Éditeur(s) : HAL CCSD European Geosciences Union
Résumé : We propose to assess the error done when temperature is considered as a conservative tracer in fluviokarst studies. As a matter of fact, heat exchanges occur between karstic Conduit System (CS) and Porous Fractured Matrix (PFM) that prevents from using this approximation without caution. The conservative tracer approximation boils down to consider the cooling of CS water by PFM flow in an open thermodynamic system where the CS is bounded by an Adiabatic Wall (AW). The resulting CS water temperature contrasts with the one obtained from more complete models (CW), which also take into account heat conduction within the CS, within the PFM, and from the CS to PFM through CS a Conductive Wall. In order to assess first orders of this error, the dimensionless equations, characteristic of CS cooling by PFM, have been solved thanks to Alternate Finite Difference Implicit methods both in AW and CW configurations. Four groups of dimensionless numbers appear in the various terms of energy and mass equations among which the Peclet and Reynolds numbers depict the large morphologic and hydrologic variability of natural karstic systems. A parametric exploration of the differences between AW and CW models has then been conducted vs. Peclet numbers (Pe numbers varying from 106 to 109, at constant CS Reynolds number) and vs. Reynolds numbers (Red varying from 103 to 107, at constant Peclet number). The error curves bound finite volumes in the Peclet–Reynolds space that converge uniformly to zero for the extreme values of these parameters. However, for Peclet and Reynolds numbers characteristic of realistic fluviokarst configurations, the errors reach finite values, that give first order information assessing the error done by considering temperatures as conservative tracers. Maximum relative errors around 10−2 (in fact 0.0092) have been found varying Pe; while it remained slightly lower than 0.7 × 10−2 varying Red. An illustrative example of the temperature conservative tracer AW approximation is presented with the data obtained from the main morphologic and hydrologic properties of the Cent–Font resurgence (Hérault, France). According to the results, the error reached at the output of the fluviokarst is 0.00613 (for Pe = 1.4993 × 108 and Red = 4.2969 × 104). When rescaled to the physical domain, this error leads to a temperature difference of 1.77 K between the CW and AW configurations.
ISSN: 1812-2108

hal-01358348
https://hal.archives-ouvertes.fr/hal-01358348
https://hal.archives-ouvertes.fr/hal-01358348/document
https://hal.archives-ouvertes.fr/hal-01358348/file/hessd-11-169-2014.pdf
DOI : 10.5194/hessd-11-169-2014

Éditeur(s) : HAL CCSD Springer Verlag
Résumé : International audience
A new genus and species of deep-sea eelpout (Zoarcidae), Barbapellis pterygalces, is herein described from a single adult female specimen carrying eggs and measuring 204 mm in total length. It was collected on the eastern Antarctic continental slope, off Terre Ad,lie, at ca. 1,200 m depth, on muddy bottom. Barbapellis is placed in the subfamily Gymnelinae and can be distinguished from all other genera by morphological characters unusual in zoarcids as well as by molecular barcoding. The genus is characterized by the presence of a complex system of cephalic skin crests and flaps, especially well developed around the mouth. A new terminology is proposed for the eleven crests and sevenfolds described. The skin folds may be used for foraging on muddy sea bottoms. The genus is also characterized by large, flexible, and highly palmate pectoral fins. The designation of the new genus is discussed.
ISSN: 0722-4060

hal-01544913
https://hal.archives-ouvertes.fr/hal-01544913
DOI : 10.1007/s00300-011-1057-3

Éditeur(s) : Wiley-blackwell
Résumé : A new benthic dinoflagellate species, Prorocentrum bimaculatum sp. nov., is studied from Kuwaits marine sediments, based on detailed morphological and molecular data. Cells are large, oblong oval in shape. They are 49.955.3 mu m long and 38.443.2 mu m wide. The ornamentation of this new species is peculiar, and characterized by smooth valves with large pores (0.320.50 mu m) scattered on their surface, except in two circular patches of similar to 15 mu m in diameter, devoid of ornamentation and located on both sides of the valve centers. The periflagellar area is widely triangular, located in a moderate excavation of the right valve, and comprises nine platelets. The intercalary band of P. bimaculatum is smooth. The molecular phylogenetic position of this new taxon was inferred from SSU and LSU rDNA genes. In both phylogenetic analyses, P. bimaculatum branched with high support with Prorocentrum consutum and formed a clade sister to the one including P. lima and related species such as P. arenarium, P. belizeanum, P. hoffmannianum, and P. maculosum. From the phylogenetic study, since most species related to P. bimaculatum are known for their toxic effects and production of okadaic acid, this new species can be considered as a potential toxin producer, but this has to be analyzed.
Journal Of Phycology (0022-3646) (Wiley-blackwell), 2012-02 , Vol. 48 , N. 1 , P. 211-221

