Éditeur(s) : HAL CCSD
Résumé : The heterogeneous nature and sometimes karstified carbonate environments has a direct impact on many environmental issues, such as coastal aquifers affected by saltwater intrusion. At the south of the island of Mallorca (Spain), the Llucmajor carbonate platform offers a privileged site for the study of such intrusions including the experimental site of Campos who meets the intrusion at shallow depth. The characterization of heterogeneous properties passes through a preliminary description of the properties of carbonate reservoirs, including those of the porosity. According to the wide range of sizes of heterogeneities from micrometer to hundreds of meters, the use of multiscale methods is required. This thesis focused on the determination of multiscale porosities from the microporosity to karstic porosity, and of relationships between observation scale changes of these properties. At the micron scale, high-resolution X-ray microtomography allows to extract the microporosity and the microporous network connectivity. At lower resolution (mm), X-ray tomography is also used to study the micro- and macro-porous network at the core scale which is already allocated to number of observations and measurements, including petrophysical. At the borehole scale, the wall images are used to identify the dissolved zones from centimeter macropores to plurimetric karstic cavities. At the larger scale, surface geophysics study the lateral extension of the karsts and heterogeneities. Finally, the porous structure of the studied site is integrated with its wide range of scales into the regional geology of the Llucmajor platform. Thus, the hydrogeophysical observatory set up on the site of Campos to monitor the spreading of salt water in the aquifer is integrated in its geological and petrophysical context, in order to refine the interpretation of its variations of salinity measurements during the time.
La nature hétérogène et parfois karstifiée des milieux carbonatés a un impact direct sur nombre de problématiques environnementales, comme celle des aquifères côtiers affectés par une intrusion d'eau salée. Au sud de l'ile de Majorque (Baléares, Espagne), la plate-forme carbonatée de Llucmajor offre un site privilégié pour l'étude de telles intrusions notamment avec le site expérimental de Campos, qui rencontre l'intrusion à faible profondeur. La caractérisation des propriétés hétérogènes du réservoir passe par une description préalable des propriétés des réservoirs carbonatés et notamment celle de la porosité. Au regard de la large gamme d'échelles d'hétérogénéités allant du micromètre à la centaine de mètre, l'utilisation de méthodes multi-échelles est nécessaire. Ce travail de thèse a porté sur la caractérisation multi-échelle de la porosité, allant de la microporosité à la porosité karstique, et l'établissement de relations entre les changements d'échelles d'observation de ces propriétés. A très petite échelle, la microtomographie haute-résolution à rayons X extrait à l'échelle du micron la microporosité et la connectivité des réseaux microporeux. A plus basse fréquence (celle du mm), la tomographie est également utilisée afin d'étudier le réseau micro- et macroporeux à l'échelle des carottes, à laquelle sont réalisées nombre d'observations et de mesures, notamment pétrophysiques. A l'échelle du puits, les images de paroi permettent d'identifier les zones de dissolution allant des macropores centimétriques aux cavités karstiques plurimétriques. A plus grande échelle, la géophysique de surface permet d'étudier l'extension latérale de ces karsts et hétérogénéités. Enfin, la structure poreuse du site étudié sur cette vaste gamme d'échelles est intégrée à la géologie régionale de la plate-forme de Llucmajor. Ainsi, l'observatoire installé sur le site pour surveiller la propagation de l'eau salée dans l'aquifère a pu être replacé dans son contexte géologique et pétrophysique, afin d'affiner l'interprétation de ses mesures de variations de salinité au cours du temps.
https://tel.archives-ouvertes.fr/tel-00633488

tel-00633488
https://tel.archives-ouvertes.fr/tel-00633488
https://tel.archives-ouvertes.fr/tel-00633488/document
https://tel.archives-ouvertes.fr/tel-00633488/file/TheseHebert.pdf

