Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
Fractures or discontinuities perpendicular to the least stress σ3 were generated in a synthetic rock analogue (granular, frictional, cohesive, and dilatant) material in axisymmetric extension tests. These fractures are of two types defined by the mean stress σ. When σ is very small, the fractures form through the mode I cracking at tensile σ3 equal to the material tensile strength. The fracture walls have smooth surfaces. At higher σ, these surfaces become rougher, with the topography features forming faint or delicate plumose patterns. The amplitude of the plumose topography increases with σ. The axial stress σ3 at fracturing reduces in magnitude and changes in sign with the σ increase. Thus σ3 orthogonal discontinuities can form at compressive σ3. SEM observations show that these discontinuities are deformation localization bands where the material is characterized by the heterogeneous decohesion and volume and porosity increase due to dilatancy. The band thickness is several grain sizes. At formation, the bands are not opened, so they are not mode I fractures. They become fractures with plumose fractography after the separation of the sample parts along the band. The formation mechanism of these discontinuities or fractures is not completely clear, but it is suggested that it represents a running constitutive instability in the form of dilatancy banding (with further σ increase the bands become inclined to σ1, i.e., shear). The similarity between the experimentally generated plumose surface fractures and natural joints is discussed, and it is suggested that they can be formed as propagating constitutive instabilities.
ISSN: 0148-0227

hal-00585846
https://hal.archives-ouvertes.fr/hal-00585846
DOI : 10.1029/2010JB008104

Éditeur(s) : HAL CCSD EDP Sciences
Résumé : International audience
This paper presents a paleo-hydrological study conducted on sediment flood deposits at two sites located in the Gardon Gorges, Southeast France. The first study site is a valley‑side terrace (referred to as site GE, located 10m above the channel bed) and the second is located in a cave (referred to as site GG, perched 15m above the bed level). Paleo‑flood events were identified by carefully analyzing each slackwater flood deposits. The flood units were then dated using a variety of dating techniques, namely 137Cs, 210Pbex, 14C geochemical analysis of mining‑contaminated slackwater flood sediments, archeological objects and the historic flood record. Hydraulic modeling was also carried out in order to verify the coherence between the stratigraphic records of flood deposits at the sites and the historic flood levels known along the river Gardon. It is demonstrated that all the major flood events of the 20th century can be identified at terrace GE. This type of geomorphological unit can therefore be used as a sound basis for a paleo-hydrological analysis of the Gardon Gorges. Furthermore, the analysis of the stratigraphic record at site GG demonstrates that the site can be used to trace the largest flood events that have occurred within the past 600 years. The study reveals that the frequency of extreme flood events increased during the Little Ice Age
Une étude paléo-hydrologique a été entreprise dans les Gorges du Gardon, où deux coupes sédimentaires ont été étudiées. La première provient d'une terrasse (coupe GE située à 10 m de hauteur au dessus de la rivière) et l'autre, d'une cavité (coupe GG localisée à 15 m au-dessus de la rivière). L'identification et la mise en évidence des différents paléo-événements de crue ont été établies grâce à l'inspection minutieuse de chaque dépôt sédimentaire et d'une étude géochronologique fine (137Cs, 210Pbex, 14C, métaux traces, objets archéologiques, historiques des crues). Nous avons souhaité évaluer la capacité des terrasses fluviatiles du Gardon à enregistrer des paléo-événements en comparant les coupes sédimentaires aux données historiques des hauteurs d'eau et aux résultats d'un modèle hydraulique 1D. Nous montrons que la terrasse GE enregistre la quasi-totalité des évènements du 20ème siècle et qu'à priori, ce type d'objet géomorphologique peut être utilisé pour toute étude paléo-hydrologique sur le Gardon. De plus, l'étude de la coupe GG (cavité perchée à 15 m) permet de reconstituer les évènements intenses au cours des 600 dernières années. Nous montrons une augmentation des crues extrêmes dans le Haut-Languedoc au cours du "Petit âge glaciaire".
ISSN: 0018-6368

hal-01108400
https://hal.archives-ouvertes.fr/hal-01108400
https://hal.archives-ouvertes.fr/hal-01108400/document
https://hal.archives-ouvertes.fr/hal-01108400/file/ly2014-pub00041935.pdf
DOI : 10.1051/lhb/2014037

Éditeur(s) : Editions de l'ORSTOM
Résumé : A research programm on the marine green turtle Chelonia mydas nesting on the two major reproduction sites for the species in the Indian Ocean, conducled over last 15 years, included intensive tagging programm. Processing of these lagging data provides estimations of adult female populations {or each site and season from two independent methods. First classical method is the ratio of total number of nests produced over a define time on the mean individual number of nests by female during the same time (November, December, January). The computed mean individual number ranges from 3 to 3.5 obtained over 2 to 3 months. The second method is the multiple capture-recapture method (JOLLY, 1965; SEBER, 1965; MANLY, 1984). Il is an original tentative of applying this method for the daily estimation of females number on a nesting site. The results obtained suggest this method to be applied for the species on other sites and to other marine turtle species. Population estimates obtained by these two independent methods are coherent Roughly, the two populations through seasonal nesting activity appear in wealthy state with a mean estimation number of 850 to 1100 females for Tromelin and more variable eslimations ranging from 2000 lo 11 000 females by season for Europa, considering lhe three major nesting months: November to January
Un programme d'observations sur les populations de tortue verte marine Chelonia mydas pondant sur les deux sites de ponte majeurs de l'espèce dans l'océan Indien, Tromelin et Europa, comportait notamment un programme intensif de marquage. L'exploitation de ces données de marquage a permis de réaliser des estimations du nombre de femelles pondant sur chaque site par deux méthodes différentes. La première méthode est celle, classiquement utilisée, du rapport entre le nombre total de pontes déposées pour une période donnée et le nombre moyen de pontes par femelle durant le même temps. On démontre que le nombre moyen individuel de ponte est de l'ordre de 3 à 3,5 pontes par saison. La deuxième méthode est celle des estimations par marquages-recaptures multiples (J OLL Y -SEBER, 1965; MANLY, 1984). C'est une utilisation originale de cette méthode pour l'estimation journalière des populations de tortues femelles sur un site de ponte, qui doit pouvoir être appliquée sur d'autres sites pour la même espèce et pour d'autres espèces de tortues marines. Les résultats obtenus par ces deux méthodes différentes sont cohérents. Schématiquement, on peut conclure à deux populations abondantes de 850 à 1 ZOO femelles sur Tromelin par saison et des estimations moyennes variant de 2 000 à Il 000 tortues par saison pour l'ensemble des plages d'Europa pour les trois mois principaux de ponte par saison: novembre à janvier.
Océanographie tropicale (0245-9418) (Editions de l'ORSTOM), 1986 , Vol. 21 , N. 1 , P. 3-22

