Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Structural controls are critical during magmatic-to-hydrothermal transition in the formation of intrusion-related gold deposits. They may explain why only some parts of intrusions are mineralized and why only very few intrusions host large deposits. Moreover, most of these gold deposits postdate peak regional metamorphism and were formed in zones of relatively low strain. Indeed, the efficiency of structural gold traps is highest along favourably oriented intrusion/host-rock contacts where mechanical instability maintains high permeability in the cracked thermal aureole. This may be reinforced by melt injections from an underlying root zone. We present a structural analysis of the deformation features of a granite-pluton roof; large-scale dykes and a network of gold veins are intensively developed in this roof, recording a succession of mechanical instabilities. Our gravity survey underlines the presence of a pluton feeder zone located just beneath the mineralized network. It is argued that interferences between regional stress and melt injection in the feeder zone favoured the development of the network by strain located close to the granite roof. This stresses the role of mechanical instabilities triggered by the combined effects of regional stress and melt dynamics in determining the location and size of this type of gold deposit.
ISSN: 0191-8141

insu-00914780
https://hal-insu.archives-ouvertes.fr/insu-00914780
https://hal-insu.archives-ouvertes.fr/insu-00914780/document
https://hal-insu.archives-ouvertes.fr/insu-00914780/file/manuscript.pdf
DOI : 10.1016/j.jsg.2013.11.006

Éditeur(s) : HAL CCSD Mineralogical Society of America
Résumé : International audience
Pressure-temperature divariant melting phase relations of model carbonated peridotite in the system CaO-MgO-Al2O3-SiO2-CO2 from 8 to 12 GPa are reported. From 8 to 12 GPa, melting temperatures on the studied pressure-temperature divariant surface rise quite rapidly. Liquids, in equilibrium with forsterite, orthopyroxene, clinopyroxene, and garnet, on the low-temperature side of the divariant surface are magnesiocarbonatitic in composition. With increasing temperature along an isobar on the pressure-temperature divariant surface, and with the same crystalline phase assemblage, liquids gradually become kimberlitic in their composition. Given the model system data reported here, Group IB kimberlites and perhaps some kimberlites from Greenland, Canada, and South Africa could be generated from direct melting of carbonated peridotite in the pressure range of approximately 6-8 GPa. Some kimberlites from Canada and Russia could have formed by partial melting of carbonated mantle peridotite at pressures of about 10-12 GPa. From 8 to 12 GPa, liquid compositions on the studied divariant surface show a limited compositional range, which implies that the divariant surface is essentially flat. The implied flatness of the divariant surface, and so long as the liquid is in equilibrium with the crystalline assemblage of forsterite + orthopyroxene + clinopyroxene + garnet on the divariant surface, indicate that kimberlites belonging to Group IA and those more magnesian than Group IA cannot have their origin in only being a melting product of carbonated mantle peridotite. The absence of topography of the studied pressure-temperature divariant surface in all likelihood limits the generation of kimberlites in the Earth's upper mantle only.
ISSN: 0003-004X

hal-01053915
https://hal.archives-ouvertes.fr/hal-01053915
DOI : 10.2138/am.2014.4826

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Melting experiments were performed on a silica-rich peridotite composition at 10-17 GPa to determine majoritic garnet-melt partition coefficients (D) for major and trace elements. Our results show that D for many elements, including Na, Sc, Y and rare earth elements (REE), varies significantly with increasing pressure or proportion of majorite component. Lu and Sc become incompatible at 17 GPa, with D decreasing from 1.5 at 10 GPa to 0.9 at 17 GPa. As predicted from lattice strain, log D for isovalent cations entering the large site of majoritic garnet exhibits a near-parabolic dependence on ionic radius. Our data are used to refine a previously published predictive model for garnet-melt partitioning of trivalent cations, which suffered from a lack of calibration in the 10-20 GPa range. Our results suggest that Archean Al-depleted komatiites from Barberton (South Africa) may have been generated by partial melting of dry peridotite at depths between 200 and 400 km. We also speculate that transition zone diamonds from Kankan (Guinea), which contain inclusions of majoritic garnet, may have formed from the partial reduction of CO2-rich magmas that subsequently transported them to the surface. This hypothesis would provide an explanation for the REE patterns of majoritic garnet trapped within these diamonds, including Eu anomalies. Finally, we show that segregation of majoritic garnet-bearing cumulates during crystallisation of a deep Martian magma ocean could lead to a variety of Lu/Hf and Sm/Nd ratios depending on pressure, leading to a range of ε143Nd and ε176Hf isotope signatures for potential mantle sources of Martian rocks.
ISSN: 0024-4937

hal-00767567
https://hal.archives-ouvertes.fr/hal-00767567
DOI : 10.1016/j.lithos.2012.06.013

