Éditeur(s) : HAL CCSD AGU and the Geochemical Society
Résumé : International audience
Continental rifts and passive continental margins show fundamental along-axis segmentation patterns that have been attributed to one or a number of different processes: extensional fault geometry, variable stretching along strike, preexisting lithospheric compositional and structural heterogeneities, oblique rifting, and the presence or absence of eruptive volcanic centers. The length and width scales of the rift stage fault-bounded basin systems change during the late evolution of the new plate boundary, and the role of magmatism may increase as rifting progresses to continental rupture. Along obliquely spreading ridges, first-order mid-ocean ridge geometries originate during the synrift stage, indicating an intimate relationship between magma production and transform fault spacing and location. The Gulf of Aden rift is a young ocean basin in which the earliest synrift to breakup structures are well exposed onshore and covered by thin sediment layers offshore. This obliquely spreading rift is considered magma-poor and has several large-offset transforms that originated during late stage rifting and control the first-order axial segmentation of the spreading ridge. Widely spaced geophysical transects of passive margins that produce only isolated 2-D images of crust and uppermost mantle structure are inadequate for evaluation of competing rift evolution models. Using closely spaced new geophysical and geological observations from the Gulf of Aden we show that rift sectors between transforms have a large internal variability over short distances (∼10 km): the ocean-continent transition (OCT) evolves from a narrow magmatic transition to wider zones where continental mantle is probably exhumed. We suggest that this small-scale variability may be explained (1) by the distribution of volcanism and (2) by the along-strike differences in time-averaged extension rate of the oblique rift system. The volcanism may be associated with (1) the long-offset Alula-Fartak Fracture Zone, which may enhance magma production on its younger side, or (2) channeled flow from the Afar plume material along the newly formed OCT and the spreading ridge. Oblique extension and/or hot spot interactions may thereby have a significant control on the styles of rifting and continental breakup and on the evolution of many magma-poor margins.
ISSN: 1525-2027

hal-00504866
https://hal.archives-ouvertes.fr/hal-00504866
https://hal.archives-ouvertes.fr/hal-00504866/document
https://hal.archives-ouvertes.fr/hal-00504866/file/G3-Leroy_al-2010.pdf
DOI : 10.1029/2009GC002963

Éditeur(s) : HAL CCSD Copernicus Publications
Résumé : Drilling an ultra-deep hole in an intact portion of oceanic lithosphere, through the crust to the Mohorovičić discontinuity (the ‘Moho'), and into the uppermost mantle is along-standing ambition of scientific ocean drilling (Bascom,1961; Shor, 1985; Ildefonse et al., 2007). It remains essential to answer fundamental questions about the dynamics of the Earth and global elemental cycles. The global system of mid-ocean ridges and the new oceanic lithosphere formed at these spreading centers are the principal pathways for energy and mass exchange between the Earth's interior, hydrosphere, and biosphere. Bio-geochemical reactions between the oceans and oceanic crust continue from ridge to subduction zone, and the physical and chemical changes to the ocean lithosphere provide inventories of these thermal, chemical, and biological exchanges.
ISSN: 1816-8957

hal-00564847
https://hal.archives-ouvertes.fr/hal-00564847
DOI : 10.2204/iodp.sd.10.07.2010

Éditeur(s) : Gauthier-villars
Résumé : The aim of the HYFIFLUX-SONNE 99 cruise was the geological, biological and chemical study of the 2 triple-junctions characterizing the oceanic accretion in the North Fiji Basin. Multibeam bathymetric coverage, in situ observations and sampling confirmed the existence of an active spreading ridge immediately west of the Fiji islands (WFR), and gave an evaluation of the magmatic and hydrothermal activity of the central ridge (CSR). New hydrothermal sites have been discovered and sampled.
La campagne HYFIFLUX-SONNE 99 a eu pour objectif l'étude géologique, biologique et chimique des 2 triples jonctions qui caractérisent l'accrétion océanique dans le bassin nord fidjien. La couverture bathymétrique multifaisceaux, l'observation in situ et l'échantillonnage ont permis de confirmer l'existence d'un axe d'accrétion actif immédiatement à l'Ouest des îles Fidji (WFR), et d'évaluer l'activité magmatique et hydrothermale à l'extrémité nord de l'axe central (CSR). De nouveaux sites hydrothermaux ont été découverts et échantillonnés.
Comptes Rendus de l'Academie des Sciences Serie II Fascicule A-Sciences de la Terre et des Planetes (Gauthier-villars), 1995-08 , Vol. 321 , N. 3 , P. 239-246