Droits : 2012 Phycological Society of America
http://archimer.ifremer.fr/doc/00066/17756/15698.pdf
DOI:10.1111/j.1529-8817.2011.01102.x
http://archimer.ifremer.fr/doc/00066/17756/

Éditeur(s) : HAL CCSD AGU and the Geochemical Society
Résumé : International audience
Microbathymetry data, in situ observations, and sampling along the 13°20′N and 13°20′N oceanic core complexes (OCCs) reveal mechanisms of detachment fault denudation at the seafloor, links between tectonic extension and mass wasting, and expose the nature of corrugations, ubiquitous at OCCs. In the initial stages of detachment faulting and high-angle fault, scarps show extensive mass wasting that reduces their slope. Flexural rotation further lowers scarp slope, hinders mass wasting, resulting in morphologically complex chaotic terrain between the breakaway and the denuded corrugated surface. Extension and drag along the fault plane uplifts a wedge of hangingwall material (apron). The detachment surface emerges along a continuous moat that sheds rocks and covers it with unconsolidated rubble, while local slumping emplaces rubble ridges overlying corrugations. The detachment fault zone is a set of anostomosed slip planes, elongated in the along-extension direction. Slip planes bind fault rock bodies defining the corrugations observed in microbathymetry and sonar. Fault planes with extension-parallel stria are exposed along corrugation flanks, where the rubble cover is shed. Detachment fault rocks are primarily basalt fault breccia at 13°20′N OCC, and gabbro and peridotite at 13°30′N, demonstrating that brittle strain localization in shallow lithosphere form corrugations, regardless of lithologies in the detachment zone. Finally, faulting and volcanism dismember the 13°30′N OCC, with widespread present and past hydrothermal activity (Semenov fields), while the Irinovskoe hydrothermal field at the 13°20′N core complex suggests a magmatic source within the footwall. These results confirm the ubiquitous relationship between hydrothermal activity and oceanic detachment formation and evolution.
ISSN: 1525-2027

hal-01571973
https://hal.archives-ouvertes.fr/hal-01571973
https://hal.archives-ouvertes.fr/hal-01571973v2/document
https://hal.archives-ouvertes.fr/hal-01571973/file/Escart-n_et_al-2017-Geochemistry%2C_Geophysics%2C_Geosystems.pdf
DOI : 10.1002/2016GC006775

Éditeur(s) : HAL CCSD Hong Kong : World Academic Publishing
Résumé : International audience
In automatic image analysis, when using natural images, it is important to select the elements in a scene that can lead to correct characterization. Extraneous elements can result in poor values in the parameter evaluation for recognition. Irrelevant elements also increase the processing time, because they can be used incorrectly by the algorithms for characterization or identification. The goal of this paper is to offer identification algorithms and characterizations that will allow effective recognition. We base our procedure on the photographer focus areas to identify those relevant elements in a scene. In this work, we propose a procedure to select the relevant shape from natural images. The treatment uses focal depth with edge detectors. The resulting points are combined with a region partition to obtain relevant shapes.
ISSN: 2309-0650

hal-01278550
https://hal.archives-ouvertes.fr/hal-01278550

Éditeur(s) : HAL CCSD Springer Verlag/EDP Sciences
Résumé : International audience
Context : Functional - structural models (FSM) of tree growth have great potential in forestry, but their development, calibration and validation are hampered by the difficulty of collecting experimental data at organ scale for adult trees. Due to their simple architecture and morphological properties, " model plants " such as Cecropia sciadophylla are of great interest to validate new models and methodologies, since exhaustive descriptions of their plant structure and mass partitioning can be gathered. * Aims : Our objective was to develop a model-based approach to analysing the influence of environmental conditions on the dynamics of trophic competition within C. sciadophylla trees. * Methods : We defined an integrated environmental factor that includes meteorological medium-frequency variations and a relative index representing the local site conditions for each plant. This index is estimated based on model inversion of the GreenLab FSM using data from 11 trees for model calibration and 7 trees for model evaluation. * Results : The resulting model explained the dynamics of biomass allocation to different organs during the plant growth, according to the environmental pressure they experienced. * Perspectives : By linking the integrated environmental factor to a competition index, an extension of the model to the population level could be considered.
ISSN: 1286-4560

hal-00780347
https://hal-ecp.archives-ouvertes.fr/hal-00780347
https://hal-ecp.archives-ouvertes.fr/hal-00780347/document
https://hal-ecp.archives-ouvertes.fr/hal-00780347/file/Letort2011AFS.pdf
DOI : 10.1007/s13595-011-0131-x

