Éditeur(s) : HAL CCSD
Résumé : This work focus on the characterization of the source and dynamic of compactional fluids during sedimentary burial, through two complementary examples of late orogenic oil‐field half‐grabens: The exhumed Lodève Permian Basin and a deep buried Jurassic basin in the North Viking Graben (North Sea).Constituting the main part of the thesis, a multi‐disciplinary approach was conducted in the Lodève Basin where Ba‐F‐Cu‐Pb polymetallic mineralized systems are trapped into synrift faults and paleokarsts in the carbonate basement at the hinge point of the rollover. The source, timing and P/T conditions of fluid migration were deduced from the analysis of the microfabric, the fluid inclusions microthermometry, and the isotopic (Sr, S, O, H) and Rare Earth Element (REE) signature. Results are then crossed with a structural and thermal modeling that consolidates the sequence and dynamics of fluid during burial.A similar approach was conducted in the North Viking Graben where fluid markers are restricted to 3D seismic and well core data. Comparable Ba‐Pb‐Zn veins are reported in basin margin, plugging one of the most important siliciclastic hydrocarbon reservoir in the substratum. This analysis provides additional constraints on basinal fluid behavior and allows us to propose a global dynamic model for various compositions of fluids and reservoirs.We conclude to a polyphase fluid sequence history including:(a) In the carbonate basement of the Lodève Basin, karstic paleocanyon incisions and associated cavities coupled to synrift fault, act as major drain for fluids. These structures are early affected by hypogen‐sulfuric karstification in response to the interaction between bacterial oxidation of sulfides entrapped within Lower Permian blackshales and the basement oxidizing aquifer.(b) Disequilibrium compaction initiates overpressure‐driven basinal fluid migration towards basin margins, characterized by temperatures around 150‐180°C and salinities between 9 et 18wt%eq.NaCl. Isotopic (Sr, S, O) and REE analyses reveal that Ba‐M+‐rich mineralizing fluids derived mainly from buried blackshales diagenesis. External fluids coming from the lower crust are also identified that play a key role in fluorite precipitation by the leaching of late hercynian granites (mean temperature of 250°C and salinity > 20wt%eq.NaCl).(c) During the synrift period, fluid overpressure is responsible for the periodic reactivation of fault plane according to seismic‐valve process, bedded‐control shearing and hydraulic brecciation at the basement‐seal interface. These mechanisms induce cyclic polymetallic mineralization by the mixing between in‐situ formation water and deep ascending basinal fluids.(d) Thermogenic fluids expulsion starts with last basinal fluids during late burial stage. Hydrocarbons thus migrate along the same regional pathways up to the rollover crest, where they are partly rerouted by the previous mineralized baffle.(e) In the Lodève basin, post‐rift exhumation of the margins led to the remobilization of synrift deposits by subaerial biochemical processes at the sulfate‐methane transition. The latter results from the interaction between the still active hydrocarbon dysmigration with a playa lake sulfate‐rich aquifer. Secondary low‐temperature barite fronts precipitate then within basement meteoric karsts.In addition to the « source to sink » model of basinal fluids, this work provides new insights on the early plugging of hydrocarbon reservoirs and for the metallogenesis of Mississippi Valley‐Type deposits.
Ce travail porte sur la caractérisation de la source et de la dynamique des fluides de bassin au cours de leur chargement à travers deux exemples complémentaires de demi‐grabens tardi‐orogéniques pétroliers : Le Bassin Permien de Lodève, aujourd’hui à l’affleurement et un bassin jurassique enfouis dans le North Viking Graben (Mer du Nord).Le coeur de la thèse concerne le Bassin de Lodève où, à partir d’une approche pluridisciplinaire intégrée, nous avons caractérisé l’architecture des minéralisations (Ba, F, Cu, Pb) piégées dans un réseau paléokarstique alimenté par les failles syn‐rift, dans le substratum carbonaté à l’apex du roll‐over. La source, le calendrier et les conditions de migration des fluides ont été approchés à partir de l’analyse de la micro‐fabrique, la microthermométrie sur inclusions fluides, les analyses isotopiques (Sr, S, O, H) et de Terres Rares. Les résultats analytiques ont été enfin croisés avec un modèle thermique et structural du bassin qui conforte la séquence et la dynamique du système fluide en cours d’enfouissement.Une démarche similaire, mais plus limitée, a été conduite dans le bassin du North Viking Graben où l’accès aux marqueurs fluides est restreint aux données de sismique 3D et de carottes. Comme à Lodève, les minéralisations Ba‐Pb‐Zn colmatent un réservoir dans le substratum à l’apex du roll‐over. Elles se présentent sous forme de ciments dans des grès ou des fractures. Cette analyse apporte des contraintes complémentaires et permet de proposer un modèle dynamique général avec des variantes en fonction de la nature des fluides et des réservoirs.On retiendra donc la séquence fluide suivante :(a) Dans le cas du bassin de Lodève sur substratum carbonaté, les chemins préférentiels de drainage se développent dans des paléocanyons N‐S couplés à un réseau de fractures et d’endokarsts météoriques. Ces derniers sont élargis en début de rifting par la dissolution hypogène sulfurique produite par l’oxydation bactérienne des sulfates et des pyrites des blackshales, au contact de l’aquifère oxydant du Cambrien.(b) Le déséquilibre de compaction initie la migration des fluides interstitiels en surpression vers les marges avec des températures autour de 150‐180°C et des salinités entre 9 et 18wt%eq.NaCl. Les analyses isotopiques (Sr, S, O) révèlent que la majorité des fluides provient de l’altération diagénétique des blackshales riches en métaux. Des interactions sont également mises en évidence avec des fluides profonds (entre 240°C et 260°C ; salinités > à 20wt%eq.NaCl), qui lessivent les granites tardi‐hercyniens.(c) Pendant le syn‐rift, les conditions de surpression de fluide permettent la réactivation cyclique des failles, les décollements stratigraphiques et la formation de brèches hydrauliques, favorisant la mise en connexion avec les réservoirs superficiels à l’apex du rollover. Le modèle de Sibson ajusté aux fluides de bassins est alors le moteur de la migration verticale.(d) Les fluides thermogéniques commencent à être expulsés avec les derniers fluides de compaction au cours d’un stade plus évolué de l’enfouissement en empruntant les mêmes chemins jusqu’à l’apex du roll over. Ils sont alors partiellement freinés et déviés par les colmatages minéralisés antérieurs.(e) A Lodève, la continentalisation des minéralisations antérieures au cours de l’exhumation post‐rift conduit à leur remaniement partiel au niveau de la transition sulfate‐méthane induite par l’interaction entre une playa évaporitique et la dysmigration des hydrocarbures. Des barytines secondaires de basse température, déprimées en Sr sont alors précipitées de manière synsédimentaire dans des karsts météoriques du socle.Outre l’illustration d’un modèle complet (source to sink) de dynamique des fluides dans un bassin, ce travail apporte de nouvelles contraintes dans l’approche du colmatage des réservoirs à hydrocarbures sur les têtes de blocs basculés et sur la genèse des gîtes miniers de type Mississippi Valley‐Type.
https://hal.archives-ouvertes.fr/tel-01457583

