Éditeur(s) : HAL CCSD American Geophysical Union (AGU) AGU and the Geochemical Society
Résumé : International audience
To study how an impacting plume modifies the mantle lithosphere, we analyzed the microstructures and crystal preferred orientations (CPO) of 29 peridotites and 37 pyroxenites that sample the mantle root of the Ontong Java Plateau (OJP) from 60 to 120 km depth. The peridotites show a strong compositional variability, but homogeneous coarse granular to tabular microstructures, except for those equilibrated at the shallowest and deepest depths, which are porphyroclastic. All peridotites have clear olivine CPO, with dominant fiber-[010] patterns. Low intragranular misorientations and straight grain boundaries in olivine suggest that, above 100 km depth, annealing often followed deformation. Calculated density and P wave velocities of the peridotites decrease weakly with depth. S wave velocities decrease faster, resulting in increasing Vp/Vs ratio with depth. Calculated densities and seismic velocity profiles are consistent with those estimated for normal mantle compositions under a cold oceanic geotherm. Enrichment in pyroxenites may further increase seismic velocities. The calculated seismic properties cannot therefore explain the low S waves velocities predicted by Rayleigh wave tomography and ScS data in the mantle beneath the OJP. Calculated P and S waves anisotropy is variable (2–12%). It is higher on average in the deeper section of the lithosphere. Because olivine has dominantly [010]-fiber CPO patterns, if foliations are horizontal, vertically propagating S waves and Rayleigh waves will sample very weak anisotropy in the OJP mantle lithosphere. Moreover, if the orientation of the lineation changes with depth, the anisotropy-induced contrast in seismic properties might produce an intralithospheric reflector marking the stratification of the OJP mantle root.
ISSN: 1525-2027

hal-01116428
https://hal.archives-ouvertes.fr/hal-01116428
DOI : 10.1002/2014GC005452

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
In Western Mediterranean, the Rif belt in Morocco is part of the Gibraltar Arc built during the Tertiary in the framework of Eurasia-Africa convergence. The structural and metamorphic evolution of the internal units of this belt as well as their timing, crucial to constrain the geodynamic evolution of the Alboran Sea, is still largely debated.Our study on the Ceuta Peninsula (Northern Rif) provides new structural, petrological and geochronological data (U-Th-Pb, Ar-Ar), which allow to precise the tectono-metamorphic evolution of the Lower Sebtides metamorphic units with:(1) a syn-metamorphic thrusting event developed under granulite facies conditions (7–10 kbar and 780–820 °C). A major thrust zone, the Ceuta Shear Zone, drove the emplacement of metapelites and peridotitic lenses from the Ceuta Upper Unit over the orthogneisses of the Monte Hacho Lower Unit. This compressional event ended during the Upper Oligocene.(2) an extensional event developed at the boundary between amphibolite and greenschist facies conditions (400–550 °C and 1–3 kbar). During this event, the Ceuta Shear Zone has been reactivated as a normal fault. Normal ductile shear zones contributed to the final exhumation of the metamorphic units during the Early Miocene.We propose that the compressional event is related to the formation of an orogenic wedge located in the upper plate, in a backward position, of the subduction zone driving the geodynamic evolution of the Alboran domain. In this context, the episode of lithospheric thinning could be related to the opening of the Alboran basin in a back-arc position.Furthermore, unlike the previous models proposed for the Rif belt, the tectonic coupling between mantle peridotites and crustal metamorphic rocks occurred in Ceuta Peninsula at a depth of 20–30 km under high temperature conditions, before the extensional event, and thus cannot be related to the back-arc extension.
ISSN: 0040-1951

insu-01682810
https://hal-insu.archives-ouvertes.fr/insu-01682810
DOI : 10.1016/j.tecto.2017.11.028

Éditeur(s) : HAL CCSD American Geophysical Union (AGU)
Résumé : International audience
The Ama Drime range located at the transition between the high Himalayan range and south Tibet is a N-S active horst that offsets the South Tibetan Detachment System (STDS). Within the horst, a paragneissic unit, possibly attributed to the upper Himalayan crystalline series, overly the lower Himalayan crystalline series Ama Drime orthogneissic unit containing large metabasite layers and pods that have experienced pressure >= 1.4 GPa. Combining structural analysis with new and published pressure-temperature (P-T) estimates as well as U-Th/Pb, Ar-39/Ar-40 and (U-Th)/He ages, the P-T-deformation-time (P-T-D-t) paths of the main units within and on both sides of the horst are reconstructed. They imply that N-S normal faults initiated prior to 11 Ma and have accounted for a total exhumation <= 0.6 GPa (22 km) that probably occurred in two phases: the first one until similar to 9 Ma and the second one since 6 to 4 Ma at a rate of similar to 1 mm/yr. In the Ama Drime unit, 1 to 1.3 GPa (37 to 48 km) of exhumation occurred after partial melting since similar to 30 Ma until similar to 13 Ma, above the Main Central Trust (MCT) and below the STDS when these two fault systems were active together. The switch from E-W (STDS) to N-S (Ama Drime horst) normal faulting between 13 and 12 Ma occurs at the time of propagation of thrusting from the MCT to the Main Boundary Thrust. These data are in favor of a wedge extrusion or thrust system rather than a crustal flow model for the building of the Himalaya. We propose that the kinematics of south Tibet Cenozoic extension phases is fundamentally driven by the direction and rate of India underthrusting.
ISSN: 0278-7407

hal-00486405
https://hal.archives-ouvertes.fr/hal-00486405
DOI : 10.1029/2009TC002551