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Both oedometric and plane-strain tests were performed with parallelepipedic samples made of synthetic granular, cohesive, frictional and dilatant rock analogue material GRAM2. For the first time parallel sets of fractures that have all the characteristics of natural joints were reproduced in the laboratory. The fractures are regularly spaced, normal to σ3, and have plumose morphology very similar to that of natural joints. These fractures can form at tensile stress σ3 much smaller in magnitude than the tensile strength of material and even at slightly compressive σ3. When mean stress σ exceeds a certain value, the fractures become oblique to σ1 (the obliquity increases with σ), forming networks of conjugate shear bands/fractures. These results of plane-strain experiments are in good agreement with those of better controlled conventional axisymmetric tests on a similar material in Chemenda et al. (2011b) and are closer to real geological situations. Both types of experiments are complementary. Their results lead to the conclusion that at least certain categories of natural fractures (including joints, and conjugate shear fractures/bands) were initiated as deformation localization bands. The band orientation is defined by the constitutive properties/parameters (notably the dilatancy factor) that are sensitive to σ.
ISSN: 0040-1951

hal-00795555
https://hal.archives-ouvertes.fr/hal-00795555
DOI : 10.1016/j.tecto.2011.11.021

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
We explore the relations between deformation, annealing, and melt percolation during rifting and the effect of these processes on seismic anisotropy by analyzing the microstructures and crystal preferred orientations (CPO) in a suite of mantle xenoliths from Mega, in the southern end of the Ethiopian rift. Previous geochemical studies on these xenoliths showed evidence for interactions with variable melt types and volumes during the rifting process. The peridotites have dominantly coarse-porphyroclastic microstructures, but coarse granular or partially recrystallized microstructures also occur. The olivine CPO, characterized by orthorhombic to fiber-[100] patterns and moderate intensities, the common occurrence of (100) tilt walls, and the predominance of <0vw> rotation axes accommodating low angle misorientations in olivine support deformation by dislocation creep with dominant activation of the [100](010) system. Annealing (static recrystallization) of variable intensity followed this deformation. Modal enrichment in pyroxenes in > 60% of the studied peridotites corroborates extensive, but spatially heterogeneous reactive melt percolation leading to refertilization of the lithospheric mantle beneath the southern Ethiopian rift. The common interstitial shapes of the pyroxenes and lack of correlation between the pyroxenes and the olivine CPOs in many samples suggest that part of the refertilization is post-kinematic. However, there is no simple relation between reactive melt percolation and annealing of the olivine deformation microstructure. Comparison with data from other xenolith localities points to changes in the metasomatic imprint in the lithospheric mantle along the East African rift system correlated with the evolution in the rift maturity. Seismic properties averaged over all samples show typical lithospheric mantle patterns with fast propagation of P- and polarization of the fast S-waves parallel to the lineation. The anisotropy is moderate (< 6% for P-waves and < 4% for S-waves), implying that aligned melt must contribute to the strong seismic anisotropy measured in the Main Ethiopian rift, north of Mega.
ISSN: 0040-1951

hal-01355918
https://hal.archives-ouvertes.fr/hal-01355918
DOI : 10.1016/j.tecto.2016.05.027

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
We developed a new granular material (MatIV) to study experimentally landscape evolution in active mountain belt piedmonts. Its composition and related physical properties have been determined using empirical criteria derived from the scaling of deformation, erosion-transport and sedimentation natural processes. MatIV is a water-saturated composite material made up with 4 granular components (silica powder, glass microbeads, plastic powder and graphite) whose physical, mechanical and erosion-related properties were measured with different laboratory tests. Mechanical measurements were made on a modified Hubbert-type direct shear apparatus. Erosion-related properties were determined using an experimental set-up that allows quantifying the erosion/sedimentation budget from tilted relaxation topographies. For MatIV, we also investigated the evolution of mean erosion rates and stream power erosion law exponents in 1D as a function of slope.;Our results indicate that MatIV satisfies most of the defined criteria. It deforms brittlely according to the linear Mohr-Coulomb failure criterion and localizes deformation along discrete faults. Its erosion pattern is characterized by realistic hillslope and channelized processes (slope diffusion, mass wasting, channel incision). During transport, eroded particles are sorted depending on their density and shape, which results in stratified alluvial deposits displaying lateral fades variations. To evaluate the degree of similitude between model and nature, we used a new experimental device that combines accretionary wedge deformation mechanisms and surface runoff erosion processes. Results indicate that MatIV succeeded in producing detailed morphological and sedi-mentological features (drainage basin, channel network, terrace, syntectonic alluvial fan). Geometric, kinematic and dynamic similarity criteria have been investigated to compare precisely model to nature. Although scaling is incomplete, it yields particularly informative orders of magnitude. With all these characteristics, MatIV appears as a very promising material to investigate experimentally a wide range of scientific questions dealing with relief dynamics and interactions between tectonics, erosion and sedimentation processes.
ISSN: 0040-1951