Éditeur(s) : HAL CCSD Oxford University Press (OUP)
Résumé : International audience
Despite a relatively 'uniform' fertile composition (Al2O3 = 2 center dot 19-4 center dot 47 wt %; Fo% = 89 center dot 2 +/- 0 center dot 3%; Cr#(Spl) = 8 center dot 9 +/- 1 center dot 5%), the Montferrier peridotite xenoliths show a wide range of S contents (22-590 ppm). Most sulphides are interstitial and show peculiar pyrrhotite-pentlandite intergrowths and low abundances of Cu-rich phases. Sulphide-rich samples are characterized by strong enrichment in the light rare earth elements and large ion lithophile elements without concomitant enrichment of the high field strength elements. Such trace-element fractionation is commonly ascribed to metasomatism by volatile-rich melts and/or carbonatitic melts. S and Se (11-67 ppb), as well as S/Se (up to approximate to 12 000), are correlated with La/Sm. Cu, however, remains broadly constant (30 +/- 5 ppm). These features strongly suggest that the percolation-reaction of such volatile-rich fluids has led to sulphide enrichment with an atypical signature marked by strong fractionation of the chalcophile elements (i.e. S vs Se and Cu). S-rich xenoliths are also characterized by high (Pd/Ir)(N) (1 center dot 2-1 center dot 9; where subscript N indicates normalized to chondrite), (Pd/Pt)(N) between 1 center dot 5 and 2 center dot 2, and (Os/Ir)(N) up to 1 center dot 85. Despite the relative uniform fertile composition of the xenoliths, Re/Os ranges between 0 center dot 02 and 0 center dot 18. Os-187/Os-188 is extremely variable even within a single sample and can be as high as 0 center dot 1756 for the most S-rich samples. Sulphides show highly fractionated and variable abundances of the highly siderophile elements (HSE) [0 center dot 03 (Pd/Ir)(N) < 1283] and Re-Os isotopic composition (0 center dot 115 < Os-187/Os-188 < 0 center dot 172). Such variation can be observed at the thin-section scale. Whole-rock and in situ sulphide data demonstrate that chalcophile and HSE systematics and the Os isotopic composition of the upper mantle could be significantly modified through metasomatism, even with volatile-rich fluids. These features highlight the complex behaviour of the HSE in fluid-rock percolation-reaction models and suggest a complex interplay between sulphide addition (crystallization or sulphidation) and partial equilibration of pre-existing sulphide. The specific fractionations observed in chemical proxies such as S and Se, Os and Ir, and Pd and Pt, as well as the low abundance of Cu-rich sulphides, suggest that sulphide addition may not have occurred via sulphide melts. Rather, we infer that S was present as a dissolved species in a (supercritical) oxidizing, volatile-rich fluid (C-O-H-S +/- Cl) along with other chalcophile and siderophile elements such as Os, Pd, Re and Au. The highly radiogenic Os composition of this fluid ( Os-187/ Os-188 > 0 center dot 17) would imply that such fluids are derived from an uncommon type of mantle source possibly related to carbonatite melts.
ISSN: 0022-3530

hal-00644524
https://hal.archives-ouvertes.fr/hal-00644524
DOI : 10.1093/petrology/egr038

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The Oman ophiolite includes both a fossil fast spreading axis, defined by five mantle diapirs, and an off-axis mantle diapir emplaced 30 km from the axis, providing a natural laboratory for the study of off-axis magmatic processes. We compare field and petrological observations coupled with geochemical and isotopic analyses of samples from the off-axis diapir with those of the nearest on-axis diapir, with a particular focus on the Moho Transition Zone (MTZ). Both diapirs are defined by the presence of steeply plunging lineations, but in the on-axis case, these lineations rotate gradually into parallelism with the horizontal magmatic lineations of the overlying crust, while in the off-axis case, a shear zone separates the steeply plunging lineations from the horizontal lineations of the surrounding mantle. In the on-axis diapir, the MTZ is 50 to 500 m thick and composed of dunite with layered gabbro lenses whereas in the off-axis diapir, the MTZ is thicker and composed of dunite with massive (∼20% of MTZ) clinopyroxenite lenses and a notable absence of plagioclase. Moreover, the off-axis diapir is associated with amphibole-bearing intrusions, consisting of Mg-rich gabbroic sills in the mantle peripheral to the diapir, and microgabbroic lenses of broadly basaltic composition in the overlying crust. The ε Nd values of the pyroxenites in the MTZ of the off-axis diapir fully overlap with those of the intrusions in the surrounding mantle and crust, suggesting that they are genetically related. Calculated rare earth element (REE) abundances of liquids in equilibrium with clinopyroxene imply that the magmas that traversed the MTZ of the off-axis diapir were more depleted in highly incompatible elements than their counterparts in the MTZ of the on-axis diapir. On the other hand, Nd isotopic compositions of the off-axis samples (εNd=6.2–7.9εNd=6.2–7.9 in 18 of 19 samples) indicate derivation of their parental magmas from a less depleted source than that which produced the magma associated with the on-axis gabbro (εNd=7.8–9.2εNd=7.8–9.2, 10 analyses).To explain these observations, we suggest that the earliest magmas in the uprising off-axis diapir formed from the partial melting of pyroxenite veins with less radiogenic Nd isotopic compositions than those of the ambient peridotite. As the diapir traversed the cool, hydrated lithosphere these early melts interacted with depleted harzburgites, lowering the incompatible element contents of the melt products while having little effect on their Nd isotopic compositions. The great abundance of clinopyroxene in the off-axis MTZ might be explained by the high pyroxene component in the original melt but perhaps also by the presence of water in the lithosphere, which would favor the crystallization of clinopyroxene while inhibiting that of plagioclase. The intrusions in the overlying crust could represent, to first order, the secondary melts produced by the melt–harzburgite reaction, while the sills in the surrounding mantle may be cumulates from such secondary melts.These results shed light on processes occurring during interaction between rising off-axis material and depleted, hydrated lithospheric mantle. Furthermore, if our interpretation is correct, the low εNd values of the off-axis samples contribute to the growing body of evidence for the presence of pyroxenite veins in the MORB mantle source.
ISSN: 0012-821X

hal-01306575
https://hal.archives-ouvertes.fr/hal-01306575
DOI : 10.1016/j.epsl.2015.12.005