tel-01457583
https://hal.archives-ouvertes.fr/tel-01457583
https://hal.archives-ouvertes.fr/tel-01457583/document
https://hal.archives-ouvertes.fr/tel-01457583/file/th%C3%A8seLaurent2015V2.pdf

Éditeur(s) : HAL CCSD Oxford University Press (OUP)
Résumé : International audience
The Taleghan fault (TF) is a major active fault of the Central Alborz mountain range in Iran. Located 50 km northwestwards of Tehran, this 80-km-long fault represents one of the major structures threatening 15 million people living in the capital of Iran and the surrounding cities (e.g. Karaj). The TF could be the source of some of the strongest historical earthquakes recorded in the Tehran region, notably the 958 AD event (estimated magnitude M 7.7). To characterize the kinematics and activity of the fault, we carried out a detailed morphological and palaeoseismological study combining aerial photographs, digital elevation models and fieldwork. We show that, unliked described so far, the TF is not a reverse fault but a left-lateral strike-slip fault with a normal component. Its strike, dip and rake within its eastern part are 105, 60 and -20/-40, respectively. Our palaeoseismological analysis shows that a sequence of 2-3 events with magnitudes M-w >= 7 occurred during the past 5300 years. If we consider a three-event scenario, the average recurrence interval is similar to 2000 years, and the most recent event is younger than 80 AD. If we consider a two-event scenario, the time interval between the second and the first events ranges between 3760 and 830 years, and the elapsed time since the last event ranges between 3529 and 1599 years. Combined with morphotectonics data, our palaeoseismological analysis allows estimating a minimum horizontal slip rate of 0.6-1.6 mm yr(-1) and a minimum vertical slip rate of similar to 0.5 mm yr(-1). Taking the similar to 450-m total vertical displacement observed across the fault, we conclude that the kinematical change along the TF (from reverse to left-lateral + normal) occurred similar to 1 Ma.
ISSN: 0956-540X

hal-00420896
https://hal.archives-ouvertes.fr/hal-00420896
https://hal.archives-ouvertes.fr/hal-00420896v2/document
https://hal.archives-ouvertes.fr/hal-00420896/file/narariGJI2009.pdf
DOI : 10.1111/j.1365-246X.2009.04173.x

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The In-Ezzane volcanic district (EZD), located at the triple junction of Algeria, Niger and Libya belongs to the Eastern Hoggar, covers 350 km2 and includes 9 volcanic edifices that are probably aligned along NW-SE faults, parallel to the Tafassasset valley. The low volume (0.7 and 1 km3) of emitted lavas, the similar morphology of the monogenic cones and the lack of differentiated rocks indicate that the volcanic activity of the EZD was restricted in time and volume. The new K-Ar age (i.e. 2.86 ± 0.07 Ma) indicates that the EZD is contemporaneous with the last alkali volcanism paroxysm in Hoggar and with the nearby Libyan volcanics. The EZD alkali basalts (mainly basanite) show a remarkable homogeneous compositions both in major elements (44.8 ⩽ SiO2 ⩽ 45.8 wt.%; 5.2 ⩽ (Na2O + K2O) ⩽ 6.2 wt.%), trace elements (4.3 ⩽ Th ⩽ 5.5 ppm; 34.7 ⩽ La ⩽ 44.7 ppm; 16.1 < La/Yb(N) < 21.6) and radiogenic isotopes (0.70285 < 87Sr/86Sr < 0.70303; 0.51298 < 143Nd/144Nd < 0.51301; (19.212 < 206Pb/204Pb < 19.340, 15.589 < 207Pb/204Pb < 15.602 and 38.834 < 208Pb/204Pb < 38.903). Relative to the Hoggar alkaly basalts the EZD basalts appear systematically impoverished in incompatible elements and show a depleted signature both in Sr and Nd isotopes (almost MORB-like). The Pb isotopes are relatively enriched and intermediate between tholeiites and alkali basalts of the Hoggar. This unusual geochemical signature, is uneasy to reconcile with the known characteristics of the Hoggar swell, and would rather fingerprint a circum cratonic mantle lying beneath the west border of the Murzuq craton (Libya).
ISSN: 0899-5362

hal-01054340
https://hal.archives-ouvertes.fr/hal-01054340
DOI : 10.1016/j.jafrearsci.2013.12.001