Droits : ORSTOM
http://archimer.ifremer.fr/doc/00113/22406/20103.pdf
http://archimer.ifremer.fr/doc/00113/22406/

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
Time-lapse microgravity surveying combined with absolute gravity measurements is used to investigate water storage changes in a karst aquifer of similar to 100 km(2) area. The survey consists of 40 gravity stations measured with a relative gravimeter; absolute gravity is measured at three stations for each survey. In total, four gravity surveys are performed over a 2 year time period during consecutive wet and dry periods. Survey precisions range between 2.4 and 5 mu Gal, enabling statistically significant detection of 10 mu Gal change, i.e., similar to 0.25 m equivalent water level change. Observed gravity changes are coherent between consecutive survey periods, i.e., net water withdrawal and net water recharge is observed, reaching changes as high as 22 mu Gal. Observed gravity changes allow refining evapotranspiration estimates, which may serve to improve the water budget of the aquifer. High-and low-gravity amplitude zones characterize the karst system, demonstrating spatially variable storage behavior. Geomorphologic considerations are invoked to explain the location of preferential zones of water storage, and a conceptual model of water storage is discussed for the studied karst.
ISSN: 0148-0227

hal-00496400
https://hal.archives-ouvertes.fr/hal-00496400
DOI : 10.1029/2009JB006616

Éditeur(s) : Université Paris 7 – Denis Diderot
Résumé : Sea surface salinity (SSS) influences numerous oceanic phenomena, for instance surface water ventilation, deep water formation and thermohaline circulation. SSS also controls some ocean-atmosphere coupled processes, such as the intensity of freshwater flux and the penetration of heat flux and turbulence. Salinity is more difficult to measure than temperature from in situ surveys, which results in 20 times less data being currently available. Moreover, sea surface temperature (SST) is routinely estimated from satellites, which is not possible yet for SSS. Two space missions will fill this gap soon: SMOS from the European Space Agency and Aquarius/SAC-D from NASA and CONAE. To contribute to the SMOS project, we propose a method for estimating SSS from current satellite observations and for studying the mechanisms governing its variability. We developed a simplified model of the ocean mixed layer, based on the "slab mixed layer" formulation (Frankignoul et Hasselmann, 1977). This 2D horizontal model is implemented over the global ocean, using a near 100 km resolution, and integrated during a climatological year. Air-sea fluxes are taken from the ECMWF meteorological model (ERA40 reanalysis) and the surface currents are provided by altimeter data (SSALTO-DUACS analysis). The mixed layer depth (MLD) is derived from SST observations, using an original inversion technique. The MLD fields obtained from this inversion are well correlated to in situ estimates. This effective depth represents the air-sea fluxes penetration and ensures consistency between fluxes, les currents and SST. We first validate the simulation through examination of the heat balance in north-eastern Atlantic, by comparing to measurements and models from the POMME experiment. Then we study the salinity balance in the global domain, in terms of its geographical distribution and seasonal evolution. Equilibrium between the various processes appears generally more complex than for temperature. Noteworthy, the role of atmospheric flux is less predominant (22%), while geostrophic advection (33%) and diapycnal mixing (22%) contribute more strongly. Our results indicate this model succeeds in reconstructing SSS variability over most of the oceans. Daily SSS variations are also simulated, whereas they are not represented in current observed data at a global scale. Owing to its simplicity and fast computation, the model will be useful to the SMOS mission. It can help for the measurement calibration/validation and provide a first guess estimate to the sophisticated algorithm required for SSS restitution.
La salinité de surface des océans (SSS) influence de nombreux phénomènes océaniques, parmi lesquels la ventilation des eaux de surface, la formation d'eaux profondes et la circulation thermohaline. Elle détermine aussi certains processus couplés océan-atmosphère, notamment l'intensité du flux d'eau douce, la pénétration du flux de chaleur et de la turbulence. La mesure in situ de salinité est plus compliquée que celle de température, si bien qu'on dispose actuellement de 20 fois moins de données pour cette propriété. De plus, la température de surface (SST) est couramment estimée par satellite, ce qui n'est pas encore le cas de la SSS. Deux missions spatiales vont prochainement combler cette lacune : le satellite SMOS de l'Agence Spatiale Européenne et le satellite Aquarius/SAC-D de la NASA et de la CONAE. En préparation du projet SMOS, nous proposons une méthode pour estimer la SSS à partir des observations satellitaires actuelles et étudier les mécanismes de sa variabilité. Nous avons développé un modèle simplifié de couche mélangée océanique, basé sur la formulation "slab mixed layer" (Frankignoul et Hasselmann, 1977). Ce modèle 2D horizontal est implémenté sur l'océan global, avec une résolution proche de 100 km, et intégré au cours d'une année climatologique. Les flux air-mer proviennent du modèle météorologique ECMWF (réanalyse ERA40) et les courants de surface sont issus de l'altimétrie (analyse SSALTO-DUACS). La profondeur de la couche mélangée (MLD) est dérivée des observations de SST, grâce à une technique d'inversion originale. La MLD obtenue par inversion est bien corrélée aux estimations basées sur des données in situ. Cette profondeur effective représente la pénétration des flux air-mer et assure la cohérence entre les flux, les courants et la SST. La simulation est d'abord validée en examinant le bilan de chaleur dans l'Atlantique Nord-Est, par comparaison aux mesures et aux modèles de l'expérience POMME. Puis le bilan de salinité est étudié dans le domaine global, en termes de distribution géographique et d'évolution saisonnière. L'équilibre entre les différents processus est généralement plus complexe que pour la température. Notamment, le rôle du flux atmosphérique est moins prépondérant (22%), tandis que l'advection géostrophique (33%) et le mélange diapycnal (22%) contribuent fortement. Nos résultats montrent que ce modèle parvient à restituer la variabilité de la SSS sur la majeure partie des océans. Le modèle simule aussi les variations journalières de SSS, qui ne sont pas représentées à l'échelle globale dans les observations actuelles. Grâce à sa simplicité et à sa rapidité, le modèle pourra être utile dans le cadre de SMOS. Il pourra aider à la calibration/validation de la mesure et fournir une estimation a priori pour l'algorithme complexe nécessaire à la restitution de la SSS.