Droits : Académie des Sciences
http://archimer.ifremer.fr/doc/00183/29453/27843.pdf
http://archimer.ifremer.fr/doc/00183/29453/

Éditeur(s) : Gauthier-villars
Résumé : The submersible-study of four segments of the East Pacific Rise between 17 degrees and 18 degrees 40'S, where the spreading rate is greater than 150 mm/a, allows us to confirm the variability of the accretion processes. The segment between 17 degrees and 17 degrees 30'S shows an intense present-day magmatic activity. The one between 18 degrees 10' and 18 degrees 22'S shows a mainly tectonic activity. The segment between 18 degrees 22' and 18 degrees 37'S is an intermediate stage with an axial graben in which fresh lavas were emplaced by an extremely young eruption. On all the segments the hydrothermal activity exists ranging from shimmering water up to black smokers, It is associated with different stages of animal colonization.
L'étude par le submersible Nautile de quatre segments de la Dorsale Est Pacifique entre 17° et 18°40'S où le taux d'ouverture est de plus de 150 mm/an, permet de confirmer la variabilité des processus de l'accrétion dans le temps et dans l'espace. Le segment compris entre 17° et 17°30'S montre une intense activité magmatique actuelle ou sub-actuelle, celui compris entre 18°10' et 18°22'S montre une activité essentiellement tectonique et celui compris entre 18°22' et 18°37'S une combinaison des deux, le graben d'extension étant partiellement rempli de laves émises lors d'une éruption extrêmement récente. Partout existe une activité hydrothermale, allant de l'émission de fluides moirés à des fumeurs noirs, associée à divers stades de colonisation animale.
Comptes Rendus de l'Academie des Sciences Serie II (1251-8069) (Gauthier-villars), 1994-10 , Vol. 319 , N. 7 , P. 811-818

Droits : Académie des Sciences
http://archimer.ifremer.fr/doc/00183/29458/27840.pdf
http://archimer.ifremer.fr/doc/00183/29458/

Éditeur(s) : American Geophysical Union
Résumé : We use seismic reflection and rock sample data to propose that the first-order physiography of New Caledonia Trough and Norfolk Ridge formed in Eocene and Oligocene time and was associated with the onset of subduction and back-arc spreading at the Australia-Pacific plate boundary. Our tectonic model involves an initial Cretaceous rift that is strongly modified by Cenozoic subduction initiation. Hence, we are able to explain (1) complex sedimentary basins of inferred Mesozoic age; (2) a prominent unconformity and onlap surface of middle Eocene to early Miocene age at the base of flat-lying sediments beneath the axis of New Caledonia Trough; (3) gently dipping, variable thickness, and locally deformed Late Cretaceous strata along the margins of the trough; (4) platform morphology and unconformities on either side of the trough that indicate a phase of late Eocene to early Miocene uplift to near sea level, followed by rapid Oligocene and Miocene subsidence of similar to 1100-1800 m; and (5) seismic reflection facies tied to boreholes that suggest absolute tectonic subsidence at the southern end of New Caledonia Trough by 1800-2200 m since Eocene time. The Cenozoic part of the model involves delamination and subduction initiation followed by rapid foundering and rollback of the slab. This created a deep (>2 km) enclosed oceanic trough, similar to 2000 km long and 200-300 km across, in Eocene and Oligocene time as the lower crust detached, with simultaneous uplift and local land development along basin flanks. Disruption of Late Cretaceous and Paleogene strata was minimal during this Cenozoic phase and involved only subtle tilting and local reverse faulting or folding. Basin formation was possible through the action of at least one detachment fault that allowed the lower crust to either be subducted into the mantle or exhumed eastward into Norfolk Basin. We suggest that delamination of the lithosphere, with possible mixing of the lower crust back into the mantle, is more widespread than previously thought and may be commonly associated with subduction initiation, such as Cenozoic events in the Mediterranean and western Pacific.
Tectonics (0278-7407) (American Geophysical Union), 2010-03 , Vol. 29 , N. TC2004 , P. 1-16

Droits : Copyright 2010 by the American Geophysical Union.
http://archimer.ifremer.fr/doc/00001/11271/9283.pdf
DOI:10.1029/2009TC002476
http://archimer.ifremer.fr/doc/00001/11271/