Éditeur(s) : HAL CCSD Editions Paralia CFL
Résumé : The wave-dominated beach barrier of Villeneuve-Lès-Maguelone extends between Palavas and Frontignan (Gul f of Lions, northernmost Me diterranean Sea), along a slightly natural sandy protected area char acterized by typical and well-expressed morphologies. In the nearshore, the sea bottom shows one or two approximately rectilinear sand bars. In 2010-2011, we pe rformed a 6 month-long monitoring (autumn 2010/late spring 2011) of a 500 meter-long se gment along this sand barrier. We used RTK D-GPS offering centimeter resolution to acquire sets of elevation data on the beach and the upper shoreface. The study is innovative because a full morphologic monitoring was performed each time the wave/ wind conditions changed significantly. These changes were tracked in real-time thanks to a set of hydrodynamic equipments deployed at sea, including well-known DREAL buoys. We identify from well- documented data: (1) a beach reconstruction cycle at the shorelin e after a moderate storm event (wave height at 3-4 m) and (2) how a sand bar in the nearshore migrates to the shoreline and drives the shoreline shift.
ISSN: 1760-8716

hal-00854402
https://hal.archives-ouvertes.fr/hal-00854402
DOI : 10.5150/jngcgc.2012.023-C

Éditeur(s) : HAL CCSD American Geophysical Union (AGU)
Résumé : International audience
Subduction of a narrow slab of oceanic lithosphere beneath a tightly curved orogenic arc requires the presence of at least one lithospheric scale tear fault. While the Calabrian subduction beneath southern Italy is considered to be the type example of this geodynamic setting, the geometry, kinematics and surface expression of the associated lateral, slab tear fault offshore eastern Sicily remain controversial. Results from a new marine geophysical survey conducted in the Ionian Sea, using high-resolution bathymetry and seismic profiling reveal active faulting at the seafloor within a 140 km long, two-branched fault system near Alfeo Seamount. The previously unidentified 60 km long NW trending North Alfeo Fault system shows primarily strike-slip kinematics as indicated by the morphology and steep-dipping transpressional and transtensional faults. Available earthquake focal mechanisms indicate dextral strike-slip motion along this fault segment. The 80 km long SSE trending South Alfeo fault system is expressed by one or two steeply dipping normal faults, bounding the western side of a 500+ m thick, 5 km wide, elongate, syntectonic Plio-Quaternary sedimentary basin. Both branches of the fault system are mechanically capable of generating magnitude 6–7 earthquakes like those that struck eastern Sicily in 1169, 1542, and 1693.
ISSN: 0278-7407

insu-01256887
https://hal-insu.archives-ouvertes.fr/insu-01256887
https://hal-insu.archives-ouvertes.fr/insu-01256887/document
https://hal-insu.archives-ouvertes.fr/insu-01256887/file/GutscherEtal_2015_Tectonics.pdf
DOI : 10.1002/2015TC003898

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The mycotoxin alternariol (AOH), a frequent contaminant in fruit and grain, is known to induce cellular stress responses such as reactive oxygen production, DNA damage and cell cycle arrest. Cellular stress is often connected to autophagy, and we employed the RAW264.7 macrophage model to test the hypothesis that AOH induces autophagy. Indeed, AOH treatment led to a massive increase in acidic vacuoles often observed upon autophagy induction. Moreover, expression of the autophagy marker LC3 was markedly increased and there was a strong accumulation of LC3-positive puncta. Increased autophagic activity was verified biochemically by measuring the degradation rate of long-lived proteins. Furthermore, AOH induced expression of Sestrin2 and phosphorylation of AMPK as well as reduced phosphorylation of mTOR and S6 kinase, common mediators of signaling pathways involved in autophagy. Transmission electron microscopy analyzes of AOH treated cells not only clearly displayed structures associated with autophagy such as autophagosomes and autolysosomes, but also the appearance of lamellar bodies. Prolonged AOH treatment resulted in changed cell morphology from round into more star-shaped as well as increased β-galactosidase activity. This suggests that the cells eventually entered senescence. In conclusion, our data identify here AOH as an inducer of both autophagy and senescence. These effects are suggested to be to be linked to AOH-induced DSB (via a reported effect on topoisomerase activity), resulting in an activation of p53 and the Sestrin2-AMPK-mTOR-S6K signaling pathway.
ISSN: 0300-483X

hal-01117627
https://hal-univ-rennes1.archives-ouvertes.fr/hal-01117627
https://hal-univ-rennes1.archives-ouvertes.fr/hal-01117627/document
https://hal-univ-rennes1.archives-ouvertes.fr/hal-01117627/file/Autophagy%20and%20senescence_accepted.pdf
PUBMED : 25456271