Droits : info:eu-repo/semantics/openAccess
http://archimer.ifremer.fr/doc/2006/these-2302.pdf
http://archimer.ifremer.fr/doc/00000/2302/

Éditeur(s) : HAL CCSD
Résumé : This study provides additional constraints on the relations between deformation, hydration and percolation of fluids and melts in the subcontinental lithospheric mantle beneath a craton and a rift, as well as their implication on its geodynamical behaviour. I have analysed the microstructures, the CPOs, and the hydrogen content of mantle xenoliths from the Kaapvaal craton, and two sets of xenoliths from different localities along the East African Rift (North Tanzanian Divergence and SE Ethiopia).The coarse-granular microstructures and the well-defined CPOs in Kaapvaal peridotites suggest a deformation followed by a long quiescence time. Orthorhombic olivine CPOs predominates, but axial-[100] and axial-[010] are also measured. Cratonic peridotites record multiple metasomatic episodes, leading to a significant compositional heterogeneity, which cannot be imaged by seismic studies. Olivine hydrogen contents are variable, but tend to increase until 150 km depth, reaching up to 50 ppm wt. H2O. The deeper samples are almost dry. Piston-cylinder experiments on hydrogen diffusion between a volatile-rich kimberlitic melt and forsterite suggest that the presence of CO2 in the system could significantly decrease water fugacity and thus forsterite hydration. These experimental results indicate that the hydrogen contents measured in olivine were acquired during a metasomatic event rather than during xenolith extraction by kimberlites. However, this metasomatism was not followed by remobilization of the cratonic root.In the North Tanzanian Divergence, localities within the rift axis and the volcanic transverse belt (Lashaine and Olmani) show significant differences in microstructures and olivine CPO patterns. In Lashaine, coarse-granular microstructures and orthorhombic to axial-[100] CPO patterns in olivine can be explained by transpressional deformation during the formation of the Mozambique belt, or by the occurrence of a remnant of a cratonic domain embedded within the Mozambique belt. Within the rift axis, porphyroclastic to mylonitic microstructures suggest a recent rift-related deformation accompanied by syn-kinematic melt-rock reactions, and followed by variable annealing. The strong heterogeneity in microstructures and olivine CPO suggests that this deformation was acquired during multiple tectonic events probably linked to episodic magma percolation, separated by quiescence episodes. The axial-[100] patterns in olivine and the oblique fast directions reported by SKS studies are coherent with transtensional deformation within the lithospheric mantle beneath the rift.The peridotites from SE Ethiopia are less recrystallized than the rift-axis Tanzanian peridotites, displaying coarse-porphyroclastic microstructures. Microstructures and orthorhombic CPOs in olivine suggest syn- to post-metasomatic deformation. S-waves polarization anisotropies calculated for these samples cannot explain alone the delay times reported by SKS studies in this part of the East-African Rift.
Les travaux réalisés durant cette thèse apportent de nouvelles contraintes sur les relations entre déformation, hydratation et percolation de fluides et/ou de magmas dans le manteau subcontinental sous un craton et sous un rift, et leurs implications sur son comportement rhéologique. Il repose sur l'analyse des microstructures, des OPRs et des teneurs en hydrogène de xénolites mantelliques du craton du Kaapvaal, et sur deux séries de xénolites provenant de différentes localités le long du rift Est-Africain (Divergence Nord Tanzanienne et SE de l'Ethiopie). Les microstructures granulaires à gros grains et les OPRs bien définies des péridotites du craton du Kaapvaal sont cohérentes avec un épisode de déformation suivi d'une longue période de quiescence. Les OPRs de l'olivine sont majoritairement à symétrie orthorhombique, mais des symétries axiale-[100] et axiale-[010] sont aussi mesurées. Les péridotites cratoniques enregistrent de multiples épisodes métasomatiques, ayant entraîné une hétérogénéité de compositions à petite échelle ne pouvant être détectée par les études sismiques. Les teneurs en hydrogène mesurées dans l'olivine sont variables, mais ont tendance à augmenter jusqu'à 150 km de profondeur, atteignant alors jusqu'à 50 ppm wt. H2O. En dessous de cette profondeur, les échantillons montrent des teneurs en hydrogène très faibles. Les expériences réalisées en piston-cylindre sur la diffusion de l'hydrogène issue d'un liquide kimberlitique vers de la forstérite suggèrent que la fugacité en eau pourrait fortement être diminuée par la présence de CO2, empêchant l'hydratation de l'olivine durant extraction des xénolites par les kimberlites. Ces résultats expérimentaux suggèrent que les teneurs en hydrogène dans l'olivine des péridotites du craton du Kaapvaal ont été acquises durant un épisode métasomatique en profondeur et non pendant leur extraction par les kimberlites. Ces teneurs n'ont toutefois pas à ce jour entraîné de remobilisation de la racine cratonique. Enfin, le calcul des propriétés sismiques des péridotites cratoniques révèle que les anisotropies générées par les OPRs de ces échantillons sont suffisantes pour expliquer les anisotropies mesurées par les ondes SKS et les ondes de surface.Les xénolites de la Divergence Nord-Tanzanienne, montrent des variations significatives de microstructures et d'OPR de l'olivine entre les péridotites des localités dans l'axe du rift et celles de la chaîne volcanique transverse (Lashaine et Olmani). A Lashaine, les microstructures granulaires à gros grains et les OPRs de type orthorhombique et axial-[010] peuvent être expliquée par une déformation en transpression liée à la formation de la chaîne Mozambique ou par la présence d'une relique d'un domaine cratonique à l'intérieur de la chaîne Mozambique. Dans l'axe du rift, les microstructures porphyroclastiques à mylonitiques suggèrent une déformation plus récente, accompagnée de réactions magma-roche sous des conditions proches du solidus, suivie d'un recuit variable. L'hétérogénéité des microstructures enregistrées par les échantillons du rift suggère de multiples épisodes de déformation localisée, probablement liés à l'injection percolation épisodique de magmas, espacés de périodes d'accalmie. Les OPRs de l'olivine de type axial-[100] et l'orientation des directions de polarisation des ondes SKS suggère que le rift s'est formé en régime de transtension Les péridotites du Sud-Est de l’Éthiopie présentent des microstructures porphyroclastiques à gros grains moins recristallisées qu'en Tanzanie. Les microstructures et les OPRs principalement de type orthorhombique suggèrent une déformation syn- à post-métasomatisme. Les anisotropies de polarisation des ondes S calculées pour ces échantillons sont insuffisantes pour expliquer à elles seules les déphasages des ondes SKS dans cette partie du rift.
https://tel.archives-ouvertes.fr/tel-01684759