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
Detection and attribution of human influence on sea level rise are important topics that have not yet been explored in depth. We question whether the sea level changes (SLC) over the past century were natural in origin. SLC exhibit power law long-term correlations. By estimating Hurst exponent through Detrended Fluctuation Analysis and by applying statistics of Lennartz and Bunde [2009], we search the lower bounds of statistically significant external sea level trends in longest tidal records worldwide. We provide statistical evidences that the observed SLC, at global and regional scales, is beyond its natural internal variability. The minimum anthropogenic sea level trend (MASLT) contributes to the observed sea level rise more than 50% in New York, Baltimore, San Diego, Marseille, and Mumbai. A MASLT is about 1 mm/yr in global sea level reconstructions that is more than half of the total observed sea level trend during the XXth century.
ISSN: 0094-8276

hal-01336190
https://hal.archives-ouvertes.fr/hal-01336190
https://hal.archives-ouvertes.fr/hal-01336190/document
https://hal.archives-ouvertes.fr/hal-01336190/file/BECKER2014a.pdf
DOI : 10.1002/2014GL061027

Éditeur(s) : HAL CCSD Blackwell Publishing
Résumé : International audience
Pliocene and Pleistocene deposits from Grande-Terre (Guadeloupe archipelago, French Lesser Antilles) provide a remarkable example of an isolated carbonate system built in an active margin setting, with sedimentation both controlled by rapid sea-level changes and tectonic movements. Based on new field, sedimentological and palaeontological analyses, these deposits have been organized into four sedimentary sequences (S1 to S4) separated by three subaerial erosion surfaces (SB0, SB1 and SB2). Sequences S1 and S2 ('Calcaires inférieurs à rhodolithes') deposited during the late Zanclean to early Gelasian (planktonic foraminiferal Zones PL2 to PL5) in low subsidence conditions, on a distally steepened ramp dipping eastward. Red algal-rich deposits, which dominate the western part of Grande-Terre, change to planktonic foraminifer-rich deposits eastward. Vertical movements of tens of metres were responsible for the formation of SB0 and SB1. Sequence S3 ('Formation volcano-sédimentaire', 'Calcaires supérieurs à rhodolithes' and 'Calcaires à Agaricia') was deposited during the late Piacenzian to early Calabrian (Zones PL5 to PT1a) on a distally steepened, red algal-dominated ramp that changes upward into a homoclinal, coral-dominated ramp. Deposition of Sequence S3 occurred during a eustatic cycle in quiet tectonic conditions. Its uppermost boundary, the major erosion surface SB2, is related to the Cala1 eustatic sea-level fall. Finally, Sequence S4 ('Calcaires à Acropora') probably formed during the Calabrian, developing as a coral-dominated platform during a eustatic cycle in quiet tectonic conditions. The final emergence of the island could then have occurred in late Calabrian times.
ISSN: 1469-3496

hal-00760906
https://hal.archives-ouvertes.fr/hal-00760906
DOI : 10.1111/j.1365-3091.2011.01311.x

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The analysis of 2D deep-seismic-reflection profiles across the slope and abyssal plain of the Angola oceanic basin reveals the existence of a significant and formerly unknown depocentre beneath the giant Cenozoic Congo deep-sea fan, between 7000 m and 9000 m depth, deposited directly onto the Aptian oceanic crust. The unit, which is up to 2.5 km thick and extends for more than 200 km basinwards of the Continent-Ocean boundary, is probably aged Albian-Turonian. Its radial fan-shaped depocentre is centred on the present-day Congo River outlet and contains at least 0.2 Mio km(3) of sediments. These observations and the results from flexural modelling indicate that (1) the location of the Congo River's outlet has remained fairly stable since the Late Cretaceous, and (2) the basal unit was indeed sourced by a palaeo-Congo River probably located nearby the present-day one. Thus, the Atlantic sedimentary system related to the exoreism of the Congo River is much older than previously thought. Thermal modelling indicates that the maturation history of this upper-Cretaceous deposits is highly influenced by the interaction between the initial high heat flow of the young oceanic crust and further increase in sediment supply due to the progradation of the overlying Tertiary deep-sea fan during the Miocene. Hence, despite low present-day heat-flow values, should the unit have source rock potential, its basal section may be currently generating hydrocarbons.;All in all, the results from our models also suggest that the interplay between an initially high heat flow and the further high sediment supply in areas of major river input, may be a key factor for the thermal maturation of potential source rocks deposited onto a present-day "cold" oceanic crust.
ISSN: 0264-8172

hal-00475541
https://hal.archives-ouvertes.fr/hal-00475541
DOI : 10.1016/j.marpetgeo.2009.08.015