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Reef positions record the interaction between eustasy and tectonics, and have been used worldwide to characterize vertical deformations of upper-plates at different time-scales and constrain the seismic behavior of megathrusts. Along the Lesser Antilles volcanic arc, high-resolution marine geophysical data were collected on the 2–20 km wide eastern Martinique reef platform to reconstruct its stratigraphic and morphologic history, and understand the influence of local normal faulting, volcanism and plate-scale subduction processes on Holocene and Late Pleistocene reef development. The subsiding Martinique platform's stratigraphy is composed of multiple superimposed sea-level highstand deposits separated by subaerial exposure surfaces of sea-level low stands. The carbonate platform consists of two laterally-extensive carbonate units (unit U2 overlying unit U3) that extend to the platform edge to a depth of − 95 m MSL (mean sea level), and form two morphologic terraces, M2 and M3 respectively. The landward portion of unit U2 is partially overlain between 0 and − 60 m MSL by the living reef tract U1. The current reef is composed of a landward fringing reef, a lagoon and a seaward barrier reef, the latter forming a double-bank barrier around the Caravelle Peninsula. In near-shore multi-channel seismic profiles, a distinct reflector at ~− 35 m MSL, probably a subaerial exposure surface E1, separates the reef sequence formed during the last transgression from a Pleistocene fossil reef tract forming unit U2. Offshore of Mount Pelée volcano (Late Pleistocene), the Holocene reef did not develop above unit U2, whose upper surface is incised by channels and apparent sinkholes. During the Holocene transgression, the possibility of excessive turbidity due to volcanic activity may have inhibited reef development in this area. The un-dated unit U2 probably developed 120–130 ka ago during the last interglacial (MIS 5.5) + 6 m MSL highstand as thick, extensive reefs deposited all along the Lesser Antilles arc. Due to subsidence, MIS 5.5 reefs are not represented by onshore facies, except along the southern Sainte Anne Peninsula where normal faulting and uplift balances island-scale subsidence. Based on unit U2's present elevation and assuming an MIS 5.5 age and + 6 m MSL sea level, Martinique has subsided at maximum 0.3 m/ky, likely due to subduction processes that question the coupling state of the megathrust.
ISSN: 0025-3227

hal-01307036
https://hal.archives-ouvertes.fr/hal-01307036
DOI : 10.1016/j.margeo.2015.08.001

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The East Sayan ranges are a key area to understand the interactions between the transpressive deformation linked to the far-field effects of the India-Asia collision and the extension linked to the opening of the Baikal Rift System. The active deformation that affects this range is very recent (around 5 Ma) but occurs in a very complex morphotectonic setting and the understanding of the Tertiary deformation relies entirely on a detailed knowledge of the pre-deformation situation. Using apatite fission track thermochronology, cosmogenic 10Be and morphological study on Tertiary lava flows we demonstrate that prior to the Oligocene the morphology of the East Sayan area was characterized by a wide, constantly rejuvenated erosion surface. Apatite fission track thermal modelling indicates that this surface started to form at least in Late Jurassic-Early Cretaceous (140-120 Ma). The long-term exhumation rates (several tens of million years) derived from apatite fission track data (17.5 m/Ma) and the short-term erosion rates (over a few hundred thousand years) derived from cosmogenic 10Be data (12-20 m/Ma) are coherent implying a near constant mean erosion rate since Late Jurassic. This constant, slow erosion prevented the formation of a lateritic-kaolinic weathering crust on the planation surface. By Oligocene-early Miocene times a long wavelength uplift that remains to be explained, induced incision that created shallow valleys later filled by basaltic lava flows. Finally, the present short-wavelength topography initiated during the Pliocene.
ISSN: 0743-9547

insu-00805603
https://hal-insu.archives-ouvertes.fr/insu-00805603
DOI : 10.1016/j.jseaes.2011.09.017