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
During ODP Leg 209, a magma-starved area of the Mid-Atlantic Ridge (MAR) was drilled in the vicinity of the Fifteen-Twenty Fracture Zone (FZ) that offsets one of the slowest portions of the spreading ridge. We present here the results of a bulk rock multi-elemental study of 27 peridotites drilled at Sites 1272 and 1274 (to the south and the north of the FZ, respectively). The peridotites comprise mainly of harzburgites with minor dunites. Clinopyroxene (Cpx), which is interstitial and interpreted as secondary, is observed in Site 1274 peridotites. Sites 1272 and 1274 peridotites have low Al2O3 contents (<= 1 anhydrous wt.%), high Mg# (>91.5), and bulk rock trace elements compositions mostly below 0.1 x primitive mantle (PM). These peridotites, and in particular Site 1272 peridotites, represent the most depleted peridotites yet sampled at a slow spreading ridge. Their compositions indicate high degrees of partial melting and melt extraction. A single open-system melting event (melting plus percolation of melts produced within upwelling mantle) can explain their highly depleted yet linear chondrite-normalized REE patterns, characterized by a steady depletion from HREE to LREE. Late melt-rock reactions and precipitation of Cpx explains the slightly less depleted compositions of Site 1274 peridotites. Hence, the differences in composition between Sites 1272 and 1274 peridotites do not provide evidence for regional variations in the degrees of partial melting from the south to the north of the FZ. The occurrence of highly refractory peridotites in the Fifteen-Twenty area suggests we sampled a more actively convecting mantle than generally supposed below slow spreading centers.
ISSN: 0012-821X

hal-00412001
https://hal.archives-ouvertes.fr/hal-00412001
DOI : 10.1016/j.epsl.2007.11.058

Éditeur(s) : HAL CCSD AGU and the Geochemical Society
Résumé : International audience
The 1415 m deep IODP Hole U1309D (Mid-Atlantic Ridge, 30 degrees N) is the second deepest hole drilled into slow spreading oceanic lithosphere. The recovered section comprises essentially gabbroic rocks, with a large range of compositions. The most primitive end-members of the gabbroic sequence, herein referred to as olivine-rich troctolites (ol > similar to 70%), have textures and geochemical compositions intermediate between that of mantle peridotites and primitive cumulates, indicative of melt impregnation processes. We carried out a detailed microstructural study to further characterize the petrogenetic processes leading to their formation, as well as discuss their mode of emplacement and relationship with neighboring mantle lithosphere. In olivine-rich troctolites, olivines range from coarse-grained subhedral crystals, commonly containing well-developed subgrains, to medium-grained rounded crystals with fewer or no substructures. They are embedded in large, undeformed pyroxene and plagioclase poikiloblasts. Olivine substructures reveal dislocation creep that is consistent with activation of the main high-temperature slip systems, dominantly (010)[100]. Olivine crystallographic preferred orientation is very weak but generally shows a relatively stronger, uncommon [001] concentration. These unusual olivine fabrics are interpreted as resulting from melt impregnation of a previously deformed olivine matrix: the solid olivine framework is disrupted by olivine corrosion along grain and subgrain boundaries, and the high-temperature plastic fabric is modified in a liquid-dominated regime. Based on mineral composition and fabrics and in comparison with what is observed in impregnated mantle rocks elsewhere, we posit that olivine represents relicts of mantle peridotites disaggregated by large melt influx, although the mantle origin of olivine is not unequivocally demonstrated yet. Whatever the initial lithology, impregnation by large volumes of melt has strongly modified the original composition and microstructure. If the mantle origin hypothesis is correct, the original olivine fabric could have been efficiently weakened by dunitization prior to disruption of the olivine framework by melt impregnation. Incorporation, at the base of the lithosphere, of small slivers of impregnated dunite into gabbroic sections, trapped between successive igneous units, may be a common mechanism of lower crustal accretion at slow spreading ridges. Extensive melt-rock interaction processes are expected to contribute significantly to the final chemical composition of erupted lavas.
ISSN: 1525-2027

hal-00496391
https://hal.archives-ouvertes.fr/hal-00496391
DOI : 10.1029/2009GC002995