hal-00669904
https://hal.archives-ouvertes.fr/hal-00669904
DOI : 10.1016/j.tecto.2011.09.029

Éditeur(s) : HAL CCSD
Résumé : International audience
In orogens, shortening is mainly accommodated by thrusts, which constitute preferential zones for fluid–rock interactions. Fluid flow, mass transfer, and mineralogical reactions taking place along thrusts have been intensely investigated, especially in sedimentary basins for petroleum and uranium research. This study combines petrological investigations, mineralogical quantifications, and geochemical characterizations with a wide range of analytical tools with the aim of defining the fluid properties (nature, origin, temperature, and redox) and fluid–host rock interactions (mass transfers, recrystallization mechanisms, and newly formed synkinematic mineralization) in the Pic-de-Port-Vieux thrust fault zone (Pyrenees, Spain). We demonstrate that two geochemically contrasted rocks have been transformed by fluid flow under low-grade metamorphism conditions during thrusting. The hanging-wall Triassic red pelite was locally bleached, while the footwall Cretaceous dolomitic limestone was mylonitized. The results suggest that thrusting was accompanied by a dynamic calcite recrystallization in the dolomitic limestone as well as by leaching of iron via destabilization of iron oxides and phyllosilicate crystallization in the pelite. Geochemical and physical changes highlighted in this study have strong implications on the understanding of the thrust behavior (tectonic and hydraulic), and improve our knowledge of fluid–rock interactions in open fluid systems in the crust.
Contributions to Mineralogy and Petrology

hal-01575548
https://hal-univ-fcomte.archives-ouvertes.fr/hal-01575548
DOI : 10.1007/s00410-017-1394-5

Éditeur(s) : HAL CCSD
Résumé : International audience
This paper presents the background for the calculation of anisotropic piezoelectric properties of single crystals and the graphical display of the results in two or three dimensions, and the calculation of the aggregate properties from constituent crystals and the texture of the aggregate in a coherent manner. The texture data can be obtained from a wide range of sources, including pole figure diffraction and single orientation measurements (electron backscattered diffraction, electron channelling pattern, Laue Pattern, optical microscope universal-stage). We consider the elastic wave propagation in piezoelectric crystals as an example of the interaction of electrical (2nd rank tensor), piezoelectric (3rd rank tensor) and elastic properties (4th rank tensor). In particular, we give explicit formulae for the calculation of the Voigt averaged tensor from individual orientations or from an orientation distribution function. For the latter we consider numerical integration and an approach based on the expansion into spherical harmonics. We illustrate the methods using single crystals, polycrystalline quartz measured using electron channelling patterns and ideal Curie limiting groups applied to quartz aggregates. This paper also serves as a reference paper for the mathematical tensor capabilities of the texture analysis software MTEX
Geological Society Special Publication, 409

hal-01277789
https://hal.archives-ouvertes.fr/hal-01277789
DOI : 10.1144/SP409.2

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
During the early years of the Iceland Deep Drilling Project (IDDP), development of three distinctive technological and scientific approaches were formalised and then carried out until 2010 within a European funded project called HiTI (high temperature instruments for supercritical geothermal reservoir characterisation and exploitation). These approaches were: (1) development of several downhole instruments allowing them to function up to 300 ◦C and 400 ◦C, (2) identification of two new Na/Li cation ratio geothermometric relationships valid at very high temperature, (3) tracer testing with high temperature tolerant organic isomers and finally and (4) basalt rock deformation and petrophysical properties laboratory investigations at high temperature and pressure conditions.
ISSN: 0375-6505

hal-00921127
https://hal-brgm.archives-ouvertes.fr/hal-00921127
DOI : 10.1016/j.geothermics.2013.07.008