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The Gulf of Cadiz spans the plate boundary between Africa and Eurasia west of the Betic–Rif mountain belt. A narrow east dipping subduction zone descends beneath the Gulf of Cadiz and the straits of Gibraltar. The deep crustal structure of the Gulf and the adjacent SW Iberian and Moroccan margins is constrained by numerous multi-channel seismic reflection and wide-angle seismic surveys. A compilation of these existing studies is presented in the form of depth to basement, sediment thickness, depth to Moho and crustal thickness maps. These structural maps image an E–W trending trough, with thin (< 10 km) crust beneath the Gulf of Cadiz. This trough is filled by an eastward thickening wedge of sediments, reaching a thickness of 10–15 km in the eastern Gulf. These sediments are tectonically deformed, primarily along a series of westward-vergent thrust faults and represent a 200–250 km wide accretionary wedge. The northern and especially the southern limits of the accretionary wedge are marked by sharp morphological lineaments showing evidence of recent deformation. These tectonic limits are situated in an internal position with respect to the Miocene deformation front (external Betic and Rif allocthons), which has been abandoned. At the western boundary of the accretionary wedge, near the adjacent Seine and Horseshoe abyssal plains, an E–W trending basement high (Coral Patch Ridge) can be seen indenting the deformation front in an asymmetric manner. Analog modeling is performed using granular materials accreted against a semicircular backstop (representing the basement of the Rif and Betic mountain belts). The modeling initially produces a symmetric, arcuate accretionary wedge. The ensuing collision of an oblique rigid indenter retards accretion on one side, resulting in an embayment and a locally steeper deformation front. The deformation pattern observed in morphology and high-resolution seismic profiles suggests the accretionary wedge and underlying subduction system is still active. The implications of active subduction for the source region of the 1755 Lisbon earthquake and the regional seismic hazard assessment are discussed.
ISSN: 0040-1951

hal-00424922
http://hal.univ-brest.fr/hal-00424922
http://hal.univ-brest.fr/hal-00424922/document
http://hal.univ-brest.fr/hal-00424922/file/Gutscher_09Tphys_rev.pdf
DOI : 10.1016/j.tecto.2008.11.031

Éditeur(s) : HAL CCSD
Résumé : This work addresses a study of geodynamics in Armenia, a country located in the central part of the zone of continental collision between the Arabian and Eurasian lithosphere plates. The work includes two main parts: study of recent deformations of the lithosphere by means of GPS and detailed paleoseismological and morphometric investigations in the zone of the Artanish-Tskhouk segment of the PSSF. We analyze and compare rates of deformation determined by the GPS data and the rates estimated by the paleoseismological and morphometric studies. The Armenian-French network of GPS observations was installed in Armenia in 1998. Three observation sessions were conducted in 1998, 2000 and 2003. Based on the evidence obtained, a detailed study of the velocity field was conducted to analyze lithosphere deformation in Central and Northern Armenia. Slip rates were estimated for the principal active faults in Armenia. Several field works, including paleoseismological, archaeo-seismological, archaeological, geodetic and morphological studies, had been implemented in the zone of the Artanish-Tskhouk segment of the PSSF in 2003-2005. The fault was mapped in detail; rates of main horizontal and vertical slip along the fault were estimated and re-estimated. Four (4) paleo- and archeo-earthquakes were studied and dated. Eventually, the obtained data allowed us to re-estimate slip rates, maximum possible magnitudes and recurrence intervals of strong earthquakes on the Artanish-Tskhouk segment of the PSSF. A technique enabling estimation of horizontal and vertical displacements along strike-slip faults during paleo-earthquakes by the evidence obtained from paleo-seismological trenching was developed.
Les travaux présentés dans ce mémoire sont consacrés à l'étude de la géodynamique du territoire de l'Arménie qui est situé dans la partie centrale de la zone de collision continentale entre les plaques Arabique et Eurasienne. Le mémoire comprend deux parties principales: 1/ l'étude des déformations actuelles par la géodésie GPS; 2/ l'étude paléosismologique et morphométrique détaillée de la zone du segment d'Artanish-Tskhuk de la faille de Pambak-Sevan-Syunik (PSSF). On présente l'analyse et la comparaison des vitesses de déformations estimées par les données de GPS et par les données paléosismologiques et morphométriques. Le réseau d'observations GPS Arméno - Français a été installé en Arménie en septembre 1998. Trois campagnes de mesure du réseau ont été réalisées en 1998, 2000 et 2003. L'analyse détaillée du champ de vitesse à partir des données GPS a permis d'étudier et de quantifier les déformations actuelles de l'Arménie centrale et septentrionale. On a pu estimer les vitesses des déplacements des failles actives principales du territoire de l'Arménie. Un ensemble de travaux sur le terrain comprenant des recherches paléosismologiques, archéosismologiques, archéologiques, géodésiques, et morphologiques a été réalisé entre 2003 et 2005 dans la zone du segment d'Artanish-Tskhuk de la faille de PSSF. La cartographie détaillée de la faille a été réalisée et l'on a estimé et/ou re-estimés les déplacements horizontaux et verticaux le long de la faille. Quatre paléo- et archéoséismes ont été étudiés et datés. À partir des données obtenues, pour le segment d'Artanish-Tskhuk de la faille de PSSF, on a réévalué les vitesses de déplacements, la magnitude maximale possible, et l'intervalle récurrence des séismes forts. Une méthode d'évaluation des déplacements horizontaux et verticaux a été proposée à partir des logs de tranchées sur les failles de décrochements associées à des paléoséismes.
https://tel.archives-ouvertes.fr/tel-00551535

Droits : info:eu-repo/semantics/OpenAccess
tel-00551535
https://tel.archives-ouvertes.fr/tel-00551535
https://tel.archives-ouvertes.fr/tel-00551535/document
https://tel.archives-ouvertes.fr/tel-00551535/file/thesedavtyan2.pdf