Éditeur(s) : HAL CCSD Oxford University Press (OUP)
Résumé : Gravity data and P-wave teleseismic traveltime residuals from 29 temporary broad-band stations spread over the northern margin of the Gulf of Aden (Dhofar region, Oman) were used to image lithospheric structure. We apply a linear relationship between density and velocity to provide consistent density and velocity models from mid-crust down to about 250 km depth. The accuracy of the resulting models is investigated through a series of synthetic tests. The analysis of our resulting models shows: (1) crustal heterogeneities that match the main geological features at the surface; (2) the gravity edge effect and disparity in anomaly depth locations for layers at 20 and 50 km; (3) two low-velocity anomalies along the continuation of Socotra-Hadbeen and Alula-Fartak fracture zones between 60 and 200 km depth; and (4) evidence for partial melting (3-6 per cent) within these two negative anomalies. We discuss the presence of partial melting in terms of interaction between the Sheba ridge melts and its along-axis segmentation.
ISSN: 0956-540X

hal-00456048
https://hal.archives-ouvertes.fr/hal-00456048
DOI : 10.1111/j.1365-246X.2009.04438.x

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The Oman ophiolite, a fossil fast-spreading oceanic ridge had a melt lens perched on top of the magma chamber wherein the gabbro unit was crystallizing. In ophiolites, this melt lens is reduced to a horizon that has been identified in the field. The gabbros that subsided from the lens horizon and drifted out of the magma chamber, while developing a steep magmatic foliation, provide insights into the active melt lens processes. A gabbro, sampled right below the horizon where the lens closed, has virtually not subsided and it offers a direct glance at the floor of the lens. Below, the deeper the gabbros are sampled, the more they have subsided before drifting out of the magma chamber, and the closer they derive from the center of the lens floor. Cross sections in these gabbros record successive events occurring within the lens. In particular, anorthosite layers and lenses that are interlayered within the foliated gabbros record the intrusion of a new melt where plagioclase is the first mineral to crystallize on liquidus. Detailed mapping of anorthosite swarms suggest that melt intrusions are massive, lasting less than 4 yr and that their frequency is similar to 100 yr. Their large volume controls the stability of melt lenses. A new melt surge induces rapid and large inflation of the lens. Melt lens deflation follows, that is due to the ongoing process of crustal accretion both in the gabbro unit by continuous subsidence of a thick gabbroic mush from the lens floor, and in the lid above the lens roof by sheeted dike intrusions feeding basalt extrusions at the higher frequency of similar to 10 yr.
ISSN: 0012-821X

hal-00617444
https://hal.archives-ouvertes.fr/hal-00617444
DOI : 10.1016/j.epsl.2011.01.029

Éditeur(s) : HAL CCSD
Résumé : National audience
New experimental data on electrical and anelastic properties of oceanic rocks at high pressures and temperatures are compared with the field data of seismic and electrical anomalies observed at oceanic spreading centers. The laboratory results of electrical conductivity and internal friction on gabbro and peridotites permit to estimate a degree of partial melting and maximum temperature in axial magma chambers (12-15% of melting at 1155-1165°C) and at the upper boundary of a source zone at the depth of 40-90 km (less than 5% of melting in the absence of pyroxene crystals and up to 11-14% in the pyroxene reach rocks at 1360-1370°C) at mid-oceanic ridges.
ISSN: 0934-6554

hal-01322920
http://hal.univ-reunion.fr/hal-01322920

Éditeur(s) : HAL CCSD Taylor & Francis
Résumé : International audience
ternational Ocean Discovery Program (IODP) Expedition 352 recovered a high-fidelity record of volcanism related to subduction initiation in the Bonin fore-arc. Two sites (U1440 and U1441) located in deep water nearer to the trench recovered basalts and related rocks; two sites (U1439 and U1442) located in shallower water further from the trench recovered boninites and related rocks. Drilling in both areas ended in dolerites inferred to be sheeted intrusive rocks. The basalts apparently erupted immediately after subduction initiation and have compositions similar to those of the most depleted basalts generated by rapid sea-floor spreading at mid-ocean ridges, with little or no slab input. Subsequent melting to generate boninites involved more depleted mantle and hotter and deeper subducted components as subduction progressed and volcanism migrated away from the trench. This volcanic sequence is akin to that recorded by many ophiolites, supporting a direct link between subduction initiation, fore-arc spreading, and ophiolite genesis.
ISSN: 0020-6814

hal-01685628
https://hal.archives-ouvertes.fr/hal-01685628
DOI : 10.1080/00206814.2016.1276482