Éditeur(s) : HAL CCSD American Physical Society
Résumé : International audience
This is the first of two papers investigating the mechanical response of cemented granular materials by means of contact dynamics simulations. In this paper, a two-dimensional polydisperse sample with high-void ratio is constructed and then sheared in a simple shear numerical device at different confinement levels. We study the macroscopic response of the material in terms of mean and deviatoric stresses and strains. We show that the introduction of a local force scale, i.e., the tensile strength of the cemented bonds, causes the material to behave in a rigid-plastic fashion, so that a yield surface can be easily determined. This yield surface has a concave-down shape in the mean: deviatoric stress plane and it approaches a straight line, i.e., a Coulomb strength envelope, in the limit of a very dense granular material. Beyond yielding, the cemented structure gradually degrades until the material eventually behaves as a cohesionless granular material. Strain localization is also investigated, showing that the strains concentrate in a shear band whose thickness increases with the confining stress. The void ratio inside the shear band at the steady state is shown to be a material property that depends only on contact parameters.
ISSN: 1539-3755

hal-00523453
https://hal.archives-ouvertes.fr/hal-00523453
DOI : 10.1103/PhysRevE.82.011303

Éditeur(s) : HAL CCSD
Résumé : The Restefond fault, located in the Late Eocene-Early Oligocene Alpine foreland basin, affects the well lithified and low porosity Grès d'Annot. The fault core zone is characterized by the occurrence of highly deformed sandstone lenses. Deformation inside the lenses corresponds to mm to sub-mm-spaced cleavage planes rich in phyllosilicates and up to cm-thick and dm-long quartz-calcite pure extensional veins. The cleavages are mostly composed of newly-formed synkinematic white mica and chlorite. By using thermodynamic thermometers based on the chemical composition of chlorite, a temperature of 200 ± 20 °C of fault activity was computed. This temperature shows that the Restefond fault was active at burial conditions comprised between 6.5 and 8 km, assuming a mean geothermal gradient between 25 and 30 °Ckm−1. The petrophysic properties of sandstones from the core zone and in the hanging and foot wall of the fault were determined on drilled plugs following three spacial directions. The permeability of the highly deformed sandstone from the core zone is about one order of magnitude higher than in the host rock. This increase in permeability occurs in the direction parallel to the S-C structures and is explained by the occurrence of well-connected micropores localized between platy phyllosilicates. This study shows that the fault petrophysic properties are mostly controlled by the precipitation of synkinematic phyllosilicates under deep burial conditions.
Swiss Journal of Geosciences

hal-00795551
https://hal.archives-ouvertes.fr/hal-00795551
DOI : 10.1007/s00015-012-0099-z

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Experimental modelling applied to the study of orogenic wedge dynamics has been a subject of fruitful research for more than 30 years, although the technique dates back as far as the early XIXth century. On one hand, several first order parameters controlling the structural evolution of mountain belts have been intensively investigated using the classic tectonic "sandbox" models. The main parameters are the properties of the basal décollement, the deforming material, the backstop, and fluxes, kinematics and surface processes. On the other hand, the morphological evolution of a mountain relief subjected to changing tectonic or climatic forcing has been addressed using another kind of approach called "geomorphic" models. Nowadays, the literature is extremely rich, particularly for the sandbox technique, so that it becomes difficult to have an exhaustive view of the effects of the above parameters on mountain evolution. In this article, we propose a detailed review of the main results obtained using both "tectonic" and "geomorphic" approaches. Our goal is to provide an almost complete state-of-the-art in the experimental study of relief dynamics to guide present and future researchers in their understanding of mountain belt evolution.
ISSN: 0040-1951

hal-00757713
https://hal.archives-ouvertes.fr/hal-00757713
DOI : 10.1016/j.tecto.2012.01.027