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Before attaining the mantle wedge, where they trigger partial melting, volatiles released from dehydration reactions in the slab have to migrate across a relatively cold (<750 degrees C), peridotite-layer above the incoming slab. In order to unravel the mechanisms allowing for this initial stage of fluid transport, we performed a detailed field and microstructural study of metamorphic prograde peridotites in the Cerro del Almirez ultramafic massif (Betic Cordillera, Spain), where evidences of one of the most important dehydration reactions in subduction zones, the high-pressure antigorite breakdown (P = 1.6-1.9 GPa and T approximate to 680 degrees C), can be mapped in the field. This reaction led to arborescent growth of centimeter-size olivine and orthopyroxene, producing a chlorite-harzburgite with a spinifex-like texture. Microstructural observations and crystal preferred (CPO) mapping show no evidences of solid-state deformation during the prograde growth of olivine and orthopyroxene at the expenses of antigorite. However, a few tens to a hundred meters away from the reaction front, the metamorphic texture is partially obliterated by grain-size reduction in roughly planar conjugate zones, a few mm to meters wide. Grain size reduction zones (GSRZ) are characterized by (1) sharp contacts with undeformed spinifex-like texture domains, (2) important reduction of the olivine grain size (60-250 mu m), (3) olivine color change from brownish to colorless, (4) decrease in the modal amount of orthopyroxene, and (5) at the mm- to cm-scale, irregular shapes and abrupt terminations. Field and microstructural observations exclude that relative displacement took place across these GSRZ. Changes in modal composition imply reactions with fluids undersaturated in silica. Analysis of olivine crystal-preferred orientations (CPO) in GSRZ shows patterns similar, but more dispersed, than those in neighboring spinifex-like domains. It also reveals mm- to cm-scale discrete domains with rather homogeneous crystallographic orientations suggesting inheritance from the preexisting spinifex-like olivines in the host peridotite. Misorientation angles between neighboring grains in the GSRZ show peaks at similar to 5-10 degrees and similar to 20 degrees, but rotations are not crystallographically controlled. Based on these observations, we rule out the formation of the GSRZ by dynamic recrystallization during dislocation creep and propose that they record brittle deformation (microcraking) of the spinifex-like chlorite-harzburgite, probably induced by hydrofracturing at high pressure and relative low temperature conditions (680-710 degrees C). High-pressure hydrofracturing can, thus, be invoked as an efficient mechanism for fluid flow across the cold top-slab mantle layer, hence allowing the slab-derived fluids to ingress in the wedge.
ISSN: 0012-821X

hal-00534035
https://hal.archives-ouvertes.fr/hal-00534035
DOI : 10.1016/j.epsl.2010.06.029

Éditeur(s) : HAL CCSD Oxford University Press (OUP)
Résumé : International audience
We report new structural, microstructural, petrological, and major- and trace-element data on ultramafic rocks from the Kondyor zoned ultramafic complex in Far-East Russia. The ultramafic rocks are subdivided into three subconcentric lithologies, from core to rim: (1) a metasomatic domain where generally phlogopite-rich dykes pervasively intrude dunite; (2) a main dunite core; (3) a pyroxenite rim. The ultramafic rocks have nearly vertical contacts with the surrounding Archaean basement (gneisses, quartzites and marbles) and hornfelsed Riphean sediments. The hornfelsed sediments show a relatively steep ( 60), outward dipping layering, which rapidly flattens to horizontal away from the inner contact. Although the Riphean sediments define a dome-like structure, the inward, shallow dipping foliation of the dunites indicates a synformal structure. Detailed petro-structural investigations indicate that the Kondyor dunites were deformed by solid-state flow under asthenospheric mantle conditions. The outward textural change from coarse- to fine-grained equigranular dunite and the outward-increasing abundance of subgrains and recrystallized olivine grains suggest dynamic recrystallization while fluid circulation was channelized within the core metasomatic zone, with a decreasing melt fraction from core to rim, and also suggest that solid-state deformation induced grain-size reduction towards the cooling border of the Kondyor massif. Based on their geochemistry, the dunites are interpreted as mantle rocks strongly affected by reaction with melts similar to the JurassicCretaceous Aldan Shield lamproites. Rim pyroxenites were formed by a melt-consuming peritectic reaction, implying the existence of at least a small, conductive thermal gradient around the dunite body while the latter was still at near-solidus temperature conditions. This suggests that the zoned structure of Kondyor was initiated at mantle depths, most probably within the subcontinental lithosphere. Upon cooling, the lamproitic melts were progressively focused in the central part of the massif and drained into vein conduits where they reacted with the wall-rock dunite. Two-dimensional numerical modelling based on finite-differences with a marker-in-cell technique incorporates temperature-dependent rheologies for both molten and non-molten host rocks. The modelling consolidates the structural, petrological and geochemical interpretations, which show that the dunites represent the synformal, flat-lying apex of an asthenospheric mantle diapir, triggered by fluid pressure channelized in the core, which nearly reached the Earths surface. We conclude that translithospheric mantle diapirism is an important mode of mass transfer in the Earth.
ISSN: 0022-3530

hal-00424508
https://hal.archives-ouvertes.fr/hal-00424508
DOI : 10.1093/petrology/egn083

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : Solidus phase relations of carbon dioxide-saturated (CO2 vapor) model peridotite in the system CaO-MgO-Al2O3-SiO2-CO2 in the 1.1-2.1 GPa pressure range are reported. The solidus has a positive slope in pressure-temperature (PT) space from 1.1 to 2 GPa. Between 2 and 2.1 GPa, the melting curve changes to a negative slope. From 1.1 to 1.9 GPa, the liquid, best described as CO2-bearing silicate liquid, is in equilibrium with forsterite, orthopyroxene, clinopyroxene, spinel, and vapor. At 2 GPa, the same crystalline phase assemblage plus vapor is in equilibrium with two liquids, which are silicate and carbonatitic in composition, making the solidus at 2 GPa PT invariant. The presence of two liquids is interpreted as being due to liquid immiscibility. Melting reactions written over 1.1-1.9 GPa are peritectic, with forsterite being produced upon melting, and the liquid is silicate in composition. Upon melting at 2.1 GPa, orthopyroxene is produced, and the liquid is carbonatitic in composition. Hence, the invariance between 1.9 and 2.1 GPa is not only the reason for the dramatic change in the liquid composition over an interval of 0.2 GPa, but the carbonated peridotite solidus ledge itself most likely appears because of this PT invariance. It is suggested that because carbonatitic liquid is produced at the highest solidus temperature at 2 GPa in PT space in the system studied, such liquids, in principle, can erupt through liquid immiscibility, as near-primary magmas from depths of approximately 60 km.
ISSN: 0148-0227

hal-00939406
https://hal.archives-ouvertes.fr/hal-00939406
DOI : 10.1002/jgrb.50249