Éditeur(s) : American Geophysical Union
Résumé : We use seismic reflection and rock sample data to propose that the first-order physiography of New Caledonia Trough and Norfolk Ridge formed in Eocene and Oligocene time and was associated with the onset of subduction and back-arc spreading at the Australia-Pacific plate boundary. Our tectonic model involves an initial Cretaceous rift that is strongly modified by Cenozoic subduction initiation. Hence, we are able to explain (1) complex sedimentary basins of inferred Mesozoic age; (2) a prominent unconformity and onlap surface of middle Eocene to early Miocene age at the base of flat-lying sediments beneath the axis of New Caledonia Trough; (3) gently dipping, variable thickness, and locally deformed Late Cretaceous strata along the margins of the trough; (4) platform morphology and unconformities on either side of the trough that indicate a phase of late Eocene to early Miocene uplift to near sea level, followed by rapid Oligocene and Miocene subsidence of similar to 1100-1800 m; and (5) seismic reflection facies tied to boreholes that suggest absolute tectonic subsidence at the southern end of New Caledonia Trough by 1800-2200 m since Eocene time. The Cenozoic part of the model involves delamination and subduction initiation followed by rapid foundering and rollback of the slab. This created a deep (>2 km) enclosed oceanic trough, similar to 2000 km long and 200-300 km across, in Eocene and Oligocene time as the lower crust detached, with simultaneous uplift and local land development along basin flanks. Disruption of Late Cretaceous and Paleogene strata was minimal during this Cenozoic phase and involved only subtle tilting and local reverse faulting or folding. Basin formation was possible through the action of at least one detachment fault that allowed the lower crust to either be subducted into the mantle or exhumed eastward into Norfolk Basin. We suggest that delamination of the lithosphere, with possible mixing of the lower crust back into the mantle, is more widespread than previously thought and may be commonly associated with subduction initiation, such as Cenozoic events in the Mediterranean and western Pacific.
Tectonics (0278-7407) (American Geophysical Union), 2010-03 , Vol. 29 , N. TC2004 , P. 1-16

Droits : Copyright 2010 by the American Geophysical Union.
http://archimer.ifremer.fr/doc/00001/11271/9283.pdf
DOI:10.1029/2009TC002476
http://archimer.ifremer.fr/doc/00001/11271/

Éditeur(s) : Copernicus Gesellschaft Mbh
Résumé : Boundary Exchange (BE - exchange of elements between continental margins and the open ocean) has been emphasized as a key process in the oceanic cycle of neodymium (Nd) (Lacan and Jeandel, 2005a). Here, we use a regional eddy-permitting resolution Ocean General Circulation Model (1/4A degrees) of the North Atlantic basin to simulate the distribution of the Nd isotopic composition, considering BE as the only source. Results show good agreement with the data, confirming previous results obtained using the same parameterization of the source in a coarse resolution global model (Arsouze et al., 2007), and therefore the major control played by the BE processes in the Nd cycle on the regional scale. We quantified the exchange rate of the BE, and found that the time needed for the continental margins to significantly imprint the chemical composition of the surrounding seawater (further referred as characteristic exchange time) is of the order of 0.2 years. However, the timescale of the BE may be subject to large variations as a very short exchange time (a few days) is needed to reproduce the highly negative values of surface waters in the Labrador Sea, whereas a longer one (up to 0.5 years) is required to simulate the radiogenic influence of basaltic margins and distinguish the negative isotopic signatures of North Atlantic Deep Water from the more radiogenic southern origin water masses. This likely represents geographical variations in erosion fluxes and the subsequent particle load onto the continental margins. Although the parameterization of the BE is the same in both configurations of the model, the characteristic exchange time in the eddy-permitting configuration is significantly lower than the previous evaluations using a low resolution configuration (6 months to 10 years), but however in agreement with the available seawater Nd isotope data. This results highlights the importance of the model dynamics in simulating the BE process.
Ocean Science (1812-0784) (Copernicus Gesellschaft Mbh), 2010 , Vol. 6 , N. 3 , P. 789-797

Droits : Author(s) 2010. This work is distributed, EGU
http://archimer.ifremer.fr/doc/00013/12412/9201.pdf
DOI:10.5194/os-6-789-2010
http://archimer.ifremer.fr/doc/00013/12412/

Éditeur(s) : HAL CCSD Wiley
Résumé : International audience
Well-designed and effectively managed networks of marine reserves can be effective tools for both fisheries management and biodiversity conservation. Connectivity, the demographic linking of local populations through the dispersal of individuals as larvae, juveniles or adults, is a key ecological factor to consider in marine reserve design, since it has important implications for the persistence of metapopulations and their recovery from disturbance. For marine reserves to protect biodiversity and enhance populations of species in fished areas, they must be able to sustain focal species (particularly fishery species) within their boundaries, and be spaced such that they can function as mutually replenishing networks whilst providing recruitment subsidies to fished areas. Thus the configuration (size, spacing and location) of individual reserves within a network should be informed by larval dispersal and movement patterns of the species for which protection is required. In the past, empirical data regarding larval dispersal and movement patterns of adults and juveniles of many tropical marine species have been unavailable or inaccessible to practitioners responsible for marine reserve design. Recent empirical studies using new technologies have also provided fresh insights into movement patterns of many species and redefined our understanding of connectivity among populations through larval dispersal. Our review of movement patterns of 34 families (210 species) of coral reef fishes demonstrates that movement patterns (home ranges, ontogenetic shifts and spawning migrations) vary among and within species, and are influenced by a range of factors (e.g. size, sex, behaviour, density, habitat characteristics, season, tide and time of day). Some species move <0.1–0.5 km (e.g. damselfishes, butterflyfishes and angelfishes), <0.5–3 km (e.g. most parrotfishes, goatfishes and surgeonfishes) or 3–10 km (e.g. large parrotfishes and wrasses), while others move tens to hundreds (e.g. some groupers, emperors, snappers and jacks) or thousands of kilometres (e.g. some sharks and tuna). Larval dispersal distances tend to be <5–15 km, and self-recruitment is common. Synthesising this information allows us, for the first time, to provide species, specific advice on the size, spacing and location of marine reserves in tropical marine ecosystems to maximise benefits for conservation and fisheries management for a range of taxa. We recommend that: (i) marine reserves should be more than twice the size of the home range of focal species (in all directions), thus marine reserves of various sizes will be required depending on which species require protection, how far they move, and if other effective protection is in place outside reserves; (ii) reserve spacing should be <15 km, with smaller reserves spaced more closely; and (iii) marine reserves should include habitats that are critical to the life history of focal species (e.g. home ranges, nursery grounds, migration corridors and spawning aggregations), and be located to accommodate movement patterns among these. We also provide practical advice for practitioners on how to use this information to design, evaluate and monitor the effectiveness of marine reserve networks within broader ecological, socioeconomic and management contexts.
ISSN: 1464-7931

