Éditeur(s) : HAL CCSD Frontiers Media
Résumé : International audience
We present high resolution observations of microstructure and texture evolution during dynamic recrystallization (DRX) of ice polycrystals deformed in the laboratory at high temperature (≈0.98Tm). Ice possesses a significant viscoplastic anisotropy that induces strong strain heterogeneities, which result in an early occurrence of DRX mechanisms. It is therefore a model material to explore these mechanisms. High resolution c-axis measurements at sample scale by optical techniques and full crystallographic orientation measurements by cryo-Electron Back Scattering Diffraction (EBSD) provide a solid database for analyzing the relative impact of the macroscopic imposed stress vs. the local and internal stress fields on DRX mechanisms. Analysis of misorientation gradients in the EBSD data highlights a heterogeneous dislocation distribution, which is quantified by the Nye tensor estimation. Joint analyses of the dislocation density maps and microstructural observations highlight spatial correlation between high dislocation density sites and the onset of nucleation taking place by grain-boundary bulging, subgrain rotation or by the formation of kink-bands.
ISSN: 2296-6463

hal-01515284
https://hal.univ-lorraine.fr/hal-01515284
DOI : 10.3389/feart.2015.00081

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Large sand intrusions often exhibit conical morphologies analogous to magmatic intrusions such as saucer-shaped or cup-shaped sills. Whereas some physical processes may be similar, we show with scaled experiments that the formation of conical sand intrusions may be favoured by the pore-pressure gradients prevailing in the host rock before sand injection. Our experiments involve injecting air into a permeable and cohesive analogue material to produce hydraulic fractures while controlling the pore pressure field. We control the state of overpressure in the overburden by applying homogeneous basal pore pressure, and then adding a second local pore pressure field by injecting air via a central injector to initiate hydraulic fractures near the injection point. In experiments involving small vertical effective stresses (small overburden, or high pore fluid overpressure), the fracturing pressure (lambda(fract)) is supralithostatic and two dipping fractures are initiated at the injection point forming a conical structure. From theoretical considerations, we predict that high values of lambda(fract), are due to strong cohesion or high pore fluid overpressure distributed in the overburden. Such conditions are favoured by the pore pressure/stress coupling induced by both pore pressure fields. The dips of cones can be accounted for elastic-stress rotation occurring around the source. Contrary to magmatic chamber models, the aqueous fluid overpressure developed in a parent sandbody (and prevailing before the formation of injectites) may diffuse into the surrounding overburden, thus favouring stress rotation and the formation of inclined sheets far from the parent source. For experiments involving higher vertical effective stresses (thick overburden or low pore fluid overpressure), the fracturing pressure is lower than the lithostatic stress, and a single fracture is opened in mode I which then grows vertically. At a critical depth, the fracture separates into two dilatant branches forming a flat cone. We make use of a P.I.V. (Particle Imaging Velocimetiy) technique to analyse plastic deformation, showing that these inclined fractures are opened in mixed modes. Close to the surface, they change into steep shear bands where fluids can infiltrate. The final morphology of the fracture network is very similar to the common tripartite architecture of various injection complexes, indicating that different mechanisms may be involved in the formation of dykes. Feeder dykes under the sill zones may open as tensile fractures, while overlying dykes may be guided by the deformation induced by the growth of sills. These deformation conditions may also favour the formation of fluid escape structures and pockmarks. (C) 2011 Elsevier B.V. All rights reserved.
ISSN: 0012-821X

hal-00745640
https://hal.archives-ouvertes.fr/hal-00745640
DOI : 10.1016/j.epsl.2011.10.029