Éditeur(s) : HAL CCSD Elsevier
Résumé : The ultramafic–mafic complexes located at the base of obducted paleo-island arcs are commonly interpreted as evidence for intra-crustal fractionation of primitive (high-Mg#) mantle melts. The present study, realized on the Jijal mafic–ultramafic basal section of the Cretaceous Kohistan oceanic arc (N Pakistan), discards a crystal fractionation model from a single parental magma to take into account the geochemical and isotope variations observed between the plutonic crust and the underlying ultramafic section. The basal ultramafic rocks, i.e. dunites, wehrlites and clinopyroxenites, show high Mg#, extremely depleted REE patterns, no marked HFSE anomalies and high LILE enrichment. Cpx and leached whole rocks from this unit yield restricted εNd values (+ 5.5 to + 6.8), a large εSr range (− 5.9 to + 8.8) and mainly radiogenic 207Pb/204Pb ratios. The overlying mafic section, i.e. gabbroic rocks, displays low Mg# (46 < Mg# < 54), enriched REE patterns and marked HFSE anomalies. These plutonic rocks have also very homogeneous Sr and Pb isotopic compositions defining a restricted domain, which does not overlap that of the ultramafic samples. Moreover, Cpx from the basal ultramafics yield an Sm–Nd isochron at 117 ± 7 Ma interpreted as dating crystallization of the ultramafic section. Together, these results indicate that the mafic rocks on one hand and the ultramafic rocks on the other hand, originate from separate sources with specific emplacement underneath the subduction zone. A lherzolite lens, collected from the top of the mafic section, plots on the early Cretaceous Sm–Nd isochron and therefore yields the same 143Nd/144Nd initial ratio. This suggests that the ultramafic part of the lower Kohistan arc complex sampled the initiation stages of the subduction with production of magmas with boninite-like features. At this stage, the mantle wedge has been already modified by percolation of the first slab-derived fluids. On such a scenario the lherzolite lens would correspond to the lithospheric mantle underneath the arc before its initiation. A multi-stage history is proposed for the evolution for the Kohistan arc through not, vert, similar 30 Ma. Stage #1 reflects the spontaneous initiation of subduction associated with extensive boninitic affinity magmatism, stages #2 and #3 are related to arc building by tholeiitic melts and, a fourth step (stage #4) corresponds to the intra-crustal differentiation.
ISSN: 0012-821X

hal-00407206
https://hal.archives-ouvertes.fr/hal-00407206
DOI : 10.1016/j.epsl.2007.06.026

Éditeur(s) : HAL CCSD
Résumé : This study provides additional constraints on the relations between deformation, hydration and percolation of fluids and melts in the subcontinental lithospheric mantle beneath a craton and a rift, as well as their implication on its geodynamical behaviour. I have analysed the microstructures, the CPOs, and the hydrogen content of mantle xenoliths from the Kaapvaal craton, and two sets of xenoliths from different localities along the East African Rift (North Tanzanian Divergence and SE Ethiopia).The coarse-granular microstructures and the well-defined CPOs in Kaapvaal peridotites suggest a deformation followed by a long quiescence time. Orthorhombic olivine CPOs predominates, but axial-[100] and axial-[010] are also measured. Cratonic peridotites record multiple metasomatic episodes, leading to a significant compositional heterogeneity, which cannot be imaged by seismic studies. Olivine hydrogen contents are variable, but tend to increase until 150 km depth, reaching up to 50 ppm wt. H2O. The deeper samples are almost dry. Piston-cylinder experiments on hydrogen diffusion between a volatile-rich kimberlitic melt and forsterite suggest that the presence of CO2 in the system could significantly decrease water fugacity and thus forsterite hydration. These experimental results indicate that the hydrogen contents measured in olivine were acquired during a metasomatic event rather than during xenolith extraction by kimberlites. However, this metasomatism was not followed by remobilization of the cratonic root.In the North Tanzanian Divergence, localities within the rift axis and the volcanic transverse belt (Lashaine and Olmani) show significant differences in microstructures and olivine CPO patterns. In Lashaine, coarse-granular microstructures and orthorhombic to axial-[100] CPO patterns in olivine can be explained by transpressional deformation during the formation of the Mozambique belt, or by the occurrence of a remnant of a cratonic domain embedded within the Mozambique belt. Within the rift axis, porphyroclastic to mylonitic microstructures suggest a recent rift-related deformation accompanied by syn-kinematic melt-rock reactions, and followed by variable annealing. The strong heterogeneity in microstructures and olivine CPO suggests that this deformation was acquired during multiple tectonic events probably linked to episodic magma percolation, separated by quiescence episodes. The axial-[100] patterns in olivine and the oblique fast directions reported by SKS studies are coherent with transtensional deformation within the lithospheric mantle beneath the rift.The peridotites from SE Ethiopia are less recrystallized than the rift-axis Tanzanian peridotites, displaying coarse-porphyroclastic microstructures. Microstructures and orthorhombic CPOs in olivine suggest syn- to post-metasomatic deformation. S-waves polarization anisotropies calculated for these samples cannot explain alone the delay times reported by SKS studies in this part of the East-African Rift.
Les travaux réalisés durant cette thèse apportent de nouvelles contraintes sur les relations entre déformation, hydratation et percolation de fluides et/ou de magmas dans le manteau subcontinental sous un craton et sous un rift, et leurs implications sur son comportement rhéologique. Il repose sur l'analyse des microstructures, des OPRs et des teneurs en hydrogène de xénolites mantelliques du craton du Kaapvaal, et sur deux séries de xénolites provenant de différentes localités le long du rift Est-Africain (Divergence Nord Tanzanienne et SE de l'Ethiopie). Les microstructures granulaires à gros grains et les OPRs bien définies des péridotites du craton du Kaapvaal sont cohérentes avec un épisode de déformation suivi d'une longue période de quiescence. Les OPRs de l'olivine sont majoritairement à symétrie orthorhombique, mais des symétries axiale-[100] et axiale-[010] sont aussi mesurées. Les péridotites cratoniques enregistrent de multiples épisodes métasomatiques, ayant entraîné une hétérogénéité de compositions à petite échelle ne pouvant être détectée par les études sismiques. Les teneurs en hydrogène mesurées dans l'olivine sont variables, mais ont tendance à augmenter jusqu'à 150 km de profondeur, atteignant alors jusqu'à 50 ppm wt. H2O. En dessous de cette profondeur, les échantillons montrent des teneurs en hydrogène très faibles. Les expériences réalisées en piston-cylindre sur la diffusion de l'hydrogène issue d'un liquide kimberlitique vers de la forstérite suggèrent que la fugacité en eau pourrait fortement être diminuée par la présence de CO2, empêchant l'hydratation de l'olivine durant extraction des xénolites par les kimberlites. Ces résultats expérimentaux suggèrent que les teneurs en hydrogène dans l'olivine des péridotites du craton du Kaapvaal ont été acquises durant un épisode métasomatique en profondeur et non pendant leur extraction par les kimberlites. Ces teneurs n'ont toutefois pas à ce jour entraîné de remobilisation de la racine cratonique. Enfin, le calcul des propriétés sismiques des péridotites cratoniques révèle que les anisotropies générées par les OPRs de ces échantillons sont suffisantes pour expliquer les anisotropies mesurées par les ondes SKS et les ondes de surface.Les xénolites de la Divergence Nord-Tanzanienne, montrent des variations significatives de microstructures et d'OPR de l'olivine entre les péridotites des localités dans l'axe du rift et celles de la chaîne volcanique transverse (Lashaine et Olmani). A Lashaine, les microstructures granulaires à gros grains et les OPRs de type orthorhombique et axial-[010] peuvent être expliquée par une déformation en transpression liée à la formation de la chaîne Mozambique ou par la présence d'une relique d'un domaine cratonique à l'intérieur de la chaîne Mozambique. Dans l'axe du rift, les microstructures porphyroclastiques à mylonitiques suggèrent une déformation plus récente, accompagnée de réactions magma-roche sous des conditions proches du solidus, suivie d'un recuit variable. L'hétérogénéité des microstructures enregistrées par les échantillons du rift suggère de multiples épisodes de déformation localisée, probablement liés à l'injection percolation épisodique de magmas, espacés de périodes d'accalmie. Les OPRs de l'olivine de type axial-[100] et l'orientation des directions de polarisation des ondes SKS suggère que le rift s'est formé en régime de transtension Les péridotites du Sud-Est de l’Éthiopie présentent des microstructures porphyroclastiques à gros grains moins recristallisées qu'en Tanzanie. Les microstructures et les OPRs principalement de type orthorhombique suggèrent une déformation syn- à post-métasomatisme. Les anisotropies de polarisation des ondes S calculées pour ces échantillons sont insuffisantes pour expliquer à elles seules les déphasages des ondes SKS dans cette partie du rift.
https://tel.archives-ouvertes.fr/tel-01684759