Éditeur(s) : HAL CCSD
Résumé : The present PhD thesis is devoted to the numerical simulation and analysis of shear on cohesive granular materials. In the framework of the Contact Dynamics method, we developed a model of cohesive bonding, which mimics cohesion by cementation. This model involves three contact strength parameters (a tensile strength, a coefficient of sliding friction, and a coefficient of rolling friction) as well as a local criterion, which controls the creation and the breaking of cohesive bonds. All contacts are cohesive at the beginning of the numerical simulations, and contact rupture leads to an irreversible loss of tensile strength (debonding). We varied systematically the three contact strength parameters and studied their influence on the shear strength, the dilatancy, and the microstructure of the granular media. Our results show that internal friction and macroscopic tensile strength have different origins at the contact scale. We also find that the microstructure of the granular media, when sheared at the steady state (also known as the `critical state"), is strongly affected by the local coefficients of sliding and rolling friction. In particular, the mechanical role of the weak network changes with these two contact parameters, which results from the formation of a new structure of force transmission. On the other hand, we also applied the same numerical simulation method to the simulation of landslides. We developed a methodology, which takes into account the initial morphology of the hillslope, the strength of geomaterials, and a triggering factor, integrating in the same model the initiation and propagation phases of the landslide. To illustrate this methodology, we applied it to the simulation of a hypothetical example of avalanche triggered by the progressive rise of a water table.
Ce travail de thèse porte sur la modélisation numérique et l'analyse du cisaillement dans les milieux granulaires cohésifs. Dans le cadre de la méthode de la Dynamique des Contacts, nous avons développé un modèle de cohésion qui cherche à imiter la cohésion par cimentation. Ce modèle fait intervenir trois paramètres de résistance au niveau des contacts (une résistance à la traction, un coefficient de frottement de glissement, et un coefficient de frottement de roulement) ainsi qu'un critère de création et de rupture des liens cohésifs. Les contacts sont cohésifs au début des simulations et leur rupture entraîne la perte irréversible de la résistance à la traction. Nous avons fait varier les trois paramètres microscopiques et nous avons étudié leur influence dans la résistance au cisaillement, la dilatance, et la microstructure du milieu. Nos résultats montrent que le frottement interne et l'adhésion macroscopiques ont des origines microscopiques différentes. Nous observons aussi que la microstructure du milieu cisaillé à l'état stationnaire (aussi connu comme ``l'état critique") est fortement affectée par l'angle de frottement et la résistance au roulement au niveau des contacts. En particulier, le rôle mécanique du réseau faible change avec ces deux paramètres microscopiques, ce qui résulte de la formation d'une nouvelle structure de transmission de forces. D'autre part, nous avons appliqué cette méthode de simulation numérique à l'étude d'un processus naturel : les glissements de terrain. Nous avons développé une méthodologie qui tient compte de la morphologie initiale du système, de la résistance des géomatériaux, et d'un mécanisme de déclanchement, ce qui permet d'intégrer dans le même modèle les phases d'initiation et de propagation du glissement. Pour illustrer cette méthodologie, nous l'avons appliquée à la modélisation d'un exemple hypothétique d'avalanche déclenchée par la montée progressive du niveau d'une nappe d'eau.
https://tel.archives-ouvertes.fr/tel-00311303

tel-00311303
https://tel.archives-ouvertes.fr/tel-00311303
https://tel.archives-ouvertes.fr/tel-00311303/document
https://tel.archives-ouvertes.fr/tel-00311303/file/these_estrada.pdf