Droits : http://creativecommons.org/licenses/by-nc-nd/
hal-01334353
https://hal-univ-perp.archives-ouvertes.fr/hal-01334353
https://hal-univ-perp.archives-ouvertes.fr/hal-01334353/document
https://hal-univ-perp.archives-ouvertes.fr/hal-01334353/file/Green_et_al-2015-Biological_Reviews.pdf
DOI : 10.1111/brv.12155

Éditeur(s) : HAL CCSD Nature Publishing Group
Résumé : International audience
Temperature and fluid pressure conditions control rock deformation and mineralization on geological faults, and hence the distribution of earthquakes1. Typical intraplate continental crust has hydrostatic fluid pressure and a near-surface thermal gradient of 31 ± 15 degrees Celsius per kilometre2, 3. At temperatures above 300–450 degrees Celsius, usually found at depths greater than 10–15 kilometres, the intra-crystalline plasticity of quartz and feldspar relieves stress by aseismic creep and earthquakes are infrequent. Hydrothermal conditions control the stability of mineral phases and hence frictional–mechanical processes associated with earthquake rupture cycles, but there are few temperature and fluid pressure data from active plate-bounding faults. Here we report results from a borehole drilled into the upper part of the Alpine Fault, which is late in its cycle of stress accumulation and expected to rupture in a magnitude 8 earthquake in the coming decades4, 5. The borehole (depth 893 metres) revealed a pore fluid pressure gradient exceeding 9 ± 1 per cent above hydrostatic levels and an average geothermal gradient of 125 ± 55 degrees Celsius per kilometre within the hanging wall of the fault. These extreme hydrothermal conditions result from rapid fault movement, which transports rock and heat from depth, and topographically driven fluid movement that concentrates heat into valleys. Shear heating may occur within the fault but is not required to explain our observations. Our data and models show that highly anomalous fluid pressure and temperature gradients in the upper part of the seismogenic zone can be created by positive feedbacks between processes of fault slip, rock fracturing and alteration, and landscape development at plate-bounding faults.
ISSN: 0028-0836

hal-01685757
https://hal.archives-ouvertes.fr/hal-01685757
DOI : 10.1038/nature22355

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The formation age of the Siberian cratonic mantle is not well established as yet. Re–Os data on various mantle-derived materials have shown that it contains Archaean components, but the reported Re-depletion ages show a broad variation range (3.4 to 1 Ga) and are commonly ≤ 2 Ga for peridotite xenoliths. We report Hf and Nd isotope data for cpx and garnet separated from nine refractory spinel and garnet peridotite xenoliths from the Udachnaya kimberlite. The cpx from low-opx spinel harzburgites show extremely high εHf values, from + 607 to + 2084, which testify to long-term evolution of these rocks with high Lu/Hf ratios, consistent with their residual origin and near absence of post-melting enrichments in the Lu–Hf system. Such high εHf values are unusual for cpx from other cratonic peridotites and are higher than those reported for depleted cpx in off-cratonic peridotites. The clinopyroxenes from low-opx spinel harzburgites yield Hf model ages from 1.9 to 1.7 Ga while the cpx from high-opx spinel harzburgites yield Hf model ages from 3.0 to 1.9 Ga. When plotted together, they define a Lu/Hf isochron with an age of 1.80 Ga, which we consider as a robust estimate of the formation age (melt extraction event) because it is obtained on residual rocks that show no evidence for HREE and Hf enrichments and because the model ages for three out of four individual samples are similar to each other. The cpx have high εNd of + 94 to + 123, which are inconsistent with their low Sm/NdPM of < 1 and yield no meaningful age estimates. The consistently high, positive εNd in these cpxs can be interpreted in terms of long-term evolution of refractory peridotites with high Sm/Nd, followed by relatively recent LREE enrichments.We infer that a significant part of the lithospheric mantle in the central Siberian craton may have been formed during a major event (or a series of events) at around 1.8 Ga. Older ages reported for the central Siberian craton may refer to less common materials from cratonic or other domains formed in the Archaean that were later incorporated into the cratonic roots. The transition from the “Archaean” to “modern” tectonic regimes in Siberia and possibly elsewhere may have taken place at 1.8–1.9 Ga rather than at ~ 2.5 Ga, i.e. in the second half of the Paleoproterozoic rather than at the Archaean–Proterozoic boundary, at which time the asthenospheric mantle became generally too cold to experience high-degree melting on a large scale. The ~ 1.8 Ga formation age of the Siberian cratonic mantle is coeval with that for a major part of the ancient continental crust in the central Siberian craton. The temporal crust–mantle links may be explained either by the generation of the initial source materials for continental crust in the same melting event that formed the residual peridotites or, alternatively, by subduction and melting of pre-existing proto-lithosphere destabilized by a major mantle upwelling that formed the residual mantle.
ISSN: 0009-2541

hal-01115519
https://hal.archives-ouvertes.fr/hal-01115519
DOI : 10.1016/j.chemgeo.2014.10.018