Droits : info:eu-repo/semantics/OpenAccess
NNT : 2014MON20139
tel-01684759
https://tel.archives-ouvertes.fr/tel-01684759
https://tel.archives-ouvertes.fr/tel-01684759/document
https://tel.archives-ouvertes.fr/tel-01684759/file/43443_BAPTISTE_2014_archivage_cor.pdf

Éditeur(s) : HAL CCSD Springer Verlag
Résumé : International audience
North Tanzanian Divergence is the first stage of continental break-up of East African Rift (<6 Ma) and is one of the most concentrated areas of carbonatite magmatism on Earth, with singular Oldoinyo Lengai and Kerimasi volcanoes. Hanang volcano is the southernmost volcano in the North Tanzanian Divergence and the earliest stage of rift initiation. Hanang volcano erupted silica-undersaturated alkaline lavas with zoned clinopyroxene, nepheline, andradite-schorlomite, titanite, apatite, and pyrrhotite. Lavas are low MgO-nephelinite with low Mg# and high silica content (Mg# = 22.4–35.2, SiO2 = 44.2–46.7 wt%, respectively), high incompatible element concentrations (e.g. REE, Ba, Sr) and display Nb–Ta fractionation (Nb/Ta = 36–61). Major elements of whole rock are consistent with magmatic differentiation by fractional crystallization from a parental melt with melilititic composition. Although fractional crystallization occurred at 9–12 km and can be considered as an important process leading to nephelinite magma, the complex zonation of cpx (e.g. abrupt change of Mg#, Nb/Ta, and H2O) and trace element patterns of nephelinites recorded magmatic differentiation involving open system with carbonate–silicate immiscibility and primary melilititic melt replenishment. The low water content of clinopyroxene (3–25 ppm wt. H2O) indicates that at least 0.3 wt% H2O was present at depth during carbonate-rich nephelinite crystallization at 340–640 MPa and 1050–1100 °C. Mg-poor nephelinites from Hanang represent an early stage of the evolution path towards carbonatitic magmatism as observed in Oldoinyo Lengai. Paragenesis and geochemistry of Hanang nephelinites require the presence of CO2-rich melilititic liquid in the southern part of North Tanzanian Divergence and carbonate-rich melt percolations after deep partial melting of CO2-rich oxidized mantle source.
ISSN: 0010-7999

hal-01467390
https://hal.archives-ouvertes.fr/hal-01467390
DOI : 10.1007/s00410-016-1273-5