Éditeur(s) : HAL CCSD
Résumé : This work provides new constraints on the development and on the distribution of the deformation in the upper mantle and particularly beneath transform plate boundaries. USArray experiment and the remarkable increase of the dataset in California for the past ten years allowed us to scrutinize the lateral variations of the anisotropy in the vicinity of the San Andreas Fault zone. We have confirmed and increased the detection of two layers of anisotropy beneath this plate boundary. The first layer, located in the lithosphere, is related to the deformation induced at the fault, and the other one, located in the asthenosphere, is coherent with the anisotropy observed far from it, its origin is however less clear. We show that the deformation zone associated both to the San Andreas, Calaveras and Hayward Faults, is likely 40 km wide at 70 km depth. We then performed numerical thermomechanical modeling (ADELI) of the displacement of a transform plate boundary associated with the computation of the development of crystallographic fabrics using a viscoplastic selfconsistent approach (VPSC). We analyzed the distribution of the deformation in the model ant looked after the possible interactions at depth between deformation caused at surface by the strike-slip dynamic of the fault and the shearing at the base of the lithosphere caused by the horizontal displacement of the plates. Elastic properties derived from the crystallographic fabrics modeled, show that such interactions exist and induce, beneath the fault zone, a progressive rotation of the crystallographic fabrics with depth. Seismological signature of these smooth rotations is however not relevant with the presence of two anisotropic layers as proposed beneath California. We thus consider that a decoupling zone exists between the lithosphere and the asthenosphere beneath the California to account for the sharp separation between a lithospheric and an asthenospheric deformation. We furthermore estimate that anisotropy observed far form the San Andreas Fault in California cannot be explained only by the drag of the asthenosphere by the North America lithosphere as proposed in our article. Indeed, we can only expect few tenths of second of splitting delay from the anisotropic properties derived from the numerical modeling of a plate moving in the same direction and in the same velocity than the North American lithosphere only for 10 Ma of displacement. As delays observed in California rather reach 1.5 s, anisotropy in this region thus requires the existence of an active asthenospheric flow to be explained.
Le travail réalisé pendant cette thèse a permis d'apporter de nouvelles contraintes sur le développement et la distribution de la déformation dans le manteau supérieur et plus particulièrement au niveau des grandes limites de plaques décrochantes. Grâce à l'apport de l'expérience USArray et d'une dizaine d'années d'enregistrements sismologiques supplémentaires, nous avons pu étudier, de manière précise, les variations d'anisotropie dans le voisinage de la Faille de San Andreas. Nous avons confirmé et étendu l'observation de deux couches anisotropes sous cette limite de plaque. On y observe une première couche localisée dans la lithosphère marquant la déformation induite à la limite de plaque, et une autre, asthénosphérique, cohérente avec l'anisotropie observée loin de la faille et d'origine plus discutée. Nous avons montré que la zone de déformation associée aux failles de San Andreas, Calaveras et d'Hayward a, vraisemblablement, une largeur d'au moins 40 kilomètres en base de lithosphère, sous chacune de ces failles. Nous avons ensuite procédé à la modélisation thermomécanique (ADELI) de la migration d'une limite de plaques décrochante couplée à une modélisation du développement de fabriques cristallographiques par une approche viscoplastique auto-cohérente (VPSC). Ceci nous a permis d'y observer le développement de la déformation et les conséquences des possibles interactions entre la déformation décrochante en surface et le cisaillement en base de lithosphère dû au déplacement horizontal des plaques. Les propriétés élastiques déduites des fabriques cristallographiques modélisées montrent que de telles interactions existent et provoquent, sous la limite de plaques, une rotation des orientations cristallographiques avec la profondeur. Le signal associé à ces rotations progressives n'est toutefois pas cohérent avec la présence de deux couches d'anisotropie comme proposée sous la faille de San Andreas. Nous pensons par conséquent qu'il existe, sous la Californie, une zone de découplage entre la lithosphère et l'asthénosphère, permettant d'individualiser une déformation lithosphérique d'une déformation asthénosphérique. Nous estimons, en outre, que l'anisotropie observée dans l'asthénosphère sous la Californie ne peut être expliquée seulement par le cisaillement induit par le déplacement de la lithosphère Nord Amérique. En effet, les propriétés anisotropes obtenues par modélisation à partir d'une plaque se déplaçant dans une direction et une vitesse proche de celle de la plaque Amérique du Nord montrent qu'on ne peut espérer guère plus que quelques dixièmes de seconde de délai au bout de 10 Ma de déplacement. Les déphasages mesurés en Californie étant de l'ordre de 1,5 s, il est donc nécessaire d'invoquer la présence d'écoulements mantelliques actifs sous cette région.
https://tel.archives-ouvertes.fr/tel-00767124

tel-00767124
https://tel.archives-ouvertes.fr/tel-00767124
https://tel.archives-ouvertes.fr/tel-00767124/document
https://tel.archives-ouvertes.fr/tel-00767124/file/theseBonnin.pdf

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
The 856 A.D. Qumis earthquake (M7.9) is the most destructive earthquake to have occurred in Iran, killing more than 200,000 people and destroying the cities of Damghan and the old Parthian capital of Shahr-i Qumis (Hecatompylos). This study combines evidence of historical seismicity with observations of the geomorphology and paleoseismology to provide the first detailed description of active faulting in the Damghan region of the east Alborz mountains, Iran. Regional left-lateral shear is accommodated on the Astaneh, Damghan, and North Damghan faults. Quaternary alluvial fans have been displaced along the Astaneh fault, with 15–20 m stream offsets recording the cumulative displacement over the last two to five earthquakes. A paleoseismology study from a single trench along a 5–10 km segment of the Astaneh fault reveals a rupture prior to 1300 A.D. and significantly later than 600 B.C. Despite the limitations of a single trench in documenting the spatial and temporal evolution of the fault over the late Quaternary, we are nevertheless able to bracket the last event to a time period consistent with the 856 A.D. earthquake. Two older earthquakes were also identified during the Holocene occurring between 600 B.C. and 4600 B.C. and between 4600 B.C. and 9600 B.C. The location of our trench within a bend on the Astaneh fault, which could act as a barrier to rupture propagation, means the three earthquakes recovered from our trench over the Holocene may represent a minimum. Further trenching will reveal how the Astaneh fault ruptures over repeated earthquakes and, consequently, the magnitude and extent of slip during the 856 A.D. earthquake.
ISSN: 0148-0227

hal-00551330
https://hal.archives-ouvertes.fr/hal-00551330
https://hal.archives-ouvertes.fr/hal-00551330v2/document
https://hal.archives-ouvertes.fr/hal-00551330/file/Hollingsworth2010.pdf
DOI : 10.1029/2009JB007185