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The interplay between fault zone cataclasis and cementation is important since both processes can drastically reduce the permeability of faults in porous sandstones. Yet the prediction of fault cementation in high-porosity sandstone reservoirs remains elusive. Nevertheless, this process has rarely been investigated in shallowly buried faults (<2 km; T°<80 °C) where its sealing capacity could be acquired early in the geological history of a reservoir. In this paper, the macro- and microscopic analysis of a fault zone in the porous Cenomanian quartz arenite sands of Provence (France) shows that silica diagenesis occurs in the most intensely-deformed cataclastic parts of the fault zone. This fault zone shows 19–48% of its total thickness occupied by low-porosity quartz-cemented cataclastic shear bands whose porosities range from 0 – ca. 5%. The analysis of the weathering profile around the fault zone reveals the presence of groundwater silcretes in the form of tabular, tightly silicified concretions cross-cut by the fault. Detailed transmitted light, cold-cathodoluminescence and scanning electron microscopy analyses of the silica cements (from the fault and the silcrete) reveal that all the silica cements originate from groundwater diagenetic processes. This study therefore shows that silica cementation can occur specifically in fault zones and as groundwater silcrete in the shallow context of a groundwater system, generated at the vicinity of an erosional unconformity.
ISSN: 0191-8141

hal-01278286
https://hal.archives-ouvertes.fr/hal-01278286
DOI : 10.1016/j.jsg.2015.10.001

Éditeur(s) : Gauthier-Villars
Résumé : The wind, temperature and current data collected during the joined French-USA FOCAL/SEQUAL programme carried in the equatorial Atlantic band in 1983 and 1984, allowed for the first time a simultaneous study of both the equatorial and coastal (5-degrees-N) upwellings along 4-degrees-W. At the equator, the decreases of both the surface temperature and the depth of the thermocline in boreal summer are correlated with the zonal component of the local windstress in the period band 1-2 months. This corresponds to the time required by the thermocline to lift up at 0-4-degrees-W in the presence of an easterly wind. The local wind cannot however explain the entire vertical variability of the thermal structure at 0-4-degrees-W. The correlation function shows in addition that the temperature there is highly correlated to the wind recorded at St Peter and St Paul Rocks (SPP) in the period band 0-2 months. This time scale is the one required by the Kelvin and Rossby waves to propagate along the equator through equatorial wave guide dynamics. The influence of these waves seems particularly important when considering the upward displacements of the thermocline both in February-March when the winds abruptly relax and in November-December when the wind at 0-4-degrees-W is southwesterly with no secondary negative maximum in the wind record at 1-degrees-N-29-degrees-W (SPP), contrary to the climatological wind field. The computation of the different terms of the heat equation applied to an homogeneous surface layer shows that the cooling is entirely due to vertical advection and eddy diffusion. The cooling would be more effective without the atmospheric heat flux and the horizontal advection of heat transported both by the South Equatorial Current at the surface and the southward current at the bottom of the mixed layer. At the coast, the amplitude and duration of the upwellings are not constant all along the coast: in boreal summer, they are maximum east of the two capes (Palmas and Three Pointes) while in winter the strength of the cooling is maximum in the east of Cape Palmas and then decreases eastward. The meridional slope of the thermocline off the coast concerns a distance which is much larger than the internal Rossby radius of deformation and is coherent with the latitudinal extension and intensity of the Guinea current both in summer and winter. In addition to this geostrophic adjustment, the upward tilt of the thermocline in summer is enhanced by the intensification of the component of the wind parallel to the coast. The application of a simple linear model forced with an eastward wind at that time explains the surface maximum cooling at the coast and the current distribution in both vertical and meridional directions. The two maxima of the zonal component of the Guinea current, in summer (main one) and in winter are in phase with the intensity of the vertical component of the windcurl. The application of the Sverdrup equations shows that the current speeds computed, for both seasons, are of the same order of magnitude as the speeds observed.
Oceanologica Acta (0399-1784) (Gauthier-Villars), 1991 , Vol. 14 , N. 3 , P. 223-240

Droits : info:eu-repo/semantics/openAccess
http://archimer.ifremer.fr/doc/00101/21252/18865.pdf
http://archimer.ifremer.fr/doc/00101/21252/

