
http://www.hal.inserm.fr/inserm-01081701
http://www.hal.inserm.fr/inserm-01081701/document
http://www.hal.inserm.fr/inserm-01081701/file/2013%2C%20Waltz%20-%20Is%20there%20a%20relationship%20between%20the%20hematocrit-to-viscosity%20ratio%20and%20microvascular%20oxygenation%20in%20brain%20and%20muscle.pdf
PUBMED : 23719422

Éditeur(s) : Copernicus Gesellschaft Mbh
Résumé : From 10 to 8 ka BP (thousand years before present), paleoclimate records show an atmospheric and oceanic cooling in the high latitudes of the Southern Hemisphere. During this interval, temperatures estimated from proxy data decrease by 0.8 degrees C over Antarctica and 1.2 degrees C over the Southern Ocean. In order to study the causes of this cooling, simulations covering the early Holocene have been performed with the climate model of intermediate complexity LOVECLIM constrained to follow the signal recorded in climate proxies using a data assimilation method based on a particle filtering approach. The selected proxies represent oceanic and atmospheric surface temperature in the Southern Hemisphere derived from terrestrial, marine and glaciological records. Two mechanisms previously suggested to explain the 10-8 ka BP cooling pattern are investigated using the data assimilation approach in our model. The first hypothesis is a change in atmospheric circulation, and the second one is a cooling of the sea surface temperature in the Southern Ocean, driven in our experimental setup by the impact of an increased West Antarctic melting rate on ocean circulation. For the atmosphere hypothesis, the climate state obtained by data assimilation produces a modification of the meridional atmospheric circulation leading to a 0.5 degrees C Antarctic cooling from 10 to 8 ka BP compared to the simulation without data assimilation, without congruent cooling of the atmospheric and sea surface temperature in the Southern Ocean. For the ocean hypothesis, the increased West Antarctic freshwater flux constrainted by data assimilation (+100 mSv from 10 to 8 ka BP) leads to an oceanic cooling of 0.7 degrees C and a strengthening of Southern Hemisphere westerlies (+6 %). Thus, according to our experiments, the observed cooling in Antarctic and the Southern Ocean proxy records can only be reconciled with the reconstructions by the combination of a modified atmospheric circulation and an enhanced freshwater flux.
Climate Of The Past (1814-9324) (Copernicus Gesellschaft Mbh), 2013 , Vol. 9 , N. 2 , P. 887-901

Droits : Author(s) 2013. CC Attribution 3.0 License.
http://archimer.ifremer.fr/doc/00181/29203/27584.pdf
DOI:10.5194/cp-9-887-2013
http://archimer.ifremer.fr/doc/00181/29203/

Éditeur(s) : HAL CCSD De Gruyter
Résumé :  
Experimental results are presented with single nail joints of gonfolo rose which were loaded at different grain angles and compared to results obtained by Eurocode V. A wide range of embedding strength tests was conducted. The embedding behaviour across the grain was also investigated with a specific test apparatus. The results were analysed and modelled in terms of strength. Initial loading and unloading stiffness of the timber have been taken into account. The embedment strength of the nails varied according to the angle between the direction of loading and that to the grain. This work is part of a larger research project to establish a computer program for the prediction of stiffness and limit strengths of all timber-to-timber and timber-to-steel joints.
ISSN: 0018-3830

hal-01032183
https://hal.archives-ouvertes.fr/hal-01032183
DOI : 10.1515/HF.2008.013

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
A detailed rock-magnetic and archeointensity study was carried out on materials baked by a western Mexican artisan following traditional techniques to produce faithful reproductions of archeological pieces of the Michoacan region (Western Mesoamerica). The field strength at the site (41.0 +/- 0.51 mu T) was measured with a fluxgate magnetometer and the temperature of the furnace during the baking process was monitored continually by means of a thermocouple placed in the middle of the baking cavity.;Rock-magnetic experiments performed on the raw material (clay and paste) and on in situ prepared baked ceramics and bricks included measurement of thermomagnetic curves (susceptibility and strong-field magnetization versus temperature), first-order reversal curves (FORC), anisotropy of magnetic susceptibility (AMS) and anisotropy of thermoremanent magnetization (A-TRM). Magnetite and probably hematite are present in the samples as carriers of the remanence. Hysteresis ratios suggest that the samples fall in the pseudo-single-domain grain size region, which may indicate a mixture of multidomain and a significant amount of single-domain grains.;Ceramic pieces and brick fragments were subjected to the Thellier-Coe archeointensity method and to an alternative paleointensity experiment, with a TRIAXE magnetometer, in order to check whether they are faithful recorders of the local geomagnetic field strength.;Mean raw-intensity of sample M1 (pottery) overestimates a 7% the expected site intensity, while those corresponding to the brick samples (LQ1 and LQ2) underestimate it 15%. Brick sample LNQ shows a slightly lower intensity (7%), but agrees with the expected site intensity within the experimental uncertainty. The intensity retrieved from the volcanic fragment also included closely reproduces the expected intensity. After A-TRM and cooling-rate corrections, all mean raw values move closer to the expected intensity.;Measurement of temperatures at different parts inside the kiln (bottom and upper parts of both central and peripheral parts) revealed the existence of significant thermal gradients, similar to those observed in ovens from other localities. Different cooling rates are then expected in a single oven.;The scatter in the intensity determinations observed in this study, retrieved from pieces elaborated together in the same oven, could arise from this differentiated cooling rate within the oven and thus, to an inappropriate cooling rate correction in the archeointensity protocol. As this situation was probably reproduced in the baking of ancient ceramic artifacts, a better knowledge of the temperature distribution inside these types of kiln would be desirable in order to choose the appropriate cooling rate correction.
ISSN: 0031-9201

hal-00644559
https://hal.archives-ouvertes.fr/hal-00644559
DOI : 10.1016/j.pepi.2011.06.007