Droits : info:eu-repo/semantics/OpenAccess
NNT : 2014MON20139
tel-01684759
https://tel.archives-ouvertes.fr/tel-01684759
https://tel.archives-ouvertes.fr/tel-01684759/document
https://tel.archives-ouvertes.fr/tel-01684759/file/43443_BAPTISTE_2014_archivage_cor.pdf

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
The outstanding exposure of deformation bands in a multilayer sequence of the Orange quarry, Provence, France, motivates a study investigating the development and controls of deformation band geometries by field mapping combined with finite element modeling. Field mapping yields new insights into angular relations between, and evolution of, the deformation bands as well as provides input parameters for the setup and boundary conditions of the numerical simulations using ADELI 2D. In particular, reverse-sense deformation bands are found to have developed within three of the four exposed layers of the multilayer stack with similar orientations to bedding, indicating layer-parallel contraction. Numerical simulations, carried out as a parametric study to investigate the influence on deformation band development and geometry, successfully reproduce the sequential development of deformation bands in the three layers as seen in the field as well as recreate the observed angular geometries of similar to 39 degrees to the maximum compression. This angular relationship is put into context with observations from other field studies and theoretical values to explore controls of deformation band orientations. Furthermore, band localization is impeded in the model by increased layer cohesive strength, demonstrating the importance of host-rock property variations on where localization of bands within the multilayer sequence. Results from both field investigation and numerical simulations are consistent with regional tectonics, where the strata underwent gentle folding due to thrust faulting at depth, and bring further insight into the development and geometry of deformation bands in both extensional and contractional tectonic regimes.
ISSN: 0148-0227

hal-00639452
https://hal.archives-ouvertes.fr/hal-00639452
DOI : 10.1029/2011JB008365

Éditeur(s) : Amer Geophysical Union
Résumé : Recent ROV dives and high-resolution bathymetric data acquired over the Ashadze fields on the Mid-Atlantic Ridge (13 degrees N) allow us to derive constraints on the regional and local geological setting of ultramafic-hosted hydrothermal fields. The active vent fields of Ashadze hydrothermal fields are located in the western axial valley wall, downslope from the termination of a prominent corrugated surface and in a transitional domain with respect to ridge segmentation. The study of the shipboard and ROV bathymetry shows that decameter (100 m by 60 m) to kilometer-scaled rockslides shape the axial valley wall slopes in this region. The Ashadze 1 vent field occurs on a coherent granular landslide rock mass that is elongated in an E-W direction. The Ashadze 1 vent field comprises hundreds of active and inactive sulfide chimneys. The Ashadze 2 vent field is located in a NNE-trending linear depression which separates outcrops of gabbros and serpentinized peridotites. Active black smokers in the Ashadze 2 field are located on ultramafic substratum in a 40-m diameter crater, 5-m deep. This crater recalls similar structures described at some vents of the Logatchev hydrothermal field (Mid-Atlantic Ridge 15 degrees N). We discuss the mode of formation for these craters, as well as that for a breadcrust-like array of radial fissures identified at Ashadze 1. We propose that hydrothermalism at Ashadze can be an explosive phenomena associated with geyser-like explosions. Our study also constrains the geological and geophysical context of the ultramafic-hosted Ashadze hydrothermal system that may use the oceanic detachment fault as a preferred permeability conduit.
Geochemistry Geophysics Geosystems (1525-2027) (Amer Geophysical Union), 2012-11 , Vol. 13 , N. 1 , P. Q0AG14

Droits : 2012. American Geophysical Union. All Rights Reserved.
http://archimer.ifremer.fr/doc/00111/22223/19895.pdf
DOI:10.1029/2012GC004433
http://archimer.ifremer.fr/doc/00111/22223/

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
3D seismic data located in the Gjallar Ridge (Vøring Basin, offshore Norway) reveals a closely-spaced polygonal fault system affecting more than 800 m of homogeneous mud-dominated Quaternary and Tertiary sequences. As some faults reach the modern seafloor, they represent an active polygonal fault system at present day. Even if the processes remain unclear and are still under debate, it is generally agreed that the initiation of polygonal faults is the result of shallow burial dewatering of fine-grained unconsolidated sediments by volumetric compaction. 3D seismic data are commonly interpreted by propagating horizons automatically and by picking faults manually. However, in the case of polygonal fault intervals, this approach is time consuming due to the huge number of faults and because automatic propagation can be misleading. In this study, we applied a new technique of 3D seismic interpretation based on a sequential stratigraphy analysis, using the new PaleoScan© software (Eliis Company). It allowed us to build a 3D geological model computing more than 300 horizons within the faulted intervals. We then used the coherency attribute, depicting anomalies in the shape of seismic waveform like faults, in order to constrain a possible link between fault distribution and stratigraphic levels. Our approach allows fault throws to be calculated in milliseconds on any polygonal fault plane. The result shows that fault segments have been reactivated by dip-linkage. Distribution of faults depends on mechanical units, intervals characterized by different petrophysical properties, which are independent from lithological and diagenetic changes. According to these results, we propose a model showing the evolution of polygonal fault intervals in which faulting stages are separated by a quiescence phase during burial. A first tier of polygonal faults is initiated at a specific depth, according to the Cam-clay model. Then, following a period of quiescence during which mud-rich sediments continued to accumulate, new fault segments are initiated above the first mechanical unit and within this undeformed interval. New nucleated faults then connect downward to pre-existing underlying polygonal fault system, thus progressively increasing the thickness of the faulted interval.
ISSN: 0025-3227

hal-00772470
https://hal.archives-ouvertes.fr/hal-00772470
DOI : 10.1016/j.margeo.2012.07.016