Éditeur(s) : HAL CCSD American Geophysical Union (AGU)
Résumé : International audience
The lateral variation of the mechanical properties of continental lithosphere is an important factor controlling the localization of deformation and thus the deformation history and geometry of intraplate mountain belts. A series of three-layer lithospheric-scale analog models, with a strong domain (SD) embedded at various depths, are presented to investigate the development of topography and deformation patterns by having lateral heterogeneities within a weak continental lithosphere. The experiments, performed at a constant velocity and under normal gravity, indicate that the presence or absence of the SD controls whether deformation is localized or distributed at a lithospheric scale. Deformation and topography localize above the edges of the SD, while the SD region itself is characterized by minor amounts of surficial deformation and topography. The depth of the SD (within the ductile crust, ductile mantle lithosphere, or both) controls the pattern of deformation and thus the topography. The presence of a SD in the ductile crust or in the mantle results in limited surficial topographic effects but large variations in the Moho topography. Strong Moho deflection occurs when the SD is in the ductile crust, while the Moho remains almost flat when the SD is in the mantle. When the SD occupies the ductile lithosphere, the SD is tilted. These analog experiments provide insights into intraplate strain localization and could in particular explain the topography around the Tarim Basin, a lithospheric-scale heterogeneity north of the India-Asia collision zone.
ISSN: 0278-7407

hal-01172472
https://hal.archives-ouvertes.fr/hal-01172472
DOI : 10.1002/2014TC003756

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Properties of composite materials depend on interatomic phenomena occurring between binder crystals. Experimental information of Atomic Force Microscopy (A.F.M.) is of prime importance; however understanding is helped by molecular modeling. As underlined in Section 1, the present study is able to simulate crystal interfaces in presence of a solution within apertures less than 1 Nanometer at a full atomic scale. Section 2 presents the case study of a gypsum solution between (120) gypsum faces, with related boundary conditions and atomic interactions. Section 3 deals with the mass equilibrium of the solution within interfaces <5 angstrom, using the original Semi Analytical Stochastic Perturbations (SASP) approach. This information becomes in Section 4 the key for explaining the peak of adhesion obtained in A.F.M. around an aperture of 3 A and gives enlightenments on gypsum cohesion. In conclusion, this illustration shows the potentialities of full atomic modeling which could not be attained by any numerical approach at a mesoscopic scale.
ISSN: 0008-8846

hal-00411868
https://hal.archives-ouvertes.fr/hal-00411868
DOI : 10.1016/j.cemconres.2007.09.022

Éditeur(s) : HAL CCSD Springer Verlag
Résumé : In this paper, we investigate the impact of ambient temperature changes on the gravity reading of spring-based relative gravimeters. Controlled heating experiments using two Scintrex CG5 gravimeters allowed us to determine a linear correlation (R2> 0.9) between ambient temperature and gravity variations. The relation is stable and constant for the two CG5 we used: −5 nm/s2/∘C. A linear relation is also seen between gravity and residual sensor temperature variations (R2> 0.75), but contrary to ambient temperature, this relation is neither constant over time nor similar between the two instruments. The linear correction of ambient temperature on the controlled heating time series reduced the standard deviation at least by a factor of 2, to less than 10 nm/s2. The laboratory results allowed for reprocessing the data gathered on a field survey that originally aimed to characterize local hydrological heterogeneities on a karstic area. The correction of two years of monthly CG5 measurements from ambient temperature variations halved the standard deviation (from 62 to 32 nm/s2) and led us to a better hydrological interpretation. Although the origin of this effect is uncertain, we suggest that an imperfect control of the sensor temperature may be involved, as well as a change of the properties of an electronic component.
ISSN: 0949-7714

hal-01526952
https://hal.archives-ouvertes.fr/hal-01526952
DOI : 10.1007/s00190-016-0961-2

Éditeur(s) : HAL CCSD American Institute of Mathematical Sciences
Résumé : International audience
In this paper, shape optimization tools are applied to coastal engineering. A barred beach protection study is described, using a new type of water wave attenuator device, namely geotextile tube, to reduce the mobilization of sediments. A global optimization algorithm, able to pursue beyond local minima, is used to search for the optimum properties of the geotextile tube. The optimal configuration is then post-validated for generated currents.
ISSN: 1531-3492

hal-00475636
https://hal.archives-ouvertes.fr/hal-00475636
DOI : 10.3934/dcdsb.2010.13.759