Éditeur(s) : HAL CCSD
Résumé : International audience
The purpose of our study is to model a geothermal reservoir. When geothermal reservoir are assumed to be composed of pure water, the transfer of mass and energy is classically described by two balance equations: mass balance equation and the energy balance equation. In addition to those equations, fluid velocity ist classically given by the Darcy law while thermodynamic properties, inferred from theoretical or empirical equations of state, are used to close the mathematical system. Once this system is closed, there exist different solutions. The first one is to solve for pressure and temperature with a variable switch to saturation in the two-phase region (e.g. TOUGH2). The second one is to solve for pressure and enthalpy to increase stability of phase transition between single and two-phase states (e.g. Hydrotherm). We adopted the second option and chose te use a splitting method to get rid of the complexity of coupling equations and a finite volume method for the spatial discretization. Selecting object-oriented languages, we developed a multi-language framework, combining Python, Fortran and a C++ implementation of IAPWS (from the freesteam project) including the supercritical equations, in porous media velocity is given by Darcy law and to close the system physical properties are determined by the IAPWS-IF97 thermodynamic formulation. We resolve the equations in pressure and enthalpy instead of pressure and temperature in order to increase stability and to handle easier the passage from a single-phase to a two-phase system. We solve the system by using a splitting method - to get rid of the complexity of coupling equations - and a finite volume method. We offer some freedom to users thanks to the implementation of several methods like explicit or implicit Euler, Runge-Kutta or BDF2 for time solvers or GMRES and BICGSTAB for the linear solver. We can handle several boundary conditions like no-flow - describing a boundary which can not exchange matter with the exterior - or like a mixed-therm condition - a Dirichlet condition to the pressure and a Dirichlet or an outflow condition to the temperature in order to describe a recharge or a discharge zone - ... We're developing a multi-language framework, combining Python, Fortran and the C++ implementation of IAPWS (from the freesteam project). All these languages are object-oriented. We've applied this simulation model to the dogger in Paris, France, to several one-dimensional systems and a two-dimensional one made by Coumou with the CSMP++ platform. The dogger is a reservoir exploited to produce heat by pumping water at 70 and reinjecting it in the reservoir at 40. In the one-dimensional systems we wanted to observe the process of heat transfer from a higher temperature boundary to a smaller one in a high-energy domain. The last simulation shows the natural convection of water in a fault. For every simulation we compared the solutions we found with an other code (TOUGH2 or CSMP++) and they agreed. The next step will be to model the geothermal plant in Guadeloupe, West Indies. It's the only place in France - and in the West Indies so far - producing electricity with the earth power. The temperature can reach up to 1000 and the pressure range is around a few hundreds MPa. In some surface zones we can see two-phase water at atmospheric pressure. In the 1980s Bouillante was a laboratory for France. Since 1995 Bouillante has given 30GWh electricity a year to the Guadeloupeans.
PROCEEDINGS, Thirty-Ninth Workshop on Geothermal Reservoir Engineering
Stanford, United States

Droits : info:eu-repo/semantics/OpenAccess
hal-00944133
https://hal-brgm.archives-ouvertes.fr/hal-00944133
https://hal-brgm.archives-ouvertes.fr/hal-00944133/document
https://hal-brgm.archives-ouvertes.fr/hal-00944133/file/Copol.pdf

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The timing of E–W extension of the Tibetan plateau provides a test of mechanical models of the geodynamic evolution of the India–Asia convergence zone. In this work we focus on the Kung Co half graben (Southern Tibet, China), bounded by an active N–S normal fault with a minimum vertical offset of 1600 m. To estimate the onset of normal faulting we combined high and medium temperature (U–Pb, Ar/Ar) and low temperature ((U–Th)/He) thermochronometry of the Kung Co pluton, a two-mica granite of the northern Himalayan granitic belt that outcrop in the footwall of the fault. Biotite and muscovite Ar/Ar ages , are close from each other [not, vert, similar 16 Ma ± 0.2 (Ms) and not, vert, similar 15 ± 0.4 Ma (Bt)], which is typical of fast cooling. The zircon and apatite (U–Th)/He ages range from 11.3 to 9.6 Ma and 9.9 to 3.7 Ma respectively. These He ages are indicative of (1) fast initial cooling, from 11.3 to not, vert, similar 9 Ma, gradually decreasing with time and (2) a high geothermal gradient (not, vert, similar 400 °C/km), close to the surface at not, vert, similar 10 Ma. The Kung Co pluton was emplaced at about 22 Ma (U–Pb on zircon) at less than 10 km depth and 520–545 °C. Subsequent to its shallow emplacement, the pluton underwent fast thermal re-equilibration ending around 7.5 Ma, followed by a period of slow cooling caused either by the end of the thermal re-equilibration or by very slow exhumation (0.02–0.03 mm/yr) from not, vert, similar 7.5 Ma to at least 4 Ma. In either case the data suggest that the exhumation rate increased after 4 Ma. We infer this increase to be related to the initiation of the Kung Co normal fault. A critical examination of previously published data show that most not, vert, similar N–S Tibetan normal faults may have formed less than 5 Ma ago rather than in the Miocene as assumed by several authors. Such a young age implies that E–W extension is not related to the Neogene South Tibetan magmatism (25 to 8 Ma). Consequently, models relating E–W extension to magmatism, such as convective removal of the lower lithosphere, may be inappropriate. We rather think that this extension is related with local accommodation of boundary forces and displacements.
ISSN: 0012-821X