Éditeur(s) : HAL CCSD AGU and the Geochemical Society
Résumé : International audience
[1] Statistical analysis of modern oceanic subduction zone parameters, such as the age of a downgoing plate or the absolute plate motions, is performed in order to investigate which parameter controls the dip of a slab and, conversely, what the influence of slab geometry is on upper plate behavior. For that purpose, parameters have been determined from global databases along 159 transects from all subduction zones that are not perturbed by nearby collision or ridge/plateau/seamount subduction. On the basis of tomographic images, slabs that penetrate through, or lie on, the 670 km discontinuity are also identified. The results of the statistical analysis are as follows: (1) Back-arc stress correlates with slab dip, i.e., back-arc spreading is observed for deep dips (deeper than 125 km) larger than 50°, whereas back-arc shortening occurs only for deep dips less than 30°. (2) Slab dip correlates with absolute motion of the overriding plate. The correlation is even better when the slab lies on, or even more penetrates through, the 670 km discontinuity. (3) Slabs dip more steeply, by about 20° on average, beneath oceanic overriding plates than beneath continental ones. (4) Slabs dip more steeply on average by about 10° near edges. (5) Slab dip does not correlate with the magnitude of slab pull, the age of subducting lithosphere at the trench, the thermal regime of the subducting lithosphere, the convergence rate, or the subduction polarity (east versus west). The present study provides evidence that the upper plate absolute motion plays an important role on slab dip, as well as on upper plate strain. Retreating overriding plates are often oceanic ones and thus may partially explain the steeper slab dips beneath oceanic upper plates. One can infer that low slab dips correlate well with compression in continental advancing upper plates, whereas steep dips are often associated with extension in oceanic retreating upper plates. Excess weight of old slabs is often counterbalanced by other forces, probably asthenospheric in origin, such as lateral mantle flow near slab edges or anchor forces, to determine slab dip. Components: 12,676 words, 13 figures, 1 table.
ISSN: 1525-2027

hal-01261567
https://hal.archives-ouvertes.fr/hal-01261567
https://hal.archives-ouvertes.fr/hal-01261567/document
https://hal.archives-ouvertes.fr/hal-01261567/file/lallemandG32005.pdf
DOI : 10.1029/2005GC000917

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
At oceanic spreading centers, interactions between magma and hydrothermal convecting systems trigger major physical, thermal, and chemical exchanges. The two-pyroxene hornfels recovered from the base of the sheeted dike sequence at Integrated Ocean Drilling Program (IODP) Site 1256 (equatorial Eastern Pacific) are interpreted as a conducting boundary layer between the underlying axial melt lens and the hydrothermally cooled sheeted dikes. They are cut by numerous small, felsic veins, which were recently interpreted as a product of hydrous partial melting of sheeted dikes. Here, we present trace element compositions of products (melts and residues) of hydrous partial melting experiments using basalts and hornfels from IODP Site 1256 as starting material. The experimental products generated between 910 °C and 970 °C match the natural lithologies from Site 1256 in terms of major and trace element compositions. The compositions of the anatectic melts correspond to the compositions of the felsic veins, while the residual minerals match the compositions of the two-pyroxene hornfels, evidencing that hydrous partial melting is an important magmatic process in the gabbro/dike transition of fast-spreading mid-oceanic ridges. Our results complement previous experimental studies on anatectic processes occurring at the roof of the magma chambers from fast-spreading mid-ocean ridges. Moreover, calculations of mixing and assimilation fractional crystallization using the experimental partial melts as contaminant/assimilant showed that anatectic melts can only be a minor contributor to the contamination process.
ISSN: 0024-4937

hal-01419949
https://hal.archives-ouvertes.fr/hal-01419949
DOI : 10.1016/j.lithos.2016.05.001

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The Gibraltar arc, spans a complex portion of the Africa-Eurasia plate boundary marked by slow oblique convergence and intermediate and deep focus seismicity. The seemingly contradictory observations of a young extensional marine basin surrounded by an arcuate fold-and-thrust belt, have led to competing geodynamic models (delamination and subduction). Geophysical data acquired in the past decade provide a test for these models and support a narrow east-dipping, subduction zone. Seismic refraction studies indicate oceanic crust below the western Gulf of Cadiz. Tomography of the upper mantle reveals a steep, east-dipping high P-wave velocity body, beneath Gibraltar. The anisotropic mantle fabric from SKS splitting shows arc-parallel "fast directions", consistent with toroidal flow around a narrow, westward retreating subducting slab. The accompanying WSW advance of the Rif-Betic mountain belt has constructed a thick pile of deformed sediments, an accretionary wedge, characterized by west-vergent thrust anticlines. Bathymetric swath‐mapping images an asymmetric embayment at the deformation front where a 2 km high basement ridge has collided. Subduction has slowed significantly since 5 Ma, but deformation of recent sediments and abundant mud volcanoes suggest ongoing activity in the accretionary wedge. Three possible origins for this deformation are discussed; gravitational spreading, overall NW-SE convergence between Africa and Iberia and finally a WSW tectonic push from slow, but ongoing roll-back subduction. In the absence of arc volcanism and shallow dipping thrust type earthquakes, evidence in favor of present-day subduction can only be indirect and remains the object of debate. Continued activity of the subduction offers a possible explanation for great (M > 8.5) earthquakes known to affect the area, like the famous 1755 Great Lisbon earthquake. Recent GPS studies show SW motion of stations in N Morocco at velocities of 3-6 mm/yr indicating the presence of an independent block, a "Rif-Betic-Alboran" microplate, situated between Iberia and Africa.
ISSN: 0040-1951