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Deep-seated gravitational spreading (DSGS) affects the slopes of formerly glaciated mountain ridges. On Mars, DSGS has played a key role in shaping the landforms of the giant Valles Marineris troughs. Though less spectacular, DSGS is common in terrestrial orogens, where understanding its mechanics is critical in the light of the ongoing climate change because it is a potential source of catastrophic landslides in deglaciated valleys. We conducted parametric numerical studies in order to identify important factors responsible for DSGS initiation. DSGS models are computed using an elastoviscoplastic finite element code. Using ADELI's software, we reproduce topographic ridge spreading under the effect of valley unloading. Two types of spreading topographic ridges are investigated, homogeneous or with horizontal rheological layering. We find that gravitational instabilities are enhanced by high slopes, which increase gravitational stress, and low friction and cohesion, which decrease yield stress. In the unlayered ridge, instability is triggered by glacial unloading with plastic strain concentration inside the ridge and at the base of the high slopes. Vertical fractures develop in the upper part of the slope, potentially leading to fault scarps. Ridge homogeneity promotes a deformation mode controlled by uphill-facing normal faulting and basal bulging. In the second case, the ridge encompasses horizontal geological discontinuities that induce rock mass anisotropy. Discontinuity located at the base of the slope accumulates plastic strain, leading to the formation of a sliding plane evolving into a landslide. The presence of a weak layer at ridge base therefore promotes another slope deformation mode ending up with catastrophic failure. Mechanical conditions and slope height being equal, these conclusions can probably be extrapolated to Earth. Compared with Mars, DSGS on Earth is inhibited because terrestrial topographic gradients are lower than in Valles Marineris, an effect counterbalanced by increased gravitational stress, where the intensity of deformation is enhanced because of the Earth gravity potential.
ISSN: 0169-555X

hal-01420007
https://hal.archives-ouvertes.fr/hal-01420007
DOI : 10.1016/j.geomorph.2016.06.011

Éditeur(s) : Pergamon-elsevier Science Ltd
Résumé : A complete and optimized scheme of lettered marine isotope substages spanning the last 1.0 million years is proposed. Lettered substages for Marine Isotope Stage (MIS) 5 were explicitly defined by Shackleton (1969), but analogous substages before or after MIS 5 have not been coherently defined. Short-term discrete events in the isotopic record were defined in the 1980s and given decimal-style numbers, rather than letters, but unlike substages they were neither intended nor suited to identify contiguous intervals of time. Substages for time outside MIS 5 have been lettered, or in some cases numbered, piecemeal and with conflicting designations. We therefore propose a system of lettered substages that is complete, without missing substages, and optimized to match previous published usage to the maximum extent possible. Our goal is to provide order and unity to a taxonomy and nomenclature that has developed ad hoc and somewhat chaotically over the decades. Our system is defined relative to the LR04 stack of marine benthic oxygen isotope records, and thus it is grounded in a continuous record responsive largely to changes in ice volume that are inherently global. This system is intended specifically for marine oxygen isotope stages, but it has relevance also for oxygen isotope stages recognized in time-series of non-marine oxygen isotope data, and more generally for climatic stages, which are recognized in time-series of non-isotopic as well as isotopic data. The terms “stage” and “substage” in this context are best considered to represent climatostratigraphic units, and thus “climatic stages” and “climatic substages”, because they are recognized from geochemical and sedimentary responses to climate change that may not have been synchronous at global scale.
Quaternary Science Reviews (0277-3791) (Pergamon-elsevier Science Ltd), 2015-03 , Vol. 111 , P. 94-106

Droits : 2015 Elsevier Ltd. All rights reserved.
http://archimer.ifremer.fr/doc/00251/36216/35796.pdf
DOI:10.1016/j.quascirev.2015.01.012
http://archimer.ifremer.fr/doc/00251/36216/