Éditeur(s) : HAL CCSD American Geophysical Union - AGU
Résumé : IODP Expedition 335 "Superfast Spreading Rate Crust 4" returned to ODP Hole 1256D with the intent of deepening this reference penetration of intact ocean crust several hundred meters into cumulate gabbros. This was the fourth cruise of the superfast campaign to understand the formation of oceanic crust accreted at fast spreading ridges, by exploiting the inverse relationship between spreading rate and the depth to low velocity zones seismically imaged at active mid-ocean zones, thought to be magma chambers. Site 1256 is located on 15-million-year-old crust formed at the East Pacific Rise during an episode of superfast ocean spreading (>200 mm/yr full rate). Three earlier cruises to Hole 1256D have drilled through the sediments, lavas and dikes and 100 m into a complex dike-gabbro transition zone. The specific objectives of IODP Expedition 335 were to: (1) test models of magmatic accretion at fast spreading ocean ridges; (2) quantify the vigor of hydrothermal cooling of the lower crust; (3) establish the geological meaning of the seismic Layer 2-3 boundary at Site 1256; and (4) estimate the contribution of lower crustal gabbros to marine magnetic anomalies. It was anticipated that even a shortened IODP Expedition could deepen Hole 1256D a significant distance (300 m) into cumulate gabbros. Operations on IODP Expedition 335 proved challenging from the outset with almost three weeks spent re-opening and securing unstable sections of the Hole. When coring commenced, the destruction of a hard-formation C9 rotary coring bit at the bottom of the hole required further remedial operations to remove junk and huge volumes of accumulated drill cuttings. Hole-cleaning operations using junk baskets returned large samples of a contact-metamorphic aureole between the sheeted dikes and a major heat source below. These large (up to 3.5 kg) irregular samples preserve magmatic, hydrothermal and structural relationships hitherto unseen because of the narrow diameter of drill core and previous poor core recovery. Including the ~60 m-thick zone of granoblastic dikes overlying the uppermost gabbro, the dike-gabbro transition zone at Site 1256 is over 170 m thick, of which more than 100 m are recrystallized granoblastic basalts. This zone records a dynamically evolving thermal boundary layer between the principally hydrothermal domain of the upper crust and a deeper zone of intrusive magmatism. The recovered samples document a sequence of evolving geological conditions and the intimate coupling between temporally and spatially intercalated intrusive, hydrothermal, contact-metamorphic, partial melting and retrogressive processes. Despite the operational challenges, we achieved a minor depth advance to 1522 m, but this was insufficient penetration to complete any of the primary objectives. However, Hole 1256D has been thoroughly cleared of junk and drill cuttings that have hampered operations during this and previous Expeditions. At the end of Expedition 335, we briefly resumed coring and stabilized problematic intervals with cement. Hole 1256D is open to its full depth and ready for further deepening in the near future.
InterRidge News

hal-00688821
https://hal.archives-ouvertes.fr/hal-00688821

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
A laser ablation ICP-MS U-Pb age of 17.84 +/- 0.12 Ma (late Burdigalian) was obtained from monazites separated from a leucocratic diatexite collected in close proximity to a small peridotite massif incorporated into the lower crustal sequence of the Edough Massif (north-eastern Algeria), a southern segment of the peri-Mediterranean Alpine Belt. Monazites extracted from a neighbouring deformed leucogranite intruding early Paleozoic phyllites yield a consistent age of 17.4 +/- 1.3 Ma. Zircons occurring in the same leucogranite, with magmatic characteristics, have an age of 308 +/- 7 Ma interpreted as dating magmatic crystallisation of the leucogranite and reflecting partial melting during the Hercynian orogeny. Low Th/U domains (Th/U<0.10) from the same grains substantiate recrystallisation during a younger metamorphic event whose upper age limit is 286 +/- 11 Ma. These results emphasize the polycyclic evolution of basement rocks preserved in the crystalline units of the western Mediterranean and indicate that part of their metamorphic features were inherited from older, Hercynian, events. Taken together with published Ar-Ar dates, the late Burdigalian age of monazites indicates a rapid cooling rate of c. 370 degrees C/Ma and is regarded as closely approximating the emplacement of the peridotites into the Hercynian basement. The monazite ages are significantly younger than those recorded for orogenic peridotites from the Betic-Rif oroctine and for the timing of lithospheric extension forming the Alboran sea. It is also younger than rifting and back-arc extension opening the Liguro-Provencal basin. The late Burdigalian age is interpreted as dating the incipient rifting event that opened the Algerian basin, which is consequently not a continuation of the Liguro-Provencal basin. At the scale of the western Mediterranean, these observations concur with current models supporting slab roll-back and an eastwards migration of extension in the western Mediterranean, but suggest that the Algerian basin opened as a result of torsion and stretching of the Thethyan slab due to its steepening under the Alboran microplate.
ISSN: 0009-2541

hal-00424511
https://hal.archives-ouvertes.fr/hal-00424511
DOI : 10.1016/j.chemgeo.2008.11.016

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
At oceanic spreading centers, interactions between magma and hydrothermal convecting systems trigger major physical, thermal, and chemical exchanges. The two-pyroxene hornfels recovered from the base of the sheeted dike sequence at Integrated Ocean Drilling Program (IODP) Site 1256 (equatorial Eastern Pacific) are interpreted as a conducting boundary layer between the underlying axial melt lens and the hydrothermally cooled sheeted dikes. They are cut by numerous small, felsic veins, which were recently interpreted as a product of hydrous partial melting of sheeted dikes. Here, we present trace element compositions of products (melts and residues) of hydrous partial melting experiments using basalts and hornfels from IODP Site 1256 as starting material. The experimental products generated between 910 °C and 970 °C match the natural lithologies from Site 1256 in terms of major and trace element compositions. The compositions of the anatectic melts correspond to the compositions of the felsic veins, while the residual minerals match the compositions of the two-pyroxene hornfels, evidencing that hydrous partial melting is an important magmatic process in the gabbro/dike transition of fast-spreading mid-oceanic ridges. Our results complement previous experimental studies on anatectic processes occurring at the roof of the magma chambers from fast-spreading mid-ocean ridges. Moreover, calculations of mixing and assimilation fractional crystallization using the experimental partial melts as contaminant/assimilant showed that anatectic melts can only be a minor contributor to the contamination process.
ISSN: 0024-4937

hal-01419949
https://hal.archives-ouvertes.fr/hal-01419949
DOI : 10.1016/j.lithos.2016.05.001