insu-00769762
https://hal-insu.archives-ouvertes.fr/insu-00769762
DOI : 10.1016/j.tecto.2012.08.038

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Deep crustal and mantle rocks are exhumed in core complex mode of extension in three types of structures: metamorphic core complexes, oceanic core complexes and magma poor passive margins. Using available analogue and numerical models and their comparison with natural examples, the present paper reviews the mechanical processes involved in these different types of extensional setting. Three main aspects are considered: i) the primary role of lithosphere rheology, ii) the lithosphere-scale patterns of progressive deformation that lead to the exhumation of deep metamorphic or mantle rocks and iii) the initiation and development of detachment zones. Crustal core complexes develop in continental lithospheres whose Moho temperature is higher than 750 °C with “upper crust-dominated” strength profiles. Contrary to what is commonly believed, it is argued from analogue and numerical models that detachments that accommodate exhumation of core complexes do not initiate at the onset of extension but in the course of progressive extension when the exhuming ductile crust reaches the surface. In models, convex upward detachments result from a rolling hinge process. Mantle core complexes develop in either the oceanic lithosphere, at slow and ultra-slow spreading ridges, or in continental lithospheres, whose initial Moho temperature is lower than 750 °C, with “sub-Moho mantle-dominated” strength profiles. It is argued that the mechanism of mantle exhumation at passive margins is a nearly symmetrical necking process at lithosphere scale without major and permanent detachment, except if strong strain localization could occur in the lithosphere mantle. Distributed crustal extension, by upper crust faulting above a décollement along the ductile crust increases toward the rift axis up to crustal breakup. Mantle rocks exhume in the zone of crustal breakup accommodated by conjugate mantle shear zones that migrate with the rift axis, during increasing extension.
ISSN: 0040-1951

insu-01610186
https://hal-insu.archives-ouvertes.fr/insu-01610186
https://hal-insu.archives-ouvertes.fr/insu-01610186/document
https://hal-insu.archives-ouvertes.fr/insu-01610186/file/brun-tect-2017.pdf
DOI : 10.1016/j.tecto.2017.09.017

Éditeur(s) : HAL CCSD AGU and the Geochemical Society
Résumé : International audience
The ODP/IODP multileg campaign at ODP Site 1256 (Cocos plate, eastern equatorial Pacific) provides the first continuous in situ sampling of fast spreading ocean crust from the extrusive lavas, through the sheeted dikes and down into the uppermost gabbros. This paper focuses on a detailed petrographic and microanalytical investigation of the gabbro section drilled during IODP Expedition 312. The marked patchy and spotty features that can be observed in many Hole 1256D gabbros is mostly due to a close association of two different lithological domains in variable amounts: (1) subophitic domains and (2) a granular matrix. Major and trace element mineral compositions, geothermometry, and petrological modeling suggest that subophitic and granular domains follow one single magma evolution trend formed by in situ fractionation. The subophitic domains correspond to the relative primitive, high-temperature end-member, compositionally similar to the basalts and dikes from the extrusive unit upsection, while the granular domains fit with a magma evolution by crystal fractionation to lower temperatures, up to a degree of crystallization of similar to 80%. Our results support the following scenario for the fossilization of the axial melt lens at ODP Site 1256: relatively primitive MORB melts under near-liquidus conditions fill the melt lens and feed the upper, extrusive crust. Near the melt lens-sheeted dike boundary at lower temperatures, crystallization starts with first plagioclase before clinopyroxene in a mushy zone forming the subophitic domains. At decreasing temperatures, the subophitic domains continue to crystallize, finally forming a well-connected framework. Evolved, residual melt is finally trapped within the subophitic network, crystallizing at near-solidus conditions to the granular matrix. Another important textural feature in Hole 1256D gabbros is the presence of microgranular domains which are interpreted as relics of stoped/assimilated sheeted dikes (transformed to "granoblastic dikes" by contact metamorphism). All these different domains can be observed in close association, often at the thin section scale, demonstrating the extremely complex petrological record of combined crystallization/assimilation processes ongoing in the axial melt lens. Very similar gabbros with a marked spotty/patchy appearance, and bearing the same close association of lithological domains as observed at Site 1256, are known in the so-called "varitextured gabbro" unit from the Oman Ophiolite located at the same structural level, between cumulate gabbros and granoblastic dikes. The close petrological similarity of the gabbro/dike transition between both IODP Hole 1256D and the Oman ophiolite suggests that in situ fractionation and dike assimilation/contamination are major magmatic processes controlling the dynamics and fossilization of the axial melt lens at fast spreading oceanic ridges.
ISSN: 1525-2027