Résumé : L’objet de cette thèse est l’étude des comportements mécanique et à la corrosion d’un nouveau système de fondation, dit pieux SPIRMEC, adapté aux structures légères. Le travail s’est focalisé sur deux grands aspects. Le premier aspect concerne l’analyse du comportement sous chargement axiale des pieux SPIRMEC sur la base de l’expérimentation et de la modélisation numérique dans un sol mou non cohésif. Quant au deuxième aspect, il traite du problème de la corrosion de l’acier constituant le pieu dans un environnement tropical humide. Le comportement des pieux SPIRMEC sous une charge axiale de traction, dans un sol fin non cohésif, a montré le développement d’une surface cylindrique de rupture. Celle-ci ne dépend pas de la configuration géométrique des pieux tel que : l’espacement S, le diamètre d’hélice Dh et le diamètre du tube d. En adoptant ce critère de rupture et à l’aide d’une analyse statistique des données, nous avons proposé quatre méthodes analytiques de prédiction de la capacité portante des pieux SPIRMEC à partir des essais in-situ et au laboratoire qui sont: •Méthode CPT basée sur la résistance de pointe pénétromètrique (essai CPT), •Méthode MPT basée sur la pression limite pressiomètrique (essai MPT), •Méthode du couple d’installation, •Méthode analytique basée sur les paramètres de cisaillement de sol notamment l’angle de frottement interne (essais triaxial et boîte de cisaillement). Ces méthodes tiennent compte de la géométrie du pieu, du procédé de mise en oeuvre et de la compacité du sol. L’analyse de performance des méthodes proposées a montré que les méthodes analytique et CPT représentent mieux le comportement des pieux testés. La modélisation numérique du comportement des pieux SPIRMEC sous charge axiale de traction a été également étudiée à l’aide du code de calcul Plaxis 2D. Un modèle axisymétrique a été adopté pour modéliser la géométrie de la structure. Le modèle de comportement hardening soil a été retenu pour modéliser le comportement élastoplastiq des couches de sol. Un modèle élastique linéaire a été retenu pour le pieu. Quant au comportement de l’interface sol-structure, il a été pris en compte par un modèle élastoplastique basé sur les critères de Mohr-Coulomb. L’expansion du sol résultant de l’installation des pieux a été approchée par une cavité cylindrique. Cette dernière a été modélisée par des déformations volumiques anisotropes. Nous avons constaté, qu’appliquer une déformation volumique de l’ordre de 40% permet une bonne concordance entre les résultats numériques et expérimentaux. L’étude paramétrique nous a également permis de constater l’existence d’une variation linéaire entre la capacité portante et l’espacement S. Le comportement de l’acier galvanisé dans le sol a été également étudié au moyen de trois approches: électrochimique, visuelles grâce au microscope électronique et gravimétrique. Les tests électrochimiques de corrosion du zinc ont été réalisés dans la solution de sol artificielle pour deux périodes bien distinctes : saison des pluies et après 8 mois de contact sol-pieu. Une forte dépendance est constatée de la vitesse de corrosion de zinc au pH et à la conductivité de la solution. La vitesse de corrosion est plus importante en saison des pluies qu’après 8 mois de contact de pieu avec le sol. Les fortes concentrations en sulfates semblent augmenter la vitesse de corrosion. Les analyses menées au MEB montrent que la zone de fluctuation de nappe et en surface externe (sol/air) sont les zones les plus corrodées. La comparaison entre les différentes techniques d’évaluation de la vitesse de corrosion a montré que l’eau de nappe peut être utilisée comme un milieu représentatif du profil chimique d’un sol non cohésif et légèrement granulaire.
The purpose of this thesis is to study the both behaviors mechanical and of the corrosion of a new foundation system, called spirec piles, for lightweight structures. The work was based on two main aspects. The first aspect concerns the analysis of behavior of the spirmec piles under axial loading on the basis of experimental and numerical modeling in a non-cohesive soft soil. On the second aspect, it addresses the problem of corrosion of steel forming the pile in a humid tropical environment. The behavior of the tested piles under axial traction load, in a non-cohesive soil, showed the development of a cylindrical surface of failure. This does not depend on the geometrical configuration of the tested piles such that: the spacing s, the helix diameter dh and the diameter of the shaft. By adopting this failure criterion and using statistical data analysis, we proposed four analytical methods for predicting the bearing capacity of the piles from in-situ and laboratory tests, which are: cpt method based on tip resistance penetrometer (cpt test), mpt method based on pressuremeter limit pressure (test mpt), method of installation torque and analytical method based on the shear parameters of soil (triaxial tests and shear box). These methods take into account the geometry of the pile, the method and implementation of soil compaction. Performance analysis of the proposed methods showed that the analytical methods and cpt represent better the behavior of piles tested. An axisymmetric condition was assumed to model this geometry in two-dimensional space. In this study, we proposed to model the pipe screw pile with plates elements available in plaxis 2d. The helixes were modeled as circular disks. Interface elements were incorporated along the pile to simulate the soil-pile interaction. Hardening soil model was chosen to describe the soil with drained behavior was assigned for all layers. Linear elastic for pile and elastic plastic model based on the mohr-coulomb criterion was used to describe the interface behavior. The lateral expansion generated by the pile shaft was modeled by anisotropic volumetric strains (ɛxx=ɛzz, ɛyy=0). The pile behavior under tensile loading at different volumetric strains, it is clear that the best fit was obtained at volumetric strain of 40%. The parametric study also allowed us to establish the existence of a linear variation between the bearing capacity and spacings. The behavior of the galvanized steel in the ground has also been studied using three approaches such as: electrochemical, microscopic imaging and gravimetrically. Electrochemical tests of the corrosion of the zinc have been made in artificial soil solution into two periods, the rainy season and after eight months of contact soil-pile. Is a strong dependence of the observed corrosion rate of the zinc at the ph and conductivity of the solution. The corrosion rate is higher in the rainy season compared to eight months of contact of the pile with soil. High sulfate concentrations increase the rate of corrosion. The meb analysis shows that the fluctuation zone of the water table is the most corroded area. Comparison between the different methods of evaluating the corrosion rate showed that the ground water may be used as a representative profile of the chemical environment of a non-cohesive soil and slightly granular.

http://www.theses.fr/2014AGUY0790/document

Résumé : La tuberculose, maladie très ancienne, est plus que jamais présentée sur la scène sanitaire mondiale avec 9 millions de nouveaux cas par an. Cette maladie, qui demeure une cause majeure de mortalité, est un des problèmes les plus difficiles à résoudre en santé publique et à échelle internationale. Les diverses programmes de lutte, lancés par l’Organisation Mondiale de la Santé (OMS), pour prévenir et garantir la guérison des patients tuberculeux, se heurtent à des difficultés qui hypothèquent leur efficacité. En effet, l'expansion du virus de rinimunodéficience humaine (VIII) et son influence néfaste sur la susceptibilité à la tuberculose, l'accroissement rapide de la tuberculose multirésistante, la pauvreté ainsi que la croissance démographique, sont un ensemble de facteurs préjudiciables à l'application des mesures préventives et curatives. Les contextes économiques difficiles conduisant indubitablement au cumul de ces facteurs, ont fait une césure entre les pays riches et les pays pauvres quant à l'incidence et la révolution de la tuberculose à échelle mondiale. Pour atténuer la disparité des résultats des luttes antituberculeuses, les méthodologies employées en épidémiologie de la tuberculose doivent s'inscrire dans une démarche d'efficacité. Les marqueurs moléculaires, indispensables à l'identification et à la classification des souches appartenant au complexe Mycobacterium tuberculosis (MTC) ont chacun des potentialités qui leur sont propres dont il convient de cerner pour une utilisation adéquate dans les études épidémiologiques et phylogénétiques. Le but de cette thèse consiste à extraire des connaissances nouvelles des résultats de génotypage stockées dans les bases de données, connaissances relatives au polymorphisme du support génomique pour estimer la contribution de chaque marqueur dans la classification de MTC. Le recours à différentes méthodes de reconstruction phylogénétique et de modélisation des données fut indispensable. A la lumière des résultats obtenus, cette thèse propose une nouvelle méthodologie de classification, pour rétablissement d'une phylogéographie robuste de MTC en relation avec l'histoire des migrations humaines qui aurait débutée en Afrique subsaharienne. Chaque méthode de génotypage ayant une efficience et un cout propres, qu'il convient de mesurer par rapport aux moyens disponibles et aux résultats escomptes, il est donc intéressant de renforcer la connaissance des marqueurs et de proposer différentes alternatives menant à la classification des mycobactéries. Ainsi, les résultats obtenus dans cette thèse apportent plus de cohérence aux solutions proposées pour la caractérisation des clones de MTC circulant dans le monde.
Tuberculosis, very old disease, is more than ever presented on the global health scene with 9 million new cases per year. This disease, which remains a major cause of mortality is one of the most intractable public health and international issues. The various control programs, launched by the World Health Organization (WHO) to prevent and guarantee the cure of tuberculosis patients face difficulties that undermine their effectiveness. Indeed, the expansion of human virus rinimunodéficience (VIII) and its negative influence on susceptibility to tuberculosis, the rapid growth of multidrug-resistant tuberculosis, poverty and population growth, are a set of factors detrimental to application of preventive and curative measures. The difficult economic circumstances undoubtedly leading to accumulation of these factors have a break between rich and poor countries about the impact and the revolution of tuberculosis worldwide. To address the disparity of the results of tuberculosis struggles, the methodologies used in epidemiology of tuberculosis must be part of a process efficiency. Molecular indispensable to the identification and classification of strains belonging to the Mycobacterium tuberculosis complex (MTC) markers each have their own potentials that need to be identified for proper use in epidemiological and phylogenetic studies. The purpose of this thesis is to extract new knowledge of the results of genotyping data stored in databases, knowledge of the polymorphism of genomic carrier to estimate the contribution of each marker in the classification of TCM. The use of different methods of phylogenetic reconstruction and modeling data was essential. In light of the results obtained, the thesis proposes a new classification methodology for a robust recovery phylogeography of TCM in connection with the history of human migration have started in sub-Saharan Africa. Each genotyping method with cost efficiency and equity, should be measured in relation to the resources available and discounts results, it is interesting to strengthen the knowledge of markers and propose alternatives leading to the classification of mycobacteria. Thus, the results obtained in this thesis bring more coherence to the proposed characterization of clones MTC circulating worldwide solutions.