hal-00311791
https://hal.archives-ouvertes.fr/hal-00311791
DOI : 10.1016/j.epsl.2007.01.029

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Analogue and numerical models have shown that the strength of the lithospheric mantle controls the mode of lithosphere deformation. In extension, the presence or absence of a high strength brittle mantle respectively leads to localized or distributed rifting. However, first order geophysical data question the existence of such a brittle mantle. Here we use 2-D finite-element large strain modelling to quantify the impact of a ductile localizing mantle - instead of brittle - in triggering continental rifting. As a novelty, the mantle rheology considers the effect of grain boundary sliding during strain-induced grain size reduction, which may promote a significant strength drop and subsequent strain localization at low mantle temperature (< 700-800 °C). Our results reveal that such ductile localizing mantle implies varying modes of continental rifting that mainly depend on both the amount of weakening in the ductile mantle and the strength of the lower ductile crust. A medium to strong lower crust implies coupling between the upper crust and ductile localizing mantle, yielding to narrow continental rifting. In contrast, a weak lower crust implies decoupling between the upper crust and ductile localizing mantle, giving rise to a switch from distributed faulting at incipient strain to localized faulting at large strain. Ductile strain localization in the lithospheric mantle is therefore sufficient to trigger continental rifting, although a critical amount of weakening is required. Such ductile localizing mantle provides a relevant geological and mechanical alternative to the brittle mantle. It moreover provides a wider variety of modes of upper crustal faulting that are commonly observed in nature.
ISSN: 0040-1951

Droits : info:eu-repo/semantics/OpenAccess
insu-00924254
https://hal-insu.archives-ouvertes.fr/insu-00924254
https://hal-insu.archives-ouvertes.fr/insu-00924254/document
https://hal-insu.archives-ouvertes.fr/insu-00924254/file/Gueydan_precigout_2014_Tectonophysics.pdf
DOI : 10.1016/j.tecto.2013.11.029

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Isotopic fractionation of tritium is a highly relevant issue in radiation protection and requires certain radioecological considerations. Sound evaluation of this factor is indeed necessary to determine whether environmental compartments are enriched/depleted in tritium or if tritium is, on the contrary, isotopically well-distributed in a given system. The ubiquity of tritium and the standard analytical methods used to assay it may induce biases in both the measurement and the signification that is accorded to the so-called fractionation: based on an exhaustive review of the literature, we show how, sometimes large deviations may appear. It is shown that when comparing the non-exchangeable fraction of organically bound tritium (neOBT) to another fraction of tritium (e.g. tritiated water) the preparation of samples and the measurement of neOBT reported frequently led to underestimation of the ratio of tritium to hydrogen (T/H) in the non-exchangeable compartment by a factor of 5 % to 50 %. In the present study, corrections are proposed for most of the biological matrices studied so far. Nevertheless, the values of isotopic fractionation reported in the literature remain difficult to compare with each other, especially since the physical quantities and units often vary between authors. Some improvements are proposed to better define what should encompass the concepts of exchangeable and non-exchangeable fractions.
ISSN: 0160-4120

hal-01117744
https://hal.archives-ouvertes.fr/hal-01117744
https://hal.archives-ouvertes.fr/hal-01117744/document
https://hal.archives-ouvertes.fr/hal-01117744/file/Article%20review%20discrimination%20isotopique-envoy%C3%A9.pdf
DOI : 10.1016/j.envint.2013.12.020

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
ODP (Ocean Drilling Program)/IODP (Integrated Ocean Drilling Program) Site 1256 is located on the Cocos Plate in the Eastern Equatorial Pacific Ocean, in a 15 Ma old oceanic lithosphere formed at the EPR during a period of superfast spreading (>200 mm/yr). ODP/IODP Hole 1256D reached for the first time the contact between sheeted dikes and underlying gabbros. It consequently offers a unique opportunity to study in situ, in present-day oceanic crust, the root zone of the sheeted dike complex. This root zone is a thin, 100 m thick boundary layer between the magmatic system (i.e., the axial melt lens, similar to 1100 degrees C), and the overlying high temperature hydrothermal system (<= 450 degrees C). The understanding of interactions within this boundary layer is critical to that of crustal processes along mid-ocean ridges.;This work focuses on the petrophysical characterization of the root zone of the sheeted dike complex in order to further constrain the hydrothermal circulation system in the vicinity of the axial melt lens, as recorded in non-granoblastic dikes, granoblastic dikes, and varitextured gabbros. The petrophysical properties were determined from sample measurements in the laboratory and were compared to in situ downhole geophysical probing. The porosity structure is bipolar, depending on lithology, resulting in a layered system. Non-granoblastic dikes are generally altered in the greenschist fades (similar to>250 degrees C) with relatively high and interconnected (cementation index m similar to 1.72, electrical tortuosity tau similar to 28.3) porosity (1.5%). In contrast, gabbros are retrogressively metamorphosed in the amphibolite (similar to>450 degrees C) and greenschist facies, with lower porosity (1.3%) that involves numerous fissures and cracks, resulting in a more connected medium (m similar to 1.58, tau similar to 11.8) than non-granoblastic dikes. These cracks are more abundant but also tend to close with increasing depth as indicated in downhole geophysical data. Porosity and alteration, as viewed from surface electrical conductivity, appear to be directly correlated.
ISSN: 0040-1951

hal-00544556
https://hal.archives-ouvertes.fr/hal-00544556
DOI : 10.1016/j.tecto.2010.07.013