hal-00644798
https://hal.archives-ouvertes.fr/hal-00644798
DOI : 10.1029/2011GC003655

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The New Caledonia ophiolite (Peridotite Nappe) is dominated by mantle lithologies, composed of forearc-related refractory harzburgites and minor lherzolites in both the spinel and plagioclase facies.In this study, a comprehensive geochemical data set (major, trace elements and Sr–Nd isotopes) is used to constrain the mantle evolution of the lherzolites and their relationships with the basalts from the Poya Terrane, which tectonically underlies the mantle rocks. The majority of the lherzolites are low-strain porphyroclastic tectonites. They likely record an asthenospheric origin followed by re-equilibration at lithospheric conditions, as supported by geothermometric estimates (T = 1100–940 °C and 920–890 °C for porphyroclastic and neoblastic spinel-facies assemblages, respectively). Olivine composition (Fo = 88.5–90.0 mol%), spinel Cr# ([molar 100 • Cr/(Cr + Al)] = 13–17) and relatively high amounts (7–8 vol%) of Al2O3- and Na2O-rich clinopyroxene (up to 0.5 and 6.5 wt.%, respectively) indicate a moderately depleted geochemical signature for the spinel lherzolites. Bulk rock and clinopyroxene rare earth elements (REE) patterns display a typical abyssal-type signature, i.e. steeply plunging LREE accompanied by nearly flat HREE to MREE. Clinopyroxene REE compositions of the spinel lherzolites may be reproduced by small amounts of fractional melting of a garnet lherzolite precursor (~ 4%), followed by 4%–5% melting in the spinel peridotite field. The plagioclase lherzolites show melt impregnation microstructures, Cr- and Ti-rich spinels and incompatible trace element enrichments (REE, Ti, Y, and Zr) in bulk rocks and clinopyroxenes. Impregnation modelling for these elements suggests that the plagioclase lherzolites originated from residual spinel lherzolites by entrapment of highly depleted (non-aggregated) MORB melt fractions in the shallow oceanic lithosphere. Nd isotope compositions of the investigated peridotites are consistent with derivation from an asthenospheric mantle source that experienced a recent MORB-producing depletion event. This evolution was most likely accomplished in a spreading ridge. However, geochemical trace element modelling and Nd isotopes do not support a genetic mantle–crust link between the lherzolites and enriched-MOR-type basalts from the Poya Terrane.
ISSN: 0024-4937

hal-01412440
https://hal.archives-ouvertes.fr/hal-01412440
DOI : 10.1016/j.lithos.2016.04.030