http://www.theses.fr/2012AGUY0518/document

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
A dense, local network of 30 geodetic markers covering a 50 × 60 km2 area in the southwestern European Alps (Briançon region) has been temporarily surveyed in 1996, 2006 and 2011 by GPS. The aim is to measure the current deformation in this seismically active area. The study zone is characterized by a majority of extensional and dextral focal mechanisms, along north–south to N160 oriented faults. The combined analysis of the three measurement campaigns over 15 years and up to 16 years of permanent GPS data from the French RENAG network now enables to assess horizontal velocities below 1 mm/year within the local network. The long observation interval and the redundancy of the dense campaign network measurement help to constrain a significant local deformation pattern in the Briançon region, yielding an average E–W extension of 16 ± 11 nanostrain/year. We compare the geodetic deformation field to the seismic deformation rate cumulated over 37 years, and obtain good coherencies both in amplitude and direction. Moreover, the horizontal deformation localized in the Briançon region represents a major part of the Adriatic-European relative plate motion. However, the average uplift of the network in an extensional setting needs the presence of buoyancy forces in addition to plate tectonics.
ISSN: 0264-3707

hal-01119724
https://hal.archives-ouvertes.fr/hal-01119724
DOI : 10.1016/j.jog.2015.02.001

Éditeur(s) : HAL CCSD Elsevier
Résumé : The Gulf of Aigues-Mortes (NW Mediterranean Sea) is a midshelf zone whose scale is an intermediate between the nearshore scale (0–10 m depth) and the coastal scale (including the whole continental shelf). Its hydrodynamics is investigated for the first time. ADCP, CTD and thermosalinograph data were collected during three short cruises (HYGAM; March 6–7, 20–21, April 5–6, 2005). They were scheduled approximately every 15 days to sample the gulf circulation under different weather conditions. Moreover, the cruise data were used to validate the Symphonie model, a 3D primitive equations circulation model. The circulation features displayed by in situ data were well reproduced by Symphonie. A downscaling modelling approach was implemented, the largest scale being obtained by the replay of the MFSTEP regional model of the North-Western Mediterranean Sea. The analysis, closely coupling in situ measurements and model results, provides information that would not have been obtained using data separately. The great variability of the oceanic circulation at this scale is well evidenced. Winds are the main forces, not only locally but also at a larger scale. North winds generate coherent structures interacting with the general Mediterranean circulation. The explanation of the induced currents is then not straightforward, some of them being, for example, northward. South and southeast winds reinforce the sloping surface, the latter allowing the geostrophic equilibrium with longshore currents. This study, focused on the end of winter 2004–2005, also enhances the heat fluxes from offshore to nearshore, as well as the initiation of shelf dense waters. The knowledge of the midshelf oceanic circulation is then applied to run a numerical experiment which describes both the dispersion of a fictive contaminant from a point S (at the centre of the GAM), and evaluates the risk of contamination of the beaches along the GAM shores.
ISSN: 0278-4343

hal-00196620
https://hal.archives-ouvertes.fr/hal-00196620
DOI : 10.1016/j.csr.2007.06.006

Éditeur(s) : HAL CCSD
Résumé : International audience
This paper presents the background for the calculation of anisotropic piezoelectric properties of single crystals and the graphical display of the results in two or three dimensions, and the calculation of the aggregate properties from constituent crystals and the texture of the aggregate in a coherent manner. The texture data can be obtained from a wide range of sources, including pole figure diffraction and single orientation measurements (electron backscattered diffraction, electron channelling pattern, Laue Pattern, optical microscope universal-stage). We consider the elastic wave propagation in piezoelectric crystals as an example of the interaction of electrical (2nd rank tensor), piezoelectric (3rd rank tensor) and elastic properties (4th rank tensor). In particular, we give explicit formulae for the calculation of the Voigt averaged tensor from individual orientations or from an orientation distribution function. For the latter we consider numerical integration and an approach based on the expansion into spherical harmonics. We illustrate the methods using single crystals, polycrystalline quartz measured using electron channelling patterns and ideal Curie limiting groups applied to quartz aggregates. This paper also serves as a reference paper for the mathematical tensor capabilities of the texture analysis software MTEX
Geological Society Special Publication, 409