Éditeur(s) : HAL CCSD Oxford University Press (OUP)
Résumé : International audience
The processes active in the deep crust above an oceanic subduction zone during its evolution have been constrained through a detailed geochemical study (major and trace elements and Sr, Nd and Pb isotopes) of representative samples through an 30 km thick exhumed crustal section of the Cretaceous Kohistan oceanic island arc (Northern Pakistan). The use of both trace elements and radiogenic isotopes reveals two distinct geochemical suites (suites A and B) within the JijalPatanKiruKamila (JPKK) complex. Suite A is characterized by a progressive enrichment in Pb-207 and a decrease in Nd-143/Nd-144 with increasing La-N/Sm-N. Suite B has higher Pb-207/Pb-204 and lower Nd-143/Nd-144 ratios with approximately constant La-N/Sm-N. By combining trace elements with different partitioning behaviour it is demonstrated that there is an increasing contribution of the subduction component in the magmas with time. It is also possible to distinguish a slab component imprint carried by aqueous fluids from one corresponding to sediment melts. Intrusive granites are abundant in the upper levels of the JPKK section. All were generated at the arc root level (Jijal crustal section) during dehydration-melting of hornblende-rich plutonic rocks. A three-stage geodynamic model is proposed for the evolution of the arc over a period of 30 Myr. The first stage (117105 Ma) starts with the onset of subduction, which was followed by the building of the volcanic arc. The second stage (10599 Ma to 9691 Ma) corresponds to a major igneous event, which was characterized by abundant magma underplating and granulite-facies metamorphism at the arc base. Recycling of the residualcumulative lower crust into the convective asthenospheric mantle was efficient during this stage, and was probably related to thermo-mechanical erosion of the base of the crust. The last stage (9585 Ma) corresponds to a period of low magmatic activity, which marked the end of the intra-oceanic subduction. This is related to the formation of a cold blanket above the slab surface as a result of thermo-mechanical erosion of the cold walls of the subduction zone (i.e. the upper part of the slab and the base of the overriding plate), and corner flow dragging the cold material into the zone of melt generation. Ultimately, a voluminous magmatic pulse occurred around 85 Ma (forming the Chilas complex), before arccontinent collision.
ISSN: 0022-3530

hal-00420068
https://hal.archives-ouvertes.fr/hal-00420068
DOI : 10.1093/petrology/egp010

Éditeur(s) : HAL CCSD
Résumé : National audience
New experimental data on electrical and anelastic properties of oceanic rocks at high pressures and temperatures are compared with the field data of seismic and electrical anomalies observed at oceanic spreading centers. The laboratory results of electrical conductivity and internal friction on gabbro and peridotites permit to estimate a degree of partial melting and maximum temperature in axial magma chambers (12-15% of melting at 1155-1165°C) and at the upper boundary of a source zone at the depth of 40-90 km (less than 5% of melting in the absence of pyroxene crystals and up to 11-14% in the pyroxene reach rocks at 1360-1370°C) at mid-oceanic ridges.
ISSN: 0934-6554

hal-01322920
http://hal.univ-reunion.fr/hal-01322920

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The oxygen fugacity and therefore the iron redox state of a melt is known to have a strong influence on the liquid line of descent of magmas and thus on the composition of the coexisting melts and crystals. We present a new method to estimate this critical parameter from electron probe microanalyses of two of the most common minerals of basaltic series, plagioclase and clinopyroxene. This method is not based on stoichiometric calculations, but on the different partitioning behaviour of Fe3+ and Fe2+ between both minerals and a melt phase: plagioclase can incorporate more Fe3+ than Fe2+, while clinopyroxene can incorporate more Fe2+ than Fe3+. For example, the effect of oxidizing a partly molten basaltic system (Fe3+ is stabilized with respect to Fe2+) results in an increase of FeOtotal in plagioclase, but a decrease in the associated clinopyroxene. We propose an equation, based on published partition coefficients, that allows estimating the redox state of a melt from these considerations. An application to a set of experimental and natural data attests the validity of the proposed model. The associated error can be calculated and is on average <1 log unit of the prevailing oxygen fugacity.;In order to reduce the number of different variables influencing the Fe2+/Fe3+ mineral/melt equilibrium, our model is restricted to basaltic series with SiO2<60% that have crystallized at intermediate to low pressure (<0.5 GPa) and under relatively oxidizing conditions (Delta FMQ>0; where FMQ is the fayalite-magnetite-quartz oxygen buffer equilibrium), but it may be parameterized for other conditions. A spreadsheet is provided to assist the use of equations, and to perform the error propagation analysis.
ISSN: 0377-0273

hal-00475550
https://hal.archives-ouvertes.fr/hal-00475550
DOI : 10.1016/j.jvolgeores.2009.11.023