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The paper presents coastal structures design in the presence of waves by the minimization of a cost function. It aims to show that shape optimization can be efficiently applied to ocean engineering. This is an underlying guiding principle for the design of harbors or offshore breakwaters. We compute the solution of a specific simplified boundary value problem describing the short wave propagation toward a vertical sea cliff or vertical wall and modify accordingly the shape of defense structures in order to minimize a pre-defined cost function taking into account the strength (energy) of the water waves. The optimization procedure relies on a global semi-deterministic search algorithm able to escape from local minima.
ISSN: 0378-3839

hal-00411905
https://hal.archives-ouvertes.fr/hal-00411905
DOI : 10.1016/j.coastaleng.2007.06.006

Résumé : After a period of rapid development of the sites (an increase in both reared surface area and production), tropical shrimp aquaculture is currently being faced with critical problems due to economical and ecological constraints. In many countries with favourable conditions for shrimp aquaculture such as indonesia or Vietnam, sites are often badly selected and/or over-exploited. This conducts to sorne extent to decreases or collapses in the production due to the difficulty in predicting the maximum production capacity of the sites. Furthermore, it appears that production sustainability depends on many factors among which socio-economy and ecolo gy are of prime importance. The STD3 project titled « Assessment of tropical shrimp aquaculture impact on the environment in tropical countries using hydrobiology, ecology and remote sensing as helping tools for diagnosis )) was initiated in 1994, with the aim to study the sustainability of marine shrimp aquaculture in tropical areas, main! y Indonesia and Vietnam, through the following tasks: (i) improve site selection and study the impact of aquaculture on marine environments presenting a variable sensitivity to organic sewage, (ii) analyse the socio-economical aspects and profitability of the aquaculture industry and of common resources (iii) use remote sensing and geographical data bases for diagnosis and monitoring of site degradation (iv) reinforce the capacity of Asian scientists through training. Severa! aquaculture sites have been investigated in the Lampung region (South Sumatra, Indonesia), the Mekong delta (Vietnam) and on the West coast of New-Caledonia, providing a large range of typical ecosystems encountered in Asia and in the Pacifie, from coralline sites to coastal plains with mangrove and deltaic areas. The study concerned the spatial structure and seasonal influence of these ecosystems, the temporal variation during the course of the project (3 years) and the relation between the ecological structure and farm productions. Remote sensing provides a synoptic vision over large land expanses. Severa! scenes were processed for landuse mapping using conventional classification techniques. Concerning water quality assessment, a general relation for the Java sea was found between image and field data in terms of total suspended matter. Applying this relation to a new site in Sumatra has provided an initial approach to water type and, together with land use mapping, a preliminary assessment of the suitability of the area to shrimp aquaculture development. Socio-economic research has been focused on the identification ofneeds for collective action, including public policy, in the perspective of shrimp farming sustainability. The main concern is in the regulation of shrimp farming intensification and extensification at the scale of coastal ecosystemic entities in a common property resource management perspective. The common considered here is coastal water quality. Comparing the local development profiles and the institutional grounds for the design and implementation of collective management rules shows that variables such as land tenure system, farm owner socio-economic profile, social homogeneity or heterogeneity of the farmers are key factors to analyse the potential for sustainability. The defmition of water quality and the possible means to ensure its collective management are discussed. The main conclusion is that the economie incentives to farming development are strong but there is no significant difference among traditional, semi-intensive and intensive systems in terms of economie efficiency or wealth distribution. The description of the functioning of the different kinds of ecosystems make it possible to give an advice concerning the positioning of the activity inside the ecosystem, and furthermore to have a reference state in order to determine the impact of the activity on the coastal environnement. This impact can be summarized as an increase in the concentration of total suspended matt€?r, of particulate organic matter and of sulfate reducing bacterias. This organic ma~.er is either issued from rearing activities or from telluric origine, due to mangrove eradication when building the ponds. An evaluation of the relationship existing between productivity and characteristics of each ecosystem bas been conducted by correlating ecological indicators data (concentration of total suspended matter, particulate organic matter, chlorophyll, percentage of pheopigments in total pigments and cyanobacteria and sulfatereducing bacteria in water and sediments) with the average production of the farms. This comparison lead to the compilation of a scale of observed production integrating the range of these environmental parameters with shrimp production levels, bound to facilitate the positioning of shrimp farming in relation with the confmement leve! of each ecosystem. Lastly, ali geographie data originated from the various compartments of the study have been geo-referenced and loaded into a geographical information system. This allows to display any query made on spatial variables and their related statistical data, including the ir variations over the last few years and to reveal patterns and phenomena otherwise not obvious.
Le programme mis en oeuvre par la DRV (Paris, CREMA-L'Houmeau, DELIAO Brest, COP Tahiti, GIE/RA Nouvelle Calédonie), dans le cadre d'un projet européen STD3 «(Sciences et Technique au Service du Développement», en collaboration avec l'Université de Montpellier II, l'Ecole Nationale d'Agronomie de Rennes, l'ITC (Hollande), l'Institut Océanographique de Nha Trang (Vietnam), le BADC de Jepara et le BPPT de Jakarta (Indonésie), avait pour but la mise au point de méthodes permettant d'améliorer la sélection des sites ainsi que le suivi du développement et de l'impact de l'aquaculture des crevettes Péneides en milieu tropical pour éviter la surexploitation. Quatre axes de recherche ont été défmis : a) identifier la nature et quantifier les rejets de déchets issus de ce type d'aquaculture, b) définir les caractéristiques écologiques des écosystèmes susceptibles d'accueillir l'activité aquacole et suivre leur évolution sous l'influence des rejets, c) déterminer l'influence de la gestion des fermes et des ressources (aspects économiques) sur les performances de productivité, d) déterminer la capacité de la télédétection comme outil de diagnostic d'impact à l'échelle de la région, e) mener un programme de formation d'étudiants et jeunes chercheurs Vietnamiens et Indonésiens.