Résumé : Dans cette étude, nous nous sommes intéressés aux propriétés physiques et chimiques de six accessions de Mammea americana afin de pouvoir identifier les accessions les plus prometteuses pour la vente en frais ou la transformation. Nous avons également cherché à évaluer l’activité antioxydante de la pulpe, identifier et quantifier ses composés phénoliques et optimiser leur extraction à l’aide de la technique assistée par ultrasons.Nos résultats montrent que les accessions étudiées présentent des caractéristiques physiques, physico-chimiques et fonctionnelles significativement différentes. Pavé 11, Lézarde et Ti Jacques sont intéressants pour la vente en frais, en raison de leurs fruits sucrés avec une teneur élevée en caroténoïdes et composés phénoliques totaux. Sonson, Pavé 11 et Lézarde présentent une adaptabilité à la transformation. La composition polyphénolique de la pulpe déterminée par HPLC-DAD et UPLC-MS, a mis en évidence la présence d’acides phénoliques, de tanins condensés, de flavonols et flavanols dans nos échantillons. D’autre part, les tests d’activité antioxydante (DPPH et ORAC) révèlent que Ti jacques est l’extrait le plus actif. Un plan d’expérimentation a été mis en œuvre afin d’optimiser l’extraction des polyphénols à l’aide d’une technique d’extraction assistée par ultrasons. Les résultats montrent que l’extrait obtenu est riche en polyphénols et contient les mêmes teneurs en acides phénoliques et flavonols comparé à celui obtenu par la méthode conventionnelle. De plus, l’extrait obtenu à l’aide d’un solvant « vert » possède de bonnes propriétés organoleptiques.
Our work focuses on the physical and chemical properties of six mamey apple cultivars in order to select elite cultivars suitable for food processing or as table fruit. The antioxidant activity of the fruit pulp, the identification and quantification of the polyphenols responsible for it, and ultrasound assisted extraction method were also investigated.According to our results, the postharvest routes for every cultivar could be different. Pavé 11, Lézarde and Ti Jacques were found to be good for consumption, giving sweeter fruits with high total phenolic and carotenoid contents. Sonson, pavé 11 and Lézarde had suitable characteristics for the manufacturing of mamey products. The polyphenolic composition of the pulp determined by HPLC-DAD and UPLC-MS showed the presence of phenolic acids, condensed tannins, flavonols and flavanols. The results of the antioxidant test (DPPH and ORAC) point out that the most antioxidant cultivar was Ti Jacques. The design and optimization of the ultrasound assisted extraction method has done for polyphenols extraction. The results showed that the polyphenols rich extract contains the same content of phenolic acids and flavonols in comparison to the conventional method. Additionally, the dry extract obtained with a “green” solvent, had good organoleptic properties.