Éditeur(s) : HAL CCSD American Geophysical Union (AGU)
Résumé : International audience
[1] This article presents (U-Th)/He thermochronological data from the Longmen Shan belt, eastern Tibet. Located between the Songpan-Garze terrane and the Yangtze craton, this mountain range is one of the steepest margins of the Tibetan Plateau and an important area for the comprehension of the mechanisms that control the dynamics of such plateau borders in terms of spatial distribution of deformation or timing of topographic building. We describe several age-elevation transects and perform forward modeling of our data to derive quantitative information on the exhumation of the range. A major phase of exhumation started at 8–11 Ma, with an average rate of $0.65 mm a À1. Comparison of zircon and apatite ages indicates that the eastern part of the range may have experienced a significant decrease in exhumation since 2–3 Ma. We use the distribution of finite exhumation across the major faults of the area to quantify their dip-slip throw rate over the last 10 Ma. The Beichuan Fault, which was activated during the 2008 Sichuan earthquake, is the major active structure of the Longmen Shan since the late Miocene, with an average thrusting slip rate between 0.4 and 1 mm a À1. Conversely, over the same time period, only minor dip-slip activity occurred on the Wenchuan Fault Zone. This distribution in space and time of exhumation and deformation is discussed and compared to the different proposed models for the geodynamical evolution of the eastern Tibetan margin. It also provides an important long-term perspective to put in context the destructive 2008 Sichuan earthquake that struck the central Longmen Shan.
ISSN: 0278-7407

hal-01577059
https://hal-amu.archives-ouvertes.fr/hal-01577059
https://hal-amu.archives-ouvertes.fr/hal-01577059/document
https://hal-amu.archives-ouvertes.fr/hal-01577059/file/godard2009late.pdf
DOI : 10.1029/2008TC002407

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The Cycladic Blueschist Unit (CBU) represents the northern passive margin of the Adria continental block and ophiolites that are the remnants of the Pindos Ocean, which were affected by high pressure-low temperature metamorphism in the blueschist and eclogite facies during the Eocene. Prior to the Lutetian, the ophiolitic and margin units were thrust towards the SW inside a NE-dipping subduction zone. Two subsequent exhumation stages are characterized by top-to-the-NE senses of shear: i) from mantle depths to lower crustal levels, before 37 Ma, which was accommodated by an extensional inversion of the Vardar suture zone, and ii) from deep crustal levels to the near-surface, between 30 and 20 Ma, which was accommodated by the North Cycladic Detachment. It is during this late stage of ductile exhumation that the central Cyclades Core Complex was exhumed. Segmentation of the CBU by normal faults started at 12 Ma, as recorded by the low temperature thermochronometers, and was coeval with block rotation and folding with NS-trending axes, which were predominantly controlled by the Myrthes-Ikaria strike-slip fault in the centre of the Cyclades. A map restoration of the CBU geometry, prior to segmentation, has been carried out using available structural and paleomagnetic data. The restoration shows that, following the CBU exhumation from mantle depths to crustal levels, a single core complex was exhumed along a single NE dipping detachment.
ISSN: 0040-1951

insu-00672320
https://hal-insu.archives-ouvertes.fr/insu-00672320
DOI : 10.1016/j.tecto.2011.12.025

Éditeur(s) : HAL CCSD
Résumé : Today, one of the main challenges in the oil industry is the exploitation of new resources in naturally fractured reservoirs often located in structurally complex areas such as plate boundaries, mountain ranges or near salt structures. While numerical models of rock deformation based on continuum mechanics are becoming industry standard in providing efficient means for modelling natural fractures in reservoirs, the knowledge of past perturbed stress fields, which is referred as the type (normal, wrench or reverse), orientation and magnitude of the regional or local tectonic stresses that needs to be applied as boundary condition in numerical simulations, is often unknown or approximated.The essence of this thesis is to improve the recovery of the paleostress field needed to constrain numerical simulations. I first described and discuss through a comprehensive mechanically-based multi-parametric study how far we can rely on the commonly used paleostress inversion methods based on fault slip data and the Wallace and Bott assumptions. I then compared this method with a new generation technique based on geomechanics using field observations. Since slip markers on faults are hardly observed in core or image log, I used observed natural fracture data as main drivers for the inversion of the paleostress using geomechanically-based method. I demonstrated, through various outcrop and subsurface examples, how this can efficiently be done. Finally, I aimed at addressing the problem of polyphase fracture data sets with unknown mechanical type (joints, faults, stylolites ...) and expanded the mechanical stress inversion to the separation of tectonic phases.
Aujourd'hui, l'un des principaux défis dans l'industrie pétrolière est l'exploitation de nouvelles ressources dans les réservoirs naturellement fracturés souvent situés dans des zones structurellement complexes tels que les frontières de plaques, les chaînes de montagnes ou les structures de proches des dômes de sel. Alors que les modèles numériques de déformation des roches basée sur la mécanique des milieux continus fournissant des moyens efficaces pour la modélisation de fractures naturelles dans les réservoirs, sont devenus la norme dans l'industrie, les paléo-contraintes régionales ou locales appliquées comme condition aux limites dans les simulations numériques, définies par le régime (normal, décrochant ou inverse), l'orientation, et la magnitude des contraintes tectoniques, sont souvent inconnues ou approximées.L'essence de cette thèse est d'améliorer la prédiction du champ de paléo-contrainte nécessaire pour contraindre les simulations numériques. J’ai décrit dans un premier temps à travers une étude comparative multi-paramétrique complète basée sur la mécanique, dans quelle mesure nous pouvions compter sur les méthodes d'inversion des paléo-contraintes basées sur les hypothèses de Wallace et Bott et les données de glissement sur les failles. J’ai ensuite comparé ces méthodes avec une technique d’inversion de nouvelle génération basée sur la géomécanique en utilisant les observations de terrain. Puisque les marqueurs de glissement sur les failles sont rarement observés le long du forage, j’ai utilisé l’inversion géomécanique des contraintes pour les données de fractures naturelles observées. J’ai alors démontré, l’efficacité de cette technique à travers divers exemples d'affleurements et de subsurface. Enfin, j’ai proposé une solution afin de résoudre le problème des données de fractures polyphasées à type cinématique inconnu (joints, failles, stylolites ...) et étendu l’inversion de contrainte basée sur la géomécanique à la séparation des phases tectoniques.
https://hal.archives-ouvertes.fr/tel-01324110

tel-01324110
https://hal.archives-ouvertes.fr/tel-01324110
https://hal.archives-ouvertes.fr/tel-01324110/document
https://hal.archives-ouvertes.fr/tel-01324110/file/theselejri.pdf