Éditeur(s) : Soc Geol France
Résumé : The Lesser Antilles subduction zone has produced no recent strong thrust earthquakes, making it difficult to quantify the seismic hazard from such events. The Lesser Antilles arc has a low subduction rate and an accretionary wedge that is very wide at its southern end. To investigate the effect of the wedge on seismogenesis, numerical models of forearc thermal structure were constructed along six transects perpendicular to the arc in order to determine the thermally predicted width of the seismogenic zone. The geometry of each section is constrained by published seismic profiles and crustal models derived from gravity and seismic data and by earthquake hypocenters at depth. A major constraint on the deep part of the model is that mantle temperature beneath the volcanic arc should achieve a temperature of 1,100 degrees C to generate partial melts. Predicted surface heat flow is compared to the available heat flow observations. Thermal modeling results indicate a systematic southward increase in the width of the seismogenic zone, more than doubling in width from north to south and corresponding to a dramatic southward increase in forearc width (distance from the arc to the deformation front of the accretionary wedge). The minimum width of the seismogenic zone (distance between the intersections of the subduction interface with the 150 degrees C and 350 degrees C isotherms) increases from about 80 km, north of 16 degrees N, to 230 km, at 13 degrees N. The maximum width (between the 100 degrees C and 450 degrees C isotherms) ranges from about 150 km in the north to up to 320 km in the south. This large variation in the width of the seismogenic zone is a consequence of the increasing width of the accretionary wedge to the south, caused by the increased thickness of sediment on the subducting plate. There is good agreement between the thermally predicted seismogenic limits and the sparse distribution of recorded thrust earthquakes, which are observed only in the northern portion of the arc. Possible scenarios for mega-thrust earthquakes are discussed. Depending on the segment length (along-strike) of the rupture plane, the occurrence of an event of magnitude 8-9 cannot be excluded.
L’absence de grands séismes récents à mécanismes chevauchants dans la zone de subduction des Petites Antilles rend difficile l’évaluation de l’aléa sismique lié à de tels événements. L’arc des Petites Antilles est caractérisé par une faible vitesse de subduction et par la présence d’un prisme d’accrétion très développé à son extrémité méridionale. Afin d’évaluer les effets de la largeur de ce prisme sur la genèse des séismes, nous avons étudié six sections perpendiculaires à l’arc, du nord au sud de celui-ci, pour déterminer la largeur de la zone sismogène prédite par les modèles thermiques appliqués à chacune de ces coupes. La géométrie de ces dernières est contrainte par les profils sismiques publiés, par les modèles de structure crustale déduits des données gravitaires et sismiques, et enfin par la distribution des hypocentres des séismes. Un contrôle important permettant de tester la validité des modèles thermiques en profondeur est qu’une température minimale de 1 100oC, compatible avec la fusion partielle du manteau hydraté, doit être atteinte sous l’arc volcanique actif. Par ailleurs, le flux thermique en surface prédit par ces modèles doit être compatible avec les mesures de flux de chaleur. Les modèles thermiques retenus d’après ces critères montrent une augmentation du simple au double vers le sud de la largeur de la zone sismogène, qui correspond à un élargissement considérable de la taille du domaine avant-arc. En effet, la largeur minimale de la zone sismogène (définie comme la distance entre les intersections de l’interface des plaques avec les isothermes 150o et 350oC) augmente d’environ 80 km au nord de 16oN jusqu’à 230 km à 13oN. La largeur maximale de cette zone (définie par les intersections de l’interface avec les isothermes 100o et 450oC) augmente, quant à elle, d’environ 150 km au nord jusqu’à 320 km au sud de l’arc. Cette variation considérable est la conséquence de l’augmentation de la largeur du prisme d’accrétion, elle-même causée par l’accumulation croissante des sédiments déposés sur la plaque plongeante. Les largeurs de la zone sismogène prédites à l’aide des modèles thermiques sont en bon accord avec les rares données disponibles sur les séismes à mécanismes chevauchants dans la partie nord de l’arc. Les scénarios possibles relatifs à des méga-séismes de ce type n’excluent pas de futurs événements atteignant des magnitudes de 8 à 9.
Bulletin De La Societe Geologique De France (0037-9409) (Soc Geol France), 2013 , Vol. 184 , N. 1-2 , P. 47-59

Droits : 2013 Societe Geologique de France
http://archimer.ifremer.fr/doc/00140/25140/29432.pdf
DOI:10.2113/gssgfbull.184.1-2.47
http://archimer.ifremer.fr/doc/00140/25140/

Éditeur(s) : HAL CCSD Wiley-Blackwell
Résumé : International audience
Platinum-group element (PGE) abundances in mantle rocks are generally considered to result from a late meteorite addition to the early Earth, post-dating the core separation event. As such, PGEs are key tracers for the Earth accretion history. For decades, the PGEs systematics of undepleted mantle peridotites has been used to constrain the composition of meteorite impactors involved in the late veneer material. Despite multiple evidence of considerable modifications by partial melting, harzburgites from the Sumail ophiolite (Oman) display a mean PGE composition very akin to recently refined estimates for the Primitive Upper Mantle (PUM) of the Earth. These rocks document a resetting of the PUM signature by percolating basaltic melts, which precipitated Pd-enriched Cu-Ni sulphides within a strongly Pd-depleted residual harzburgitic protolith. Such a resetting casts doubt on both the reliability of any PUM estimates and relevance of the PUM concept itself, at least for PGEs.
ISSN: 0954-4879

hal-00413122
https://hal.archives-ouvertes.fr/hal-00413122
DOI : 10.1111/j.1365-3121.2008.00850.x

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
A variety of atypical plume-like structures and focused upwellings that are not rooted in the lower mantle have recently been discussed, and seismological imaging has shown ubiquitous small-scale convection in the uppermost mantle in regions such as the Mediterranean region, the western US, and around the western Pacific. We argue that the three-dimensional return flow and slab fragmentation associated with complex oceanic subduction trajectories within the upper mantle can generate focused upwellings and that these may play a significant role in regional tectonics. The testable surface expressions of this process are the outside-arc alkaline volcanism, topographic swell, and low-velocity seismic anomalies associated with partial melt. Using three-dimensional, simplified numerical subduction models, we show that focused upwellings can be generated both ahead of the slab in the back-arc region (though -five times further inward from the trench than arc-volcanism) and around the lateral edges of the slab (in the order of 100 km away from slab edges). Vertical mass transport, and by inference the associated decompression melting, in these regions appears strongly correlated with the interplay between relative trench motion and subduction velocities. The upward flux of material from the depths is expected to be most pronounced during the first phase of slab descent into the upper mantle or during slab fragmentation. We discuss representative case histories from the Pacific and the Mediterranean where we find possible evidence for such slab-related volcanism.
ISSN: 0012-821X

hal-00553075
https://hal.archives-ouvertes.fr/hal-00553075
DOI : 10.1016/j.epsl.2010.08.012