Éditeur(s) : HAL CCSD
Résumé : Sand intrusions (or injectites) are most often the product of post-depositional remobilization of sand leading to its injection into the surrounding rocks. While injectites were recognized for the first time nearly 200 years ago, their emplacement process has been studied for a couple of decades only, since the concepts of deep sea depositional environments have allowed us to better understand their emplacement processes. However, these processes are still relatively poorly understood. Our approach is based on the study of injectites in the Lower Congo Basin from seismic and well data, which we compare to a fossil system in the SE France basin. We have shown that: (1) In buried turbidite channel systems draping deposits on the channel flanks and terraces of channels have the same geophysical signature as 'wing-like' injectites. Finally, the only criterion for identifying seismic injectites is the presence of bedding-discordant seismic reflections, and in the best case the associated uplift of the overlying seismic reflectors. (2) Seismic-scale conical and saucer-shaped sand injectites have been identified in the Lower Congo Basin. The remobilization is likely due to overpressuring induced by the buoyancy effect of hydrocarbons trapped in the margins of a lobe buried underneath 160 m of sediment, followed by the sudden injection of fluidized sand associated with fault reactivation of faults (with a possible role of nearby salt diapirs). (3) A network of injectites (dykes, sills/wings and laccoliths) was formed in the Vocontian basin during the late Albian and/or early Cenomanian, from a lower-middle Albian turbidite channel. The emplacement is probably due to the early compartmentalization of the channel during its burial and the increase of the sedimentation rate generating overpressure; and the subsequent large influx of deep fluids triggering injection. The injection of sand was polyphased: a first episode formed the sills and another emplaced the dykes. Sills/wings and dykes propagated about 2 km laterally away from the parent sand body and about 200 m up to the surface, revealing a much more extended lateral than vertical reach, contrary to the classically accepted idea from the interpretation of seismic data. (4) The emplacement of this large network of injectites was governed by hydrofracturing. Therefore, its morphology is dependent on the host rock heterogeneity (isotropy, fractures), the paleo-stress orientation (ó3 = NW-SE) and the burial depth of the source (300-600 m) at the time of injection. The study of this fossil network allows us to define the relationship between morphology of the injected network and stress state at the time of injection. This relationship can be extrapolated to constrain the morphology of subsurface networks beyond seismicvisibility. (5) Sands injected into low permeability lithologies bear evidence to a major event of fluid escape in the studied basin, but also channeled fluids long after their formation. In this way, injectites both attest to specific episodes of fluid migration in sedimentary basins and contribute to long-lived re-routing of migrating fluids once emplaced. The injection of sand is associated with the sudden escape of fluids, probably resulting from a significant tectonic and/or sedimentary event; in addition, the architecture of injectite networks is governed by the local paleo-stress and heterogeneity in the host rock. Consequently, characterizing injectite networks is an important step in understanding the plumbing systems of continental margins, i.e. the post-depositional evolution of sedimentary basins.
Les intrusions sableuses (ou injectites) sont le plus souvent le produit de la remobilisation post-dépositionnelle des sédiments et de l'injection du sable dans les roches environnantes. Bien que reconnues pour la première fois il y a près de 200 ans, elles ne sont réellement étudiées que depuis quelques dizaines d'années, depuis que les concepts sur les environnements de dépôt dans les domaines marins profonds nous permettent de mieux comprendre les processus de mise en place. Cependant, ces processus restent encore aujourd'hui relativement mal compris. Notre approche repose sur l'étude d'injectites dans le bassin du Bas-Congo a partir de données de sismique et de puits que nous comparerons a un système fossile dans le bassin du SE de la France. Nous avons montre que : (1) Dans des systèmes de chenaux turbiditiques enfouis, les dépôts de drapage sur les marges et terrasses de chenaux présentent la même signature géophysique que les injectites de type "wing". Finalement, le seul critère sismique d'identification des injectites est la présence de réflexions sismiques sécantes vis-a-vis de la stratigraphie associée dans le meilleur des cas au soulèvement des réflecteurs sismiques sus-jacents. (2) Des injectites d'échelle sismique en forme de cône et d'assiette ont été identifiées dans le bassin du Bas-Congo. La remobilisation résulte probablement des pressions anormales induites par l'effet de flottabilité des hydrocarbures piégés dans les marges d'un lobe enfoui sous 160 m de sédiment, puis de l'injection soudaine du sable fluidise associée a la réactivation de failles (possible rôle des diapirs de sel a proximité). (3) Un réseau d'injectites (dykes, sills/wings et laccolites) s'est formé dans le bassin Vocontien entre la fin de l'Albien supérieur et/ou le début du Cénomanien, depuis un chenal turbiditique de l'Albien inférieur-moyen. La mise en place résulte probablement de la compartimentalisation précoce du chenal au cours de son enfouissement et de l'augmentation du taux de sédimentation générant la surpression et de l'apport ulterieur d'importante quantité de fluides profonds déclenchant l'injection. L'injection du sable a été polyphasée : une première injection a formé des sills et une suivante des dykes. Les sills/wings et les dykes se sont propagés latéralement au chenal source sur environ 2 km et vers la surface sur environ 200 m, mettant en évidence une forte remobilisation latérale plutôt que verticale, contrairement a l'idée classiquement admise a partir de l'interprétation des données sismiques. (4) La formation de ce large réseau d'injectites a été gouvernée par des mécanismes d'hydrofracturation. Par conséquent, sa morphologie a été dépendante des hétérogenéités de la roche hôte (milieu isotrope, fracture), des directions de paléo-contraintes (ƒÐ3 = NWSE) et de la profondeur d'enfouissement de la source (300-600 m) au moment de l'injection. L'étude de ce réseau fossile permet de définir les relations entre morphologie du réseau injecté et état de contraintes au moment de l'injection. Cette relation peut être extrapolée de façon à contraindre la morphologie des réseaux de subsurface au-delà de la visibilité sismique. (5) Les sables injectés dans des lithologies de faible perméabilité témoignent d'un épisode d'échappement de fluide important dans les bassins étudiés mais ont aussi guide les fluides longtemps après leur formation. Les injectites contribuent ainsi a l'initiation épisodique et la pérennisation de migrations de fluides dans les bassins sedimentaires. Le processus d'injection est associé a l'échappement brutal de fluides, résultant vraisemblablement d'un évènement tectonique et/ou sédimentaire important, et l'architecture des réseaux d'injectites est gouverné par les paléo-contraintes locales et les hétérogénéités de la roche hôte. Par conséquent, la caractérisation des réseaux d'injectites est une étape importante dans la compréhension de la plomberie des marges, c'est-a-dire l'évolution post-dépôt des bassins sédimentaires.
https://tel.archives-ouvertes.fr/tel-01011486

tel-01011486
https://tel.archives-ouvertes.fr/tel-01011486
https://tel.archives-ouvertes.fr/tel-01011486/document
https://tel.archives-ouvertes.fr/tel-01011486/file/These_Monnier_2013_banalisee.pdf