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
While vertical motion induced by long-term geological loads is often used to estimate the flexural rigidity of the lithosphere, we intend to evaluate the shear rigidity of the lithosphere using horizontal motion. Our approach considers that the rigidity of the lithosphere may be defined as its resistance to horizontal tectonic lateral forces. In this case, a spatial distribution of an effective shear rigidity can be estimated from the analysis of the interseismic velocity fields. We consider the Western United States zone where weakly strained areas (e.g., the Sierra Nevada) are connected with areas of large strain rate (e.g. San Andreas Fault system). By inverting interseismic strain distribution measured by geodetic methods, we infer the effective shear rigidity of the lithosphere. The forward problem is defined using the equations of linear elasticity. The inversion relies on the minimization of the sum of a quadratic measure of the differences between measured and modelled velocity fields. The functional also includes regularization terms for the parameters of the model. The gradient of the functional with respect to the minimization parameters is computed using an adjoint formulation. This permits the treatment of large dimensional minimization problems. Finally, a measure of the uncertainty of our inversion is illustrated through the covariance matrix of the parameters at the optimum. The optimization chart is validated on two synthetic velocity distributions. Then, the effective shear rigidity variations of the Western United States are estimated using the CMM3 interseismic velocities. The inversion displays low effective rigidities along the San Andreas Fault system, the Mojave Desert and in the Eastern California Shear Zone, while rigid areas are found in the Sierra Nevada and in the South Basin and Range. Finally, we discuss the differences between our strain rate and rigidity maps with previously published results for the Western United States.
ISSN: 0040-1951

Droits : http://hal.archives-ouvertes.fr/licences/copyright/
hal-01505024
https://hal.archives-ouvertes.fr/hal-01505024
https://hal.archives-ouvertes.fr/hal-01505024/document
https://hal.archives-ouvertes.fr/hal-01505024/file/Paper_tectophysics.pdf
DOI : 10.1016/j.tecto.2017.03.015

Éditeur(s) : HAL CCSD Geological Society of London
Résumé : International audience
In Eastern China, the North China Block (NCB) has experienced a complex tectonic evolution during Late Palaeozoic to Mesozoic times. The unconformable sedimentary cover, which ranges in age from Neoproterozoic to Permian, underwent two tectonic episodes in Early Triassic and Cretaceous times. An early north–south compressional phase, D1, characterized by north-verging recumbent folds with east–west-trending axes and top-to-the-north ductile shear zones can be observed in a gabbroic pluton and the Neoproterozoic sedimentary host rocks. The available radiometric ages allow us to interpret this event as an Early Triassic back-thrusting related to the final stage of the collision between the North China and South China Blocks. During the LateMesozoic, an extensional event characterized by (1) half-grabens filled by continental terrigeneous red beds and lava flows, (2) low-angle detachment faults, (3) synkinematic granitic plutons, and (4) metamorphic core complexes is widespread in the Eastern Liaoning Peninsula. This extensional D2 event can be subdivided into a ductile deformation and a brittle deformation, corresponding to different expressions of crustal deformation. In every area studied in the Eastern Liaoning Peninsula, the ductile D2 deformation is characterized by a NW–SE-trending stretching lineation with a top-to-the-NWsense of shear.Mica and amphibole fromthe metamorphic country rocks, granodioritic or monzogranitic plutons and their mylonitized margins yield 40Ar/39Ar ages ranging from 130 to 120 Ma. These dates support fast cooling and exhumation rates coeval with the extensional tectonics. The brittle D2 deformation is responsible for the formation of high-angle normal faults marked by low-temperature cataclasites bounding half-grabens. During the Mesozoic, the tectonic regime of Eastern China experienced a significant inversion from compression to extension. The Eastern Liaoning Peninsula massif provides an example of this geodynamic transition.
ISSN: 2041-4927

hal-00134055
https://hal-insu.archives-ouvertes.fr/hal-00134055
DOI : 10.1144/SP280.7

Éditeur(s) : HAL CCSD Blackwell Publishing
Résumé : International audience
In the Causses platform (south-east France), Late Hettangian to Sinemurian deposits were interpreted previously as shallow-water carbonate ramp deposits. A new look at these deposits has shown a fault-controlled mosaic carbonate platform that is different from the carbonate ramp models. Within the platform mosaic, 15 lithofacies have been recognized, which are organized in four facies associations, including peritidal, restricted shallow sub-tidal, sand dunes and sub-tidal shelf facies associations. The rapid lateral and vertical facies changes, and the lack of consistent landward or seaward direction indicated by the pattern of facies changes, question the existence of a shoreline suggested by the traditional models for this region. Instead, the facies organization and cycle stacking pattern suggest deposition in a mosaic of intertidal islands between which sub-tidal restricted or open conditions could coexist in very close proximity. Such a platform mosaic would have been defined by tectonic activities along normal faults which segmented the shallow-water Causses platform. The facies and facies associations are arranged into metre-scale, peritidal and sub-tidal cycles that are also variable. Certain cycles show the same stacking pattern in all the sections and seem to be traceable over tens of kilometres. On the contrary, other cycles cannot be correlated; they are present only in specific sections and have a maximum lateral extension of 1 or 2 km. These metre-scale cycles stack to form four medium-scale cycles bounded by surfaces that display sub-aerial exposure features. Medium-scale cycles stack into two larger-scale cycles (tens of metres thick) and are bounded by well-defined karstic surfaces. Based on their lateral continuity and their stacking pattern, the metre-scale cycles are controlled probably by high frequency eustatic variations overprinting the topographic irregularities formed by differential subsidence of fault-bounded blocks. Episodic fault activities may reorganize the topography so that, even if eustatic changes may still be the major control of cycles, the expression and number of cycles could be different. Cycles of medium and large-scale are interpreted as being allogenic, controlled by changes in eustasy and/or subsidence rates as evidenced by their lateral continuity and the correlations of the large-scale cycles with third-order depositional sequences.
ISSN: 1469-3496

hal-00411940
https://hal.archives-ouvertes.fr/hal-00411940
DOI : 10.1111/j.1365-3091.2007.00896.x