hal-01277789
https://hal.archives-ouvertes.fr/hal-01277789
DOI : 10.1144/SP409.2

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
Claystone caprocks are often the ultimate seal for CO2 underground storage when residual CO2 gas reaches the reservoir top due to buoyancy. Permeability changes of a fractured claystone due to seepage of CO2-enriched brine and water vapor-saturated CO2 gas are investigated. Results show that brine flow induces a large porosity increase (up to 50%) in the vicinity of the fracture due to dissolution of calcite and quartz, while permeability remains unchanged. Conversely, cyclic flows of CO2-brine and CO2-gas increase the fracture aperture abruptly after each gas flow period, producing a progressive decrease of the caprock seal capacity. Aperture increase is controlled by decohesion of the clay framework within a micrometer-scale-thick layer induced by CO2-gas acidification. Results show that hydraulic aperture increases linearly with duration of the preceding CO2-brine flow period, emphasizing the kinetic control of the quartz grains dissolution during the brine flow periods.
ISSN: 0094-8276

hal-00412332
https://hal.archives-ouvertes.fr/hal-00412332
DOI : 10.1029/2008GL034467

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Two in situ concrete/claystone interfaces were sampled at the laboratory level in the Andra Meuse/Haute Marne (France) Underground Research Laboratory (URL) in order to study five years of interactions between Callovian-Oxfordian (COx) claystone and two cementitious materials (concrete bottom slab and shotcrete on the walls of the main gallery), with a specific focus on sulfur. Combined mineralogical, chemical and sulfur isotopic investigations were carried out to define the degree of the perturbation of the sulfur system in the claystone and in both the cementitious materials. At both interfaces, results show that the main perturbation on the claystone side is the formation of scarce μm-sized gypsum, the sulfur content of which is essentially derived from pyrite oxidation. The distribution of gypsum is highly correlated with the fissure network of the damaged zone due to excavation of the gallery. Its presence is also often associated with a loss of cohesion of the concrete/claystone interface. Due to the small amounts of gypsum and its μm-size, measurements were performed by ion microprobe. Adaptations were needed on account of the reactivity of gypsum and sulfates in general under the beam. The use of ion microprobe analysis provided evidence of high local isotopic heterogeneity that could be attributed to kinetic fractionation effects. Some analyses suggest a minor contribution of dissolved sulfates in pore water of claystone and possibly of concrete. The perturbation on the concrete side is marked by a significant increase in the bulk sulfur content within three millimeters of the interface with the claystone, showing a sulfur gradient from claystone to concrete. The main objective of this work was to define the extent of the chemical and mineralogical perturbations, taking into account in situ URL conditions, i.e. hydrodynamic conditions (shotcrete sprayed on the gallery walls and subjected to ventilation of the galleries), damaged zone of claystone induced by excavation and multi-scale heterogeneity. This identifies the relevant parameters to better constrain predictive reactive transport models of concrete/claystone interactions at a realistic scale.
ISSN: 0079-1946

hal-01055790
https://hal-brgm.archives-ouvertes.fr/hal-01055790
DOI : 10.1016/j.pce.2014.01.003

Éditeur(s) : HAL CCSD
Résumé : International audience
De nombreux pays africains en transition démocratique connaissent de violentes crises postélectorales, qui mettent en péril la cohésion sociale et la stabilité des institutions politiques. La contestation des élections et la violence qui s’ensuit est un problème institutionnel de régulation de la concurrence politique. En conséquence, la prévention des crises électorales et le renforcement du processus de démocratisation impliquent la confiance des acteurs politiques et civils dans les résultats déclarés par les instances électorales. A ce titre, les TIC sont de plus en plus réclamées dans le processus électoral pour en garantir la transparence. Aussi, ce texte proposetil l’expérience élargie du “Parallel Vote Tabulation“ (PVT) comme une solution palliative pour éviter la manipulation des informations et des résultats en période électorale.
Les écosystèmes numériques et la démocratisation informationnelle : Intelligence collective, Développement durable, Interculturalité, Transfert de connaissances
Schoelcher, France

hal-01258325
https://hal.univ-antilles.fr/hal-01258325
https://hal.univ-antilles.fr/hal-01258325/document
https://hal.univ-antilles.fr/hal-01258325/file/Tahirou%20KONE.pdf

Éditeur(s) : HAL CCSD Oxford University Press (OUP)
Résumé : In this paper we present the potential of a new compact superconducting gravimeter (GWR iGrav) designed for groundwater monitoring. At first, 3 yr of continuous gravity data are evaluated and the performance of the instrument is investigated. With repeated absolute gravity measurements using a Micro-g Lacoste FG5, the calibration factor (−894.8 nm s−2 V−1) and the long-term drift of this instrument (45 nm s−2 yr−1) are estimated for the first time with a high precision and found to be respectively constant and linear for this particular iGrav. The low noise level performance is found similar to those of previous superconducting gravimeters and leads to gravity residuals coherent with local hydrology. The iGrav is located in a fully instrumented hydrogeophysical observatory on the Durzon karstic basin (Larzac plateau, south of France). Rain gauges and a flux tower (evapo-transpiration measurements) are used to evaluate the groundwater mass balance at the local scale. Water mass balance demonstrates that the karst is only capacitive: all the rainwater is temporarily stored in the matrix and fast transfers to the spring through fractures are insignificant in this area. Moreover, the upper part of the karst around the observatory appears to be representative of slow transfer of the whole catchment. Indeed, slow transfer estimated on the site fully supports the low-flow discharge at the only spring which represents all groundwater outflows from the catchment. In the last part of the paper, reservoir models are used to characterize the water transfer and storage processes. Particular highlights are done on the advantages of continuous gravity data (compared to repeated campaigns) and on the importance of local accurate meteorological data to limit misinterpretation of the gravity observations. The results are complementary with previous studies at the basin scale and show a clear potential for continuous gravity time-series assimilation in hydrological simulations, even on heterogeneous karstic systems.
ISSN: 0956-540X

hal-01526965
https://hal.archives-ouvertes.fr/hal-01526965
https://hal.archives-ouvertes.fr/hal-01526965/document
https://hal.archives-ouvertes.fr/hal-01526965/file/fores2016.pdf
DOI : 10.1093/gji/ggw396