Éditeur(s) : HAL CCSD Wiley
Résumé : International audience
Morphology can be misleading in the representation of phylogenetic relationships, especially in simple organisms like cnidarians and particularly in hydrozoans. These suspension feeders are widely distributed in many marine ecosystems, and the family Aglaopheniidae Marktanner-Turneretscher, 1890 is among the most diverse and visible, especially on tropical coral reefs. The taxonomy of this family is based on morphological characters with emphasis on reproductive structures for the identification of genera. This study is the most comprehensive molecular phylogeny of the Aglaopheniidae to date, including six genera and 38 species, of which 13 were investigated for the first time and sampled on tropical coral reefs throughout the Indo-Pacific region. For newly sampled individuals, we sequenced the 16S rRNA, the nuclear locus comprising the complete ITS1-5.8S rRNA gene-ITS2 and the first intron of the calmodulin nuclear gene. Phylogenetic analyses of the data revealed and confirmed a general polyphyly, or doubtful monophyly, of all sampled genera in tropical regions based on both the mitochondrial and nuclear markers. Our results revealed that several morphological characters used today are unsuited to resolve phylogenetic relationships between species and genera, as well as the high phyletic diversity within this family. Future revision of the classification of this family will require extensive geographic sampling and the use of an integrative approach.
ISSN: 0300-3256

hal-01253738
https://hal.archives-ouvertes.fr/hal-01253738
https://hal.archives-ouvertes.fr/hal-01253738/document
https://hal.archives-ouvertes.fr/hal-01253738/file/Phylogenetic%20relationships%20within%20Aglaopheniidae%20%28Cnidaria%2C._hal.pdf
DOI : 10.1111/zsc.12135

Éditeur(s) : HAL CCSD
Résumé : International audience
The subterranean environment is often described as “extreme” and food poor. Laboratory experiments have shown that blind Mexican tetra Astyanax mexicanus (De Filippi, 1853) cavefish are better at finding food in the dark than surface fish. Several morphological and behavioural attributes that could foster this obvious adaptive response to cave environments have been described. Nonetheless, it is currently unknown what young cavefish actually eat in their natural cave environment. Our results from the Pachón cave in México during the dry and rainy season show that fry are efficient predators in their natural cave environment. Their primary food item is aquatic crustaceans. The guts of post-larval, pre-juvenile stage individuals (n=9) contained an average of 17.9 water fleas (Cladocera), copepods, ostracods, and isopods. Thus, the fry in this cave are well-fed. The Pachón cave environment does not appear to be “food poor” for juvenile cavefish. Food regimes change between post-larval and adult stages to become more dependent on partially decomposed material, guano, or detritus from the mud. We discuss the data with regards to our current developmental and genetic understanding of cavefish morphological and behavioural evolution, particularly regarding its enhanced Vibration Attraction Behaviour (VAB).
Subterranean Biology

hal-01432027
https://hal.archives-ouvertes.fr/hal-01432027
DOI : 10.3897/subtbiol.21.11046

Éditeur(s) : HAL CCSD
Résumé : International audience
Volumes of magma intruded in and emitted by volcanoes through time can be estimated by reconstruction of vol-cano's morphology and time sequence. Classical approaches for quantifying magma volumes on active volcanoes are based on the difference between pre-and post-eruption digital elevation models (DEM), but this kind of approach needs the pre-eruptive surfaces to be available. For old and eroded volcanoes these surfaces are poorly constrained. However, because the geometrical form of many volcanic edifices exhibits a remarkable symmetry we propose, here, a new approach using primary volcanic landforms in order to estimate the amount of the both erupted and eroded material and to locate eruptive centers. A large fraction of composite volcanoes have near constant slope on their flanks and a form that is concave upwards near their summits. But many phenomena can lead to non-symetrical edifices and complex morphologies can result, for example from parasitic centers of volcanism on the flanks, from alternation of short effusive and explosive construction phases, from flank or caldera collapses, or from glacial and other types of erosion. In this study we propose that, on the first order approximation, complex morphologies can be modeled by piling regular cones. In this model, cones centers and slopes are derived by fitting primary volcanic landform with a linear function :elevation=f(distance from center). Such an approach allows to estimate both errors on location of the eruptive center and on the volume of the resulting cones. This model can then be used for quantifying volume of erupted and eroded material, and for quantifying catastrophic events as giant landslides or flank collapse. This approach is tested on four different active volcanoes : Mount Mayon (Philippines), Mount Fuji (Japan), Mount Etna (Sicily) and Mount Teide (Canary Island) to estimate errors in volume between modeled and actual edifices. It is then used on volcanoes of La Réunion hotspot to reconstruct the Piton des Neiges and Piton de la Fournaise volcanoes at its different stages of growing.
EGU 2014
Vienna, Austria