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The South Liaodong Peninsula massif is the easternmost Mesozoic Metamorphic Core Complex, recognized in Eastern China. It provides a good example of the combination of ductile shearing, synkinematic plutonism and polyphase exhumation. The Jurassic granodioritic plutons, located at the footwall of the detachment normal fault, and dated here at ca 160 Ma, recorded two different phases of cooling. A slow cooling regime of about 3-10°C/my prevailing before 122 Ma, was followed by a significant increase in cooling rate of about 40-55°C/my after that time. By contrast, a single fast cooling path was recorded by the Cretaceous monzogranite situated in the footwall of the detachment normal fault. This result indicates that the Jurassic and Cretaceous plutons recorded different exhumation processes: a Jurassic slow or negligible exhumation and a Cretaceous fast one assisted by normal faulting. These two cooling stages correspond to distinct geodynamic processes during the Jurassic and Cretaceous. Extensional tectonics seems not significant before Early Cretaceous. The second stage, dominated by an extensional regime which develops after ca 120 Ma, is tentatively correlated to the lithosphere removal of the North China Craton.
ISSN: 1367-9120

Droits : http://creativecommons.org/licenses/by-nc-nd/
insu-00528171
https://hal-insu.archives-ouvertes.fr/insu-00528171
https://hal-insu.archives-ouvertes.fr/insu-00528171/document
https://hal-insu.archives-ouvertes.fr/insu-00528171/file/Lin-JAsianEarthSciences-2010.pdf
DOI : 10.1016/j.jseaes.2010.09.007

Éditeur(s) : HAL CCSD Oxford University Press (OUP): Policy P - Oxford Open Option A Oxford University Press (OUP)
Résumé : International audience
The Pyrenean mountain range is a slowly deforming belt with continuous and moderate seismic activity. To quantify its deformation field, we present the velocity field estimated from a GPS survey of the Pyrenees spanning 18 yr. The PotSis and ResPyr networks, including a total of 85 GPS sites, were installed and first measured in 1992 and 1995–1997, respectively, and remeasured in 2008 and 2010. We obtain a deformation field with velocities less than 1 mm yr−1 across the range. The estimated velocities for individual stations do not differ significantly from zero with 95 per cent confidence. Even so, we estimate a maximum extensional horizontal strain rate of 2.0 ± 1.7 nanostrain per year in a N–S direction in the western part of the range. We do not interpret the vertical displacements due to their large uncertainties. In order to compare the horizontal strain rates with the seismic activity, we analyse a set of 194 focal mechanisms using three methods: (i) the ‘r’ factor relating their P and T axes, (ii) the stress tensors obtained by fault slip inversion and (iii) the strain-rate tensors. Stress and strain-rate tensors are estimated for: (i) the whole data set, (ii) the eastern and western parts of the range separately, and (iii) eight zones, which are defined based on the seismicity and the tectonic patterns of the Pyrenees. Each of these analyses reveals a lateral variation of the deformation style from compression and extension in the east to extension and strike-slip in the west of the range. Although the horizontal components of the strain-rate tensors estimated from the seismic data are slightly smaller in magnitude than those computed from the GPS velocity field, they are consistent within the 2σ uncertainties. Furthermore, the orientations of their principal axes agree with the mapped active faults.
ISSN: 0956-540X

hal-01171752
https://hal.archives-ouvertes.fr/hal-01171752
DOI : 10.1093/gji/ggv052

Éditeur(s) : HAL CCSD
Résumé : The Firouzkuh Fault in most of its extension is located at the southern side of Firouzkuh Valley in west of the Central Alborz. It is a SW - NE prominent structure with a 70 km long on a sinistral -normal fault. It has been known as a south-dipping reverse fault.Paleoseismic analysis and C14 dating along the Firouzkuh left -lateral strike-slip fault indicate that Central Alborz has been shaken by large earthquakes during the Holocene. Here we present the data carried out of one of the two excavated trenches with 15 m long, 2m wide, ~ 4m deep in the east of Firouzkuh, where we found some evidence for last paleoearthquake associated to seismic re-activity on Firouzkuh Fault in the second trench (F2) that dug across a gauge zone. The last event is evidenced by cutting young superficial deposit where this faulted unit stratigrafically covered alluvium deposits yielded dated human bones fragments. The bones found in 60-70cm-deep of trench which a C14 age of 1159 ± 28 BP. Regarding to estimated slips per event on paleoseismological log of eastern wall of trench F1, event magnitudes for each paleoearthquakes are M≈7.
Geosciences Scientific Quarterly Journal

hal-00800375
https://hal.archives-ouvertes.fr/hal-00800375

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
We present evidence that GPS velocity estimates of plate motions and fault slip rates agree to within uncertainties with geologic estimates during the most recent phase of the geologic evolution of the E Mediterranean region (post-Late Miocene). On this basis, we use the GPS differential velocities to estimate the timing of initiation of the principal structures in NW Turkey, the N Aegean Sea, and central Greece, including, the Marmara Sea, the Gulfs of Evia (GoE) and Corinth (GoC). and the Kephalonia Transform fault (KTF). We interpret these ages to indicate that the North Anatolian fault propagated across the N Aegean, opening the GoE and GoC and initiating the KTF, during the past 1-4 Ma. We further suggest that Aegean extension that was earlier more distributed across the Aegean Basin became focused on this new fault system allowing the southern Aegean and Peloponnisos to translate SW with little internal deformation, as observed today with GPS. This change in tectonic configuration may account for the clear geologic evidence for crustal thinning throughout the S Aegean in apparent contradiction with low present-day strain rates. We further show that the low present-day strain rate along the southern edge of the Aegean micro-plate requires substantial aseismic slip along the plate interface below Crete, consistent with the low level of historic, subduction-type earthquakes along this segment of the subduction zone.
ISSN: 0040-1951

hal-00512634
https://hal.archives-ouvertes.fr/hal-00512634
DOI : 10.1016/j.tecto.2009.05.027