Droits : 1998 Ifremer
http://archimer.ifremer.fr/doc/00132/24357/22357.pdf
http://archimer.ifremer.fr/doc/00132/24357/

Éditeur(s) : Springer
Résumé : We present the global general circulation model IPSL-CM5 developed to study the long-term response of the climate system to natural and anthropogenic forcings as part of the 5th Phase of the Coupled Model Intercomparison Project (CMIP5). This model includes an interactive carbon cycle, a representation of tropospheric and stratospheric chemistry, and a comprehensive representation of aerosols. As it represents the principal dynamical, physical, and bio-geochemical processes relevant to the climate system, it may be referred to as an Earth System Model. However, the IPSL-CM5 model may be used in a multitude of configurations associated with different boundary conditions and with a range of complexities in terms of processes and interactions. This paper presents an overview of the different model components and explains how they were coupled and used to simulate historical climate changes over the past 150 years and different scenarios of future climate change. A single version of the IPSL-CM5 model (IPSL-CM5A-LR) was used to provide climate projections associated with different socio-economic scenarios, including the different Representative Concentration Pathways considered by CMIP5 and several scenarios from the Special Report on Emission Scenarios considered by CMIP3. Results suggest that the magnitude of global warming projections primarily depends on the socio-economic scenario considered, that there is potential for an aggressive mitigation policy to limit global warming to about two degrees, and that the behavior of some components of the climate system such as the Arctic sea ice and the Atlantic Meridional Overturning Circulation may change drastically by the end of the twenty-first century in the case of a no climate policy scenario. Although the magnitude of regional temperature and precipitation changes depends fairly linearly on the magnitude of the projected global warming (and thus on the scenario considered), the geographical pattern of these changes is strikingly similar for the different scenarios. The representation of atmospheric physical processes in the model is shown to strongly influence the simulated climate variability and both the magnitude and pattern of the projected climate changes.
Climate Dynamics (0930-7575) (Springer), 2013-05 , Vol. 40 , N. 9-10 , P. 2123-2165

Droits : The Author(s) 2013. This article is published with open access at Springerlink.com
http://archimer.ifremer.fr/doc/00138/24966/23079.pdf
DOI:10.1007/s00382-012-1636-1
http://archimer.ifremer.fr/doc/00138/24966/

Éditeur(s) : Amer Geophysical Union
Résumé : The origin of the Algerian margin remains one of the key questions still discussed in the Western Mediterranean sea, due to the imprecise nature and kinematics of the associated basin during the Neogene. For the first time, the deep structure of the Maghrebian margin was explored during the SPIRAL seismic survey. In this work, we present a N-S transect off Tipaza (west of Algiers), a place where the margin broadens due to a topographic high (Khayr-al-Din Bank). New deep penetration seismic profiles allow us to image the sedimentary sequence in the Algerian basin and the crustal structure at the continent-ocean boundary. Modeling of the wide-angle data shows thinning of the basement, from more than 15km in the continental upper margin to only 5–6km of oceanic-type basement in the Algerian basin, and reveals a very narrow or absent transitional zone. Analysis of the deep structure of the margin indicates features inherited from its complex evolution: (1) an oceanic-type crust in the deep basin, (2) similarities with margins formed in a transform-type setting, (3) a progressive deepening of the whole sedimentary cover, and the thickening of the Plio-Quaternary sediments at the margin foot, coeval with (4) a downward flexure of the basement in the basin. These features argue for a multiphased evolution of the margin, including (1) an early stage of rifting and/or spreading, (2) a late transcurrent episode related to the westward migration of the Alboran domain, and (3) a diffuse Plio-Quaternary compressional reactivation of the margin.
Journal Of Geophysical Research-solid Earth (0148-0027) (Amer Geophysical Union), 2013-08 , Vol. 118 , N. 8 , P. 3899-3916

Droits : 2013. American Geophysical Union. All Rights Reserved.
http://archimer.ifremer.fr/doc/00152/26333/24412.pdf
DOI:10.1002/jgrb.50318
http://archimer.ifremer.fr/doc/00152/26333/