hal-01386609
http://hal.univ-reunion.fr/hal-01386609

Éditeur(s) : HAL CCSD Magnolia Press
Résumé : International audience
Hydroporus rifensis sp. n. is described from Central Rif in northern Morocco. The new species is the first member of the Hydroporus tristis-group to be recorded from the African continent. Analyses of cytochrome oxydase 1 (CO1) and 16S rRNA partial sequences indicate unambiguously that H. rifensis sp. n. is a geographical vicariant of the widespread and common European species Hydroporus gyllenhalii Schiodte, 1841, whose closest Iberian populations are known from southern Spain and southern Portugal. Genetically the two species are very close, but in terms of morphology they differ considerably, to the extent that in several respects H. rifensis sp. n. is more similar to some species of the H. striola-group, the sister clade of the H. tristis-group. The new species differs from H. gyllenhalii notably by its larger size, lighter elytra, stronger pubescence, much finer elytral punctation, morphology of the median prosternum area, and marked differentiation of protarsal claws in male. Hydroporus rifensis sp. n. is the first dytiscid species endemic to the Rif and the second Hydroporus species endemic to Morocco.
ISSN: 1175-5326

hal-01544481
https://hal.archives-ouvertes.fr/hal-01544481
DOI : 10.11646/zootaxa.3841.1.4

Éditeur(s) : HAL CCSD Wiley-Blackwell
Résumé : International audience
P>Tehran is one of the largest cities in the world (12 million people) facing seismic hazard. Standing at the foothills of Alborz Mountains, the capital of Iran is exposed to potential earthquakes associated with several nearby active faults. Classically mentioned as active features, the Kahrizak, the North Rey and the South Rey scarps cross the town itself and would be the sources of several destructive historical earthquakes. However, the nature of these topographic scarps remains uncertain. To assess whether these features correspond to active faults, we carried out a morphological and stratigraphic study. Our results show that the three scarps define horizontal scarp lines that follow contour lines matching ancient shorelines further East. This point, associated with other morphological characteristics such as the flatness of the upper and the lower surfaces, the long and regular streams that incised the upslope upper surfaces and the fact that the deposits are horizontal and without deformations, suggests in fact that the Kahrizak, the North Rey and the South Rey scarps correspond most likely to ancient shore lines and are not fault scarps.
ISSN: 0954-4879

hal-00496390
https://hal.archives-ouvertes.fr/hal-00496390
DOI : 10.1111/j.1365-3121.2010.00938.x

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Experimental modelling applied to the study of orogenic wedge dynamics has been a subject of fruitful research for more than 30 years, although the technique dates back as far as the early XIXth century. On one hand, several first order parameters controlling the structural evolution of mountain belts have been intensively investigated using the classic tectonic "sandbox" models. The main parameters are the properties of the basal décollement, the deforming material, the backstop, and fluxes, kinematics and surface processes. On the other hand, the morphological evolution of a mountain relief subjected to changing tectonic or climatic forcing has been addressed using another kind of approach called "geomorphic" models. Nowadays, the literature is extremely rich, particularly for the sandbox technique, so that it becomes difficult to have an exhaustive view of the effects of the above parameters on mountain evolution. In this article, we propose a detailed review of the main results obtained using both "tectonic" and "geomorphic" approaches. Our goal is to provide an almost complete state-of-the-art in the experimental study of relief dynamics to guide present and future researchers in their understanding of mountain belt evolution.
ISSN: 0040-1951

hal-00757713
https://hal.archives-ouvertes.fr/hal-00757713
DOI : 10.1016/j.tecto.2012.01.027

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
On the Gulf of Lions margin, the Messinian Salinity Crisis (MSC) event led to a significant and widespread erosion of the Miocene shelf and slope. It is thus difficult nowadays to restore the morphology of the margin at the beginning of the crisis, and to study the Middle-Upper Miocene series rarely preserved from erosion. In this study, thanks to the use of multichannel seismic reflection data from the Gulf of Lions western slope, it has been possible to image the Miocene slope deposits. Interpretation of the data reveals several diachronic sediment bodies just beneath the Miocene/Pliocene boundary. These bodies are related to slope erosional-depositional complexes, underlain by erosional unconformities outlined by seismic reflector truncations. They are V- or U-shaped in cross section. Over their mapped extent, these bodies are typically 8-12 km wide and incise up to 600 ms TWTT into the Miocene slope deposits. in plan view, they are roughly elongated NW-SE, perpendicularly to the present day shelf break, and they progressively migrate towards the South-East. We interpret these seismic bodies as buried Miocene submarine canyons pre-dating the dramatic drawdown related to the MSC. In this study we try to constrain their age, and we discuss the events that may be at their origin. We also discuss the long-term impact of these slope canyons on the evolution of the margin.
ISSN: 0264-8172

hal-00411546
https://hal.archives-ouvertes.fr/hal-00411546
DOI : 10.1016/j.marpetgeo.2008.04.006