Éditeur(s) : HAL CCSD Oxford University Press (OUP)
Résumé : International audience
We analyse P-wave receiver functions across the western Gulf of Aden and southern Red Sea continental margins in Western Yemen to constrain crustal thickness, internal crustal structure and the bulk seismic velocity characteristics in order to address the role of magmatism, faulting and mechanical crustal thinning during continental breakup. We analyse teleseismic data from 21 stations forming the temporary Young Conjugate Margins Laboratory (YOCMAL) network together with GFZ and Yemeni permanent stations. Analysis of computed receiver functions shows that (1) the thickness of unextended crust on the Yemen plateau is ∼35km; (2) this thins to ∼22km in coastal areas and reaches less than 14km on the Red Sea coast, where presence of a high-velocity lower crust is evident. The average Vp/Vs ratio for the western Yemen Plateau is 1.79, increasing to ∼1.92 near the Red Sea coast and decreasing to 1.68 for those stations located on or near the granitic rocks. Thinning of the crust, and by inference extension, occurs over a ∼130-km-wide transition zone from the Red Sea and Gulf of Aden coasts to the edges of the Yemen plateau. Thinning of continental crust is particularly localized in a <30-km-wide zone near the coastline, spatially co-incident with addition of magmatic underplate to the lower crust, above which on the surface we observe the presence of seaward dipping reflectors (SDRs) and thickened Oligo-Miocene syn-rift basaltic flows. Our results strongly suggest the presence of high-velocity mafic intrusions in the lower crust, which are likely either synrift magmatic intrusion into continental lower crust or alternatively depleted upper mantle underplated to the base of the crust during the eruption of the SDRs. Our results also point towards a regional breakup history in which the onset of rifting was synchronous along the western Gulf of Aden and southern Red Sea volcanic margins followed by a second phase of extension along the Red Sea margin.
ISSN: 0956-540X

hal-00825194
https://hal.archives-ouvertes.fr/hal-00825194
https://hal.archives-ouvertes.fr/hal-00825194/document
https://hal.archives-ouvertes.fr/hal-00825194/file/RF_Hakim2012_GJI.pdf
DOI : 10.1093/gji/ggt072

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
We review the geodynamic evolution of the Aegea-Anatolia region and discuss strain localisation there over geological times. From Late Eocene to Present, crustal deformation in the Aegean backarc has localised progressively during slab retreat. Extension started with the formation of the Rhodope Metamorphic Core Complex (Eocene) and migrated to the Cyclades and the northern Menderes massif (Oligocene and Miocene), accommodated by crustal-scale detachments and a first series of core complexes (MCCs). Extension then localised in Western Turkey, the Corinth Rift and the external Hellenic arc after Messinian times, while the North Anatolian Fault penetrated the Aegean Sea. Through time the direction and style of extension have not changed significantly except in terms of localisation. The contributions of progressive slab retreat and tearing, basal drag, extrusion tectonics and tectonic inheritance are discussed and we favour a model (1) where slab retreat is the main driving engine, (2) successive slab tearing episodes are the main causes of this stepwise strain localisation and (3) the inherited heterogeneity of the crust is a major factor for localising detachments. The continental crust has an inherited strong heterogeneity and crustal-scale contacts such as major thrust planes act as weak zones or as zones of contrast of resistance and viscosity that can localise later deformation. The dynamics of slabs at depth and the asthenospheric flow due to slab retreat also have influence strain localisation in the upper plate. Successive slab ruptures from the Middle Miocene to the Late Miocene have isolated a narrow stripe of lithosphere, still attached to the African lithosphere below Crete. The formation of the North Anatolian Fault is partly a consequence of this evolution. The extrusion of Anatolia and the Aegean extension are partly driven from below (asthenospheric flow) and from above (extrusion of a lid of rigid crust).
ISSN: 0040-1951

insu-00715950
https://hal-insu.archives-ouvertes.fr/insu-00715950
https://hal-insu.archives-ouvertes.fr/insu-00715950/document
https://hal-insu.archives-ouvertes.fr/insu-00715950/file/Jolivet-Aegean_Tectonophysics-2012.pdf
DOI : 10.1016/j.tecto.2012.06.011

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
Phyllosilicate content and related permeability of fault zones form primary controls on hydraulic and mechanical behavior of the brittle crust. Hence, understanding and predicting the localization of these ubiquitous minerals is a major issue for fundamental and applied geosciences. We describe normal fault zones cutting a foreland arkosic turbiditic formation suffering high-T diagenesis and formed under conditions (~200°C) typical of deeply buried reservoirs and common within the seismogenic interval. Microstructural analyses show a large proportion of phyllosilicates (up to 34%) in the fault rock, derived from near-complete feldspar alteration and disaggregation during deformation. This study shows that even faults with offsets (~20 cm) much lower than bed thickness can have such large feldspar-to-phyllosilicate transformation ratios, implying that the origin of the phyllosilicates is purely transformation related. These results imply that the potential sealing capacity and strength of faults could be predicted from the host rock feldspar content. Where sealing capacity and fault strength can be related to phyllosilicate content, these properties can then also be inferred from the predicted phyllosilicate content: this opens up new horizons concerning the hydraulic and the mechanical behavior of the upper crust.
ISSN: 0094-8276

hal-00903574
https://hal.archives-ouvertes.fr/hal-00903574
DOI : 10.1002/grl.50829