http://www.theses.fr/2014AGUY0702/document

Éditeur(s) : HAL CCSD European Geosciences Union
Résumé : International audience
We calculated the seismic properties of 47 mantle xenoliths from 9 kimberlitic pipes in the Kaapvaal craton based on their modal composition, the crystal-preferred orientations (CPO) of olivine, ortho- and clinopyroxene, and garnet, the Fe content of olivine, and the pressures and temperatures at which the rocks were equilibrated. These data allow constraining the variation of seismic anisotropy and velocities within the cratonic mantle. The fastest P and S2 wave propagation directions and the polarization of fast split shear waves (S1) are always subparallel to olivine [100] axes of maximum concentration, which marks the lineation (fossil flow direction). Seismic anisotropy is higher for high olivine contents and stronger CPO. Maximum P wave azimuthal anisotropy (AVp) ranges between 2.5 and 10.2% and the maximum S wave polarization anisotropy (AVs), between 2.7 and 8%. Changes in olivine CPO symmetry result in minor variations in the seismic anisotropy patterns, mainly in the apparent isotropy directions for shear wave splitting. Seismic properties averaged over 20 km-thick depth sections are, therefore, very homogeneous. Based on these data, we predict the anisotropy that would be measured by SKS, Rayleigh (SV) and Love (SH) waves for five endmember orientations of the foliation and lineation. Comparison to seismic anisotropy data from the Kaapvaal shows that the coherent fast directions, but low delay times imaged by SKS studies, and the low azimuthal anisotropy with with the horizontally polarized S waves (SH) faster than the vertically polarized S wave (SV) measured using surface waves are best explained by homogeneously dipping (45°) foliations and lineations in the cratonic mantle lithosphere. Laterally or vertically varying foliation and lineation orientations with a dominantly NW-SE trend might also explain the low measured anisotropies, but this model should also result in backazimuthal variability of the SKS splitting data, not reported in the seismological data. The strong compositional heterogeneity of the Kaapvaal peridotite xenoliths results in up to 3% variation in density and in up to 2.3% variation of Vp, Vs, and Vp / Vs ratio. Fe depletion by melt extraction increases Vp and Vs, but decreases the Vp / Vs ratio and density. Orthopyroxene enrichment due to metasomatism decreases the density and Vp, strongly reducing the Vp / Vs ratio. Garnet enrichment, which was also attributed to metasomatism, increases the density, and in a lesser extent Vp and the Vp / Vs ratio. Comparison of density and seismic velocity profiles calculated using the xenoliths' compositions and equilibration conditions to seismological data in the Kaapvaal highlights that (i) the thickness of the craton is underestimated in some seismic studies and reaches at least 180 km, (ii) the deep sheared peridotites represent very local modifications caused and oversampled by kimberlites, and (iii) seismological models probably underestimate the compositional heterogeneity in the Kaapvaal mantle root, which occurs at a scale much smaller than the one that may be sampled seismologically.
ISSN: 1869-9510

hal-01053516
https://hal.archives-ouvertes.fr/hal-01053516
DOI : 10.5194/se-5-45-2014

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Wind energy production is very sensitive to turbulent wind speed. Thus rapid variation of wind speed due to changes in the local meteorological conditions can lead to electrical power variations of the order of the nominal power output, in particular when wind power variations on very short time scales, range at few seconds to 1 h, are considered. In small grid as they exist on islands (Guadeloupean Archipelago: French West Indies) such fluctuations can cause instabilities in case of intermediate power shortages. The developed analysis in [14] reveals three main classes of time series for the wind speed fluctuations. In this work, Probability Density Functions (PDFs) are proposed to fit the wind speed fluctuations distributions in each class. After, to simulate wind speed fluctuations sequences, we use a stochastic differential equation, the Langevin equation considering Gaussian turbulence PDF (class I), Gram–Charlier PDF (class II) and a mixture of gaussian PDF (class III). The statistical and dynamical properties of simulated wind sequences are close to those of measured wind sequences, for each class
ISSN: 0306-2619

hal-01527885
https://hal.archives-ouvertes.fr/hal-01527885
DOI : 10.1016/j.apenergy.2012.05.007

Éditeur(s) : HAL CCSD ACS American Chemical Society - Publications
Résumé : International audience
ABSTRACT: In this paper, the structural, optical and thermal properties of n-type (100),p-type (100) and (111) mesoporous silicon (MePSi) are reported. The mesoporous silicon wasprepared by an electrochemical process from bulk silicon wafer. Depending on the etchingdepth, analyses show that the porosity of p-type (111) increased by 32 to 40% compared to p(100) which, in turn, increased by 22 to 48% compared to n-type (100). The structuremorphology and the abundance of Si-Ox and Si-Hy also depended heavily on the type andcrystal orientation of MePSi. The thermal properties of the MePSi layers such as thermalconductivity (κ), volumetric heat capacity (ρCp) and thermal contact resistance (Rth) weredetermined using the pulsed photothermal method. The thermal conductivity of bulk silicondropped sharply after etching, decreasing by more than twenty-fold in the case of n-type (100)and by over forty-five fold for p-type (100) and (111). According to the percolation modeldepending on both porosity and phonon confinement, the drop in thermal conductivity wasmainly due to the nanostructure formation after etching. Thermal investigations showed thatthe volumetric heat capacity (ρCp) followed the barycentric model which depends mainly onthe porosity. The thermal contact resistances of MePSi layers were estimated to be in therange of 1x10-8 to 1x10-7 K⋅m2⋅W-1.
The Journal of Physical Chemistry C

hal-01495490
https://hal.archives-ouvertes.fr/hal-01495490
DOI : 10.1021/acs.jpcc.6b13101