Éditeur(s) : HAL CCSD
Résumé : International audience
The « METYSS » cruise was carried out in June 2009 onboard the R/V « Téthys II » along the eastern Sardinian and south-eastern Corsican margins, western Tyrrhenian Sea, in order to better constrain the potential links between deformation related to either crustal tectonics or salt tectonics and sediment accumulation, especially during the Messinian and Plio-Quaternary times. We acquired 15 high-resolution seismic reflection profiles (about 1200 km in cumulative length) along the south-eastern Corsican margin, immediately north of the Bonifacio Strait and along the upper and middle parts of the eastern Sardinian margin, from the continental slope to the Cornaglia Terrace. The Tyrrhenian Sea is considered as a Neogene back-arc basin that opened during continental rifting and oceanic spreading related to the eastward migration of the Apennine subduction system from Tortonian to Pliocene times (Jolivet et al., 2006). Rifting of the Tyrrhenian Sea started first along the Eastern Sardinian margin during the Tortonian-Messinian times and therefore the series of that age should be considered as syn-rift sediments (Sartori et al., 2004). The « METYSS » seismic profiles clearly illustrate that this part of the Tyrrhenian was highly segmented during the rifting stage by N-S trending normal faults delineating ridges (e.g., Baronie Ridge) and basins (e.g., Sardinian Basin and Cornaglia Terrace), as previously described for example by Thommeret (1999) and Sartori et al. (2004). The Messinian sedimentary units and especially the « Upper Unit » (UU, Lofi et al., this congress, corresponding to the « Upper Evaporites » in the previous literature) are, without any doubt, of syn-rift age, as they display a fan-shaped stratal geometry. The Mobile Unit (MU, Lofi et al., this congress), i.e. the Messinian halite, is clearly imaged in the study area and its spatial repartition can be outlined. The highly-variable thickness of the confined salt basins could be due to the initial basin geometry (i.e. before the Messinian salinity Crisis) or to the syn-rift character of the deposition. Southeastward of the study area, in the vicinity of the Cornaglia Seamount, salt tectonics appears surprisingly vigorous. More surprisingly, several normal faults seem to have remained active in recent times, if not even at present time. Fault slip has been recorded by bathymetric scarps and associated footwall debris flows interfingered within the Plio-Quaternary sequence, even though the eastern Sardinian margin is usually considered to be passive now. Moreover, some amount of tectonic inversion is visible on some normal faults that show contractional or transpressional components of late slip. In addition, this “post-rift” deformation can be illustrated within the Plio-Quaternary sequence by a regional unconformity. Consequently, numerous mass-transport deposits and channel-levees systems observed in the Plio-Quaternary cover could be partly controlled by tectonic activity. These very preliminary results require further investigations in order to better decipher the role of crustal tectonics and salt tectonics, salt-related structures being very efficient markers to discriminate between the respective contribution of gravity-driven, salt tectonics and deep-seated, crustal tectonics (Gaullier et al., 2010). Finally, we aim to precisely determine the relative vertical movements (tilting, subsidence, magmatism. . . ) and geodynamical history of the different segments of the area since 6 Ma.
Geophysical Research Abstracts
Vienne, Austria

hal-00537828
https://hal-brgm.archives-ouvertes.fr/hal-00537828
https://hal-brgm.archives-ouvertes.fr/hal-00537828/document
https://hal-brgm.archives-ouvertes.fr/hal-00537828/file/EGU2010-15469_ref6821.pdf

Éditeur(s) : HAL CCSD
Résumé : The Tyrrhenian Sea is usually interpreted to be a Neogene back-arc basin that opened by continental rifting and oceanic spreading caused by the eastward migration of the Apennine subduction system from Tortonian to Pliocene times. Rifting of the Tyrrhenian Sea started first along the Eastern Sardinian margin during the Tortonian-Messinian times. The " METYSS " project aims at better constraining the relations between crustal tectonics, salt tectonics and sedimentation from Messinian times to present-day. The " METYSS 1 " cruise (2009, R/V "Téthys II"-INSU) allowed us to obtain about 1200 km of high-resolution seismic reflection profiles along the SE Corsican margin, and along the upper and middle parts of the Eastern Sardinian margin, Western Tyrrhenian. This new dataset clearly illustrates that this area has been highly dissected during the rifting stage by N-S trending normal faults delineating ridges and basins, as previously described. The Messinian seismic markers (UU and MU) locally display fan-shaped stratal geometries, but the mechanism responsible for such geometries, i.e., salt tectonics or rifting, has yet to be carefully deciphered. We also mapped the spatial distribution of the mobile salt (MU). The highly variable thickness of the confined salt basins may be related to the initial pre-Messinian basin geometry or to the fact that sediment deposition was syn-rift. Southeastward, salt tectonics appears highly vigorous. More surprisingly, our data demonstrate that some of the major faults have been significantly reactivated during the post-rift period, up to late Quaternary time. Such recent fault activity has been recorded by bathymetric scarps and associated footwall debris flows. Moreover, some of this post-rift deformation can be evidenced within the Plio-Quaternary sequence by a regional unconformity. The post-Miocene deformation style varies greatly between different areas of the margin, and can also be strongly influenced by the presence or absence of mobile Messinian evaporites (MU).
13ème Congrès Français de Sédimentologie
Dijon, France

hal-00657310
https://hal-brgm.archives-ouvertes.fr/hal-00657310