Éditeur(s) : HAL CCSD
Résumé : International audience
This study investigated the possibility of there being differences in respiratory muscle strength and endurance in elite and competition triathletes who have similar maximal oxygen uptakes (V_O2max) and ventilatory thresholds (Thvent). Five internationally-ranked elite, [mean (SD) age 23.8 (1.4) years] and six nationallyand regionally-ranked competition [age 21.1 (1.1) years] male triathletes performed two successive trials: first an incremental cycle test to assess V_O2max and Thvent and second 20 min of cycling followed by 20 min of running (C-R) at intensities higher than 85% V_O2max. Cardioventilatory data were collected every minute during the two trials, using an automated breath-by-breath system. Maximal expiratory and inspiratory (PImax) strength were assessed before and 10 min after C-R from the functional residual capacity. Respiratory muscle endurance was assessed 1 day before and 30 min after C-R by measuring the time limit (tlim). The results showed firstly that during C-R, the competition triathletes had significantly (P<0.05) higher minute ventilation [mean (SEM) 107.4 (3.1) compared to 99.8 (3.7) lÆmin-1], breathing frequency [44.4 (2.0) compared to 40.2 (3.4) Æmin-1] and heart rate [166 (3) compared to 159 (4) beatsÆmin-1] and secondly that after C-R, they had significantly lower PImax [127.1 (4.2) compared to 130.7 (3.0) cmH2O] and tlim [2:35 (0:29) compared to 4:12 (0:20) min] than the elite triathletes. We conclude that, despite similar V_O2max and Thvent, the competition triathletes showed less extensive adaptive mechanisms, including those in the respiratory muscles, than did the elite triathletes. This led to higher ventilation, which appeared to be the cause of the faster development of fatigue in the inspiratory muscles in this group.
EUROPEAN JOURNAL OF APPLIED PHYSIOLOGY

hal-00720562
https://hal.univ-antilles.fr/hal-00720562
https://hal.univ-antilles.fr/hal-00720562/document
https://hal.univ-antilles.fr/hal-00720562/file/BoussanaEJAP02_2_.pdf

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Much debate exists concerning the strength distribution of the continental lithosphere, how it controls lithosphere-scale strain localization and hence enables plate tectonics. No rheological model proposed to date is comprehensive enough to describe both the weakness of plate boundary and rigid-like behaviour of plate interiors. Here we show that the duality of strength of the lithosphere corresponds to different stages of microstructural evolution. Geological constraints on lithospheric strength and large strain numerical experiments reveal that the development of layers containing weak minerals and the onset of grain boundary sliding upon grain size reduction in olivine cause strain localisation and reduce strength in the crust and subcontinental mantle, respectively. The positive feedback between weakening and strain localization leads to the progressive development of weak plate boundaries while plate interiors remain
ISSN: 0040-1951

insu-00949213
https://hal-insu.archives-ouvertes.fr/insu-00949213
https://hal-insu.archives-ouvertes.fr/insu-00949213/document
https://hal-insu.archives-ouvertes.fr/insu-00949213/file/Gueydan_et_al_2014.pdf
DOI : 10.1016/j.tecto.2014.02.005

Éditeur(s) : The Oceanography Society
Résumé : Submarine hydrocarbon seeps are geologically driven "hotspots" of increased biological activity on the seabed. As part of the HERMES project, several sites of natural hydrocarbon seepage in the European seas were investigated in detail, including mud volcanoes and pockmarks, in study areas extending from the Nordic margin, to the Gulf of Cadiz, to the Mediterranean and Black seas. High-resolution seabed maps and the main properties of key seep sites are presented here. Individual seeps show ecosystem zonation related to the strength of the methane flux and distinct biogeochemical processes in surface sediments. A feature common to many seeps is the formation of authigenic carbonate constructions. These constructions exhibit various morphologies ranging from large pavements and fragmented slabs to chimneys and mushroom-shaped mounds, and they form hard substrates colonized by fixed fauna. Gas hydrate dissociation could contribute to sustain seep chemosynthetic communities over several thousand years following large gas-release events.
Oceanography (1042-8275) (The Oceanography Society), 2009-03 , Vol. 22 , N. 1 , P. 92-109

Droits : 2009 by The Oceanography Society. All rights reserved. Permission is granted to copy this article for use in teaching and research. Republication, systemmatic reproduction, or collective redistirbution of any portion of this article by photocopy machine, reposting, or other means is permitted only with the approval of The Oceanography Society. Send all correspondence to: info@tos.org or The Oceanography Society, PO Box 1931, Rockville, MD 20849-1931, USA.
http://archimer.ifremer.fr/doc/2009/publication-6387.pdf
DOI:10.5670/oceanog.2009.11
http://archimer.ifremer.fr/doc/00000/6387/