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Increasingly, health risk assessment is addressing multiple pathway exposures to multiple contaminants. We reviewed aggregated exposure and cumulative risk approaches for contemporary and ubiquitous semivolatile organic compounds (SVOC). We identified 22 studies aggregating exposure pathways, and 31 cumulating risk. Exposure aggregation is based on the addition of pathway-specific doses, using kinetic modeling where it exists, and classic external dose equations otherwise. In most cases, exposure is dominated by a single route or source of exposure - mainly the oral pathway - via dietary or non-dietary exposure. Preferential routes and sources of exposure are influenced by SVOC physical-chemical properties such as vapor pressure. The cumulative risk approach for contaminants is based on dose addition. Simple sum of hazard quotient (Hazard Index: HI) is the most commonly used cumulative risk assessment approach, while Relative Potency Factor (RPF) appeared to the best suited – although this calls for a level of toxicological information that limits the number of compounds that can be studied simultaneously. Where both were performed, moving from HI to more refined approach produced similar results. In conclusion, both approaches - exposure aggregation and cumulative risk - rely on simple assumptions. Nevertheless, they allow uncertainty to be reduced, in comparison with source-by-source or chemical-by-chemical approaches.
ISSN: 0013-9351

hal-01635759
https://hal.archives-ouvertes.fr/hal-01635759
https://hal.archives-ouvertes.fr/hal-01635759/document
https://hal.archives-ouvertes.fr/hal-01635759/file/Pelletier%202017%20Review%20%20rev2.pdf
DOI : 10.1016/j.envres.2017.06.022

Éditeur(s) : HAL CCSD Elsevier
Résumé : To contribute to the understanding of how opening-mode fractures (joints) form and open or close at depth in layered rocks, we present a 2D numerical study aiming to determine whether tensile stress can develop in pre-fractured elastic multilayers submitted to biaxial compressive strain conditions. First, we investigate the role of the elastic and geometrical properties of the layers on the development of tensile stress in models with five bonded layers and containing one open fracture in the central layer. Our results indicate that, in absence of elastic contrast (in Young's modulus) between the layers, no tensile stress develops in the models. However, when the fractured layer is stiffer than the two adjacent layers directly above and below, a lobe of horizontal tensile stress develops centered on the pre-existing fracture. The creation of this tensile stress is contingent upon the partial closing of the fracture. The levels of tensile stress and the thickness of the lobe of tensile stress increase logarithmically with an increase in the elastic contrast and are systematically larger for a larger Soft/Stiff ratio (ratio of the total thickness of the soft layers with the total thickness of the stiff layers). Second, we investigate the role of fracture interaction in the development of tensile stress in models containing a pair of open fractures. We observe that the levels of tensile stress in the region between the fractures are systematically higher than those observed in identical models containing a single fracture. This increase in tensile stress is very large for small elastic contrasts between the layers but diminishes when the elastic contrast increases. Furthermore, the spacing between the pre-existing fractures plays an important role in the stress distribution in the region between them. When the fracture spacing is equal to or lower than 1.15 times the height of the fractured layer for the experimental conditions chosen, the lobes of tensile stress centered on the fractures coalesce. This results in the formation of vast areas of tensile stress in models under remote compressive loading conditions. Such tensile areas are likely to allow the initiation and propagation of subsequent opening-mode fractures. The results obtained provide new insights into the formation of joints in layered rocks in compressive environments, with important consequences on fluid flow.
ISSN: 0040-1951

hal-00407576
https://hal.archives-ouvertes.fr/hal-00407576
DOI : 10.1016/j.tecto.2006.12.003