Éditeur(s) : HAL CCSD
Résumé : International audience
Sub-continental lithospheric mantle rocks are exhumed at the foot of magma-poor distal passive margins as aresponse to extreme stretching of the continental crust during plate separation. Remnants of the Northern Iberianpaleo-passive margin are now exposed in the North-Pyrenean Zone (NPZ) and represent field analogues to studythe processes of continental crust thinning and subcontinental mantle exhumation. The NPZ results from theinversion of basins opened between the Iberia and Europa plates during Albo-Cenomanian times. In the westernNPZ, the ‘Chaînons Béarnais’ ranges display a fold-and-thrust structure involving the Mesozoic sedimentarycover, decoupled from its continental basement and associated with peridotite bodies in tectonic contact withPalaeozoic basement lenses of small size. Continental extension developed under hot thermal conditions, asdemonstrated by the syn-metamorphic Cretaceous ductile deformation affecting both the crustal basement and theallochthonous Mesozoic cover.In this study, we present structural and geochemical data providing constraints to reconstruct the evolution ofthe northern Iberia paleo-margin. Field work confirms that the pre-rift Mesozoic cover is intimately associatedto mantle rocks and to thin tectonic lenses of crustal basement. It also shows that the pre-rift cover was detachedfrom its bedrock at the Keuper evaporites level and was welded to mantle rocks during their exhumation atthe foot of the hyper-extended margin. The crust/mantle detachment fault is a major shear zone characterizedby anastomosed shear bands defining a plurimetric phacoidal fabric at the top of the serpentinized mantle. Thedetachment is marked by a layer of metasomatic rocks, locally 20 meters thick, made of talc-chlorite-pyrite-richrocks that developped under greenschist facies conditions. Raman Spectroscopy on Carbonaceous Materials(RSCM), performed on the Mesozoic cover reveal that the entire sedimentary pile underwent temperatures rangingbetween 200C and 480C.We show that: (i) at the site of mantle rocks exhumation, the boudinaged pre-rift sediments have undergone drasticsyn-metamorphic thinning with the genesis of a S0/S1 foliation and, (ii) the Paleozoic basement has been ductilelydeformed, into thin tectonic lenses that remained welded to the exhumed mantle rocks. Therefore the overallcrustal rheology appears dominated by shallow levels having a ductile behavior. This rheology is related to thepresence of a thick pre- and syn-rift decoupled cover acting as an efficient thermal blanket. This new geologicaldata set highlights important characteristics of ductile-type hyper-extended passive margin that cannot be obtainedfrom the study of seismic lines. Finally, we stress that studying field analogues represents a major tool to betterunderstand the mechanisms of extreme crustal thinning associated with mantle exhumation and their structuralinheritance during tectonic inversion.
Geophysical Research Abstracts
Vienne, Austria

insu-01510103
https://hal-insu.archives-ouvertes.fr/insu-01510103

Éditeur(s) : HAL CCSD
Résumé : International audience
The Achmmach tin mineralization (NE of theMoroccan Central Massif) is associated with tourmaline-richalteration halos, veins, and faults hosted in sandstones andmetapelites of the Upper Visean-Namurian. These depositsare reported to be late Hercynian in age and related to theemplacement of late-orogenic granite not outcropping in thestudied area. Structural and paragenetic studies of theAchmmach tin deposit were conducted in order to establisha general model of the mineralization. From field constraints,the late Hercynian phase is marked by a transition fromtranspression to extension with deformation conditions evolvingfrom ductile to brittle environments. The transpression(horizontal shortening direction roughly trending E-W) is coevalwith the emplacement of the first tourmaline halos alongseveral conjugated trends (N070, N020, and N120).Thereafter, a tourmaline-rich breccia formed in response tothe fracturing of early tourmaline-altered rocks.Subsequently, during the extensional phase, these structureswere reactivated as normal faults and breccias, allowing theformation of the main tin mineralization (cassiterite) associatedwith a wide variety of sulfides (arsenopyrite, chalcopyrite,sphalerite, galena, pyrrhotite, bismuthinite, pyrite, and stannite). This evolution ends with fluorite and carbonate deposition.The hydrothermal fluid flow velocity, calculated byapplying statistical measures on the tourmaline growth bands,varies with the lithology. Values are lower in metapelites andhigher in breccia. In the general evolution model proposedhere, tourmaline alteration makes the rock more competent,allowing for brittle fracturing and generation of open spacewhere the main Sn mineralization was precipitated.
Mineralium Deposita

insu-01240481
https://hal-insu.archives-ouvertes.fr/insu-01240481
DOI : 10.1007/s00126-015-0613-0